New FMx13 HBX 6x4 Rigid B-Ride

New FMx13 HBX 6x4 Rigid B-Ride
Volvo Trucks. Driving Progress
New FMx13 HBX 6x4 Rigid B-Ride - Construction FM 64 R3HBX
3002
,441
Cab 2490
Chassis Dimensions [mm]
WB Wheelbase
3200
3400
3700
3900
4600
A
D
N
N
Overall Chassis Length
Centre of rear axle to front of body
Rear Overhang (Min)
Rear Overhang (Max)
7865
2603
1225
1775
8165
2803
1225
1875
8615
3103
1225
2025
8915 10015 10465
3303 4003 4303
1225 1225 1225
2125 2525 2675
T
Y
Y
W
W
Theoretical Wheelbase
Centre of Gravity for Payload (Min)
Centre of Gravity for Payload (Max)
Body Length (Min)
Body Length (Max)
3885
-352
-352
5911
5911
4085
-338
-338
6282
6282
4385
-317
-317
6839
6839
4585
-303
-303
7197
7197
5285
-259
-259
8387
8387
4900
5585
-242
-242
8897
8897
Chassis Weights [kg]
Front Axle
Rear Bogie
Kerb Weight
Payload (including body, driver, fuel etc)
4930 4940 4955 4965 5010 5025
3575 3580 3600 3615 3680 3720
8505 8520 8555 8580 8690 8745
12495 12480 12445 12420 12310 12255
Turning Diameter [mm]
Turning Circle Diameter Kerb to Kerb
Turning Circle Diameter Wall to Wall
Plated Weights [kg]
Gross Vehicle Weight
Gross Combination Weight
Front Axle
Rear Bogie
13900 14500 15400 16000 18200 19100
15400 16000 16900 17500 19700 20600
Plated
Design
21000
44000
6000
15000
27500
44000
6500
21000
Important Notes
Chassis Dimensions
Cab Height: +416 mm for CAB-HSLP.
Front Axle to Back of Cab: +399 mm for CAB-HSLP and CAB-SLP.
D-measure includes a front clearance of 50 mm and for rigid trucks also a
subframe of 100 mm.
Height can vary ± 20 mm for leaf and ± 10 mm for air suspension.
All dimensions are for unladen chassis and any tag axles down. Chassis height
used: CHH-HIGH.
Rear overhang used for vehicle weight calculation is the maximum rear
overhang (N Max) for selected wheelbase.
Height change when chassis height CHH-MED,FRAME300: +21,72009 mm.
Weight and dimensions are based upon the following tyres:
Front Axle Tyres:
295/80R22.5
Drive Axle Tyres:
295/80R22.5
Chassis weight includes oil, water, AdBlue, 70 litres fuel and without
driver. Kerb weight can vary ± 3%.
Turning diameters are theoretically calculated.
Legal weights can differ from country to country.
For more detailed weight information, including optional equipment weights,
ask your Volvo sales contact to enter your specification into the Volvo Weight
Information system (WIS).
Do NOT use this drawing for bodybuilding. Refer to Volvo Bodybuilder
Instructions and chassis assembly drawing FM64R3HBX.
1 (4)
Ref: FM 64 R3HBX16 NZL 2014-09-18 ENGAU
New FMx13 HBX 6x4 Rigid B-Ride - Construction FM 64 R3HBX
Truck use
□ TRBR-STA
Stationary trailer brake control
□ RC-ROUGH
Operating class on/off road
□ TRB-STRE
Automatic trailer brake activation (stretch brake)
□ TIPP-PRE
■ UNIFORM
Tipper preparation
Basic uniform vehicle
□ ATANK-AL
Aluminium airtanks
■ TL-LED
LED tail lights
Core components
Rims and Tyres
■ FMX-DAY
□ FMX-SLP
Day cab
Sleeper cab
■ EU5SCR-M
Eu5 SCR Selective Catalytic Reduction ( mandatory )
■ D13C460
□ D13C500
Engine, 13C litre, 460hp, 2300nm
Engine, 13C litre, 500hp, 2500nm
■ EBR-VEB+
Volvo Engine Brake + (VEB+)
□ AT2612D
□ PT2606
■ VT2514B
Volvo I-shift 12 speed automatic transmission (2600nm )
Powertronic 6 speed transmission ( 2600nm )
Volvo 14 speed manual transmission ( 2500nm )
■ RTS2370B
Single reduction tandem 23t GCW70t
■
□
□
□
Packages
■ AUDHIG
Sound system-advanced
RT-ALDPD
RT-ALDU
RT-ALPDU
RT-STEEL
10 stud dura-bright alloy disc rims
10 stud alloy disc rims
10 stud polished alloy disc rims
10 stud steel disc rims
□ SPWT-D
□ SPWT-F
Spare rim & tyre equal to drive
Spare rim & tyre equal to steer
□ SWCP-T2
Transport mounted spare wheel
■ JACK-12T
□ JACK-15T
12 tonne capacity jack with brace
15 tonne capacity jack and brace
■ TOOLKIT
Tool kit complete
■ INFLAHOS
Tyre inflation hose (20 metres)
Powertrain equipment
□ TP-DICON
Chassis
■ FST-PAR
□ FST-PAR3
Parabolic leaf spring front suspension
3 leaf parabolic front springs (stiffer than normal)
□ TP-FUEC
□ TP-HD
Distribution and Construction optimized gear changing
software
Fuel optimized gear changing software
Heavy duty (GCM) control software
■ FAL6.5
□ FAL7.5
Front axle load 6.5 tonnes
Front axle load 7.5 tonnes
□ AMSO-AUT
Manual gear shift in automatic mode.
□ AVO-ENH
AMT Vocational option - enhanced
□ APF-ENH
Enhanced I-shift PTO functions
□ CD40B-O
■ CS43B-O
Volvo 400mm twin plate clutch
Volvo 430mm single plate clutch
□ TC-HWO
■ TC-MAOH2
□ TC-MWOH2
Transmission Oil Cooler
High performance transmission cooler
High performance transmission cooler
■ AIRIN-HI
High air intake, roofline position
■ ACL1ST-S
Air cleaner with two stage filter element
■ 24AL120B
□ 24AL150B
High capacity alternator, 120 Ampere.
Alternator, 150 Ampere
□ TRAP-HD
Heay Duty Transmission Internals
□ PTER-100
□ PTER-DIN
□ PTER1400
PTO engine rear mounted with flange DIN100/ISO7646
Power Take Off / splined shaft groove (female) DIN5462.
Rear engine mounted power-take-off with flange SAE 1410
□
□
□
□
□
□
□
□
□
□
HPE-F101
HPE-F41
HPE-F51
HPE-F61
HPE-F81
HPE-T53
HPE-T70
HPE-V120
HPE-V45
HPE-V75
F1-101 Hydraulic pump rear engine mounted
F1-41 Hydraulic pump rear engine mounted
F1-51 Hydraulic pump rear engine mounted
F1-61 Hydraulic pump rear engine mounted
F1-81 Hydraulic pump rear engine mounted
F2-53/53 twin flow hyd pump rear engine mounted
F2-70/53 twin flow hyd pump rear engine mounted
V1-120 variable pump rear engine mounted
V1-45 variable pump rear engine mounted
V1-75 variable pump rear engine mounted
□
□
□
□
□
□
□
□
□
□
PTPT-D
PTPT-F
PTR-D
PTR-DH
PTR-DM
PTR-F
PTR-FH
PTR-FL
PTRD-D
PTRD-D1
□ FSTAB
□ FSTAB2
■ FSTAB3
Front stabilizer, normal stiffness
Front stabiliser bar increased stiffness
Heavy duty front stabiliser bar
■ RAL21
Rear suspension load rating: 21,000 kg
□ RSTAB1
Rear stabiliser bar
□ ACTST-TO
Volvo Dynamic Steering
■ EBS-MED
Electronic Brake System (EBS) contains
ABS, Traction control, Hill start aid
Diff lock control, Brake assist
Wheel brake monitoring, EBS status
■ FST7070
□ FST8080
Frame section thickness 7mm
Frame section thickness 8mm
□
■
□
□
□
Liner (inner) from end of engine to end of frame
Liner (inner) - front of bogie to end of bogie
Liner (inner)- front of bogie to end of frame
Liner (inner) - trans x-mem to end of bogie
Liner (inner) - trans x-mem to end of frame
FIL-EEEF
FIL-FBEB
FIL-FBEF
FIL-TXEB
FIL-TXEF
■ BBOX-L
Battery box mounted on LHS chassis rail
■ 2BATT225
2x225 Ah batteries
□ BATTIND
Battery charge indicator (in the DID)
■ MSWI-C
□ MSWI-R
Isolation toggle switch LHS of chassis
Isolation switch on key fob (press door lock twice to isolate)
■ R415A66
RHS 415 litre alloy fuel tank w/o step
Min volume 415l
Max volume 465l
■ UL-FUEL
LHS fuel tank not fitted
■ ADB064
□ ADB090
AdBlue tank 64 litres (LHS)
AdBlue tank 90 litres (LHS)
■ FCAP-L
Fuel tank cap with lock
■ ESH-RIGH
□ ESH-VERT
Muffler horizontal, right exhaust outlet
Muffler horizontal, vertical exhaust outlet on right hand side
□ EXST-SSP
Polished stainless steel exhaust stack
□ TBC-NZL
Trailer brake connections (suzi coils)
□ PTRD-D2
□ PTRD-F
PTO DIN / Powertronic
PTO flange conn / Powertronic
Low speed PTO with DIN connection
High speed PTO with DIN connection
Medium speed PTO with DIN connection
Rear PTO trans.flange 100% speed
High speed PTO with flange connection
Low speed PTO with flange connection
PTO with 2 DIN connections rear + 1 DIN connection front
PTO with 1 DIN + 1 flange connection rear + 1 DIN connection
front
PTO with 2 flange connection rears + 1 DIN connection front
PTO with 1 DIN + 1 flange connection rear
□ TRBR-HCR
Hand controlled trailer brake, reduced pressure
□ HPG-F101
F1-101 hydraulic pump gearbox mounted
■ Standard Equipment
□ Optional Equipment
For more detailed information about cab and powertrain equipment, please refer to separate specification sheets.
