M2 6M-1K2 User manual

M2 6M-1K2 User manual
18
Weather Stations
How’s the Weather?
Get used to answering that question, because these monitoring tools will make you
an instant authority on Mother Nature. From basic thermometers to advanced
meteorological measurement equipment, outfit your shack with accurate weather
monitoring gear and “how’s the weather” becomes more than just small talk.
Find all the specs on each weather station at DXEngineering.com.
LST-WS2815UITAL
Weather Forecasting Quick
Reference Cards
This card shows you how to use the
information from your fancy weather
station. It tells you how to interpret
barometric pressure, wind direction,
cloud types and more. Get years of
meteorology lessons on a single card—perfect for weather-watchers, boaters and Hams.
DVI-131
Weather Forecasting Quick Reference Cards (2) ......................... $8.99
Vantage Vue Weather Station
Professional
Weather Stations
Tailored to the enthusiast, these are powerful
and versatile stations. In addition to the
standard measurements, these stations let
you monitor wind direction/speed, wind
chill, dew point and more, depending on the
one you choose. There are stations with solar powered sensors, USB connectivity, storm
warnings and alarms. Many are compatible with La Crosse Technology’s own “Heavy
Weather” software. Data storage is non-volatile and the stations transmit wirelessly at
915 MHz. Find all the specs on each station at DXEngineering.com.
LST-WS-1612AL-IT Backlit Display, Stores 25 Days of Data, Aluminum Trim ... $94.95
LST-WS-2810U-IT Stores 72 Days of Data, USB, Windows Compatible......... $159.95
LST-WS2811SALIT Stores Data, 7.5" Wide Bezel, Windows Compatible ........ $159.95
LST-WS2815UITAL Stores Data, 9.5" Wide Bezel, Windows Compatible ........ $169.95
LST-WS9023UITCBP
Indoor/Outdoor
Thermometers
Affordable and accurate tools to measure
indoor and outdoor temperatures. They
have a wireless outdoor sensor, and can
display temperature and humidity. The
WS9080UITCBP features a self-setting
LST-WS9080UITCBP
Atomic clock.
LST-WS9245UBKIT Thermometer, Clock, Min./Max. Temp. ............................. $14.95
LST-WS9023UITCBP Thermometer, Clock, Min./Max. Temp., Humidity............ $23.95
LST-WS9080UITCBP Thermometer, Clock, Min./Max. Temp., Atomic Time ...... $24.95
LST-306-605
Outdoor Thermometers
These thermometers and sensors are made
to withstand the elements and provide
accurate readings for years. They have large,
easy to read displays and incorporate several
key features. Choose from outdoor standalone units
and indoor units with wireless sensors.
LST-306-605
Window Thermometer, Clock,
Solar Powered, Backlit .....$24.95
LST-WS6020UITCBP Thermometer with Wireless
Sensor, 5.7" x 3.6" .............$24.95
LST-WS6010UITCBP Thermometer with Wireless
Sensor, 6.1" x 5.3" .............$27.95
Indoor Thermometer
Get accurate temperature, time and humidity
readouts in an attractive device. This handy
tool can record minimum and maximum
temperatures, plus there’s a smiley face icon that instantly
tells you how comfortable the conditions are.
LST-302-604B
Indoor Thermometer .........$17.95
Get critical weather details on a sleek LCD
console. The Vantage Vue Weather Station
displays barometric pressure, wind
speed/direction, temperature, wind chill,
rainfall, dew point and more. It uses
a Weather Center function that
records conditions over
the past 25 days.
This solar-powered wireless
sensor uses frequency-hopping
spread spectrum radio technology
to transmit at distances up to 1,000 feet
with updates every 2.5 seconds. The station is
compatible with Vantage Pro2 weather stations, so you can mix-and-match components.
DVI-6250
Vantage Vue Weather Station ................................................... $355.50
Vantage Pro2 Weather Station
Tailored to the serious sky-watcher,
this station uses a wireless,
solar-powered sensor array
to provide precise weather
data. The easy-to-use LCD
controller shows graph readouts
and forecasting icons. As with many of
Davis Instruments’ Weather Stations, the Vantage Pro2 is fully expandable with a variety
of sensors, wireless repeaters and probes. Find them at DXEngineering.com.
The station gives you precise readouts on wind speed/direction, barometric pressure,
temperature, wind chill, relative humidity, rainfall, dew point and more.
DVI-6152
Vantage Pro2 Weather Station.................................................. $535.50
Wind Speed Meters
Perfect for SKYWARN activities, these ultra-accurate
meters let you keep one eye on the wind and the
other on the weather.
The WindScribe uses patented ultrasonic sensor
technology to give you wind speed, highest
positive speed, lowest negative speed and
average wind speeds. The meter can also
determine wind chill. It includes a replaceable
coin cell battery that lasts up to 600 hours, a wrist lanyard and mounting bracket.
Perfect for quick, easy wind measurement, the Wind Wizard is a handheld vane
anemometer with an analog display. It uses a small built-in wind tunnel to show wind
speed without the need for batteries. A lanyard and protective case is included.
Find more wind meters and detailed specs on each, at DXEngineering.com
DVI-276
DVI-281
WindScribe Digital Meter ........................................................... $121.50
Wind Wizard Analog Meter........................................................... $48.59
Mounting Tripod and Pole Kit
Properly mount your Vantage Pro2,
Pro2 Plus, Vantage Vue or other
precision weather sensor equipment.
The Mounting Tripod features tilting feet for use
on uneven terrain (or a sloped roof). Combine the
two included poles for an overall height of around
70 inches. The Pole Kit includes two mounting poles that, when
combined, provide about 37 inches of overall height. The kit comes
with hardware.
For more accessories and replacement components,
please visit DXEngineering.com.
DVI-7716
DVI-7717
Mounting Tripod ....................................$67.50
Mounting Pole Kit ..................................$31.50
1-330-572-3200: Expert Tech Advice 8:30 am to 4:30 pm ET Monday-Friday
Clocks
19
LST-WS-7014CH-IT
LST-WS8117UITOAK
LST-WT-3129B
LST-WT-3102S
LST-WS9049UITAL
LST-WT-8005U-B
Wireless Weather Stations
Depending on the model, these weather
stations allow you to monitor, record
and track several key weather conditions
like temperature, dew point, humidity,
barometric pressure and even rainfall.
From basic measurements to comprehensive forecasts,
these feature-laden weather stations are invaluable tools
for your shack.
LST-WS-7014CH-IT Cherry Trim, Expandable
to 3 Temp. Sensors ...................$34.95
LST-WS-7017U-IT Aluminum Trim, Expandable
to 3 Temp. Sensors ...................$32.95
LST-WS9049UITAL Displays Forecast, Pressure
History, Moon Phase.................$49.95
LST-WT5220UITCBP
Wall Clocks
These large, easy-to-read wall clocks are more than mere timepieces; they display weather
conditions, the date and even moon phases. Available in several styles, they will look great
on almost any wall. Ensure that you’re never late for dinner, your job or wedding day again
by using a wall clock from La Crosse Technology to stay on schedule
LST-WT-3102S
Analog Clock, White Face, Silver Bezel, 10" Diameter............ $19.95
LST-WT-3129B
Analog Clock, White Face, Black Bezel, 10" Diameter............ $29.95
LST-WT-8005U-B
Wall Clock with Inside Temperature and Date........................ $24.95
LST-WT-8100BK
Wall Clock, Rectangular, Inside Temperate and Date ............ $19.95
LST-WS-8115U-S
Atomic Digital Clock with Inside/Outside Temperature......... $24.95
LST-WS-8418AL-IT Atomic Digital Clock with Moon Phase.................................... $31.95
LST-WS8117UITOAK Digital Clock with Calendar, Temperature, Moon Phase ....... $31.95
LST-WT-8112U
Solar Atomic Digital Clock, Temperature, Moon Phase ......... $24.95
LST-WT-8112
Desk Clocks
Keep the time and inside/outside temperature on your desk AND your wall with these
innovative desk clocks. These self-setting atomic clocks have a traditional display, plus
they’ll project the time and temperature onto your wall in stunning color. They feature an
alarm with a snooze button, making them perfect for the bedroom or your shack. An AC
adapter is included.
LST-WT5220UITCBP Desk Clock, Silver Housing .................................................... $34.95
LST-616-146
Desk Clock, Black Housing .................................................... $34.95
Wireless
Rain Center
Find out how much rain you’ve received in the last 24
hours with this easy-to-use tool. It can also display total
cumulative rainfall levels. The display updates every
six seconds and you can configure the alarm to signal
excessive rainfall. The wireless sensor is self-emptying
and durable.
LST-WS9004UITCBP Wireless Rain Center........$28.95
Handheld
Anemometer
Planning for a DXpedition, Field Day
or Hill-Topping? Add accurate weather
monitoring tools to your gear and make
sure you’re ready for Mother Nature.
This Anemometer lets you monitor wind
speed, wind chill and temperature, plus
it’s small enough to fit in your pocket.
LST-EA-3010U
Handheld Anemometer,
Uses CR2032 Lithium Battery....$37.95
Get Your Gear Faster.
If you get your order in by 10 pm ET and the parts are in
stock, DX Engineering will ship it immediately. We carry
thousands of items, that means you’ll get your order as
quickly as possible. If you don’t like to wait, count on us
to get your order out quickly.
LST-WS-8115U-S
Digital Altimeter Watch
Carry an altimeter, thermometer barometer and compass on your wrist! This watch even
lets you take bearing readings and gives you accurate weather forecasts. A full chronograph
mode includes a stopwatch and counting timer, with memory. The watch is water-resistant
to 30 feet and has an electro-luminescent backlight. (Oh, and it tells time, too.)
LST-XG-55
Digital Altimeter Watch ............................................................... $64.95
MFJ-113
MFJ-121B
MFJ-108B
MFJ Desk Clocks
MFJ-133RC
Maintain an accurate log and ensure
that you don’t lose track of time.
Available in 12 and 24 hour formats,
these MFJ clocks have large,
easy-to-read displays.
MFJ-108B Dual Time Zone LCD, Silver Face ........$21.95
MFJ-121B Dual Time Zone LCD, Green Face........$69.95
MFJ-133RC Compact Atomic Dual Time Zone.......$34.95
MFJ-113
LED Desk................................................$19.95
Proven Products, Expert Advice, Same-Day Shipping
24 Hour Wall Clock
Since you’re probably logging on 24 hour time (UTC),
why not have a clock that gives it to you. As an added
bonus, the 12" clock proudly sports the DX Engineering
logo. It runs on a single AA battery (not included).
DXE-WALLCLOCK 24 Hour Wall Clock....................$29.95
Check out page 63 for more DX Engineering branded items.
20
Meters
Daiwa meters deliver high quality at a value price,
making them ideal for both serious contesters and casual
ragchewers alike. The cross-needle meters display SWR,
power output and reflected power. Each meter uses 13.8
Vdc and has SO-239 connectors.
DMN-SX20C
SX20C and SX40C
300 Watt Mobile
Power Meters
CMX-2300
1,500 Watt
Economy Series
HF/VHF Bench Meter
The CN-101 covers 1.8-200 MHz with 15/150/1,500 watt
min./mid./max. power ranges.
DWA-CN-101
1,500 Watt Economy Series
HF/VHF Bench Meter................ $99.95
Comet's CMX-2300 Power Meter offers dual readings
in one unit. The meter displays FWD, REF and SWR
simultaneously. The left meter covers 1.8 to 200 MHz
with a 3,000 watt power max. The right meter covers 140
to 525 MHz with a 200 watt power max.
CMA-CMX-2300
200 Watt Power Meter .............$224.95
These compact meters work well in mobile rigs or shacks
that are short on space. Their cross-needle displays
indicate SWR and power output simultaneously. They both
feature 30/300 watt min./max. power ranges. The SX20C
covers the 3.5-30/50-54/130-150 MHz bands, while the
SX40C covers 144-470 MHz.
DMN-SX20C
SX20C Mobile Power Meter,
HF-VHF ....................................... $89.95
DMN-SX40C
SX40C Mobile Power Meter,
2M-70cm .................................... $79.95
SX100
3,000 Watt
Power Meter
Digital SWR Wattmeter
200 Watt
Economy Series
HF/VHF Bench Meter
The CN-103M covers 140-525 MHz with 20/200 watt
min./max. power ranges.
DWA-CN-103M
200 Watt Economy Series
HF/VHF Bench Meter................ $99.95
This meter’s intuitive bar graph display combines digital
accuracy with the easy readability of an analog meter.
Use this meter to display power, SWR and frequency
simultaneously. There’s also an adjustable alarm to alert
you to dangerous SWR levels. It covers 1.8-54 MHz with
25/250/1,500 watt min./mid./max. power ranges.
MFJ-826B
Digital SWR Wattmeter .......... $179.95
The SX100 measures
both forward/
reflected power and
SWR. It covers 1.6-60
MHz with 30/300/3,000 watt min./mid./max. power ranges.
DMN-SX100
SX100 Power Meter ................. $124.95
SX200 200 Watt
Power Meter
With a 4 watt
minimum of testing
power, this compact
meter is perfect for testing
2M HT or base stations. It covers 1.8-200 MHz with
5/20/200 watt min./mid./max. power ranges.
DMN-SX200
SX200 Power Meter ................... $89.95
2,000 Watt
Professional
Series Bench Meter
The CN-801P covers 1.8-200 MHZ with 20/200/2,000
Watt min./mid./max. power ranges.
DWA-CN-801HP 2,000 Watt Professional
Series Bench Meter ................ $159.95
Giant SWR/Wattmeter
Quit squinting—this meter has a massive 6.5" display.
It also features MFJ’s “TrueActive” circuit to deliver true
peak or average forward/reflected power readings. It
covers 1.8-60 MHz with 20/200/2,000 watt min./mid./
max. power ranges.
MFJ-868B
Giant SWR/Wattmeter ............$149.95
SX400 200 Watt
Power Meter
Designed for VHF and
UHF, this compact
meter is perfect for mobile
or base installations. It covers 140-525 MHz with
5/20/200 watt min./mid./max. power ranges.
DMN-SX400
SX400 Power Meter ................. $109.95
SX600
Dual Power Meter
3,000 Watt
Professional
Series Bench Meter
The CN-801HP3 covers 1.8-200 MHz with 30/300/3,000
Watt min./mid./max. power ranges.
DWA-CN-801HP3 3,000 Watt Professional
Series Bench Meter ................ $189.95
200 Watt Professional Series Bench Meter
The CN-801G covers 900-1300 MHz with 20/200
min./max. power ranges.
DWA-CN-801G
200 Watt Professional Series
Bench Meter .........................$249.95
Flat Mount Mobile SWR/Wattmeter
Designed for easy installation in most vehicles, this
dashboard mount meter covers 1.8-30 MHz. An LED
illuminated cross-needle meter improves visibility, even
at night. It is powered via 9-volt battery or any 12 Vdc
power source. A remote sensor is included.
AME-AWM-35BH Flat Mount Mobile
SWR/Wattmeter ......................$149.95
200 Watt Professional Series Bench Meter
The CN-801V covers 140-525 MHz with 20/200 watt
min./max. power ranges.
DWA-CN-801V
200 Watt Professional Series
Bench Meter .........................$149.95
2,000 Watt Professional Series Bench Meter
The CN-801SII covers 900-2500 MHz with 0.2/200/2,000
watt min./mid./max. power ranges.
DWA-CN-801SII 2,000 Watt Professional Series
Bench Meter .........................$249.95
SX240C
3,000 Watt Dual
Power Meter
The cross-needle
display indicates forward and reflected power simultaneously, while also showing SWR. It covers 1.8-54 MHz plus
140-470 MHz, making it ideal for Amateurs who operate on
HF through 70cm. The SX240C has 3/300/3,000 watt
min./mid./max. power ranges.
DMN-SX240C
SX240C Dual Power Meter...... $299.95
Instantly switch from
metering one of two
directional couplers.
For low-band/VHF rigs
there’s a 1.8-160 MHz coupler and for VHF/UHF rigs,
there’s a 140-525 MHz coupler. Plus, the couplers are
separate, which means you can keep both rigs plugged
in all the time. The SX600 has 5/20/200 watt
min./mid./max. power ranges.
DMN-SX600
SX600 Dual Power Meter ........ $179.95
SX1100 Dual
Power Meter
The ideal meter if
you’re operating on
the 33cm and 23cm
bands. Similar to the
SX600, this meter has two
separate couplers: one covers 1.8-160 MHz while
the other UHF coupler covers 430-1300 MHz. The three
UHF bands are selectable for 430-450, 800-930 and
1240-1300 MHz. The SX1100 has 5/20/200 watt
min./mid./max. power ranges.
DMN-SX-1100
SX1100 Dual Power Meter ...... $209.95
International Shipping is Quick and Easy! See Page 64 for Details
Dummy Loads & Meters
21
PAS-PM2000AM
2,000 Watt Meters
Low Pass Filter
Eliminate harmonic interference problems on the LF-HF
bands. This 50 Ω filter can handle 1,500 watts (cont.) and
5,000 watts (peak) with a negligible insertion loss of just
.2 dB at 29.7 MHz.
BNR-YA-1
Low Pass Filter .........................$129.95
MFJ-267
PAS-PM2000A
These meters measure and display SWR, forward
power and reflected power simultaneously. You can
also monitor average power, plus a handy “Peak Hold”
button makes it easy to record peak power. Improving
on Palstar’s legendary WM150 meter, the PM2000 series
delivers hyper-accurate active peak readings. The meters
cover 1.8-60 MHz with 300/2,000 watt min./max. power
ranges.
The PM2000AM Meter is similar to the PM2000A, only it is
more compact and includes a mounting bracket for easy
mobile installation.
PAS-PM2000A
2,000 Watt Meter ..................... $179.95
PAS-PM2000AM Mobile Watt Meter,
2,000 Watts ............................. $179.95
MFJ-264
PAS-DL1500
Air-Cooled
Dummy Load,
1,500 Watts
• 0-500 MHz frequency range
PAS-DL1500
Dummy Load, 1,500 Watts ......$189.95
MFJ-264N
MFJ-260C
PAS-DL2K
Fan-Cooled Dummy Load
and Watt Meter, 2,000 Watts
• 0-30 MHz frequency range
• Built-in watt meter, thermostatically-controlled fan
PAS-DL2K
Dummy Load /Watt Meter.......$379.95
Meter for
Icom IC-7600 Transceiver
Made specifically for Icom’s
IC-7600, this meter has a massive
4.5 inch display for easy visibility. It
can indicate signal strength, power out, PA
current, SWR, ALC level, compression or supply
voltages. You can even configure this meter to work
with the virtual meter on your radio to simultaneously
display a different measurement on each unit.
LDG-M-7600
Multi-Function Meter for Icom; $79.95
VEC-DL-2500
MFJ-267
Air-Cooled Dummy Load and
Watt Meter, 1,500 Watts
• SWR under 1.3:1 at 30 MHz
• Built-in watt meter can be
used independently
MFJ-267
Dummy Load /Watt Meter.......$149.95
MFJ-264
Air-Cooled Dummy Load,
1,500 Watts (SO-239)
• SWR under 1.1:1 at 30 MHz and 1.3:1 at 30-650 MHz
MFJ-264
Dummy Load, 1,500 Watts ........ $74.95
MFJ-264N
Air-Cooled Dummy Load,
1,500 Watts (N-Connector)
• SWR under 1.1:1 at 30 MHz and 1.3:1 at 30-650 MHz
MFJ-264N
Dummy Load, 1,500 Watts ........ $84.95
VEC-DL650M
LDG-FTL-METER
Multi-Function Meters
for Yaesu 857/897 Transceiver
Dummy Loads
• Air-Cooled
• 1,500 Watts, 0-650 MHz
• SWR under 1.3:1 at DC-300 MHz,
under 1.5:1 at 300-500 MHz,
under 2.0:1 at 650-1000 MHz
VEC-DL650M
Dummy Load, 1,500 Watts .......$79.95
• Fan-Cooled
• 2,500 Watts, 0-150 MHz
• SWR under 1.31 to 30 MHz
VEC-DL-2500
Dummy Load, 2,500 Watts .....$199.95
LDG-FT-METER
These 7-function meters are the perfect complement
to your Yaesu radio. On the receive end, they’ll display
signal strength, discriminator or voltage. For transmit,
the meters will display RF power, SWR, modulation,
ALC or voltage.
LDG-FTL-METER Multi-Function Meter for Yaesu,
4.5" Display................................$79.95
LDG-FT-METER
Multi-Function Meter for Yaesu,
2.5" Display................................$49.95
MFJ-260C
Air-Cooled Dummy Load, 300 Watts
• SWR under 1.1:1 to 30 MHz and 1.5:1 at 30-650 MHz
MFJ-260C
Dummy Load, 300 Watts ........... $39.95
LDG-M-1000
LDG-M-600
Meters for LDG Remote Antenna Tuners
ADL-1500
Diamond Compact Dummy Loads
DMN-DL30A
DMN-DL30N
AME-ADL-2500
Oil-Filled Dummy Load,
AME-ADL-1500
1,500 Watts
• SWR under 1.2:1 to 30 MHz and low SWR to 400 MHz
• 7 1/2" H x 6 5/8" D
AME-ADL-1500
Dummy Load, 1,500 Watts ........ $69.95
Compact Dummy Load,
15 W Avg./100 W Peak,
DC-500 MHz, PL-259 ..................$39.95
Compact Dummy Load,
15 W Avg./100 W Peak, DC-500 MHz,
Type N Connector .....................$54.95
ADL-2500
Fan-Cooled Dummy Load, 2,500 Watts
• SWR under 1:25:1 below 30 MHz and
under 1.4:1 from 30 to 60 MHz
• 4" H x 8 1/4" D
AME-ADL-2500
Dummy Load, 2,500 Watts ......$209.95
To get accurate metering of your AT100ProII or AT600ProII
Tuners, LDG offers these intuitive multi-function meters.
They can display forward/reflected power and SWR. Each
meter also has peak hold and average power modes. Plus,
if your ProII Tuner is nearby, then you can set these meters
to display a different reading than the tuner’s built-in bar
graph LED, giving you two different meter options.
The M-1000 has 0-100 and 0-1,000 watt power ranges and
is tailored to the AT-1000ProII tuner, while the M-600 has
0-100 and 0-600 watt power ranges and is designed for the
AT-600ProII tuner.
LDG-M-1000
Meter for AT-1000ProII ............$129.95
LDG-M-600
Meter for AT-600ProII ..............$129.95
More Products, Specs and Photos at DXEngineering.com
22
Amplifiers
ALS-600
Solid State
Linear Amplifier
ALS-500M Solid State Mobile Amplifier
• Coverage: 1.5 to 22 MHz
(10-12 meters with optional install kit)
• Power output:
◆ 500 watts PEP
◆ 400 watts CE
• (4) 2SC2879 high power linear RF power transistors
• On/off switch, optional remote on/off control
• DC current meter
• Quiet, thermostatically-controlled low-speed fan
• Instant bandswitching, no tuning required
AME-ALS-500M
Solid State
Mobile Amplifier ......................$789.95
ALS-500RC
Remote Head
• DC current meter
• Remote head for
Ameritron’s ALS-500M,
ALS-600, ALS-600S and ALS-1300
• Operates amplifier’s power and
frequency select switches
• Power, transmit and overload indicator LEDs
AME-ALS-500RC Remote Head ............................$49.95
ALS-500MR Mobile Amplifier and Remote Combo
AME-ALS-500MR Mobile Amplifier
and Remote Combo ...............$849.95
• Coverage: 1.5 to 22 MHz
(10-12 meters with
optional install kit)
• Power output:
◆ 600 watts PEP
◆ 500 watts CE
• (4) rugged TMOS RF power FETs
• Includes 120/220 Vac 50/60 Hz power supply
• Illuminated cross-needle SWR/wattmeter
• Quiet, low-speed, low-volume fan
• Instant bandswitching, no tuning required
• Rugged linear power supply
AME-ALS-600 Solid State Linear Amplifier ....$1,279.95
ALS-600S
Solid State
Linear Amplifier
AME-RJ-7DI
AME-RJ-8DY
AME-RJ-13D
Automatic Bandswitching Radio Interface
Connect this between your Ameritron ALS-Series Solid
State Amplifier and transceiver, and it will automatically
select the right frequency range for your amp based on
the band you’re using. It works with most Icom, Kenwood
and Yaesu transceivers, and there’s a full compliment of
interface cables available for easy hookup.
AME-ARI-500
Automatic Bandswitching
Radio Interface ........................$119.95
ARI-500 Interface Cables—These cables let you connect
your specific transceiver, the ARI-500, to your amplifier.
Part
Number
AME-RJ-7DI
AME-RJ-13D
AME-RJ-DB97DK
AME-RJ-8DY
Radio
Brand
Icom
Icom
Kenwood
Yaesu
Description
Price
7-Pin DIN
13-Pin DIN
DB-9 RS-232
8-Pin DIN
$24.95
$24.95
$24.95
$24.95
• Coverage: all HF bands
(user-modifiable to 10/12 meters)
• Power output:
◆ 600 watts PEP SSB
◆ 500 watts CW
◆ 400 watts RTTY, SSTV, FM and AM
• Tube complement: (3) rugged,
neutralized 811A transmitting tubes
• Two illuminated cross-needle meters
• Transmit LED
• Operate/Standby switch
AME-AL-811
Linear Amplifier ......................... $729.95
AME-AL-811XCE* Linear Amplifier, CE-certified ... $848.95
*Export Only.
• Coverage: 1.5 to 22 MHz
(10-12 meters with
optional install kit)
• Power output:
◆ 600 watts PEP
◆ 500 watts CE
• (4) rugged TMOS RF power FETs
• Includes lightweight switching power supply
• Illuminated cross-needle SWR/wattmeter
• Quiet, low-speed, low-volume fan
• Instant bandswitching, no tuning required
• Lightweight switching power supply
AME-ALS-600S Solid State Linear Amplifier...$1,399.95
ALS-1300 Solid State HF Amplifier
AME-ARI-500
AL-811
Linear Amplifier
• Coverage: 1.5 to 22 MHz
(10-12 meters with optional install kit)
• Power output:
◆ 1,200 watts SSB
• (8) rugged MRF-150 power FETs
• Front panel ALC control
• Illuminated cross-needle SWR/watt meter
• Operate/Standby switch
• Instant bandswitching, no tuning required
• Lightweight switching power supply
AME-ALS-1300 Solid State Linear Amplifier ...$2,395.95
Ameritron Amplifier Modification Kits
Add 10 and 12 meter band coverage to your
Ameritron amplifier. Proof of U.S. Amateur
License is required when purchasing
10 meter modification kits. Be sure to
check your amplifier’s serial number for
modification compatibility before you order.
Part Number
For Amp
Model
Serial
Number
Price
AME-MOD-10M
ALS-500M, 600
12521 & -
$29.95
AME-MOD-10MB
ALS-600, 600S
12522 & + $29.95
AME-MOD-10MK
ALS-1300
Any
$39.95
QSK-5 High
Power Transmit/
Receive Switches
• Electronic PIN diode
switching for fast QSK operation
• Power handling:
◆ 2,500 watts PEP
◆ 2,000 watts CW
◆ 750 watts RTTY/SSTV/FM
• Sure switching prevents hot switching RF power
• AmpSaver feature shuts off tube current between dots
and dashes
AME-QSK-5
Self-Contained QSK-5 High Power
T/R Switch, 120 Vac .................$369.95
AME-QSK-5X
Self-Contained QSK-5 High Power
T/R Switch, 220/240 Vac .........$349.95
AME-QSK-5PC
PC Board Assembly, QSK-5
High Power T/R Switch ...........$279.95
ARB-704
Amplifier/
Transceiver
Interface Buffer
• Protects your expensive radio from damage
• Works with almost any transceiver
• No moving parts, almost instant switching
AME-ARB-704
Interface Buffer .........................$59.95
AME-ARB-704I2 Interface Buffer with Cable
for Icom 7000/760/718 .............$59.95
ARB-704 Interface Cables
These cables let you connect your specific transceiver to
Ameritron’s ARB-704 Interface Buffer. These are plug-andplay configurations that let you safely connect virtually
any modern transceiver to your ARB-704.
Part Number
AME-PNP-7DI
AME-PNP-8DI
AME-PNP-13D
AME-PNP-7D
AME-PNP-8MK
AME-PNP-5M
AME-PNP-8D
AME-PNP-8M
1-330-572-3200: Expert Tech Advice 8:30 am to 4:30 pm ET Monday-Friday
Radio
Icom
Icom
Icom
Kenwood
Kenwood
Yaesu
Yaesu
Yaesu
Description
7-Pin DIN
8-Pin DIN
13-Pin DIN
7-Pin DIN
8-Pin Mini-DIN
5-Pin Mini-DIN
8-Pin DIN
8-Pin Mini-DIN
Price
$17.95
$17.95
$17.95
$17.95
$17.95
$17.95
$17.95
$17.95
Amplifiers
AL-811HD
Linear Amplifier
23
AL-800 Linear Amplifier
• Coverage: all HF bands
(user-modifiable to 10/12 meters)
• Power output:
◆ 800 watts PEP SSB
◆ 600 watts CW, RTTY, SSTV, FM and AM
• Tube complement: (4) 572B transmitting tubes
• Two illuminated meters
• Transmit LED
• Operate/Standby switch
AME-AL-811HD
Linear Amplifier.................... $1,199.95
• Coverage: 160-15 meters
(user-modifiable to 10/12 meters)
• Power output:
◆ 1,250 watts PEP SSB
◆ 850 watts CW
• Tube: (1) 3CX800A7 transmitting tube
• Two illuminated cross-needle meters
• In-rush current protection
• Air cooled with pressurized ventilation
• Multi-voltage power transformer
AME-AL-800
Linear Amplifier................... $2,119.95
AL-1200 Linear Amplifier
• Coverage: 1.8, 3.5, 7, 14, 21 MHz and WARC bands
(user-modifiable to include 28 MHz)
• Power output:
◆ 1,500 watts
◆ 2,500+ watts (PEP two tone for 1/2 hour)
• Tube complement: (1) 3CX1200Z7
• Two illuminated, selectable meters
• Forced air cooling system
• Factory-wired for 240 Vac, 50/60 Hz
• Rectifier diodes rated for 200A
AME-AL-1200
Linear Amplifier...................$3,349.95
AL-811H Linear Amplifier
• Coverage: all HF bands
(user-modifiable to 10/12 meters)
• Power output:
◆ 800 watts PEP SSB
◆ 600 watts CW
◆ 400+ watts RTTY, SSTV, FM and AM
• Tube complement: (4) rugged,
neutralized 811A transmitting tubes
• Two illuminated cross-needle meters
• Transmit LED
• Operate/Standby switch
AME-AL-811H
Linear Amplifier.......................$879.95
AME-AL-811HXCE* Linear Amplifier,
CE-certified ..............................$998.95
AL-800H
Linear Amplifier
• Coverage: 160-15 meters
(user-modifiable to 10/12 meters)
• Power output:
◆ 1,500 watts PEP/CW
• Tube complement: (2) 3CX800A7 transmitting tubes
• Two illuminated cross-needle meters
• In-rush current protection
• Air cooled with pressurized ventilation
• Multi-voltage power transformer
• Operate/Standby switch
AME-AL-800H
Linear Amplifier................... $2,849.95
*Export Only.
AL-1500 Linear Amplifier
• Coverage: 1.8, 3.5, 7, 14, 21 MHz and WARC bands
(user-modifiable to include 28 MHz)
• Power output:
◆ 1,500 watts (1/2 hour continuous carrier)
◆ 2,500 watts (30 second continuous carrier)
• Tube complement: (1) 3CX1500A7/887 Ceramic
• Two illuminated, selectable meters
• In-rush current protection
• Multi-voltage power transformer
• QSK-compatible
AME-AL-1500
Linear Amplifier...................$3,749.95
AL-82 Linear Amplifier
AL-80B
Linear Amplifier
AL-572
Linear Amplifier
• Coverage: all HF bands
(user-modifiable to 10/12 meters)
• Power output:
◆ 1,000 watts PEP SSB
◆ 800 watts CW
◆ 500 watts RTTY, SSTV, FM and AM
• Tube: (1) genuine,
warrantied 3-500ZG transmitting tube
• Two illuminated cross-needle meters
• In-rush current protection
• Multi-voltage power transformer
AME-AL-80B
Linear Amplifier...................$1,399.95
• Coverage: 160-15 meters
(user-modifiable to 10/12 meters)
• Power output:
◆ 1,300 watts PEP
◆ 1,000 watts CW
• Tube complement: (4) 572B transmitting tubes
• Two illuminated cross-needle meters
• In-rush current protection
• Multi-voltage power transformer
• QSK compatible
AME-AL-572
Linear Amplifier................... $1,769.95
Grid Overload
Protection Kit
Guard your expensive tubes against dangerous grid
current. This kit’s fast acting circuit quickly disables the
amp if grid current becomes excessive. If you’re ordering a
new Ameritron Amplifier, this kit can be factory installed,
contact us and we’ll arrange it. The kit is designed for
Ameritron AL-80B, AL-82, AL-811H, AL-572 and AL-1200
amplifiers only.
AME-GOP-100
Grid Overload Protection Kit ...$39.95
ATP-102 Deluxe
Amplifier Tuning Pulser
• Relieves stress on amps,
tuners and dummy loads
during tuning
• Works with any solid state transceiver or transmitter
• Front panel adjustment controls
AME-ATP-102
Deluxe Amplifier
Tuning Pulser ............................$79.95
Proven Products, Expert Advice, Same-Day Shipping
• Coverage: 1.8, 3.5, 7, 14, 21 MHz and WARC bands
(user-modifiable to include 28 MHz)
• Power output:
◆ 1,800 watts continuous
◆ 1,500 watts RTTY, CW (70% plate efficiency)
◆ 1,500 watts PEP, SSB, SSTV (low distortion)
• Tube complement: (2) 3-500ZG transmitting tubes
• Two illuminated, selectable meters
• In-rush current protection
• Factory-wired for 240 Vac, 50/60 Hz
AME-AL-82
Linear Amplifier...................$2,729.95
AME-ICP-120
AME-ICP-240
ICP-120 & ICP-240
In-Rush Current Protectors
• Designed to stop damaging in-rush current
• Protect your tubes from thermal shock
• No complicated wiring, plugs right in to AC
AME-ICP-120
In-Rush Current Protector,
120 Vac .......................................$79.95
AME-ICP-240
In-Rush Current Protector,
240 Vac .......................................$79.95
24
Amplifiers
Exclusively from DX Engineering!
MSQ-2M-1K2-NOPS
Two Meter
1,200 Watt Amplifier
MSQ-6M-1K2
MSQ-6M-1K2-NOPS
Six Meter
1,200 Watt Amplifier
M2 Antennas’ 6M-1K2: excellent performance in a lightweight package. It’s compact
design makes it perfect for Field Day and DXpeditions, and it’s equally at home in
your shack. The standalone unit weighs only 13 pounds, or you can add a built-in 92%
efficient switching power supply and it still only weighs around twenty pounds.
The 1K2 is designed for EME (CW and JT65), SSB, CW or the very popular JT6M for meteor
scatter. Full power output is possible for hours using 50 second transmissions for JT65A.
Eligible for 75 DX Bucks, see inside front cover for details.
MSQ-6M-1K2
6 Meter 1,200 Watt Amplifier with Power Supply ......... $3,299.00
Eligible for 25 DX Bucks, see inside front cover for details.
MSQ-6M-1K2-NOPS 6 Meter 1,200 Watt Amplifier without Power Supply ....... $2,699.00
MSQ-2M-1K2
At the heart of this 2 meter amplifier is single LDMOS FET rated at an incredible 1,250
watts. The 2M-1K2 can handle up to a 65:1 mismatch, and it monitors temperature,
current, VSWR, drive and mode to adjust output.
At just 13 pounds, it is the smallest 1,200 watt amplifier ever offered. You can
order it with a built in, 92% efficient switching supply, and the total weight is still
just 20.5 pounds.
Like its 6 meter counterpart, the 6M-1K2, this lightweight and reliable 2 meter amp is
perfect for portable remote operations or permanent installation in your shack. It is well
suited for EME (CW and JT65), SSB or CW.
Eligible for 75 DX Bucks, see inside front cover for details.
MSQ-2M-1K2
2 Meter 1,200 Watt Amplifier with Power Supply ...........$3,299.00
Eligible for 25 DX Bucks, see inside front cover for details.
MSQ-2M-1K2-NOPS 2 Meter 1,200 Watt Amplifier without Power Supply .....$2,699.00
Shrinks
the Globe.
Faraday did it. So did Hertz. Tesla and Marconi? Absolutely.
Their ideas and breakthroughs brought the world closer together. Now,
DX Engineering is helping you do it too. Blaze new trails, work more bands,
reach out and make new contacts—innovate and communicate.
We’ll make sure you have the gear to make it happen, backed up by the
best support in the industry.
And We Can Prove it:
Blazing-fast Shipping. If you get your in-stock order placed before 10 pm ET
Monday through Friday, we’re putting it on the truck that day. Seriously. That means
you’ll get your order as quickly as possible. We know what
it feels like to be off the air, waiting on a part. That’s why
we ship faster than anyone else.
10 pm ET M-F
International Ordering. No matter what part of the
planet you’re ordering from, we can make sure your
products arrive quickly and correctly. Use our handy
international shipping calculator on DXEngineering.com
to get accurate shipping quotes before you check out.
That way, there are no surprises on your invoice.
Complete information on page 64.
Free Standard Shipping for Orders Over $99*.
If your order, before tax, is over 99 bucks, then
you won’t spend a dime on shipping. (Additional
special handling fees may be incurred for Hazardous
Materials, Truck Freight, International Orders, Next
Day Air, Oversize Shipments, etc.).
Delivering the Big Stuff. Towers are big. Really big.
But you don’t have to worry about the logistics; we’ll
handle all the shipping arrangements. Then we’ll give you an accurate shipping
quote and delivery schedule. DX Engineering has ultra-reliable shipping methods,
even if you’ve ordered huge products.
We’re happy to address any shipping questions
you have. Contact us:
Phone: 800.777.0703 • International: 330.572.3200
• Fax: 330.572.3279
Mail: 1200 Southeast Ave. • Tallmadge, OH 44278
E-Mail: [email protected]
Web: DXEngineering.com
Amplifiers & Preamplifiers
Mirage Amplifiers—Big Power in a Small
Package for Your Base or Mobile Rig!
BD-35 Dual-Band HT Amplifier
• Coverage: 2 meters and 70cm, FM mode
• Power input/output:
◆ 4 watts in/45 watts out (2M)
◆ 4 watts in/35 watts out (70cm)
• Full duplex: talk and listen at the same time
• D-STAR compatible
• Auto band selection, reverse polarity protection
• Works with HTs to 8 watts
• Auto RF-sensing transmit/receive switch
MIR-BD-35
Dual-Band HT Amplifier ........ $189.95
A-1015-G
6 Meter Amplifier
• Coverage: 6 meters
• Power input/output:
◆ 10 watts in/150 watts out
• Low-noise GaAsFET receive preamps offer 20 dB of gain
• Great for mobile or base stations
• Modes: FM/Digital/SSB/CW
• Draws 18-22A at 13.8 Vdc
• Accepts up to 10 watts of input power
• Built-in protection circuits
MIR-A-1015-G
6 Meter Amplifier.................... $349.95
25
A-1015-R 6
Meter Repeater Amplifier
• Coverage: 6 meters
• Power input/output:
◆ 5 watts in/98 watts out
• All mode operation
• Cool-running with rackmount heatsink
• Overheating protection/bypass mode
• Works with RC-1 Remote Control Head
MIR-A-1015-R
6 Meter Repeater Amplifier
(SO-239 Connector) ................$529.95
MIR-B-310-G
B-310-G and
B-320-G HT Amplifiers
MIR-B-320-G
• Coverage: 2 meters
• Power input/output:
◆ 3 watts in/100 watts out (B-310-G)
◆ 3/50 watts in/200/200 watts out (B-320-G)
• Modes: FM/Digital/SSB/CW
• Low-noise GaAsFET receive preamps offer 15 dB of gain
• Draw 15A at 13.8 Vdc
• Fully SWR and reverse polarity protected
• Include cable, rubber feet and warranty
MIR-B-310-G
HT Amplifier.............................$239.95
MIR-B-320-G
HT Amplifier.............................$459.95
D-1010-N and D-3010-N UHF Amplifiers
• Coverage: 70cm band
• Power input/output:
◆ 10 watts in/100 watts out (D-1010-N)
◆ 30 watts in/100 watts out (D-3010-N)
• Modes: FM/Digital/SSB/CW
• Draw 20A at 13.8 Vdc
• Fully SWR and reverse polarity protected
• Cable, rubber feet and warranty included
MIR-D-1010-N
UHF Amplifier ..........................$409.95
MIR-D-3010-N
UHF Amplifier ..........................$379.95
D-1010-NR and D-3010-NR UHF Repeater Amplifiers
• Coverage: 440-450 MHz
• Power input/output:
◆ 4 watts in/80 watts out (D-1010-NR)
◆ 12 watts in/80 watts out (D-3010-NR)
• All mode operation
• Cool-running with rackmount heatsink
• Overheating protection/bypass mode
MIR-D-1010-NR UHF Repeater Amplifier......... $649.95
MIR-D-3010-NR UHF Repeater Amplifier......... $629.95
In-Shack and Mast-Mounted Preamplifiers
• Ultra low-noise GaAsFETs with switchable gain
• Automatic RF switching
• Handle up to 100 watts bypass
• KP-1 series are single unit inline preamplifiers
• KP-2 series use separate RF Line voltage control
and preamp units
MIR-KP-1-10M
In-Shack Preamplifier,
10 Meter ...................................$139.95
MIR-KP-1-6M
In-Shack Preamplifier,
6 Meter .....................................$139.95
MIR-KP-1-2M
In-Shack Preamplifier,
2 Meter .....................................$139.95
MIR-KP-1-220
In-Shack Preamplifier,
220-225 MHz ............................$142.95
MIR-KP-1-440
In-Shack Preamplifier,
430-450 MHz ............................$139.95
MIR-KP-2-10M
Mast-Mounted Preamplifier,
10 Meter ...................................$199.95
Mast-Mounted Preamplifier,
6 Meter .....................................$179.95
Mast-Mounted Preamplifier,
2 Meter .....................................$179.95
Mast-Mounted Preamplifier,
220-225 MHz ............................$179.95
Mast-Mounted Preamplifier,
430-450 MHz ............................$184.95
MIR-B-34-G
B-34 and B-34-G HT Amplifiers
MIR-B-34
• Coverage: 2 meters
• Power input/output:
◆ 2 watts in/35 watts out
• Modes:
◆ FM
◆ CW/FM/SSB
• Low-noise GaAsFET
receive preamp offers 20 dB of gain (B-34-G)
• Heavy-duty heatsink
• Draw 4A at 13.8 Vdc
MIR-B-34
HT Amplifier ..............................$99.95
MIR-B-34-G
HT Amplifier ........................... $119.95
B-1018-G,
B-2518-G and
B-5018-G 2
Meter Amplifiers
• Coverage: 2 meters
• Power input/output: MIR-B-1018-G
◆ 10 watts in/160 watts out (B-1018-G)
◆ 25 watts in/160 watts out (B-2518-G)
◆ 50 watts in/160 watts out (B-5018-G)
• Modes: FM/Digital/SSB/CW
• Low-noise GaAsFET receive preamps offer 20 dB of gain
• Draw 25A at 13.8 Vdc
• Active-Bias for crisp SSB response
MIR-B-1018-G
2 Meter Amplifier.................... $389.95
MIR-B-2518-G
2 Meter Amplifier.................... $339.95
MIR-B-5018-G
2 Meter Amplifier.................... $339.95
D-100-ATVN, D-1010-ATVN and D-1010-ATV-NR
Amateur TV UHF Amplifiers
• Coverage: 70cm band
• Power input/output:
◆ 2 watts in/100 watts out (D-100-ATVN)
◆ 10 watts in/100 watts out (D-1010-ATVN)
◆ 40 watts in/80 watts out (D-1010-ATV-NR)
• Draw 20A at 13.8 Vdc (D-100-ATVN, D-1010-ATVN)
• Draw 15A at 13.8 Vdc (D-1010-ATV-NR)
• Fully SWR and reverse polarity protected
• Cable, rubber feet and warranty included
MIR-D-100-ATVN
ATV UHF Amplifier.................$479.95
MIR-D-1010-ATVN ATV UHF Amplifier.................$469.95
MIR-D-1010ATV-NR ATV UHF
Repeater Amplifier................$629.95
MIR-RC-1
MIR-RC-2
RC-1 and RC-2 Remote Control Heads
• RC-1 compatible with most Mirage Amplifiers
• RC-2 specifically for B-2518-G/B-5018-B
• Preamp on/off
• FM/SSB switch
• Cable included
MIR-RC-1
Remote Control Head...............$49.95
MIR-RC-2
Remote Control Head...............$49.95
World-Class Products Shipped Worldwide
MIR-KP-2-6M
MIR-KP-2-2M
MIR-KP-2-220
MIR-KP-2-440
Antenna Tuners
26
Front
2,500 Watt
Continuous Carrier Tuner
MFJ-993RC
Dual 300/150 Watt
IntelliTuner™
Automatic Antenna Tuner
Back
This tuner lets you rapidly tune any antenna—balanced,
unbalanced or single-wire—automatically. The tuner is a
comprehensive automatic antenna tuning center with SWR/watt meter, antenna switch
for two antennas and a 4:1 current balun for balanced lines. Other features include
a highly efficient switching L-network with wide matching capability, 1.8 to 30 MHz
coverage, cross-needle power meters, backlight LCD display, a port for an accessory
remote control, a radio interface port and heavy-duty 16 amp/1,000-volt relays. The
tuner is rated at 300 watts to match 6 to 1,600 Ω antennas (SWR up to 32:1) or 150 watts
to match wider range of 6 to 3,200 Ω (SWR up to 64:1).
MFJ-993B
Dual 300/150 Watt IntelliTuner™ ........................................ $259.95
MFJ-993RC
IntelliTuner Remote Control ................................................. $39.95
300 Watt Roller Inductor
Antenna Tuner
This tuner’s AirCore Roller
Inductor, gear-driven turns
counter, and spinner knob gives
you exact inductance control
for absolute minimum SWR. You
get the widest matching range,
ultra-high-Q, the lowest loss,
highest efficiency and highest power handling of any roller inductor in ham radio.
Other features include a full size lighted cross-needle SWR/watt meter that reads true
peak forward power, QRM-Free PreTune, eight-position antenna switch, built-in 50 Ω
dummy load and a heavy-duty 4:1 balun, all enclosed in a tough, attractive cabinet.
MFJ-969
300 Watt Roller Inductor Antenna Tuner...........................$199.95
1,500 Watt
Fully Balanced
Antenna Tuner
This is a full legal limit, fully-balanced
antenna tuner. You get superb balance,
very wide matching ranges (12-2,000 Ω)
and continuous 1.8 to 30 MHz coverage
including all WARC bands. It handles a full
1,500 watts SSB and CW. You can tune any balanced lines including
600 Ω open wire line, 450/300 Ω ladder lines and 300/72 Ω twin lead—shielded or
unshielded. You can also tune random wires and coax-fed antennas.
MFJ-976
1,500 Watt Fully Balanced Antenna Tuner ...................... $459.95
1,500 Watt Antenna Tuner
with Dummy Load
This roller inductor tuner is a CW antenna
tuner rated to the US Amateur legal limit of
1,500 watts. It is designed to match 50 Ω
output amplifiers, transmitters, or transceivers
to virtually any antenna. Peak and average
forward power, reflected power, and SWR
are displayed on the illuminated cross-needle
meter. The roller inductor “T” matching network continuously tunes all frequencies
from 1.8 through 30 MHz. You can match dipoles, inverted-vees, verticals, mobile
whips, beams, random wires and many other antenna types. The tuner has rear panel
connectors for coaxial, single wire or two wire feedlines. A built-in 4:1 balun allows the
use of balanced open wire, twinlead or twin-axial feedlines.
MFJ-989D
1,500 Watt Antenna Tuner with Dummy Load ................... $349.95
300 Watt Antenna Tuner
This 300 watt RF output power
antenna tuner will match any
transmitter or transceiver to
virtually any antenna. Peak or
average forward and reflected
power plus SWR can be read on
the illuminated cross-needle
meter. The tuner uses a “T”
matching network and covers all bands between 160 and 10 meters. This network will
tune dipoles, inverted-vees, verticals, mobile whips, beams, random wires and many
other antenna types. The tuner has rear panel connectors for coaxial, single wire or two
wire feedlines. A built-in 4:1 balun allows the use of balanced open wire, twinlead or
twin-axial feedlines.
MFJ-949E
300 Watt Antenna Tuner .......................................................$168.95
This high-power antenna tuner operates at power
levels up to 2,500 watts SSB or CW. It uses an edge
wound roller inductor in a matching “T” network to
continuously tune loads between 1.8 and 30 MHz.
The tuner also features a true peak or average reading
SWR/watt meter. It will match dipoles, inverted-vees,
verticals, mobile whips, beams, random wires and
many other antenna types. There are rear panel
connectors for coaxial and single wire or balanced
feedlines. The balanced feedlines are isolated from the tuner chassis with a fiberglass
panel to reduce capacitive coupling, withstand high voltages and handle high currents.
The tuner is designed to match 50 Ω output amplifiers, transmitters or transceivers to
virtually any antenna with an impedance ranging from 12.5-2,000 Ω on 3.5-30 MHz.
It will match loads ranging from 12.5-800 Ω on 1.8-3.5 MHz. An internal six-position
antenna selector switch selects a built-in 50 Ω dummy load, two coaxial line outputs or
a single wire/balanced line output.
MFJ-9982
2,500 Watt Continuous Carrier Tuner ................................$629.95
HF 1,500 Watt Antenna
Tuner with Watt Meter &
Antenna Switch
This tuner handles 1,500 watts
PEP SSB amplifier input power
(800 watts PEP SSB amplifier
output power)—ideal for use with
Ameritron’s best-selling 800 watt
AL-811H or 600 watt AL-811 amplifiers. The ultra-compact (10.75" W x 4" D x 10.875" H )
tuner features an aluminum-skirted knob set with a weighted deluxe spinner knob and
a scratch-proof, multi-colored Lexan® front panel. Two transmitting tuning capacitors
and MFJ’s exclusive AirCore roller inductor gives you precise control to get your SWR
down to an absolute minimum.
MFJ-962D
HF 1,500 Watt Antenna Tuner with
Watt Meter & Antenna Switch.............................................$279.95
1.8 to 30 MHz Artificial Ground
This artificial RF ground resonates
a random length of wire thrown
along the floor and produces a tuned
counterpoise. This ground effectively
places your rig near actual earth ground
potential even if the rig is on the
second floor or higher with no earth
ground possible. It reduces the electrical
length of the ground connection wire
to virtually zero by tuning out its reactance. The artificial ground connects
between your rig and a random length of wire or a connecting ground wire. It’s tuned for
maximum ground current using the built-in RF ammeter.
MFJ-931
1.8 to 30 MHz Artificial Ground ...............................................$99.95
300 Watt Antenna
Tuner/Artificial Ground
This unit combines a versatile antenna
tuner with an artificial ground. It turns a
random wire into an effective antenna
that works. It’s great for traveling,
emergency use or as a makeshift
antenna. The 300 watt, general purpose antenna tuner covers 1.8 to 30 MHz. It features
a two range, lighted cross-needle meter that lets you read SWR, forward, and reflected
power all at a glance, and a 4:1 balun for balanced lines. You also get an efficient
airwound inductor, a special high-current/voltage 12 position inductor switch and two
1,000-volt air-variable capacitors. It tunes all types of antennas and feedlines including
random wire, coax and balanced lines.
MFJ-934
300 Watt Antenna Tuner/Artificial Ground ......................... $189.95
1,500 Watt IntelliTuner™
This automatic antenna
tuning center has an SWR/
watt meter and an antenna
switch for two antennas. It
lets you rapidly tune almost
any unbalanced or single-wire
antenna automatically. Balanced
feedlines may be used with an external 4:1 balun connected to the tuner’s antenna
output. The tuner features MFJ’s exclusive Amplifier Bypass Control™. It fully protects
your amplifier during tuning and will even take your amplifier off-line if SWR increases
above a user-defined, pre-set limit. The tuner includes a highly-efficient switching
L-network with wide matching capability, 1.8 to 30 MHz coverage, cross-needle power
meters, backlight LCD display, a radio interface port and heavy-duty 16 amp/1,000-volt
relays. It is rated at 1,500 watts SSB/CW and will match impedances from 12 to 1,600 Ω
antennas (SWR up to 32:1).
MFJ-998
1,500 Watt IntelliTuner™ ...................................................... $599.95
International Shipping is Quick and Easy! See Page 64 for Details
Antenna Tuners
HF-AUTO 1,500 Watt
Automatic Antenna Tuner
AT5K 3,500 Watt Antenna Tuner
Palstar is taking the low-power autotuner to the next
level with the HF-AUTO. This unit uses quiet, continuously
variable components to create a perfect antenna match, without noisy relays. It can
tune with a mere 2 watts of power, yet can handle 1,500 watts. The HF-AUTO covers 1.8
through 54 MHz, tunes within 6 seconds and has a large, backlit LCD for easy readout of
RF power, SWR, frequency and more. All the details on this American-made autotuner
can be found at DXEngineering.com.
PAS-HF-AUTO
1,500 Watt Automatic Antenna Tuner.............................$1,494.95
PAS-AT-500 600 Watt Antenna Tuner
This compact manual tuner covers the 160 through
6 meter bands. Controls are easy-to-use and intuitive. Just
like its higher power-rated counterparts, the AT-500 gives
you a six-position switch to select from multiple feedlines
and an external dummy load. It handles 600 watts PEP and
500 watts CW, with an impedance matching range of 20 to
1,500 Ω. A 4:1 ferrite current balun handles the balance line feeder and a 12 Vdc power
connector (with cable) is included.
PAS-AT-500
600 Watt PEP Antenna Tuner ............................................. $479.95
PAS-BT-1500A 1,500 Watt Double-L
Balanced Antenna Tuner
The BT1500A is the ONLY 1,500 watt double-L
network antenna tuner on the market today. With
two tandem mounted ceramic roller inductors, this
tuner offers unparalleled precision. If you’re looking for
a balanced tuner, this is a great high-power solution. The
BT1500A is a highly specialized tuner, so be sure that it suits your
application. Find the complete specs at DXEngineering.com.
PAS-BT1500A
1,500 Watt Double L Balanced Antenna Tuner ................. $724.95
600 Watt IntelliTuner™
Automatic Antenna Tuner
This tuner lets you rapidly tune
any antenna—unbalanced, single-wire or balanced
(with an external balun)—automatically. The tuner
includes a highly efficient switching L-network with
wide matching capability, 1.8 to 30 MHz coverage,
cross-needle power meters, a port for an accessory
remote control a radio interface port and heavy-duty 16 amp/1,000-volt
relays. It is rated at 600 watts PEP SSB and 300 watts CW.
MFJ-994B
600 Watt IntelliTuner™ ........................................................$339.95
3 kW Edge Roller Antenna Tuner
This high power antenna tuner has a
roller inductor “T” matching network
that continuously tunes all frequencies
from 1.8 through 30 MHz. It also features
a built-in 3 kW peak or average detecting
directional power meter. There are rear
panel connectors for coaxial and wire feedlines. A heavy-duty, high-voltage insulated,
current-type balun allows use with balanced feedlines.
AME-ATR-30
3 kW Edge Roller Antenna Tuner........................................ $549.95
Antenna Tuner Cables
The proper link between your tuner and radio is essential:
LDG Electronics makes it easy to create the perfect match with
these interface cables. Don’t see your radio brand listed? There’s
a good chance we have it online at DXEngineering.com.
Part Number
Radio
LDG-IC-PAC
Icom
LDG-IC-PAC-6
Icom
LDG-IC-2000
Icom
LDG-Y-ACC
Yaesu
LDG-IC-KT
LDG-AL-PAC
Kenwood
Alinco
LDG-DC-PWR-CABLE
LDG
27
Notes
AT4K 2,500 Watt Antenna Tuner
The legendary AT4K 2,500 Watt Antenna Tuner
built the Palstar reputation for high quality and
durability. Updated for the 21st century, the
AT4K now has a switchable, dual-movement
active peak and peak hold watt meter. The
selection between unbalanced or balanced
output is relay-switched with a front panel
control on the AT4K.
The AT4K T-matching network uses a 1:1 unbalanced-to-balanced transformer in the
input of the network. When the network is properly tuned, an impedance of 50 Ω is
presented to the input and output of the balun.
• T-match circuit with impedance matching range from 8 to 2,000 Ω
• Custom large value variable capacitors, 460pF at 6 kV
• 10 Amp silver plated ceramic body roller inductor handle-driven crank
• 11-Gauge aluminum chassis, powdercoated on front and top
PAS-AT4K
2,500 Watt Antenna Tuner .................................................. $865.95
AT2KD Differential Antenna Tuner
Palstar’s AT2KD Differential Antenna Tuner is
American-made, with impedance-matching
networks that optimize the performance of
your antenna with your transceiver or SWL
receiver. It offers 160 through 6 meter band
coverage and handle up to 2,000 watts PEP
power. Simply put, the AT2KD is the highest
quality differential-T antenna tuner on the market.
This tuner has two impedance-matching controls with a 6:1 Vernier reduction drive for
capacitor tuning with precision and accuracy. A turns counter-indexed inductor crank
handle makes coarse tuning adjustments easy. Using a T-type circuit configuration
makes adjustments simple because it reduces the number of knobs and eliminates
false peaks. A 12 Vdc power connector and cable are provided for the meter circuit for
each tuner.
• Input tuning: 5 kV dual-stator differential capacitor (430pF/13pF/430pF)
• Inductance: 25 uH roller inductor; 12-gauge wire wound on steatite ceramic core,
silver plated bar/wheel
• Frequency coverage: 1.8-54 MHz
• Power: 2,000 W PEP SSB, 1,500 W single tone
• Impedance range 20 to 1,500 Ω, 1.8-30 MHz lower power for lower Z range
PAS-AT2KD
Differential Antenna Tuner ................................................. $549.95
AT2K 2,000 Watt Antenna Tuner
Price
Works with radios that support AH-3/
AH-4 tuner, 14" long
6' version of IC-PAC Cable
Pressing radio’s tune button changes
mode to CW
Pressing radio’s tune button changes
mode to CW
Normal tuning cycle is about 15 seconds
6' long
Replacement power cable
for any LDG device
Nicknamed the “Rock Crusher,” this
American-made Palstar AT5K 3,500 Watt
Antenna Tuner delivers an impressive 3,500
watts single tone continuous with low losses,
and 5,000 watts PEP performance at certain
impedance ranges. The AT5K tuner offers a wide impedance tuning range from
1.8 through 22 MHz with limited impedance tuning from 22 to 29.5 MHz.
The AT5K tuner provides balanced output with a high power 5,000 watt PTFE cable balun
at the input of the tuner circuit. When the network is properly tuned, a 50 Ω impedance
will be presented to the input and output of the balun for maximum efficiency. This
tuners is designed to handle both balanced line feeds and unbalanced coax feedlines.
• Fan-cooled for extended 100% duty cycle operation
• Full-performance T-match circuit, impedance matching from 8 to 2,000 Ω
• Custom large value variable capacitors, 600pF at 6 kV
• 10 amp silver plated ceramic body roller inductor handle-driven crank
• 11-gauge aluminum chassis, powdercoated on front and top
• Power connector and cable included
PAS-AT5K
3,500 Watt Antenna Tuner ...............................................$1,195.95
$9.95
$11.95
$9.95
$9.95
$11.95
$11.95
$4.95
Building upon Palstar’s impressive AT1500CV
tuner, this AT2K 2,000 Watt Antenna Tuner
features a new, smaller roller inductor, allowing
the AT2K to tune from 160 meters to 6 meters. It
can match dipoles, center fed doublets, Verticals,
end-fed wire, delta loops, beams, Windoms, inverted
vees and many more antenna types.
The AT2K features a 6-position antenna selector switch and Peak/Peak Hold metering
in two ranges, 300 and 3,000 watts. Standing Wave Ratio measurements are displayed
with this illuminated cross-needle meter. Its chassis is made of 11-gauge aluminum with
a powdercoated finish on the front and top cover.
• Impedance range 20 to 1,500 Ω from 160 to 6 meters (assuming resistive load)
• Low minimum custom variable capacitors, 15pF to 400pF at 4.5 kV
• 26 uH 5 kV ceramic body roller inductor with turns counter
• Silver plated inductor wheel shaft and contact wheel
PAS-AT2K
2,000 Watt Antenna Tuner .................................................. $549.95
More Products, Specs and Photos at DXEngineering.com
28
Antenna Tuners
300, 600 and 1,500 Watt
Remote Autotuners
These automatic tuners are mounted in durable, weather
resistant hard-plastic cases for remote outdoor applications.
They cover 1.8 to 30 MHz, use heavy-duty 16 amp/1,000-volt
relays, and feature a highly efficient L-network.
They also include the MFJ-4117 BiasTee
Power Injector to send DC down your coax.
Remote IntelliTuner TM
Automatic Antenna Tuner
Rapidly tune and unbalanced
antenna, single wire or
aluminum vertical, with an
MFJ-927. This tuner has 4
memory banks, each holding
2,500 non-volatile memories. It
uses a high efficiency switching
L-network with wide matching
abilities and is rated at 200 watts SSB/CW.
When you transmit, the tuner automatically adjusts for lowest SWR—it actually learns
and remembers your frequency and tuner settings. You’ll typically be ready to transmit
in less than 5 seconds. This tuner covers 1.8 to 30 MHz, can match antennas from 6
to 1,600 Ω and includes an external bias tee that provides power through the coaxial
cable for remote control capability. It’s also weather protected and suitable for
mounting outdoors. See all the features at DXEngineering.com.
MFJ-927
Remote IntelliTuner Automatic Antenna Tuner ...............$239.95
MFJ-993BRT handles 300 watts SSB/CW power level and matches 6-1,600 Ω antennas
MFJ-994BRT handles 600 watts SSB/CW power level and matches 12-800 Ω antennas
MFJ-998RT handles 1,500 watts SSB/CW power level and matches 12-1,600 Ω antennas
MFJ remote tuners let you quickly tune any antenna, balanced or unbalanced,
automatically. It’s a comprehensive automatic antenna tuner ideal for
Multiband Verticals like the popular 43 foot models.
200 Watt HF Automatic
Remote Antenna Tuner
The tuner is housed in a watertight
enclosure, so you can put it in practically any environment. It will tune any
frequency from 1.8 to 30 MHz. And it’s fast,
with an initial tune of about two seconds and
then tuning from memory in a mere fraction
of a second. There are 200 memory channels
and the tuner handles 200 watts PEP max with
an input minimum of 10 watts. It requires 13.8 Vdc
at 1.5A and includes an MFJ-4117 Bias-Tee power
switch to power the tuner through the coaxial cable.
MFJ-926B
200 Watt HF Automatic Remote Antenna Tuner............... $279.95
200 Watt
MightyMite IntelliTuner™
At just 6.5" x 2.15" x 8.25", the
MightyMite complements today’s
compact HF transceivers like the
IC-706MKIIG, IC-7000, FT- 857D,
DX-70TH and TS-50S. It can also be
used as a stand-alone automatic antenna tuner for any transceiver that has an
output power of 2 to 200 watts SSB/CW from 1.8-30 MHz, with antenna impedances
from 6 to 1,600 Ω.
MFJ-925
200 Watt MightyMite IntelliTuner ....................................... $169.95
200 Watt IntelliTuner™
The IntelliTuner™ lets you
rapidly tune any antenna—unbalanced
or single-wire—automatically. It is a
comprehensive automatic antenna tuning center with a SWR/watt meter and
antenna switch for two antennas. The
tuner includes a highly efficient switching
L-network with wide matching capability,
1.8 to 30 MHz coverage, a radio interface port,
and heavy-duty 10 amp/1,000-volt relays. It is rated at 200 watts SSB/CW.
MFJ-929
200 Watt IntelliTuner ...........................................................$199.95
Interface Cables for MFJ Tuners
MFJ-5114I
MFJ-5114K
MFJ-5114Y
MFJ-5114Y3
MFJ-5114Y4
MFJ-5124I
MFJ-5124K
MFJ-5124Y
Icom Rig Interface Cable for
MFJ-998/929/928/927/925 .................................................... $19.95
Kenwood Rig Interface Cable for
MFJ-998/929/928/927/925 .................................................... $19.95
Yaesu Rig Interface Cable for
MFJ-998/929/928/927/925 .................................................... $19.95
Yaesu FT1000MP Rig Interface
Cable for MFJ-929/998........................................................... $19.95
Yaesu FT2000 Rig Interface Cable for 929/998 .................... $19.95
AutoTuner Radio Interface Cable for Icom .......................... $19.95
AutoTuner Radio Interface Cable
for Kenwood and compatibles ............................................. $59.95
AutoTuner Radio Interface Cable
for Yaesu and compatibles ................................................... $59.95
300 Watt Remote Autotuner
The MFJ-993BRT IntelliTuner™ is a 300 watt remote automatic antenna tuning unit
mounted in a durable hard-plastic case. Measuring just 9.25" W x 3" H x 14.25" D, it
covers 1.8 to 30 MHz, has heavy-duty 16 amp/1,000-volt relays and is a highly efficient
L-network. It also includes the MFJ-4117 BiasTee Power Injector to send DC/RF down
your coax.
It’s intended to be mounted outside at the feedpoint of your antenna, providing a
50 Ω match to your coaxial cable feedline and eliminating additional feedline loss
caused by SWR.
The MFJ-993BRT lets you quickly tune any 6-1,600 Ω antenna, balanced or unbalanced,
automatically.
MFJ-993BRT
300 Watt Remote Autotuner ................................................$299.95
600 Watt Remote Autotuner
The MFJ-994BRT IntelliTuner™ is a 600 watt remote
automatic antenna tuning unit similar is size to
the MFJ-993BRT. At 600 watts, it’s a perfect match
for Ameritron’s solid state ALS-600/S solid state
amplifier and popular tube-type AL-811/H amplifiers.
You can eliminate extra feedline loss caused by SWR by tuning your antenna outdoors
at its feedpoint. This tuner includes the MFJ-4117 BiasTee Power Injector to send DC/RF
down your coax.
The MFJ-994BRT lets you quickly tune any 12-1,600 Ω antenna, balanced or unbalanced,
automatically.
MFJ-994BRT
600 Watt Remote Autotuner ................................................$379.95
1,500 Watt Legal Limit Remote Autotuner
The MFJ-998RT IntelliTuner™ is a comprehensive Full Legal Limit remote automatic
antenna tuning unit. It lets you rapidly tune almost any unbalanced or single-wire
antenna automatically. Balanced feedlines may be used with an MFJ-912 1.5 kW 4:1
balun connected to the MFJ-998RT antenna output.
MFJ’s exclusive InstantRecall™, IntelliTune™ and AdaptiveSearch™ algorithms give you
fast automatic tuning with more than 20,000 non-volatile VirtualAntenna™ memories.
Each of the two antenna banks has four banks of memory; each memory bank has over
2,500 non-volatile memories for tuner settings. The banks allow you to save settings for
several antennas, giving you the flexibility to move your tuner between antennas or to
different locations without losing the old settings.
The tuner includes a highly efficient switched-L network with wide matching capability,
1.8 to 30 MHz coverage, backlit LCD display and heavy-duty 16 amp/1,000-volt relays. It
is rated at 1,500 watts SSB/CW and will match impedances from 12 to 1,600 Ω (SWR up
to 32:1).
It includes the MFJ-4117 BiasTee Power Injector to send DC/RF down your coax.
MFJ-998RT
1,500 Watt Legal Limit Remote Autotuner .........................$739.95
FREE Standard SHIPPING for Orders Over $99, See Page 64 for Details
Antenna Tuners
AH-4
Antenna Tuner
29
These DX Engineering Remote Tuner
Add-On Packages will let you hear
and work the weak ones—just install
them on your vertical antenna and radial
system and start operating!
Icom’s AH-4 antenna tuner lets you automatically tune a 23 foot or longer wire antenna for
portable or mobile HF/50 MHz use. The PTT tune
function makes changing bands easy, too.
ICO-AH-4
Antenna Tuner ..................$299.95
ICO-OPC-136 AH-4 Control Cable, 16.4' ...$32.95
150 Watt Travel Antenna Tuner
Go ahead, hit the beach and work some
DX (just remember to pack this tiny tuner
next to your sunscreen). Covering the 80
through 6 meter bands, the 902B has a wide
enough matching range to handle almost any
antenna. And it’s tough, capable of handling
most transceivers, even at full power. It’s easy
to set up, making it ideal for Field Day or your
mobile rig.
MFJ-902B
150 Watt Travel Antenna Tuner .............................................$99.95
DXE-MBV-ATU-2
Shown with
optional parts
200 Watt Antenna Tuner
It is MFJ’s smallest and most affordable
200 watt tuner, and is still packed with
features, It’s designed to match almost any
transmitter to any antenna including dipoles,
whips, beams—virtually any coax-fed antenna from the 160 through 10 meter bands.
The 12-position switch selects your inductance and, for added versatility for balanced
lines, the tuner has a built-in 4:1 balun.
MFJ-901B
200 Watt Antenna Tuner ........................................................$99.95
DXE-ATU-1
DXE-ATU-2
Mobile Tuner
Imagine never having to fiddle with stop-and-go mobile whip adjustments ever again.
Made specifically for mobile use, this tuner extends your mobile antenna’s bandwidth
while covering 1.8 to 60 MHz, including the 6 meter band. It features an integrated
cross-needle meter that displays SWR and forward/reflected power. The tuner’s
compact size and front-mount controls let it fit nicely into your mobile rig. Since it
handles 300 watts, it’s also handy in your base station.
MFJ-945E
Mobile Tuner ........................................................................ $129.95
Shown with
optional parts
ATU-1 and ATU-2 Remote Tuner Mounting Systems
Dual-Band
VHF Antenna Tuner
This tuner covers the 2M and 1.25M bands and is designed to match a broad
impedance range. It is great for mobile and base stations, allowing you to tune a
low SWR with practically any antenna. The built-in SWR/watt meter can display either
the 30 or 300 watt PEP power range.
MFJ-921
Dual-Band VHF Antenna Tuner .............................................$89.95
These Remote Tuner Mounting Systems provide an easy way to mount your MFJ remote
tuner to your vertical antenna. The DXE-ATU-1 is specifically tailored for mounting the
MFJ-927, while the DXE-ATU-2 is designed for the high power MFJ-998RT.
Both systems mount to your DX Engineering RADP-3 Radial Plate for a secure
connection and feature laser-cut brackets, stainless steel hardware and an insulated
stranded copper feedline cable with ring terminals.
The DXE-MBV-ATU-1 and 2 Add-On Packages are available with or without the
corresponding tuner. Everything is included, so you can get on the air quickly.
Visit DXEngineering.com for more details.
DXE-ATU-1
Remote Tuner Mounting System for MFJ-927 ..................... $89.95
DXE-MBV-ATU-1
Remote Tuner Mounting System with MFJ-927 ................ $493.95
DXE-ATU-2
Remote Tuner Mounting System for MFJ-998RT................. $79.95
DXE-MBV-ATU-2
Remote Tuner Mounting System with MFJ-998RT ............ $819.95
Orders by 10 pm ET Ship Same Day, See 64 for Details
30
Antenna Tuners
LDG Antenna Tuners
KT-100
Automatic
Antenna Tuner
• Works with any AT-300 compatible Kenwood radio
• 125 watts power handling maximum
• 1.8 to 54 MHz frequency range
• 0.1 to 6 second tuning time, 0.1 second memory tune
• Tunes 6 to 1,000 Ω loads (6 to 4,000 Ω with 4:1 balun)
• Optional external balun allows random, long wire
or ladder line fed antennas
• Powered by Kenwood transceiver via included
interface cable
LDG-KT-100..........................................................$199.95
LDG-RT-100
LDG-RC-100
Remote Antenna
Tuner and Console
The solution to lost power
due to standing waves in
your feedline—just install
this near your feedpoint. The tuner is packed with
2,000 memories for instant band switching with
sizzling fast speed and precision. It can tune 4 to
800 Ω loads, and is well suited for dipoles, verticals,
inverted Vs, beams or any coax-fed antenna.
The tuner is powered via your coax, so you’ll
need either a bias-T injector or the optional RC-100
controller. The RC-100 has an integrated DC power
injector, along with an on/off switch and tune button
to control your RT-100 tuner.
LDG-RT-100
Remote Antenna Tuner ..........$199.95
LDG-RC-100
Remote Tuner Console.............$49.95
AT-1000ProII
Automatic
Antenna Tuner
• 1,000 watts power handling maximum
• 1.8 to 54 MHz frequency range
• 2,000 memories for each antenna and auto
configuration storage
• Tunes 6 to 1,000 Ω loads (16 to 150 Ω on 6M)
• 10 second tuning time, 0.2 second memory tuning
• Bar graph LED display shows SWR and selectable
power ranges
LDG-AT1000PROII ...............................................$499.95
Optional Remote Meter for AT-1000ProII
LDG-M-1000 ......................................................... $129.95
YT-450
Automatic
Antenna Tuner
• Tailored to Yaesu FT-450 and FT-950 radios
• 100 watts power handling maximum
• 1.8 to 54 MHz frequency range
• 2,000 memories, sorted by frequency
• Tunes 4 to 1,000 Ω loads (16 to 150 Ω loads on 6M)
• SO-239 in/out connections for dipoles,
verticals, beams, etc.
• Powered from Yaesu radio using supplied
CAT interface cable
LDG-YT-450 ..........................................................$249.95
AT-897Plus Automatic Antenna Tuner
• Tailored to the Yaesu FT-897 radio
• 100 watts power handling maximum
• 1.8 to 54 MHz frequency range
• 1 to 7 second tuning time
• 2,000 memories, sorted by frequency
• Tunes 6 to 800 Ω loads
• Switched L tuning network
• Requires 11 to 14 Vdc at 300mA
LDG-AT-897PLUS .................................................$199.95
IT-100
Automatic
Antenna Tuner
• Works with any AH-3/AH-4 compatible Icom radio
• 125 watt power handling maximum
• 1.85 to 54 MHz frequency range
• 0.1 to 6 second tuning time, 0.1 second memory tune
• Tunes 4 to 800 Ω loads (4 to 3,600 Ω with 4:1 balun)
• Optional external balun allows random, long wire
or ladder line fed antennas
• Powered by Icom transceiver via included cable
LDG-IT-100 ...........................................................$179.95
Z-817 and Z-817H
Automatic Antenna Tuners
• Tailored to the Yaesu FT-817 radio
• Excellent for QRP operation
• 20 watts (75 watts on Z-817H)
power handling maximum
• 1.8 to 54 MHz frequency range
• 2,000 memories, sorted by frequency
• Tunes 6 to 600 Ω loads
• Operates on 4 AA batteries or by radio with
included CAT cable
LDG-Z-817 ............................................................$114.95
LDG-Z-817H .........................................................$159.95
Z-100Plus
Automatic
Antenna Tuner
• 125 watts power handling maximum
• 1.8 to 54 MHz frequency range
• 0.1 second memory tune
• 2,000 memories, sorted by frequency
• Tunes 6 to 800 Ω loads (16 to 150 Ω on 6M)
• SO-239 in/out connections for dipoles,
verticals, beams, etc.
• Requires 7 to 18 Vdc at 100mA maximum
LDG-Z-100PLUS ...................................................$149.95
YT-100
Automatic
Antenna Tuner
• Tailored to certain Yaesu radios
• 100 watts power handling maximum
• 1.8 to 54 MHz frequency range
• 2,000 memories, sorted by frequency
• Tunes 4 to 800 Ω loads (16 to 150 Ω loads on 6M)
• SO-239 in/out connections for dipoles,
verticals, beams, etc.
• Powered from Yaesu radio using supplied CAT
interface cable
LDG-YT-100 ..........................................................$199.95
It is critically important to
ensure that your antenna is
properly matched to your
transceiver. Not only does
improper tuning affect
your ability to transmit
and receive, a poorly tuned
antenna system could
damage your gear. These antenna tuners from
LDG Electronics are an easy way to get some peace of
mind, while maximizing your transceiver’s performance.
Find the complete specs on each one of LDG’s impressive
antenna tuners at DXEngineering.com.
Z-11ProII
Automatic
Antenna Tuner
• 125 watts power
handling maximum
• 1.8 to 54 MHz frequency range
• 0.1 to 6 second tuning time, 0.1 second memory tune
• 4,000 memories with automatic storage
• Tunes 6 to 100 Ω loads (16 to 150 Ω on 6M)
• Can operate using four AA batteries with
user-installed holder
• Requires 6 to 16 Vdc at 300mA maximum,
25uA standby
LDG-Z-11PROII ....................................................$169.95
AT-100ProII
Automatic
Antenna Tuner
• 125 watts power handling maximum
• 1.8 to 54 MHz frequency range
• Two-position switch
• 2,000 memories for each antenna and
auto configuration storage
• Tunes 6 to 1,000 Ω loads (16 to 150 Ω on 6M)
• Matches virtually any coax-fed antenna
• Bar graph LED display shows power, SWR,
mode and status
• Requires 11 to 16 Vdc at 500mA
LDG-AT-100PROII ................................................$199.95
AT-200ProII
Automatic
Antenna Tuner
• 250 watts power handling maximum
• 1.85 to 54 MHz frequency range
• 2-position switch with 8 antenna memories
• 0.5 to 6 second tuning time
• Tunes 6 to 800 Ω loads (6 to 3,600 Ω with 4:1 balun)
• 4,000 memories for instantaneous band switching
• Easy-to-read LED display for RF power, SWR and status
• Requires 11 to 16 Vdc at 750mA
LDG-AT-200PROII ................................................$239.95
AT-600ProII
Automatic
Antenna Tuner
• Tunes 6 to 800 Ω loads
• 600 watts power handling maximum
• 1.85 to 54 MHz frequency range
• Two-position switch with memories for each position
• 0.5 to 6 second tuning time, 0.1 second memory tune
• 4,000 memories for instant band switching
• Bright LED display
• Requires 11 to 16 Vdc at 750mA
LDG-AT-600PROII ................................................$349.95
Optional Remote Meter for AT-600ProII
LDG-M-600 ........................................................... $129.95
FREE Standard SHIPPING for Orders Over $99, See Page 64 for Details
Grounding & Lightning Protection
31
Ground Strap
DX Engineering offers quality tinned copper braid in 5 widths for grounding
applications. It is sold per foot to accommodate almost any project. Very long per-foot
lengths may not be continuous—contact Customer Service to discuss your length
needs if continuous length is required. The strap is available in these sizes:
DXE-TCB-038
3/8" wide x 1/32" thick ...................................................... per foot $0.45
DXE-TCB-050
1/2" wide x .030" thick ...................................................... per foot $0.60
DXE-TCB-063
5/8" wide x .030" thick ...................................................... per foot $0.80
DXE-TCB-075
3/4" wide x .040" thick ...................................................... per foot $1.10
DXE-TCB-100
1" wide x .045" thick ......................................................... per foot $1.25
Ground Braid Assemblies
DX Engineering Ground Strap is available preassembled with lugs
for both #10 and 1/4 inch bolt sizes. A grounding strap is ideal
DXE-TCB10-RT24I
for grounding a rig, amp, etc. to a copper strip running behind
the desk; the strip becomes the central ground point for the
equipment. This central ground can be routed away with
heavy copper strap to join any other similarly protected branches for
single point grounding (SPG) lightning protection.
Other possible uses include noise reduction by grounding a vehicle
DXE-TCB10-RT18I
exhaust, establishing a connection between a radial plate, balun
and a vertical antenna to keep current off of the feedline, and any
grounding application where a reliable connection is needed.
Assemblies with 1/2 Inch Wide Braided Strap Assemblies with 1 Inch Wide Braided Strap
DXE-TCB05-RT01 #10 Ring Lugs, 1' .......$7.95 DXE-TCB10-RT01 1/4" Ring Lugs, 1' .....$8.95
DXE-TCB05-RT03 #10 Ring Lugs, 3' .......$8.95 DXE-TCB10-RT18I 1/4" Ring Lugs, 18"; $9.95
DXE-TCB05-RT05 #10 Ring Lugs, 5' .......$9.95 DXE-TCB10-RT24I 1/4" Ring Lugs, 2' ...$10.95
DXE-TCB05-RT10 #10 Ring Lugs, 10'....$12.95 DXE-TCB10-RT03 1/4" Ring Lugs, 3' ...$11.95
DXE-TCB05-RT18I 1/4" Ring Lugs, 18" ...$8.95 DXE-TCB10-RT05 1/4" Ring Lugs, 5' ...$15.95
DXE-TCB05-RT24I 1/4" Ring Lugs, 2'......$9.95 DXE-TCB10-RT10 1/4" Ring Lugs, 10'; $21.95
DXE-TCB05-RT36I 1/4" Ring Lugs, 3'... $10.95
3/4 Inch Wide Braided Strap
DXE-TCB075-RT18I 1/4" Ring Lugs, 18" ...$8.95
DXE-TCB075-RT24I 1/4" Ring Lugs, 2'......$9.95
DXE-TCB075-RT03 1/4" Ring Lugs, 3'... $10.95
DXE-TCB10-RT03
DXE-TCB05-RT03
Copper Cleaning Kit
Proper preparation of the copper surfaces and application
of copper joint compound prior to bonding is essential to
maintain the low resistance properties of the strap
connection. The copper cleaning kit has everything
needed to establish the bond. The kit includes a
non-abrasive scrub pad, copper joint compound and
complete instructions.
DXE-CCK
Copper Cleaning Kit ...........$19.95
Never-Seez® and Anti-Seize
• Prevents galling and galvanic corrosion
• Protects metal parts against rust, corrosion and seizure
DXE-NSBT8
Never-Seez, 8 oz. brush top ..............$14.95
DXE-NMCBT8
Never-Seez, marine grade,
8 oz. brush top....................................$16.95
UMI-81343
Anti-Seize, 1 oz. squeeze tube ............$3.29
Hazardous, limited to domestic UPS Ground shipping only.
Coaxial Cable
Grounding Brackets
The CGB-Series
Coax Grounding Brackets
are a versatile solution for
additional grounding of
coaxial cable shields. The
stainless steel bracket is
supplied with a stainless steel
V-bolt and hardware in your
choice of two sizes for a solid connection to the tower
leg. Each bracket has holes for use with DXE-363-SST
bulkhead connectors, or chassis mount SO-239
connectors, or DXE-1023 for N connectors.
The Grounding Bracket is an ideal junction point for
the coax pigtails that form the rotor loop to connect to
the downleads. The bracket can also be used at the base
of the tower to provide a solid grounding point before
the coax cable is routed away from the grounded tower.
The bracket has serrated teeth to bite through paint
and corrosion. Additional fasteners are supplied if
you wish to extend a ground braid or copper strap for
secure grounding.
DXE-CGB-200 Coaxial Cable Grounding Bracket,
fits 1" to 2" O.D. tube............$15.95
DXE-CGB-150 Coaxial Cable Grounding Bracket,
fits 1/2" to 1.50" O.D. tube ...$15.95
DXE-363-SST
SO-239, PTFE/Silver, Bulkhead
DXE-363-SST
Connector with SO-239 Socket
Hardware ................................ $6.95
DXE-1023
N Double Female
Bulkhead Adapter ................. $8.95
See pages 105-107 for other connectors.
DXE-1023
ECLS-Series Band Clamps with Stud
The ECLS-Series clamps feature a 3/4 inch long, 10-24
welded stud for easy connection of feed wire, baluns, current
chokes, etc. to tubular elements. Stainless steel hardware included.
Band Clamps with Stud
Pack of 2
DXE-ECLS-050
0.500" O.D. tube..................................................................... $19.95
DXE-ECLS-062
0.625" O.D. tube..................................................................... $19.95
DXE-ECLS-075
0.750" O.D. tube..................................................................... $19.95
DXE-ECLS-087
0.875" O.D. tube..................................................................... $19.95
DXE-ECLS-100
1.000" O.D. tube..................................................................... $17.95
DXE-ECLS-125
1.250" O.D. tube..................................................................... $17.95
DXE-ECLS-150
1.500" O.D. tube..................................................................... $17.95
DXE-ECLS-175
1.750" O.D. tube..................................................................... $17.95
DXE-ECLS-200
2.000" O.D. tube..................................................................... $17.95
DXE-ECLS-225
2.250" O.D. tube..................................................................... $17.95
DXE-ECLS-250
2.500" O.D. tube..................................................................... $17.95
DXE-ECLS-275
2.750" O.D. tube..................................................................... $17.95
DXE-ECLS-300
3.000" O.D. tube..................................................................... $17.95
DXE-ECLS-325
3.250" O.D. tube..................................................................... $17.95
Copper Strap to Tower
Jet-Lube
An absolute must-have when making metal-to-metal connections on
outdoor gear. Jet-Lube SS-30 Pure Copper is both an anti-seize lubricant
and a conductive termination compound. That means it will not only
prevent galling, it will also create a more reliable electrical connection.
XYZ-12555
Jet-Lube, .25 Lb. Can .....................................$13.95
The TK clamp series has a stainless steel plate to go between the
copper strap and galvanized tower leg to prevent corrosion due
to dissimilar metals. For use with tower leg diameters from
5/8 inches to 3.25 inches.
DXE-TK-1
Strap to Tower Leg Ground Clamp, 5/8" to 1.25" ................. $8.95
DXE-TK-2
Strap to Tower Leg Ground Clamp, 1.25" to 2.25"................ $8.95
DXE-TK-3
Strap to Tower Leg Ground Clamp, 2.25" to 3.75"................ $8.95
Copper Anti-Seize
Prevent seizing and galling by applying this to your studs, bolts, flanges
and tubing. It’s safe for copper, brass, iron, plastics and all steel alloys
(including stainless steel).
LCT-37533
Copper Anti-Seize .......................$3.97
NeverWet
This is one of the most innovative products to hit our hobby
since the spark-gap transmitter. This two-step coating system
essentially creates a watertight surface that resists moisture.
Check out some of the demonstrations available on the web
and you can see how useful NeverWet would be around your
shack, antenna farm or mobile rig.
RLL-274232
NeverWet .............................................. $19.97
Exhaust System Grounding Kit
Many modern vehicles have separate fuel injectors
and spark coils for each cylinder. These units can
create substantial pulses on the vehicle wiring. Because the exhaust system is bolted
directly to the engine and supported by insulated mounts, it can be excited just like an
antenna and radiate pulse noise. By using one of our Exhaust Grounding Kits, you may
eliminate that last bit of stubborn noise in your mobile installation. The kit includes a
stainless steel saddle clamp and stainless steel hardware.
DXE-EGK-200
Grounding Kit for 2" Exhaust Pipe ....................................... $24.95
DXE-EGK-225
Grounding Kit for 2.25" Exhaust Pipe .................................. $24.95
DXE-EGK-250
Grounding Kit for 2.5" Exhaust Pipe .................................... $24.95
DXE-EGK-300
Grounding Kit for 3" Exhaust Pipe ....................................... $27.95
More Products, Specs and Photos at DXEngineering.com
32
Grounding & Lightning Protection
Surge Protection Products
A power surge can enter your home through any electrical conductor. Whether it’s
a power grid anomaly or a lightning strike, make sure to protect your gear. Even
independent electrical circuits (a telephone line for instance) share ground paths—
which opens the door for power spikes to enter every electrical device you’ve plugged
in to your home’s AC outlets. To help protect yourself from hazardous voltage spikes,
DX Engineering offers several surge protection options.
IX DC Surge Protector
Utility Enclosure Package
The Utility Enclosure Package is a high-impact thermoplastic enclosure ideal for
outdoor mounting of all types of lightning protectors or other equipment. Its
weathertight design protects the components from rain and direct water spray. It resists
degradation from environmental contaminants, chemical fertilizers and insecticide
sprays that can ruin metallic housings.
The thermoplastic housing and wire entrance grommet material are fire retardant
and UV stabilized. The enclosure can be painted with latex or oil base paints if needed
to blend it in with its location. The kit includes an aluminum mounting plate for
attaching your lightning protectors and ground strap.
Mounting hardware, mounting plate and four weathertight large feed-through
grommets for RG-213 and LMR-400 sized cable are included.
Optional feed-through grommets for smaller cables are available.
DXE-UE-2P
Utility Enclosure Package, 13" W x 14" H x 4" D .................. $54.95
DXE-CFT-1P
Large Cable Feed-Through Grommets, Pack of 6 ................ $15.95
DXE-CFT-2P
Small Cable Feed-Through Grommets, Pack of 6 ................ $15.95
DXE-ATT3G-BRKT
Flange Mounting Brackets
These brackets convert many popular stud-mount lightning
protectors, like Alpha Delta’s Coaxial Surge Protector, to a flange
mount. The conversion makes them easier to mount inside
DX Engineering’s UE-2P Utility Enclosure. Hardware is included.
DXE-ATT3G-BRKT Flange Mounting Bracket,
Straight..................................$4.95
DXE-RCT-BRKT
Flange Mounting Bracket,
Right Angle ............................$6.95
DXE-RCT-BRKT
Originally designed for 2-wire (twisted-pair/POTS) telephone landline trunks, this surge
protector is well suited for DC control circuits and high-speed digital data (up to 25
Mbps) DC lines. It handles us to 48 Vdc lines with a 400 mA maximum holding current,
and has a turn-on voltage of +/- 210 volts.
PPR-IX-1T
DC Surge Protector................................................................ $74.95
ALF-DELTA-C
ALF-DELTA-CIN
Antenna Insulator Kit with Surge Protection
ALF-SEP
This kit contains one center insulator, antenna connection
hardware, one ARC-PLUG static electricity protector and
two end insulators. The antenna hardware is molded of Deltalloy™, an extremely tough
and durable plastic specifically blended to withstand sunlight and extreme weather
conditions. An SO-239 connector is provided for direct connection to your coaxial cable.
A ladder line balanced feedline may be connected directly to the dipole wire ends.
ALF-DELTA-C
Antenna Insulator Kit ............................................................ $29.95
ALF-DELTA-CIN
Replacement End Insulator .................................................... $1.95
ALF-SEP
Replacement ARC-PLUG Protector ...................................... $15.95
Lightning Surge Protector
This unique in-line design is impedance matched
to 75 Ω and virtually transparent to both analog and
bi-directional signals from DC to 1.0 GHz. The patented
and proprietary gas tube construction has an integral failshort
mechanism for a power-cross condition that shunts both your
cable’s center conductor and sheath for a common path to ground.
The protection element resets after each over-voltage incident.
DXE-RLP-75FF
Lightning Surge Protector,
75 Ω, DC Pass, F Connectors ..................................................$13.95
Broadband
Coaxial Lightning Protectors
These 50 Ω, DC-blocked protectors are great for general, single
transmitter use in the 1.5 to 700 MHz frequency ranges. Available with
either a bulkhead or flange mount, Polyphaser’s Lightning Protectors
use a gas tube design that has no DC continuity between the center pins.
Polyphaser’s Multi-Strike products pass all RF frequencies while blocking all
DC—offering excellent protection from voltage spikes.
PPR-IS-50UX-C0
UHF Female, Flange, 2,000 W, 1.5-700 MHz......................... $61.95
PPR-IS-50NX-C0
N Female, Flange, 2,000 W, 1.5-700 MHz ............................. $61.95
PPR-IS-B50LN-C0 N Female, Bulkhead, 2,000 W, 1.5-700 MHz ........................ $65.95
PPR-IS-B50LU-C0 UHF Female, Bulkhead, 2,000 W, 1.5-700 MHz.................... $64.95
PPR-IS-B50HU-C0 UHF Female, Bulkhead, 3,000 W, 1.5-700 MHz.................... $74.95
LT Coaxial
Surge Protector
Don’t live in fear of lightning strikes. This unit is designed to protect your
delicate and expensive equipment from lightning-induced voltage
spikes. It covers frequencies from DC to 30 MHz and handles 200
watts. In-line installation is easy with two SO-239 connectors.
ALF-LT
LT Coaxial Surge Protector ....................................................$29.95
ALF-LT-ARC-PLUG Replacement Arc Plug® for ALF-LT ........................................$17.95
Part Number
Rotor Control Line Protector
This versatile unit protects rotor controllers using up to 8 lines by
preventing lightning strike energy from entering the circuit. You can
mount it to a tower leg or grounding rod using J1 or J2 clamps. This
lightning protector has multi-strike capability and reacts faster than
gas tubes.
• +/- 70 Vdc operating voltage
• +/- 82V turn-on voltage
• 2A maximum operating current
• 6.5kA maximum surge current
• 4 nanosecond turn-on time
• -40° to 185° F temperature range
PPR-IS-RCT
Rotor Control Protector ...................................................... $194.95
DXE-RCT-BRKT
Flange Mounting Bracket, Right Angle .................................. $6.95
Description
Price
Lightning Arrestors
DMN-SP3000
DC-3000 MHz, 200 W Max, Type N Female to Type N Female
$34.95
DMN-SP3000P
DC-3000 MHz, 400 W Max, Type N Female to Type N Male
$41.95
DMN-SP3000W
DC-3000 MHz, Waterproof, Type N Female to Type N Female
$41.95
Lightning Surge Protectors
DMN-SP1000
DC-1000 MHz, 400 W Max, UHF Female to UHF Female
$29.95
DMN-SP1000PW
DC-1000 MHz, 400 W Max, UHF Female to UHF Male
$34.95
World-Class Products Shipped Worldwide
Grounding & Lightning Protection
Flexible
Copper Sheeting
Perfect for making
Faraday shields, or for
fabricating heat sinks, covers, ground busses,
solder tabs and more. The 12" x 12" sheet is 0.022" thick.
GCL-3215
Flexible Copper Sheeting...................................................... $15.95
Copper Strap
A critical part of a low inductance ground system, copper strap’s larger surface area has
lower inductance per foot than equivalent cross-section wire. Use it to tie equipment
back to a common ground point. Copper strap should also be used to make a
non-resonant counterpoise for towers mounted for towers mounted on mountaintops
or other rocky terrain. The copper strap is 2" wide.
Part Number
Thickness
Length
GCL-1120-025
GCL-1120-050
GCL-1120-100
GCL-1220-025
GCL-1220-050
GCL-1220-100
0.012"
0.012"
0.012"
0.022"
0.022"
0.022"
25'
50'
100'
25'
50'
100'
Price
$52.95
$85.95
$154.95
$76.95
$134.95
$249.95
Coax Shield
Ground Kits
These kits provide a low inductance path
for proper ground contact between a round
member made from copper, brass, aluminum,
tin or steel to corresponding copper, brass,
aluminum, tin or steel grounding material. Examples: grounding the coax shield as the
coax leaves the tower or connecting a round tower leg to the ground system. Three kits
are available for various combinations of shield material to grounding material, and they
fit coax shield or tower leg diameters from 1/4 inch to 2 1/8 inches. These kits include a
perforated strap, an adjustable angle, 24 inch long tail strap, weatherproofing kit and all
stainless steel brackets and hardware.
PPR-UNI-KIT-2CC Copper to Copper Ground Kit .............................................. $99.95
PPR-UNI-KIT-2CT Copper to Aluminum Ground Kit ......................................... $99.95
33
Copper
Ground
Rod Clamp Kit
An uncompromising grounding
kit that helps keep your station
safe. Though it is designed to work
specifically with your Alpha Delta ATT
or TT series surge protectors, this system is also compatible with virtually any stud-type
flange-mount coaxial surge protector. You can even connect up to four surge protectors
for extra protection against lightning strikes.
Made of solid copper, this clamp kit includes stainless steel hardware for added
reliability and years of use at your shack.
ALF-UCGC
Copper Ground Rod Clamp Kit............................................. $49.95
Transi-Trap
Broadband Coaxial
Surge Protectors
These gas surge arrestors protect sensitive equipment from the
excessive voltage and current caused by static buildup or a lightning
strike. The 50 Ω DC voltage pass-through design is perfect if you’re
using coaxial cable to carry both RF and DC voltage, like in an antenna switch. These
protectors use a replaceable Arc-Plug™ cartridge that you can change in the field without
tools. They feature a 1/4"-20 mounting stud for easy install.
The Defense Logistics Agency has assigned National Stock Number (NSN) 5920 01
5470278 to the model TT3G50 Coax Surge Protector and NSN 5325 01 5466841 to the
3G50 Arc-Plug cartridge for use in all U.S. Military and NATO applications worldwide.
Part Number
Mount
Connector
ALF-ATT3G50
ALF-ATT3G50HP
ALF-ATT3G50F
ALF-ATT3G50FHP
ALF-ATT3G50U
ALF-ATT3G50UHP
ALF-AT3G50UBXL
ALF-ATT3G50UBHP
ALF-AT3G50UM90
ALF-AT3G50UM90HP
ALF-3G50
ALF-3G50HP
Stud
N-Connector
Stud
N-Connector
Stud
F-Connector
Stud
F-Connector
Stud
SO-239
Stud
SO-239
Bulkhead SO-239
Bulkhead SO-239
90°
SO-239 & PL-259
90°
SO-239 & PL-259
Replacement Arc-Plug
Replacement Arc-Plug
Frequency
3 GHz
3 GHz
3 GHz
3 GHz
500 MHz
500 MHz
500 MHz
500 MHz
500 MHz
500 MHz
Power
Handling
200 Watts
2,000 Watts
200 Watts
2,000 Watts
200 Watts
2,000 Watts
200 Watts
2,000 Watts
200 Watts
2,000 Watts
200 Watts
2,000 Watts
Price
$59.95
$59.95
$59.95
$59.95
$49.95
$49.95
$59.95
$59.95
$62.95
$62.95
$14.95
$14.95
Weatherproofing Kit
Use PolyPhaser’s Weatherproofing Kit PPR-WK-1
when mounting lightning protectors or making
ground connections outdoors. The kit prevents
moisture ingress and easily handles extreme
temperatures, the sun’s UV rays and salt spray.
PPR-WK-1
Weatherproofing Kit ......... $9.95
Copper
Grounding Plate Kit
Copper Strap
to Copper Strap Clamp
The DXE-MSC-3 bonding clamp is ideal for
bonding two copper straps together, for extending
an existing run or to add drops to equipment. It
accepts ground straps from 1.5 to 3 inches and
includes 18-8 stainless steel hardware.
DXE-MSC-3
Multi-Strap Clamp ..............$55.95
The DXE-CU-SPGP provides a convenient means to mount multiple lightning
protectors and tie them to a common ground. The plate is an 18 x 12 inch painted
board with a 15 x 10 x 0.063 inch piece of copper mounted to it. The board should
be mounted to wall studs set on 16 inch centers.
DXE-CU-SPGP
Copper Grounding Plate Kit ............................................... $299.95
Copper Strap to Copper
Ground Rod Clamp
This clamp bonds a 5/8 inch ground rod to copper
strap. 18-8 stainless steel hardware included.
DXE-58R-112S
Strap to Copper
Ground Rod Clamp.............$39.95
Copper Strap to Copper Wire Clamps
Ground Wire to Copper Ground Rods
These wire bonding clamps provide a convenient way to
bond heavy-gauge copper wire to copper grounding straps.
These clamps handle from 6 AWG to 6/0 AWG, depending on
the model. 18-8 stainless steel hardware is included.
DXE-1C-112S
Copper Wire to Strap Bonding Clamp, 6 to 1 AWG ............. $37.95
DXE-10C-112S
Copper Wire to Strap Bonding Clamp, 1/0 to 6/0 AWG ...... $36.95
The DX Engineering J series clamps are used to connect ground wire
to copper ground rods sized from 1/2 inch to 2 1/4 inches. They
accept wire ranging from #2 stranded to #10 solid. These clamps
are made of cast bronze and include 18-8 stainless steel hardware.
DXE-J-1
Wire to Rod Transition Clamp, 1/2" to 1 1/3" ...................... $15.95
DXE-J-2
Wire to Rod Transition Clamp, 1 1/2" to 2 1/4" ................... $22.95
More Products, Specs and Photos at DXEngineering.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement