ADIC DATAMGR 3.5 Specifications

ADIC DATAMGR 3.5 Specifications
DISTRIBUTED SOLAR POWER HARVESTING SYSTEMS
Short Form Catalogue 2013 I 2014
I
25
• Inverter •
• Inverter •
r • Inv
er
t
er
erte
nv
Years
r
te
Warranty
erter • Inver
nv
I
www.acdc.co.za
SOLAR DC POWER KITS
Economy Solar home systems are pre-packed kits providing simple power and lighting solutions for applications such as low cost housing and
remote rural installations.
Solar Braai Light
Solar Torch
Solar Camp Light
Solar Desk Lamp
BSS-00207
BSS-00213
High Quality
PV
1000 cycles
Lithium
Battery
Super Bright
LED
BSL-P0807W
Code
BSS-00107
Battery Type
Lithium
Lithium
Lithium
Lithium
Battery Life
5hrs full charge
7hrs full charge
24/ 6hrs full charge
5/ 11/ 66hrs full charge
0.4W / 35lm
0.6W / 50lm
1.2/ 0.6W / 110 / 20lm
0.7W / 45lm
0.5W Polycrystalline
1W Polycrystalline
1W Polycrystalline
1W Polycrystalline
PV Panel Holder, Pull cord
Lamp Holder
Carry Holder, cell accessories
Cell accessories
125 x 155 x 80mm
165 x 155 x 170mm
145 x 110 x 185mm
160 x 92 x 145mm
Solar Junior Light
Solar Lantern
Solar Junior Light 2
Solar Home Light
Spare Lamp- BSS-LAMP
Spare Lamp- BSS-LAMP
BSS-00314LH
BSS-00303-2
BSS-00311S
BSS-00504S
Battery Type
Lithium
Lead Acid
Lithium
Lithium
Battery Life
7hrs full charge
10hrs full charge
18/ 9hrs full charge
72/ 18hrs full charge
1.5W / 120lm
1.2W / 110lm
0.6W / 50lm
0.5W / 50lm
2.5W Polycrystalline
2.5W Polycrystalline
2.5W Polycrystalline
5W Polycrystalline
Accessories
Cell Accessories
Carry Holder
Cell Accessories
Cell Accessories
Packing Size
430 x 160 x 145mm
205 x 170 x 335mm
270 x 160 x 145mm
315 x 270 x 200mm
Solar Home Light 2
Solar Home Light 3
Solar Complete Home Kit
Solar Complete Home Kit
Spare Lamp- SLL-L1515
Spare Lamp- SLL-L1515
BSS-00504LH
BSS-01004LH
JY-30
JY-60
Battery Type
Lithium
Lithium
Lead Acid
Lead Acid
Battery Life
8/ 4hrs full charge
18/ 9hrs full charge
8hrs full charge
8hrs full charge
1.5W / 120lm
1.5W / 120lm
3W / 290lm
5W / 360lm
60W Polycrystalline
Lamp Power/ Lumen
PV Panel
Accessories
Packing Size
High Quality
PV
Rechargeable
battery
Super Bright
LED
Code
Lamp Power/ Lumen
PV Panel
High Quality
PV
1000 cycles
Lithium
Battery
Super Bright
LED
Code
Lamp Power/ Lumen
5W Polycrystalline
10W Polycrystalline
30W Polycrystalline
Accessories
Cell Accessories
Cell Accessories
DC fan, Cell accessories
15" TV, DC Fan, cell accessories
Packing Size
450 x 160 x 210mm
450 x 240 x 320mm
Mixed package
Mixed package
PV Panel
2
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
SOL
SOLAR DC POWER KITS
Specifically designed to provide simple lighting and power solutions to remote areas, these kits can be easily adapted for use in applications such as low cost housing,
camping etc.
Ecoboxx Qube 50
Ecoboxx Qube 90
BARBER KIT
ECOBOXX 50
ECOBOXX 90
Battery Type
AGM Lithium
AGM Lithium
AGM Lithium
AGM Lithium
Battery Life
Up to 16hrs full charge
Up to 16hrs full charge
Up to 30hrs full charge
Up to 52hrs full charge
Solar Barber Kit
Ecoboxx Qube 160
High quality
PV
Rechargeable
battery
Super bright
LED
c/w 100 inverter
Code
Lamp Power/ Lumen
ECOBOXX 160
2x2W/ 160lm
2x3W/ 324lm
4x3W/ 324lm
2x3W/ 324lm
2x10W Polycrystalline
5W Polycrystalline
10W Polycrystalline
2x10W Polycrystalline
USB to charge Phone
USB to charge Phone
USB to charge phone
403 x 292 x 355mm
520 x 495 x 393mm
500 x 415 x 373mm
604 x 415 x 373mm
Solar Travel Light
Portable 4 Lamp Home Kit
Portable 6 Lamp Home Kit
Solar Basic Light
BX-H09
MRD-426
MRD-308
DE-303
Battery Type
Lead Acid
Lithuim
Lead Acid
Ni-Mh
Battery Life
80/4hrs full charge
17hrs full charge
10hrs full charge
9hrs full charge
1W / 380lm
3W / 270lm
3W / 270lm
1W / 120lm
1.7W Polycrystalline
18W Monocrystalline
40W Monocrystalline
5W Polycrystalline
Accessories
Cell accessories, AC Adapter
USB, Cell charger
USB, Cell accessories
3m cable
Packing Size
165 x 175 x 180mm
Mixed package
Mixed package
430 x 170 x 150mm
PV Panel
Accessories
10 in 1 USB phone charger,
hair clipper & USB Fan
Packing Size
High quality
PV
Rechargeable
battery
Super bright
LED
Code
Lamp Power/ Lumen
PV Panel
Solar Camping Bag
Solar Carry Bag
Solar Cell Phone Charger
High quality
PV
Rechargeable
battery
Super bright
LED
Code
BB-01
CB-03
ES-130
Battery Type
Li-Ion
Li-Ion
Lithium, 3000mAh
Battery Life
4hrs full charge
4hrs full charge
Dependant on device
-
-
-
1.2W Amorphous
1.5 Amorphous
0.7W Polycrystalline
AC/DC Charger 5V/800mA
AC/DC Charger 5V/800mA
iPhone/ iPod, Blackberry, Samsung
Phone connectors 4pcs
Phone connectors 4pcs
Lamp Power/ Lumen
PV Panel
Accessories
SOL
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
3
SOLAR LIGHTING KITS
The outdoor lighting has long been associated with solar technology. ACDC provides another new range of Solar lighting. These products include Solar Panels and
batteries.
Security Flood Light
Solar Night Light
Solar Detector Light
Solar Spot Light
Code
BSSJ10
BSSJ23
BSSJ03
BSSJ09
Battery Type
Lead Acid
Lithium
Battery Life
8hrs full charge
24hrs full charge
Lithium
24hrs full charge
Lead acid
8hrs full charge
10W / 550lm
1W / 112lm
3.5W / 378lm
2x2 3W / 500lm
Internal
battery
rechargeable
Lead Acid
Super bright
LED
Lamp Power/ Lumen
18W Polycrystalline
0.4W Polycrystalline
1.8W Polycrystalline
10W Polycrystalline
Accessories
Mounting kit
Infra-Red Motion Detector
Infra-Red Motion Detector
Mounting kit
Packing Size
280 x 225 x 90mm
120 x 80 x 100mm
180 x 105 x 60mm
300 x 145 x 170mm
PV Panel
High Power Solar Light Solar Security Light
Solar Flood Light
Solar Courtyard Light
Solar Guard Light
BSSJ12
BSS7CLPL
BSSJ22
Lead Acid
High Quality
PV
Rechargeable
Lead Acid
battery
Super bright
LED
BSSDM02
BX-GY-02
Battery Type
Lead Acid
Ni-MH
Battery Life
24hrs full charge
18W / 1485lm
Code
Lamp Power/ Lumen
PV Panel
Specifictions
24hrs full charge
Lead Acid
8hrs full charge
13hrs full charge
Lead acid
6hrs full charge
3W / 310lm
1.8W / 196lm
43W / 460lm
3.5W / 378lm
12W Polycrystalline
1.8W Polycrystalline
23W Polycrystalline
10W Polycrystalline
10W Polycrystalline
PIR,
PIR, 10m detection + timer
PV Panel Holder
Day Night Sensor
Mounting kit
Built-In Day Night Sensor
Mounting kit included
Bulk System
DC APPLIANCES
DC TV
DC Ceiling Fan
DC Fan
DC Freezer
JY-60TV
SLE-F2001HD
SF-D6609
SLA-0145
Rated Power
Voltage
12VDC/ 230VAC
20W
16W
45W
12VDC
12VDC
12/ 24VDC
Specifications
15" Colour LCD TV
Metal construction
9" inch, aluminium, chrome
45lt capacity, temperature
Antenna not included
3 blades, 1 speed
3 blades, 2 speed
-10°C to 18°C
450 x 380 x 125mm
210 x 210 x 180mm
300 x 120 x 290mm
570 x 745 x 545mm
Code
Packing Size
4
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
SOL
SOL
SOLAR BATTERY CHARGERS
Code
Max Power
Voltage Pmax (Vmp)
Current Pmax (Imp)
Open Voltage (Voc)
Short circuit current
Package size
SLP10F-12
SLP20F-12
SLP80F-12
SLP120F-12
10W
17.0V
0.58A
21.6V
0.68A
302 x 357 x 30mm
20W
17.2V
0.87A
21.6V
0.96A
576 x 357 x 30mm
80W
17.2V
4.56A
22.84V
5.17A
720 x 150 x 635mm
120W
17.2V
6.98A
22.89V
7.72A
1070 x 610 x 140mm
FOLDABLE / FLEXIBLE SOLAR PANELS
Foldable
Semi-Rigid
3m extension
cable
Cellphone
accessories
Heavy-duty
material
Code
Max Power
Voltage Pmax (Vmp)
Current Pmax (Imp)
Open Voltage (Voc)
Short circuit current
Package size
SHB-10W
SHB-20W
SHB-50W
SLP10F-12A
10W
17.42V
0.57A
21.2V
0.62A
220 x 320 x 40mm
20W
17.46V
1.18A
21.6V
1.29A
220 x 320 x 40mm
50W
17.7V
2.87A
21.8V
3.1A
360 x 450 x 60mm
10W
17.0V
0.61A
21.8V
0.69A
350 x 30 x 358mm
Flexible Semi-Rigid
Code
Max Power
Voltage Pmax (Vmp)
Current Pmax (Imp)
Open Voltage (Voc)
Short circuit current
Package size
SLP20F-12A
SLP30F-12A
SLP40F-12A
SLP50F-12A
20W
17.4V
1.25A
21.8V
1.41A
350 x 30 x 358mm
30W
17.4V
1.67A
21.9V
1.78A
375 x 30 x 635mm
40W
17.6V
2.5A
22.6V
2.89A
375 x 30 x 795mm
50W
17.7V
2.95A
22.8V
3.5A
475 x 40 x 955mm
Flexible
Features:
• Portable
• Flexible construction
• Ultra Light-weight
• Laminated on Polymer
• Higher Energy yield per Wp
Code
Max Power
Voltage Pmax (Vmp)
Current Pmax (Imp)
Open Voltage (Voc)
Short circuit current
Package size
FX320
FX680
FX1440
32W
16.5V
1.94A
23.8V
2.4A
1380 x 400mm
68W
16.5V
4.10A
23.1V
5.10A
2849 x 394mm
144W
33.0V
4.56A
46.2V
5.30A
5486 x 394mm
SOL
Applications:
• Boating
• Camping
• Water pumping
• Rural Electrification
Standards:
• IEC 61646
• IEC 61730
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
5
SOLAR PV MODULES
ACDC offers a range of Polycrstalline panels designed for both On‐Grid and Off‐Grid applicatons.
All panels are constructed using the higest quality components and are CE certfied according to the IEC61215:1995 standard.
All ACDC panels are covered by our 25 year warranty.
(Poly) Multicrystalline PV Module (Lower cost)
Code
Maximum
Power (Pmax)
Voltage @
Pmax (Vmp)
Current @
Pmax (Imp)
Open-Circuit
Voltage (Voc)
Short-Circuit
Current (Isc)
Dimensions
LxWxH
SLP005-12
SLP010-12
SLP020-12
SLP030-12
SLP040-12
SLP050-12
SLP060-12
SLP080-12
SLP090-12
SLP100-12
SLP120-12
SLP130-12
SLP140-12
SLP135-24
SLP170-24
SLP180-24
SLP210-24
SLP240-24
SLP260-24
SLP270-24
SLP290-24
5W
10W
20W
30W
40W
50W
60W
80W
90W
100W
120W
130W
140W
135W
170W
180W
210W
240W
260W
270W
290W
17.0V
17.0V
17.2V
17.4V
17.4V
17.4V
17.4V
17.4V
18.0V
17.4V
17.4V
18.3V
18.3V
36.2V
34.8V
34.8V
29.0V
30.1V
34.9V
34.9V
36.5V
0.29A
0.58A
1.16A
1.72A
2.30A
2.87A
3.74A
4.58A
5.00A
5.74A
7.75A
7.10A
7.66A
3.73A
4.88A
5.17A
7.24A
8.00A
7.44A
7.73A
7.94A
21.6V
21.6V
21.6V
21.5V
21.5V
21.5V
21.5V
21.5V
21.7V
21.5V
21.5V
22.0V
22.0V
43.8V
43.4V
43.4V
36.3V
37.3V
43.7V
43.7V
44.0V
0.34A
0.68A
1.31A
1.89A
2.53A
3.18A
4.11A
5.03A
5.40A
6.36A
8.52A
7.80A
8.23A
8.06A
5.36A
5.68A
7.65A
8.64A
8.18A
8.50A
8.59A
270 x 222 x 30mm
357 x 302 x 30mm
550 x 359 x 30mm
680 x 426 x 30mm
650 x 665 x 30mm
650 x 665 x 30mm
800 x 675 x 35mm
1005 x 675 x 35mm
1195 x 541 x 35mm
1240 x 675 x 35mm
1490 x 675 x 35mm
1370 x 675 x 35mm
1482 x 676 x 35mm
1020 x 992 x 35mm
1300 x 992 x 50mm
1482 x 992 x 50mm
1636 x 992 x 35mm
1640 x 992 x 50mm
1956 x 992 x 50mm
1956 x 992 x 50mm
1956 x 992 x 50mm
17.4V
18.8V
34.8V
37.7V
5.17A
5.3A
5.17A
6.85A
21.5V
22.5V
43.8V
45.0V
4.48A
5.83A
5.55A
7.25A
1195 x 541 x 35mm
1195 x 541 x 35mm
1580 x 808 x 40mm
1580 x 808 x 40mm
Monocrystalline PV Modules
SLP090S-12
SLP100S-12
SLP180S-24
SLP200S-24
90W
100W
180W
200W
Mechanical Characteristics
Solar Cells: Multicrystalline or Monocrystalline Solar cells
Construction: Front High-transmission 3.2mm tempered glass; Encapsulate: EVA; Back: TPT
Frame: Clear anodized aluminium alloy (silver colour)
Module Warranty:
• 25 year limited warranty of 80% power output;
• 10 year limited warranty of 90% power output;
• 5 year limited warranty of materials and workmanship.
6
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
SOL
SOLAR CHARGE CONTROLLERS
Electronically regulated charging: Boost and float charge, Deap discharge protection PWM regulation. Fully electronically protected: Panel surge, wrong polarity
at the panel or battery, overload and short circuit at load. CML Range: Automatic 12/ 24 Volt detection, boost, equalize and float charging
4 LED indications:
charge status,
SOC, LVD,
Overload/ short
circuit
c/w Built-in Day/ Night Sensor
CA-08
CML-05
Max module current
8A
5A
8A
10A
20A
Max load current
8A
5A
8A
10A
20A
Voltage
12V
12/ 24V
12/ 24V
12/ 24V
12/ 24V
2 x LED, 1 x Duo-LED
2 x LED, 1 x Duo-LED
2 x LED, 1 x Duo-LED
2 x LED, 1 x Duo-LED
2 x LED, 1 x Duo-LED
<4mA
<4mA
<4mA
<4mA
<4mA
80 x 100 x 32mm
80 x 100 x 32mm
80 x 100 x 32mm
80 x 100 x 32mm
80 x 100 x 32mm
Code
Display
Self consumption
Dimensions
CML-08DS
CML-10
CML-20
CML-20
ECO PWM CHARGE CONTROLLER
The SLX range of solar controllers are optimally suited for inverter systems. The charging can be individually set up by using four buttons behind the front
casing. Multi-stage charging technology + PWM control. Integrated self test function.
LCD indications:
Battery voltage
PV Wattage
Charge current
Code
SLX-10
SLX-20
SLX-30
SLX-40
SLX-4*
Max module current
10A
20A
30A
40A
Max load current
10A
20A
30A
10A
12/ 24V
12/ 24V
12/ 24V
12/ 24V
*10A/ 40A (Add to code)
10A/ 40A
48V
LCD
LCD
LCD
LCD
LCD
12.5mA
187 x 95 x 44mm
12.5mA
187 x 95 x 44mm
12.5mA
187 x 95 x 44mm
12.5mA
187 x 128 x 49mm
25mA
187 x 128 x 49mm
Voltage
Display
Self consumption
Dimensions
SOLAR CHARGE CONTROLLER
The SunStar is a highly reliable solar battery charger and its most critical feature is to maximize the harvest energy from the PV array into the battery by using
either advanced Maximum Power Point Tracking (MPPT) technology or Pulse Width Modulation (PWM) control.
LCD indications:
Battery voltage
PV Wattage
Charge current
Code
Max module current
Max load current
SS-30C
SS-45C
SS-50C
SS-60C
SS-80C
30A
45A
50A
60A
80A
30A
45A
50A
60A
80A
12/ 24/ 48V
12/ 24/ 48V
12/ 24/ 36/ 48V
12/ 24/ 48V
12/ 24/ 36/ 48V
Control Method
PWM
PWM
MPPT
PWM
MPPT
Display
LED
LCD
LCD
LCD
LCD
Voltage
Max Voc
Dimensions
140VDC
140VDC
240VDC
140VDC
240VDC
65 x 236 x 35mm
266 x 127 x 75mm
415 x 225 x 147mm
266 x 127 x 75mm
498 x 393 x 147mm
SOL
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
7
BATTERY TESTER
BATTERIES
ACDC Batteries use special alloyed calcium-lead which leads to extermely low
levels of "Electrolyte decrease". Therefore there is no need to top up with distilled
water if the charging system remains error free.
• Complete protection against reduction of sulfuric acid
• Consistent starting performance
M Solar Cells
Sealed Lead Acid
Life span 3 to
5 years in
standby service
Deep cycle Calcium Lead Acid
Code
Type
SY612
SY632
SY640
SY640-S
SY1245
SY1270
SY12012
SY12024
SY12035
SY12045
SY12065
SY12080
SY120102
SY120200
SY6600
SY6750
SY6900
Lead Acid
Lead Acid
Lead Acid
Lead Acid
Lead Acid
Lead Acid
Lead Acid
Lead Acid
Calcium Lead
Calcium Lead
Calcium Lead
Calcium Lead
Calcium Lead
Calcium Lead
Gel Crystal
Gel Crystal
Gel Crystal
Nominal Nominal
Voltage Capacity
Terminal
type
Size (mm)
6V
6V
6V
6V
12V
12V
12V
12V
12V
12V
12V
12V
12V
12V
6V
6V
6V
Lug
Lug
Lug
Lug
Lug
Lug
Lug
Lug
SAE Post
SAE Post
SAE Post
SAE Post
Nut
SAE Post
SAE Post
SAE Post
SAE Post
96 x 72 x 84
125 x 33 x 72
70 x 47 x 107
65 x 33 x 75
90 x 70 x 107
150 x 65 x 102
151 x 98 x 102
165 126 x 173
230 x 200 x 135
230 x 240 x 135
230 x 265 x 190
226 x 352 x 175
240 x 335 x 175
245 x 520 x 280
445 x 585 x 198
445 x 585 x 230
445 x 585 x 262
1.2AH
3.2AH
4.0AH
4.0AH
4.5AH
7.0AH
12.0AH
24.0AH
35.0AH
45.0AH
65.0AH
80.0AH
102.0AH
200.00AH
600.00AH
750.00AH
900.00AH
Features:
• Simultaneously test voltage, resistance
and battery capacity
• Auto-calibration function to enhance
testing accuracy
• Fast testing of battery or string, results
are automatically saved
• USB connection for software updating
and data transfer to PC
• Powerful PC management software for
data storage and analysis
• Audible alarm and over voltage protection
• Easy navigation via the colour touch screen and keyboard
Code
PITE3915
Description
Portable battery tester for batteries
Suitable for cell voltages: 1.2V, 2V, 6V and 12V
Suitable for 5Ah - 6000Ah batteries
Tests cell resistance and voltage to help eliminate weak
batteries and ensure optimal performance of the system
3000 cell test results stored in memory
TTechnical Specifications
Resistance range
0.00mΩ ~ 100mΩ
Test resolution/ accuracy:
Resistance
0.1mΩ/ ±1.0% of rdg
Voltage
1mV/ ±0.2% of rdg
Battery
Li-ion
Battery Life
More than 8 hours
Testing Capacity
1-254 cells per string
Voltage range
0-220V
Display
320 x 240 Pixel TFT
Size
210 x 110 x 60mm
SOLAR AC HOME SYSTEM
Complete single phase solar power solution for use in a home. The kit includes all the components needed to make the switch over to solar quick and easy.
The integrated display allows the user to have all the information about the status of the system at their fingertips.
Price includes:
Batteries & PV
panels incl.
Inverter
Solar regulators
Mains isolator
DC Disconnector
LCD Display
Code
Description
Max power rating
* Solution excludes PV mounting
system and wiring.
DE-H150
DE-H250
DE-H350
HYB001-6
500W Power Pack
1000W Power Pack
3000W Power Pack
6000W Power Pack
8000W Power Pack
10000W Power Pack
500W
1000W
3000W
6000W
8000W
10000W
Max current
2.5A
4.5A
12.5A
25A
32A
42A
Battery
80AH
4 x 100AH
8 x 100AH
20 x 100AH
24 x 100AH
36 x 100AH
Solar Panels
80W
2 x 220W
4 x 220W
12 x 270W
14 x 270W
20 x 220W
Output voltage
Input voltage
Standby Time
8
HYB001-8
DE-H10K
SAP-20007AW-PACK
220-240± 1%
12VDC
12VDC
12VDC
48VDC
48VDC
48VDC
7hrs
8hrs
10hrs
10hrs
10hrs
6hrs
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
BC1
MOBILE POWER BACKUP SYSTEMS
Mobile UPS - Modified sine wave output 230VAC single phase, to be used for home or office during power cuts. All in one inverter/ charger/ auto change over/
battery pack and trolley
Solar System
Input voltage
12VDC/ 230VAC
Overload
protection
Over/ under
voltage protection
EPS-1000B
EPS-1500B
EPS-2000B
EPS-2000D
PP-1500
PP-2000
Constant watts
1000W
1500W
2000W
2000W
1500W
2000W
3000W
Peak watts
2000W
3000W
4000W
4000W
3000W
4000W
Voltage
12VDC
12VDC
12VDC
13.5 - 20VDC
12VDC
12VDC
6000W
12VDC
Back-up time full load
1.2hrs
0.8hrs
0.6hrs
0.6hrs
1.6hrs
1.2hrs
0.8hrs
Back-up time +102Ah
2.4hrs
1.6hrs
1.2hrs
1.2hrs
2.4hrs
1.8hrs
1.2hrs
6hrs
4hrs
3hrs
3hrs
4.8hrs
3.6hrs
2.4hrs
(4 batteries)
(8 batteries)
(16 batteries)
BAT-A4
BAT-A8
BAT-A16
420 x 450 x 670
760 x 450 x 770
780 x 455 x 1360
Code
Back-up time +4x102Ah
Accessories
Battery Boxes
Box Size
PP-3000
Specifications: • Modified sine wave 210-230VAC
• Robust industrial wheels
• EPS-2000D 180W PV Panel, 20A Controller
DC TO AC INVERTERS
Features:
• Low voltage LED
• Overload LED
• Output Volt 230VAC/ +/ -8%
• DC to AC isolation
• Short circuit protection
Applications:
Radio's, TV, Cellphones
Energy saving lamps
Power tools
* Calculations for
power
Power tool W x 3 =
100W x 3 = 300W
PM-A-150-SA
Code
Maximum power
Peak power
Input volts
Dimensions
PM-A-300-SA
150W
250W
10-40VDC
150 x 190 x 170mm
PM-A-600-SA
300W
600W
500W
1000W
10-14VDC
10-14VDC
420 x 215 x 140mm
PM-A-1000-SA
1000W
1500W
10-14VDC
340 x 335 x 250mm
Do Not Use for Iron Core
Ballast
MODIFIED SINE WAVE INVERTERS
Modified
Sine
Code PM-R15A
*Remote control Kit
Code 12V
Code
Code
24V
12V
PM-A-0150AH12 PM-A-0300AH12 PM-A-0600AH12 PM-A-1000AH12 PM-A-1200AH12 PM-A-1500AH12
-
-
PM-A-0600AH24 PM-A-1000AH-24 PM-A-1200AH2
Max continu150W
300W
ous power
Peak power
300W
600W
Output Amps
0.6A
1.25A
Dimensions 115 x 101 x 63mm 189 x 101 x 63mm
Code 12V with charger
Code 24V with charger
Specifications: • AC Output voltage
• Regulations
• Frequency
• Low voltage shut down 12/ 24
600W
1000W
1200W
2.5A
245 x 176 x 85mm
2000W
4.16A
360 x 236 x 83mm
230VAC
± 0.5%
50Hz ±1%
9.8V/ 19.12V
PM-A-1000CA12
PM-A-1000CA24
1200W
PM-A-2500AH12
PM-A-1500AH2
PM-A-2500AH24
1500W
2500W
1400W
2000W
5A
7A
330 x 275 x 110mm 480 x 275 x 110mm
PM-A-1200CA12
PM-A-1500CA12
PM-A-1200CA12
PM-A-1500CA24
4200W
10.4A
510 x 275 x 110mm
PM-A-2500CA12
PM-A-2500CA24
Features: • Overload protection
• DC Input/ AC Output short circuit protection
• All inverters supplied with cables
• Cooling Fan
BC1
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
9
PURE SINE WAVE INVERTERS
Pure Sine
BC1
Code 12V
CZ-150S-12 CZ-300S-12 CZ-600S-12* CZ-1000S-12* CZ-2000S-12* CZ-3000S-12* CZ-4000S-12* CZ-5000S-12* CZ-6000S-12*
Code 24V
-
-
Code 48V
-
-
-
Max continuous power
150W
300W
600W
1000W
2000W
3000W
4000W
5000W
6000W
Peak power
300W
600W
1200W
2000W
4000W
6000W
8000W
10000W
12000W
Output Amps
0.6A
1.5A
2.8A
4.3A
8.7A
13A
17A
21A
26A
Dimensions
CZ-600S-24* CZ-1000S-24* CZ-2000S-24* CZ-3000S-24* CZ-4000S-24 CZ-5000S-24* CZ-6000S-24*
CZ-1000S-48* CZ-2000S-48* CZ-3000S-48* CZ-4000S-48* CZ-5000S-48* CZ-6000S-48*
180x105x60mm 260x165x85mm 260x165x85mm 328x165x85mm 416x165x85mm 497x170x150mm 485x210x127mm 565x210x145mm 565x210x145mm
* Add (C) for Charger Unit
• High Quality Components are used to improve effeciency.
• Automated manufacturing processes ensure product quality.
• Advanced PCB design results in reduced electro magnetic interference and improved performance.
British Plug for Inverters
Code
A304
HOME SOLAR INVERTERS
This home solar inverter system incorporates features such as overload protection, short circuit protection and a DC cold start function.
The inverter is designed for 24 hour operation.
Code
Max.con power
HI-1K
HI-2K
HI-3K
HI-5K
HI-6K
HI-8K
1.2kVA/ 800W
2.4kVA/ 1600W
3.6kVA/ 2400W
5kVA/ 4000W
6kVA/ 6000W
8kVA/ 8000W
48VDC
48VDC
120-270VAC
Input voltage range
Input DC range
12VDC
24VDC
Output voltage
Output current
3.5A
24VDC
7A
10A
17A
26A
35A
>60A
>60A
>60A
415 x 600 x 260
415 x 600 x 260
415 x 600 x 260
>40A
>50A
>50A
Dimensions
298 x 400 x 150
298 x 450 x 190
298 x 450 x 190
Specifications:
• Pre-settable parameters
• Multi stage charger
Battery charger
NB: Requires external
solar controller
24VDC
220/ 230/ 240VAC re-settable via LCD Display
• High effeciency design
• Removable LCD Display
• Self-diagnostic function
• Input/ output protection
DC TO AC INVERTER/ CHARGER/ POWER MANAGEMENT SYSTEM
• Combi-functional, with intelligent shore and generator
power management
• Uninterrupted AC power (UPS function)
• Virtually unlimited power thanks to parallel operation
• Three-phase capability
• Power Control: Dealing with limited generator, shore side or grid
power to avoid sudden loads on generator causing voltage spikes
• Power Support: Boosting the capacity of shore or
generator power, an innovative feature of the CombiPlus
• Four-stage adaptive charger and dual battery charging
• LCD display for parameter setting and error messages
• Programmable auxillary relay (x3)
• Programmable input current limit for power share
• Communication with max. 10sets of solar chargers
(SunStar series)
• Four preset control mode applications with AC grid, AC charging and
solar charging
• Optional remote panel with LCD display for easy operation at a distance
CombiPlus - Pure Sine Wave Inverter/ Charger/ Power Management System - Ideal for home, office, caravan etc.