For all possible options and combinations of options please consult your Volvo sales contact who can create a specification to match your requirements using the
Volvo Sales Support system (VSS).
The factory reserves the right to modify design and change equipment without previous notification.
The specification can vary from country to country.
2 (4)
Ref: FM 64 R3HBX16 NZL 2014-09-18 ENGAU
New FMx13 HBX 6x4 Rigid B-Ride - Construction FM 64 R3HBX
□
□
□
□
F1-41 hydraulic pump gearbox mounted
F1-61 hydraulic pump gearbox mounted
F1-81 hydraulic pump gearbox mounted
VP1-120 hydraulic pump gearbox mounted
□ INLI-NL
Interior white and red (night) light
□ ARL-FLEX
Flexible reading lamp (snake light)
■ RH-MSR
Roof hatch-manual - steel - rear opening
□ EIDLESD
Engine idle shutdown (2.5 minutes)
Cab exterior
■ INST-MED
Mechanical instrument cluster with DID.
■ PAICS-B
Grey mirrors, sun visor, instep & bumper
□ CRUIS-E
■ CRUISEC
Cruise control (use with TP-FUEC or TP-FUEC3)
Cruise control
■ AWIND-RF
Cab rear window- fitted
■ ESP-BAS1
□ SWIND-PS
Cab passenger side aux. window
ESP package (trailer combinations with ABS)
□ LCS
Lane change support
■ LOCK-MAN
□ LOCK-REM
Manual door locking
Central door locking with remote control
□ RSENS-W
Rain sensor to activate wipers
■ BUMP-HD
Bumper-heavy duty
□ CU-ECC
■ CU-MCC
Climate controlled air conditioning
Manual controlled air conditioning
□ GUARD-EH
Guard plate for cooling pipes and oil sump
□ IMMOBIL
Engine immobiliser
□ SIDEH-B
□ SIDSTP-R
Side handle ( driver's side )
Side ladder with handle ( driver's side )
□ ALARM-B
Anti-theft alarm (cab)
■ BUGNET
Insect net in front of radiator
■ WLIFT-EB
Electric windows
■ ISUNS-DS
Interior side sunvisor - driver's door
□ CTILTP-E
■ CTILTP-M
Electrical cab tilt pump
Manual cab tilt pump
■ ISUNF-B
□ ISUNF-MD
Interior front sunvisor-standard
Interior front sunvisor- with mirror (driver's side)
□ FCABS-A
■ FCABS-M
Front cab suspension-air bellows
Front cab suspension-mechanical spring
■ CSPU-S
Upper-cup holders & lower-storage area
□ RCABS-A
■ RCABS-M
Rear cab suspension-air bellows
Rear cab suspension-mechanical spring
■ BUPALARM
Reverse alarm
■ MIRCOMFX
Heated & elec. operated both sides. (convex )
□ BUPMON
Back-up monitor
■ SUNV-H
Exterior sunvisor
□ REMC-MF
Multifunction wireless remote control
□ AD-ROOF
Aero-dynamic roof mounted deflector
■ FIREX25A
Fire extinguisher 2.5 kg
□ AD-SIDES
Aero-dynamic cab side deflectors
■ WRITEPAD
Storable steering wheel fit clip board
□ GUARD-W
Windscreen stoneguard
■ UPHTRI01
Vinyl & Textile trim
■ HL-BAS2
Heavy duty headlamps
■ DST-CF5
Fully adjustable driver's comfort seat
Air suspension, heated, integrated safety belt
□ HL-CLEAN
Head lamp cleaning system
■ SBPRE-DS
Drivers seat belt pretensioner
■ HLP-ST
□ HLP-ST2
Headlamp protection-steel
Headlamp protection-steel/wire mesh (non ADR compliant)
■ PST-BAS1
□ PST-BENC
□ PST-CF5
Basic passenger's seat
Passenger bench seat
Fully adjustable passenger comfort seat
Air suspension, heated, safety belt
□ HL-ADJ
Head lamp adjustment
■ DRL-LED
V-shaped LED daytime running light
■ IDLAMP-A
Identification lamps-amber
□ BEACON-P
Beacon light wire preparation
□ SPOTP-F
Aux spotlamp preparation, 280W maximum
□ ANT-CBR
Antenna for CB radio, single antenna
HPG-F41
HPG-F61
HPG-F81
HPG-V120
□ SBPRE-PS
Passenger seatbelt pretensioner
□ ARM-DBPS
□ ARMRE-BB
■ ARMRE-DB
Armrests driver's both sides - passenger side single
Armrests both sides - driver's & passenger's seat
Armrests both sides - driver's seat
■ ARU-BAS
Seat armrest upholstery - basic
■ GRABHI-B
Superstructure
Instep grab handle - standard
■ FMAT-RU2
□ FMAT-TX2
Floor mats-rubber (extended side)
Floor mats-textile & rubber
□ SRWL-2RW
□ SRWL-PK
□ LBK-RES
□ LBK70
■ ULBK
Foldable rest kit
Lower bunk 700mm wide
Without lower bunk
□ MATL-SF
Mattress lower bunk - semi firm
□ OLMAT-BA
Mattress overlay - basic
□ SAFE
Safe box at bed-end
□ ETSB-F
□ ETSB-FR
□ ETSB-R
Engine tunnel storage box
Engine tunnel storage box & rear cab wall
Rear cab wall storage
□ TABLE
Table
□ REF-ICPK
□
□
□
□
SWL-2FW
SWL-2RW
SWL-4W
SWL-PK
2 white rear chassis-mounted working lamps
Wiring prep for chassis-mounted reverse/working lamps-3
position switch
2 white side working lamps (forward facing)
2 white side working lamps (rearward facing)
4 white side working lamps
Wiring prep for chassis-mounted working lamps-2 position
switch
□ WL-CHPK
Chassis mounted working lamp prep kit
□
□
□
□
2 x H3/70W work lamps with white lens.
Prep kit for high-mounted work lamps.
Prep kit for low-mounted work lamps.
Prep kit for low- and high-mounted work lamps.
WLC-H2W
WLC-PKH
WLC-PKL
WLC-PKLH
■ ECBB-HIG
Body builder module
Refrigerator prep kit (on engine tunnel)
□ BBCHAS1
□ BBCHAS3
Body builder chassis electrical interface, 1 x 7 pin connector
Body builder chassis electrical interface, 3 x 7 pin connectors
□ BOTH-D
Bottle holder in driving area
□ BEPR-T2
Body Builder electrical prep. for tipper with remote control
■ INLI-BAS
Interior night lights
□ HBA-SB
Holes for body attachments
■ Standard Equipment
□ Optional Equipment
For more detailed information about cab and powertrain equipment, please refer to separate specification sheets.
For all possible options and combinations of options please consult your Volvo sales contact who can create a specification to match your requirements using the
Volvo Sales Support system (VSS).
The factory reserves the right to modify design and change equipment without previous notification.
The specification can vary from country to country.
3 (4)
Ref: FM 64 R3HBX16 NZL 2014-09-18 ENGAU
New FMx13 HBX 6x4 Rigid B-Ride - Construction FM 64 R3HBX
■ AESW2
□ AESW2PK
2 flexible switches (AUX 1 and AUX 2).
2 flexible switches (AUX 1 & AUX 2) + additional 4 flexible
switches
□ AUXSW-4
4 extra bi-stable switches wired to BBM
Delivery services
■ TGW-3GWL
Telematics gateway with 3G & WLAN
□ TESP-T
TESP (Dynafleet) with transport info
□ FMS-PK
Fleet management system gateway
■ Standard Equipment
□ Optional Equipment
For more detailed information about cab and powertrain equipment, please refer to separate specification sheets.
For all possible options and combinations of options please consult your Volvo sales contact who can create a specification to match your requirements using the
Volvo Sales Support system (VSS).
The factory reserves the right to modify design and change equipment without previous notification.
The specification can vary from country to country.
4 (4)
Ref: FM 64 R3HBX16 NZL 2014-09-18 ENGAU
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement