Extron CD 900 Specification

Specifications — CD 900 Quad-Standard Decoder

Video

Gain ............................................... Variable by adjusting contrast

Bandwidth .................................... 6 MHz (-3dB) (luminance)

Differential phase error .............. 1.5º, 0 to 10 MHz

Differential gain error ................. 1.5%, 0 to 10 MHz

Video input

Number/signal type ................... 1 S-video (Y/C), 1 composite video (switch- or software-selectable)

Connectors .................................... 1 female 4-pin mini DIN ........ S-video

1 female BNC ........................... composite video

Minimum/maximum levels ...... Analog ....... 0.3V to 1.5V p-p with no offset at unity gain

Impedance .................................... 75 ohms

Horizontal frequency .................. 15.6 kHz to 17.75 kHz

Vertical frequency ....................... 50 Hz to 60 Hz

Video output

Number/signal type ................... 1 RGBHV, RGBS, RGsB, or component video (Y, P

B

, P

R

) (switch-selectable; must select SOG for component video)

Connectors .................................... 5 female BNC

Minimum/maximum levels ...... Analog ....... 0.4V to 2.0V p-p

Impedance .................................... 75 ohms

DC offset ....................................... ±0.1V maximum with input at 0 offset

Sync

Output type .................................. RGBHV, RGBS, RGsB (toggle switch or software selectable)

Standards ...................................... NTSC 3.58, NTSC 4.43, PAL, SECAM

Input level ..................................... 0.3V p-p

Output level.................................. RGBHV, RGBS ........................ TTL (5V p-p)

RGsB or component ............... 0.3V p-p

Input impedance .......................... 75 ohms

Output impedance ...................... 75 ohms

Polarity .......................................... RGBHV .................... positive or negative (switch-selectable)

S-video .................... negative

Composite video ...... negative

Control/remote — decoder

Serial control port ........................ RS-232, 9-pin female D connector

Baud rate and protocol ............... 9600, 8-bit, 1 stop bit, no parity

Serial control pin configurations .... 2 = TX, 3 = RX, 5 = GND

Contact closure ............................ 9-pin female D connector

Program control ........................... Extron’s control program for Windows®

Extron’s Simple Instruction Set™ – SIS™

General

Power ............................................. 100VAC to 240VAC, 50/60 Hz, 7.5 watts, internal, auto-switchable

Temperature/humidity .............. Storage -40° to +158°F (-40° to +70°C) / 10% to 90%, non-condensing

Operating +32° to +122°F (0° to +50°C) / 10% to 90%, non-condensing

Rack mount ................................... Yes, with optional rack shelf, part #60-190-01

Enclosure type .............................. Metal

Enclosure dimensions ................. 1.75" H x 8.75" W x 9.4" D (1U high, half rack width)

4.4 cm H x 22.2 cm W x 23.9 cm D

(Depth excludes connectors and knobs.)

Product weight............................. 3.0 lbs (1.4 kg)

Shipping weight ........................... 6 lbs (2.7 kg)

1-2 CD 900 • Specifications

Vibration ....................................... ISTA/NSTA 1A in carton (International Safe Transit Association)

Listings .......................................... UL, CUL

Compliances ................................. CE, FCC Class A

Warranty ....................................... 3 years parts and labor

Specifications are subject to change without notice.

7.31-032202-D1-112012

CD 900 • Specifications 1-3