Code
DC Voltage
(IN)
AC Voltage
(IN/OUT)
Rated
Power
Max
Power
Size (mm)
Battery
Voltage
Charging
Current
Battery
Bank Size
CP-1500-122
CP-3000-122
12VDC
185-240VAC
1500W
3000W
362 x 258 x 370
12VDC
70A
200-700Ah
12VDC
185-240VAC
3000W
6000W
424 x 258 x 370
12VDC
140A
400-1200Ah
The "CombiPlus" is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive (4-stage) charge technology and a high-speed AC Auto
Transfer Switch (ATS) in a single compact enclosure. The "CombiPlus" can also support the Mains Power with battery power when the load increases or the Mains
fails. If the load falls, the excess Mains Power is diverted to charge the battery. The unit can also control up to 10 SS-45C solar charge controllers to enable solar
battery charging. (see page 7)
10
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
SOL
AC HOME HYBRID SYSTEM
The Solar hybrid system is a PLC controlled solar/ wind modular solution for home and office. Our new modular system can be increased from 3kVA to 15kVA.
The base unit consists of a steel 21U 19inch cabinet, touch screen monitor, 100A solar controller and an off grid inverter (3kVA).
Pure Sine
IP20
Linear Load
Effeciency
83 to 87%
Touch Screen Monitor
100A Solar Controller
Batteries, PV Panels and PV mounting system to be ordered seperately
Stackable Grid Inverter
*3kVA is a base unit and can be increased with selected modules to 15kVA
Base Unit
Complete System
Add on inverter modules
Code
*SWKH001-3KVA
SPO1000-B
SPO3000-B
SPO6000-B
SPO9000-B
SPO12000-B
Max power
2100W
220/ 230/ 240 +/-1%
700W
2100W
4200W
220/ 230/ 240 +/-1%
6300W
8400W
Max current
13.6A
4.5A
13,6
37,3
40,9
54,5
DC Voltage
48 (40-57VDC)
Weight Kgs
88kgs
5
13,5
32
41
49
Dimension
21U x 600D
440 x 286 x 1U
435 x 358 x 2U
435 x 380 x 445
435 x 380 x 445
435 x 380 x 445
Output voltage
Accessories
Code
SPC048200
SWKH-41U
48 (40-57VDC)
Description
Solar Charge controller MPPT, 200A, 48VDC, Max PV input 9.6kW (58-70V)
41U battery cabinet + DC Bus bar, Fans and extraction, lockable doors
HOME SOLAR INVERTERS
The Solar Powabank is the latest innovation in power products: Simplified structure, reliable performance, easy operation. This Solar Power System can offer
stable and reliable electricity to those regions where are short of power or even without power.
Code
SAP-05007AW
SAP-10007AW
SAP-20007AW
500W AC Power Pack
1000W AC Power Pack
2000W AC Power Pack
PowerBank Only
Max power rating
500W
1000W
2000W
2000W
Max current
2.5A
4.5A
9A
9A
Controller Amps
20A
30A
30A
30A
Battery
55AH
100AH
200AH
200AH
Solar Panels*
50W
100W
2 x 100W
-
Description
Output voltage
205 - 230 +/-1%
Dimensions
205 - 230 +/-1%
12-14.5VDC
12-14.5VDC
Input voltage
300 x 180 x 550mm
SAP-20007AW-PACK
SAP-20007AW-PACK
460 x 240 x 550mm
560 x 290 x 480mm
560 x 290 x 480mm
Features
• Reliable, maintenance free performance
• Simple design, to meet your requirements
• LCD Display clearly shows system status at all times
• Various applications ranging from everyday to
emergency power supply
* For mounting brackets for the solar panels see page 22
SOL
• Power generation and storage for uninterrupted
use in places without electricity
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
11
SOLAR EDGE INVERTERS
This range of solar inverters is part of SolarEdge's innovative system designed to provide superior performance at a competitive price. The solar edge PV inverter
combines a sophisticated, cutting edge digital control technology and a one stage, ultra-effecient power conversion architecture to achieve superior performance - over
97% efficieny with best in class reliability. Our fixed-voltage technology ensures the inverter is always working at its optimal input voltage, regardless of the number of
modules or environmental conditions.
The best choice for SolarEdge enabled systems
• Superior effeciency (98%)
• Small, lightest in its class and easy to install
• Built-in module-level monitoring
• Communication to internet via ethernet or wireless
• IP65 - Outdoor and indoor installation
Free 12 year warranty for inverters
Three Phase
Single Phase
Must be used with Solar Edge Power Optimizers (PG13)
Single Phase Inverters
Code
Rated AC Power Output
SE2200
SE3000
SE3500
SE4000
SE5000
SE6000
SE4000-16A
RATING
2200
3000
3500
4000
5000
6000
4000
W
220/230
Vac
184-264.5
Vac
Hz
AC Output Voltage (Nominal)
AC Output Voltage Range
50/60+/-5%
AC Frequency
Max Current Output
12
16.5
19.5
22
Residual Current/ Step Detector
Utility monitoring, islanding protection,
Country confiqurable thresholds
Recommended Max DC Power
(module STC)
2400
3300
3900
27
27
16
A
300/30
mA
Yes
-
4400
5500
6600
4400
W
Transformer-less, ungrounded
Yes
-
Max Input Voltage
500
350
Vdc
Vdc
Nominal DC Input Voltage
Max Input Current PV
8.5
11.5
13.5
15.5
19.5
23
15.5
A
-
RS485, RS232, ETHERNET, Zigbee (Optional)
Support Communication Interface
Three Phase Inverters
Code
SE7K
SE8K
SE9K
SE10K
SE12.5K
SE15K
SE16K
SE17K
RATING
Rated AC Power Output (Max)
7000
8000
9000
10000
12500
15000
16000
17000
W
14,5
380/ 220: 400/ 230
184-264.5
16
20
AC Output Voltage (Nominal)
AC Output Voltage Range
Max Current Output
11.5
23
25.5
26
A
Grids supported - three phase
3/ N/ PE: 230/ 400
-
Residual current/ step detector
300/ 30
mA
Yes
-
Utility monitoring, islanding protection,
country configurable threshold
Recommended max DC power
(module STC)
7700
8800
9900
11000
13700
16500
17600
18700
W
Transformer-less, ungrounded
Yes
-
Max input voltage
950
VDC
Nominal DC input voltage
750
VDC
Max input current PV
12
Support communication interface
12
13
VAC
VAC
13,5
23
A
RS485, RS232, ETHERNET, ZIGBEE or GSM (Optional see page14)
15
16,5
-
Code*
Description
WE-1M-25
WE-1S-25
WE-3H-25
WE-3M-25
Extended warranty, single phase inverter 4 - 6kW
21
22
23
Extended Warranty, single phase inverter <4kW
Safety Standard compliance
IEC-62103 (EN50178), IEC-62109
Grid connection standards:
Extended warranty, three phase inverter 15 - 17kW
VDE 0126-1-1, VDE-AR-N-4105, AS-4777, RD-1663, IEC61000-3-11,
Extended warranty, three phase inverter 7 - 12.5kW
IEC61000-3-12, FCC part 15 class B, RoHS Yes
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
SOL
Emissions
IEC61000-6-2, IEC61000-6-3
*Extended warranty up to 25 years available
POWER OPTIMIZER
A superior approach to maximizing the throughput of photovoltaic systems
• Up to 25% more energy - module-level MPPT eliminates power loss due to module mismatch
• Superior effeciency- peak (99.5%), weighted (98.9%)
• Next gereration maintenance with module-level monitoring and smart alerts
• Automatic DC safety
• Maximum roof utilization
• Independant optimization technology (IndOPTM)
The most cost effective solution for residential, commercial and large field installations
Only for use with Solar Edge Inverters
Code
OPA250-RV
OPA300-LV
OPA400-MV
OPA400-EV
Rated Input DC Power
250
300
400
400
W
Absolute max input voltage
47
55
75
130
VDC
5-47
5-55
5-75
15-130
VDC
10
10
12.5
7
A
MPPT Operating range
Max input current
Max Output current
Operating Output Voltage
RATING
A
15
5-60
VDC
500/ 950
VDC
Min number Optimizers
8 (1Ph system)/ 16 (3Ph system)
-
Max number Optimizers
Module power dependant: Maximum 25 (1Ph system)/ 50 (3Ph system)
-
Total max string voltage 1ph/ 3ph
BRANCH-CABLE FOR POWER OPTIMIZER INPUT
Ideal solution for low power modules
• Allows to connect 2-4 modules in parallel to a single power optimizer
• Double insulated PV wire
• Max current 30A @ 1000VDC
SE-CBY-4MM
SE-CBY-3MM
Kit consists of
SE-CBY-2MM
SE-CBY-2MM
SE-CBY-3MM
SE-CBY-4MM
2- Module branch cable
3- Module branch cable
4- Module branch cable
Code
Description
• Utilize power optimizers to their full power rating
• Multi-contact MC4 connectors
20 male & 20 female units in each pack 10 male & 10 female units in each pack
10 male & 10 female units in each pack
SAFETY & MONITORING INTERFACE
Benefit from module-level monitoring and automatic safety with non-SolarEdge inverters.
•
•
•
•
•
Interface between SolarEdge power optimizers and non-SolarEdge inverters
Module safety voltage for installer and firefighter safety
Mobile and web-based module level performance monitoring
Communication via RS232, RS485 or Ethernet
IP65 for outdoor installation
The SolarEdge safety and monitoring interface collects module performance data measured by each
power optimizer, as well as inverter data*, and interfaces with the SolarEdge server to allow module-level
and system-wide monitoring. (For communication options please see page 14)
Code
DC Input
SMI-35-3C-01
Max input voltage
Total max current
Input type
1000VDC
35A
3 x MC4 Compatible
Additional Features
AC Input
Display
LCD & LED
Remote monitoring
Module Safety DC Voltage
Yes
Yes
On-site Master shutdown
Yes
Lighting Protection
Yes
Supported voltage
85 - 264VAC
Read inverter data
Yes
AC Frequency
47 - 62Hz
DC Current Sense
Yes
Max input current
300mA
SOL
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
13
CONTROL AND COMMUNICATION GATEWAY
Application Examples:
Highlights:
• Analogue inputs accomodate a variety of environmental
vironmental
sensors, including temperature, irradiance and
nd wind
• Logs inverter monitoring data
• Power reduction interface - ripple control
• Extends the distance of wired connections
• Wireless connectivity - GSM or Zigbee wireless
ess
connection options (see below)
• Interfaces to non-SolarEdge monitoring loggers
ers
• Revenue meter connection
SE1000-CCG-G
Code
Power supply
Supply voltage
Ethernet interface
Wireless connection
Power Reduction INT.
RS232 interface
3
Number of analogue inputs
0-2V or 0-10V
Input 1
Input 2
0-20mV or 0-2V
Input 3
-20mA - 20mA
Supported RS485 Devices: SolarEdge devices, export inverter data, Revenue meter,
Exported Data to Non-SolarEdge Logger
Included, 100-240VAC
9 - 140VDC (2W)
10 / 100 - BaseT
ZigBee Module (see below)
4 control pins, 5V, GND
For local connection
GSM MODEM
SolarEdge offers a GSM/ GPRS modem for wireless connectivity. The modem enables a wireless link between a master inverter and the SolarEdge
olarEdge monitoring
server using GSM cellular communication. GSM connectivity allows to effortlessly connect remote installations to the monitoring portal.
Effortless Monitoring
• Connects wirelessly to the monitoring portal
• Uses any available GSM network
• Easy installation, connects to serial port of master inverter or communication gateway
• External antenna for strong receptionn
• European compliance
Code
SE1000-GSEG-20E
Rating
RF Data rate
14,4
kbps
Frequency bands
850/ 900/ 1800/ 1900
Mhz
Transmit power
30 (@ 1800/ 1900Mhz)/ 33 (@850/ 900Mhz)
W
Data volume
0.13 (Per power optimizer)/ 0.25 (per inverter)
Antenna
external, 0dbi, SMA/M connector
MB/ Month
-
Power supply
5.5 - 32
VDC
WIRELESS COMMUNICATION PRODUCTS
SolarEdge offers Zigbee products for wireless connectivity. These enable either a wireless mesh network between multiple inverters at a site, or wireless link
between a single inverter and a remote internet gateway point.
Interconnect with ease
• Replaces either RS485 or Ethernet wiring
• External antennas for long or non-line-of-sight-links
• Interconnects inverters wirelessly
• Connects wirelessly between an inverter
and a remote internet gateway
• Zigbee unit installed within the inverter enclosure
for outdoor resilience
14
Code
Description
Functions
SE1000-ZB02-MST
SE1000-ZB02-SLV
SE1000-ZB00-DG2-X
1 Digi X-bee-Pro coordinator module, antenna (Master inverter)
Inter-inverter communication
1 Digi X-bee-Pro coordinator module, antenna (Slave inverter)
Inter-inverter communication
1 Digi Connect Port x2 gateway, 1 Digi X-bee-Pro router module, antenna
Ethernet Gateway
Performance
Description
Rating
RF Data Rate
250
kbps
Indoor/ Urban rating
15
m
Outdoor/ RF Line of Sight
250
m
Frequency Band
Antenna
2.4
2.11" helical whip, RP-SMA connector
Port (SE1000-2B00-DG2-X)
Power Supply
RJ45, 10/ 100Ethernet
Ghz
-
9-30
VDC
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
SOL
SINGLE PHASE GRID TIE INVERTERS
The Fronius IG Plus generation of inverters represents an evolution of the proven Fronius IG product family. Power categories from 2.6 to 12kW promise suitability
for every possible system size. With a maximum effeciency of 95.9%, the Fronius IG Plus range achieves one of the highest values for transformer inverters.
Fronius inverters always achieve maximum yield, even when in the partial-load range.
This is all down to the unique Fronius Master Inverter X-Change system (MIXTM).
The "master" is allocated alternately, taking into account the operating hours worked.
Fronius transformer inverters use a high-frequency (HF) transformer. The automatic
transformer switchover facility produces three efficiency peaks. The result: a constant
level of efficiency across the entire input voltage range, resulting in higher yields.
kfd
With the Fronius Datamanager, we offer a WLAN interface in the
inverter itself. The inverter is connected to the internet without
additional cabling and grants you the perfect overview of how the PV
system is operating. (Optional)
kfd
Fronius inverters are ready for the Smart Grid of tommorrow.
A series of smart functions, known as Advanced Grid Features,
are built into the devices.
kfd
Code
Input Data
DC maximum power at cos Ø=1
Max. input current (Idc max)
Max array short circuit current
FIGP25V-1
FIGP30V-1
FIGP35V-1
30V-1
35V-1
50V-1
55V-1
60V-1
3.170W
13.8A
20.7A
3.710W
16.2A
24.3A
4.260W
18.6A
27.9A
5.260W
22.9A
34.4A
6.320W
27.5A
41.3A
50V-1
55V-1
60V-1
5.000W
5.000VA
21.7A
6.000W
6.000VA
26.1A
55V-1
60V-1
230V
260V
370V
600V
230 - 500V
6
Nominal input voltage (Udc max)
Max input voltage (Udc,1)
MPP voltage range (Umpp min - Umpp max)
Number of DC inputs
Output Data
25V-1
30V-1
35V-1
AC nominal output (Pac, r)
2600W
2600VA
11.3A
3.000W
3.000VA
13.0A
3.500W
3.500VA
15.2A
25V-1
30V-1
35V-1
4.000W
4.000VA
17.4A
1-NPE 230V
180V
270V
50Hz/ 60Hz
46 - 65Hz
<3%
0.75 - 1ind / cap
Grid connection (Uac, r)
Min. output voltage (Uac min)
Max. output voltage (Uac max)
Frequency (fr)
Frequency range (fmin - fmax)
Distortion factor
Power factor (cos Øac, r)
General Data
Dimensions (height x width x depth)
Weight
Degree of protection
Protection class
Overvoltage category (DC/ AC)
Night time consumption
Inverter type
Cooling
Installation
Ambient temperature range
Permitted humidity
DC connection technology
AC connection technology
FIGP60V-1
25V-1
Feed-in start voltage (Udc start)
Max. output current (Iac max)
FIGP55V-1
2.740W
11.9A
17.9A
Min. input voltage (Udc min)
Max. output power
FIGP50V-1
50V-1
673 x 434 x 250mm
23.8kg
968 x 434 x 250mm
36.9kg
IP54
1
2/3
ca. 1W
High Frequency Trasnformer
Regulated air cooling
Indoor & outdoor installation
from 20°C to +55°C
0% to 95%
Screw terminal connection 1.5mm2 - 16mm2
Screw terminal connection 2.5mm2 - 35mm2
SOL
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
15
THREE PHASE GRID TIE INVERTERS
The Fronius IG Plus generation of inverters represents an evolution of the proven Fronius IG product family. Power categories from 2.6 to 12kW promise suitability
for every possible system size. With a maximum effeciency of 95.9%, the Fronius IG Plus range achieves one of the highest values for transformer inverters.
Fronius inverters always achieve maximum yield, even when in the partial-load range.
This is all down to the unique Fronius Master Inverter X-Change system (MIXTM).
The "master" is allocated alternately, taking into account the operating hours worked.
Fronius transformer inverters use a high-frequency (HF) transformer. The automatic
transformer switchover facility produces three efficiency peaks. The result: a constant
level of efficiency across the entire input voltage range, resulting in higher yields.
kfd
With the Fronius Datamanager, we offer a WLAN interface in the
inverter itself. The inverter is connected to the internet without
additional cabling and grants you the perfect overview of how the PV
system is operating. (Optional)
kfd
Fronius inverters are ready for the Smart Grid of tommorrow.
A series of smart functions, known as Advanced Grid Features,
are built into the devices.
kfd
Code
Input Data
DC maximum power at cos Ø=1
Max. input current (Idc max)
Max array short circuit current
FIGP55V-3
FIGP60V-3
FIGP80V-3
FIGP100V-3
FIGP120V-3
20V-3
FIGP150V-3
55V-3
60V-3
80V-3
100V-3
120V-3
150V-3
5.250W
22.8A
34.2A
6.300W
27.5A
41.3A
7.360W
32.0A
48.0A
8.430W
36.7A
55.1A
10.590W
46.2A
69.3A
12.770W
55.6A
83.4A
Min. input voltage (Udc min)
230V
260V
370V
600V
230 - 500V
6
Feed-in start voltage (Udc start)
Nominal input voltage (Udc max)
Max input voltage (Udc,1)
MPP voltage range (Umpp min - Umpp max)
Number of DC inputs
Output Data
AC nominal output (Pac, r)
Max. output power
Max. output current (Iac max)
55V-3
60V-3
80V-3
100V-3
120V-3
150V-3
5.000W
5.000VA
7.3A
6.000W
6.000VA
8.7A
7.000W
7.000VA
10.2A
8.000W
8.000VA
11.6A
10.000W
10.000VA
14.5A
12.000W
12.000VA
17.4A
120V-3
150V-3
Grid connection (Uac, r)
3-NPE 400V/ 230V
180V
270V
50Hz/ 60Hz
46 - 65Hz
<3%
0.75 - 1ind./ cap
Min. output voltage (Uac min)
Max. output voltage (Uac max)
Frequency (fr)
Frequency range (fmin - fmax)
Distortion factor
Power factor (cosØac, r)
General Data
55V-3
Dimensions (height x width x depth)
Weight
Degree of protection
Protection class
Overvoltage category (DC/ AC)
Night time consumption
Inverter type
Cooling
Installation
Ambient temperature range
Permitted humidity
DC connection technology
AC connection technology
16
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
60V-3
80V-3
100V-3
1.263 x 434 x 250mm
49.2kg
IP54
1
2/ 3
ca. 1W
High Frequency Transformer
Regulated air cooling
Indoor & outdoor installation
from 20°C to +55°C
0% to 95%
Screw terminal connection 1.5mm2 - 16mm2
Screw terminal connection 2.5mm2 - 35mm2
SOL
FRONIUS ACCESSORIES
Code
Supply
CodeVoltage
Datalogger Web
Datamanager Card
Com Card
Power Control Box
FRONIUS-DW
FRONIUS-DM
FRONIUS-CC
FRONIUS-PCBOX
12VDC
230VAC (+10%/ -15%)
230VAC (+10%/ -15%)
12VDC
1.43W
2.2W
RS422 / Ethernet / WLAN, 6 Digital
Inpus, 4 Digital Inputs/Outputs
(Ripple Control Interface)
132 x 103 x 22mm
Datalogging for up to 4096 days.
Enables inverters to be connected
directly to the internet for remote
monitoring & control. Integrated
web server. Only 1 inverter in 100
needs to be fitted with this card.
Other inverters must be equipped
with com card.
60mA
1.3W
RS422 (RJ45) x2 (In/Out)
2,3 & 4-Stage ripple-control
signal receivers
197 x 110 x 57mm
Power usage
Interfaces
RS422 / Ethernet / USB
Relay: [email protected] / [email protected]
Dimensions
190 x 114 x 53mm
Information
Datalogging for up to 4096 days.
This enables you to get system
information for up to 100 inverters in real-time. Inverters must
be equipped with com card.
Sensor Box
Code
FRONIUS-SBOX
Fronius SBox
Power usage
Interfaces
Com card is a network card that
each inverter requires for data
communication.
c/w 3m Cable
FRONIUS-IS
Fronius IS
Remote-controlled power
reduction of PV systems
>100kW. Inverters must be
equipped with com card and
one datalogger is required per
system.
c/w 3m Cable
FRONIUS-MT Fronius PT1000
FRONIUS-WS
FRONIUS-AT
Fronius
WS
-
-
-
Mono Crystalline Si-Sensor
± [email protected]/m2
PT1000
-20°C to +150°C
Cup Anemometer
Pulse Output
18.79Hz = 1m/s
85 x 93 x 115mm
PT1000
-40°C to +180°C
12VDC
-
1.3W
-
140 x 100 x 28mm
Module Temperature Wind Speed Sensor Ambient Temperature
Irradiation Sensor
c/w 3m Cable
Supply Voltage
RS422 (RJ45) x2 (In/Out)
Dimensions
197 x 110 x 57mm
110 x 40 x 40mm
50 x 100mm
Information
Measurement of additional data by connecting
various sensors.
This sensor is for
measuring the irradiated
energy.
Sensor on adhesive film
for module temperature
measurement.
Ø 6 x 50mm
The sensor measures the
exact speed of the wind.
Sensor for measuring
indoor & outdoor
temperature.
PURE SINE WAVE INVERTERS
Phoenix range of inverters are suitable for the widest range of applications. The design criteria have been to produced a true sine wave inverter with optimized
efficiency but without compromise in performance. Employing hybrid HF technology, the result is a top quality product with compact dimensions, light in weight and
capable of supplying power, problem-free to any load. A unique feature is very high start up power.
Phoenix Inverters
Code 12V
Code 24V
Code 48V
Max. con Power (25°C)
Peak power (W)
Input DC range
GX-12/180
GX-24/180
-
GX-12/350
GX-24/350
GX-48/350
GX-12/800
GX-24/800
GX-48/800
GX-12/1200
GX-24/1200
GX-24/1200
180VA/175W
350VA/300W
800VA/700W
1200VA/1000W
350
700
1600
2400
10.5 - 15.5VDC / 21 - 31VDC / 42 - 62VDC
Output voltage
No. Load Consumption
2.6W / 3.8W
3.1W / 5W / 6W
Battery connection
Dimensions
9.2 - 17.3VDC / 18.4 - 34VDC / 36.8 - 68VDC
230VAC +/- 3% 50Hz or 60Hz +/- 0,1%
6W / 5W / 4W
6W / 5W / 6W
108x165x305
108x165x305
Screw terminals
72x132x200
72x155x237
Features
• Extra start-up power
• Low Battery Protection
• Self diagnostic function
• LED fault diagnosis
SOL
• Remote on/off switch
• Input/output protection
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
17
SOLAR CHARGE CONTROLLER
The BlueSolar range includes both MPPT & PWM type charge controllers. Ultra fast maximum power point tracking (MPPT) will limprove energy harvest by up to 30%
compared to PWM charge controllers. Pulse width modulation (PWM) charge controllers offer lower cost solutions with 3-stage battery charging and comprehensive
protection.
BLUESOLAR-5
BLUESOLAR-10
BLUESOLAR-20
Rated charge current
5A
10A
20A
15A
40A
70A
Max. load current
10A
10A
20A
15A(Cont.) / 50A(Peak)
15A
70A
12/24V (Auto)
12/24V (Auto)
12/24V (Auto)
12/24V (Auto)
12/24V (Auto)
12/24/36/48V (Auto)
PWM
PWM
PWM
MPPT
MPPT
MPPT
Code
Voltage
Control method
Max. solar voltage
Dimensions
BLUESOLAR-15
BLUESOLAR-40
BLUESOLAR-70
SAP-20007AW-PACK
28/55VDC
28/55VDC
28/55VDC
70VDC
28/55VDC
150VDC
70 x 133 x 34mm
70 x 133 x 34mm
76 x153 x 37mm
100 x 105 x 40mm
202 x 66 x 140mm
350 x 160 x 135mm
PRECISION BATTERY MONITORING
The essential function of a battery monitor is to calculate ampere-hours consumed and the state of the charge of a battery. Ampere-hours consumed is calculated by
integrating the current flowing in or out of the battery. Victron Battery Monitors are based on a powerful micro-processors programmed with algorithms for precision
monitoring.
For 2 Batteries
Code
Input voltage
Current drawn
Battery capacity
Comm port
Potential free contacts
Dimensions
BMV600S
BMV602S
BMV600HS
VE.NET-BC
VE.NET-HVBC
9.5-90VDC
9.5-90VDC
70-350VDC
0-75VDC
70-350VDC
<4mA
<4mA
<4mA
<4mA
<4mA
20-9999AH
20-9999AH
20-9999AH
20-60000AH
20-60000AH
Yes
Yes
Yes
Yes (VE. NET)
Yes (VE. NET)
60V/1A/(N/O)
60V/1A/(N/O)
60V/1A/(N/O)
60V/1A/(N/O)
60V/1A/(N/O)
69 x 69mm
69 x 69mm
69 x 69mm
22 x 75 x 105mm
22 x 75 x 105mm
PRECISION WATERPROOF BATTERY CHARGERS
Completely encapsulated waterproof, shockproof and ignition protected. Protected against overheating. LED Status indication. High efficiency. Adaptive charging.
IP65
Code
GX12/7
Supply voltage
Charging current
200 - 265VAC
7A
IP65
IP67
IP65
GX12/17
GX24/3
GX24/8
GX24/12
200 - 265VAC
200 - 265VAC
180 - 265VAC
200 - 265VAC
17A
3A
8A
12A
Charging type
3-Stage
3-Stage
3-Stage
4-Stage
3-Stage
Charge voltage
14,4 / 13,7
14,4 / 13,7
28,8 / 27,4
28,8 / 27,4
28,8 / 27,4
43 x 80 x 155
47 x 99 x 193
43 x 80 x 155
99 x 219 x 65
47 x 99 x 193
Dimensions
18
IP65
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
SOL
PV JUNCTION BOXES
Generator disconnection boxes are enclosures where PV arrays are electrically connected and where the isolation functon is performed in order to permit maintenance
work to be done. Junction boxes are supplied complete with fuse, surge and overload protection.
According to standards
• IEC 60634-7-712
• IEC 60943-7-3
• EN 61439-1-2
• IEC61643-11
NB: GRP= Glass reinforced Polyester
Code
Strings
Voltage
Isc
Surge Protection
IP Rating
Material
ST031025P
ST041025P
ST068060P
ST148012P
SH161012
3
4
6
14
16
1000 VDC
1000 VDC
800 VDC
800 VDC
1200 VDC
25A
25A
63A
125A
160A
PST31PV
PST31PV
PST31PV
PST31PV
PST31PV
IP65
IP55
IP55
IP55
IP55
ABS/PC
GRP
GRP
GRP
GRP
Size (mm)
Gland Size
M12/M16
M12/M16
M12/M16
M12/M16
M12/M16
225 x 305 x 130
285 x 380 x 185
285 x 570 x 185
380 x 760 x 225
760 x 380 x 225
HIGH RATING DC SWITCH DISCONNECTORS
Series 55DC/ 55PV switch-disconnectors are manually operated load break switches that provide safetyy
isolation for any low voltage circuit in photovoltaic applications.
According to standards
• IEC 60947-3
• IEC 60364-7-712
• EN 60947-3
• DIN VDE 0126
• VDE 0660-107 (1992)
• IEC 60364-4-410 9
General Characteristics
• Visual indication of contact position
ion
• High thermal and dynamic withstand
• Operational load duty categories DC-21 and DC-22
Series bridges to be ordered seperately
Protection to ensure the safety against electrical shocks
Code
220VDC
400VDC
600VDC
800VDC
1000V
55DC4014
55DC4026
55PV4012
55PV4016
125ADC
250ADC
-
125ADC
250ADC
-
80ADC
125ADC
-
63ADC
125ADC
-
125ADC
160ADC
Technical
55DC4014
55DC4026
55PV4012
55PV4016
Rated insulation voltage Ui
Rated impulse withstand voltage Uimp
1000VDC
8kV
1000VDC
8kV
1000VDC
12kV
1200VDC
12kV
For specific types
Accessories
For all types
200mm
Type
55DC4014
55DC4026
55PV
Lockable
Lockable
Internal Handle
External
Handle + Shaft
Series Bridge
Terminal screen
26995042
26995052
26995052
55K1G200
55K1G200
55K1G200
41DC4014
41DC4026
26092025
26984012
26984020
26984020
Set of 2
SOL
Auxilliary
Inter phase barrier
contacts
14001020 (200m) 26990031 (1NO/1NC)
14001025 (250m) 26990032 (2NO/2NC)
29980024
14001032 (320m)
14001050 (500m)
Shaft Extender
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
19
DC SWITCH DISCONNECTORS
Manually operated multiple load break switches that
ensure safe on-load opening and closing of photovoltiac
circuits on small and medium systems.
• Double breaking mechanism
• Contacts in series to optimize electrical characteristics
• External series links mounted in factory
• Silver alloy contacts
Code
IP20 - Finger safe
Series links mounted in factory
Voltage
A-5342PVO
A-5362PVO
A-5382PVO
A-5102PVO
-
M5
10-25
10-16
4
M5
10-25
10-16
4
M5
10-25
10-16
4
M5
10-25
10-16
4
35ADC
-
25ADC
20ADC
15ADC
-
25ADC
10ADC
-
25ADC
Connecting Screw
Standard wire (mm2)
Flexible (mm2)
Impulse Voltage Uimp kV
Current ratings @ load duty category DC - 21
300VDC
400VDC
500VDC
600VDC
800VDC
1000VDC
-
Double breaking
mechanism avoids
arching due to high
speed closing or
opening, independant
of operator turning
speed and pressure.
Accessories
Code
Description
AK1200523
Padlockable operating
handle
AK0100007
AK0000003
DIN Rail mounting
Plate
Base mounting plate
AK1740003
DIN Rail mounting kit with extension
shaft and door interlock.
PV COMPACT ENCLOSED ISOLATORS IP65
The IS-PV Series has been designed in order to offer optimum performance with enclosed switch disconnectors that use standard MC4 connectors, creating
extremely easy to install and connect solutions.
Simple & fast plugin
General Characteristics
• Original and compact design
• Base mounting
• Enclosure UV resistant
• Auxiliary contacts option
Padlockable Handle
Available
Code
Description
20
A-5342MC7
PV switch isolator 35A @
300VDC
(MC4 included)
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
A-5362MC7
A-5382MC7
PV switch isolator 25A @
400VDC/ 20A @ 500VDC
(MC4 included)
SOL
TEC
PV switch isolator 25A @
600VDC/ 16A @ 800VDC
(MC4 included)
A-5102MC7
PV switch isolator 25A @
1000VDC
(MC4 included)
LIGHTING & SURGE PROTECTION
Special Surge Protection for Invertors (e.g. Wind Turbines)
Max.
Uc
Class No. of
Code
Discharge Up
Poles
8/20µS
SLP-880V/3
3
2
40kA
<3.2kV
Photovoltaic System Protection
Max
No of
Code
Discharge
Poles
8/20µS
880V
Nominal
Discharge Up
8/20µS
2
15kA
40kA
2
20kA
40kA
3
20kA
40kA
3
20kA
40kA
Uoc stc refers to the maximum voltage of the photovoltaic panel
0.8kV
4.0kV
2.4kV
3.6kV
SLP-170PHV/2
SLP-600 V/U
SLP-700PHV/3
SLP-1000PHV/3
Backup
MCB
Network
DIN
Width
160A
TN-S/TN-C/TT
3
Uc
Uoc stc
DIN Width
170VDC
600VDC
350VDC
500VDC
170VDC
720VDC
700VDC
1000VDC
2
2
3
3
Uc
DIN Width Auxilliary
GPV FUSE PROTECTION
Photovoltaic System Protection
No of Imax
Code
Class Poles 8/20
In
80/20
Iimp
Up
10/350
PST25PV
2
2
40kA
20kA
-
2.2kV
550VDC
2
N
PST31PV
2
3
40kA
20kA
-
3.0kV
1000VDC
3
N
PST41PV
1+2
2
-
40kA
12.5kA
1.9kV
1000VDC
3
Y
PST25/31: Surge protection devices Class II are developed to protect PV Photovoltiac networks against atmospheric lightning. These
units must be installed in parallel on the DC networks to provide common and differential mode protection. The design is based on
high energy MOVs equipped with specific thermal disconnectors and related failure indicators.
PST41: Surge protector devices Class I are recommended for both ends of the DC power supply line. Due to their extraodinarily
high discharge capacity, they are recommended for use on installations with elevated risk of direct lightning strikes. The protection is
based on high energy MOVs and specific thermal disconnectors achieving a superior protection level and a lack of follow-up current.
GPV FUSE PROTECTION
A range of fuse links in a 10 x 38mm packaging specifically designed for protection and isolation of photovoltiac strings.
The fuse links are capable of interrupting low overcurrents associated with faulted PV string arrays.
Temperature Derating Curves
General Characteristics
• Rated Voltage: 1000Vdc
• Time constant (L/R): under 1ms
• Rated breaking capacity: 33kA (VDC)
• Minimum interrupting rating 1.3 x In
Code
Current Rating
Power Loss
0.8In
In
30F6PV
30F8PV
30F10PV
30F12PV
30F15PV
30F20PV
6A
8A
10A
12A
15A
20A
1.1W
1.2W
1.3W
1.5W
1.7W
2.1W
1.8W
2.1W
2.3W
2.7W
2.9W
3.6W
DC FUSEHOLDERS
10x38 Fuse Holders for DC Applications
DIN
Thermal
Code
Fuse Size Poles Modules
Rating
211PV
32A
10 x 38
1 pole
1
Accessories
Code
Description
21KE
According To
• IEC 60947-1
• IEC 60947-3
Multipole assembly kits
Characteristics
• 1000VDC - DC-20B
• Mounting 35mm DIN rail
• Hight temperature resistant plastics
• Elevated insulation characteristics
SOL
For multipole fuse holders use multipole assembly kits - 21KE
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
21
PV JUNCTION BOXES
Make your solar installation more cost effective by reducing the wiring, improve reliability and reduce maintenance.
Characteristics:
Code
• Equipped with PV
dedicated surge arrestor
• With function or arrestor
failure alarm
• Adaptable to various
communication modules:
RS-485.
• Wireless communication
available ex-indent.
PV Array input voltage
PV Array Input string no.
PVJ-BOX16
<1000V
16
Maximum current of each string
Protection level
10A
IP65
Ambient temperature
-25°⁓+55°C
Relative humidity
<95%
Communication mode
RS-485, RS-232
Note: Includes DIN mount 24VDC 1.25A Power Supply
SOLAR MODULE ANALYSER
Code
PROVA200
PROVA300XP
Analyser
Printer
Description
• Maximum current (Imaxp) at Pmax
• Voltage at open circuit (Vopen)
• Current at short circuit
• Calculation of efficiency (%)
• Manual single point test
•
•
•
•
Voltage range: 0-60VDC
Current range: 0-6A
I-V Curve test for solar cell
Maximum solar power (Pmax) search by
Auto-scan (60V, 6A)
• Maximum voltage (Vmaxp) at Pmax
SOLAR PANEL MOUNTING SYSTEM
Pre-Assembled Brackets
Aluminium Profile - 4m
Cover for gap between panels - 4m
BMF4001
BMF4100
Profile Joint
Positioning Support
BMF4003
BMF4110
Pre-Assembled Pole Bracket
Watts
1 Panel
2 Panel
DM110
5-10W
–
20W
DM120
–
40-60W
DM275
DM175
Pre-Assembled Triangle Bracket
Galvanised
Watts
1 Panel
60-120W BMF4301
170-270W –
2 Panel
–
DR275
Bracing Bar
Code
Alluminium or
Galvanised
Description
BMF4302 4m Bar 13x6mm Alu.
Solar Panel Clamps - (packs of 10)
End Clamp
End
Code
22
Fixing Bracket
BMF4501
Adjustable
Tile Hook
BMF4002
Adjustable
Roof Tile Hook
Fixing Accessories - Stainless Steel
Mid Clamp
Module Middle
Thickness Code
BMF4021
BMF4022
BMF4023
BMF4024
BMF4025
BMF4026
BMF4027
BMF4028
BMF4029
Clamp for
Crimped Plate
34
35
36
38
40
Module
Thickness
34 ÷ 37
BMF4011
38 ÷ 42
BMF4012
43 ÷ 47
BMF4013
48 ÷ 50
BMF4014
End Caps (packs of 10)
BMF4004
BMF4005
42
46
48
50
BMF4401
BMF4008
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
BMF4402
Fixing Plate: 150x55x5mm Fixing Plate: 50x200x5mm
SOL
BMF4006
BMF4303
Code
Description
Pack
BMF4004
BMF4006
BMF4005
BMF4303
M8 x 20 Hammer-headed screws
M8 x 20 Hexagonal head screws
M8 Self-blocking flanged nut
4,8 x 32 Self-tapping hex screws
50
50
50
100
SOLAR MOUNTING SYSTEMS
We provide professional solutions for Solar photovoltaic mounting for residential, corporate and utility scale applications.
Features • Roof Top mounting: Tile, Tin & Tilt Tin/ tiled • Open area: Ground mounting/ pole mounting • Suitable for all roof types and PV modules
• Fast and simple installations
• High quality material in Aluminium 6005-T5
Panel Mounting
Code
Description
CK-FZ-F4200
CK-FZ-SK
CK-FZ-AM
CK-FZH-01
Solar standard rail 4.2m
Solar standard rail splice
Adj Solar mid clamp
Solar SUS304 Tile Hook
CK-FZH-013
CK-FZH-TC
CK-FZ-AE
CK
FZ AE
CK-FZH-021
Solar aluminium tin hook
Solar tin roof AL Clamp
Adj end clamp
Solar tin thin roof AL Clamp
Code
Description
Code
Description
CK-FZA-FL
CK-TM-1530
CK-2V-3035
CK-FSC-CP1
Solar Adj front leg
Solar Adj Tri structure 15-30
2V ground support 30/35 deg
Solar Cable Clips
SOLAR ROOF TILT RACKING SYSTEM
ACDC is continually developing kits to use with our panels. These kits are designed for the most rugged conditions and consist of the highest quality components.
Code
GR-AD-FL
Description
Front Support
* Use the following Parts Code: CK-FZ-F4200 (Solar Panel Profile)
GR-AD-FL 10/15
GR-AD-FL 15/30
Rear Support - 10-15cm
Rear Support - 15-30cm
GR-AD-FL 30/60
Rear Support - 30-60cm
Specifications • High class aluminium alloy Al16005-T5 & stainless steel 304
• PV Modules: framed • Roof Slope: up to 60° • Suitable for pitched or flat roof
8 PANEL MOUNTING KITS
Kits include:
• Frame work & Clamps
• Structure fixing bolts/nuts
• Profile 4.2m
• Suited for 170-290W
Code
Description
Code
Description
CK-PM-08
CK-TL-08
CK TL 08
CK-TN0-08
Pole mounting kit
Tile mounting kit
Tin mounting kit
CK-TNC-08
Tin clamp mounting kit
CK-GD-08
Ground mounting kit
SOL
CK-UT-08
Utility Ground mounting kit
CK-ADJ-08
Tin tilt mounting kit
CK-V2-08
Tin tilt mounting kit
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
23
SOLAR OFF-GRID MOUNTING KITS
ACDC Dynamics provides complete off-grid mounting kits. These kits include all brackets and
hardware needed to mount panels on any surface such as: walls, roofs, caravans, poles and etc.
Solar SLB series off-grid mounts. Fit for 1 Panel.
Code
SLB-0111
SLB-0112
SLB-0113
SLB-0102
SLB-0103
Module Frame
Mounting Holes
Module Power
Mounting Type
18mm
5.5mm x 8
5W
PoleMounted
30/35mm
3.5mm x12
10-30W
PoleAdjustable
35mm
4.5mm x 12
40-135W
Wall, Vertical
Surface
Adjustable
35mm
4.5mm x12
40-135W
Fixed
Bracket
35mm
4.5mm x12
40-135W
Flat
Surface
Adjustable
SOLAR-FLEX ADHESIVE
Features
Solar-Flex white - 290ml
Code
PV CONNECTORS IP67
WST-SAF-W
Elastic one-component
adhesive and sealant with fast
development of adhesive
strength.
It contains no substances that
hinder the coating of laquer
(eg. silicone), no solvents and
no isocyanate.
• For connecting to panel contacts
• Durable and weather-resistant
• Modules protected by means of
one or more diodes
• Temperature Range:
-40˚C - +90˚C
• UV-Resistant
• High-quality contacts
• Material: Contact: CuSn
Casing: PC/PA
Code
Description
Cable Size
903709
PV panel box enclosure
2.5-10mm2
PV MC4 Female Branch Connector
For secure and easy connection of PV modules in parallel.
MFF= Male/ Female/ Female Connectors
Solar-Flex has a very high initial
adhesive strength and also
enables adhesive bonds on
vertical surfaces indoors and
outdoors.
Code
Description
Pack
905228-1
PV MC4 MFF Branch
1
PV MC4 Male Branch Connector
FMM= Female/ Male/ Male Connectors
For strongly stressed adhesive
bonds in the following areas:
Code
Description
Pack
905229-1
PV MC4 FMM Branch
1
• Solar Power systems;
• Junction Boxes;
• Marking systems;
• Metalworking;
• Tank and apparatus
construction;
• Ventilation and air conditioning
and wherever silicone or
products containing
silicone are unsuitable.
PV MC4 Female Coupling Connector
• High initial adhesive strength on vertical surfaces;
• Broad range of adhesion, even on moist surfaces;
• Resistant to weathering and UV;
• Free of silicone, isocyanate and halogen;
• Solvent-Free, odour-free, non-corrosive;
• Sandable & can be painted over even when wet.
Cable Ø mm
Pack
2.5mm2
2.5mm2
4-6mm2
4-6mm2
3-6
5.5-9
3-6
5.5-9
1
1
1
1
Code
Core Cross
Cable Ø mm Pack
905206-1
905208-1
905210-1
904963-1
2.5mm2
2.5mm2
4-6mm2
4-6mm2
3-6
5.5-9
3-6
5.5-9
1
1
1
1
PV MC4 Fly-Leads
P3
1000VDC UV Resistant
24
Core Cross
905207-1
905209-1
905211-1
904964-1
PV MC4 Male Coupling Connectors
Advantages:
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
Code
SOL
Code
Description
SLE-1M
SLE-2M
SLE-5M
SLE-10M
1m 4mm PV Cable(Black) MC Male & Female
2m 4mm PV Cable (Black) MC Male & Female
5m 4mm PV Cable (Black) MC Male & Female
10m 4mm PV Cable (Black) MC Male & Female
SOLAR CABLE
• Rated Voltage: 600/1000VAC 900/1500VDC
• Stranded tin-plated copper insulated with
XLPE under a PVC jacket.
Solar Cable (100m roll)
WIR
Code
Size mm2
SW101
SW102
SW103
2.5mm
4mm2
6mm2
Amps
2
25
32
41
INSTALLATION TOOLS & ACCESSORIES
Wire Stripper
ED
ENT
PAT DOT
RED RD
AWA
ED
ENT
PAT DOT
RED RD
AWA
ED
ENT
PAT DOT
RED RD
A
W
A
Solar Tool Kit
Maxi Grip
X-PRO 50mm Shears X-PRO 50mm Shears
Wire Stripper
MET
Code STRIP-7-SOLAR STRIP-SOLARMINI
An automatic stripper for
round cables used in PV
solar and electric fence
installation. Precise
adjustment allows easy
removal of multiple
insulation layers of solar
cables from 1,5-6mm².
BM1325
BM1330
• Stripping depth stop • Innovative new spring
loaded opening action
• Compact wire
• For the easy stripping
stripper designed
for the solar industry and cutting of cables
• Especially designed
• Suits 1.5-6mm2
blade for cutting of
cable
aluminium and copper
• Side blade cutter
cables up to a size of
50mm²
• Innovative automatic
opening system with
spring for an effective
cable stripping & cutting
• Innovative design with
bi-component handles
gaurenteeing less
cutting effort & better
palm hold
• Blade geometry with
variable edge
PV-BOX
BM1311
• Wire Shears
Aluminium box with foam
cushion for PV tools.
• Bi-Component
All tools in storage.
handle for greater
cutting force
• Non-slip serrated Solar Connector Spanner
blades
• Tempered stainless
steel blade
• Belt clip holder
PV-STX
SOLAR PUMPING SYSTEMS
• The system dispenses with energy storage devices, and stores water instead of electricity. It improves the reliability of the device and at the same time, it lowers
the construction and maintenance costs of the system dramatically.
• Patented technology adopted for controlling, automatic running, excellent stability and 98% energy conversion ratio.
• Full protection against lightning, dry running, blocking and overload.
Application:
• Desert control
• Sea water desalinization
• Agricultural irrigation
• Daily water supply
• Forest irrigation
• Remote watering troughs for animals
• Waste water treatment
Code
KW
Description
Head (m)
Flow Water No. of PV
(m³/day)
Panels
PS370-1
PS550-1
PS750-1
PS1100-2
PS1500-2
PS2200-1
PS3000-1
PS4000-1
0.37KW
Solar Pumping System
27-35m
10-7.5m³/day
20 x 40W
0.55KW
Solar Pumping System
37-52m
10-7.5m³/day
20 x 60W
0.75KW
Solar Pumping System
45-61m
10-7.5m³/day
20 x 80W
1.10KW
Solar Pumping System
54-73m
10-7.5m³/day
20 x 120W
1.50KW
Solar Pumping System
68-91m
10-7.5m³/day
10 x 270W
2.20KW
Solar Pumping System
91-133m
10-7.5m³/day
22 x 170W
3.7KW
Solar Pumping System
118-169m
15-10m³/day
28 x 170W
5.5KW
Solar Pumping System
155-207m
15-10m³/day
36 x 180W
Order PV Panels Separately
Inverter Only
Code
Rated Output MPP
Current
Voltage
PB400L
PB750L
PB1500L
PB2200L
PB3700H
PB5500H
3A
5A
7A
11A
9A
13A
280-350V
280-350V
280-350V
280-350V
500-600V
500-600V
System incl Inverter, Pump + Cable 30m + Connections
Features:
• Solar pumping inverter converts DC voltage from the solar array into AC voltage to drive the pump.
• With the function of MPPT (maximum power point tracking), it regulates the output frequency according to irradiation in real time to achieve the maximum power.
Product Advantages:
• To drive pumps equipped with 3-phase induction motors.
• Optimized SPWM (Sinusoidal pulse width modulation).
• Various operation modes and MPPT algorithms are available.
• Option of water-level detection and control is available.
• Adjustable speed range of pump based on the actual situation (available solar power)
of the system
• Protection functions: lightning, over/low input voltage, over current and overload
protection, etc.
SOL
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
25
DC SUBMERSIBLE PUMPS
Features
• Floating impeller design
prevents sand blockages
• Highly durable
• Can handle upthrust load
Application
Accessories Included
• Domestic & Municipal
water supply
• Irrigation
• Industrial & Mining
• Ponds & Gardens
• Liquid Level Sensor
• Torch light
• Connecting cable
• Control Box
• Water level Sensor
Order PV Panels Separately
Code
Voltage
3TSS 0.5-28-12/80
3TSC 1.9-32-36/250
3TSC3.5-34-48/400
3TSC2-80-48/400
4TSS2.5-70-48/500
4TSS1.8-120-96/750
4TSS2.5-140-110/1000
4TSC4-57-48/500
4TSC12.5-44-110/1000
5TSS5-80-110/1200
Power
12VDC
36VDC
48VDC
48VDC
48VDC
96VDC
110VDC
48VDC
110VDC
110VDC
Max. Flow Rate
3
80W
200W
400W
400W
500W
750W
1000W
500W
1000W
1200W
0.5m /h
1.9m3/h
3.5m3/h
2m3/h
2.5m3/h
1.8m3/h
2.5m3/h
4.0m3/h
12.5m3/h
5m3/h
Max. Head
28m
32m
34m
80m
70m
120m
140m
57m
44m
80m
Pump Size
Solar Panels
100W x 1
90W x 3
130W x 4
170W x 4
130W x 4
80W x 14
100W x 14
170W x 14
100W x 14
100W x 16
3"
3"
3"
3"
4"
4"
4"
4"
4"
5"
nd
ly
DC SOLAR FOUNTAIN PUMPS
Eco-F
rie
Accessories
Application Area
Pump Controller, Brass Impeller,
Cable Connector, Water Level
Sensor, Cable for Solar Panel,
Solar Flash Light.
This product is mainly used
for fountain pumps, circulation or small irrigation applications.
TSQB
Pump Type
Voltage
Power
Max. Flow Rate
TSQB2.0-25-24/120
TSSGJ3.2-18-24/120
TSQB2.2-37-36/210
24VDC
24VDC
36VDC
120W
120W
210W
2m3/h
3.2m3/h
2.2m3/h
Max. Head
25m
18m
37m
I/0 Size
1" x 1"
1" x 1"
1" x 1"
Order PV Panels Separately
Required PV Panels
80W x 2
80W x 2
90W x 3
DC SOLAR POOL PUMPS
Accessories
nd
ly
Pump Controller, Brass Impeller,
Cable Connector, Water Level
Sensor, Cable for Solar Panel,
Solar Flash Light.
Eco-F
rie
Application Area
This product is mainly used for
swimming pool pumping applications.
Pump Type
Voltage
Power
Max. Head
I/0 Size
Required PV Panels
TSSP16-15-48/500
48VDC
500W
16m3/h
15m
1.5" x 1.5"
170W x 4
TSSP18-12-72/750
72VDC
750W
18m3/h
TSSP25-15-110/1200
TSSP30-20-110/1500
26
Order PV Panels separately
Order PV Panels Separately
TSSP
110VDC
110VDC
1200W
1500W
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
Max. Flow Rate
12m
2" x 2"
80W x 14
3
15m
2.5" x 2.5"
100W x 16
3
20m
3" x 3"
100W x 16
25m /h
30m /h
SOL
SOLAR GEYSER
Solcrafte Solar Hot Water Solutions
Solcrafte is a solar collector with an integrated tank. It offers various benefits such as frost
protection, easy installation and aesthetic design. Quick installation saves you time and money.
Solcrafte is the answer: connect it either directly to the water lines or pre-feed it into an existing
geyser. Standard packaging includes a mounting kit (either on-roof @ 0º or flat roof @ 45º), a
Twin Port valve and a Pressure Reducing valve.
Code
Perfect for
use as stand-alone
unit or as a prefeed
system for a geyser.
Number of collectors
Collector area
Tank size in liters
Size (L x W x H)
Max Temp/Pressure
*Mounting system 0° / 45°
SOL 90-*
SOL 150-*
1
1.1m2
90l
2184x510x212mm
100˚C/4 bar
Incl.
1
1.8m2
150l
2184 x 800 x 212mm
100˚C/4 bar
Incl.
SOL 200-*
1
2.4m2
200l
2184x1100x212mm
100˚C/4 bar
Incl.
Accessories
Code
Description
SOL-1279
Optional screw-in heating element (2kW)
Filling pump with container hose and pressure pump (for filling and
bleeding the collector system)
Anti-freeze concentrate 5l (Polypropylene Glycol)
Anti-freeze concentrate 10l (Polypropylene Glycol)
SOL-1039
SOL-1037/ 5
SOL-1037
Optional - Pool Heating Set "Complete"
Code
Description
Heating Element
Filling Pump
F
SWT20
Heating kit for swimming pools
of up to 30,000 lt. Kit consists
of 4 collectors, SWT20 heat
exchanger, circulation pump
and an 18 litre expansion tank
SOL-3172
* Mounting brackets and Anti-Freeze not included.
HEAT PUMPS
Using a small amount of energy, a heat pump simply transfers heat from one source to another in order to create hot and cold water
for residential, commercial and industrial applications.
Code
Power Supply
Rated Heating Capacity
Rated Power Input
Refrigerant
Compressor Type
Max. Outlet Water Temp.
Noise
COP (heating/ work done)
SDAW025-300L
SDAW3.5-220
SDAW4.6-220
SDAW6.7-220
SDAW11.2-380
220V / 1Ph /50Hz
2.6KW
0.75KW
R410A
Rotary
50°C
48dbA
3,5W/W
220V / 1Ph /50Hz
3.5KW
0.9KW
R410A
Rotary
60°C
52dbA
3,89W/W
220V / 1Ph /50Hz
5KW
1.28KW
R410A
Rotary
60°C
53dbA
3,91W/W
220V / 1Ph /50Hz
7.2KW
1.79KW
R410A
Rotary
60°C
54dbA
4,02W/W
380V / 3Ph /50Hz
10.5KW
2.55KW
R417A
Rotary
60°C
55dbA
4,12W/W
SABS SOLAR GEYSER
High Pressure System - SABS Approved
Code
Tank Length ( mm)
Tank
Capacity
Collector
Collector
Area (m2)
ASHP-1858-15
ASHP-1858-20
1680
2160
150L
200L
15 Tubes
20 Tubes
1.86
2.49
Low Pressure
High Pressure
Low Pressure System - SABS Approved
Code
Tank Length ( mm)
Tank
Capacity
Collector
Collector
Area (m2)
SL-NF1.8-16
SL-NF1.8-18
1225
1446
100L
150L
16 tubes
18 tubes
1.67
1.88
Accessories for Low Pressure System - SABS Approved
Code
Description
SL-NF16-TUBE
SL-NF18-TUBE
SL-NF-FTANK
Spare Glass Tube for 100L low pressure
Spare Glass Tube for 150L low pressure
Spare filler tank for 100/ 150L low pressure
Order Mixing Valve Seperately
Code
SL6-C1301BX003
Mix/Tempering Valve
• Inner tank: SUS304-2B (Low Pressure), SUS316 (High Pressure)
• Working pressure: 0.6MPA (High Pressure), 0.1MPA (Low Pressure)
• Vaccum tube: 58*1800mm 2.2mm thickness with special coating to aid absorbtion
• Frame: Galvanized steel 1.5mm
• Insulation: 50mm of high density polyurethane foam - Heat preservation: 72hrs
• Hail resistance: 40mm
All the prices include tank, heat pipe vacuum tubes, frame, P/T valve, Air vent valve, Magnesium rod, screws & nuts and carton box only.
SOL
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
27
WIND GENERATORS
Deltatronic wind generators are the latest design in wind generating technology. Units are built for harsh environments
using aluminium and stainless steel. Wind speed, vibration and generator RPM are electronically analysed and
controlled. Fitted with an emergency electronic braking system. The high quality alternators fitted to the generators are
manufactured exclusively for Deltatronic by Ducati energia.
Code
DTWIND-3000
DTWIND-1500
3000W
Maximum Power
1500W
0-300VAC
Output Voltage
0-300VAC
12V x 4 (102Ah batteries)
Aux. Voltage
12V x 2 (102Ah batteries)
Yes
Pure Sine Inverter
Yes
Yes
Charge Regulator
Yes
2m/sec (7.2km/h)
Start Speed
2.2m/sec (8km/h)
12.5m/sec (45km/h)
Run Speed
12.5m/sec (45km/h)
3
No. of Blades
3
3.1m
Blade Dia
2.1m
-20˚C to +45˚C
Temp Range
-20˚C to +45˚C
Yes
Wind Brake
Yes
* Kits Includes: All accessories except the 6m mounting pole.
Mounting pole specification available from our technical department.
Spare Parts
Code
Description
Code
Description
6061T6
DTANE
JACK05
DTKIT-1
Aluminium blade for DTWIND-1500/3000
Anemometer, wind speed monitor
DT Wind System controller
Ball bearings, slipring assembly, rectifier,
gas shock absorber
DTKIT-2
DTALT
DTINV-1500
DTINV-3000
SY120102
Complete body assembly
Alternator (same for both models)
1.5kW Inverter for DTWIND-1500
3.0kW Inverter for DTWIND-3000
12V 102Ah Battery
HYBRID WIND & SOLAR TURBINES
Q-Series are small all-weather wind turbines which produce 400-1000W. These units are small in size, easy to install,
low cost, high efficiency, and could be used in a variety of geographical climate conditions.
Kit Code
Q400
Q600
Q1000
Rated Power (W)
Rated Voltage (VDC)
Rated Current (A)
Rotor Diameter (M)
Start-Up Wind Speed (m/s)
Rated Wind Speed (m/s)
Max. Wind Speed (m/s)
400W
24
16
1.5
2.5-4
9.6
45
600W
24
25
1.6
2.5-4
10.5
45
1000W
48
41
1.8
2.5-4
13
45
Permanent magnet
synchronous generator
Permanent magnet
synchronous generator
Permanent magnet
synchronous generator
Mechanical
15-20yrs
Mechanical
15-20yrs
Carbon Fibre Reinforced Plastic
Mechanical
15-20yrs
3
6m
Sine Wave
3
6m
Sine Wave
3
6m
Sine Wave
Wind Turbine Type
Yaw Mode
Wind Turbine Lifespan
Blade Material
Blade Quantity
Tower Height
Matched Inverter Type
Kit Includes: Sine Wave Inverter, Wind Turbine, Blades, Pole and Wind/Solar Hybrid Controller
Hybrid Charge Controller
Code
Wind Turbine Max Power (W)
Rated Battery Voltage (V)
Wind Turbine Max Input Current (A)
PV Max Charge Current
Display
Output Voltage
Output Current
28
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
SOL
SOL
SPWS05A-24 SPWS06A-24
500W
24V
40A
10A
LCD
28V
0-25A (adj)
600W
24V
40A
10A
LCD
28V
0-25A (adj)
SPWS10A-24
1000W
48V
60A
10A
LCD
56V
0-50A (adj)
LED SOLAR LIGHTS
c/w motion sensor
Code
Rated Power
Battery
PV Panels
Working time
Detection distance
Dimensions
c/w Daylight sensor
RW-X12A
RW-X12B
LS48M-2
LS48M-5
16pcs 3528 LED
3.7V, 800mAh
1.0W Amorphous
8hrs (fully charged)
80H x 95W x 125D
16pcs 3528 LED
3.7V, 800mAh
1.0W Amorphous
50 sec (PIR sensor)
2m
80H x 95W x 125D
2 W (Watts), 120Lm
3.7V 2000mA
2W Amorphous
30 sec (PIR sensor)
5-7m
55H x 221W x 320D
5 W (Watts), 240Lm
7.4V 2000mA
5W Monocrystalline
30 sec (PIR sensor)
5-7m
55H x 221W x 320D
COMPACT SOLAR STREET LIGHTING IP65
• Ideal for Eco Estates.
• All in one Battery and Solar panel
• Colour Temp: 6000-7000k
• Light is dim when no movement
5-10W - Self-contained
(Top View)
Code
LS48-5
LS48-8
LS48-10
LS48-20
LS48-30
LS48-40
Power
5W
8W
10W
20W
30W
40W
Solar Module
12W
18W
23W
70W
100W
135W
Lumen Bright Mode
410lm
680lm
810lm
1600lm
2400lm
3200lm
Lumen Dim Mode
120lm
200lm
270lm
800lm
1200lm
1600lm
10hrs (bright)
30hrs (dim)
10hrs (bright)
30hrs (dim)
Working Time
* Pole not included
20-40W - Split Module
• Low cost installation - no cabling
• PIR Sensor
• c/w Lithium battery in body
• Luminosity is increased when a person is
detected by PIR Sensor
8hrs (bright)
24hrs (dim)
8hrs (bright) 10hrs (bright) 10hrs (bright)
24hrs (dim) 30hrs (dim)
30hrs (dim)
Installation Height
2.5-3m
3-4m
3-5m
5-8m
8-10m
8-10m
Dist. btwn.Poles
8-10m
10-15m
13-18m
20m
25m
25m
LUX
8.6lux @3m 9.4lux @ 4m 7.9lux @ 5m 9.2lux @ 20m 8.9lux @ 25m 8.9lux @ 25m
Size - LxWxD
568 x 306 x
56mm
688 x 306 x
56mm
SOLAR GARDEN LIGHTING
818 x 306 x
56mm
892 x 817 x
228mm
892 x 817 x
228mm
1252 x 817 x
228mm
STREET LIGHTING
Accessories
Solar garden lights are self contained units for parks, complex’s
and housing developments.
SOL-10/24
These lights are easy to install
and low to no maintenance is
required.
These systems are complete kits.
• Maintenance free
• Sealed battery c/w Battery Box
BAT-BOX1
LU56W-24VDC
Code
LIT
Description
Code
LM-TT011
LM-TT012
Light Led
Solar Panel
Controller
Battery
Pole Height
Battery Life
15W
40W/18V
12V/5A
50AH/12V
3M
8hrs
12W *2
70W/18V
12V/5A
80Ah/12V
3M
8hrs
10A/ 24V controller
LED light 24VDC, cool
LU56W-24VDC
white(5500K) 28LUX @ 8m IP65.
Spigot size 60mmØ
Battery Box for 2 x 80AH/12V
BAT-BOX1
batteries + solar controller
Size: 560 x 410 x 250mm
This controller has an advanced light-control function with
an incorporated daylight switch.
SOL
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
SOL-10/24
29
ly
SOLAR STREET LAMPS IP65
6m
nd
Eco-F
rie
6m
6m
SOL
Code
SL-30W
Light Source
Luminous flux
Colour Temp
Housing material
Solar Panels
Battery
Controller
12V 30W LED Lamp
2700lm
6500K (Daylight)
Tempered glass and Die-cast Aluminium
40W*2pcs Mono Crystalline
AGM 12V 65AH
12V 10A - PWM charging mode
Protection against over charge/discharge,
Overload & short circuit
Integrated day/night switching
Battery Box
Pole
Working time
Max endurance
PP Plastic
6M, steel, hot dip galvanised
8hrs per day
3 consecutive rainy days
SL-60W
SL-90W
24V 60W LED Lamp
5400lm
6500K (Daylight)
Tempered glass and Die-cast Aluminium
80W*2pcs Mono Crystalline
AGM 12V 65AH x 2pcs
12V 10A - PWM charging mode
Protection against over charge/discharge,
Overload & short circuit
Integrated day/night switching
PP Plastic
6M, steel, hot dip galvanised
8hrs per day
3 consecutive rainy days
24V 90W LED Lamp
8100lm
6500K (Daylight)
Tempered glass and Die-cast Aluminium
120W*2pcs Mono Crystalline
AGM 12V 100AH x 2pcs
24V 10A - PWM charging mode
Protection against over charge/discharge, Overload &
short circuit
Integrated day/night switching
PP Plastic
6M, steel, hot dip galvanised
8hrs per day
3 consecutive rainy days
Components
p
included:
Code
JYSL-8003-AD50
JYSL-8003-AS65
JYSL-8003-DS40
Complete with solar panel, battery and controller.
Many different styles are available with various lighting options and battery configurations.
Please contact our sales team with your requirements for further information.
30
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
SOL
JYSL-8003-FS15
nd
ly
SOLAR STREET LAMPS
Eco-F
rie
c/w Built-in
day/night
switching
function
SOL
Code
Height
Light Source
Luminous Flux
Solar Panel
Battery
Post
Working Time
Endurance
SGL-A-3501
4m
12V 9W LED Lamp
550±50lm
35W Mono Crystalline
12V40AH AGM Battery
Galvanised steel with plastic
spray treatment
10hrs per day
4 consecutive rainy days
SGL-A-3502
SGL-A-3505
SGL-B-4001
SDGG307
4m
4m
12V 9W LED Lamp
550±50lm
35W Mono Crystalline
12V40AH AGM Battery
4m
2pcs 12V 9W LED Lamp
700±70lm
40W Mono Crystalline
12V40AH AGM Battery
2.2m
12V 1.2W LED Lamp
80lm
3.5W Mono Crystalline
3.2V 6Ah Lithium
12V 9W LED Lamp
550±50lm
35W Mono Crystalline
12V40AH AGM Battery
Galvanised steel with plastic Galvanised steel with plastic Galvanised steel with plastic
spray treatment
spray treatment
spray treatment
10hrs per day
10hrs per day
10hrs per day
4 consecutive rainy days
4 consecutive rainy days
4 consecutive rainy days
Glass Fibre reinforced
plastic pole
8hrs per day
5 consecutive rainy days
SOLAR GARDEN LAMPS
Plastic Series
• Batteries Included
• Height does not
include spike
Code IP44
Size (mm)
Type
Batteries:
RW-SF-03-8
RW-SF-03-2
RW-SF-02-1
RW-SF-03-4
220H x 115Ø
1 x LED
1 x NiMh 600mAh
310H x 120Ø
1 x LED
1 x NiMh 600mAh
420H x 138Ø
1 x LED
1 x NiMh 600mAh
200H x 115Ø
1 x LED
1 x NiMh 600mAh
RW-SLS004
E2009
RW-SLS001
RW-SLS002
260H x 115Ø
1 x LED
1 x NiMh 600mAh
200H x 150Ø
1 x LED
1 x NiMh 600mAh
420H x 150Ø
1 x LED
1 x NiMh 600mAh
420H x 115 x 175
1 x LED
1 x NiMh 600mAh
Stainless Steel
Series
• Batteries Included
• Height does not
include spike
Code IP44
Size (mm)
Type
Batteries
Replacement
Batteries - Ni-MH
Stainless Steel
Series
• Batteries Included
• Height does not
include spike
Code IP44
Size (mm)
Type
Batteries
BC1
RW-SLS003
SDBX115
290H x 125Ø
1 x LED
1 x NiMh 600mAh
420H x 170Ø
1 x LED
1 x NiMh 600mAh
LIT
AA (1.2V)
Type
Code N1800AA (1800mAh)
N2300AA (2300mAh)
N2500AA (2500mAh)
N2800AA (2800mAh)
AAA (1.2V)
N750AAA (750mAh)
N800AAA (800mAh)
N1000AAA (1000mAh)
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
31
SOLAR GARDEN LIGHTS
Aluminium
Paving Lamp
Stainless Steel
In-ground Series
Batteries Included
** battery life: 3 years
Code IP44
RW2LED-120
RW3LED-120
RW-SLR001
Size (mm)
Type
Batteries
120Ø x 35D
2 x white LED
1 x NiMh 600mA
120Ø x 35D
3 x white LED
2 x NiMh 600mA
120Ø x 35D
1 x LED
1 x NiMh 600mA
Spot Lamps
Floating Lamps
Code IP67
Size (mm)
Material
Type
Batteries
RW-SLB003
RW-SLB002
RW-SLP006
120Ø
Plastic
2 x LED
1 x NiMh 600mA
160Ø
Plastic
2 x LED
1 x NiMh 600mA
160D x 85W x 330H
Plastic
1 x LED
1 x NiMh 600mA
Stainless Steel
In-ground Series
Batteries Included
** battery life: 3 years
SDDM002
Code IP44
Size (mm)
Type
Batteries
SDDM002-2
125 x 125
4pcs Superbright white LED
125 x 125
RGB colour changing
NiMh 600mAh
NiMh 600mAh
DC ENERGY SAVING LAMPS
DC Lamps 8000 Hours Life
E27-Type
FE1
FE1-7-E27**
FE1-9-E27**
FE1-11-E27**
L
FE27
Length (mm)
Lumen
FE1-7-B22**
FE1-9-B22**
FE1-11-B22**
7W
9W
11W
124
136
146
238lm
367lm
449lm
FE27-15-B22**
FE27-20-B22**
15W
20W
139
164
701lm
935lm
* Supply Voltage: 12VDC, 24VDC, 48VDC
*Add “-CW” for cool white or “-WW” for warm white at end of code. eg. FE27-15-E27-CW
–
–
–
–
L
Watts
*Supply Voltage: 12VDC, 24VDC, 48VDC
*Add “-CW” for cool white or “-WW” for warm white at end of code. eg. FE1-7-E27-CW
FE27-15-E27**
FE27-20-E27**
FE36
Code
FE36-5-B22-WW*
FE36-7-B22-WW*
FE36-9-B22-WW*
FE36-11-B22-WW*
5W
7W
9W
11W
108
108
117
136
180lm
270lm
400lm
500lm
9W
140
367lm
*Supply Voltage: 12VDC, 24VDC
DC Lamps 15 000 Hours Life
L
CFI-9-E27-12VDC –
12VDC LED Flood Lights
Code
Power
Lumen
Size
FL1-DC-*-12VDC
FL3-DC-20W-*-12VDC
FL3-DC-30W-*-12VDC
10W
20W
30W
100lm/W
100lm/W
100lm/W
115 x 86 x 86
225 x 185 x 160
225 x 185 x 160
* Add colour to code: ● CW (Cool White), ● WW (Warm White)
32
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
LIT
LED ROAD LIGHTING
Solar Powered Road-Side Warning Lights
Code
Battery
LED qty
Flash Rate
Size (mm)
Pole mount
Ø 26mm
Double Sided
Single Sided
RH-4803-Y
RH-4804-Y
RH-4603-Y
1.2V/1800mAh (Ni-Cd)
1.5V/1200mAh (Ni-Cd)
6 (10mm)
2 pc (8mm) x 2
150 Flashes/min
65 Flashes/min
Ø115 x 65 x 166
326 x 163 x 29
Yellow (other colours on request)
1.5V/1200mAh (Ni-Cd)
2 pc (8mm)
65 Flashes/min
326 x 163 x 29
Colour
SSL-CL9-*-**
H-931-Y
2V/2.5Ah (Lead-Acid)
8 x 1 (5mm)
120 Flashes/min
Ø386 x 100
Solar Warning Light IP67 - Size: Ø166 x 155H
Solar Powered LED warning Beacons IP65
Code
Pole mount
Ø 50mm
SSL-CL9-ST
5.5V/100mA Mono Crystalline Silicone
Solar Panel
For mounting to
3.6V/1400mAh
Battery
Traffic Cone
±600m
Visibility
or Traffic Pole
5 Lumens (2200mcd)
Effective Light
109 x 90mm
Size
*Add colour to code: ● Y (Yellow), ● R (Red), ● BL (Blue), ● W (White)
**Add operating mode to code: C=Constant On, F=Flash, R=Resolve
Code
DWS301-*
DWS302-*
Type
Night Visibility
Max Power
Effective Light Candela (cd)
Code
XHL-C6009-2-*-†
XHL-C6009-1-*-†
6V/ 10Ah (Lead-Acid)
6V/ 20Ah (lead-Acid)
Battery
33 (5mm)
60 (5mm)
LED qty
60 Flashes/ min
60 Flashes/ min (flowing)
Flash Rate
750 x 600 x 60
1600 x 480 x 60
Size (mm)
*Add LED colour to code: ● Y (Yellow), ● R (Red) †Add arrow direction: L (Left), R (Red)
Steady On
Flashing
4.3km
4.3 - 6.3km
1.1 watt
1.1 watt
Red
5.0-7.5 cd
8.0-12.0 cd
Amber 7.5-10.0 cd
12.0-16.0 cd
Blue
3.0-4.0 cd
5.4-7.2 cd
Green 6.5-7.5 cd
10.4-12.0 cd
White 7.5-10.0 cd
12.0-16.0 cd
Battery (Nickel-Hydrogen)
5.0Ah NiH2
5.0Ah NiH2
Operating Time
120 hrs
300 hrs
*Add colour to code: ● R (Red), ● A (Amber), ● BL (Blue),
● GN (Green), ● W (White)
SOLAR ROAD LIGHTS
Code
Solar cell
Power
Current
Voltage
Storage component
Category
Capacity
Voltage
Colour
Lighting Mode
Working Time after full charge
Size
Average life
TEA-1B02-BH
TEA-1B03*-BH
TEA-1B03C-BH
TEA-1E10A-BH
2250mWp
400mA
5.5V
350mWp
85mA
4.0V
400mWp
100mA
4.0V
500mWp
125mA
4.0V
NiMh Battery
8000mAh
3.6V
Amber
Fast Flash ± 75/min
80h
650 x Ø98 x 240H
4 Years
NiMh Battery
800mAh
2.4V
White
Steady On
80h
250L x 78H x 50D
4 Years
NiMh Battery
1200mAh
2.4V
White
Steady On
80h
250L x 78H x 50D
4 Years
NiMh Battery
1200mAh
2.4V
Amber
Fast Flash ± 60/min
30h
Ø103 x 150H
4 Years
*Add to code: A for right LED display; B for left LED display
ALL
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
33
LINE INTERACTIVE UPS
Line-Interactive Modified Sine Wave UPS - Compact. C/W battery
Code
Watts VA
D-650
D-800
D-1000
D-1200
D-1500
UPS-1700D
UPS-2200D
390W
480W
600W
720W
900W
1200W
1320W
Size (mm)
Standby Time No. of batteries
145 x 320 x 65
145 x 320 x 65
165 x 370 x 140
165 x 370 x 140
165 x 370 x 140
165 x 370 x 140
165 x 370 x 140
650VA
800VA
600VA
1200VA
1500VA
1700VA
2200VA
5-10min
5-10min
5-10min
5-10min
5-10min
5-10min
5-10min
1
1
2
2
2
3
3
Line-Interactive Pure Sine Wave UPS - Units have built-in battery
Standby Standby
Code
Watts kVA Size (mm)
Time Full Time Half
Load
Load
KI1000
KI2000
KI3000
700 W
1400 W
2000 W
1KVA
2KVA
3 KVA
156 x 450 x 220
198 x 525 x 347
198 x 525 x 347
6min
6min
6min
10min
10min
10min
• Software CD (included)
• AVR Function. Auto voltage regulator
• Over charge/discharge protection.
• Overload and circuit protection.
• LCD Display.
• Full load backup time 4mins.
• Half load backup time 16mins.
• Wide input voltage range: 140-275VAC
• Output voltage: 230VAC ± 10%.
• Spare batteries 12V/7AH SY1270
DC
Voltage
24
48
72
• Wide Input Voltage: 150-300 VAC
• Output voltage: 220/240 ±2%
Application
KI Series
• Commercial Facility
• Hub and Network device
• Point of Sale
• Router
• Data Centre
• Computer Room
• Digital Technology
• Intelligent battery Charger
• User - Friendly LCD Display
• Reliable online interactive design
• Fully Functional Protection
• Intelligent RS232
Communication Port
• Low Battery, Overload ,
short-circuit and over
temperature
• Wide Input Voltage:
150-300 VAC
• Output voltage:
220/240 + /- 2 %
SERVER COMPACT UPS
Online Compact Server UPS 1 phase - Without transformer. Units have built-in battery
• Output isolation transformer
Standby Standby DC
• Wide input voltage range
Code
Watts kVA Size (mm)
Time Full Time Half Voltage • Full protection function
Load
Load
KRJ Series
KR1000-J 700W
KR2000-J 1400W
KR3000-J 2100W
KR6000-J 4200W
Application
1KVA
2KVA
3 KVA
6 KVA
440 x 500 x 2U
440 x 500 x 2U
440 x 500 x 2U
440 x 600 x 3U
6min
5min
5min
5min
15min
15min
15min
15min
36
72
96
192
• Rack Device
• Data Centre
• Point of Sale • Precision Instrument
• Computer Room • Hub and Network device • Router
• Commercial Facility Point
For Extended Operating Time please see UPS External Battery Cabinets on Page 31
• High reliability and performance
• Intelligent RS232
Communication Port
• UPS management software
(optional)
• External battery bank (optional)
• SNMP adapter or USB (optional)
• Wide Input Voltage: 165-275VAC
• Output voltage: 220/240 + /- 2 %
ONLINE UPS
Pure Sine Wave UPS - Single phase 230V/230VAC. Without transformer. Units have built-in battery.
• Output isolation transformer
Standby Standby DC
Code
Watts kVA Size (mm)
Time Full Time Half Voltage • Wide input voltage range
Load
Load
• Full protection function
KR1000 LCD 700W
KR2000 LCD 1400W
KR3000 LCD 2100W
KR6000 LCD 4200W
KR1110S 7000W
Application
KR Series
KR31 Series
34
1 KVA
2 KVA
3 KVA
6 KVA
10 KVA
156 x 400 x 220
198 x 490 x 347
198 x 490 x 347
255 x 640 x 700
255 x 640 x 700
6 min
5 min
5 min
5 min
5 min
15min
15min
15min
15min
15min
• IT Device
• Telecommunication
• Industry
• Data Centre
• Commercial Facility
For Extended Operating Time please see UPS External Battery Cabinets on Page 31
36
72
96
192
192
• High reliability and performance
• Intelligent RS232
Communication Port
• UPS management software
(optional)
• External battery bank (optional)
• SNMP adapter or USB (optional)
• Wide Input Voltage: 165-275VAC
• Output voltage: 220/240 + /- 2 %
Pure Sine Wave UPS - Three Phase (IN) to Single Phase (OUT) Without transformer. Unit only uses external standby battery
connection in Battery Cabinet. 400VAC 3 Phase +N/ 230VAC Single Phase.
• IGBT inverter & output isolation
transformer
DC
Standby
Code
Watts kVA Size (mm)
•
High reliability DSP control
Voltage
Time
• Wide input voltage range
7000W 10 KVA 255 x 640 x 700 See table for UPS BCP
192
KR3110
• DC cold start function
10.5KW 15 KVA 255 x 740 x 785 See table for UPS BCP
240
KR3115
• Full protection function
16KW
20 KVA 255 x 740 x 785 See table for UPS BCP
348
KR3120
• Intelligent RS232 /RS485 Com Port
• Intelligent battery monitor system Application
MMBM (optional).
• IT Device
• Telecommunication
• Industry
• Wide Input Voltage : 380 +/-25 % VAC
• Data Centre • Commercial Facility
• Output voltage : 220 +/- 1 %
For Extended Operating Time please see UPS External Battery Cabinets on Page 31.
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
SOL
BC1
ONLINE UPS
Pure Sine Wave UPS - Three Phase (IN) to Three Phase (OUT) Without transformer.
Unit only uses external standby battery connection in battery cabinet.
Battery & Battery Box to be ordered separately.
Code
Watts kVA
KR-3310
KR-3320
KR-3330
KR-3340
KR-3350
KR-3360
8 KW
16 KW
24 KW
32 KW
40 KW
48 KW
Size (mm)
400 x 800 x 1180
400 x 800 x 1180
400 x 800 x 1180
500 x 800 x 1600
500 x 800 x 1600
500 x 800 x 1600
10KVA
20KVA
30KVA
40KVA
50KVA
60KVA
Standby
Time
DC
Voltage
See table for UPS BCP
See table for UPS BCP
See table for UPS BCP
See table for UPS BCP
See table for UPS BCP
See table for UPS BCP
348
348
348
348
348
348
Pure Sine Wave UPS - Three Phase (IN) to Three Phase (OUT) With Isolation Transformer
FR-UK33080
FR-UK33100
FR-UK33120
FR-UK33160
FR-UK33200
Application
64 KW
80 KW
96 KW
128 KW
160 KW
80KVA
100KVA
120KVA
160KVA
200KVA
1200 x 800 x 1600
1200 x 800 x 1600
1200 x 800 x 1600
1200 x 800 x 1600
1800 x 800 x 2000
See table for UPS BCP
See table for UPS BCP
See table for UPS BCP
See table for UPS BCP
See table for UPS BCP
348
348
348
348
348
• Data Centre
• Precision Instrument
• Computer Room
• Intelligent Equipment
Extended Operating Time please see UPS BCP. For standby times, please see below
• IGBT inverter and output isolation
transformer
• 3 phases UPS allow 100%
unbalance load
• Full DSP control, high reliability
and performance
• Wide input voltage range
• DC cold start function
• Advanced battery charging
management
• Intelligent fan speed control
• ECO mode is available
• Intelligent RS232/RS485
Communication Port
• Advanced no-master-slave
parallel technology (included)
• Intelligent battery monitor system
- MMBM-2 (optional)
• Wide Input Voltage: 380/400
+/-20% VAC
• Output voltage: L-N 220/230 +/1%, L - L 380/400 +/- 1%
EXTERNAL BATTERY CABINET
C-Type Battery Cabinet, No Wheels
Product
Model
Layer
Size
1
1
2
3
4
4
4
C-1B
C-2
C-6
C-12
C-20
C-24
C-32
280 x 190 x 220
470 x 390 x 310
420 x 450 x 600
780 x 455 x 900
950 x 455 x 1190
1150 x 455 x 1190
780 x 880 x 1190
A-Type Battery Cabinet, c/w wheels
Product
Model
Layer
Size
BAT-A4
BAT-A8
BAT-A16
BAT-A20
2
2
4
4
420 x 450 x 670
760 x 450 x 770
780 x 455 x 1360
950 x 455 x 1360
Battery Capacity
24AH/17AH
17/24/38/65/100AH
17/24/38/65/100AH
17/24/38/65/100AH
24/38/65/100AH
65AH/100AH
65AH/100AH
Quantity (Panasonic Size )
2/3 PCs
10/6/4/2/2 PCs
20/16/12/6/6 PCs
30/24/12/10 PCs
56/40/20/20 PCs
24 PCs
32 PCs
Battery Capacity
Quantity (Panasonic Size )
17/24/38/65/100AH
17/24/38/65/100AH
24/38/65/100AH
24/38/65/100AH
20/12/8/4/4 PCs
36/20/16/8/8 PCs
32/32/16/16 PCs
40/40/20/20 PCs
EXTERNAL BATTERIES FOR EXTENDED BACK-UP TIME
30 mins
standby
24Ahx3
Power
24Ahx6
24Ahx8
Voltage
24Ahx16
DC
Output
Number 24Ahx16
USB
Output
of
38Ahx29
Batteries 65Ahx29
65Ahx29
100Ahx29
100Ah×29
65Ah×58
100Ah×58
100Ah×87
100Ah×87
100Ah×116
500Ah×174
hr
1 hr standby 2standby
38Ahx3
38Ahx6
38Ahx8
38Ahx16
65Ahx16
100Ahx29
100Ahx20
65Ahx29
100Ah×58
100Ah×58
100Ah×87
100Ah×87
100Ah×116
100Ah×145
500Ah×174
-
65Ahx3
65Ahx6
65Ahx8
65Ahx16
100Ahx16
65Ahx58
65Ahx58
100Ahx58
100Ah×87
100Ah×87
100Ah×116
100Ah×116
100Ah×145
-
4 hrs
standby
8 hrs
standby
UPS
KVA
100Ahx3
100Ahx6
100Ahx8
100Ahx16
100Ahx32
100Ahx87
100Ahx87
100Ahx87
100Ah×116
100Ah×116
-
100Ahx6
65Ahx12
100Ahx16
100Ahx32
100Ahx48
100Ahx80
100Ahx120
-
1 KVA
2 KVA
3 KVA
6 KVA
10 KVA
15 KVA
20 KVA
30 KVA
40 KVA
50 KVA
60 KVA
80 KVA
100 KVA
120 KVA
160 KVA
200 KVA
Series Series size
size KR KR 33-L
31-L
KR1000L-LCD KR2000L-LCD KR3000L-LCD KR6000L- LCD KR-1110
KR3110 KR - 3310
KR3115 KR3120 KR - 3320
KR - 3330
KR - 3340
KR - 3350
KR - 3360
FR-UK33080
FR-UK33100
FR-UK33120
FR-UK33160
FR-UK33200
Series size Series size
KR-L-J
KR-L
KR1000 L-J
KR2000 L-J
KR3000 L-J
KR6000 L- J
-
Larger sizes available on request
BC1
SOL
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
35
STRIJDOM PARK
STRUBENS VALLEY
CENTURION
BLOEMFONTEIN
POLOKWANE
MAPUTO
NELSPRUIT
RUSTENBURG
SOMERSET WEST
Distributors and Franchises throughout Southern Africa
P.O. Box 3812, Edenvale
1610, South Africa
26 Nguni Drive
Longmeadow Estate West
Edenvale, Gauteng
South Africa
[email protected]
Tel: 010 202 3300/087 806 6650
Tel Sales: 010 202 3400/087 806 6660
Tel Technical: 010 202 3500/087 806 6670
Fax: 087 807 5441
www.acdc.co.za
Tel: 011 251 5600
Tel: 011 675 2137
Tel: 012 003 2030
Tel: 051 101 0206
Tel: 015 297 6136
Tel: 00258 217 20636
Tel: 013 752 3797
Tel: 087 150 1354/5
Tel: 087 310 0120
Moving forward to Solar PV Module-Level power optimization
Up to 25% more energy
Cost efficient maintenance
Increased energy yield and faster return on PV
investment through module-level MPPT
Full visibility of system performance and remote
troubleshooting
Constraint free design
SafeDCTM - DC safety
Maximum space utilization with minimum design time
Safety during installation, maintenance, firefighting
and other emergencies
Solution Overview
I
r • I nv
er
t
25
Years
Monitoring Portal
r
te
Warranty
erter • Inver
nv
I
tim
rO
• Inverter •
Inverter
• Power Op
ptimizer •
Optim
iz
• Inverter •
w er
er
Po
25
Years
Warranty
er
erte
nv
Power Optimizer*
izer • Powe
* SolarEdge power optimizers can operate with any inverter.
Third Edition Jan 2013
AC/DC SFC SOLAR
Distributed by:
www.acdc.co.za
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement