null  null
SITOP power supply
Top reliability. Top efficiency.
Top integration. SITOP
siemens.com/sitop
2
You can invest a lot
in your power supply.
Or you can profit from it.
An efficient power supply is a basic requirement for operating any plant, no
matter the industry or need. Critical production processes can only be maintained if a constant power supply of the necessary quality is available for the
automation system. SITOP has proven its value in the manufacturing environment over many years, and guarantees a reliable power supply with a complete
and precisely coordinated range of products – especially suited to the growing
demands of our time.
Ensuring a reliable power supply
Boosting productivity
SITOP stands for a high-quality direct-current supply. The
power supply units themselves provide reliable protection
against many types of network faults that can occur even
in the most modern power grids. But there are also external conditions that require additional protective measures, such as fluctuating grid quality to which plant manufacturers operating in global export markets must be
able to respond. Three types of faults must be taken into
account: short power failures lasting a few seconds; longer power failures (blackouts) lasting up to several hours;
and short voltage dips (brownouts) as a result of load fluctuations. SITOP protects against faults on the supply
network and the DC side with special add-on modules,
thereby ensuring the necessary supply reliability.
Improving productivity is an ongoing commitment. All
automation products must be capable of being seamlessly
integrated into the product life cycle management system. SITOP supports operators here with an intuitive
selection tool for the fast selection of both the power supply and an uninterruptible DC power supply. In addition, it
provides you with all mechanical and electrical design
data and product documentation. From the tool, you can
order directly from the Siemens Industry Mall.
Optimizing energy efficiency
Rising energy prices have a direct impact on a company’s
competitiveness. This makes it all the more important to
consistently improve energy efficiency, even for small
loads – for example in the control cabinet. The power supply unit is, in this case, the central power source of the DC
loads, and is where the high efficiency of regulated SITOP
power supply units can offer a significant saving
potential.
SITOP – at the top in every respect
Since Siemens presented the first regulated power supplies at the price of unregulated in 1993, SITOP has
become the world’s best-selling industrial power supply
solution. Our portfolio is the result of 20 years of continuous research, requirement analysis, and ongoing development. Today SITOP is the leading power supply across all
industrial sectors, with a comprehensive range of expansion components for applications of every kind. As an element of the Siemens environmental portfolio, SITOP plays
an important role in increasing sustainability in industry.
3
SITOP –
Reference in
three dimensions
SITOP means top reliability
You think about the best possible power supply at the
time you purchase it – and then you should never have to
think about it again. SITOP has proven its reliability in
more than 10 million applications in virtually all supply
systems in the world. With its flexible, wide-range input,
outstanding load characteristics, and all relevant certifications, the SITOP concept safeguards the availability of
your plant. A host of expansion components compensate
individual disturbance factors like system and voltage
fluctuations, and enable operation even in regions with a
varying quality of supply. Fault-specific overloads in the
output circuits are selectively disconnected so that the
supply to the other loads is maintained.
As a machine and plant manufacturer, you provide your
customers with the basis for extremely reliable production
when you use SITOP. As a plant operator, you are completely protected against production outages and avoid
high follow-up costs as a result. And if a replacement is
ever needed, our global customer service ensures the fastest possible delivery, because all SITOP products can be
supplied from stock.
4
SITOP means top efficiency
SITOP means top integration
Energy costs represent an increasingly large proportion of
production costs. Any company that can save here will
gain a valuable competitive advantage. SITOP makes an
important contribution to energy conservation, because
the primary switched-mode power supply units operate
highly efficiently. For example, the SITOP modular has an
efficiency of up to 95 percent. Losses are low over the
entire load range, even in no-load operation. This is
because in practice, a power supply is rarely operated at
full load.
Integration is productivity. For this reason, SITOP has
always placed emphasis on seamless integration in the
particular production environment. Naturally, the power
supplies are optimally matched to automation systems
like SIMATIC, SINUMERIK, and SIMOTION. All SIMATIC
power supplies are integrated in the TIA portal. This
means that they are part of the Siemens platform across
the entire planning and production processes of your
plant. Selected SITOP devices are also integrated in the
object library of COMOS/Automation Designer, and so
they can be planned, documented, and changed simply by
dragging and dropping. This results in maximum transparency and integration for plant operators. SITOP DC UPS is
designed for simple integration in the PC-based automation system SIMATIC IPC. Status messages can be easily
evaluated by SIMATIC IPC and, in the case of a power failure, the PC with its applications is safely shut down.
But that’s not all – because for us, efficiency is also always
measured against the product life cycle. With the SITOP
selection tool, we make it easier for you to select the
product you need. The product documentation available
from the CAx online configurator, together with the electrical and mechanical design data, supports your planning
process and helps keep costs calculable.
5
What an optimal power supply looks like depends on numerous factors –
size, performance range, and functions, to name but a few. The extensive
range of SITOP products ensures that your power supply will always match
your requirements.
Overview of SITOP
product lines
SITOP lite
SITOP compact
LOGO!Power
SITOP smart
The cost-effective
basic power supply
The slim power supply
for control boxes
The flat power supply
for distribution boards
The powerful standard
power supply
SITOP lite
LOGO!Power
SITOP lite is the power supply series for basic requirements in the industrial environment, offering all the
important functions at a low cost – without compromising
quality and reliability. The wide-range input with manual
switchover supports connection to a wide range of singlephase supply systems.
The miniature power supply units in the LOGO!Power
series can be deployed in a large number of applications
in the lower power range. Their extreme flexibility is
made possible by the units’ diverse output voltages, wide
input voltage range with optional DC operation, and flat,
stepped profile for installation in distribution boards.
SITOP compact
SITOP smart
SITOP compact was developed to be an extremely spacesaving power supply for the lower power range. It is especially suited to distributed applications in control boxes
and in small control cabinets. Its high efficiency over the
entire load range and low no-load loss make it exceptionally efficient. It is ideal for applications that are often in
standby mode.
SITOP smart is the optimal power supply for many 24 V
applications, featuring compact design, powerful performance, and low price. Despite its compact size, it offers
outstanding overload characteristics thanks to the extra
power feature that provides 1.5 times the rated current
for five seconds: Even large loads can be easily switched
on. And with a rated capacity of 120 percent, these slim
power supplies are among the most reliable of their kind.
6
Rated voltages (V DC)
Rated currents (A)
1-phase
Input
DC input
Switchable parallel
Safety
Explosion protection: ATEX or FM
Expandable
Selectivity/diagnostic model
Buffer module
DC UPS
ul
m
P
TO
5
12
15
24
24
24
48
3/6.3
1.9/4.5
1.9/4
1.3/2.5/4
2.5/5/10/20/40
5/10/20/40
10/20
•
•
•
•
•
•
+
+
+
•
+
•
•
•
•
•
•
•
•
•
•
•
+
+
++
+
+
+
+
•
++
•
Approved for shipbuilding: GL or ABS
Redundancy model
SI
SI
24
0.6/1.3/2.5/4
Signaling contact “Output voltage OK”
Ambient temperature range
od
ar
sm
P
TO
G
LO
12
2/6.5
Overload characteristics
General
t
er
ow
!P
O
P
TO
SI
24
2.5/5/10
3-phase
Energy efficiency
ar
ct
pa
m
co
e
lit
P
TO
SI
Output
•
•
•
•
•
•
++
•
•
•
•
•
•
•
•
++
++
++
•
++
•
Selection matrix of SITOP product lines for mounting on top hat rails
SIMATIC Design
SITOP modular
Special designs
The optimal supply for
SIMATIC S7 and more
The technology power supply
for demanding solutions
Equipped for special functions
and conditions
SITOP power supplies in SIMATIC design
SITOP special design for special functions
The design and functionality of the original SIMATIC
power supplies merge into the SPS network. Together
with the SIMATIC systems S7-1200, S7-200, S7-300, and
ET 200pro, they also supply other loads reliably with 24 V.
Restricted installation conditions, harsh environmental
conditions, or special input and output voltages – whatever the special conditions, these standard power supplies
meet even exceptional requirements.
SITOP modular
SITOP modular provides maximum functionality for use in
complex plants and machines. Its wide-range input allows
it to be connected to any supply system in the world and
also guarantees a high level of safety, even in the event of
large voltage fluctuations. The power boost briefly delivers up to three times the rated current: and in the case of
an overload, you can choose between constant current
with automatic restart or latching shutdown. This unit’s
high efficiency keeps the energy consumption and heat
development in the control cabinet down to a low level,
and the compact metal enclosure also saves space.
For example: low-cost 12-V and 24-V power supply units
in rugged aluminium enclosures for direct wall mounting
in various installation positions and power supplies in protection mode IP67. Or power supplies with special functions like battery charging, flexibly adjustable output voltage, and operation in accordance with NEC Class 2.
7
Processes and plants that are critical for a company’s business generally require
additional protection measures. SITOP add-on modules individually protect your
production against many sources of risk.
SITOP add-on modules –
all-round protection à la carte
Add-on modules
Add-on modules for
increasing system availability
Safeguarding against failure through redundancy
Selective protection of 24-V load circuits
Two power supply units can be connected via the SITOP
redundancy module for additional failure safety. If one
unit fails, the other automatically takes over the power
supply function. In this way the power supply is safeguarded in unstable conditions.
The selectivity module SITOP PSE200U is specially tailored
to the characteristics of switched-mode power supplies.
The electronics permit brief current peaks and switch
longer overloads off-circuit, even on long thin cables and
with earth leakages in which the current is limited by high
resistance.
In this case the circuit-breakers do not trip, or they trip too
late, even if the power supply could deliver the current.
The selectivity module reliably disconnects the faulty load
circuits, and the supply to the other loads continues with
absolutely no interruption so that total failure of the plant
can be avoided. The fault is output via a common signaling contact and indicated by an LED on the relevant load
circuit; in this way, the fault can be quickly localized and
downtimes are minimized.
8
Configuration with
redundancy module
Power
supply uni
Redundancy
module
Configuration with
selectivity module
Power
supply unit
Power
supply unit
Selectivity
module
Configuration
with buffer module
SPS
HMI
Actuators
Sensors
SITOP modular
power supply
Buffer
module
DC 24 V
DC 24 V
DC 24 V
Did you know that … by the year 2009, our customers had ordered 10 million SITOP power supply units
Power failures usually last only for fractions of a second –
however, they can cause time- and cost-intensive damage
to sensitive production areas. Used in combination with
SITOP modular power supply units, the buffer module
bridges short-duration voltage dips with its electrolytic
capacitors and reliably preserves interruption-free
operation.
du
Protection against …
Failure of a
power supply unit
Overload in the
24-V circuit
Re
Buffer module bridges brief power failures
n
Se dan
cy
di lec
m
ag tiv
no ity od
ul
Bu st /
e
ic
ff
m
er
m odu
od
DC
l
ul e
w UP
e
ith S
DC ca
p
w UP aci
ith S to
rs
ba
tt
er
ie
s
that they are using worldwide in over 190 countries?
