CLUX HDMI 1.3 1x4S, 1x2S, 1x8S, 1x10S, 2x10S, 2x10T HDMI splitter, HDMI 1.3 1x1S HDMI repeater, HDMI 1.3 2x1SY, 3x1S, 3x1SY, 4x1SY, 4x1AT, 4x2S HDMI switcher Operation Manual

Below you will find brief information for HDMI splitter HDMI 1.3 1x4S, HDMI splitter HDMI 1.3 1x2S, HDMI splitter HDMI 1.3 1x10S. This device is a HDMI 1.3 splitter that can split one HDMI source to four HDMI displays simultaneously. It supports Deep Color video up to 12bit and transmits digital audio, such as Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio. It also supports DVI source and DVI display by using an HDMI to/from DVI adaptor cable.

PDF Download
Document
HDMI splitter HDMI 1.3 1x4S - Operation Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • HDMI 1.3 compliant
  • Supports Deep Color up to 12bit
  • Supports Dolby TrueHD and DTS-HD Master Audio
  • Supports DVI source and DVI display
  • One HDMI source to four HDMI displays
  • Signal amplification and equalization
  • Buffered outputs can run up to 30 meters
  • Can be cascaded

Frequently asked questions

The maximum distance that the HDMI cable can be is 30 meters for both the input and output source, assuming a 1080p resolution.

The EDID source can be selected from either the TV or the splitter. To select the EDID source from the TV, leave the EDID control jumper in the TV selection position. To use the build-in EDID, switch the EDID control jumper to the STD position.

The device supports LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio transmission with a sample rate of 32-192kHz Fs.
Preparing document for printing…
0%