•
•
Power failure in the
seconds range
Power failure up to the
minutes range
Power failure up to the
hours range
•
•
•
•
•
•
SITOP add-on module selection matrix
9
Power outages can bring a plant to a standstill, with high costs in terms of both
time and money. The SITOP DC UPS provides perfect protection against unexpected downtimes and so guarantees uninterrupted plant operation.
An in-house software solution supports ongoing processing of status messages,
safe shutdowns, and correct restarting of your system.
SITOP ensures reliable 24-V supply –
even when the power fails
DC UPS, uninterruptible
DC power supply
Reliable 24-V supply – even when the power fails
SITOP DC UPS with capacitors
For use both inside and outside the control cabinet
These highly-capacitive double-layer capacitors store sufficient energy to shut down PC-based systems safely.
The buffering time of the UPS500S for DIN rail mounting
can be extended by adding expansion modules. The SITOP
UPS500P is designed with IP65 degree of protection and
can be used on a distributed basis, for example, supplied
by power supply unit SITOP PSU300P. The elongated
design of the aluminium enclosure is ideally suited for
mounting on a support arm.
Totally maintenance-free
The capacitors have an extremely long life even at high
ambient temperatures. No maintenance or replacement of
the energy buffer is required, which means that the DC
UPS pays for itself within a short time. And because the
capacitors do not emit any gas, no ventilation of the control cabinet is required. Short recharging times quickly
restore buffering capability following a power failure.
•SITOP UPS500S 15 A, up to 20 KWs
•SITOP UPS500P 7 A, 5/10 KWs with IP65
•Capacitors eliminate replacement of batteries
•Long life even at high temperatures
•No ventilation of the installation site required
10
SITOP DC UPS configuration with capacitors
SITOP
power supply
SITOP
UPS500S
DC 24 V unbuffered
SITOP
UPS501S
SITOP DC UPS configuration with battery modules
SITOP
power
supply
Industrial PC
DC 24 V
unbuffered
DC 24 V buffered
Actuators
(e.g., motor
drives and
valves)
HMI
Distributed peripherals
with sensors
SITOP
DC-USV
Signal
light
24-V buffering for saving process data
and for correct PC shutdown
Battery
module
SPS
Con- Switch Signaling
verter
light
DC 24 V buffered
Actuators
(e.g., motor
drives and
valves)
Motor with
incremental
transducer
Sensors,
(e.g., temperature,
proximity switch)
24-V buffering for maintaining communications, signaling,
sensor-measured values and position values
Did you know that … you can integrate DC UPS systems in your PC-based automation solutions
with the free SITOP software tool (siemens.com/sitop-ups)?
SITOP DC UPS with battery modules
Extremely communicative
Compact DC UPS modules ensure continued operation,
even over a period of hours, depending on battery capacity and power requirements.
All relevant messages are output via floating contacts, or
optionally via a serial interface or USB port.
High system availability thanks to battery
management
The sophisticated battery management ensures optimal
charging of the batteries – and means that the unit is
always reliably available for buffering. The active battery
test function even checks the age of the battery. This
means that precautionary replacement of the battery isn’t
necessary –a substantial cost saving for your plant.
•DC UPS modules 6 A, 15 A, and 40 A
•Maintenance-free battery modules up to 12 Ah
•Monitoring of operational readiness, battery feeder,
aging, and charging status
•Extended life of loads and batteries due to battery
management
•Uninterrupted transition from readiness to buffering
mode
11
You can preselect the relevant power supplies on the
basis of their technical features, then compare them and
export them to the product list or into the shopping cart
in the Siemens Industry Mall.
The suitable DC UPS with capacitor or battery
technology can be selected using parameters like
buffering time and load current.
You can search a long time for the
right power supply solution.
Or you can simply find it.
A power supply unit has to meet many different requirements, and the choice of
available solutions is correspondingly large. In order to reduce the time it can
take to find a suitable solution, we have developed the SITOP Selection Tool that
supports your PLM process (product life cycle management) right from the start.
This is because with the SITOP selection tool you can not only select your power
supply – now you can also find the matching uninterruptible power supply (DCUPS). You can order the selected products easily in the Siemens Industry Mall. In
addition, you will automatically receive the required CAD data and circuit diagram macros for fast easy project planning.
12
CAD and CAE data in the Siemens image database for
simple planning
All product information is available per download via the
CAx online generator.
Did you know that … you can retrieve all the important data you need for planning
your power supply via the CAx online generator?
PLM optimization starts with selection
Everything you need for planning
The SITOP Selection Tool navigates you to the optimum
power supply for your requirements with a few mouse
clicks. Simply enter the relevant parameters and select
your solution. Even the expansion for the DC UPS can be
selected with a few clicks, whether with capacitor or battery technology. The table that compares a variety of
devices offers additional oversight. For displaying the
technical data, you can select between all data, all identical data, or all different data.
Additional information such as 3D data, circuit diagram
macros, certificates, and operating instructions are available with the click of mouse. You can download these in
DXF, STEP, and EPLAN format and use them directly for
your planning. They are also available via the CAx online
generator, and can be selected there individually as
required and downloaded. This not only saves you valuable planning time, you also benefit from transparent
documentation.
Once you’ve opted for a solution, you can export the
resulting product list into an Excel or PDF file, or move it
directly to the Industry Mall shopping cart and order
there. Choosing a product could hardly be faster, easier,
and more transparent.
Your advantages at a glance:
•Always the latest product data – direct from the
manufacturer
•Direct download of the individual data or as a package
via CAx online generator
•Direct utilization in drawing up designs
•Efficient compiling of machine
and plant documentation
•More reliable plant planning
13
You can have a bad history
with your power supply.
Or you can write history with it.
Twenty years ago, Siemens began to record a unique success story in the power
supply sector. Since then, SITOP has demonstrated in countless installations how
reliability, efficiency, and integration can be guaranteed permanently at the
highest level in all industrial sectors.
14
Top reliability
Top integration
Automatisierungstechnik Lothar Brodbeck (ATB) is a company that creates system solutions primarily for customers
in semiconductor technology, the photovoltaics industry,
and mechanical engineering. The 24-V supply of the automation components together with the central control unit
plays a vital role in these solutions. For this reason, ATB
chose SITOP power supply units and add-on modules,
some in redundant design. This choice proved to be the
right one. To date, not one single device has failed at a
customer’s site.
Matzdorf-Elektrotechnik GmbH builds systems for process
engineering and environmental technology, including
controls for biogas plants. The uninterruptible power supply SITOP UPS500P based on capacitor technology, in conjunction with a SIMATIC 477B panel PC, ensures reliable
operation. These components are precisely coordinated,
which means that the UPS can not only support a controlled shutdown, it can also restart the PC in the event
that the power supply is restored while the PC is shutting
down. This is a crucial advantage, especially in fully automatic biogas plants, because it means that the PC does
not need to be restarted manually as would typically be
required.
Top efficiency
Wirtz Werkzeuge GmbH specializes in high-tech machines
and automated transfer systems, for example, for the
automotive industry. Energy efficiency has very high priority for the company, therefore it is only logical for them
to rely on SITOP modular three-phase 40-A power supply
units. With an efficiency of 93 percent, they are extremely
energy-efficient and dissipate very little heat in the control cabinet. In addition, the selectivity module reliably
detects electrical faults in the 24-V paths, reduces downtimes to a minimum, and so plays its own role in redefining efficiency.
15
Further information
More about SITOP:
www.siemens.com/sitop
SITOP Selection Tool:
www.siemens.com/sitop-selection-tool
Information material as download:
www.siemens.com/sitop-infomaterial
Operating instructions as download:
www.siemens.com/sitop/manuals
CAx data (2D, 3D, circuit diagram macro) as download:
www.siemens.com/sitop-cax
Request all CAx data via the CAx online generator:
www.siemens.com/cax
Order electronically via Internet in the Industry Mall:
www.siemens.com/industrymall
Find your personal contact partner at:
www.siemens.com/automation/partner
Siemens AG
Industry Sector
Industry Automation
P.O. Box 48 48
90026 NUREMBERG
GERMANY
www.siemens.com/automation
Subject to changes without prior notice
Order No.: E80001-A2650-P310-X-7600
Dispo 46305
NC/120083 MI.SC.ST.XXXX.52.2.02
WS 04125.0
Printed in Germany
© Siemens AG 2012
The information provided in this brochure contains
merely general descriptions or characteristics of performance which in case of actual use do not always apply
as described or which may change as a result of further
development of the products. An obligation to provide
the respective characteristics shall only exist if expressly
agreed in the terms of contract.
All product designations may be trademarks or product
names of Siemens AG or supplier companies whose use
by third parties for their own purposes could violate the
rights of the owners.
Technical data, April 2012
SITOP power supply
siemens.com/sitop
Page 7
Page 8
Page 9
Page 10, 1-phase
Page 11, 3-phase
Page 12, 1- and 2-phase
Pages 13, 3-phase
SITOP lite
SITOP compact
LOGO!Power
SIMATIC Design
SITOP smart
SITOP modular
The cost-effective
basic power supply
The slim power supply unit
for control boxes
The flat power supply
for distribution boards
The optimal supply for
SIMATIC S7 and more
The powerful standard
power supply
The technology power supply
for demanding solutions
Page 6
Three good reasons for a
SITOP power supply
A reliable power supply is the basis for all production and for all plants, so it’s only
SITOP – Top in reliability
logical that you would be extra careful when selecting the best fitting power
Stabilized output voltages on request – it may not sound
like much, but it’s actually a key production criterion for
any plant, no matter what the industry. The high quality
of SITOP power supplies already guarantees a reliable
power supply. Numerous expansion components also protect against mains problems and problems on the DC side,
thus improving the reliability of the entire plant.
supply. Three factors of special importance: reliability, efficiency, and integration.
2
Pages 14 –17
Pages 18 –19
Special design
Expansion modules
Equipped for special functions
and conditions
Expansion modules
for boosting system availability
SITOP – Top in efficiency
SITOP – Top in integration
With energy costs rising, efficiency is an increasingly
important competitive argument. And that’s where SITOP
power supplies make a valuable contribution. Power loss is
low over the entire load range, including in no-load operation. Because a power supply is rarely operated at full load,
this provides excellent opportunities for savings.
The more fully a power supply is integrated into its environment, the higher its productivity. SITOP is optimally
tailored to automation systems such as SIMATIC, SINUMERIK, and SIMOTION, and is fully integrated in the TIA
Portal. Thanks to extensive supplementary information –
such as 3D data, circuit diagram macros, certificates, and
operating instructions – every SITOP solution can be configured for maximum efficiency. So there’s nothing standing in the way of fast, smooth implementation.
Pages 20 –21, with capacitors
Pages 22 –23, with battery modules
DC UPS, uninterruptible
DC power supply
Reliable 24 volt – even during power failures
3
Selection table
SITOP power supplies
Input voltage
Output
current
SITOP lite
SITOP compact
LOGO!Power
SITOP smart
SIMATIC Design
SITOP modular
“Special design,
special use”
Output voltage 24 V DC
1-phase 120 V AC,
230 V AC
0.6 A
6EP1331-5BA00
1.3 A
6EP1331-5BA10
6EP1331-1SH03
6EP1332-5BA00
6EP1332-1SH43
2 A
2.5 A
6EP1332-1LB00
6EP1332-2BA10
6ES7307-1BA01-0AA0
6EP1331-1LD00
6EP1332-1SH71
6EP1232-1AA00
3.1 A
6EP1332-1LD00
3.5 A
6EP1332-1SH31
3.7 A
6EP1332-2BA00
4 A
5 A
6EP1332-5BA10
6EP1332-1SH52
6EP1333-1LB00
6EP1232-1AA10
6EP1333-2AA01
6ES7307-1EA80-0AA0 6EP1333-3BA00
6EP1333-2BA01
6ES7307-1EA01-0AA0
6EP1334-2AA01
6ES7307-1KA02-0AA0 6EP1334-3BA00
6.2 A
10 A
6EP1333-1AL12
6EP1333-1LD00
6EP1334-1LB00
6EP1334-1AL12
6EP1334-2BA01
6EP1334-2AA01-0AB0
12.5 A
6EP1334-1LD00
20 A
6EP1336-2BA10
6EP1336-3BA00
6EP1336-3BA10
40 A
6EP1337-3BA00
SITOP Selection Tool
Making the perfect choice
The SITOP selection tool shortens the time
it takes to select not only your power supply but also the matching uninterruptible
power supply (DC UPS) based on capacitor
or battery technology. You can order the
selected products easily via the Siemens Industry Mall. And you’ll also receive further
information such as product data sheets,
3D data, or circuit diagram macros for fast
and easy project planning.
The tool is available on the Internet and in
the Industry Mall:
www.siemens.com/sitop-selection-tool
www.siemens.com/industrymall
4
Step 1:
The appropriate power supplies are preselected
based on the user’s technical requirements
Step 2:
Several power supplies can be compared based on
their technical data for further product selection
Step 3:
After the desired products have been selected from
the product list, these selections can be exported
or transferred directly to the user’s Industry Mall
shopping basket
Input voltage
Output current
SITOP compact
LOGO!Power
SITOP smart
SIMATIC Design
Output voltage 24 V DC
3-phase 400 – 500 V AC
SITOP modular
“Special design
special use”
6EP1333-3BA001)
5 A
8 A
6ES7148-4PC00-0HA0
6EP1433-2CA00
10 A
6EP1434-2BA10
6EP1334-3BA001)
20 A
6EP1436-2BA10
6EP1436-3BA10
6EP1436-3BA00
30 A
6EP1437-3BA20
40 A
6EP1437-3BA10
6EP1437-2BA20
6EP1437-3BA00
24 – 110 V DC
110 – 300 V DC
2 A
0.6 A
6EP1331-5BA00
1.3 A
6EP1331-5BA10
6EP1331-1SH03
2.5 A
6EP1332-5BA00
6EP1333-1SH43
4 A
6EP1332-5BA10
6EP1332-1SH52
88 – 350 V DC
20 A
600 V DC
20 A
1)
6ES7305-1BA80-0AA0
6EP1336-3BA10
6EP1536-3AA00
Grey: more information in Catalog KT10.1 or in Online Catalog CA01
Connection to 2 phases 230 – 500 V AC – see data sheet SITOP modular 1-/2-phase
Input voltage
Output
SITOP compact
LOGO!Power
SITOP modular
“Special design
special use”
w
Output voltage 5, 12, 15, 48, … V DC
1-phase 120 V AC, 230 V AC
5 V/3 A
6EP1311-1SH03
5 V/6.3 A
6EP1311-1SH13
12 V/1.9 A
12 V/2.0 A
6EP1321-1SH03
6EP1321-5BA00
12 V/3.0 A
6EP1321-1LD00
12 V/4.5 A
12V/6.5 A
6EP1322-1SH03
6EP1322-5BA10
12 V/8.3 A
24 V DC
6EP1322-1LD00
15 V/1.9 A
6EP1351-1SH03
15 V/4 A
6EP1352-1SH03
3 – 52 V/2 – 10 A
6EP1353-2BA00
2 x 15 V/3.5 A
6EP1353-0AA00
12 V/2.5 A
6EP1621-2BA00
12 V/20 A
3-phase 400 – 500 V AC
6EP1424-3BA00
48 V/10 A
6EP1456-3BA00
48 V/20 A
6EP1457-3BA00
5
SITOP lite
Cost-effective basic power supply
new!
new!
Technical data
SITOP lite
Output voltage / current, type
Order No.
24 V / 2.5 A, PSU100L
6EP1332-1LB00
24 V / 5 A, PSU100L
6EP1333-1LB00
24 V / 10 A, PSU100L
6EP1334-1LB00
Rated line frequency
50/60 Hz
50/60 Hz
50/60 Hz
Rated input voltage
–– Range
Mains buffering
120 / 230 V AC
93...132 /187...264 V AC
> 20 ms (at 93/187 V)
120 / 230 V AC
93...132 /187...264 V AC
> 20 ms (at 93/187 V)
120 / 230 V AC
93...132 /187...264 V AC
> 20 ms (at 93/187 V)
Rated input current
–– Inrush current (25 °C)
–– Recommended1) miniature
circuit breaker
Rated output voltage
–– Tolerance
–– Setting range
Rated output current
–– Derating
Efficiency at rated values, approx.
1.1/ 0.65 A
< 27 A
3 A Characteristic C
2.1 / 1.15 A
< 32 A
6 A Characteristic C
4.3 / 2.4 A
< 65 A
10 A Characteristic C
24 V DC
± 3 %
22.8...26.4 V DC
2.5 A
from +45 °C (2 %/K)
85 %
24 V DC
± 3 %
22.8...26.4 V DC
5 A
from +45 °C (2 %/K)
86 %
24 V DC
± 3 %
22.8...26.4 V DC
10 A
from +45 °C (3 %/K)
89 %
Parallel switching
Yes, constant current
Yes, constant current
Yes, constant current
No-load loss
Electronic short-circuit protection
Radio interference suppression
(EN 55022)
Degree of protection (EN 60529)
Ambient temperature
Dimensions (WxHxD) in mm
Weight approx.
Certification
Yes
Not applicable
Class A
Yes
Yes
Class A
Yes
No
Class A
IP20
IP20
IP20
32.5 x 125 x 125
50 x 125 x 125
70 x 125 x 125
0… +60 °C
0.4 kg
CE, cULus
Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)
6
new!
0… +60 °C
0.5 kg
CE, cULus
0… +60 °C
0.75 kg
CE, cULus
SITOP compact
Slim power supply for control boxes
Technical data
Output voltage / current, type
Order No.
Rated input voltage
–– Range
Overall width 22.5 mm
24 V/2.5 A, PSU100C
6EP1332-5BA00
24 V/4 A, PSU100C
6EP1332-5BA10
12 V/6.5 A, PSU100C
6EP1322-5BA10
50/60 Hz
50/60 Hz
50/60 Hz
50/60 Hz
50/60 Hz
50/60 Hz
Rated input current
–– Recommended miniature
circuit breaker
Rated output voltage
–– Tolerance
–– Setting range
Rated output current
–– Derating
Efficiency at rated values, approx.
0.28 – 0.18 A
10 A characteristic C
16 A characteristic B
24 V DC
±3%
–
0.6 A
from +55 °C (3 %/K)
82 %
Parallel switching
< 0.5 W
No
Electronic short-circuit protection Yes, restart
Radio interference suppression
(EN 55022)
Supply harmonics limitation
(EN 61000-3-2)
Degree of protection (EN 60529)
Class B
Dimensions (WxHxD) in mm
Ambient temperature
Weight approx.
Connections 1)
Certification
Overall width 52.5 mm
12 V/2 A, PSU100C
6EP1321-5BA00
Mains buffering
No-load loss
Overall width 45 mm
24 V/1.3 A, PSU100C
6EP1331-5BA10
100 – 230 V AC
85...264 V AC/
110…300 V DC
> 20 ms (at 120/230 V AC)
Rated line frequency
Overall width 30 mm
24 V/0.6 A, PSU100C
6EP1331-5BA00
100 – 230 V AC
85...264 V AC/
110…300 V DC
> 20 ms (at 120/230 V AC)
0.63 – 0.31 A
10 A characteristic C
16 A characteristic B
24 V DC
±3%
22.2...26.4 V DC
1.3 A
from +55 °C (3 %/K)
86 %
< 0.75 W
Yes 2)
Yes, restart
Class B
100 – 230 V AC
85...264 V AC/
110…300 V DC
> 20 ms (at 120/230 V AC)
0.63 – 0.31 A
10 A characteristic C
16 A characteristic B
12 V DC
±3%
10.5...12.9 V DC
2 A
from +55 °C (3 %/K)
82 %
< 0.5 W
100 – 230 V AC
85...264 V AC/
110…300 V DC
> 20 ms (at 120/230 V AC)
1.33 – 0.67 A
10 A characteristic C
16 A characteristic B
24 V DC
±3%
22.2...26.4 V DC
2.5 A
from +50 °C (3 %/K)
87%
< 0.75 W
100 – 230 V AC
85...264 V AC/
110…300 V DC
> 20 ms (at 120/230 V AC)
2.25– 1.15 A
10 A characteristic C
16 A characteristic B
24 V DC
±3%
22.2...26.4 V DC
4 A
from +50 °C (3 %/K)
88 %
< 0.75 W
100 – 230 V AC
85...264 V AC/
110…300 V DC
> 20 ms (at 120/230 V AC)
1.6 – 0.75 A
10 A characteristic C
16 A characteristic B
12 V DC
±3%
10.5…12.9 V DC
6.5 A
from +50 °C (3 %/K)
85 %
< 0.75 W
Yes 2)
Yes 2)
Yes 2)
Yes 2)
Class B
Class B
Class B
Class B
Yes, restart
Yes, restart
Yes, restart
Yes, restart
Not applicable
Not applicable
Not applicable
Not applicable
Yes
Yes
IP20
IP20
IP20
IP20
IP20
IP20
22.5 x 80 x 100
30 x 80 x 100
30 x 80 x 100
45 x 80 x 100
52.5 x 80 x 100
52.5 x 80 x 100
–20...+70 °C
0.12 kg
Removable screw terminal
CE, cULus, cCSAus, ATEX,
cCSAus Class I Div 2
–20...+70 °C
0.17 kg
Removable screw terminal
CE, cULus, cCSAus, ATEX,
cCSAus Class I Div 2
–20...+70 °C
0.17 kg
Removable screw terminal
CE, cULus, cCSAus, ATEX,
cCSAus Class I Div 2
–20...+70 °C
0.22 kg
Removable screw terminal
CE, cULus, cCSAus, ATEX,
cCSAus Class I Div 2
–20...+70 °C
0.32 kg
Removable screw terminal
CE, cULus, cCSAus, ATEX,
cCSAus Class I Div 2
–20...+70 °C
0.32 kg
Removable screw terminal
CE, cULus, cCSAus, ATEX,
cCSAus Class I Div 2
1) Accessory: removable spring-type terminal, order no. 6EP1971-5BA00
2) The maximum starting current is limited to the rated output current of one power supply
Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)
7
LOGO!Power
Flat power supply for distribution boards
Technical data
Output voltage / current
Order No.
54 mm design
5 V/3 A
6EP1311-1SH03
12 V/1.9 A
6EP1321-1SH03
15 V/1.9 A
6EP1351-1SH03
Rated input voltage
–– Range
100 – 240 V AC
85...264 V AC/110...300 V DC
Mains buffering
> 40 ms (at 187 V)
Rated input current
–– Inrush current (25 °C)
–– Recommended miniature
circuit breaker
Rated output voltage
–– Tolerance
–– Setting range
Output current – rated value
–– Derating
0.36 – 0.22 A
0.53 – 0.30 0.63 – 0.33 A
< 26 A
< 25 < 25 A
10 A characteristic C resp. 16 A characteristic B
Rated line frequency
Efficiency at rated values, approx.
Parallel switching
Yes
No-load loss
Electronic short-circuit protection
Radio interference suppression
(EN 55022)
Supply harmonics limitation
(EN 61000-3-2)
Degree of protection (EN 60529)
Ambient temperature
Dimensions (WxHxD) in mm
Weight approx.
Certification
< 1.5 W
12 V/4.5 A
6EP1322-1SH03
100 – 240 V A
85...264 V AC/110...300 V D
0.70 – 0.35 A
< 25 A
15 V/4 A
6EP1352-1SH03
50/60 Hz
0.71 – 0.37 A
1.13 – 0.61 A
1.24 – 0.68 < 50 A
< 55 A
< 55 10 A characteristic C resp. 16 A characteristic B
5 V DC
±3%
10.5...16.1 V DC 10.5...16.1 V DC 22.2...26.4 V DC 4.6...5.4 V DC
6.3 A
1.3 A
1.9 A
1.9 A
from +55 °C
from +55 °C
from +55 °C
from +55 °C
(2 %/K)
(2 %/K)
(2 %/K)
(2 %/K)
80 %
80 %
85 %
83 %
12 V DC
< 1.8 W
15 V DC
< 2 W
24 V DC
< 2 W
Yes, constant current
90 mm design
24 V/2.5 A
6EP1332-1SH43
< 1.5 W
Yes
1.22 – 0.66 A
< 46 A
12 V DC
15 V DC
24 V DC
10.5...16.1 V DC
4.5 A
from +55 °C
(2 %/K)
85 %
10.5...16.1 V DC
4.0 A
from +55 °C
(2 %/K)
85 %
22.2...26.4 V DC
2.5 A
from +55 °C
(2 %/K)
88 %
< 1.9 W
< 2.3 W
< 1.8 W
Yes, constant current
Class B
24 V/4 A
6EP1332-1SH52
100 – 240 V AC
85…264 V AC/
110...300 V DC
> 40 ms (at 187 V)
50/60 Hz
1.95 – 0.97 A
< 30 A
10 A char. C
resp. 16 A char. B
24 V DC
±3%
22.2...26.4 V DC
4.0 A
from +55 °C
(2 %/K)
89 %
< 2 W
Yes
Yes, constant current
Class B
Class B
Not applicable
Not applicable
Yes
IP20
IP20
IP20
54 x 90 x 55
72 x 90 x 55
90 x 90 x 55
–20… +70 °C
0.17 kg
CE, cULus, FM,
GL, ABS, ATEX,
NEC Class 2,
cCSAus Class I
Div 2
–20… +70 °C
CE, cULus, FM,
GL, ABS, ATEX,
NEC Class 2,
cCSAus Class I
Div 2
CE, cULus, FM,
GL, ABS, ATEX,
NEC Class 2,
cCSAus Class I
Div 2
Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)
8
5 V/6.3 A
6EP1311-1SH13
> 40 ms (at 187 V)
50/60 Hz
5 V DC
±3%
4.6...5.4 V DC
3.0 A
from +55 °C
(2 %/K)
77 %
72 mm design
24 V/1.3 A
6EP1331-1SH03
CE, cULus, FM,
GL, ABS, ATEX,
SEMI F47, NEC
Class 2, cCSAus
Class I Div 2
0.25 kg
CE, cULus, FM,
GL, ABS, ATEX,
NEC Class 2,
cCSAus Class I
Div 2
–20… +70 °C
CE, cULus, FM,
GL, ABS, ATEX,
cCSAus Class I
Div 2
CE, cULus, FM,
GL, ABS, ATEX,
cCSAus Class I
Div 2
CE, cULus, FM,
GL, ABS, ATEX,
SEMI F47, NEC
Class2, cCSAus
Class I Div 2
0.34 kg
CE, cULus, FM,
GL, ABS, ATEX,
cCSAus Class I Div 2
SITOP
in SIMATIC design
Technical data
SIMATIC S7-1200 design
SIMATIC S7-200 design
SIMATIC S7-300 design
SIMATIC ET200 pro PS
Output voltage /
current, type
24 V/2.5 A, PM1207
24 V/3.5 A
24 V/2 A, PS307
24 V/5 A, PS307
24 V/10 A, PS307
24 V/5 A, outdoor
Order No.
6EP1332-1SH71
6EP1332-1SH31
6ES7307-1BA01-0AA0
6ES7307-1EA01-0AA0
6ES7307-1KA02-0AA0
6ES7307-1EA80-0AA0
6ES7 148-4PC00-0HA0
Rated input voltage
120/230 V AC
automatic range selection
120/230 V AC
120/230 V AC
automatic range selection
120/230 V AC
automatic range selection
120/230 V AC
automatic range selection
120/230 V AC
400 – 480 V 3 AC
––Range
85…132 V/176…264 V AC
93…132 V/187…264 V AC
85…132 V/170…264 V AC
85…132 V/170…264 V AC
85…132 V / 170...264 V AC
93…132 V/187…264 V AC
340…550 V 3 AC
Mains buffering
> 20 ms (at 93/187 V)
> 20 ms (at 187 V)
> 20 ms (at 93/187 V)
> 20 ms (at 93/187 V)
> 20 ms (at 93/187 V)
> 20 ms (at 93/187 V)
15 ms (at 400 V)
Rated line frequency
50/60 Hz
50/60 Hz
50/60 Hz
50/60 Hz
50/60 Hz
50/60 Hz
50/60 Hz
Rated input current
––Inrush current (25 °C)
1.2/0.67 A
< 13 A
1.65/0.95 A
< 33 A
0.9/0.5 A
< 22 A
2.3/1.2 A
< 20 A
4.2/1.9 A
< 55 A
2.2/1.2 A
< 45 A
2 A
< 40 A
––Recommended miniature
circuit breaker
16 A charakt. B,
10 A charakt. C
10 A charakt. C,
6 A charakt. D
3 A charakt. C
6 A charakt. C
10 A charakt. C
10 A charakt. C
3RV1021-1DA15 or fuse
max. 25 A, time-lag
Rated output voltage
––Tolerance
24 V DC
± 3 %
24 V DC
± 5 %
24 V DC
± 3 %
24 V DC
± 3 %
24 V DC
± 3 %
24 V DC
± 3 %
24 V DC
–5 % /+3 %
––Setting range
–
–
–
–
–
–
–
1)
24 V/8 A
Rated output current
2.5 A
3.5 A
2 A
5 A
10 A
5 A
8 A
Efficiency at rated values,
approx.
83 %
84 %
84 %
86 %
90 %
84 %
88 %
Parallel switching
Yes
Yes
Yes
Yes
Yes
No
No
Electronic short-circuit
protection
Yes, constant current
characteristic
Yes, restart
Yes, restart
Yes, restart
Yes, restart
Yes, restart
Yes, restart
Radio interference
suppression (EN 55022)
Class B
Class B
Class B
Class B
Class B
Class B
Class B
Supply harmonics limitation (EN 61000-3-2)
Not applicable
Yes
Not applicable
Yes
Yes
No
No
Degree of protection
(EN 60529)
IP20
IP20
IP20
IP20
IP20
IP20
IP67
Ambient temperature
0…+60 °C
0…+60 °C
0…+60 °C
0…+60 °C
0…+60 °C
–25…+70 °C
–25...+55 °C
Installation
DIN rail or
wall mounting
DIN rail or
wall mounting
Can be mounted on S7 rail. Mounting adapter for DIN rail 35 x15 mm:
6EP1971-1BA00
Can be mounted on S7 rail.
Mounting adapter:
6ES7390-6BA00-0AA0
Screw mounting on
SIMATIC ET 200pro
system rail
Maße (B x H x T) in mm
70 x 100 x 75
160 x 80 x 62
40 x 125 x 120
60 x 125 x 120
80 x 125 x 120
80 x 125 x 120
310 x 135.5 x 90+connector
Weight approx.
0.3 kg
0.5 kg
0.4 kg
0.6 kg
0.8 kg
0.57 kg
2.8 kg
Certification
CE, cULus, ATEX, cCSAus
Class I Div 2, GL, ABS
CE, cULus
CE, cULus, ATEX, cULus Class I Div 2, GL, ABS
CE, UL, CSA
CE
1)
Condensation permissible, increased vibration and shock resistance
Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)
9
SITOP smart
Powerful standard power supply
new!
Technical data
SITOP smart 1-phase
Output voltage/current, type 24 V/2.5 A
Order No.
6EP1332-2BA10
Rated input
voltage
–– Range
Mains buffering
Rated line frequency
Rated input current
–– Inrush current (25 °C)
–– Recommended miniature
circuit breaker
Rated output voltage
–– Tolerance
–– Setting range
Rated output current
–– Permanently up to +45 °C
–– Overload behavior
(extra power for 5 s/min)
–– Derating
Efficiency at rated values,
approx.
Parallel switching
Electronic short-circuit
protection
Radio interference
suppression (EN 55022)
Supply harmonics limitation
(EN 61000-3-2)
Degree of protection
(EN 60529)
Ambient temperature
Dimensions (WxHxD) in mm
Weight approx.
Certification
10
24 V/5 A
6EP1333-2AA01
24 V/5 A
6EP1333-2BA01
24 V/10 A
6EP1334-2AA01
24 V/10 A
6EP1334-2BA01
24 V/10 A, Wallmount
6EP1334-2AA01-0AB0
24 V/ 20 A, PSU100S
6EP1336-2BA10
120/230 V AC
120/230 V AC
120/230 V AC
120/230 V AC
120/230 V AC
120/230 V AC
120/230 V AC
85...132/170...264 V AC 85...132/170...264 V AC 85...132/170...264 V AC 85...132/170...264 V AC 85...132/170...264 V AC 85...132/170...264 V AC 85...132/176...264 V AC
> 20 ms (at 93/187 V)
> 20 ms (at 93/187 V)
> 20 ms (at 93/187 V)
> 20 ms (at 93/187 V)
> 20 ms (at 93/187 V)
> 20 ms (at 93/187 V)
> 20 ms (at 93/187 V)
50/60 Hz
1.1/0.65 A
< 14 A
3 A characteristic C
50/60 Hz
2.1/1.15 A
< 32 A
6 A characteristic C
50/60 Hz
2.1/1.15 A
< 32 A
6 A characteristic C
50/60 Hz
4.1/2.4 A
< 65 A
10 A characteristic C
50/60 Hz
4.1/2.0 A
< 65 A
10 A characteristic C
50/60 Hz
4.1/2.0 A
< 65 A
10 A characteristic C
50/60 Hz
7.5/3.5 A
< 11 A
10 A characteristic C
24 V DC
±3%
22.8...28 V DC
2.5 A
3A
3.75 A
24 V DC
±3%
22.8...28 V DC
5 A
6A
7.5 A
24 V DC
±3%
22.8...28 V DC
5 A
6A
7.5 A
DC 24 V
±3%
DC 22.8...28 V
10 A
12 A
15 A
24 V DC
±3%
22.8...28 V DC
10 A
12 A
15 A
24 V DC
±3%
22.8...28 V DC
10 A
12 A
15 A
24 V DC
±3%
22.8...28 V DC
20 A
24 A
30 A
—
85 %
—
87 %
—
87 %
—
90 %
—
91 %
—
90 %
from +60 °C (5 %/K)
90%
Yes
Yes
Yes
Yes
Yes
Yes
Class B
Class B
Class B
Class B
Class B
Class B
Class B
Not applicable
No
Yes
No
Yes
Yes
Yes
IP20
IP20
IP20
IP20
IP20
IP20
IP 20
Yes, constant current
0...+60 °C
32.5 x 125 x 125
0.4 kg
0...+60 °C
50 x 125 x 125
0.5 kg
CE, UL, CSA, GL, ATEX, cCSAus Class I Div 2
0...+60 °C
50 x 125 x 125
0.5 kg
Specifications at rated input voltage and ambient temperature at +25 °C (unless otherwise specified)
0...+60 °C
70 x 125 x 125
0.75 kg
0...+60 °C
70 x 125 x 125
0.8 kg
0...+60 °C
70 x 125 x 125
0.85 kg
Yes
Yes, restart
0...+70 °C
115 x 145 x 150
2.4 kg
CE, cULus, cCSAus
Class1 Div 2, (ATEX und
GL in preparation)
SITOP smart
Powerful standard power supply
Technical data
Output voltage /
current, type
Order No.
Rated input voltage
–– Range
Mains buffering
Rated line frequency
Rated input current
–– Inrush current (25 °C)
–– Recommended miniature
circuit breaker
Rated output voltage
–– Tolerance
–– Setting range
Overload characteristics
–– Permanently up to +45 °C
–– Overload behavior
(extra power for 5 s/min)
–– Derating
Efficiency at rated values, approx.
Parallel switching
Electronic short-circuit protection
Radio interference suppression
(EN 55022)
Supply harmonics limitation
(EN 61000-3-2)
Degree of protection
(EN 60529)
Ambient temperature
Dimensions (WxHxD) in mm
Weight approx.
Certification
SITOP smart 3-phase
24 V/10 A, PSU300S
24 V/20 A, PSU300S
24 V/40 A, PSU300S
6EP1434-2BA10
6EP1436-2BA10
6EP1437-2BA20
50/60 Hz
50/60 Hz
50/60 Hz
–
91 %
from +60 °C (5 %/K)
91 %
from +60 °C (2.5 %/K)
91.5 %
Yes, restart
Yes, restart
Yes, restart
400 – 500 V 3 AC
340…550 V 3 AC
> 6 ms (at 400 V)
0.7 – 0.5 A
< 36 A
From 6 – 16 A charact. C 3-ph. coupled or
3 RV2011-1DA10 or 3 RV2711-1DD10
24 V DC
±3%
24...28 V DC
10 A
12 A
15 A
Yes
Class B
400 – 500 V 3 AC
340…550 V 3 AC
> 6 ms (at 400 V)
1.2 – 1.0 A
< 36 A
From 6 – 16 A charact. C 3-ph. coupled or
3 RV2011-1DA10 or 3 RV2711-1DD10
24 V DC
±3%
24...28 V DC
20 A
24 A
30 A
Yes
Class B
400 – 500 V 3 AC
340…550 V 3 AC
> 6 ms (at 400 V)
1.7 – 1.5 A
< 60 A
From 10 – 16 A charact. C 3-ph. coupled or
3 RV2011-1DA10 or 3 RV2711-1DD10
24 V DC
±3%
24...28 V DC
40 A
48 A
60 A
Yes
Class B
Yes
Yes
Yes
IP20
IP20
IP20
0...+70 °C
0...+70 °C
0...+70 °C
1.6 kg
1.6 kg
3.7 kg
90 x 145 x 150
CE, cULus, ATEX, cCSAus Class I Div 2, GL
90 x 145 x 150
CE, cULus, ATEX, cCSAus Class I Div 2, GL
150 x 145 x 150
CE, cULus, ATEX, cCSAus Class I Div 2, GL
Specifications at rated input voltage and ambient temperature at +25 °C (unless otherwise specified)
11
SITOP modular
Technology power supply for demanding solutions
Technical data
Output voltage / current, type
Order No.
SITOP modular 1-phase and 2-phase 1)
Rated input voltage
–– Range
24 V/5 A
6EP1333-3BA00
24 V/10 A
6EP1334-3BA00
120 – 230/230 – 500 V AC 120 – 230/230 – 500 V AC AC 120 – 230 V
85…264/176…550 V AC 85…264/176…550 V AC AC 85…275 V oder DC 88…350 V
Mains buffering
> 25 ms (at 120/230 V)
> 25 ms (at 120/230 V)
Rated input current
–– Inrush current (25 °C)
–– Recommended miniature
circuit breaker
2.2 – 1.2/1.2 – 0.61 A
< 35 A
6 A charact. C
or 3RV2011-1xA10
4.4 – 2.4/2.4 – 1.1 A
< 35 A
6 A charact. C
or 3RV2011-1xA10
Rated output voltage
–– Tolerance
–– Setting range
Rated output current
–– Overload behavior
(power boost for 25 ms)
–– Overload behavior
(extra power for 5 s/min)
–– Derating
24 V DC
±3%
24…28.8 V DC
5 A
15 A
24 V DC
±3%
24…28.8 V DC
10 A
30 A
Rated line frequency
50/60 Hz
from +60 °C
Efficiency at rated values, approx. 87 %
24 V/20 A, PSU100M
6EP1336-3BA10
24 V/20 A, PSU400M
6EP1536-3AA00
24 V/40 A
6EP1337-3BA00
600 V DC
200...900 V DC,
start-up from approx. 400 V
AC 120/230 V
AC 85...132/ 176...264 V,
Anlauf ab 93/ 183 V
> 20 ms (at 230 V)
AC 120/230 V
AC 85...132/ 176...264 V,
Anlauf ab 95/ 190 V
> 20 ms (at 230 V)
4.6 – 2.5 A
< 20 A
6 A charact. C
or 3RV1021-1xA10
0.85 A
<8A
7.7/3.5 A
< 60 A
10 A charact. C
or 3RV2411-1xA10
15.0/8.0 A
< 125 A
20 A charact. C
or 3RV2411-xxA10
24 V DC
±3%
24…28.8 V DC
20 A
60 A
24 V DC
± 3 %
24…28.8 V DC
20 A
24 V DC
±3%
24…28.8 V DC
20 A
60 A
24 V DC
±3%
24…28.8 V DC
40 A
120 A
30 A
30 A
from +60 °C
from +60 °C
from +60 °C
from +60 °C
87 %
93 %
from +60 °C (5.5 %/K),
200…300 V DC, 820…900 V DC
95%
89 %
88 %
50/60 Hz
> 25 ms (at 120/230 V)
50/60 Hz
50/60 Hz
50/60 Hz
Parallel switching
Yes, output characteristic can be switched to parallel operation
Radio interference suppression
(EN 55022)
Supply harmonics limitation
(EN 61000-3-2)
Degree of protection (EN 60529)
Class B
Class B
Class B
Class A (emission)
Class B
Class B
Yes
Yes
Yes
No
Yes
No
Electronic short-circuit protection Yes, constant current or latching shutdown selectable. Constant current: approx. 1.15 x rated output current
Ambient temperature
Dimensions (WxHxD) in mm
Weight approx.
Certification
1)
12
24 V/20 A
6EP1336-3BA00
2)
IP20
–25…+70 ° C
70 x 125 x 125
1.2 kg
IP20
–25…+70 ° C
90 x 125 x 125
1.4 kg
IP20
–25…+70 °C
90 x 125 x 125
1.5 kg
CE, cULus, GL, ABS, SEMI CE, cULus, GL, ABS, SEMI CE, cULus, GL, ABS
F47 2)
F472)
Connection to 2 phases of a three-phase supply system
At input voltage 208 to 230 V AC
3)
4)
IP 20
–25…+70 ° C
90 x 125 x 125
1.2 kg
CE, cULus
(GL and ABS in preparation)
In conjunction with one buffer module
In conjunction with two buffer modules
IP20
0…+70 ° C
160 x 125 x 125
2.2 kg
IP20
0…+70 ° C
240 x 125 x 125
2.9 kg
CE, cULus, GL, ABS, SEMI CE, cULus, SEMI F474)
F473)
SITOP modular 3-phase
SITOP modular 3-phase, 48 V
24 V/20 A, PSU300M
24 V/20 A
24 V/40 A, PSU300M
24 V/40 A
48 V/10 A, PSU300M
48 V/20 A
400 – 500 V 3 AC
320…575 V 3 AC
320...550 V 3 AC,
start-up from 340 V
400 – 500 V 3 AC
320…575 V 3 AC
400 - 500 V 3 AC
320...550 V 3 AC,
start-up from 340 V
> 6 ms (at 400 V)
400 – 500 V 3 AC
320…575 V 3 AC
320...550 V 3 AC,
start-up from 340 V
6EP1436-3BA10
> 15 ms (at 400 V)
6EP1436-3BA00
> 6 ms (at 400 V)
6EP1437-3BA10
> 15 ms (at 400 V)
6EP1437-3BA00
6EP1456-3BA00
> 15 ms (at 400 V)
6EP1457-3BA00
> 6 ms (at 400 V)
50/60 Hz
1.2 – 1.0 A
< 18 A
6 – 16 A charact. C 3-ph.
coupled or 3RV2011-1DA10
or 3RV2711-1DD10
50/60 Hz
1.1 – 0.9 A
< 35 A
6 – 16 A charact. C 3-ph.
coupled or 3RV2011-1DA10
or 3RV2711-1DD10
50/60 Hz
2.6 – 2.1 A
< 56 A
10 – 16 A charact. C 3-ph.
coupled or 3RV2011-1DA10
or 3RV2711-1DD10
50/60 Hz
2.0 – 1.7 A
< 70 A
10 – 16 A charact. C 3-ph.
coupled or 3RV2011-1DA10
or 3RV2711-1DD10
50/60 Hz
1.2 – 1.0 A
< 18 A
6 – 16 A charact. C 3-ph.
coupled or 3RV2011-1DA10
or 3RV2711-1DD10
50/60 Hz
2.2 A (with 400 V)
< 70 A
10 – 16 A charact. C 3-ph.
coupled or 3RV2011-1DA10
or 3RV2711-1DD10
24 V DC
± 3 %
24...28.8 V DC
24 V DC
± 3 %
24…28.8 V DC
24 V DC
± 3 %
24...28.8 V DC
24 V DC
± 3 %
24…28.8 V DC
48 V DC
± 3 %
42…56 V DC
48 V DC
± 3 %
42…56 V DC
20 A
60 A
20 A
60 A
40 A
120 A
40 A
120 A
10 A
23A
20 A
60A
30 A
from +60 °C (3 %/K)
60 A
from +60 °C
from +60 °C (3.8 %/K)
15 A
from +60 °C
from +60 °C (3 %/K)
93%
90%
93%
90%
Yes, output characteristic can be switched to parallel operation
Yes, constant current or latching shutdown selectable. Constant current: approx. 1.15 x rated output current
93%
90%
Class B
Class B
Class B
Class B
Class B
Class B
Yes
Yes
Yes
Yes
Yes
Yes
IP20
IP20
IP20
IP20
IP 20
IP20
–25…+70 °C
70 x 125 x 125
1.2 kg
CE, cULus, GL, ABS, SEMI F47
0…+70 °C
160 x 125 x 125
2.0 kg
CE, UL, CSA, GL, ABS, SEMI F47
–25…+70 °C
150 x 125 x 150
3.4 kg
CE, cULus, GL, ABS, SEMI F47
Specifications at rated input voltage and ambient temperature at +25 °C (unless otherwise specified)
0…+70 °C
240 x 125 x 125
3.2 kg
CE, UL, CSA, SEMI F47
–10...+70 °C
70 x 125 x 125
1.2 kg
CE, cULus, GL, ABS
0…+60 °C
240 x 125 x 125
3.2 kg
CE, UL, CSA, GL, ABS
13
SITOP
in special design, for special uses
new!
new!
Technical data
PSU100D direct wall mounting
Output voltage / current
12 V/3 A
24 V/2.1 A
Rated input voltage
100 – 240 V AC
100 – 240 V AC
Order No.
–– Range
Mains buffering
Rated line frequency
Rated input current
–– Inrush current (25 °C)
–– Recommended miniature circuit breaker
Rated output voltage
–– Tolerance
–– Setting range
Output current – rated value
–– Derating
Efficiency at rated values,
approx.
Parallel switching
Electronic short-circuit
protection
Radio interference suppression
(EN 55022
Supply harmonics limitation
(EN 61000-3-2)
Degree of protection (EN 60529)
Ambient temperature
Installation
Dimensions (WxHxD) in mm
Weight approx.
Certification
6EP1321 – 1LD00
85...264 V AC
> 15 ms (at 115/230 V)
50/60 Hz
0.65 A
< 30 A
10 A characteristic C, 16 A characteristic B
6EP1332 – 1LD00
85...264 V AC
85...264 V AC
> 15 ms (at 115/230 V)
50/60 Hz
1,.1 – 0.7 A
< 60 A
100 – 240 V AC
> 15 ms (at 115/230 V)
50/60 Hz
1.5 – 1.0 A
< 60 A
12 V DC
24 V DC
24 V DC
11…14 V DC
22...28 V DC
22...28 V DC
Yes
Yes
Yes
Class B
Class B
Class B
Not applicable
Not applicable
Yes
IP20
IP20
IP20
97 x 98 x 38
97 x 128 x 38
97 x 128 x 38
CE, cULus und cURus
CE, cULus und cURus
CE, cULus und cURus
+/- 2%
3A
from +50 °C (2.5 %/K)
84 %
Yes, restart
–10 °C ...+70 °C
Wall mounting, variable installation position
0.37 kg
Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)
14
24 V/3.1 A
6EP1331 – 1LD00
+/- 2%
2.1 A
from +50 °C (2.5 %/K)
86 %
Yes, restart
–10°C...+70°C
0.35 kg
+/- 2%
3.1 A
from +50 °C (2.5 %/K)
86 %
Yes, restart
–10°C...+70°C
0.37 kg
new!
new!
new!
PSU100D direct wall mounting
24 V/4.1 A
12 V/8.3 A
24 V/6.2 A
24 V/12.5 A
100 – 240 V AC
100 – 240 V AC
100 – 240 V AC
100 – 240 V AC
> 15 ms (at 115/230 V)
> 15 ms (at 115/230 V)
> 15 ms (at 115/230 V)
> 15 ms (at 115/230 V)
6EP1332-1LD10
85...264 V AC
50/60 Hz
2.0 – 1.1 A
< 75 A
6EP1322-1LD00
85...264 V AC
50/60 Hz
2.0 – 1.1 A
< 75 A
6EP1333-1LD00
85...264 V AC
50/60 Hz
3.1 – 2.0 A
< 75 A
6EP1334-1LD001)
85...264 V AC
50/60 Hz
4.0 – 2.0 A
< 60 A
DC 24 V
12 V DC
24 V DC
24 V DC
22...28 V DC
11…14 V DC
22...28 V DC
22...28 V DC
Yes
Yes
Yes
Yes
Class B
Class B
Class B
Class B
Yes
Yes
No
Yes
IP20
IP20
IP20
IP20
97 x 158 x 38
97 x 158 x 38
97 x 178 x 38
105 x 199 x 41
CE, cULus und cURus
CE, cULus und cURus
CE, cULus und cURus
CE, cULus und cURus
+/- 2 %
4.1 A
from +50 °C (2.5 %/K)
86 %
Yes, restart
–10°C...+70°C
Wall mounting, variable installation position
0.50 kg
+/- 2 %
8.3 A
from +50 °C (2.5 %/K)
84 %
Yes, restar
–10°C...+70°C
0.57 kg
+/- 2 %
6.2 A
from +50 °C (2.5 %/K)
86 %
Yes, restart
–10°C...+70°C
0.55 kg
+/- 2 %
12.5 A
from +50 °C (2.5 %/K)
86 %
Yes, restart
–10°C...+70°C
0.81 kg
Scheduled delivery release: July 2012
Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified
1)
15
SITOP
in special design, for special uses
Class 2 approval
SITOP PSU300P in IP67
24 V/5 A
24 V/10 A
24 V/3.7 A
24 V/8 A
Rated input voltage
120/230 V AC
120/230 V AC
120/230 V AC
400 – 480 V 3 AC
Mains buffering
> 20 ms (at 93/187 V)
> 20 ms (at 93/187 V)
Technical data
Output voltage / current
Order No.
–– Range
Rated line frequency
SITOP flat design
6EP1333-1AL12
85...132/170...264 V AC
50/60 Hz
6EP1334-1AL12
85...132/170...264 V AC
50/60 Hz
Rated input current
2.2/1.2 A
4/2.5 A
–– Recommended miniature circuit
breaker
Rated output voltage
6 A charakt. C
10 A charakt. C
–– Inrush current (25 °C)
–– Tolerance
–– Setting range
Output current – rated value
–– Derating
Efficiency at rated values, approx.
Parallel switching
Electronic short-circuit protection
Radio interference suppression
(EN 55022)
Supply harmonics limitation
(EN 61000-3-2)
Degree of protection (EN 60529)
< 32 A
< 65 A
93…132 V/187...264 V AC
> 10 ms (at 93/187 V)
50/60 Hz
1.8/0.7 A
< 32 A
6 A charakt. C
6EP1433-2CA00
340…550 V 3 AC
15 ms (at 400 V)
50/60 Hz
2 A
< 40 A
3RV1021-1DA10
24 V DC
24 V DC
24 V DC
24 V DC
22...29 V DC
22...29 V DC
22.8…26.4 V1) DC
–
Yes1)
No
± 1 %
5 A
–
88 %
Yes
Yes, restart
± 1 %
± 3 %
10 A
–
89 %
3.7 A
–
> 80 %
Yes, restart
Yes, restart
Yes
Class B
–5 %/+3 %
8 A
–
88 %
Yes, restart
Class B
Class B
Class B
No
No
Yes
No
IP20
IP20
IP20
IP67
Installation
DIN rail
DIN rail
DIN rail
Screw mounting on SIMATIC ET 200pro system rail
Weight approx.
0.6 kg
Ambient temperature
Dimensions (WxHxD) in mm
Certification
0...+60 °C
160 x 130 x 60
CE, cULus
0...+60 °C
160 x 130 x 60
0.72 kg
CE, cULus
Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)
16
6EP1332-2BA00
0…+60 °C
70 x 125 x 125
0.75 kg
CE, cULus, Class2
1)
–25 °C...+55 °C
310 x 135.5 x 90 + connector
2.8 kg
CE
Only permissible at an ambient temperature of 0 to 50 °C
new!
new!
new!
Technical data
Output voltage / current
Order No.
Rated input voltage
–– Range
Mains buffering
Rated line frequency
Rated input current
–– Inrush current (25 °C)
–– Recommended miniature circuit
breaker
Rated output voltage
–– Tolerance
–– Setting range
Rated output current
–– Derating
Efficiency at rated values, approx.
Parallel switching
Electronic short-circuit protection
Radio interference suppression
(EN 55022)
Supply harmonics limitation
(EN 61000-3-2)
Degree of protection (EN 60529)
Ambient temperature
Installation
Dimensions (WxHxD) in mm
Weight approx.
Certification
SITOP PSU300B for battery charging
12 V/20 A
24 V/30 A
SITOP DC/DC
12 V/2.5 A
SITOP dual
2 x 15 V/3.5 A
SITOP flexi
3…52 V/10 A
6EP1424-3BA00
6EP1437-3BA20
6EP1621-2BA00
6EP1353-0AA00
6EP1353-2BA00
320…575 V 3 AC
320…575 V 3 AC
18.5...30.2 V DC
93...264 V AC
85…132 V/170...264 V AC
400 – 500 V 3 AC
> 15 ms (at 400 V)
50/60 Hz
0.7 – 0.6 A
< 18 A
6 –16 A charact. C 3-ph. coupled
or 3RV2011-1DA10
or 3RV2711-1DD10
12 V DC
± 3%
12…14 V DC
20 A
–
88%
400 – 500 V 3 AC
> 20 ms (at 400 V)
50/60 Hz
1.6 – 1.3 A
< 56 A
10 –16 A charact. C 3-ph. coupled
or 3RV2011-1DA10
or 3RV2711-1DD10
24 V DC
± 3%
24...28.8 V DC
30 A
from +60 °C (1.7%/K)
93%
Yes
Yes
Class B
Class B
Yes
Yes
24 V DC
> 5 ms
–
1.6 A
< 20 A with 20 ms
120 – 230 V AC
> 10/40 ms (at 120/187 V)
50/60 Hz
1.6/1.0 A
< 30 A, < 3 ms
10 A characteristic B
10 A characteristic C,
16 A characteristic B
12 V DC
2 x 15 V DC
± 3 %
12…14 V DC
2.5 A
–
80 %
Yes, 2 units
± 3 %
14.5…17 V DC
2 x 3.5 A
from +45 °C (2 %/K)
80 %
Yes
120 – 230 V AC
> 10 ms (at 93/187 V)
50/60 Hz
2.2/0.9 A
< 32 A
24 V DC
± 1 %
3…52 V DC
2 – 10 A (max. 120 W)
–
84 % (bei 24 V/5 A)
Yes
Yes, constant current or latching shutdown selectable
Yes, constant current
Yes, restart
Yes, constant current
Yes
No
Yes
IP 20
–25 °C...+60 °C
DIN rail
70 x 125 x 125
1.2 kg
CE (cULus in preparation)
IP 20
–25 °C...+70 °C
DIN rail
150 x 125 x 150
3.4 kg
CE, cULus
Class B
IP20
0…+60 °C
DIN rail
32,5 x 125 x 125
0.26 kg
CE, cULus
Class A
IP20
0 ...+60 °C
Normprofilschiene
75 x 125 x 125
0.75 kg
CE
Class B
IP20
0…+60 °C
DIN rail
75 x 125 x 125
0.9 kg
CE, cULus
Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)
17
SITOP expansion modules
to increase system availability
new!
Technical data
Signaling
Mains buffering
SITOP
Signaling module1)
Buffer module2)
SITOP PSE202U redundancy module
Rated input voltage
–– Range
Brief description of product/
function
Contact rating
240 V AC/6 A
Signaling module for snapping
onto the side of the basic unit
SITOP modular (6EP1x3x-3BA00,
6EP1457-3BA00); automatic
contacting, with floating signaling contacts for “Output voltage
o.k.” and “Operating readiness
o.k.”; with signal input for
switching the basic unit ON/OFF
remotely
24 V DC
24…28.8 V DC
Buffer module for mains buffering; parallel connection at
output of 24 V basic units
(6EP1x3x-3BAxx);
buffering time 200 ms at 40 A
to 1.6 s at 5 A load current;
multiplication possible through
parallel connection;
maximum buffer time 10 s.
6EP1964-2BA00
24 V DC
24 V DC
24 V DC
19…29 V DC
19…29 V DC
24…28.8 V DC
Module for redundancy mode. Floating relay contact and green LED for signaling
“Infeed 1 and 2 o.k.“, switching threshold adjustable between 20 to 25 V DC.
Decoupling and limitation of the Decoupling of two 24 V/5 A to
Decoupling of two 5 A power
supplies or one 10 A power sup- output to Class 2 limit (100 V A) 20 A power supplies or one
24 V/40 A power supply per
of 2 power supplies 5 to 40 A.
ply per redundancy module.
redundancy module.
6EP1962-2BA00
6EP1961-3BA21
Not applicable
40 A
10 A (total output current)
3.5 A3)
40 A (total output current)
Efficiency at rated values, approx. Not applicable
Not applicable
97 %
95 %
97 %
Electronic short-circuit protection Not applicable
Yes
No
No
No
Order No.
Rated output current
–– Setting range
6EP1961-3BA10
6EP1961-3BA01
Parallel switching
Not applicable
Radio interference suppression
(EN 55022)
Degree of protection (EN 60529)
Class B
IP20
IP20
IP20
IP20
IP20
Dimensions (WxHxD) in mm
25 x 125 x 125
70 x 125 x 125
30 x 80 x 100
30 x 80 x 100
70 x 125 x 125
Ambient temperature
Weight approx.
Certification
0…+ 60 °C
0.15 kg
CE, UL, CSA
Yes
Class B
0…+60 °C
1.2 kg
CE, UL, CSA, GL, ABS
Can only be combined with SITOP modular 6EP1_3_-3BA00 and 6EP1457-3BA00 power supply
Can only be combined with SITOP modular power supply 24 V DC
Max. 8 A summation current in fault case in accordance with NEC Class 2
Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)
1)
2)
3)
18
Redundancy
No
Class B
–20…+70 °C
0.125 kg
CE, cULus
No
Class B
–20…+70 °C
0.125 kg
CE, cULus, NEC class 2
No
Class B
0…+60 °C
0.5 kg
CE, cULus, cCSAus Class I Div 2,
ATEX , GL, ABS
new!
Technical data
SITOP
Order No.
Rated input voltage
–– Range
Brief description of product/
function
new!
Monitoring
SITOP PSE200U selectivity module
6EP1961-2BA11
6EP1961-2BA21
SITOP PSE200U with reporting interface
6EP1961-2BA311)
6EP1961-2BA411)
24 V DC
22…30 V DC
Module for distributing the 24 V supply over up to four load circuits and their monitoring for overload;
selective shutdown of faulty load circuits, rated current individually adjustable;
universal use for all power supplies. Individual load circuits can be switched on sequentially.
Status indication via 3-color LED per channel;
remote reset with 24 V signal and reset via
pushbutton per channel; common signaling contact.
Status indication via 3-color LED per channel;
remote reset with 24 V signal and reset via
pushbutton per channel; reporting interface for
channel-specific analysis via SIMATIC S7-function
block.
4x3A
4 x 10 A
SITOP select diagnosis module
6EP1961-2BA00
24 V DC
22…30 V DC
Status indication via 2-color LED per channel;
common reset via pushbutton, plug-in fuse
per channel; status indication via 3-color LED
per channel; common signaling contact.
Rated output current
4 x 3 A
4 x 10 A
–– Setting range
0.5…3 A
3…10 A
Parallel switching
No
Radio interference suppression
(EN 55022)
Degree of protection (EN 60529)
Class B
IP20
IP20
Dimensions (WxHxD) in mm
72 x 80 x 72
72 x 90 x 90
Efficiency at rated values, approx. 97 %
0.5…3 A
3…10 A
Weight approx.
Certification
Yes
Class B
0…+60 °C
0.2 kg
CE, UL, cURus, cCSAus Class I Div 2, ATEX
2…10 A
97 %
No
Electronic short-circuit protection Yes
Ambient temperature
4 x 10 A
0…+60 °C
CE,
(UL, cURus, cCSAus Class I Div 2, ATEX in preparation)
0.4 kg
CE, UL, cURus, cCSAus Class I Div 2, ATEX
Intended date of delivery: July 2012
Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)
1)
19
Uninterruptible power supplies –
SITOP UPS500 maintenance-free DC UPS with capacitor technology
Technical data
Maintenance-free DC UPS
SITOP
UPS500S – basic unit 15 A
Energy
2.5 kWs
Order No.
6EP1933-2EC41
UPS501S – expansion module
UPS500P – basic unit 7 A, degree of protection IP65
5 kWs
5 kWs
5 kWs
6EP1933-2EC51
6EP1935-5PG01
6EP1933-2NC01
6EP1933-2NC111)
Input voltage
24 V DC, 22…29 V, infeed from SITOP 24 V
Infeed from basic unit
24 V DC, 22.5…29 V, infeed from SITOP 24 V
Rated input current
15.2 A + approx. 2.3 A in charging mode
7 A + approx. 2 A in charging
mode
Rated output voltage
In buffer and normal mode 24 V DC +/–3 %
Rated output current
15 A, charging current 1 A (factory setting)
or 2 A selectable
Description: expansion module
for extending the buffering
time, up to 3 units can be
switched in parallel with one
UPS500S basic unit
Efficiency at rated values, approx.
97.5 %
Overload and short-circuit protection
Electronic, automatic restart
Parallel switching
No
Radio interference suppression
(EN 55022)
Class B
Degree of protection (EN 60529)
In buffer mode and normal mode 24 V DC +/–3 %
7 A, charging current 2 A
96.5 %
Electronic, automatic restart
Yes, up to 3 units
No
No
Class B
Class B
Class B
Class B
IP20
IP20
IP20
IP65
IP65
Ambient temperature
0…+60 °C
0…+60 °C
0…+60 °C
0…+55 °C
0…+60 °C
Installation
DIN rail
DIN rail
DIN rail
Screw mounting in all mounting positions
Dimensions (WxHxD) in mm
120 x 125 x 125
120 x 125 x 125
70 x 125 x 125
400 (without connector)
x 80 x 80
470 (without connector)
x 80 x 80
Weight approx.
1.0 kg
1.0 kg
0.7 kg
1.9 kg
2.2 kg
Certification
CE, cULus, ATEX, cCSAus Class I Div 2, GL, ABS
Connector set with input and output connector as well as prepared USB cable in 2 m length: Order no. 6EP1975-2ES00
Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)
1)
20
10 kWs
1)
CE
Buffering times and charging times
SITOP UPS500
SITOP UPS500S/501S configurations
UPS500P
Basic unit
2.5 kWs
5 kWs
2.5 kWs
5 kWs
2.5 kWs
5 kWs
2.5 kWs
5 kWs
5 kWs
10 kWs
Expansion modules
–
–
1 x 5 kWs
1 x 5 kWs
2 x 5 kWs
2 x 5 kWs
3 x 5 kWs
3 x 5 kWs
–
–
Total energy
2.5 kWs
5 kWs
7.5 kWs
10 kWs
12.5 kWs
15 kWs
17,5 kWs
20 kWs
5 kWs
10 kWs
0.5 A
134 sec
236 sec
390 sec
478 sec
632 sec
748 sec
851 sec
1007 sec
284 sec
647 sec
0.8 A
90 sec
167 sec
266 sec
346 sec
440 sec
527 sec
580 sec
706 sec
190 sec
435 sec
1 A
75 sec
138 sec
219 sec
296 sec
365 sec
414 sec
490 sec
572 sec
153 sec
351 sec
2 A
38 sec
76 sec
122 sec
156 sec
203 sec
230 sec
265 sec
306 sec
80 sec
152 sec
3 A
26 sec
52 sec
82 sec
106 sec
136 sec
159 sec
186 sec
213 sec
53 sec
108 sec
4 A
19 sec
39 sec
61 sec
81 sec
101 sec
120 sec
139 sec
160 sec
40 sec
84 sec
5 A
15 sec
31 sec
49 sec
65 sec
81 sec
95 sec
111 sec
130 sec
30 sec
68 sec
6 A
12 sec
26 sec
40 sec
55 sec
67 sec
80 sec
94 sec
106 sec
25 sec
57 sec
7 A
10 sec
21 sec
34 sec
47 sec
58 sec
69 sec
81 sec
82 sec
21 sec
49 sec
8 A
8 sec
18 sec
29 sec
40 sec
50 sec
59 sec
69 sec
79 sec
–
–
10 A
6 sec
15 sec
23 sec
32 sec
39 sec
47 sec
54 sec
62 sec
–
–
12 A
4 sec
12 sec
19 sec
26 sec
32 sec
38 sec
44 sec
52 sec
–
–
15 A
3 sec
9 sec
14 sec
20 sec
25 sec
30 sec
35 sec
40 sec
–
–
2 A
54 sec
120 sec
158 sec
223 sec
263 sec
318 sec
355 sec
417 sec
130 sec
360 sec
1 A
110 sec
205 sec
311 sec
425 sec
503 sec
625 sec
695 sec
816 sec
–
–
Buffering times
Load current
Charging times
Charging current
Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)
21
Uninterruptible power supplies
SITOP DC UPS with battery modules for bridging longer power failures
Technical data
SITOP Output voltage /
current
Order No.
–– with serial interface
–– with USB interface
Input voltage
Rated input current
Rated output voltage
Rated output current
Efficiency at rated
values, approx.
Overload and shortcircuit protection
Parallel switching
SITOP DC UPS, for longer power failures
DC UPS module
24 V/6 A
Dimensions (WxHxD)
in mm
Weight approx.
Certification
DC UPS module
24 V/40 A
DC UPS battery module
24 V/1.2 Ah 1)
DC UPS battery module
24 V/3.2 Ah1)
DC UPS battery module
24 V/7 Ah1)
for DC UPS module 6 A
for DC UPS module 6 A
and 15 A
6EP1935-6MD11
for DC UPS module 6 A, 15 A and 40 A
(for > 30 A to 40 A two units in parallel)
6EP1935-6ME21
6EP1935-6MF01
6EP1931-2FC21
6EP1931-2EC21
6EP1931-2DC21
6EP1931-2EC31
6EP1931-2DC31
6EP1931-2FC42
6EP1931-2EC42
6EP1931-2DC42
24 V DC, 22...29 V, infeed from 24 V SITOP power supply:
6EP1935-6MC01
6 A + approx. 0.85 A
15 A + approx. 1 A
40 A + approx. 2.6 A
with empty battery
with empty battery
with empty battery
24 V DC (upstream SITOP device or battery), charging voltage: 27.0 V
Charging current
Charging current
max. 0.3 A
max. 0.8 A
24 V DC, 22...27.0 V DC (no-load operation)
From 24 V / 0.6 A
From 24 V/5 A
From 24 V/10 A
6 A, charging current:
15 A, charging current:
typ. 0.4 A
typ. 0.7 A
Buffer mode: 94 %,
Buffer mode: 96 %,
Standby mode: 95 %
Standby mode: 96 %
Electronic, automatic restart
40 A, charging current:
typ. 2 A
Buffer mode: 97 %,
Standby mode: 97 %
No
No
Radio interference
Class B
suppression (EN 55022
Degree of protection (EN IP20
60529)
Ambient temperature
–25…+60 °C
Installation
DC UPS module
24 V/15 A
DIN rail
50 x 125 x 125
0.4 kg
Recomm. end-of-charge voltage: 26.4…27.3 V DC (> +20 °C), 27.3…29.0 V DC (< +20 °C)
22
Charging current
max. 1.75 A
Charging current
max. 3 A
6 A
15 A
30 A
30 A
Not applicable
Not applicable
Not applicable
Not applicable
No
Installed battery fuse:
7.5 A/32 V
Yes
15 A/32 V
Yes
30 A/32 V
Yes
30 A/32 V
Yes
IP20
IP20
IP00
IP00
IP00
IP00
–25...+60 °C
–25…+60 °C
-10…+50 °C
-10…+50 °C
50 x 125 x 125
102 x 125 x 125
Class B
DIN rail
0.4 kg
Class B
DIN rail
DIN rail or wall mounting
96 x 106 x 108
190 x 151 x 82
1.1 kg
1.8 kg
3.2 kg
-10…+50 °C
-10…+50 °C
Wall mounting
Wall mounting
6.0 kg
9.0 kg
186 x 168 x 121
253 x 168 x 121
CE, cULus, ATEX; cCSAus CE, cULus, ATEX; cCSAus CE, cULus, ATEX; cCSAus CE, cURus, ATEX; cCSAus CE, cURus, ATEX; cCSAus CE, cURus, ATEX; cCSAus CE, cURus, ATEX; cCSAus
Class I Div 2, GL, ABS
Class I Div 2, GL, ABS
Class I Div 2, GL, ABS
Class I Div 2, GL, ABS
Class I Div 2, GL, ABS
Class I Div 2, GL, ABS
Class I Div 2, GL, ABS
Also available: High-temperature battery module 24 V / 2.5 Ah (6EP1935-6MD31) for ambient temperatures from –40 to +60 °C
Technical data subject to nominal input voltage value and +25 °C ambient temperature (unless stated otherwise)
1)
DC UPS battery module
24 V/12 Ah1)
Selection table battery modules
and buffer times
Load current
Battery module 1.2 Ah
(6EP1935-6MC01)
Battery module 3.2 Ah
(6EP1935-6MD11)
Battery module 7 Ah
(6EP1935-6ME21)
Battery module 12 Ah
(6EP1935-6MF01)
Battery module1) 2.5 Ah
(6EP1935-6MD31)
1 A
30 min.
2.5 h
6h
11 h
2h
2 A
11 min.
45 min.
2.5 h
5h
45 min.
3 A
4 min.
25 min.
1.5 h
3h
30 min.
4 A
2 min.
20 min.
45 min.
2h
20 min.
6 A
1 min.
10 min.
30 min.
1h
13 min.
8 A
–
4 min.
20 min.
40 min.
9 min.
10 A
–
1.5 min.
15 min.
30 min.
7 min.
12 A
–
1 min.
10 min.
25 min.
5.5 min.
14 A
–
50 s
8 min.
20 min.
4.5 min.
16 A
–
40 s (15 A)
6 min.
15 min.
4 min.
20 A
–
–
3 min.
11 min.
–
25 A
–
–
2 min.
9 min.
–
30 A
–
–
1 min.
6 min.
–
High-temperature battery module for ambient temperatures from –40 to +60 °C
Buffer time determination was based on the discharging time of new and completely charged battery modules
with a minimum battery temperature of +25 °C until decrease of the battery voltage to 21 V
(with voltage drops in the DC UPS, approx. 20.4 V DC remain for the load)
1)
23
Further information
More about SITOP:
www.siemens.com/sitop
Information material for downloading:
www.siemens.com/sitop-infomaterial
Easy selection of the suitable power supply unit with the SITOP selection tool:
www.siemens.com/sitop-selection-tool
Manuals for downloading:
www.siemens.com/sitop/manuals
CAx data (2D, 3D, circuit diagram macro) for downloading:
www.siemens.com/sitop-cax
Compile all CAx data using the CAx online generator:
www.siemens.com/cax
Order electronically over the Internet using the Industry Mall:
www.siemens.com/industrymall
You can find your personal contact at:
www.siemens.com/automation/partner
Siemens AG
Industry Sector
Industry Automation
P.O. Box 48 48
90026 NUREMBERG
GERMANY
Subject to change without prior notice 04/12
Order No. E80001-A2650-P310-X-7600
Dispo 46305
NC/120083 MI.SC.ST.XXXX.52.2.02/WS 04125.0
Printed in Germany
© Siemens AG 2012
The information provided in this brochure contains merely general descriptions or
characteristics of performance which in actual case of use do not always apply as
described or which may change as a result of further development of the products.
An obligation to provide the respective characteristics shall only exist if expressly
agreed in the terms of contract.
All product designations may be trademarks or product names of Siemens AG or
supplier companies whose use by third parties for their own purposes could violate
the rights of the owners.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement