Pump House 2016 Catalogue

Pump House 2016 Catalogue
Pump House
Refrigeration, Air Conditioning & Renewable Products Guide
Easy~Fit
Fixings
Flexi
Install +
Partners
PH Family PH Motors
Portable
Service +
Squeezy
all under one roof...
Pump House, Glaisdale Drive East, Nottingham NG8 4LY
www.pumph.co.uk
0115 900 5858
[email protected]
Welcome
It gives me great pleasure to present
our new look Pump House Catalogue.
“
Welcome to our new look catalogue for
2016. I’m proud to introduce our team who
are featured throughout the following pages. The
Pump House team are here to ensure we serve
you with excellence.
“
Dave Bass
Managing
Director
The new fixings and isolator range add a new
dimension to our product lines, along with exciting
additions to the Flexi range; not forgetting the
launch in spring of our window rattler using R32
environmentally friendly refrigerant.
We hope you enjoy our products better than ever
and look forward to your continued support.
Many thanks from all of us at Pump House!
s
s
a
B
Dave
Contents
Condensate Removal Pump Selection Chart
Section 1
Condensate Pump Solutions and Accessories
4-5
VCC-20S 1 Litre Tank Pump
PH-1L & PH-1L-SS Tank Pump
VCMA-20S 2 Litre Tank Pump
VCMX-20S 2 Litre Tank Pump
PH-2L 2 Litre Tank Pump
VCL-24S Heavy Duty Tank Pump
VCL-45S Heavy Duty Tank Pump
EC-400 Mini Pump
EC-1 Mini Pump
8
9
10
11
12
13
14
15
16
EC-1 Kit Mini Split Pump in Trunking
DE-05-FD Flowatch® Mini Pump in Trunking
TPS, TPT, TPR Peristaltic Pumps
PH-3.8L-HW Hot Water Pump
PH-5L-HW Heavy Duty Hot Water Pump
DCP-30A/E/V Dairy Cabinet Pumps
DCP-35A Supermarket Cabinet Pump
ET-150 Evaporator Tray
Pump Accessories
17
18
20
21
22
23
24
25
26-27
Easy~Fit Condensing Guards
Easy~Fit 500 Series Condensing Guards
Easy~Fit 750 Series Condensing Guards
Easy~Fit 900 Series Condensing Guards
Easy~Fit VRV/VRF Condensing Guards
Easy~Fit Wooden Guards
Easy~Fit Protective Housing
Easy~Fit Economy Bracket
Easy~Fit Type 2 Stainless Steel Brackets
Easy~Fit Cantilever Arms
Easy~Fit Cantilever Arm Kits
Easy~Fit Type 1 Brackets
Easy~Fit Type 2 Brackets
Easy~Fit Type 3 Brackets
32
33
34
35
36
37
38
39
40
41
42
43
44
45
Easy~Fit Condensate Collection Trays
Inaba Denko Trunking
ASHP Trunking
Flexi Lite Slab and Foot Kit
Mounting Blocks
Ultralite® Slabs
Rubber and Cork Mounting Strips
EVA™ Pads
Flexi H Frames
Flexi Frames
Flexi Foot with Strut Flexi Fix Clamp/Flexi Fix Pack
Flexi Foot Universal Portables (Air Conditioning Units)
Through the Wall Air Conditioner
46
47-49
49
50
51
52
53
54
55
56
57
58
59
60
61
Section 2
Protecting, Mounting, Supporting and Portables
Section 3
Accessories, Ancillaries, Tools and Maintenance
Braided Hose
64
Clear Vinyl Hose
65
Plastic Hose and Tube Cutter 65
Flexible Hose
66
Through the Wall Kit
67
Rotary Enclosed Isolators
68
Copper Fittings
69-78
Brass Fittings
79-80
Access Fittings
81
Klo-Shure® Series 7 Clamps
82
Cushion Clamps
83
Rapid Positioning Clips/Studded Clips
84
Insul Clips/Cable Tie Channel Clips
85
Threaded Rod Hangers/Flow and Return Clamps
86
Vibration Absorbers
87
Multi-Fit Fan Motors
Tangential Fan Motors
High Efficiency ECM Fan Motors
Fan Accessories Axial Fan Motors
Pro Range and G2G Range
Aerosol and Odour Elimination Products
Hand Held and Power Sprayers
Diversi-Flush™ Kit
Gallo Gun and Nitrogen Purge Tool
Lubricants and Sealants
Line Seal Kit/Copper Spun Driers
Refrigerant ID Labels
E-Lite Plastic Equipment Pads
Line Taps
Tape, Cloths and Mats
88
89
90
91
92
93
94
95
96
97
98-99
100
101
101
102-103
104-105
Channel and Channel Accessories
Cable and Basket Tray
Fasteners – Washers
Fasteners – Nuts
Fasteners – Screws Fasteners – Anchor Bolts
Fasteners – Plus
115-116
117
118
Section 4
Fixings
108-109
110-111
112
113-114
Condensate Removal – Pump Selection Chart
Tank Condensate Pumps
Part Code
Max Head
Max Flow
Description/Application
Page
VCC-20S
4.3m
294 LPH
When space is your issue, this low profile tank pump
is an ideal choice
Page 8
PH-1L
6m
270 LPH
Our own branded 1 litre tank pump solves the problem
of space, cost and reliability
Page 9
VCMA-20S
4.3m
294 LPH
A world-leading and reliable 2 litre Little Giant
Tank Pump
Page 10
VCMX-20S
4.8m
284 LPH
Easier to install, service and maintain, this pump has
the qualities to outlast and outsmart them all
Page 11
PH-2L
4.8m
300 LPH
‘Willis’ is our low cost tank pump option, no flash
colours needed but built to last
Page 12
VCL-24S
5.9m
900 LPH
This trouble-free 3.8 litre pump is a solution to
heavy duty applications
Page 13
VCL-45S
10.5m
1560 LPH
Robust, with a flow rate of 1560 LPH this is our
largest tank pump within our range
Page 14
Part Code
Max Head
Max Flow
Description/Application
Page
EC-400
9m
14 LPH
Small, strong and rapid mini pump option for fan coils
and split air conditioners
Page 15
EC-1
10m
10 LPH
Quiet, small and reliable mini pump for retrofits with
or without trunking
Page 16
EC-1K
10m
10 LPH
Long lasting, quiet and easy to install pump in trunking
with 20mm extra elbow space
Page 17
DE-05-FD
10m
10 LPH
The low decibel rating and clean white trunking of this
pump makes is a preferred choice
Page 18
Mini Condensate Pumps
4
www.pumph.co.uk 0115 900 5858
Condensate Removal – Pump Selection Chart
Peristaltic Condensate Pumps
Part Code
Max Head
Max Flow
Description/Application
Page
TPS
14m
9.5 LPH
The peristaltic pump with sensor is ideal for mini split or
cassette air conditioning units up to 12kw
Page 20
TPT
14m
9.5 LPH
Another peristaltic model with a temperature sensor to
activate the unit
Page 20
TPR
14m
9.5 LPH
This model collects condensate in a reservoir with a
high level alarm
Page 20
Part Code
Max Head
Max Flow
Description/Application
Page
PH-3.8L-HW
8m
312 LPH
‘Edwin’ is our high temperature condensate tank pump
made to withstand 100 degree temperatures
Page 21
PH-5L-HW
20m
1920 LPH
‘Granville’ is our heavy duty giant incorporating thermal
overload protection. Ideal for humidifiers, steam ovens
and T&P
Page 22
Part Code
Max Head
Max Flow
Description/Application
Page
DCP-30A
23m
700 LPH
Our standard supermarket pump ‘Vincent’ is a must
have – this low profile pump has a high level alarm and
multiple inlet options
Page 23
DCP-30E
23m
700 LPH
This supermarket pump version ‘Clarence’ comes
without a lid and a high level alarm facility saving on
cost and installation time
Page 23
DCP-30V
23m
700 LPH
‘Michael’ can be located vertically behind a retail display
or cold room, it comes with a high level alarm and
mounting brackets
Page 23
DCP-35A
35m
280 LPH
‘William’ joins our range of display case pumps for
supermarkets. This ABS-cased pump provides
outstanding value
Page 24
Hot Water Pumps
Dairy Cabinet Pumps
5
Tank Condenser Pump
Condensate
Pump Solutions
and Accessories
Meet the Team...
Pete Cureton
Internal Sales
Manager
Claire Gretton
Sales
Representative
Craig Peebles
Sales Director
June Richardson
Sales & Marketing
Manager
Section 1
VCC-20S 1 Litre Tank Pump
PH-1L & PH-1L-SS Tank Pump
VCMA-20S 2 Litre Tank Pump
VCMX-20S 2 Litre Tank Pump
PH-2L 2 Litre Tank Pump
VCL-24S Heavy Duty Tank Pump
VCL-45S Heavy Duty Tank Pump
EC-400 Mini Pump
EC-1 Mini Pump
6
8
9
10
11
12
13
14
15
16
EC-1 Kit Mini Split Pump in Trunking
DE-05-FD Flowatch® Mini Pump in Trunking
TPS, TPT, TPR Peristaltic Pumps
PH-3.8L-HW Hot Water Pump
PH-5L-HW Heavy Duty Hot Water Pump
DCP-30A/E/V Dairy Cabinet Pumps
DCP-35A Supermarket Cabinet Pump
ET-150 Evaporator Tray
Pump Accessories
www.pumph.co.uk 0115 900 5858
17
18
20
21
22
23
24
25
26-27
Condensate Pump Solutions and Accessories
NEW & EXCLUSIVE
DCP-30A/E/V
Dairy Cabinet Pumps
PH Family
Page 23
A supermarket must have!
The market-leading British made Pump
House dairy cabinet range or fondly
referred to as ‘Vincent’ offers an unrivalled
solution to supermarket refrigeration. With
a height of only 76mm this stainless steel,
easy to service pump delivers a complete
solution. Available in 3 models: ‘Vincent’
DCP-30A, ‘Clarence’ DCP-30E and
‘Michael’ DCP-30V. Ideal for supermarket
refrigeration cabinets.
DCP-30A
DCP-30V
DCP-35A
Supermarket Cabinet Pump
PH Family
Page 24
ng
i
m
Co on!
so
Retail refrigeration cabinet
condensate gone!
Designed to fit under retail refrigeration cabinets,
‘William’ the Pump House DCP-35A offers
excellent performance and outstanding value
making it ideal for retail refrigeration cabinets.
7
Tank Condensate Pumps
125mm
125mm
VCC-20S
1 Litre
Tank Pump
Partners
300mm
When space is your issue – look no further!
Low profile at 125mm, this 1 litre tank pump from world-leading Little Giant offers proven
reliability. Ideal for cassette air conditioning and refrigeration dairy decks.
Features
• Supplied with both 3/8" and 1/4"
check valve outlets
• High durability and reliability
• Easy to install and low maintenance
• Inlet height 45mm
• Ideal for cassette and ducted a/c’s
and single deck dairy cabinet pump
• One year warranty
8
METRES HEAD
6
The Package
• 1.1 Litre Tank Pump
• 3/8" Check Valve • 1/4" Check
Valve • Spare Inlet Cap
• Installation Instructions •
4.5
3
1.5
00
Related Products
75
150
225
300
CAPACITY (LPH)
Max Flow
Tank Cap.
294 LPH
1.1 litres
Decibel
Rating
Non-Return Valves
PAGE 27
Braided Hose
PAGE 64
Vinyl Hose
Cassette Adaptors
PAGE 65
PAGE 27
58-62 dB(A)
Part Code
Max. Lift
Discharge
Size
PSI
Watts
IP
Amps
Volts
Hz
VCC-20S
4.3m
3/8" / 1/4"
7.4
60 W
20
0.6 A
240 V
50 Hz
High Level
Alarm
Inlet Height
Weight
Cable Length
Drink Cycle
On Level
Off Level
Reserve
Before
Overflow
Alarm Level
48V / 5A
44mm
2.4kg
1.8m
330ml
25mm
11mm
340ml
30mm
www.pumph.co.uk 0115 900 5858
Tank Condensate Pumps
PH-1L and
PH-1L-SS
1 Litre
Tank Pump
122mm
134mm
220mm
PH Family
Pump House presents ‘John’
Space, cost and reliability are often issues. This Pump House low cost tank pump offers the
solution. Ideal for cassette air conditioning and refrigeration dairy decks.
6
• High discharge head of 6 metres
• Quiet operation
0m –cycle
258 litres per hour
• 300ml drink
– 225
per hour
• Quality 2m
design
and litres
engineered
product4m – 207 litres per hour
6mwarranty
– 84 litres per hour
• One year
METRES HEAD
Features
4.5
Braided Hose
Cassette Adaptors
Non-Return Valve 1/4"
3
PAGE 64
PAGE 27
PAGE 27
1.5
0
The Package
Related Products
0
75
150
225
300
CAPACITY (LPH)
• 1 Litre Tank Pump • 3/8" Check
Valve • 1/4" Check Valve
• Installation Instructions •
Max. Flow
Tank Cap.
270 LPH
0.8 litre
Decibel
Rating
43 dB(A)
Part Code
Max. Lift
Discharge
Size
PSI
Watts
IP
Amps
Volts
Hz
PH-1L and
PH-1L-SS
6m
3/8"
9.8
75 W
20
0.64 A
240 V
50 Hz
High Level
Alarm
Inlet Height
Weight
Cable Length
Drink Cycle
On Level
Off Level
Reserve
Before
Overflow
Alarm Level
Volt Free
45mm
2kg
1.8m
300ml
25.5mm
13.5mm
175ml
29mm
PH-1L-SS only
Easy~Fit
Fixings
Flexi
Install +
Partners PH Family PH Motors Portable Service +
Squeezy
9
Tank Condensate Pumps
178mm
VCMA-20S
2 Litre
Tank Pump
Partners
288mm
127mm
Unrivalled since 1999!
This world-leading Little Giant tank pump offers proven and unrivalled reliability. Ideal for
cassette air conditioning, refrigeration, de-humidifiers and gas boiler models available.
Features
• World-leading brand for 2 litre
tank pumps
• Supplied with both 3/8" and 1/4"
check valve outlets
• High-durability and reliability
• Easy to install and low maintenance
• Ideal for cassette and ducted a/c’s
• Low returns rate
• One year warranty
10
METRES HEAD
6
The Package
• 2 Litre Tank Pump • 3/8"
Check Valve • 1/4" Check Valve
• Spare Inlet Cap • Installation
Instructions •
4.5
3
1.5
00
Related Products
75
150
225
300
CAPACITY (LPH)
Max Flow
Tank Cap.
294 LPH
1.9 litres
Non-Return Valves
PAGE 27
Braided Hose
Cassette Adaptors
PAGE 64
PAGE 27
Decibel
Rating
58-62 dB(A)
Part Code
Max. Lift
Discharge
Size
PSI
Watts
IP
Amps
Volts
Hz
VCMA-20S
4.3m
3/8" / 1/4"
7.4
60 W
20
0.6 A
240 V
50 Hz
High Level
Alarm
Inlet Height
Weight
Cable Length
Drink Cycle
On Level
Off Level
Reserve
Before
Overflow
Alarm Level
48V / 5A
92mm
2.4kg
1.8m
750ml
61mm
32mm
640ml
71mm
www.pumph.co.uk 0115 900 5858
Tank Condensate Pumps
165mm
VCMX-20S
2 Litre
Tank Pump
Partners
122mm
260mm
No pump is easier to install or service...
The NXTGen out smarts and outlasts them all. Designed by engineers and Little Giant, a
partnership for success. Ideal for cassette air conditioning, refrigeration and boilers.
Features
• 1/4" turn, easy service check
valve (both 3/8" and 1/4" supplied
with pump)
• Patent-pending cooling design
extends life
• External test/run switch
• Rubber feet to absorb vibration
• Slimmer footprint offers flexibility in
tight spaces
• Removable high level alarm switch
• Two year warranty
METRES HEAD
6
The Package
• 2 Litre Tank Pump • 4 x Rubber Feet
• Wall Mounting Bracket
• 3/8" Twist Lock Check Valve
• 1/4" Twist Lock Check Valve
• Removable High Level Alarm •
4.5
3
1.5
0
0
75
150
225
300
CAPACITY (LPH)
Max. Flow
Tank Cap.
284 LPH
1.9 litres
Related Products
Non-Return Valves
PAGE 27
Braided Hose
Cassette Adaptors
PAGE 64
PAGE 27
Decibel
Rating
58 dB(A)
Part Code
Max. Lift
Discharge
Size
PSI
Watts
IP
Amps
Volts
Hz
VCMX-20S
4.8m
3/8" / 1/4"
9.1
75 W
20
0.6 A
230 V
50/60 Hz
High Level
Alarm
Inlet Height
Weight
Cable Length
Drink Cycle
On Level
Off Level
Reserve
Before
Overflow
Alarm Level
48V / 5A
86mm
1.9kg
1.7 metres
350ml
42mm
27.5mm
460ml
58.5mm
Easy~Fit
Fixings
Flexi
Install +
Partners PH Family PH Motors Portable Service +
Squeezy
11
Tank Condensate Pumps
180mm
PH-2L
2 Litre
Tank Pump
PH Family
130mm
290mm
Pump House presents ‘Willis’ our low cost tank pump...
Manufactured by Little Giant, this reliable tank pump comes with no flash colours and is built
to last. Ideal for cassette air conditioning and refrigeration.
Features
1/4" and 3/8" non-return valve outlet
Easy to install
Low maintenance
Ideal for cassette and ducted a/c’s
Two year warranty
METRES HEAD
•
•
•
•
•
6
• 2 Litre Tank Pump • 3/8" Check
Valve • 1/4" Check Valve • Installation
Instructions •
4.5
3
Related Products
1.5
00
12
The Package
75
150
225
300
CAPACITY (LPH)
Decibel
Rating
Non-Return Valves
PAGE 27
Braided Hose
Cassette Adaptors
PAGE 64
PAGE 27
Max. Flow
Tank Cap.
300 LPH
2 litres
Part Code
Max. Lift
Discharge
Size
PSI
Watts
IP
Amps
Volts
Hz
PH-2L
4.8m
3/8" / 1/4"
7.4
60 W
20
0.6 A
240 V
50 Hz
High Level
Alarm
Inlet Height
Weight
Cable Length
Drink Cycle
On Level
Off Level
Reserve
Before
Overflow
Alarm Level
Volt Free
92mm
2.4kg
1.8m
750ml
61mm
32mm
640ml
71mm
60 dB(A)
www.pumph.co.uk 0115 900 5858
Heavy Duty Tank Pumps
263mm
VCL-24S
Heavy
Duty Tank
Pump
Partners
305mm
150mm
Trouble free!
This heavy duty tank pump manufactured by Little Giant offers a trouble free solution for
heavy duty applications. If you need high flow rates, along with high lift... no problem! Ideal
for air conditioners, refrigeration, de-humidifiers and boilers.
Higher flow rate – 900 LPH
High discharge head – 5.9m
Trouble free, centrifugal pump
Ideal for cassette and ducted a/c’s
One year warranty
The Package
METRES HEAD
•
•
•
•
•
8
Features
Related Products
6
4
Non-Return Valves
PAGE 27
Braided Hose
Cassette Adaptors
PAGE 64
PAGE 27
2
0
0
• 3.8 Litre Tank Pump • 3/8" Check
Valve • 1/4" Check Valve • Installation
Instructions •
250
500
750
1000
CAPACITY (LPH)
Max. Flow
Tank Cap.
900 LPH
3.8 litres
Decibel
Rating
58-62 dB(A)
Part Code
Max. Lift
Discharge
Size
PSI
Watts
IP
Amps
Volts
Hz
VCL-24S
5.9m
3/8" / 1/4"
10.4
150 W
20
1.0 A
240 V
50 Hz
High Level
Alarm
Inlet Height
Weight
Cable Length
Drink Cycle
On Level
Off Level
Reserve
Before
Overflow
Alarm Level
48V / 5A
149mm
2.4kg
1.8m
2.2 litres
90mm
66mm
1.35 litres
105mm
Easy~Fit
Fixings
Flexi
Install +
Partners PH Family PH Motors Portable Service +
Squeezy
13
Heavy Duty Tank Pumps
267mm
VCL-45S
Heavy
Duty Tank
Pump
Partners
150mm
305mm
Heavy duty is no longer a problem!
This robust Little Giant tank pump offers the highest flow and lift rate at 1560 LPH with a
10.5m lift. These pumps are built to move large quantities of condensate water fast. Ideal
for cassette air conditioning, refrigeration and de-humidifiers.
• Higher flow rate – 1560 LPH
• High discharge head – 10.5m
• Trouble free, centrifugal pump
• Ideal for cassette and ducted a/c’s
• One year warranty
The Package
METRES HEAD
12
Features
Braided Hose
Cassette Adaptors
9
PAGE 64
PAGE 27
6
3
00
• 3.8 Litre Tank Pump • 3/8" Check
Valve • 1/4" Check Valve • Installation
Instructions •
14
Related Products
450
900
1350
1800
CAPACITY (LPH)
Max. Flow
Tank Cap.
1560 LPH
3.8 litres
Decibel
Rating
58-62 dB(A)
Part Code
Max. Lift
Discharge
Size
PSI
Watts
IP
Amps
Volts
Hz
VCL-45S
10.5m
3/8" / 1/4"
10.4
170 W
20
1.8 A
240 V
50 Hz
High Level
Alarm
Inlet Height
Weight
Cable Length
Drink Cycle
On Level
Off Level
Reserve
Before
Overflow
Alarm Level
48V / 5A
144mm
6.4kg
0.9m
2.2 litres
90mm
33mm
1.35 litres
105mm
www.pumph.co.uk 0115 900 5858
Mini Condensate Pumps
110mm
EC-400
Mini
Pump
45mm
Partners
35mm
Small, strong and rapid
This fully automatic mini pump from Little Giant offers a solution where gravity drainage is not
possible. Ideal for fan-coil and split air conditioning, small enough to fit in the unit or placed
in trunking.
12
• Versatile
• Ideal for wall-mounted, ceiling and
fan coil split a/c’s
• One year warranty
METRES HEAD
Features
9
14 LPH*
Inaba Trunking
6
PAGE 47-49
The Package
3
0
Max. Flow
Related Products
0
Decibel
Rating
3
6
9
12
CAPACITY (LPH)
• Mini Condensate Pump • Syphon
• Tubing • Anti-Vibration Pads
• Installation Instructions •
58 dB(A)
* Operating flow should not exceed
50% of pump performance
Part Code
Max. Lift
Discharge
Size
Watts
IP
Amps
Volts
Hz
High Level
Alarm
50 Hz
48V / 5A
EC-400
12m
1.4"
20 W
20
0.1 A
230 V
(Pump only)
Weight
Reservoir
Dimensions
Reservoir
Dimensions
Reservoir
Dimensions
Width
Other Components
Dimensions
Suction Tubing
Other Components
Dimensions
Vent Tubing
Other Components
Dimensions
A/C Drain Tubing
0.4kg
37mm
80mm
35mm
1m x 4mm
150mm x 4mm
75mm x 13mm
Easy~Fit
Fixings
Height
Flexi
Length
Install +
Partners PH Family PH Motors Portable Service +
Squeezy
15
Mini Condensate Pumps
104mm
EC-1
Mini
Pump
Partners
58mm
46mm
Quiet, small and reliable...
This evolution of the mini pump from Little Giant, offers an easy to install and super quiet
solution to condensate removal from mini-split air conditioners. Ideal for fan-coil and split air
conditioning. Retrofits mini pumps with or without trunking.
• Removes condensate from ductless
mini-split wall and ceiling mounted
air conditioners and concealed fan
coil equipment
• Quiet operation -21 dB(A)
• Elastomeric mounting grommets
on pump housing bracket
• Elastomeric passive vibration isolator
used to dampen pump vibration
• Wall bracket for pump and
reservoir included
• Thermal protection: 80°c
• 1.5m power cable
• 1m cable between the pump
and reservoir
• Ambient temperature range: 0°c-60°c
• Maximum water temperature: 60°c
Reservoir Features
• Clear reservoir
• On/off level sensors with high water
safety sensor
• Extra large filter screen
• Drain hose adaptor (14mm, 16mm,
18mm and 20mm)
• Simple to open and maintain
the reservoir
METRES HEAD
Features
12
9
6
3
00
2.5
5
7.5
CAPACITY (LPH)
10
Related Products
Braided Hose
Cassette Adaptors
Inaba Trunking PAGE 64
PAGE 27
PAGE 47-49
Max. Flow
10 LPH
Decibel
Rating
21 dB(A)
Reservoir
Dimensions
Reservoir
Dimensions
Reservoir
Dimensions
84mm
46mm
38mm
Height
Length
Part Code
Max. Lift
Discharge
Size
IP
Amps
Volts
Hz
High Level
Alarm
EC-1
10m
1.4"
20
0.1 A
230 V
50 Hz
NC* 230V / 8A
Width
Weight
(Pump only)
0.8kg
* NC – Normally Closed
16
www.pumph.co.uk 0115 900 5858
Pump in Trunking
EC-1 Kit
Mini Split
Pump in
Trunking
Partners
A mini pump in trunking which can be serviced with ease –
look no further!
This Little Giant pump with trunking has been designed to last. Easy to install, quiet and
simple to service. Size does matter, with 20mm additional elbow space for pipe work.
Ideal for mini split air conditioning.
Features
• Three-piece matching white trunking
supplied with protective film – length,
arm and elbow
• Pump has unique anti-vibration
qualities
• Push and click connections from
pump to reservoir
• Low noise level – 21 dB(A)
• Generous space in elbow duct for
refrigeration pipes
• Easy to service, maintain and install
• Clear reservoir has 3 outlets and
can be easily serviced
• Multiple accessories supplied as
standard in the box
Related Products
Braided Hose
Squeezy Fit PAGE 64
PAGE 86
The Package
• Mini Pump • Reservoir • Trunking
Length • Trunking Arm • Trunking
Elbow • Accessories •
Max. Flow
10 LPH
Decibel
Rating
21 dB(A)
Pump Only
Dimensions
Pump Only
Dimensions
Pump Only
Dimensions
104mm
46mm
58mm
Height
Width
Length
Reservoir
Dimensions
Reservoir
Dimensions
Reservoir
Dimensions
Internal Trunking
Dimensions
Internal Trunking
Dimensions
Internal Trunking
Dimensions
84mm
46mm
38mm
53mm
76mm
800mm
Height
Length
Width
Height
Length
Width
Part Code
Max. Lift
Discharge
Size
IP
Amps
Volts
Hz
High Level
Alarm
(Pump only)
Weight
EC-1 Kit
10m
1.4"
20
0.1 A
230 V
50 Hz
NC* 230V / 8A
0.8kg
* NC – Normally Closed
Easy~Fit
Fixings
Flexi
Install +
Partners PH Family PH Motors Portable Service +
Squeezy
17
Pump in Trunking
DE-05-FD
Flowatch
Mini Pump
in Trunking
800mm
®
Partners
Flowatch Design®
80mm
An easy to install mini pump with trunking. Just one 90 degree bend is required to secure
the pipes within the elbow. Ideal for mini split air conditioning.
7
Features
METRES HEAD
• Quiet – low decibel rating of
<21dB(A)
• Attractive – smooth clean white
trunking to match most wallmounted systems
• Spacious – ample room for 3/8"
and 5/8" pipes
• Proven pump reliability with 10 years
of sales in the global market
• Quick push-fit electrical connections
• Replacement pump and parts
available
• Three year warranty
The Package
6
• Mini FLOWATCH® Condensate Pump
with Detection Unit • 80mm x 800mm
Duct • Fixing Plate (Reversible Left or
Right) and Elbow Cover • Complete
Fixing Accessories •
5
4
3
2
1
0
0
Max. Flow
12 LPH
3
6
9
12
CAPACITY (LPH)
15
Related Products
Braided Hose
Squeezy Fit PAGE 64
PAGE 86
Decibel
Rating
<21dB(A)
Part Code
Max. Lift
Suction Lift
Outlet Hose
High Level Alarm
Duct Dimensions
Duct Dimensions
DE-05-FD
10m*
2m
6mm
240V / 8A
800mm
80mm
Length
Width
* We recommend using this pump at no greater than 10m head.
18
www.pumph.co.uk 0115 900 5858
Peristaltic Pumps
TPS, TPT,
TPR
Peristaltic
Pumps
115mm
Partners
96mm
98mm
Need a Suction Lift?
With an amazing 9.5 LPH flow, the peristaltic range manufactured by Little Giant offers
all installation possibilities. This pump is available in 3 models and comes with either a
temperature sensor, compressor signal reservoir or alarm. Ideal for mini split or cassette air
conditioning units up to 12kw.
• Supplied with a spare replacement
peristaltic tube
• Vent-free motor housing reduces
noise
• IP 52 housing prevents damage
from dust and debris
• Service kit available
• Extension sensor cables are
available to enable the pump to be
located up to 6 metres from the
indoor unit
• One year warranty on the pump
and tube
20
METRES HEAD
12
Features
Related Products
9
6
Service Kit
PAGE 26
Braided Hose
PAGE 64
Spare Tube PAGE 26
3
0
The Package
2
0
4
6
8
CAPACITY (LPH)
10
• Peristaltic Pump • Sensor/
Temperature or Reservoir • Tubing
• Wiring Pack • Tie Wraps
• Installation Instructions •
Max. Flow
9.5 LPH
Inlet Height
Cable Length
44mm
2m
Part Code
Max. Lift
Discharge
Size
Watts
IP
Amps
Volts
Hz
High Level
Alarm
Suction Lift
TP Range
14m
1/4”
13 W
52
0.06 A
240 V
50 Hz
48V / 5A (TPR)
2m
Part Code
Description
Height
Length
Width
Weight
On Level
Off Level
TPS
Compressor Signal
115mm
96mm
98mm
1kg
N/A
N/A
TPT
Temperature Sensor
115mm
96mm
98mm
1kg
N/A
N/A
TPR
Reservoir and Alarm
115mm
96mm
98mm
1kg
13mm
8mm
www.pumph.co.uk 0115 900 5858
High Temperature Condensate Pump
PH-3.8L-HW
High
Temperature
Condensate
Pump
PH Family
249mm
29mm
325mm
160mm
100 degree condensate? No problem!
‘Edwin’ The Pump House high temperature tank pump is manufactured from heat resistant
All in Litres
per hour and metres
plastic to withstand
temperatures
of 100 degrees. Ideal for humidifiers, boiler condensate
and pressure relief.
PH-3.8L-HW
Features
0m = 361 LPH
• Suitable for 2.8pH
condensate
5m =boiler
280 LPH
• Supplied with8m
10 =
metres
of
160 LPH
3/8" hose
• High-level safety
switch
PH-5L-HW
• Max. flow 312 LPH
• Max. head 8m
0m = 1920 LPH
• Discharge volume
litresLPH
5m =1.5
1860
METRES HEAD
8
The Package
• 3.8 Litre Tank Pump
• 6 Metre 3/8" Hose • Hose Clip
• Installation Instructions •
6
4
Related Products
2
00
8m = 1680 LPH
100
200
300
400
CAPACITY (LPH)
Max. Flow
Tank Cap.
312 LPH
3.8 litres
VCMA 20S
PAGE 10
Braided Hose PAGE 64
Part Code
Max. Lift
Discharge
Size
PSI
Watts
Amps
Volts
Hz
High Level
Alarm
PH-3.8L-HW
8m
3/8” / 9.5mm
17.5
150 W
0.75 A
240 V
50 Hz
Volt Free
Temperature
Weight
Cable
Length
Drink Cycle
On Level
Off Level
Reserve Before
Overflow
Alarm Level
100°C
3.1kg
1.8m
1.5 litres
57mm
19mm
0.7 litres
105mm
Easy~Fit
Fixings
Flexi
Install +
Partners PH Family PH Motors Portable Service +
Squeezy
21
Heavy Duty High Temperature Condensate Pump
260mm
190mm
PH-5L-HW
Heavy
Duty High
Temperature
Condensate
Pump
PH Family
350mm
‘Granville’ The heavy duty giant!
Manufactured in the UK this heavy duty, high temperature tank pump incorporates thermal
All in Litres
perahour
metres
overload protection
and
highand
level
alarm switch. Ideal for humidifiers, steam ovens and
T & P discharge.
PH-3.8L-HW
• High-level safety
5m switch
= 280 LPH
• Max. flow 1920
LPH
(32 LPH
LPM)
8m = 160
• Max. head 20m
• Working Discharge
Lift 8m
PH-5L-HW
• Discharge rate volume 30 LPM
• 15mm copper
outlet
0m
= 1920 LPH
• 25mm copper
inlet
5m = 1860 LPH
• 15mm non-return
8m =valve
1680 LPH
22
METRES HEAD
Features
0m = 361 LPH
8
The Package
• 5 Litre Stainless Steel Tank Pump
• Installation Instructions •
6
4
Related Products
2
00
Inaba Trunking
1000
1250
1500
CAPACITY (LPH)
Max. Flow
Tank Cap.
1920 LPH
5 litres
PAGE 47-49
2000
Part Code
Description
Max. Discharge Lift
Working Discharge Lift
Tank Capacity
Outlet
Inlet
PH-5L-HW
Temperature and Pressure
Relief Pump
20m
8m
5 litres
15m
25m
Weight
On Level
Off Level
High Level Switch
7.05kg
252mm
197mm
Volt Free
www.pumph.co.uk 0115 900 5858
Dairy Cabinet Pumps
DCP-30A
DCP-30A/E/V
Dairy
Cabinet
Pumps
DCP-30V
PH Family
A supermarket must have!
The market-leading British made Pump House dairy cabinet range or fondly referred to as
‘Vincent’ offers an unrivalled solution to supermarket refrigeration. With a height of only 76mm
this stainless steel, easy to service pump delivers a complete solution. Available in 3 models:
‘Vincent’ DCP-30A, ‘Clarence’ DCP-30E and ‘Michael’ DCP-30V. Ideal for supermarket
refrigeration cabinets.
Features
The Package
• Only 76mm high – fits under even
the lowest display cabinets
• Barbed hose tail – for easy
connection of 1/2" drain hose
• Multiple inlet options (top, end or side)
• Power and alarm cables pre-fitted
• High discharge head and flow rate –
suitable for most applications
• Ideal for cold produce display
cabinets in supermarkets and
convenience stores
• IP 44 rated sealed electric box
• One year warranty
METRES HEAD
30
• Metal Low Profile Pump
• Installation Instructions •
22.5
15
Related Products
7.5
00
Klo-Shure®
175
350
525
PAGE 82
700
CAPACITY (LPH)
Max. Flow
dB(A)
700 LPH
N/A
Part Code
Description
Max. Discharge Lift
Tank Capacity
Outlet
High Level Alarm
DCP-30A
Dairy Cabinet Standard
700 LPH
5.5 litres
1/2"
30mm
DCP-30E
Dairy Cabinet Economy
700 LPH
5.5 litres
1/2"
N/A
DCP-30V
Dairy Cabinet Vertical
700 LPH
4.5 litres
1/2"
160mm
Part Code
Height
Length
Width
Weight
On Level
Off Level
DCP-30A
76mm
610mm
200mm
5kg
50mm
37mm
DCP-30E
76mm
610mm
200mm
5kg
50mm
37mm
DCP-30V
200mm
580mm
76mm
5kg
150mm
65mm
Easy~Fit
Fixings
Flexi
Install +
Partners PH Family PH Motors Portable Service +
Squeezy
23
Supermarket Cabinet Pump
Com
soo ing
n!
600mm
DCP-35A Supermarket
Cabinet Pump
90mm
PH Family
280mm
Retail refrigeration cabinet condensate gone!
Designed to fit under retail refrigeration cabinets. ‘William’ the Pump House economy DCP-35A,
offers excellent performance at outstanding value. Ideal for retail refrigeration cabinets.
Features
The Package
40
• 90mm high – fits underneath
low cabinets
• Outlet connects to either 3/8", 1/2"
and 5/8" hose
• Durable ABS polymer housing
• Dual-level sensors for large
drink-cycle
• Audible alarm on high-level
• Plug-in power cord
METRES HEAD
35
• Plastic Low Profile Pump • Kettle Fit
Mains Lead • Instructions •
30
25
20
Related Products
15
10
Klo-Shure®
5
00
50
100
150
200
250
PAGE 82
300
CAPACITY (LPH)
Max. Flow
280 LPH
24
Part Code
Description
Max. Discharge Lift
Tank Capacity
Outlet
High Level Alarm
DCP-35A
ABS Display Case Pump
35m
5.8 litres
3/8" or 1/2"
60mm
Part Code
Height
Length
Width
Weight
On Level
Off Level
DCP-35A
90mm
600mm
280mm
3.9kg
35mm
25mm
www.pumph.co.uk 0115 900 5858
Evaporator Tray
120mm
ET-150
Evaporator
Tray
90mm
PH Family
320mm
Evaporator Trays are back!
A thermostatically-controlled cast aluminium tray designed to collect and evaporate
condensate water. Ideal for refrigeration display cabinets.
Features
The Package
• Solid state heater for reliable
operation
• Corrosion-resistant
• Made out of cast aluminium
• One-piece pan
• Spring-mounting feet to minimize
heat transfer
• Thermostatic control lowers power
intake when pan is empty to
conserve energy
• Evaporator Tray • 4 x Wire Feet
• Installation Instructions •
Max. Flow
Tank Cap.
270 LPH
1.5 litres
Related Products
Klo-Shure®
PAGE 82
Part Code
Description
Max. Discharge Lift
Drinks Cycle
Outlet
Inlet
Watts Amps
ET-150
Evaporator Tray
N/A
N/A
N/A
N/A
225 W
Easy~Fit
Weight
On Level
Off Level
Volts/Hertz
1.1kg
N/A
N/A
230V / 50Hz
Fixings
Flexi
Install +
Partners PH Family PH Motors Portable Service +
Squeezy
25
Pump Accessories
Install +
Pump Accessories
Clear Braided Hose
Hose T Connector
Peristaltic
Replacement Tube
Peristaltic
Extension Cable
RVT
TPRC-10
26
701-038
EXTCABLE-4M
Hose Connectors
Hose Clamp
701-030
Peristaltic Service Kit
599325
B-6H
Remote Controller
KT-1000
Part Code
Description
Pump Type Application
TPRC-10
Peristaltic Replacement Tube
TPS, TPT & TPR
EXTCABLE-4M
Peristaltic Sensor Extension Cable – 4 metre
TPT / PCT-10
599325
Peristaltic Service Kit
TPS, TPT & TPR
RVT-1/4
Condensate Drain Hose x 30m – 1/4"
Tank, Mini & Peristaltic Pumps
RVT-3/8
Condensate Drain Hose x 30m – 3/8"
Tank Pumps
RVT-1/2
Condensate Drain Hose x 30m – 1/2"
Dairy Cabinet Pumps
701-030
Hose Connector – Nylon –1/4"
All Pumps
701-032
Hose Connector – Nylon –3/8"
All Pumps
701-038
Hose “T” Connector – Nylon – 3/8"
All Pumps
B-6H
Hose Clamp – 1/4" – 3/8"
All Pumps
KT-1000
Universal Remote Controller
Most Major Air Conditioning Units
www.pumph.co.uk 0115 900 5858
Pump Accessories
Audible Alarm
Non Return Valve 3/8" Non Return Valve 1/4"
513350
CV-38-3
Pipe Adaptor SelfSealing
Cassette Adaptors
ADAP-CAC
S – Green, M – Blue, L – Black
SVA-3
CV-14-3
Cassette Drain
Multipack
ADAP-CAC-X
Drain Adaptor
22mm – 3/8"
Drain Adaptor
ECOP-ADAP
ADAP-1
Part Code
Description
Pump Type Application
ECOP-ADAP
Condensate Drain Adaptor 16, 18, 22, 35mm Drain to 1/4" Hose
All Pumps
SVA-3
Pipe Adaptor – Self-Sealing – 1/4" – 3/8" Hose – Pack of Three
All Pumps
ADAP-CAC-S
Cassette A/C Drain Adaptors (Green) – 3/4" X 1" Pack of Three
Tank Pumps
ADAP-CAC-M
Cassette A/C Drain Adaptors (Blue) – 3/4" X 1-1/4" Pack of Three
Tank Pumps
ADAP-CAC-L
Cassette A/C Drain Adaptors (Black) – 3/4" X 1-1/2" Pack of Three
Tank Pumps
ADAP-CAC-X
Cassette A/C Drain Adaptors (Multipack) – Pack of Three
Tank Pumps
ADAP-1
Condensate Drain Adaptor 22mm Drain to 3/8" Hose
Tank Pumps
513350
Audible Alarm
All Pumps with a High Level Alarm Switch
CV-14-3
Non Return Valve – 1/4" – Pack of Three
VCC-20S, VCMA-20S, VCL-24S and PH-2L
CV-38-3
Non Return Valve – 3/8" – Pack of Three
VCC-20S, VCMA-20S, VCL-24S and PH-2L
Anti-Syph-Kit
Anti-Syphon Kit – 3/8" and 1/4" Hose
With 3/8" and 1/4" Hose
Easy~Fit
Fixings
Flexi
Install +
Partners PH Family PH Motors Portable Service +
Squeezy
27
Protecting,
Mounting,
Supporting
and Portables
Meet the Team...
John Dore
Sales
Representative
Section 2
Tom Hill
Area Sales
Manager
Easy~Fit Condensing Guards
Easy~Fit 500 Series Condensing Guards
Easy~Fit 750 Series Condensing Guards
Easy~Fit 900 Series Condensing Guards
Easy~Fit VRV/VRF Condensing Guards
Easy~Fit Wooden Guards
Easy~Fit Protective Housing
Easy~Fit Economy Bracket
Easy~Fit Type 2 Stainless Steel Brackets
Easy~Fit Cantilever Arms
Easy~Fit Cantilever Arm Kits
Easy~Fit Type 1 Brackets
Easy~Fit Type 2 Brackets
Easy~Fit Type 3 Brackets
Easy~Fit Condensate Collection Trays
28
Terry Wootten
Area Sales
Manager
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
Inaba Denko Trunking
ASHP Trunking
Flexi Lite Slab and Foot Kit
Mounting Blocks
Ultralite® Slabs
Rubber and Cork Mounting Strips
EVA™ Pads
Flexi H Frames
Flexi Frames
Flexi Foot with Strut Flexi Fix Clamp/Flexi Fix Pack
Flexi Foot Universal Portables (Air Conditioning Units)
Through the Wall Air Conditioner
www.pumph.co.uk 0115 900 5858
47-49
49
50
51
52
53
54
55
56
57
58
59
60
61
Protecting, Mounting, Supporting and Portables
NEW & EXCLUSIVE
Easy~Fit
Easy~Fit
Wooden Guards
Page 37
This new wooden Pump House guard is manufactured
from tanalised pressure-treated timber for added weather
protection and longer life. Particularly suited for areas of
outstanding beauty and buildings with a preservation order
or listed buildings.
Portable
Through the Wall
Air Conditioner
Page 61
Through the wall air conditioners, also known as
through-the-wall or in-wall air conditioners, are designed
to be a long-lasting fixture. These 12,000 btu air
conditioners are mounted into a hole in the wall as
a permanent installation.
Easy~Fit
Easy~Fit
Cantilever Arm Kits
Page 42
These kits are flat-packed and come with all of the fixings
necessary for a quick and easy installation.
29
Easy~Fit Protective Guards
Easy~Fit
Protective Guards
These unique, easy-to-install outdoor steel mesh guards
provide protection to most sizes of condensing units
against vandalism and accidental damage. With 14 sizes
in the range, we have the largest selection available
in the industry.
12 Years Industry Experience
Guards launched in 2002
Anti-Rust
Salt spray tested
to replicate
10 years’ use
Manufactured by
Pump House All jigs
and tools are owned
and designed by
Pump House
30
Largest Selection
14 sizes available
in the range
Scratch Resistant
Made with Zintec steel
with epoxy powder
ivory coating
Easy to Install and Service Unique
sliding panel system allows the
product to be installed quickly
www.pumph.co.uk 0115 900 5858
Protective Guards – Selection Chart
Protective Guards
Range
Weight
Size
Description/Application
Page
Page 32
Pump House
Easy~Fit
Condensing
Guards
18-40kg
S/M/L/XL
Weather-protected, steel mesh guards offering
protection to outdoor condensing units and externally
located air source heat pumps, against vandalism and
accidental damage
Pump House
Easy~Fit
500 Series
Condensing
Guards
13-23kg
S/M/L
INV
Weather-protected, steel mesh guards offering
protection to outdoor condensing units and externally
located air source heat pumps, against vandalism and
accidental damage. (Split back panel)
Page 33
25-33kg
S/M/L
INV
Weather-protected, steel mesh guards offering
protection to outdoor condensing units and externally
located air source heat pumps, against vandalism and
accidental damage. (Split back panel)
Page 34
Pump House
Easy~Fit
900 Series
Condensing
Guards
34-60kg
INV
L-SQ
XXL
Weather-protected, steel mesh guards offering
protection to outdoor condensing units and externally
located air source heat pumps, against vandalism and
accidental damage
Page 35
Pump House
Easy~Fit
VRF/VRV
Condensing
Guards
24-64kg
Base/Small/
Large
The UK’s first flat-packed, self-assembly guard for the
protection of outdoor VRV/VRF units against vandalism
and accidental damage
Page 36
Pump House
Easy~Fit
750 Series
Condensing
Guards
Get the Right Easy~Fit Guard
Pump House now have available 14 sizes of Easy~Fit
Guards. Please call with your Air Conditioning or Heat Pump
model number and we will specify your guard to size.
0115 900 5858
31
Easy~Fit Condensing Guards
Easy~Fit
Condensing
Guards
Easy~Fit
Easy Fit... Need we say more?
These Pump House manufactured weather-resistant, steel mesh guards offer a safe
solution to vandalism and accidental damage of your expensive air conditioning and air
source heat pump. Ideal for all manufacturers of air conditioning and air source heat pumps,
including Daikin, Fujitsu, Hitachi, LG, Mitsubishi, Panasonic and Toshiba. Call with the model
number of your unit and our team are ready to select your guard... 0115 900 5858.
Features
• Unique sliding panel system
• All panels can be removed for
maintenance by unscrewing just
four bolts
• Additional bottom and back panels
are available for stand-alone/high
wall options
• All bolts are allen-headed for
added security
• Quick and easy to install and
access for maintenance
• Textured finish in RAL7032
Related Products
Brackets
Collection Trays
Flexi Lite Kit
Flexi Foot with Strut
PAGE 43-45
PAGE 46
PAGE 50
PAGE 57
Part Code
Description
CG-BPS
Base Panel for Small Guard
CG-BPM
Base Panel for Medium Guard
CG-BPL
Base Panel for Large Guard
Dimensions (External)
32
The Package
• Wall Frame • Front Panel
• Top Panel • 2 x Side Panels
• 4 x Support Arms • Bag of Fixings •
Part Code
Description
CG-FPS
Front/Back Panel for Small Guard
CG-FPM
Front/Back Panel for Medium
Guard
CG-FPL
Front/Back Panel for Large Guard
CG-AF
Adjustable Feet for Guards
(Sold in Pairs)
Dimensions (Internal)
Part Code
Size
Height
Width
Depth
Height
Width
Depth
Weight
CG-S
S
750mm
1050mm
460mm
720mm
1020mm
450mm
18kg
CG-M
M
1150mm
1150mm
650mm
1120mm
1120mm
640mm
27kg
CG-L
L
1450mm
1150mm
650mm
1420mm
1120mm
640mm
30kg
CG-XL
XL
1800mm
1150mm
650mm
1770mm
1120mm
640mm
40kg
www.pumph.co.uk 0115 900 5858
Easy~Fit Condensing Guards
Easy~Fit
500 Series
Split Wall
Frame Guards
Easy~Fit
Unit already installed and need a guard? Look no further.
The split wall frame of these Pump House manufactured guards enable you to place a
guard with ease, post the installation of the condensing unit. You can work around pipework
and electrical connections hassle-free. 500 refers to the depth of the guard. Ideal for all
manufacturers of air conditioning and air source heat pumps, including Daikin, Fujitsu,
Hitachi, LG, Mitsubishi, Panasonic and Toshiba. Call with the model number of your unit and
our team are ready to select your guard... 0115 900 5858.
Features
• Additional bottom and back panels
are available for stand-alone/high
wall options
• All bolts are allen-headed for
added security
• Quick and easy to install and
access for maintenance
• Split back panel makes it easy to
retro fit
• Textured finish in RAL7032
The Package
Related Products
Brackets
Collection Trays
Flexi Lite Kit
Flexi Foot with Strut
• Upper Wall Frame • Lower Wall
Frame • Top Panel • Front Panel
• 2 x Side Panel • Bag of Fixings •
PAGE 43-45
PAGE 46
PAGE 50
PAGE 57
Part Code
Description
Part Code
Description
CG-500-FPS
CG-500-BPSML
Base Panel for 500
S/M/L Guard
Front/Back Panel for 500
Small Guard
CG-500-FPM
Front/Back Panel for 500
Medium Guard
CG-500-FPL
Front/Back Panel for 500
Large Guard
Dimensions (External)
Dimensions (Internal)
Part Code
Size
Height
Width
Depth
Height
Width
Depth
Weight
CG-500-S
S
620mm
1050mm
500mm
590mm
990mm
470mm
13kg
CG-500-M
M
1020mm
1050mm
500mm
990mm
990mm
470mm
18kg
CG-500-L
L
1420mm
1050mm
500mm
1390mm
990mm
470mm
23kg
Easy~Fit
Fixings
Flexi
Install +
Partners PH Family PH Motors Portable Service +
Squeezy
33
Easy~Fit Condensing Guards
Easy~Fit
750 Series
Split Wall
Frame Guards
Easy~Fit
Unit already installed and need a guard? Look no further.
The split wall frame of these Pump House manufactured guards enable you to place a
guard with ease, post the installation of the condensing unit. You can work around pipework
and electrical connections hassle-free. 750 refers to the depth of the guard. Ideal for all
manufacturers of air conditioning and air source heat pumps, including Daikin, Fujitsu,
Hitachi, LG, Mitsubishi, Panasonic and Toshiba. Call with the model number of your unit and
our team are ready to select your guard... 0115 900 5858.
Features
• Unique sliding panel system
• All panels can be removed for
maintenance by unscrewing just
four bolts
• Additional bottom and back panels
are available for stand alone/high
wall options
• All bolts are allen-headed for
added security
• Quick and easy to install and access
for maintenance
• Textured finish in RAL7032
Related Products
Brackets
Collection Trays
Flexi Lite Kit
Flexi Foot with Strut
PAGE 43-45
PAGE 46
PAGE 50
PAGE 57
Part Code
Description
CG-750-BPM
Base Panel for 750
S/M/L Guard
Dimensions (External)
34
The Package
• Upper Wall Frame • Lower Wall
Frame • Top Panel • Front Panel
• 2 x Side Panel • Bag of Fixings
• Installation Instructions •
Part Code
Description
CG-750-FPS
Front/Back Panel for 750
Small Guard
CG-750-FPM
Front/Back Panel for 750
Medium Guard
CG-750-FPL
Front/Back Panel for 750
Large Guard
CG-750-FPL
Front/Back Panel for 750
Large Inv. Guard
Dimensions (Internal)
Part Code
Size
Height
Width
Depth
Height
Width
Depth
Weight
CG-750-S
S
950mm
1150mm
750mm
920mm
1120mm
740mm
25kg
CG-750-M
M
1150mm
1150mm
750mm
1120mm
1120mm
740mm
32kg
CG-750-L
L
1450mm
1150mm
750mm
1420mm
1120mm
740mm
33kg
CG-750-INV
INV
1150mm
1450mm
750mm
1120mm
1420mm
740mm
33kg
www.pumph.co.uk 0115 900 5858
Easy~Fit Condensing Guards
Easy~Fit
900 Series
Guards
Easy~Fit
These Pump House manufactured weather-resistant, steel mesh guards offer a safe solution
to vandalism and accidental damage of your expensive air conditioning and air source heat
pump. Ideal for all manufacturers of air conditioning and air source heat pumps, including
Daikin, Fujitsu, Hitachi, LG, Mitsubishi, Panasonic and Toshiba. Call with the model number
of your unit and our team are ready to select your guard... 0115 900 5858.
Features
• Unique sliding panel system
• All panels can be removed for
maintenance by unscrewing just
four bolts
• Additional bottom and back panels
are available for stand alone/high
wall options
• All bolts are allen-headed for
added security
• Quick and easy to install and
access for maintenance
• Textured finish in RAL7032
The Package
Related Products
Brackets
Collection Trays
Flexi Lite Kit
Flexi Foot with Strut
• Wall Frame • Front Panel
• Top Panel • 2 x Side Panels
• 4 x Support Arms • Bag of Fixings
• Installation Instructions •
PAGE 43-45
PAGE 46
PAGE 50
PAGE 57
Part Code
Description
CG-BP900L
Base Panel for 900
L/XL Guard
Dimensions (External)
Part Code
Description
CG-FPL
Front/Back Panel for 900
Large Guard
CG-FP900LSQ
Front/Back Panel for 900
Square Guard
CG-FPXXL
Front/Back Panel for 900
XX Large Guard
Dimensions (Internal)
Part Code
Size
Height
Width
Depth
Height
Width
Depth
Weight
CG-900L-INV
L
1150mm
1450mm
900mm
1120mm
1420mm
890mm
34kg
CG-900L-SQ
L-SQ
1450mm
1450mm
900mm
1420mm
1370mm
890mm
51kg
CG-900-XXL
XXL
1800mm
1450mm
900mm
1770mm
1370mm
890mm
60kg
Easy~Fit
Fixings
Flexi
Install +
Partners PH Family PH Motors Portable Service +
Squeezy
35
Easy~Fit Condensing Guards
Easy~Fit
VRV/VRF
Guards
Easy~Fit
The UK first flat-packed, self-assembly guard!
This Pump House Easy~Fit VRV/VRF guards offer a quick and safe solution against
vandalism and accidental damage. This modular design allows you to protect any
variation of VRV/VRF installation. Ideal for all manufacturers of air conditioning and air source
heat pumps, including Daikin, Fujitsu, Hitachi, LG, Mitsubishi, Panasonic and Toshiba.
Call with the model number of your unit and our team are ready to select your guard...
0115 900 5858.
Features
• Avoids high cost bespoke fencing
and fabrication on site
• Suitable for all models/brands of
VRV/VRF units
• Floor mounting as standard
• Reversible floor fixings – can be
located inside (for security) or
outside (for ease of installation)
the guard
• Unique sliding panel system for
quick and easy assembly and
disassembly for maintenance
• Textured finish in RAL7032
Flexi Frames • 2 x Front/Back Panel • 2 x Side
Panels • Top Panel • 4 x Support
Arms • Bag of Fixings • Installation
Instructions •
PAGE 55-56
Overall Guard Dimensions
Order Requirements
Height
Width
Depth
CG-V-BP
CG-V-EP-6
CG-V-EP-12
2000mm
1160mm
1200mm
1
0
0
2000mm
1740mm
1200mm
1
1
0
2000mm
2320mm
1200mm
1
0
1
2000mm
2900mm
1200mm
1
1
1
2000mm
3480mm
1200mm
1
0
2
2000mm
4060mm
1200mm
1
1
2
Dimensions (External)
36
The Package
Related Products
Dimensions (Internal)
Part Code
Description
Height
Width
Depth
Height
Width
Depth
Weight
CG-VRF-BP
Base Pack
2000mm
1160mm
1200mm
1970mm
1130mm
1200mm
64kg
CG-VRF-EP-6
Extender Pack – Small
2000mm
580mm
1200mm
1970mm
N/A
1200mm
24kg
CG-VRF-EP-12
Extender Pack – Large
2000mm
1160mm
1200mm
1970mm
N/A
1200mm
41kg
www.pumph.co.uk 0115 900 5858
Easy~Fit Wooden Guard
Easy~Fit
Wooden
Guards
Easy~Fit
Typically British, designed for buildings with preservation orders,
listed buildings or areas of outstanding beauty.
These Pump House Easy~Fit wooden guards are made from tanalised, pressure-treated
timber. The design optimises air-flow with louvered panels, all round angled to deflect air
flow downwards. Ideal for all manufacturers of air conditioning and air source heat pumps,
including Daikin, Fujitsu, Hitachi, LG, Mitsubishi, Panasonic and Toshiba. Call with the model
number of your unit and our team are ready to select your guard... 0115 900 5858.
Features
• Improves visual appearance of the
heat pump
• Fast and easy to install and
assemble
• All components are flat packed for
easy transportation
• Louvered panels to optimise airflow
• Pressure treated external grade
timber
• Sized to suit most standard sizes
of ASHP’s
The Package
Related Products
Flexi Lite Kit • Side Panel (Left) • Side Panel (Right)
• Front Panel • Top Panel • Bag of
Fixings • Installation Instructions •
PAGE 50
Adequate space at the rear to allow
room for the pipework and cable
installation running to the unit.
Dimensions (External)
Dimensions (Internal)
Part Code
Size
Height
Front/Back
Width
Depth
Height
Front/Back
Width
Depth
Weight
CG-750S-WOOD
Small
905 / 960mm
1275mm
865mm
850 / 890mm
1055mm
753mm
34.7kg
CG-750M-WOOD
Medium
1135 / 1185mm
1275mm
865mm
1075 / 1115mm
1055mm
753mm
40.3kg
CG-750M+WOOD
Medium +
1255 / 1310mm
1275mm
865mm
1200 / 1240mm
1055mm
753mm
43.7kg
CG-750L-WOOD
Large
1530 / 1585mm
1275mm
865mm
1475 / 1515mm
1055mm
753mm
50.9kg
CG-750L-INV-WOOD
Large Inverted
1130 / 1185mm
1630mm
865mm
1075 / 1115mm
1405mm
753mm
47.2kg
Easy~Fit
Fixings
Flexi
Install +
Partners PH Family PH Motors Portable Service +
Squeezy
37
Easy~Fit Protective Housing
Easy~Fit
Protective
Housings
Easy~Fit
Protective housing, made to measure...
These Pump House manufactured Easy~Fit housings are available in 2 sizes.
The electro-galvanised steel receives an 8-phase epoxy polyester powder coating, with
a scratch resistant textured finish (RAL 7032). Ideal for all brands of outdoor refrigeration
condensing equipment.
Features
• Perforated steel side panels allow
free-flow of air for ventilation
• Universal – suits any brand of
refrigeration equipment
• Special bespoke sizes available
to order
Flexi Foot with Strut
PAGE 57
Plastic Mounting Blocks PAGE 51
Dimensions (External)
38
The Package
Related Products
• Base Panel • Top Panel • 2 x
Louvered Side Panels • 2 x Perforated
Side Panels • Back Panel with
Refrigerant Pipe Access Slot •
Dimensions (Internal)
Part Code
Size
Height
Width
Depth
Height
Width
Depth
Weight
CH-S
Small
500mm
710mm
600mm
410mm
640mm
530mm
23kg
CH-L
Large
550mm
810mm
720mm
460mm
740mm
640mm
30kg
www.pumph.co.uk 0115 900 5858
Easy~Fit Economy Bracket
Easy~Fit
Economy
Bracket
Easy~Fit
This economy bracket is ideal for wall-mounting lighter condensing units. The
traditional crossbar style allows easy spacing of the support arms.
Features
• Low cost bracket option
• Pre-riveted hinge saves time
on installation
• Supplied complete with condenser
mountings, level adjusters and
wall fixings
The Package
Related Products
All Guards
Collection Trays
PAGE 32-37
PAGE 46
• Crossbar • 2 x Support Arms
• 2 x Uprights • Fixings • Installation
Instructions •
Part Code
Description
Safe Working
Load*
Max Load
Crossbar
Upright
Support Arm
Weight
CBR2-EL
Economy Bracket with Crossbar
60kg
120kg
780mm
365mm
550mm
3.73kg
All brackets are tested to twice the safe working loads at an independent UK facility.
* It is the installer’s responsibility to ensure that equipment weights do not exceed the safe working loads quoted and that the roof structure onto which these products are being
applied is sufficiently sound to withstand the weight and point loading. If these products are used in contact with a PVC roof membrane the installer should seek advice from the
membrane manufacturer on the possible migration of plasticizers, and the effect of this on the roof guarantee. These products should not be used for any purpose other than that for
which they have been designed, and the products must not be modified in any way. Pump House accepts no liability for damage caused by the incorrect application or installation of
these products.
Easy~Fit
Fixings
Flexi
Install +
Partners PH Family PH Motors Portable Service +
Squeezy
39
Easy~Fit Stainless Steel Brackets
Easy~Fit
Type 2
Stainless Steel
Brackets
Easy~Fit
These flat-packed, self-assembly stainless steel brackets provide a professional finish to
the installation of wall-mounted outdoor condensing units and air source heat pumps. The
Type 2 brackets have a crossbar allowing the uprights to be spaced exactly as required,
and include wall spacers to help level the unit on uneven walls.
The Package
Features
• Uprights mount anywhere on the
crossbar which enables the arm
span to be adjusted easily
• Adjustable wall spacers to level
the arms
• Recommended for coastal locations
exposed to sea salt solutions or
corrosive environments
• Safe working load up to 160kg
• Crossbar • 2 x Support Arms
• 2 x Uprights • Fixings • Installation
Instructions •
Related Products
All Guards
Collection Trays
PAGE 32-37
PAGE 46
Part Code
Description
Safe Working
Load*
Max Load
Crossbar
Upright
Support Arm
CBR2-M-SS
Type 2 Stainless Steel Bracket – Medium
90kg
180kg
900mm
500mm
500mm
CBR2-L-SS
Type 2 Stainless Steel Bracket – Large
140kg
280kg
1040mm
550mm
540mm
CBR2-L+-SS
Type 2 Stainless Steel Bracket – Large Plus
160kg
280kg
1040mm
550mm
660mm
All brackets are tested to twice the safe working loads at an independent UK facility.
* It is the installer’s responsibility to ensure that equipment weights do not exceed the safe working loads quoted and that the roof structure onto which these products are being
applied is sufficiently sound to withstand the weight and point loading. If these products are used in contact with a PVC roof membrane the installer should seek advice from the
membrane manufacturer on the possible migration of plasticizers, and the effect of this on the roof guarantee. These products should not be used for any purpose other than that for
which they have been designed, and the products must not be modified in any way. Pump House accepts no liability for damage caused by the incorrect application or installation of
these products.
40
www.pumph.co.uk 0115 900 5858
Easy~Fit Cantilever Arms
Easy~Fit
Cantilever
Arms
Easy~Fit
These ready-made, hot-dipped galvanised steel cantilever arms with 14mm diameter holes,
offer a quick and easy method of supporting condensing units on external walls. Available
in a straight length and webbed version in a variety of lengths. The strut dimensions are
41mm x 41mm x 2.5mm.
The Package
Features
• Low cost bracket option
• Cantilever arm kit available to make
installation time easier and faster
• Available in straight lengths and
webbed versions
• Strut dimensions are 41mm x 41mm
x 2.5mm
Related Products
• 2 x Single Arms or Webbed •
All Guards
PAGE 32-37
Part Code
Description
Safe Working Load*
Crossbar
Upright
Weight
CA-450-S
Cantilever Arm – Single 450mm
250kg
450mm
1.56kg
1.4kg
CA-600-S
Cantilever Arm – Single 600mm
190kg
600mm
1.95kg
2kg
CA-750-S
Cantilever Arm – Single 750mm
150kg
750mm
2.35kg
2.4kg
CA-600-W
Cantilever Arm – Webbed 600mm
190kg
600mm
3.0kg
2.6kg
CA-750-W
Cantilever Arm – Webbed 750mm
150kg
750mm
3.5kg
3kg
The safe working loads quoted are for a concentrated load located at the mid-point of the arm.
* It is the installer’s responsibility to ensure that equipment weights do not exceed the safe working loads quoted and that the roof structure onto which these products are being
applied is sufficiently sound to withstand the weight and point loading. If these products are used in contact with a PVC roof membrane the installer should seek advice from the
membrane manufacturer on the possible migration of plasticizers, and the effect of this on the roof guarantee. These products should not be used for any purpose other than that for
which they have been designed, and the products must not be modified in any way. Pump House accepts no liability for damage caused by the incorrect application or installation of
these products.
Easy~Fit
Fixings
Flexi
Install +
Partners PH Family PH Motors Portable Service +
Squeezy
41
Easy~Fit Cantilever Arm Kits
Easy~Fit
Cantilever
Arm Kits
Easy~Fit
These kits are flat-packed and come with all of the fixings necessary for a quick and
easy installation.
Features
• Low cost bracket option
• Easy and fast to install
• Strut dimensions are 41mm x 41mm
x 2.5mm
• All fixings included
The Package
Related Products
All Guards
• 2 x Support Arms • 2 x Uprights
• Fixings •
PAGE 32-37
Part Code
Description
Height or
Equivalent
Width or
Equivalent
Length or
Equivalent
Weight
Safe Working
Load*
CA-600-KIT
Cantilever Arm Kit – 600mm
750mm
41mm
600mm
9kg
190kg per arm
CA-450-KIT
Cantilever Arm Kit – 450mm
750mm
41mm
450mm
8kg
250kg per arm
The safe working loads quoted are for a concentrated load located at the mid-point of the arm.
* It is the installer’s responsibility to ensure that equipment weights do not exceed the safe working loads quoted and that the roof structure onto which these products are being
applied is sufficiently sound to withstand the weight and point loading. If these products are used in contact with a PVC roof membrane the installer should seek advice from the
membrane manufacturer on the possible migration of plasticizers, and the effect of this on the roof guarantee. These products should not be used for any purpose other than that for
which they have been designed, and the products must not be modified in any way. Pump House accepts no liability for damage caused by the incorrect application or installation of
these products.
42
www.pumph.co.uk 0115 900 5858
Easy~Fit Brackets
Easy~Fit
Type 1
Brackets
Easy~Fit
These flat-packed, self-assembly brackets provide a professional finish to the installation
of wall-mounted outdoor condensing units and air source heat pumps. The Type 1
brackets have uprights that mount directly on to the wall via six shell anchor bolts provided,
maximising the rigidity of the installation. For improved corrosion resistance all metal now
receives a 100% zinc plating, followed by a hard ED coating, before being finished with an
external grade polyester power coating to RAL 7032.
• Uprights mount anywhere on the
crossbar which enables the arm
span to be adjusted easily
• Adjustable wall spacers to level
the arms
• Safe working load up to 250kg
• Suitable to match most brands of
condensing units and domestic air
source heat pumps
• Extra long arms (up to 1 metre
available for larger condensing units)
• Textured finish in (RAL 7032)
The Package
Related Products
Features
All Guards
Collection Trays
• 2 x Support Arms • 2 x Uprights •
Fixings • Installation Instructions •
PAGE 32-37
PAGE 46
Sea salts are very corrosive and affect both
ferrous and non-ferrous metals. Coastal
installations are particularly at risk as they
are frequently exposed to sea salt solutions
followed by dry periods, where this wet/dry cycle
produces a very corrosive environment. We
strongly recommend that in such locations only
our stainless steel brackets are installed.
Part Code
Description
Safe Working
Load*
Max Load
Upright
Support Arm
Weight
CBR1-S
Type 1 Bracket – Small
60kg
120kg
450mm
480mm
3.6kg
CBR1-M
Type 1 Bracket – Medium
90kg
180kg
500mm
530mm
4.6kg
CBR1-L
Type 1 Bracket – Large
140kg
280kg
550mm
580mm
4.7kg
CBR1-XL
Type 1 Bracket – Extra Large
250kg
500kg
550mm
660mm
8.8kg
CBR1-XXL
Type 1 Bracket – 2 x Extra Large
250kg
500kg
550mm
1000mm
11kg
All brackets are tested to twice the safe working loads at an independent UK facility.
Easy~Fit
Fixings
Flexi
Install +
Partners PH Family PH Motors Portable Service +
Squeezy
43
Easy~Fit Brackets
Easy~Fit
Type 2
Brackets
Easy~Fit
These flat-packed, self-assembly brackets provide a professional finish to the installation of
wall-mounted outdoor condensing units and air source heat pumps. The Type 2 brackets
have a crossbar allowing the uprights to be spaced exactly as required, and include wall
spacers to help level the unit on uneven walls. For improved corrosion resistance all metal
now receives a 100% zinc plating, followed by a hard ED coating, before being finished with
an external grade polyester power coating to RAL 7032.
Features
Related Products
The Package
• Crossbar with Spirit Level • 2 x
Support Arms • 2 x Uprights • Fixings
• Installation Instructions •
• Integral spirit level makes correct
installation of the crossbar easier
• Uprights mount anywhere on the
crossbar which enables the arm
span to be adjusted easily
• Adjustable wall spacers to level
the arms
• Safe working load up to 250kg
• Suitable to match most brands of
condensing units and domestic air
source heat pumps
• Extra long arms (up to 1 metre
available for larger condensing units)
• Textured finish in (RAL 7032)
All Guards
Collection Trays
Part Code
Description
Safe Working
Load*
Max Load
Crossbar
Upright
Support
Arm
Weight
CBR2-S
Type 2 Bracket – Small
60kg
120kg
720mm
400mm
400mm
3.8kg
CBR2-M
Type 2 Bracket – Medium
90kg
180kg
900mm
500mm
500mm
4.6kg
CBR2-L
Type 2 Bracket – Large
140kg
280kg
1100mm
550mm
540mm
6.6kg
CBR2-XL
Type 2 Bracket – Extra Large
250kg
500kg
1040mm
550mm
660mm
16.2kg
PAGE 32-37
PAGE 46
Sea salts are very corrosive and affect both
ferrous and non-ferrous metals. Coastal
installations are particularly at risk as they
are frequently exposed to sea salt solutions
followed by dry periods, where this wet/dry cycle
produces a very corrosive environment. We
strongly recommend that in such locations only
our stainless steel brackets are installed.
All brackets are tested to twice the safe working loads at an independent UK facility.
44
www.pumph.co.uk 0115 900 5858
Easy~Fit Brackets
Easy~Fit
Type 3
Brackets
Easy~Fit
The unique, interlocking mechanism of the Type 3 condensing unit brackets enable the
arms to be joined to the uprights in a matter of seconds. A spring-lock automatically
secures the joint, preventing the arms being dislodged accidentally. For improved corrosion
resistance all metal now receives a 100% zinc plating, followed by a hard ED coating,
before being finished with an external grade polyester power coating to RAL 7032.
Features
Related Products
The Package
• Crossbar with Spirit Level • 2 x
Support Arms • 2 x Uprights • Fixings
• Installation Instructions •
• Quick assembly saves installation
time and cost
• Integral spirit-level makes correct
installation of the crossbar easier
• Uprights mount anywhere on the
crossbar enabling arm span to be
adjusted easily
• Wall spacers can be adjusted to
level the arms independently
• Textured finish in (RAL 7032)
All Guards
Collection Trays
Part Code
Description
Safe Working
Load*
Max Load
Crossbar
Upright
Support
Arm
Weight
CBR3-M
Type 3 Bracket – Medium
90kg
180kg
900mm
500mm
500mm
6.8kg
CBR3-L
Type 3 Bracket – Large
140kg
280kg
1100mm
550mm
540mm
8.3kg
PAGE 32-37
PAGE 46
Sea salts are very corrosive and affect both
ferrous and non-ferrous metals. Coastal
installations are particularly at risk as they
are frequently exposed to sea salt solutions
followed by dry periods, where this wet/dry cycle
produces a very corrosive environment. We
strongly recommend that in such locations only
our stainless steel brackets are installed.
All brackets are tested to twice the safe working loads at an independent UK facility.
* It is the installer’s responsibility to ensure that equipment weights do not exceed the safe working loads quoted and that the roof structure onto which these products are being
applied is sufficiently sound to withstand the weight and point loading. If these products are used in contact with a PVC roof membrane the installer should seek advice from the
membrane manufacturer on the possible migration of plasticizers, and the effect of this on the roof guarantee. These products should not be used for any purpose other than that for
which they have been designed, and the products must not be modified in any way. Pump House accepts no liability for damage caused by the incorrect application or installation of
these products.
Easy~Fit
Fixings
Flexi
Install +
Partners PH Family PH Motors Portable Service +
Squeezy
45
Easy~Fit Condensate Collection Trays
Lightweight Tray
Easy~Fit
Condensate
Collection
Trays
Easy~Fit
Metal Tray
Lightweight Trays – These 100% rust-free, UV stabilised, rigid, reinforced PVC
condensate collection trays will fit any make of bracket. At less than 1kg, they are much
easier to handle than metal trays and the tapered outlet fits a 16mm or 18mm hose pipe.
Features
• Easy to handle – less than 1kg each
• Tapered outlet fits 16mm or 18mm
hose pipe
Part Code
Description
Width
Length
CCT-790
Lightweight Tray – Small
390mm
790mm
CCT-940
Lightweight Tray – Large
420mm
940mm
Metal Trays – These metal trays have a convex profile and a recessed surface flush, drain
hose adaptor, minimising the amount of standing water left in the tray. Supplied with fixing
arms for mounting to all Pump House brackets. For improved corrosion resistance all metal
now receives a 100% zinc plating, followed by a hard ED coating, before being finished with
an external grade polyester power coating to RAL 7032.
Features
• Concave profile ensures effective
water drainage
• Recessed, surface-flush drain pipe
adaptor minimizes standing water in
the tray
• Three sizes to suit many applications
• 1/2" BSP male thread on drain outlet
46
Part Code
Description
Width
Length
Weight
CCTM-800
Metal Tray – Small
400mm
800mm
5.27kg
CCTM-1100
Metal Tray – Medium
400mm
1100mm
6.93kg
CCTM-1400
Metal Tray – Large
400mm
1400mm
8.26kg
The Package
• Tray • 2 x Hangers • Fixings
• Installation Instructions •
Related Products
All Brackets (Excluding
Cantilever Arms)
PAGE 39-45
www.pumph.co.uk 0115 900 5858
Inaba Denko Trunking
Inaba Denko
Partners
Trunking
The NEW range of Inaba Denko internal and external trunking will ensure that the air
conditioning refrigeration pipes are protected with a professional finish. The three colours –
black, ivory and white will match most brands of condensing units available, UV resistant,
fire proof and can be painted to suit many indoor and outdoor applications.
Straight Duct
90° Vertical Elbow
45° Vertical Elbow
Reducer
End Fitting
Easy~Fit
Fixings
Flexi
Install +
Part Code
Description
ID-NSD-100-I
Slimduct – 100mm – 2000mm – Ivory (Order 10)
ID-NSD-100-W
Slimduct – 100mm – 2000mm – White (Order 10)
ID-SD-100-K
Slimduct – 100mm – 2000mm – Black
ID-NSD-75-I
Slimduct – 75mm – 2000mm – Ivory
ID-NSD-75-W
Slimduct – 75mm – 2000mm – White
ID-SD-75-K
Slimduct – 75mm – 2000mm – Black
Part Code
Description
ID-SC-100-I
Slimduct – 100mm Elbow Bend – Ivory
ID-SC-100-W
Slimduct – 100mm Elbow Bend – White
ID-SC-100-K
Slimduct – 100mm Elbow Bend – Black
ID-SC-75-I
Slimduct – 75mm Elbow Bend – Ivory
ID-SC-75-W
Slimduct – 75mm Elbow Bend – White
ID-SC-75-K
Slimduct – 75mm Elbow Bend – Black
Part Code
Description
ID-SCF-100-I
Slimduct – 100mm 45 Degree Elbow Bend – Ivory
ID-SCF-100-W
Slimduct – 100mm 45 Degree Elbow Bend – White
ID-SCF-100-K
Slimduct – 100mm 45 Degree Elbow Bend – Black
ID-SCF-75-I
Slimduct – 75mm 45 Degree Elbow Bend – Ivory
ID-SCF-75-W
Slimduct – 75mm 45 Degree Elbow Bend – White
ID-SCF-75-K
Slimduct – 75mm 45 Degree Elbow Bend – Black
Part Code
Description
ID-SDR-100-75-I
Slimduct – 100-75mm Reducer Joint – Ivory
ID-SDR-100-75-W
Slimduct – 100-75mm Reducer Joint – White
ID-SDR-100-75-K
Slimduct – 100-75mm Reducer Joint – Black
Part Code
Description
ID-SE-75-I
Slimduct – 75mm Duct End – Ivory
ID-SE-75-W
Slimduct – 75mm Duct End – White
ID-SE-75-K
Slimduct – 75mm Duct End – Black
ID-SEN-100-I
Slimduct – 100mm Duct End – Ivory
ID-SEN-100-W
Slimduct – 100mm Duct End – White
ID-SEN-100-K
Slimduct – 100mm Duct End – Black
Partners PH Family PH Motors Portable Service +
Squeezy
47
Inaba Denko Trunking
Inaba Denko
...continued
Flexible Joint
Coupler
90° Flat Elbow
45° Flat Elbow
Ceiling Cover
48
Partners
Trunking
Part Code
Description
ID-SF-100-800-I
Slimduct – 100mm – 800mm Flexible Joint – Ivory
ID-SF-100-800-W
Slimduct – 100mm – 800mm Flexible Joint – White
ID-SF-100-800-K
Slimduct – 100mm – 800mm Flexible Joint – Black
ID-SF-75-500-I
Slimduct – 75mm – 500mm Flexible Joint – Ivory
ID-SF-75-500-W
Slimduct – 75mm – 500mm Flexible Joint – White
ID-SF-75-500-K
Slimduct – 75mm – 500mm Flexible Joint – Black
Part Code
Description
ID-SJ-100-I
Slimduct – 100mm Connection Piece – Ivory
ID-SJ-100-W
Slimduct – 100mm Connection Piece – White
ID-SJ-100-K
Slimduct – 100mm Connection Piece – Black
ID-SJ-75-I
Slimduct – 75mm Connection Piece – Ivory
ID-SJ-75-W
Slimduct – 75mm Connection Piece – White
ID-SJ-75-K
Slimduct – 75mm Connection Piece – Black
Part Code
Description
ID-SK-100-I
Slimduct – 100mm 90 Degree Flat Bend – Ivory
ID-SK-100-W
Slimduct – 100mm 90 Degree Flat Bend – White
ID-SK-100-K
Slimduct – 100mm 90 Degree Flat Bend – Black
ID-SK-75-I
Slimduct – 75mm 90 Degree Flat Bend – Ivory
ID-SK-75-W
Slimduct – 75mm 90 Degree Flat Bend – White
ID-SK-75-K
Slimduct – 75mm 90 Degree Flat Bend – Black
Part Code
Description
ID-SKF-100-I
Slimduct – 100mm 45 Degree Flat Bend – Ivory
ID-SKF-100-W
Slimduct – 100mm 45 Degree Flat Bend – White
ID-SKF-100-K
Slimduct – 100mm 45 Degree Flat Bend – Black
ID-SKF-75-I
Slimduct – 75mm 45 Degree Flat Bend – Ivory
ID-SKF-75-W
Slimduct – 75mm 45 Degree Flat Bend – White
ID-SKF-75-K
Slimduct – 75mm 45 Degree Flat Bend – Black
Part Code
Description
ID-SP-100-I
Slimduct – 100mm Flat Rosette Ivory
ID-SP-100-W
Slimduct – 100mm Flat Rosette White
ID-SP-100-K
Slimduct – 100mm Flat Rosette Black
ID-SP-75-I
Slimduct – 75mm Flat Rosette Ivory
ID-SP-75-W
Slimduct – 75mm Flat Rosette White
ID-SP-75-K
Slimduct – 75mm Flat Rosette Black
www.pumph.co.uk 0115 900 5858
Inaba Denko and ASHP Trunking
T Joint
Wall Inlet
Wall Cap
Tie Clip Kit
Part Code
Description
ID-ST-100-I
Slimduct – 100mm T Joint – Ivory
ID-ST-100-W
Slimduct – 100mm T Joint – White
ID-ST-100-K
Slimduct – 100mm T Joint – Black
ID-ST-75-I
Slimduct – 75mm T Joint – Ivory
ID-ST-75-W
Slimduct – 75mm T Joint – White
ID-ST-75-K
Slimduct – 75mm T Joint – Black
Part Code
Description
ID-SW-100-I
Slimduct – 100mm Wall Cover – Ivory
ID-SW-100-W
Slimduct – 100mm Wall Cover – White
ID-SW-100-K
Slimduct – 100mm Wall Cover – Black
ID-SW-75-I
Slimduct – 75mm Wall Cover – Ivory
ID-SW-75-W
Slimduct – 75mm Wall Cover – White
ID-SW-75-K
Slimduct – 75mm Wall Cover – Black
Part Code
Description
ID-SWC-100-I
Slimduct – 100mm Wall Rosette – Ivory
ID-SWC-100-W
Slimduct – 100mm Wall Rosette – White
ID-SWC-100-K
Slimduct – 100mm Wall Rosette – Black
ID-SWC-75-I
Slimduct – 75mm Wall Rosette – Ivory
ID-SWC-75-W
Slimduct – 75mm Wall Rosette – White
ID-SWC-75-K
Slimduct – 75mm Wall Rosette – Black
Part Code
Description
ID-SL-300
Slimduct – Tie Clip
TR-CP-140
TR-D-140
TR-EC-140
ASHP
Trunking
TR-IC-140
TR-WC-140
TR-FB-140
Partners
Pipework and insulation running from an air source heat pump should be protected. Our
range of trunking comes in a 140mm width with an ivory or black option and accommodates
both the insulated flow and return pipework along with any associated cabling.
Part Code
Ivory
Part Code
Black
Description
Height
Width
Length
TR-D-140
TR-D-140-B
Length of Trunking
90mm
140mm
2000mm
TR-WC-140
TR-WC-140-B
Wall Cover
90mm
140mm
–
TR-CP-140
TR-CP-140-B
Straight Connector
90mm
140mm
–
TR-IC-140
TR-IC-140-B
90 Degree Internal Bend
90mm
140mm
–
TR-FB-140
TR-FB-140-B
90 Degree Flat Bend
90mm
140mm
–
TR-EC-140
TR-EC-140-B
90 Degree External Bend
90mm
140mm
–
Easy~Fit
Fixings
Flexi
Install +
Partners PH Family PH Motors Portable Service +
Squeezy
49
Flexi Lite Slab and Foot Kit
Flexi
Lite Slab
and Foot Kit
Flexi
A low cost innovative solution for floor mounting any type of air conditioning equipment
and air source heat pump. The FLEXI Lite Slab and Foot kit avoids the high cost and time
consuming need to construct a concrete base. It can be delivered to site with minimum
preparation and can be assembled in minutes. It provides a fixing point for the unit and has
built in anti-vibration characteristics. It also suits most brands of air conditioning units and
domestic air source heat pumps.
• Low cost and rapid installation time
• Easy to transport and locate
• Safe working load – 600kg
• Simple to construct
• Fixing pack to secure feet to the slab
• Fixing pack to secure condenser or
heat pump to the feet
The Package
Related Products
Features
Wooden Guard
• Flexi Slab • 2 or 3 x Flexi Feet
• 2 x Fixing Plate • Fixings
• Installation Instructions •
PAGE 37
* It is the installer’s responsibility to ensure that equipment weights do not exceed the safe working loads quoted and
that the roof structure onto which these products are being applied is sufficiently sound to withstand the weight and point
loading. If these products are used in contact with a PVC roof membrane the installer should seek advice from the membrane manufacturer on the possible migration of plasticizers, and the effect of this on the roof guarantee. These products
should not be used for any purpose other than that for which they have been designed, and the products must not be
modified in any way. Pump House accepts no liability for damage caused by the incorrect application or installation of
these products.
Material
50
Rubber
Compression moulded using milled, sieved and graded, recycled rubber bound with high quality adhesive
Density
1.0kg/cm³
Strut
41 x 21 x 1.5mm galvanized steel
Slab
1200 x 600 x 75mm encapsulated polystyrene core slab reinforced with textured cement coating
Part Code
Description
Width
Height
Length
Weight
Safe Working
Load*
FF-UC3
Flexi Slab and Foot Kit (With Two Feet)
600mm
175mm
1200mm
25.5kg
600kg
FF-UC3-3
Flexi Slab and Foot Kit (With Three Feet)
600mm
175mm
1200mm
31kg
600kg
FF-UC3-XL
Flexi Slab and Foot Kit (With Two Feet)
865mm
175mm
1650mm
47kg
600kg
www.pumph.co.uk 0115 900 5858
Flexi Mounting Blocks
Flexi
Mounting
Block
Flexi
These mounting blocks are lightweight, 100% rust-free, UV stabilised and manufactured
from reinforced PVC. Suitable for mounting air conditioning units and domestic air source
heat pumps. The blocks reduce vibration and are supplied with fixings for a simple,
rapid installation.
The Package
Related Products
Features
• Supplied with anti-slip strips on
the base
• End caps are available for a
professional finish
• Available in three sizes
Flexi Foot with Strut
PAGE 57
Anti-Vibration Strips
PAGE 53
• Mounting Block • Fixings •
Part Code
Description
Height
Width
Length
Safe Working
Load*
CMB-350
Mounting Block – 350mm
100mm
100mm
350mm
240kg
CMB-450
Mounting Block – 450mm
100mm
100mm
450mm
240kg
CMB-1000
Mounting Block – 1000mm
100mm
100mm
1000mm
240kg
* It is the installer’s responsibility to ensure that equipment weights do not exceed the safe working loads quoted and that the roof structure onto which these products are being
applied is sufficiently sound to withstand the weight and point loading. If these products are used in contact with a PVC roof membrane the installer should seek advice from the
membrane manufacturer on the possible migration of plasticizers, and the effect of this on the roof guarantee. These products should not be used for any purpose other than that for
which they have been designed, and the products must not be modified in any way. Pump House accepts no liability for damage caused by the incorrect application or installation of
these products.
Easy~Fit
Fixings
Flexi
Install +
Partners PH Family PH Motors Portable Service +
Squeezy
51
Ultralite® Slabs
Ultralite®
Slabs
Partners
Don’t be fooled – Ultralite® Slabs look and perform like concrete slabs but at only 13kg
they are lightweight and very easy to handle and transport. So give your aching back a rest
and use Ultralite® Slabs to mount all your air conditioning units and domestic air source
heat pumps.
Features
• Safe working load – 56kg per
50mm diameter
• Easy to handle and transport
• Available in three sizes
Chemical Resistance
In normal usage conditions an
equipment pad can be exposed to a
variety of chemicals. The Ultralite® Slab
has been fully tested in accordance
with ASTM D2299 for resistance
against: all refrigerants, compressor
oils, salt solution and synthetic
canine urine.
Construction
• Encapsulated polystyrene core
• Fibre reinforced cement coating
• Outside slurry coating with texturing
Related Products
Flexi Frames The Package
• Ultralite® Slab •
Freeze/Thaw Testing
The Ultralite® Slab has been
independently tested to the rigorous
freeze-thaw regimen specified by ASTM
C67. This standard dictates a twentyfive cycle freeze-thaw sequence. The
freeze portion of the sequence takes
place with the top surface of the slab
under 12mm of water. Once twenty
five cycles are complete the slab is
examined for cracks and crazing. The
Ultralite® Slab performed flawlessly.
PAGE 55-56
* It is the installer’s responsibility to ensure that equipment
weights do not exceed the safe working loads quoted and
that the roof structure onto which these products
are being applied is sufficiently sound to withstand the
weight and point loading. If these products are used in
contact with a PVC roof membrane, the installer should
seek advice from the membrane manufacturer on the
possible migration of plasticizers, and the effect of this
on the roof guarantee. These products should not be
used for any purpose other than that for which they have
been designed, and the products must not be modified
in any way. Pump House accepts no liability for damage
caused by the incorrect application or installation of
these products.
Part Code
Description
Length
Width
Depth
Safe Working Load*
UC-1636-2
ULTRALITE® Equipment Slab
900mm
400mm
51mm
343kg
UC-2424-2
ULTRALITE® Equipment Slab
600mm
600mm
51mm
270kg
UC-2448-3
ULTRALITE Equipment Slab
1200mm
600mm
76mm
703kg
®
Other sizes may be available – please contact our Sales Office to discuss your requirements.
52
www.pumph.co.uk 0115 900 5858
Flexi Rubber and Cork Mounting Strips
Flexi
Rubber
and Cork
Mounting
Strips
Flexi
Anti-Vibration Mounting Strips are a low cost option for mounting air conditioning units,
air source heat pumps and other equipment providing vibration reduction and sound
dampening. Available in recycled rubber and cork-rubber in various sizes.
Features
• Up to 30 dB(A) reduction in sound
• UV stable
The Package
Related Products
Mounting Blocks
PAGE 51
• 1 Rubber Strip or Cork Strip •
Part Code
Description
Length
Width
Thickness
AVMS-1
Anti-Vibration Mounting Strip – RUBBER
500mm
50mm
15mm
AVMS-2
Anti-Vibration Mounting Strip – RUBBER
1000mm
75mm
15mm
AVMS-3
Anti-Vibration Mounting Strip – RUBBER
1200mm
75mm
15mm
AVMS-4
Anti-Vibration Mounting Strip – RUBBER
1000mm
100mm
15mm
AVMS-CR-3
Anti-Vibration Mounting Strip – CORK
1200mm
75mm
12.5mm
AVMS-CR-4
Anti-Vibration Mounting Strip – CORK
1200mm
100mm
12.5mm
Cork – Rubber Strips
Rubber Strips
Rubber
Natural Granulated Cork – 1.0 to 3.0mm Chloroprene Rubber
Rubber
Recycled Rubber
Density
600 kg/m³
Density
900 kg/m³
Tensile Strength
2.2mpa
Tensile Strength
2.1mpa
Compressibility
25-40%
Elongation at Break
125%
Recovery
80%
Hardness
60 SHORE A
Hardness
50 SHORE A
Working Temperature
- 20°C to +135ºC
Easy~Fit
Fixings
Flexi
Install +
Partners PH Family PH Motors Portable Service +
Squeezy
53
EVATM Pads
EVA
Pads
TM
Partners
EVA™ anti-vibration pads are designed to effectively eliminate vibrations and reduce noise
levels from appliances such as compressors, condensing units and air source heat pumps.
Out-performing cork and rubber by 3:1, the EVA Pad has a special composite foam centre
and is resistant to most oils and chemicals.
Features
• Safe working load – 3.5kg per cm²
• Special composite foam centre
• Available in five sizes
Related Products
Material Specification
• RUBBER Used as the anti-vibration
surface on the top/bottom of
the pad. This rubber is a styrene
butadiene rubber with aggressive
tensile strength and characteristics
suitable for the application
Ultralite® Slabs
PAGE 52
The Package
• 1 x EVA™ Mounting Pad •
• EVA™ Used as the core vibration
dampening material. This EVA
material is a polymetric foam
material. It is constructed out of a
blend of ethyl vinyl acetate and
other enhancements
54
Part Code
Description
Length
Width
Depth
Weight
MP-2E
EVA Anti-Vibration Mounting Pad – 50mm
50mm
50mm
20mm
0.036kg
MP-3E
EVA Anti-Vibration Mounting Pad – 80mm
80mm
80mm
20mm
0.075kg
MP-4E
EVA Anti-Vibration Mounting Pad – 100mm
100mm
100mm
20mm
0.146kg
MP-6E
EVA Anti-Vibration Mounting Pad – 150mm
150mm
150mm
20mm
0.342kg
MP-12E
EVA Anti-Vibration Mounting Pad – 305mm
305mm
305mm
20mm
1.395kg
MP-18E
EVA Anti-Vibration Mounting Pad – 460mm
460mm
460mm
20mm
2.97kg
www.pumph.co.uk 0115 900 5858
Flexi H-Frames
Flexi H-Frames
Flexi
Our H-frame kits offer the installer full flexibility by providing a solution where they can supply
their own strut to suit their installation requirements. The H-frame kits can be supplied with a
pair of either 320mm feet, (these are most widely used in the majority of installations) 365mm
dia. feet, or where heavier more demanding loads are present, use the 500mm foot version
kit. All kits are supplied with hot dip galvanised angle brackets together with all the necessary
fixings to assist the installer in a low cost, versatile and fast assembly solution on site.
Features & Benefits
• Non-penetrative support
• Flexible design to accommodate
late design changes
• Fast and simple installation
• Hot dip galvanized bracketry
• Rubber mats adhered to feet
• Three foot sizes available
• The kit comes supplied in a box
• Full AutoCAD drawing support
• Load management and wind
calculations available
• Full on-site support and
surveying services
Related Products
Material Specification
• Foot – 365mm dia. UV stabilised
100% polypropylene
• Foot – 320mm and 500mm UV
stabilised 90% polypropylene,
10% grp
• Mat – 100% natural rubber (mat is
adhered to the feet)
• Fixings – M10 ZP sets, spring
washers and nuts
• Angle brackets – mild steel, hot dip
galvanized BS EN ISO 1461:1999
• This product is supplied boxed.
Kit does NOT include strut
(frame) metalwork
Flexi Frames
PAGE 56
The Package
• 2 x Square Black Feet • Fixings •
* NB The lengths of strut are not supplied with this kit.
** As the strut is not supplied with the kit, the maximum
load is a guide only.
Part Code
Description
Foot Size
Safe Working Load**
Weight
F-HF-320
Flexi H-Frame Set – 2 Square Black Feet and Fittings*
320mm x 320mm
250kg
4kg
F-HF-500
Flexi H-Frame Set – 2 Square Black Feet and Fittings*
500mm x 500mm
600kg
6kg
** It is the installer’s responsibility to ensure that equipment weights do not exceed the safe working loads quoted and that the roof structure onto which these products are being
applied is sufficiently sound to withstand the weight and point loading. If these products are used in contact with a PVC roof membrane, the installer should seek advice from the
membrane manufacturer on the possible migration of plasticizers, and the effect of this on the roof guarantee. These products should not be used for any purpose other than that for
which they have been designed, and the products must not be modified in any way. Pump House accepts no liability for damage caused by the incorrect application or installation of
these products.
Easy~Fit
Fixings
Flexi
Install +
Partners PH Family PH Motors Portable Service +
Squeezy
55
Flexi Frames
Square Black Foot
Flexi Frames
Grey Foot
Flexi
The BASE & EXTENDER frames are designed to provide stability and spread loads evenly
across flat roof surfaces. The galvanised steel frame raises equipment up to 405mm above
the flat roof level, permitting quick and easy access for roof maintenance.
Features
• Quick and easy height adjustments
• Fast and easy to install
• Time and cost saving
• Allows maintenance access under
the equipment
• No penetration of water proof
membrane
• Suitable for multiple ASHP
installation on flat roofs
Part Code
Black Foot
The Package
Related Products
Flexi H Frames
Flexi Foot with Strut
Flexi Foot Universal
PAGE 55
PAGE 57
PAGE 59
• 4 x Feet • 2 x Box Section
• 2 x Strut Beam with Clamps
• 3 x Adjustable Leg Assembly
• 8 x Pre-Assembled Bolts •
Description
Length
Width
Min Height
Max
Height
Safe Working
Load*
Weight
Grey Foot
PH-BF-B
PH-BF
Flexi Base Frame
1200mm
1200mm
300mm
405mm
500kg
30kg
PH-EF-B
PH-EF
Flexi Extender Frame
1200mm
1200mm
300mm
405mm
500kg
24kg
PH-BF-1500-B PH-BF-1500
Flexi Base Frame 1500
1500mm
1500mm
300mm
405mm
500kg
33kg
PH-EF-1500-B PH-EF-1500
Flexi Extender Frame 1500
1500mm
1500mm
300mm
405mm
500kg
24kg
Material
Feet
365mm², UV-stabilised polypropylene and vulcanized natural rubber
Legs
50mm diameter, 3mm galvanized steel tube. M24 galvanized steel height adjuster. 3mm galvanized steel U-clevis
Box Beams
38 x 38 x 2.5mm galvanized steel square tube
Cross Beams
41 x 41 x 2.5mm galvanized steel slotted channel
Fixing Bolts
M12 zinc-plated steel
Operating Temperatures: -25ºC to + 80ºC
56
www.pumph.co.uk 0115 900 5858
Flexi Foot with Strut
Flexi
Foot
with Strut
Flexi
Flexi Foot with Strut – These feet can support pipework, cable tray, and can also be used
to mount air conditioning units, air source heat pumps and a variety of outdoor equipment.
Solar thermal and solar photovoltaic on flat roof installations can also be accommodated.
• Available in four sizes: 250mm,
400mm, 600mm and 1000mm
• Made from heavy duty recycled
rubber
• 21 x 41mm galvanized steel strut is
supplied bonded to the rubber
• Drain slots molded to the underside
of the foot
The Package
Related Products
Features
Flexi H Frames
Flexi Frames
• 1 x Flexi Foot with Strut •
PAGE 55
PAGE 56
Material
Rubber
Compression moulded using milled, sieved and graded, recycled rubber
bound with high quality adhesive
Density
1.0 kg/cm³
Strut
41 x 21 x 1.5mm galvanized steel
Part Code
Description
Length
Width
Height
Safe Working
Load*
Weight
FF-250-S
Flexi Foot – 250mm Strut
250mm
185mm
100mm
125kg
2.8kg
FF-400-S
Flexi Foot – 400mm Strut
400mm
185mm
100mm
200kg
4.6kg
FF-600-S
Flexi Foot – 600mm Strut
600mm
185mm
100mm
300kg
7.6kg
FF-1000-S
Flexi Foot – 1000mm Strut
1000mm
185mm
100mm
500kg
12.0kg
* The maximum loads quoted in the above table is based on loads applied over the top surface, and have been tested with a 4:1 safety ratio.
• It is the installer’s responsibility to ensure that equipment weights do not exceed the safe working loads quoted and that the roof structure onto which these products are being
applied is sufficiently sound to withstand the weight and point loading. If these products are used in contact with a PVC roof membrane the installer should seek advice from the
membrane manufacturer on the possible migration of plasticizers, and the effect of this on the roof guarantee. These products should not be used for any purpose other than that for
which they have been designed, and the products must not be modified in any way. Pump House accepts no liability for damage caused by the incorrect application or installation of
these products.
Easy~Fit
Fixings
Flexi
Install +
Partners PH Family PH Motors Portable Service +
Squeezy
57
Flexi Fix Clamp and Fix Pack
Flexi
Fix
Clamp
Flexi
The Flexi Fix Clamp is used to add additional stability particularly with twin fan units. The fix
clamp can be secured to the floor with anchor bolts.
Part Code
Description
Length
Width
Height
FF-FIXCLAMP
Fix Clamp
240mm
60mm
103mm
Related Products
Flexi Foot with Strut
PAGE 57
Flexi Foot Universal
PAGE 59
Flexi
Fix Pack
Flexi
To complement our range of Flexi Feet we have created two versions of fix packs in either
spring nut or T bolt. The pack contain bolts, nuts and washers for the installation of a pair of
feet for a single condensing unit.
Related Products
Flexi Foot with Strut
58
PAGE 57
Part Code
Description
FF-FIX PACK
Components with Spring Bolts to Secure an Outdoor A/C Unit – (For 2 Feet)
FF-FIX 2
Components with T Bolts to Secure an Outdoor A/C Unit – (For 2 Feet)
www.pumph.co.uk 0115 900 5858
Flexi Foot Universal
Flexi
Foot
Universal
Flexi
The Flexi Foot Universal has three M10 inserts, offering support for small pipework and runs
of cable tray, air source heat pumps and a variety of outdoor equipment. The installer is
free to bolt their own strut of various lengths to suit any installation from 500mm to 3000mm
in length. It can also be used to support both solar thermal and solar photovoltaic on flat
roof installations.
• One size: 250mm
• Made from heavy duty recycled
rubber
• Three M10 inserts set into the mould
• Drain slots moulded to the underside
of the foot
The Package
Related Products
Features
Threaded Rod
PAGE 86
• 1 x Flexi Foot with Three
M10 Inserts •
Material
Rubber
Compression moulded using milled, sieved and graded, recycled rubber bound with high quality adhesive
Density
1.0 kg/cm³
Inserts
M10 (metric course thread) x 20mm zinc plated steel, through inserts
Maximum Torque (inserts)
15Nm
Maximum Load (inserts)
25kg
Part Code
Description
Length
Width
Height
Safe Working Load*
Weight
FF-250-UNI
FLEXI FOOT – 250mm Universal
250mm
185mm
100mm
125kg
2.8kg
* The maximum loads quoted is 25kg per insert and have been tested with a 4:1 safety ratio.
• It is the installer’s responsibility to ensure that equipment weights do not exceed the safe working loads quoted and that the roof structure onto which these products are being
applied is sufficiently sound to withstand the weight and point loading. If these products are used in contact with a PVC roof membrane the installer should seek advice from the
membrane manufacturer on the possible migration of plasticizers, and the effect of this on the roof guarantee. These products should not be used for any purpose other than that for
which they have been designed, and the products must not be modified in any way. Pump House accepts no liability for damage caused by the incorrect application or installation of
these products.
Easy~Fit
Fixings
Flexi
Install +
Partners PH Family PH Motors Portable Service +
Squeezy
59
Portables
Pump House
Portables
Portable
(available as Cooling Only
or Heat Pump) (Heat Pump
option is a reverse cycle unit)
The Pump House portable air conditioners are suitable for offices, computer rooms and
light commercial use. The cooling only model is ideal for cooling flats, conservatories or loft
conversions during hot summer months. The heat pump model can also be used as an
energy efficient form of heating during the cold winter months.
• Meets EN14511 standard and EU
commission regulation 206/2012
• Proven well-tested designs
• LED display and remote control
(both models)
• Flexible exhaust hose – 1.5m
(both models)
• Energy efficiency rating A
• Suitable for areas up to 26m²
• No pump required – self-evaporating
condensate. Hose needs to be
connected when in heat-only mode
• R410A Refrigerant
60
The Package
Related Products
Features
Through Wall Air Conditioner
• Portable Unit • Remote Controller
• Installation Instructions •
PAGE 61
A
A
Portable Spare Parts
We supply spare parts
for all of the Pump House
Portables – Please enquire
for details.
ENERGY
EFFICIENCY
Part Code
Description
Cool Capacity
Btu / kW
Heat Capacity
Btu / kW
Watts
Amps
Air Flow
Volume
EER
COP
dB(A) Sound
Power Level
PAC-C-12
Portable (Cooling)
12,000 / 3.5
N/A
1350 W
5.9 A
370m³/h
2.6
N/A
65
PAC-H-12
Portable (Heat Pump)
12,000 / 3.5
10,000 / 2.9
1350 W
5.9 A
370m³/h
2.6
2.6
65
Part Code
Description
Height
Width
Depth
Weight
Hose Length Refrigerant Cooling Area
PAC-C-12
Portable (Cooling)
765mm
467mm
397mm
34kg
1.5m
R410A
18-26m²
PAC-H-12
Portable (Heat Pump)
765mm
467mm
397mm
37.5kg
1.5m
R410A
18-26m²
www.pumph.co.uk 0115 900 5858
Through the Wall Air Conditioner
WAC-C-12
Through
the Wall Air
Conditioner
Portable
Wall air conditioners, also known as through-the-wall or in-wall air conditioners, are
designed to be a long-lasting fixture. These 12,000 btu air conditioners are mounted
into a hole in the wall as a permanent installation.
The Package
Related Products
Features
•Meets EN14511 standard and EU
commission regulation 206/2012
• 12,000 btu
• Proven, well-tested design
• LED display
• Remote control
• Low noise
• Suitable for areas up to 23m2
• R32 refrigerant
Portables
• Through Wall Unit • Remote
Controller • Installation Instructions •
PAGE 60
Part Code
Description
Cooling Capacity Btu / kW
Watts
Amps
Air Flow Volume
WAC-C-12
Through-Wall Air Conditioner
12000/3.5
1100
5.1
400m3/h
Easy~Fit
Height
Width
Depth
Weight
Refrigerant
Cooling Area
400mm
560mm
670mm
42kg
R32
16-23m2
Fixings
Flexi
Install +
Partners PH Family PH Motors Portable Service +
Squeezy
61
Accessories,
Ancillaries, Tools
and Maintenance
Meet the Team...
Nadine Bailey
Sales
Representative
Section 3
Jill Cureton
Area Sales
Manager
Braided Hose
Clear Vinyl Hose
Plastic Hose and Tube Cutter Flexible Hose
Through the Wall Kit
Rotary Enclosed Isolators
Copper Fittings
Brass Fittings
Access Fittings
Klo-Shure® Series 7 Clamps
Cushion Clamps
Rapid Positioning Clips/Studded Clips
Insul Clips/Cable Tie Channel Clips
Threaded Rod Hangers/Flow Return Clamp
Vibration Absorbers
Multi-Fit Fan Motors
62
Paul Greengrass
Business
Development
Manager
64
65
65
66
67
68
69-78
79-80
81
82
83
84
85
86
87
88
Tangential Fan Motors
High Efficiency ECM Fan Motors
Fan Accessories Axial Fan Motors
Pro Range and G2G Range
Aerosol and Odour Elimination Products
Hand Held and Power Sprayers
Diversi-Flush™ Kit
Gallo Gun and Nitrogen Purge Tool
Lubricants and Sealants
Line Seal Kit/Copper Spun Driers
Refrigerant ID Labels
E-Lite Plastic Equipment Pads
Line Taps
Tape, Cloths and Mats
89
90
91
92
93
94
95
96
97
98-99
100
101
101
102-103
104-105
www.pumph.co.uk 0115 900 5858
Accessories, Ancillaries, Tools and Maintenance
NEW & EXCLUSIVE
Install +
Copper Fittings
Page 69-78
Squeezy
Squeezy~Fit Threaded
Rod Hangers
Pump House offer a comprehensive range of high quality
Page 86
AC and refrigeration copper fittings manufactured to the
very latest ASME and BS/EN standards that are fully
These clamps support a pair of flow and return insulated copper
compliant and certified to Pressure Equipment Directive
air conditioning pipes on either M8 or M10 threaded rod. By
(PED) requirements. 2016 will see the introduction of CO2
simply squeezing the tips together the spring steel
fittings to the range (as per page 69).
rod hanger can be fitted or adjusted in seconds.
Install +
Rotary Enclosed
Isolators
Page 68
Insulated 3 and 4 pole, CE marked, A/C isolators,
suitable for disconnecting power supply to outdoor air
conditioning condensing units.
Install +
Flexible Hose
Page 66
Pump House Flexible Hose is designed to meet the requirements
of the MCS MIS 3005 installation specification to allow the flow
and return pipe work to connect to a heat pump. The flexible
hose helps to avoid any movement in the pipe work and allows
for a smooth bend when connecting.
63
Braided Hoses
Braided
Hose
Install +
Now available in 6 metre and 30 metre coils. This reinforced PVC hose is suitable for
condensate drains and comes packaged in clear shrink wrap for protection and easy
storage. Black reinforced PVC hose has no light penetration, preventing build up of
mould growth.
Features
• Available in 6 metre and 30 metre
lengths
• Available in clear or black
• Maximum temperature +60 degrees
• Minimum temperature -15 degrees
Related Products
Cassette Adaptor
Hose Connector PAGE 27
PAGE 26
The Package
• Coil of Clear or Black Braided Hose
• Available in 6m or
30m Lengths •
Part Code
Description
ID
OD
Working
Burst
Min Bend
Radius
Min Temp*
Max Temp
RVT-1/2-6
1/2" x 6m Clear
12mm
16mm
6
18
30º
-15°C
+60°C
RVT-3/4-6
3/4" x 6m Clear
19mm
23mm
6
18
30º
-15°C
+60°C
RVT-1/4
1/4" x 30m Clear
6mm
10mm
7
21
30º
-15°C
+60°C
RVT-3/8
3/8" x 30m Clear
10mm
14mm
8
24
30º
-15°C
+60°C
RVT-1/2
1/2" x 30m Clear
12mm
16mm
6
18
30º
-15°C
+60°C
RVT-5/8
5/8" x 30m Clear
16mm
20mm
6
18
30º
-15°C
+60°C
RVT-1/4-B
1/4" x 30m Black
6mm
10mm
7
21
30º
-15°C
+60°C
RVT-3/8-B
3/8" x 30m Black
10mm
14mm
8
24
30º
-15°C
+60°C
RVT-1/2-B
1/2" x 30m Black
12mm
16mm
6
18
30º
-15°C
+60°C
* Hose stored in conditions above +5°C will be easier to handle/install.
64
www.pumph.co.uk 0115 900 5858
Clear Vinyl Hose and Plastic Hose and Tube Cutter
Clear
Vinyl Hose
Install +
Applications include air conditioning and refrigeration condensate drains, condensate pump
discharge lines and humidifier overflows. Available in 30 metre and 15 metre coils, the clear
vinyl hose comes ready packed in a box making it easier for use and storage.
Features
• Several sizes from 1/4" to
1" diameter
• Non-toxic clear vinyl chloride
• Extra rigid design resists crimpling
and kinking due to durometer value
of 80 (shore A) and thicker wall
• Maximum service temperature
140°F (60°C)
• Better performance in cold
weather climates
The Package
Related Products
Braided Hose
PAGE 64
• Coil of Clear Vinyl Hose
• Available in 6m or 30m Lengths •
Part Code
Description
ID
OD
Length
7-14
1/4" x 30m Clear
7-38
3/8" x 30m Clear
6.3mm
9.1mm
30m
9.5mm
12.5mm
30m
7-12
1/2" x 30m Clear
12.7mm
16mm
30m
7-58
5/8" x 30m Clear
15.8mm
19.6mm
30m
7-34
3/4" x 30m Clear
19mm
23.1mm
30m
7-78
7/8" x 15m Clear
22.2mm
26.7mm
15m
7-10
1" x 15m Clear
25.4mm
30.8mm
15m
KUT-ALL Plastic
Hose and Tube Cutter
Install +
The KUT-All PK-2 is a tough, durable nylon cutter with a foldable blade for safe handling.
Using replaceable high carbon, Teflon coated steel blades it is ideal for cutting up to 1-1/8"
I.D. plastic tubing, reinforced plastic tubing, rigid plastic pipe, and rubber hose.
Part Code
Description
PK-2
Kut-All Plastic Hose and Tube Cutter
PK-2B
Replacement Blades for Kut-All
Easy~Fit
Fixings
Flexi
Install +
Partners PH Family PH Motors Portable Service +
Squeezy
65
Flexible Hose
1" BSP Female
Flexible
Hose
1" BSP Male
Install +
Pump House Flexible Hose is designed to meet the requirements of the MCS MIS 3005
installation specification to allow the flow and return pipe work to connect to a heat pump.
The flexible hose helps to avoid transmission of vibration in the pipe work and allows for a
smooth bend when connecting the flow and return pipe to the heat pump or biomass boiler.
The 28m hose is sleeved within a stainless steel braid for added protection, available in female or male BSP (British
Standard Pipe) thread at one end and 28mm compression fitting at the other. The hose comes with 19mm thick
weather proof, PVC coated insulation for UV stability and added robustness.
Features
Related Products
• Stainless steel braided hose
• Pre-insulated with 19mm thick
PVC coating
• 1" and 1-1/4" male or female BSP
thread fitting available
• 28mm / 32mm compression fitting
• Suitable for most ASHP and
Biomass Boilers
Inaba Trunking
The Package
PAGE 47-49
Flexi Lite Slab and
Foot Kit
PAGE 50
ASHP Trunking
PAGE 49
• 2 x Flexible Hose • 2 x Insulation
• 2 x Elbow (Only in Elbow Version) •
Part Code
Description
Length
Diameter
Fitting 1
Fitting 2
Insulation
FH-500-28-F
ASHP Flexible Hose 500
500mm
28mm
1" FBSP
28mm Compression
19mm
FH-750-28-F
ASHP Flexible Hose 750 Female
750mm
28mm
1" FBSP
28mm Compression
19mm
FH-750-28-M
ASHP Flexible Hose 750 Male
750mm
28mm
1" MBSP
28mm Compression
19mm
FH-1000-28-F
ASHP Flexible Hose 1000
1000mm
28mm
1" FBSP
28mm Compression
19mm
FH-750-28-F ELB
ASHP Flexible Hose 750 Female Elbow
750mm
28mm
1" FBSP
28mm Compression
19mm
FH-750-32-F
ASHP Flexible Hose 750 Female
750mm
32mm
1/1/4" FBSP
32mm Compression
19mm
Ancillaries – Insulation
66
Part Code
Description
Length
Diameter
Thickness
ID
FH-I-1000-15
PVC Coated Weather and Waterproof Insulation 1000
1000mm
41mm
13mm
15mm
FH-I-1000-22
PVC Coated Weather and Waterproof Insulation 1000
1000mm
60mm
19mm
22mm
FH-I-1000-28
PVC Coated Weather and Waterproof Insulation 1000
1000mm
66mm
19mm
28mm
FH-I-1000-35
PVC Coated Weather and Waterproof Insulation 1000
1000mm
73mm
19mm
35mm
www.pumph.co.uk 0115 900 5858
Through the Wall Kit
Through
the Wall Kit
Install +
Features
Running pipework from an externally mounted air source
heat pump or biomass boiler into a property, requires the
pipework to run through the exterior wall. The hot pipework
will be affected by cold bridging and heat loss if it is not
insulated correctly. The Pump House TW-Kit (Through
Wall Insulation Kit) provides both thermal insulation within
the wall complete with elbow section to cover the copper
connection. To be used with standard 65mm core drill.
Easy~Fit
Part Code
Description
TW-KIT
Sleeved 19mm tough PVC coated insulation kit
Fixings
Flexi
Install +
Partners PH Family PH Motors Portable Service +
Squeezy
• Avoids heat loss and improves
efficiency
• 190mm wall insulation with tough
PVC coating
• 2 x straight 320mm lengths
• 2 x custom slit elbows
• Suitable for both 22mm and
28mm pipe
Related Products
All Guards
PAGE 32-37
All Brackets
PAGE 43-45
67
Rotary Enclosed Isolators
Rotary
Enclosed
Isolators
Insulated 3 and 4 pole, CE marked, A/C isolators, suitable for disconnecting power supply
to outdoor air conditioning condensing units.
Related Products
Features
• Weatherproof to IP65
• Easy installation
• M20/25 knockouts up to 63A
• Handle lockable in off position
• Interlocked cover – removable in off
position only
• Earth and neutral terminals included
• Captive, retained cover screws
• Conforms to IEC 60947-3
Part Code
68
All Guards
PAGE 32-37
All Brackets
PAGE 43-45
No. of
Poles
Amps
AC21
AC23 A
240VA
AC23 A
400VA
IS-3P-20A
3
20 Amp
5.5 kW
IS-3P-32A
3
32 Amp
IS-3P-40A
3
IS-3P-63A
Cable Capacity
The Package
• Rotary Enclosed Isolator •
Height
Width
Depth
Solid
Stranded
3.7 kW
1-16mm²
0.75-10mm²
175mm
114mm
135mm
11 kW
7.5 kW
1-16mm²
0.75-10mm²
175mm
114mm
135mm
40 Amp
15 kW
11 kW
1-16mm²
0.75-10mm²
175mm
114mm
135mm
3
63 Amp
22 kW
18.5 kW
1-16mm²
0.75-10mm²
175mm
114mm
135mm
IS-4P-20A-S
4
20 Amp
5.5 kW
3.7 kW
1-16mm²
0.75-10mm²
125mm
100mm
120mm
IS-4P-20A
4
20 Amp
5.5 kW
3.7 kW
1-16mm²
0.75-10mm²
175mm
114mm
135mm
IS-4P-32A-S
4
32 Amp
11 kW
7.5 kW
1-16mm²
0.75-10mm²
125mm
100mm
120mm
IS-4P-32A
4
32 Amp
11 kW
7.5 kW
1-16mm²
0.75-10mm²
175mm
114mm
135mm
IS-4P-40A
4
40 Amp
15 kW
11 kW
1-16mm²
0.75-10mm²
175mm
114mm
135mm
IS-4P-63A
4
63 Amp
22 kW
18.5 kW
1-16mm²
0.75-10mm²
175mm
114mm
135mm
www.pumph.co.uk 0115 900 5858
Copper Fittings
Copper Fittings
Install +
Pump House offer a comprehensive range of high quality AC and refrigeration copper
fittings manufactured to the very latest ASME and BS/EN standards and are fully compliant
and certified to Pressure Equipment Directive (PED) requirements. Other sizes may be
available – please contact the Sales Office for further information.
NEW FOR 2016!
We will be adding CO² Fittings to the range – please contact the Sales Office
for details.
90 Degree Elbow (CxC)
C235-0002-PH-SR
90 Degree Street Elbow
(FxC)
C254-0002-PH-SRSE
Easy~Fit
Fixings
Flexi
Install +
Part Code
Description
Connections
C235-0001-PH-SR
Elbow 90 Degree 1/4"
1/4
C235-0002-PH-SR
Elbow 90 Degree 3/8"
3/8
C235-0025-PH-SR
Elbow 90 Degree 1/2"
1/2
C235-0050-PH-SR
Elbow 90 Degree 5/8"
5/8
C235-0090-PH-SR
Elbow 90 Degree 3/4"
3/4
C235-0100-PH-SR
Elbow 90 Degree 7/8"
7/8
C235-0150-PH-SR
Elbow 90 Degree 1-1/8"
1-1/8
C235-0215-PH-SR
Elbow 90 Degree 1-3/8"
1-3/8
C235-0295-PH-SR
Elbow 90 Degree 1-5/8"
1-5/8
C235-0390-PH-SR
Elbow 90 Degree 2-1/8"
2-1/8
C235-0520-PH-SR
Elbow 90 Degree 2-5/8"
2-5/8
C235-0650-PH-SR
Elbow 90 Degree 3-1/8"
3-1/8
C235-0750-PH-SR
Elbow 90 Degree 3-5/8"
3-5/8
C235-0850-PH-SR
Elbow 90 Degree 4-1/8"
4-1/8
Part Code
Description
Connections
C254-0002-PH-SRSE
Street Elbow 90 Degree 3/8"
3/8
C254-0025-PH-SRSE
Street Elbow 90 Degree 1/2"
1/2
C254-0050-PH-SRSE
Street Elbow 90 Degree 5/8"
5/8
C254-0090-PH-SRSE
Street Elbow 90 Degree 3/4"
3/4
C254-0100-PH-SRSE
Street Elbow 90 Degree 7/8"
7/8
C254-0150-PH-SRSE
Street Elbow 90 Degree 1-1/8"
1-1/8
C254-0215-PH-SRSE
Street Elbow 90 Degree 1-3/8"
1-3/8
C254-0295-PH-SRSE
Street Elbow 90 Degree 1-5/8"
1-5/8
C254-0390-PH-SRSE
Street Elbow 90 Degree 2-1/8"
2-1/8
C254-0520-PH-SRSE
Street Elbow 90 Degree 2-5/8"
2-5/8
C254-0650-PH-SRSE
Street Elbow 90 Degree 3-1/8"
3-1/8
C254-0750-PH-SRSE
Street Elbow 90 Degree 3-5/8"
3-5/8
C254-0850-PH-SRSE
Street Elbow 90 Degree 4-1/8"
4-1/8
Partners PH Family PH Motors Portable Service +
Squeezy
69
Copper Fittings
Copper Fittings
Install +
90 Degree Long Turn
Elbow (CxC)
C242-0001-PH-LR
90 Degree Long Turn
Street Elbow (FxC)
C272-0002-PH-LRSE
45 Degree Elbow
(CxC)
C290-0050-PH-45DEG
70
...continued
Part Code
Description
Connections
C242-0001-PH-LR
Elbow Long Turn 90 Degree 1/4"
1/4
C242-0002-PH-LR
Elbow Long Turn 90 Degree 3/8"
3/8
C242-0025-PH-LR
Elbow Long Turn 90 Degree 1/2"
1/2
C242-0050-PH-LR
Elbow Long Turn 90 Degree 5/8"
5/8
C242-0090-PH-LR
Elbow Long Turn 90 Degree 3/4"
3/4
C242-0100-PH-LR
Elbow Long Turn 90 Degree 7/8"
7/8
C242-0150-PH-LR
Elbow Long Turn 90 Degree 1-1/8"
1-1/8
C242-0215-PH-LR
Elbow Long Turn 90 Degree 1-3/8"
1-3/8
C242-0295-PH-LR
Elbow Long Turn 90 Degree 1-5/8"
1-5/8
C242-0390-PH-LR
Elbow Long Turn 90 Degree 2-1/8"
2-1/8
C242-0520-PH-LR
Elbow Long Turn 90 Degree 2-5/8"
2-5/8
C242-0650-PH-LR
Elbow Long Turn 90 Degree 3-1/8"
3-1/8
C242-0750-PH-LR
Elbow Long Turn 90 Degree 3-5/8"
3-5/8
C242-0850-PH-LR
Elbow Long Turn 90 Degree 4-1/8"
4-1/8
Part Code
Description
Connections
C272-0002-PH-LRSE
Street Elbow Long Turn 90 Degree 3/8"
3/8
C272-0025-PH-LRSE
Street Elbow Long Turn 90 Degree 1/2"
1/2
C272-0050-PH-LRSE
Street Elbow Long Turn 90 Degree 5/8"
5/8
C272-0090-PH-LRSE
Street Elbow Long Turn 90 Degree 3/4"
3/4
C272-0100-PH-LRSE
Street Elbow Long Turn 90 Degree 7/8"
7/8
C272-0150-PH-LRSE
Street Elbow Long Turn 90 Degree 1-1/8"
1-1/8
C272-0215-PH-LRSE
Street Elbow Long Turn 90 Degree 1-3/8"
1-3/8
C272-0295-PH-LRSE
Street Elbow Long Turn 90 Degree 1-5/8"
1-5/8
C272-0390-PH-LRSE
Street Elbow Long Turn 90 Degree 2-1/8"
2-1/8
C272-0520-PH-LRSE
Street Elbow Long Turn 90 Degree 2-5/8"
2-5/8
C272-0650-PH-LRSE
Street Elbow Long Turn 90 Degree 3-1/8"
3-1/8
C272-0750-PH-LRSE
Street Elbow Long Turn 90 Degree 3-5/8"
3-5/8
C272-0850-PH-LRSE
Street Elbow Long Turn 90 Degree 4-1/8"
4-1/8
Part Code
Description
Connections
C290-0002-45DEG
Elbow 45 Degree 3/8"
3/8
C290-0025-45DEG
Elbow 45 Degree 1/2"
1/2
C290-0050-45DEG
Elbow 45 Degree 5/8"
5/8
C290-0090-45DEG
Elbow 45 Degree 3/4"
3/4
C290-0100-45DEG
Elbow 45 Degree 7/8"
7/8
C290-0150-45DEG
Elbow 45 Degree 1-1/8"
1-1/8
C290-0215-45DEG
Elbow 45 Degree 1-3/8"
1-3/8
C290-0295-45DEG
Elbow 45 Degree 1-5/8"
1-5/8
www.pumph.co.uk 0115 900 5858
Copper Fittings
45 Degree Elbow
(CxC) ...continued
45 Degree Street Elbow
(FxC)
C295-0002-PH-45SE
Couplings with Tube
Stops (CxC)
C165-0001-PH-CXC
Reducer Couplings with
Tube Stops (CxC)
C165-0007-PH-CXC
Easy~Fit
Fixings
Flexi
Install +
Part Code
Description
Connections
C290-0390-45DEG
Elbow 45 Degree 2-1/8"
2-1/8
C290-0520-45DEG
Elbow 45 Degree 2-5/8"
2-5/8
C290-0650-45DEG
Elbow 45 Degree 3-1/8"
3-1/8
C290-0750-45DEG
Elbow 45 Degree 3-5/8"
3-5/8
C290-0850-45DEG
Elbow 45 Degree 4-1/8"
4-1/8
Part Code
Description
Connections
C295-0002-PH-45SE
Street Elbow 45 Degree 3/8"
3/8
C295-0025-PH-45SE
Street Elbow 45 Degree 1/2"
1/2
C295-0050-PH-45SE
Street Elbow 45 Degree 5/8"
5/8
C295-0090-PH-45SE
Street Elbow 45 Degree 3/4"
3/4
C295-0100-PH-45SE
Street Elbow 45 Degree 7/8"
7/8
C295-0150-PH-45SE
Street Elbow 45 Degree 1-1/8"
1-1/8
C295-0215-PH-45SE
Street Elbow 45 Degree 1-3/8"
1-3/8
C295-0295-PH-45SE
Street Elbow 45 Degree 1-5/8"
1-5/8
C295-0390-PH-45SE
Street Elbow 45 Degree 2-1/8"
2-1/8
C295-0520-PH-45SE
Street Elbow 45 Degree 2-5/8"
2-5/8
C295-0650-PH-45SE
Street Elbow 45 Degree 3-1/8"
3-1/8
C295-0750-PH-45SE
Street Elbow 45 Degree 3-5/8"
3-5/8
C295-0850-PH-45SE
Street Elbow 45 Degree 4-1/8"
4-1/8
Part Code
Description
Connections
C165-0001-PH-CXC
Elbow Long Turn 90 Degree 1/4"
1/4
C165-0002-PH-CXC
Elbow Long Turn 90 Degree 3/8"
3/8
C165-0025-PH-CXC
Elbow Long Turn 90 Degree 1/2"
1/2
C165-0050-PH-CXC
Elbow Long Turn 90 Degree 5/8"
5/8
C165-0090-PH-CXC
Elbow Long Turn 90 Degree 3/4"
3/4
C165-0100-PH-CXC
Elbow Long Turn 90 Degree 7/8"
7/8
C165-0150-PH-CXC
Elbow Long Turn 90 Degree 1-1/8"
1-1/8
C165-0215-PH-CXC
Elbow Long Turn 90 Degree 1-3/8"
1-3/8
C165-0295-PH-CXC
Elbow Long Turn 90 Degree 1-5/8"
1-5/8
C165-0390-PH-CXC
Elbow Long Turn 90 Degree 2-1/8"
2-1/8
C165-0520-PH-CXC
Elbow Long Turn 90 Degree 2-5/8"
2-5/8
C165-0650-PH-CXC
Elbow Long Turn 90 Degree 3-1/8"
3-1/8
C165-0750-PH-CXC
Elbow Long Turn 90 Degree 3-5/8"
3-5/8
C165-0850-PH-CXC
Elbow Long Turn 90 Degree 4-1/8"
4-1/8
Part Code
Description
Connections
1
2
C165-0007-PH-CXC
Reducer Coupling with Tube Stop 3/8" x 1/4"
3/8 x 1/4
C165-0032-PH-CXC
Reducer Coupling with Tube Stop 1/2" x 3/8"
1/2 x 3/8
C165-0033-PH-CXC
Reducer Coupling with Tube Stop 1/2" x 1/4"
1/2 x 1/4
C165-0058-PH-CXC
Reducer Coupling with Tube Stop 5/8’" x 1/2"
5/8 x 1/2
Partners PH Family PH Motors Portable Service +
Squeezy
71
Copper Fittings
Copper Fittings
Install +
Reducer Couplings with
Tube Stops (CxC)
...continued
C165-0223-PH-CXC
1
2
...continued
Part Code
Description
Connections
1
2
C165-0059-PH-CXC
Reducer Coupling with Tube Stop 5/8" x 3/8"
5/8 x 3/8
C165-0093-PH-CXC
Reducer Coupling with Tube Stop 3/4" x 5/8"
3/4 x 5/8
C165-0094-PH-CXC
Reducer Coupling with Tube Stop 3/4" x 1/2"
3/4
x
1/2
C165-0107-PH-CXC
Reducer Coupling with Tube Stop 7/8" x 5/8"
7/8
x
5/8
C165-0108-PH-CXC
Reducer Coupling with Tube Stop 7/8" x 1/2"
7/8
x
1/2
C165-0149-PH-CXC
Reducer Coupling with Tube Stop 7/8" x 3/4"
7/8
x
3/4
C165-0159-PH-CXC
Reducer Coupling with Tube Stop 1-1/8" x 7/8"
1-1/8 x
7/8
C165-0160-PH-CXC
Reducer Coupling with Tube Stop 1-1/8" x 5/8"
1-1/8 x
5/8
C165-0161-PH-CXC
Reducer Coupling with Tube Stop 1-1/8" x 1/2"
1-1/8
x
1/2
C165-1498-PH-CXC
Reducer Coupling with Tube Stop 1-1/8" x 3/4"
1-1/8
x
3/4
C165-0222-PH-CXC
Reducer Coupling with Tube Stop 1-3/8" x 1-1/8"
1-3/8
x
1-1/8
C165-0223-PH-CXC
Reducer Coupling with Tube Stop 1-3/8" x 7/8"
1-3/8
x
7/8
C165-0224-PH-CXC
Reducer Coupling with Tube Stop 1-3/8" x 5/8"
1-3/8
x
5/8
C165-0303-PH-CXC
Reducer Coupling with Tube Stop 1-5/8" x 1-3/8"
1-5/8
x
1-3/8
C165-0304-PH-CXC
Reducer Coupling with Tube Stop 1-5/8" x 1-1/8"
1-5/8
x
1-1/8
C165-0305-PH-CXC
Reducer Coupling with Tube Stop 1-5/8" x 7/8"
1-5/8
x
7/8
C165-0398-PH-CXC
Reducer Coupling with Tube Stop 2-1/8" x 1-5/8"
2-1/8
x
1-5/8
C165-0399-PH-CXC
Reducer Coupling with Tube Stop 2-1/8" x 1-3/8"
2-1/8
x
1-1/8
C165-0400-PH-CXC
Reducer Coupling with Tube Stop 2-1/8" x 1-1/8"
2-1/8
x
1-1/8
C165-0401-PH-CXC
Reducer Coupling with Tube Stop 2-1/8" x 7/8"
2-1/8
x
7/8
C165-0531-PH-CXC
Reducer Coupling with Tube Stop 2-5/8" x 2-1/8"
2-5/8
x
2-1/8
C165-0532-PH-CXC
Reducer Coupling with Tube Stop 2-5/8" x 1-5/8"
2-5/8
x
1-5/8
C165-0533-PH-CXC
Reducer Coupling with Tube Stop 2-5/8" x 1-3/8"
2-5/8
x
1-3/8
C165-0662-PH-CXC
Reducer Coupling with Tube Stop 3-1/8" x 2-5/8"
3-1/8
x
2-5/8
C165-0663-PH-CXC
Reducer Coupling with Tube Stop 3-1/8" x 2-1/8"
3-1/8
x
2-1/8
C165-0664-PH-CXC
Reducer Coupling with Tube Stop 3-1/8" x 1-5/8"
3-1/8
x
1-5/8
C165-0790-PH-CXC
Reducer Coupling with Tube Stop 3-5/8" x 3-1/8"
3-5/8
x
3-1/8
C165-0852-PH-CXC
Reducer Coupling with Tube Stop 4-1/8" x 2-5/8"
4-1/8
x
2-5/8
Reducer Couplings with
Tube Stops (FxC)
Part Code
Description
C410-0007-PH-FXC
Reducer Coupling FTG to C 3/8" x 1/4"
3/8
x
1/4
C410-0093-PH-FXC
C410-0032-PH-FXC
Reducer Coupling FTG to C 1/2" x 3/8"
1/2
x
3/8
C410-0033-PH-FXC
Reducer Coupling FTG to C 1/2" x 1/4"
1/2
x
1/4
C410-0058-PH-FXC
Reducer Coupling FTG to C 5/8" x 1/2"
5/8
x
1/2
C410-0059-PH-FXC
Reducer Coupling FTG to C 5/8" x 3/8"
5/8
x
3/8
C410-0093-PH-FXC
Reducer Coupling FTG to C 3/4" x 5/8"
3/4
x
5/8
C410-0094-PH-FXC
Reducer Coupling FTG to C 3/4" x 1/2"
3/4
x
1/2
1
2
72
Connections
1
2
www.pumph.co.uk 0115 900 5858
Copper Fittings
Reducer Couplings with
Tube Stops (FxC)
...continued
C410-0305-PH-FXC
1
2
Male Adaptor
(C x Male NPT)
C101-0050
1
2
Easy~Fit
Fixings
Flexi
Install +
Part Code
Description
Connections
1
2
C410-0095-PH-FXC
Reducer Coupling FTG to C 3/4" x 3/8"
3/4
x 3/8
C410-0107-PH-FXC
Reducer Coupling FTG to C 7/8" x 5/8"
7/8
x 5/8
C410-0108-PH-FXC
Reducer Coupling FTG to C 7/8" x 1/2"
7/8
x 1/2
C410-0109-PH-FXC
Reducer Coupling FTG to C 7/8" x 3/8"
7/8
x 3/8
7/8
x 3/4
C410-0149-PH-FXC
Reducer Coupling FTG to C 7/8" x 3/4"
C410-0159-PH-FXC
Reducer Coupling FTG to C 1-1/8" x 7/8"
1-1/8 x 7/8
C410-1498-PH-FXC
Reducer Coupling FTG to C 1-1/8" x 3/4"
1-1/8
x 3/4
C410-0160-PH-FXC
Reducer Coupling FTG to C 1-1/8" x 5/8"
1-1/8
x 5/8
C410-0161-PH-FXC
Reducer Coupling FTG to C 1-1/8" x 1/2"
1-1/8
x 1/2
C410-0222-PH-FXC
Reducer Coupling FTG to C 1-3/8" x 1-1/8"
1-3/8
x 1-1/8
C410-0223-PH-FXC
Reducer Coupling FTG to C 1-3/8" x 7/8"
1-3/8
x 7/8
C410-0224-PH-FXC
Reducer Coupling FTG to C 1-3/8" x 5/8"
1-3/8
x 5/8
C410-0303-PH-FXC
Reducer Coupling FTG to C 1-5/8" x 1-3/8"
1-5/8
x 1-3/8
C410-0304-PH-FXC
Reducer Coupling FTG to C 1-5/8" x 1-1/8"
1-5/8
x 1-1/8
C410-0305-PH-FXC
Reducer Coupling FTG to C 1-5/8" x 7/8"
1-5/8
x 7/8
C410-0306-PH-FXC
Reducer Coupling FTG to C 1-5/8" x 5/8"
1-5/8
x 5/8
C410-0398-PH-FXC
Reducer Coupling FTG to C 2-1/8" x 1-5/8"
2-1/8
x 1-5/8
C410-0399-PH-FXC
Reducer Coupling FTG to C 2-1/8" x 1-3/8"
2-1/8
x 1-1/8
C410-0400-PH-FXC
Reducer Coupling FTG to C 2-1/8" x 1-1/8"
2-1/8
x 1-1/8
C410-0401-PH-FXC
Reducer Coupling FTG to C 2-1/8" x 7/8"
2-1/8
x 7/8
C410-0402-PH-FXC
Reducer Coupling FTG to C 2-1/8" x 5/8"
2-1/8
x 5/8
C410-0531-PH-FXC
Reducer Coupling FTG to C 2-5/8" x 2-1/8"
2-5/8
x 2-1/8
C410-0532-PH-FXC
Reducer Coupling FTG to C 2-5/8" x 1-5/8"
2-5/8
x 1-5/8
C410-0533-PH-FXC
Reducer Coupling FTG to C 2-5/8" x 1-3/8"
2-5/8
x 1-3/8
C410-0662-PH-FXC
Reducer Coupling FTG to C 3-1/8" x 2-5/8"
3-1/8
x 2-5/8
C410-0663-PH-FXC
Reducer Coupling FTG to C 3-1/8" x 2-1/8"
3-1/8
x 2-1/8
C410-0664-PH-FXC
Reducer Coupling FTG to C 3-1/8" x 1-5/8"
3-1/8
x 1-5/8
C410-0754-PH-FXC
Reducer Coupling FTG to C 3-5/8" x 3-1/8"
3-5/8
x 3-1/8
C410-0850-PH-FXC
Reducer Coupling FTG to C 4-1/8" x 2-1/8"
4-1/8
x 2-1/8
C410-0852-PH-FXC
Reducer Coupling FTG to C 4-1/8" x 2-5/8"
4-1/8
x 2-5/8
C410-0854-PH-FXC
Reducer Coupling FTG to C 4-1/8" x 3-1/8"
4-1/8
x 3-1/8
Part Code
Description
C101-0005
Male Adaptor C x Male NPT 3/8" x 1/2"
3/8
x 1/2
C101-0007
Male Adaptor C x Male NPT 3/8" x 1/8"
3/8
x
1/8
C101-0025
Male Adaptor 1/2”x3/8” NPT 1/2" x 3/8"
1/2
x
3/8
C101-0050
Male Adaptor C x Male NPT 5/8" x 1/2"
5/8
x
1/2
C101-0057
Male Adaptor C x Male NPT 5/8" x 3/4"
5/8
x
3/4
C101-0058
Male Adaptor C x Male NPT 5/8" x 3/8"
5/8
x
3/8
C101-0100
Male Adaptor C x Male NPT 7/8" x 3/4"
7/8
x
3/4
C101-0150
Male Adaptor C x Male NPT 1-1/8" x 1"
1-1/8
x
1
C101-0159
Male Adaptor C x Male NPT 1-1/8" x 3/4"
1-1/8
x
3/4
Partners PH Family PH Motors Portable Service +
Squeezy
Connections
1
2
73
Copper Fittings
Copper Fittings
Install +
Male Adaptor
(C x Male NPT)
...continued
Female Adaptor
(C x Female NPT)
C105-0057
1
2
End Cap
C154-0050-PH-EC
74
...continued
Part Code
Description
Connections
1
2
C101-0215
Male Adaptor C x Male NPT 1-3/8" x 1-1/4"
3/8
x
1-1/4
C101-0295
Male Adaptor C x Male NPT 1-5/8" x 1-1/2"
5/8
x
1-1/2
C101-0390
Male Adaptor C x Male NPT 2-1/8" x 2"
2-1/8
x
2
Part Code
Description
C105-0025
Female Adaptor C x Female NPT 3/8" x 1/2"
3/8
x
1/2
C105-0050
Female Adaptor C x Female NPT 5/8" x 1/2"
5/8
x
1/2
C105-0057
Female Adaptor C x Female NPT 5/8" x 3/4"
5/8
x
3/4
C105-0058
Female Adaptor C x Female NPT 3/8" x 5/8"
3/8
x
5/8
C105-0059
Female Adaptor C x Female NPT 1/4" x 5/8"
1/4
x
5/8
C105-0100
Female Adaptor C x Female NPT 7/8" x 3/4"
7/8
x
3/4
C105-0107
Female Adaptor C x Female NPT 7/8" x 1/2"
7/8
x
1/2
C105-0150
Female Adaptor C x Female NPT 1-1/8" x 1"
1-1/8
x
1
C105-0159
Female Adaptor C x Female NPT 1-1/8" x 3/4"
1-1/8
x
3/4
C105-0215
Female Adaptor C x Female NPT 1-3/8" x 1-1/4"
1-3/8
x
1-1/4
C105-0295
Female Adaptor C x Female NPT 1-5/8" x 1-1/2"
1-5/8
x
1-1/2
C105-0390
Female Adaptor C x Female NPT 2-1/8" x 2"
2-1/8
x
2
Connections
1
2
Part Code
Description
Connections
C154-0002-PH-EC
Tube Cap 3/8"
3/8
C154-0025-PH-EC
Tube Cap 1/2"
1/2
C154-0050-PH-EC
Tube Cap 5/8"
5/8
C154-0090-PH-EC
Tube Cap 3/4"
3/4
C154-0100-PH-EC
Tube Cap 7/8"
7/8
C154-0150-PH-EC
Tube Cap 1-1/8"
1-1/8
C154-0215-PH-EC
Tube Cap 1-3/8"
1-3/8
C154-0295-PH-EC
Tube Cap 1-5/8"
1-5/8
C154-0390-PH-EC
Tube Cap 2-1/8"
2-1/8
C154-0520-PH-EC
Tube Cap 2-5/8"
2-5/8
C154-0650-PH-EC
Tube Cap 3-1/8"
3-1/8
C154-0750-PH-EC
Tube Cap 3-5/8"
3-5/8
C154-0850-PH-EC
Tube Cap 4-1/8"
4-1/8
www.pumph.co.uk 0115 900 5858
Copper Fittings
P Trap
C533-0050-PH
180 Degree Return Bend
Equal Tee (CxCxC)
C460-0090-PH-TEE
1
2
3
Reducing Tee (CxCxC)
Part Code
Description
Connections
C533-0050-PH
P Trap 5/8"
5/8
C533-0090-PH
P Trap 3/4"
3/4
C533-0100-PH
P Trap 7/8"
7/8
C533-0150-PH
P Trap 1-1/8"
1-1/8
C533-0215-PH
P Trap 1-3/8"
1-3/8
C533-0295-PH
P Trap 1-5/8"
1-5/8
C533-0390-PH
P Trap 2-1/8"
2-1/8
Part Code
Description
Connections
C180-0002-PH
Return Bend 180 Degree 3/8"
3/8
C180-0025-PH
Return Bend 180 Degree 1/2"
1/2
C180-0050-PH
Return Bend 180 Degree 5/8"
5/8
C180-0090-PH
Return Bend 180 Degree 3/4"
3/4
C180-0100-PH
Return Bend 180 Degree 7/8"
7/8
C180-0150-PH
Return Bend 180 Degree 1-1/8"
1-1/8
C180-0215-PH
Return Bend 180 Degree 1-3/8"
1-3/8
C180-0295-PH
Return Bend 180 Degree 1-5/8"
1-5/8
C180-0390-PH
Return Bend 180 Degree 2-1/8"
2-1/8
Part Code
Description
C460-0001-PH-TEE
Equal Tee 1/4"
1/4
1/4
1/4
C460-0002-PH-TEE
Equal Tee 3/8"
3/8
3/8
3/8
C460-0025-PH-TEE
Equal Tee 1/2"
1/2
1/2
1/2
C460-0050-PH-TEE
Equal Tee 5/8"
5/8
5/8
5/8
C460-0090-PH-TEE
Equal Tee 3/4"
3/4
3/4
3/4
C460-0100-PH-TEE
Equal Tee 7/8"
7/8
7/8
7/8
C460-0150-PH-TEE
Equal Tee 1-1/8"
1-1/8
1-1/8
1-1/8
C460-0215-PH-TEE
Equal Tee 1-3/8"
1-3/8
1-3/8
1-3/8
C460-0295-PH-TEE
Equal Tee 1-5/8"
1-5/8
1-5/8
1-5/8
C460-0390-PH-TEE
Equal Tee 2-1/8"
2-1/8
2-1/8
2-1/8
C460-0520-PH-TEE
Equal Tee 2-5/8"
2-5/8
2-5/8
2-5/8
C460-0650-PH-TEE
Equal Tee 3-1/8"
3-1/8
3-1/8
3-1/8
C460-0750-PH-TEE
Equal Tee 3-5/8"
3-5/8
3-5/8
3-5/8
C460-0850-PH-TEE
Equal Tee 4-1/8"
4-1/8
4-1/8
4-1/8
Part Code
Description
C460-0005-PH-RED-TEE
Reducing Tee 3/8" x 3/8" x 1/4"
3/8
3/8
1/4
C460-0006-PH-RED-TEE
Reducing Tee 3/8" x 3/8" x 1/2"
3/8
3/8
1/2
C460-0031-PH-RED-TEE
Reducing Tee 1/2" x 1/2" x 5/8"
1/2
1/2
5/8
C460-0032-PH-RED-TEE
Reducing Tee 1/2" x 1/2" x 3/8"
1/2
1/2
3/8
C460-0033-PH-RED-TEE
Reducing Tee 1/2" x 1/2" x 1/4"
1/2
1/2
1/4
C460-0040-PH-RED-TEE
Reducing Tee 1/2" x 3/8" x 1/2"
1/2
3/8
1/2
1
1
Connections
2
Connections
2
3
3
Continued...
Easy~Fit
Fixings
Flexi
Install +
Partners PH Family PH Motors Portable Service +
Squeezy
75
Copper Fittings
Copper Fittings
Install +
Reducing Tee (CxCxC)
...continued
C460-0118-PH-RED-TEE
1
2
3
76
...continued
Part Code
Description
C460-0041-PH-RED-TEE
Reducing Tee 1/2" x 3/8" x 3/8"
1/2
3/8
3/8
C460-0056-PH-RED-TEE
Reducing Tee 5/8" x 5/8" x 1-1/8"
5/8
5/8
1-1/8
C460-0057-PH-RED-TEE
Reducing Tee 5/8" x 5/8" x 7/8"
5/8
5/8
7/8
C460-0058-PH-RED-TEE
Reducing Tee 5/8" x 5/8" x 1/2"
5/8
5/8
1/2
C460-0059-PH-RED-TEE
Reducing Tee 5/8" x 5/8" x 3/8"
5/8
5/8
3/8
C460-0066-PH-RED-TEE
Reducing Tee 5/8" x 1/2" x 5/8"
5/8
1/2
5/8
C460-0067-PH-RED-TEE
Reducing Tee 5/8" x 1/2" x 1/2"
5/8
1/2
1/2
C460-0068-PH-RED-TEE
Reducing Tee 5/8" x 1/2" x 3/8"
5/8
1/2
3/8
C460-0076-PH-RED-TEE
Reducing Tee 5/8" x 3/8" x 1/2"
5/8
3/8
1/2
C460-0087-PH-RED-TEE
Reducing Tee 5/8" x 5/8" x 3/4"
5/8
5/8
3/4
C460-0092-PH-RED-TEE
Reducing Tee 3/4" x 3/4" x 7/8"
3/4
3/4
7/8
C460-0093-PH-RED-TEE
Reducing Tee 3/4" x 3/4" x 5/8"
3/4
3/4
5/8
C460-0094-PH-RED-TEE
Reducing Tee 3/4" x 3/4" x 1/2"
3/4
3/4
1/2
C460-0095-PH-RED-TEE
Reducing Tee 3/4" x 3/4" x 3/8"
3/4
3/4
3/8
C460-0098-PH-RED-TEE
Reducing Tee 3/4" x 5/8" x 5/8"
3/4
5/8
5/8
C460-0106-PH-RED-TEE
Reducing Tee 7/8" x 7/8" x 1-1/8"
7/8
7/8
1-1/8
C460-0107-PH-RED-TEE
Reducing Tee 7/8" x 7/8" x 5/8"
7/8
7/8
5/8
C460-0108-PH-RED-TEE
Reducing Tee 7/8" x 7/8" x 1/2"
7/8
7/8
1/2
C460-0109-PH-RED-TEE
Reducing Tee 7/8" x 7/8" x 3/8"
7/8
7/8
3/8
C460-0111-PH-RED-TEE
Reducing Tee 7/8" x 1/2" x 7/8"
7/8
1/2
7/8
C460-0117-PH-RED-TEE
Reducing Tee 7/8" x 5/8" x 7/8"
7/8
5/8
7/8
C460-0118-PH-RED-TEE
Reducing Tee 7/8" x 5/8" x 5/8"
7/8
5/8
5/8
C460-0119-PH-RED-TEE
Reducing Tee 7/8" x 5/8" x 1/2"
7/8
5/8
1/2
C460-0127-PH-RED-TEE
Reducing Tee 7/8" x 1/2" x 5/8"
7/8
1/2
5/8
C460-0157-PH-RED-TEE
Reducing Tee 1-1/8" x 1-1/8" x 1-5/8"
1-1/8
1-1/8
1-5/8
C460-0158-PH-RED-TEE
Reducing Tee 1-1/8" x 1-1/8" x 1-3/8"
1-1/8
1-1/8
1-3/8
C460-0159-PH-RED-TEE
Reducing Tee 1-1/8" x 1-1/8" x 7/8"
1-1/8
1-1/8
7/8
C460-1498-PH-RED-TEE
Reducing Tee 1-1/8" x 1-1/8" x 3/4"
1-1/8
1-1/8
3/4
C460-0160-PH-RED-TEE
Reducing Tee 1-1/8" x 1-1/8" x 5/8"
1-1/8
1-1/8
5/8
C460-0161-PH-RED-TEE
Reducing Tee 1-1/8" x 1-1/8" x 1/2"
1-1/8
1-1/8
1/2
C460-0169-PH-RED-TEE
Reducing Tee 1-1/8" x 7/8" x 1-1/8"
1-1/8
7/8
1-1/8
C460-0170-PH-RED-TEE
Reducing Tee 1-1/8" x 7/8" x 7/8"
1-1/8
7/8
1-1/8
C460-0171-PH-RED-TEE
Reducing Tee 1-1/8" x 7/8" x 5/8"
1-1/8
7/8
5/8
C460-0180-PH-RED-TEE
Reducing Tee 1-1/8" x 5/8" x 1-1/8"
1-1/8
5/8
1-1/8
C460-0181-PH-RED-TEE
Reducing Tee 1-1/8" x 5/8" x 7/8"
1-1/8
5/8
7/8
C460-0220-PH-RED-TEE
Reducing Tee 1-3/8" x 1-3/8" x 2-1/8"
1-3/8
1-3/8
2-1/8
1
Connections
2
www.pumph.co.uk 0115 900 5858
3
Copper Fittings
Reducing Tee (CxCxC)
...continued
C460-0247-PH-RED-TEE
1
2
3
Easy~Fit
Fixings
Flexi
Install +
Part Code
Description
C460-0220-PH-RED-TEE
Reducing Tee 1-3/8" x 1-3/8" x 1-5/8"
1-3/8
1-3/8
1-5/8
C460-0222-PH-RED-TEE
Reducing Tee 1-3/8" x 1-3/8" x 1-1/8"
1-3/8
1-3/8
1-1/8
C460-0223-PH-RED-TEE
Reducing Tee 1-3/8" x 1-3/8" x 7/8"
1-3/8
1-3/8
7/8
C460-0224-PH-RED-TEE
Reducing Tee 1-3/8" x 1-3/8" x 5/8"
1-3/8
1-3/8
5/8
C460-0234-PH-RED-TEE
Reducing Tee 1-3/8" x 1-1/8" x 1-3/8"
1-3/8
1-1/8
1-3/8
C460-0235-PH-RED-TEE
Reducing Tee 1-3/8" x 1-1/8" x 1-1/8"
1-3/8
1-1/8
1-1/8
C460-0357-PH-RED-TEE
Reducing Tee 1-3/8" x 1-1/8" x 5/8’"
1-3/8
1-1/8
5/8
C460-0245-PH-RED-TEE
Reducing Tee 1-3/8" x 7/8" x 1-3/8"
1-3/8
7/8
1-3/8
C460-0246-PH-RED-TEE
Reducing Tee 1-3/8" x 7/8" x 1-1/8"
1-3/8
7/8
1-1/8
C460-0247-PH-RED-TEE
Reducing Tee 1-3/8" x 7/8" x 7/8"
1-3/8
7/8
7/8
C460-0302-PH-RED-TEE
Reducing Tee 1-5/8" x 1-5/8" x 2-1/8"
1-5/8
1-5/8
2-1/8
C460-0303-PH-RED-TEE
Reducing Tee 1-5/8" x 1-5/8" x 1-3/8"
1-5/8
1-5/8
1-3/8
C460-0304-PH-RED-TEE
Reducing Tee 1-5/8" x 1-5/8" x 1-1/8"
1-5/8
1-5/8
1-1/8
C460-0305-PH-RED-TEE
Reducing Tee 1-5/8" x 1-5/8" x 7/8’"
1-5/8
1-5/8
7/8
C460-0306-PH-RED-TEE
Reducing Tee 1-5/8" x 1-5/8" x 5/8"
1-5/8
1-5/8
5/8
C460-0315-PH-RED-TEE
Reducing Tee 1-5/8" x 1-3/8" x 1-5/8"
1-5/8
1-3/8
1-5/8
C460-0316-PH-RED-TEE
Reducing Tee 1-5/8" x 1-3/8" x 1-3/8"
1-5/8
1-3/8
1-3/8
C460-0328-PH-RED-TEE
Reducing Tee 1-5/8" x 1-1/8" x 1-5/8"
1-5/8
1-1/8
1-5/8
C460-0330-PH-RED-TEE
Reducing Tee 1-5/8" x 1-1/8" x 1-1/8"
1-5/8
1-1/8
1-1/8
C460-0331-PH-RED-TEE
Reducing Tee 1-5/8" x 1-1/8" x 7/8"
1-5/8
1-1/8
7/8
C460-0339-PH-RED-TEE
Reducing Tee 1-5/8" x 7/8" x 1-5/8"
1-5/8
7/8
1-5/8
C460-0397-PH-RED-TEE
Reducing Tee 2-1/8" x 2-1/8" x 2-5/8"
2-1/8
2-1/8
2-5/8
C460-0398-PH-RED-TEE
Reducing Tee 2-1/8" x 2-1/8" x 1-5/8"
2-1/8
2-1/8
1-5/8
C460-0399-PH-RED-TEE
Reducing Tee 2-1/8" x 2-1/8" x 1-3/8"
2-1/8
2-1/8
1-3/8
C460-0400-PH-RED-TEE
Reducing Tee 2-1/8" x 2-1/8" x 1-1/8’"
2-1/8
2-1/8
1-1/8
C460-0401-PH-RED-TEE
Reducing Tee 2-1/8" x 2-1/8" x 7/8"
2-1/8
2-1/8
7/8
C460-0414-PH-RED-TEE
Reducing Tee 2-1/8" x 1-5/8" x 1-5/8"
2-1/8
1-5/8
1-5/8
C460-0416-PH-RED-TEE
Reducing Tee 2-1/8" x 1-5/8" x 1-1/8"
2-1/8
1-5/8
1-1/8
C460-0417-PH-RED-TEE
Reducing Tee 2-1/8" x 1-5/8" x 7/8"
2-1/8
1-5/8
7/8
C460-0429-PH-RED-TEE
Reducing Tee 2-1/8" x 1-3/8" x 2-1/8"
2-1/8
1-3/8
2-1/8
C460-0431-PH-RED-TEE
Reducing Tee 2-1/8" x 1-3/8" x 1-3/8"
2-1/8
1-3/8
1-3/8
C460-0432-PH-RED-TEE
Reducing Tee 2-1/8" x 1-3/8" x 1-1/8"
2-1/8
1-3/8
1-1/8
C460-0531-PH-RED-TEE
Reducing Tee 2-5/8" x 2-5/8" x 2-1/8"
2-5/8
2-5/8
2-1/8
C460-0532-PH-RED-TEE
Reducing Tee 2-5/8" x 2-5/8" x 1-5/8"
2-5/8
2-5/8
1-5/8
C460-0533-PH-RED-TEE
Reducing Tee 2-5/8" x 2-5/8" x 1-3/8"
2-5/8
2-5/8
1-3/8
C460-0534-PH-RED-TEE
Reducing Tee 2-5/8" x 2-5/8" x 1-1/8"
2-5/8
2-5/8
1-1/8
C460-0535-PH-RED-TEE
Reducing Tee 2-5/8" x 2-5/8" x 7/8"
2-5/8
2-5/8
7/8
C460-0549-PH-RED-TEE
Reducing Tee 2-5/8" x 2-1/8" x 2-1/8"
2-5/8
2-1/8
2-1/8
C460-0663-PH-RED-TEE
Reducing Tee 3-1/8" x 3-1/8" x 2-1/8"
3-1/8
3-1/8
2-1/8
C460-0664-PH-RED-TEE
Reducing Tee 3-1/8" x 3-1/8" x 1-5/8"
3-1/8
3-1/8
1-5/8
Partners PH Family PH Motors Portable Service +
Squeezy
1
Connections
2
3
77
Copper Fittings
Copper Fittings ...continued
Install +
U-Type Strap
C947-0090-PH
78
Part Code
Description
Connections
C947-0025-PH
U Strap 3/8"
3/8
C947-0050-PH
U Strap 5/8"
5/8
C947-0090-PH
U Strap 3/4"
3/4
C947-0100-PH
U Strap 7/8"
7/8
C947-0150-PH
U Strap 1-1/8"
1-1/8
C947-0215-PH
U Strap 1-3/8"
1-3/8
C947-0295-PH
U Strap 1-5/8"
1-5/8
C947-0390-PH
U Strap 2-1/8"
2-1/8
www.pumph.co.uk 0115 900 5858
Brass Fittings
Brass Fittings
Install +
Short Machine Flare Nut
DN1-10
Short Forged Flare Nut
DNS4-8
DNS4-12
Flare Tee
DT2-4
DT2-8
Cap
DN5-4
Plug
DP2-4
DP2-8
Flare and MPT Elbow
DE1-4B
Easy~Fit
DE1-8D
Fixings
Flexi
Install +
Part Code
Description
Pack Quantity
DN1-3
3/16" Short Nut
10
DN1-4
1/4" Short Nut
10
DN1-5
5/16" Short Nut
10
DN1-6
3/8" Short Nut
10
DN1-8
1/2" Short Nut
10
DN1-10
5/8" Short Nut
10
DN1-12
3/4" Short Nut
10
DN1-14
7/8" Short Nut
5
Part Code
Description
Pack Quantity
DNS4-4
1/4" Short Forged Flare Nut
10
DNS4-6
3/8" Short Forged Flare Nut
10
DNS4-8
1/2" Short Forged Flare Nut
10
DNS4-10
5/8" Short Forged Flare Nut
10
DNS4-12
3/4" Short Forged Flare Nut
10
DNS4-14
7/8" Short Forged Flare Nut
5
Part Code
Description
Pack Quantity
DT2-4
1/4" Flare Tee
10
DT2-6
3/8" Flare Tee
10
DT2-8
1/2" Flare Tee
10
DT2-10
5/8" Flare Tee
10
Part Code
Description
Pack Quantity
DN5-4
1/4" Cap
10
DN5-6
3/8" Cap
10
DN5-8
1/2" Cap
10
DN5-10
5/8" Cap
10
Part Code
Description
Pack Quantity
DP2-4
1/4" Plug
10
DP2-6
3/8" Plug
10
DP2-8
1/2" Plug
10
DP2-10
5/8" Plug
10
Part Code
Description
Pack Quantity
DE1-4B
1/4" Flare x 1/4" MPT Elbow
10
DE1-6C
3/8" Flare x 3/8" MPT Elbow
10
DE1-8D
1/2" Flare x 1/2" MPT Elbow
10
DE1-12E
3/4" Flare x 3/4" MPT Elbow
10
Partners PH Family PH Motors Portable Service +
Squeezy
79
Brass Fittings
Brass Fittings
Install +
Flare and MPT
Red Elbow
DE1-6B
Flare Union
DU2-4
DU2-8
Flare x Flare Swivel Union
DUS4-4
DUS4-6
Flare Union
DU1-4A
DU1-8B
Flare x FPT Union
DU3-6D
80
DU3-10E
...continued
Part Code
Description
Pack Quantity
DE1-6B
3/8" Flare x 1/4" MPT Red Elbow
10
DE1-6D
3/8" Flare x 1/2" MPT Red Elbow
10
DE1-8E
1/2" Flare x 3/4" MPT Red Elbow
10
DE1-8C
1/2" Flare x 3/8" MPT Red Elbow
10
DE1-10D
5/8" Flare x 1/2" MPT Red Elbow
10
DE1-12D
3/4" Flare x 1/2" MPT Red Elbow
10
Part Code
Description
Pack Quantity
DU2-4
1/4" Flare Union
10
DU2-6
3/8" Flare Union
10
DU2-8
1/2" Flare Union
10
DU2-10
5/8" Flare Union
10
DU2-12
3/4" Flare Union
10
DU2-14
7/8" Flare Union
5
Part Code
Description
Pack Quantity
DUS4-4
1/4" Flare x 1/4" Flare Swivel Union
10
DUS4-6
3/8" Flare x 3/8" Flare Swivel Union
10
DUS4-8
1/2" Flare x 1/2" Flare Swivel Union
10
Part Code
Description
Pack Quantity
DU1-4A
1/4" Flare x 1/8" MPT Union
10
DU1-4B
1/4" Flare x 1/4" MPT Union
10
DU1-6B
3/8" Flare x 1/4" MPT Union
10
DU1-6C
3/8" Flare x 3/8" MPT Union
10
DU1-6D
3/8" Flare x 1/2" MPT Union
10
DU1-6E
3/8" Flare x 3/4" MPT Union
10
DU1-8B
1/2" Flare x 1/4" MPT Union
10
DU1-8C
1/2" Flare x 3/8" MPT Union
10
DU1-8D
1/2" Flare x 1/2" MPT Union
10
DU1-8E
1/2" Flare x 3/4" MPT Union
10
DU1-10D
5/8" Flare x 1/2" MPT Union
10
DU1-10E
5/8" Flare x 3/4" MPT Union
10
DU1-12D
3/4" Flare x 1/2" MPT Union
10
DU1-12E
3/4" Flare x 3/4" MPT Union
10
Part Code
Description
Pack Quantity
DU3-6C
3/8" x 3/8” Flare x FPT Union
10
DU3-6D
3/8" x 1/2" Flare x FPT Union
10
DU3-8C
1/2" x 3/8" Flare x FPT Union
10
DU3-8D
1/2" x 1/2" Flare x FPT Union
10
DU3-10D
5/8" x 1/2" Flare x FPT Union
10
DU3-10E
5/8" x 3/4" Flare x FPT Union
10
www.pumph.co.uk 0115 900 5858
Access Fittings
Access
Fittings
Install +
Time is money, so they say, so our range of access valves and fittings are designed for
quick and easy installation on either OEM equipment or for refrigeration servicing. They can
be installed anywhere on either the high or low side for charging, purging, quick testing or
pressure checking. Our access fittings have 1/4" SAE male flare access ports and include a
quick seal cap and have a stainless and brass Schrader core fitted.
Part Code
Description
Pack Quantity
VA-3-346
3-Way Solder Type for 3/16" OD or 1/4" and 3/8" Solder Fitting
6
VA-34
Straight Solder Type 3/16” ODS x 1/4" ODF
6
VA-46
Straight Solder Type 1/4" ODS x 3/8" ODF
6
VAU-24
Half Union 1/8" MPT
6
VAU-45
Half Union 1/4" MPT
6
VAX-4
Extended Copper Tube 1/4" OD x 3/16" ID
6
VAX-4B
Extended Copper Tube 1/4" OD x 3/16" ID
1
VAX-4B-6
6” Extended Copper Tube 1/4" OD x 3/16" ID
1
VST-4
Swivel Tee with Depressor – 1/4" Access on Run 1/4" Female Flare with Depressor on
Female Swivel Branch End
3
VST-44
Swivel Tee with Depressor – 1/4" Access Run x 1/4" Access on T – Female Swivel on Run
3
VST-4X
Swivel Ree with Depressor – 1/4" Access on Run x 1/4" Female Flare with Depressor on
Female Swivel Branch End
3
VST-44X
Swivel Tee with Depressor – 1/4" Access on Run x 1/4" Access on T – Female Swivel on Run
3
VT-24
Threaded Tee – 1/8" MPT on Branch, 1/4" Flare x 1/4" Flare Access on Run
3
VTS-46
Solder Tee Type – 1/4" ODS x 1/4" ODS
3
VTS-68
Solder Tee Type – 3/8" ODS x 3/8" ODS
3
VTS-810
Solder Tee Type – 1/2" ODS x 1/2" ODS
3
VU-4
Female Flare Union – 1/4" Female Flare with Copper Gasket
6
VUR-4
Easy~Fit
Full Union – 1/4" OD Flare Tube with Forged Flare Nut
6
VC-4
Flare Cap – 1/4"
12
VVC-1
Valve Core
6
MSA-44
Adaptor – 1/4" Female Flare with Depressor x 1/4" MNPT
2
Fixings
Flexi
Install +
Partners PH Family PH Motors Portable Service +
Squeezy
81
Klo-Shure® Series 7
Klo-Shure®
Series 7
Partners
Klo-Shure® eliminates having to double-wrap, glue and tape the insulation on strut-mounted
clamps. Klo-Shure® insulation coupling reduces the time required to insulate copper tubing
used for refrigerant lines. The patented clamp allows sections of closed-cell insulation to be
secured at fixing points.
Features
• Reduces installation time
• Provides complete vapour barrier
without gluing or taping
• Improves finished appearance
Copper Pipe ID
Part Code
82
The Package
• Klo-Shure® Clamps Supplied in
Packs of 10 •
• Insulation wall thicknesses – 3/8",
1/2", 3/4" and 1"
• Pipe diameters from 1/4" up to
4-1/8"
• Manufactured by Hydra-Zorb
Related Products
DCP-30A/E/V
PAGE 23
DCP-35A
PAGE 24
Insulation Wall Thickness
3/8"
1/2"
3/4"
1"
1/4"
723025
–
726025
–
3/8"
723037
724037
726037
–
1/2"
723050
724050
726050
–
5/8"
723062
724062
726062
728062
3/4"
723075
724075
726075
–
7/8"
723087
724087
726087
728087
1"
723100
724100
–
–
1-1/8"
723112
724112
726112
728112
1-3/8"
723137
724137
726137
728137
1-5/8"
723162
724162
726162
728162
2-1/8"
723212
724212
726212
728212
2-5/8"
–
724262
726262
728262
3-1/8"
–
724312
726312
728312
3-5/8"
–
724362
726362
728362
4-1/8"
–
724412
726412
–
www.pumph.co.uk 0115 900 5858
Cushion Clamps
Cushion
Clamps
Install +
Get a grip – Cushion Clamps are the industry-established method of supporting copper
refrigerant tube, especially for multiple pipe runs. The zinc dichromate plating provides
excellent corrosion resistance and the polymer insert ensures a positive grip, absorbs
shock and vibration and prevents galvanic corrosion.
Features
• Stud securely fastened to one
clamp half
• Nylon insert nut assures a
positive lock
• Withstands effects of most oils,
chemicals and industrial cleaners, in
temperatures from -25°C to +125°C
• Available in 14 sizes from 1/4" to
4-1/8"
Easy~Fit
The Package
Related Products
Copper Fittings
PAGE 69-78
• Cushion Clamps Supplied in Packs
of 10/5 •
Part Code
Pipe Diameter
Pack Quantity
Part Code
Pipe Diameter
Pack Quantity
CC-004
1/4"
10
CC-022
1-3/8"
10
CC-006
3/8"
10
CC-026
1-5/8"
10
CC-008
1/2"
10
CC-034
2-1/8"
5
CC-010
5/8"
10
CC-042
2-5/8"
5
CC-012
3/4"
10
CC-050
3-1/8"
5
CC-014
7/8"
10
CC-058
3-5/8"
5
CC-018
1-1/8"
10
CC-066
4-1/8"
5
Fixings
Flexi
Install +
Partners PH Family PH Motors Portable Service +
Squeezy
83
Clips
Partners
Rapid Positioning Clips
Partners
Studded Clips
An industry-established
method of supporting copper
refrigerant tube is the channelmounted RPC. Ideal for
multiple pipe runs, the onepiece, composite polyamide
The studding clip is a unique one-piece design
(nylon) alloy clamp absorbs
manufactured from a composite polyamide alloy
shock and vibration.
combining strength with light weight. It will overcome the
problems of using cable ties for piping, electrical, optical
Features
and network cabling.
• One-piece (quick and easy to install)
• Suitable for A/C and refrigeration
pipework
• Suitable for temperatures -40°C
to + 140°C
• Available in 9 sizes from 1/4" to
1-5/8"
• Low moisture sensitivity and resistant
to solvents, hydrolysis battery acid
and salt solutions
84
Part Code
Tube OD
Pack
Quantity
RPC-0014
1/4"
10
RPC-0038
3/8"
10
RPC-0012
1/2"
10
RPC-0058
5/8"
10
RPC-0034
3/4"
10
RPC-0078
7/8"
10
RPC-0118
1-1/8"
10
RPC-0138
1-3/8"
10
RPC-0158
1-5/8"
10
Part Code
Stud
Size
Tube
OD
Pack
Quantity
Part Code
Stud
Size
Tube
OD
Pack
Quantity
SC08-15
M8
5/8"
10
SC10-15
M10
5/8"
10
SC08-20
M8
3/4"
10
SC10-20
M10
3/4"
10
SC08-22
M8
7/8"
10
SC10-22
M10
7/8"
10
SC08-25
M8
1"
10
SC10-25
M10
1"
10
SC08-28
M8
1-1/8"
10
SC10-28
M10
1-1/8"
10
SC08-32
M8
1-1/4"
10
SC10-32
M10
1-1/4"
10
SC08-35
M8
1-3/8"
10
SC10-35
M10
1-3/8"
10
SC08-40
M8
1-1/2"
10
SC10-40
M10
1-1/2"
10
SC08-42
M8
1-5/8"
10
SC10-42
M10
1 -5/8"
10
SC08-50
M8
2"
10
SC10-50
M10
2"
10
SC08-54
M8
2-1/8"
10
SC10-54
M10
2-1/8"
10
Related Products
Copper Fittings
PAGE 69-78
The Package
• RPC and Studded Clips are Supplied
in Packs of 10 •
www.pumph.co.uk 0115 900 5858
Clips
Partners
InsulClips Cable Tie
Channel Clips
Partners
The benefit of the InsulClips is
an uninterrupted vapour seal,
which eliminates the problem
of sweating on metal fittings.
This makes the InsulClip the ideal
product to secure the installation of
the refrigerant pipes, allowing the
vapour seal to run the length of the
pipework without cutting the
insulation material.
Made from a composite polyamide
(nylon) alloy, which has similar tensile
strength properties to nylon but
better impact strength, especially at
low temperatures.
Part Code
Tube OD
Pack
Quantity
IC00-15
5/8"
10
IC00-20
3/4"
10
IC00-22
7/8"
10
IC00-25
1"
10
IC00-28
1-1/8"
10
IC00-32
1-1/4"
10
IC00-35
1-3/8"
10
IC00-40
1-1/2"
10
IC00-42
1-5/8"
10
IC00-50
2"
10
IC00-54
2 -1/8"
10
The Package
• IC’s and CTC Clips Supplied in
Packs of 10 •
Easy~Fit
Fixings
Flexi
Install +
Insert into channel – Twist clockwise – Lock to secure
Channel cable tie clips accommodate PVC or metal cable
ties up to a width of 17mm and come in three support base
lengths of 50, 65 and 80mm.
The channel clips are secured on the channel with a twist lock motion ready
for the cable tie to be inserted to secure the refrigeration pipework.
Composite and Manufacture
Clips are made from a composite polyamide (nylon) alloy which has similar
tensile strength properties to nylon but better impact strength, especially at
low temperatures.
Dimensions
RPC, InsulClips and Cable Tie Channel Clips fit all preformed channels, with
a profile width of 41mm and an inturned channel lip of 10mm width and
7mm depth.
Technical Data
Clips can be used in temperatures ranging from -40 to 140°C. They have
a melting point of 220°C. They can withstand pressures up to 40MPa, with
less than 4% deformation, and provide high resistance to mechanical stress
creep. As well as resisting all known solvents, the clips have a low moisture
sensitivity. They also have stable electrical and vibration properties and a
high resistance to UV light.
Part Code
Size
Pack
Quantity
CTC-050
50mm
10
CTC-065
65mm
10
CTC-080
80mm
10
Partners PH Family PH Motors Portable Service +
Related Products
Cable Ties
Squeezy
PAGE 49
85
Hangers and Clamps
Threaded Rod Hangers
and Flow and Return Clamps
Squeezy
Squeezy~Fit Threaded Rod Hangers
These clamps support a pair of flow and
return insulated copper air conditioning pipes
on either M8 or M10 threaded rod. By simply
squeezing the tips together the spring steel
rod hanger can be fitted or adjusted in
seconds, even after the refrigerant pipes have
been installed.
Features
• Instant fitting and adjustment
• Folding lock-tab secures pipes
into strap
• Black zinc coating matches
insulation colour and offers
corrosion resistance
Part Code
Description
Liquid Pipe
Diameter
Gas Pipe
Diameter
Threaded Rod
Diameter
TRH-1
TRH-1 Size 1/4" by 1/2"
1/4"
1/2"
M8 / M10
TRH-2
TRH-2 Size 3/8" by 5/8"
3/8"
5/8"
M8 / M10
TRH-3
TRH-3 Size 1/2" by 7/8"
1/2"
7/8"
M8 / M10
TRH-4
TRH-4 Size 5/8" by 1-1/8"
5/8"
1-1/8"
M8 / M10
Flow and Return Clamps
The asymmetric design provides a perfect fit for any one of
four pairs of flow and return insulated refrigerant pipes. An
8mm clearance hole allows the clamp to be fixed directly to
any flat surface, such as a wall or ceiling.
Features
• Folding lock-tab secures pipes
into strap
• Black zinc coating matches
insulation colour and offers
corrosion resistance
Part Code
Description
Liquid Pipe
Diameter
Gas Pipe
Diameter
Threaded Rod
Diameter
FRC-1
FRC-1 Size 1/4" by 1/2"
1/4"
1/2"
8mm
FRC-2
FRC-2 Size 3/8" by 5/8"
3/8"
5/8"
8mm
FRC-3
FRC-3 Size 1/2" by 7/8"
1/2"
7/8"
8mm
FRC-4
FRC-4 Size 5/8" by 1-1/8"
5/8"
1-1/8"
8mm
Related Products
Threaded Rod
86
PAGE 115
The Package
• TRH and FRC Clamps Supplied in
Packs of 10 •
www.pumph.co.uk 0115 900 5858
Vibration Absorbers
Vibration
Absorbers
Install +
Vibration absorbers are designed for installation in the suction and discharge for installation
lines of air conditioning and refrigeration systems to dampen the transmission of
compressor-induced vibration through system piping.
Features
The Package
Material
• Unique oxygen brazing between
copper socket and stainless
steel ferrule
• Available in 14 sizes to fit refrigerant
tubes from 1/4" to 4-1/8"
• Stainless steel corrugated tubing
and high tensile wire braid
• Cleaned and dehydrated before
packaging
• Individually packed in plastic film
and carton box
Tube End
DHP Copper
Ferrule
Stainless Steel SYS304
Wire Brand
Stainless Steel SYS304
Flexible Tubing
Stainless Steel SYS304
Brazed Joint
Brass
• Vibration Absorber •
Pump House declare that the above
vibration absorbers comply with the
appropriate ESSENTIAL SAFETY
REQUIREMENT described in
Annex 1 of the 97/23/EC pressure
equipment directive.
Part Code
Description
Tube OD (inches)
Tube OD (mm)
Max. Working Pressure (psiG)
Burst Pressure (psiG)
VIBA-1/4
Vibration Absorber 1/4" (6mm)
1/4"
6mm
650 (44.8 bar)
3250 (224 bar)
VIBA-3/8
Vibration Absorber 3/8" (10mm)
3/8"
10mm
650 (44.8 bar)
3250 (224 bar)
VIBA-1/2
Vibration Absorber 1/2" (12mm)
1/2"
12mm
650 (44.8 bar)
3250 (224 bar)
VIBA-5/8
Vibration Absorber 5/8" (16mm)
5/8"
16mm
650 (44.8 bar)
3250 (224 bar)
VIBA-3/4
Vibration Absorber 3/4" (18mm)
3/4"
18mm
650 (44.8 bar)
3250 (224 bar)
VIBA-7/8
Vibration Absorber 7/8" (22mm)
7/8"
22mm
650 (44.8 bar)
3250 (224 bar)
VIBA-1-1/8
Vibration Absorber 1-1/8" (28mm)
1-1/8"
28mm
600 (41.3 bar)
3000 (206.8 bar)
VIBA-1-3/8
Vibration Absorber 1-3/8" (35mm)
1-3/8"
35mm
550 (37.9 bar)
2750 (189.6 bar)
VIBA-1-5/8
Vibration Absorber 1-5/8" (42mm)
1-5/8"
42mm
510 (35.1 bar)
2550 (175.8 bar)
VIBA-2-1/8
Vibration Absorber 2-1/8" (54mm)
2-1/8"
54mm
400 (27.5 bar)
2000 (137.8 bar)
VIBA-2-5/8
Vibration Absorber 2-5/8" (64mm)
2-5/8"
64mm
350 (24.1 bar)
1750 (120.6 bar)
VIBA-3-1/8
Vibration Absorber 3-1/8" (76mm)
3-1/8"
76mm
320 (22.0 bar)
1600 (110.3 bar)
VIBA-3-5/8
Vibration Absorber 3-5/8" (89mm)
3-5/8"
89mm
190 (13.1 bar)
570 (39.3 bar)
VIBA-4-1/8
Vibration Absorber 4-1/8" (108mm)
4-1/8"
108mm
190 (13.1 bar)
570 (39.3 bar)
Easy~Fit
Fixings
Flexi
Install +
Partners PH Family PH Motors Portable Service +
Squeezy
87
Multi-Fit Fan Motors
Multi-Fit
Fan Motors
PHF Motors
Universal, multi-fit fan motors are ideal for replacement in nearly all industrial and commercial
refrigeration and ventilation equipment.
Features
• Individually-boxed complete
with fixings
Related Products
High Efficiency Motors
PAGE 90
The Package
• Multi-Fit Fan Motor with 1 metre
Power Lead •
• 1 metre power cord for greater
flexibility during installation
• CE-certified/ROHS-2 compliant
• One year, no quibble warranty
88
Part Code
Description
Watts
Voltage
Frequency
Revs
Cable
Length
FM-5W
5W Multi-Fit Fan Motor
5W
240V
50 / 60Hz
1300 / 1500rpm
1m
FM-7W
7W Multi-Fit Fan Motor
7W
240V
50 / 60Hz
1300 / 1500rpm
1m
FM-10W
10W Multi-Fit Fan Motor
10W
240V
50 / 60Hz
1300 / 1500rpm
1m
FM-16W
16W Multi-Fit Fan Motor
16W
240V
50 / 60Hz
1300 / 1500rpm
1m
FM-18W
18W Multi-Fit Fan Motor
18W
240V
50 / 60Hz
1300 / 1500rpm
1m
FM-25W
25W Multi-Fit Fan Motor
25W
240V
50 / 60Hz
1300 / 1500rpm
1m
FM-34W
34W Multi-Fit Fan Motor
34W
240V
50 / 60Hz
1300 / 1500rpm
1m
www.pumph.co.uk 0115 900 5858
Tangential Fan Motors
Tangential
Fan Motors
PHF Motors
Tangential single-impeller fan motor assemblies with aluminium blades. Ideal for replacement
in nearly all industrial and commercial refrigeration and ventilation equipment.
Related Products
Features
• Individually-boxed complete
with fixing
• CE-certified/ROHS-2 compliant
• One year, no quibble warranty
Multi-Fit Motors
The Package
PAGE 88
• Tangential Fan Motor •
Part Code
Description
Watts
Blade Length
Rotate Speed
Air Flow
FMTS-15W-90
15W with 90mm Tangential Blade
15 W
90mm
2300rpm
65m³/h
FMTS-15W-120
15W with 120mm Tangential Blade
15 W
120mm
2200rpm
80m³/h
FMTS-20W-180
20W with 180mm Tangential Blade
20 W
180mm
2000rpm
120m³/h
FMTS-30W-240
30W with 240mm Tangential Blade
30 W
240mm
2100rpm
170m³/h
FMTS-30W-300
30W with 300mm Tangential Blade
30 W
300mm
1900rpm
190m³/h
Easy~Fit
Fixings
Flexi
Install +
Partners PH Family PH Motors Portable Service +
Squeezy
89
ECM High Efficiency Fan Motors
ECM
High Efficiency
Fan Motors
PHF Motors
These high efficiency ECM electronically commutated motors are far more efficient than the
conventional shaded pole motor. The ECM’s provide the same output performance with
input power reductions of up to 70%. This saves energy and reduces the amount of CO²
emissions – please see the chart below. These plastic housing motors run cool, are IP65
rated and will directly replace a standard multi-fit refrigeration motor.
The Package
Features
• Motor has over current, over and
under voltage protection
• IP65 rated
• 450mm power cord
• CE-certified/ROHS 2011/65/EU
compliant
• One year, no-quibble warranty
• Individually boxed
• Ambient operating temperature
between -30ºC to +50ºC
• Maintenance free with ball bearing
sleeve to extend the life and provide
quiet operation
• Direct replacement for standard
multi-fit refrigeration motors
• ECM Fan Motor with 450mm Power
Lead •
Related Products
Multi-Fit Motors
PAGE 88
ECM High Efficiency Fan Motor
2.5W – 23.5W
230V
50 / 60Hz
1300rpm
450mm
FM-ECM-7120
ECM High Efficiency Fan Motor
3.4W – 22.8W
230V
50 / 60Hz
1300rpm
450mm
Part Code
22°
25°
28°
31°
FM-ECM-7120
FM-ECM-7112
FM-ECM-7112
450mm
FM-ECM-7108
1300rpm
FM-ECM-7120
50 / 60Hz
FM-ECM-7112
230V
FM-ECM-7108
2.5W – 7.5W
FM-ECM-7120
ECM High Efficiency Fan Motor
FM-ECM-7112
FM-ECM-7108
FM-ECM-7108
Cable Length
FM-ECM-7120
Revs
FM-ECM-7112
Frequency
FM-ECM-7108
Voltage
FM-ECM-7120
Watts
FM-ECM-7112
Description
FM-ECM-7108
Part Code
34°
Fan Ø
90
154mm
2.5W
–
–
2.6W
–
–
3.2W
–
–
3.6W
–
–
4.1W
–
–
172mm
3.3W
–
3.4W
3.6W
–
3.7W
4.2W
–
4W
5.1W
4.8W
5W
6.0W
5.6W
5.4W
200mm
4.8W
4.4W
4.4W
5.8W
5.2W
5.2W
6.5W
5.3W
5.8W
–
7.1W
6.6W
–
7.8W
8W
230mm
–
9.7W
9.7W
–
12W
8.4W
–
14.8W
9.6W
–
17.5W
11W
–
20W
13.2W
254mm
–
15.1W
15.1W
–
18.5W
12.2W
–
23.5W
14.8W
–
–
17.2W
–
–
20.4W
300mm
–
–
–
–
–
22.8W
–
–
–
–
–
–
–
–
–
www.pumph.co.uk 0115 900 5858
Fan Accessories
Fan Ring
Fan Motor
Fan Blade
Fan Guard
Fan Bracket
Fan
Accessories
Fan Blades –
PHF Motors
Sucker, Blower,
Rings, Guards
and Brackets
A complete range of pressed aluminium blades, fan rings, guards and brackets to suit
multi-fit fan motors. Available in a variety of diameters and pitches to suit most refrigeration
applications. All accessories can be sold as individual items or as a complete assembly
combined to create your own fan requirement.
Fan Blades – Sucker
Fan Blades – Blower
Part Code
Description
Diameter
Pitch
Part Code
Description
Diameter
Pitch
FBS-154-25
154/25 Sucker
154mm
25º
FBB-154-25
154/25 Blower
154mm
25º
FBS-154-31
154/31 Sucker
154mm
31º
FBB-154-31
154/31 Blower
154mm
31º
FBS-172-25
172/25 Sucker
172mm
25º
FBB-172-25
172/25 Blower
172mm
25º
FBS-172-31
172/31 Sucker
172mm
31º
FBB-172-31
172/31 Blower
172mm
31º
FBS-200-25
200/25 Sucker
200mm
25º
FBB-200-25
200/25 Blower
200mm
25º
FBS-200-31
200/31 Sucker
200mm
31º
FBB-200-31
200/31 Blower
200mm
31º
FBS-230-25
230/25 Sucker
230mm
25º
FBB-230-25
230/25 Blower
230mm
25º
FBS-230-31
230/31 Sucker
230mm
31º
FBB-230-31
230/31 Blower
230mm
31º
FBS-254-25
254/25 Sucker
254mm
25º
FBB-254-25
254/25 Blower
254mm
25º
FBS-254-31
254/31 Sucker
254mm
31º
FBB-254-31
254/31 Blower
254mm
31º
FBS-300-25
300/25 Sucker
300mm
25º
FBB-300-25
300/25 Blower
300mm
25º
FBS-300-31
300/31 Sucker
300mm
31º
FBB-300-31
300/31 Blower
300mm
31º
Fan Ring
Fan Guard
Fan Bracket
Part Code
Diameter
Part Code
Diameter
Part Code
Height
Width
Depth
FRS-154
154 mm
FG-154
154mm
FBR-109-1
109mm
81mm
24mm
FRS-172
172 mm
FG-172
172mm
FBR-109-2
109mm
78mm
39mm
FRS-200
200 mm
FG-200
200mm
FBR-109-3
109mm
78mm
49mm
FRS-230
230 mm
FG-230
230mm
FBR-39
39mm
–
–
FRS-254
254 mm
FG-254
254mm
FBR-55
55mm
–
–
FRS-300
300 mm
FG-300
300mm
FBR-72
72mm
–
–
FBR-84
84mm
–
–
Easy~Fit
Fixings
Flexi
Install +
Partners PH Family PH Motors Portable Service +
Squeezy
91
Axial Fan Motors
Axial Fan
Motors
PHF Motors
These axial shaded pole fan motors have a compact structure and small volume. They
are made out of reinforced plastic, are lightweight, low noise and used on refrigeration
equipment, bottle coolers, vending machines and other ventilating and cooling equipment.
Features
The Package
Related Products
• Individually boxed
• Ambient operating temperature
-20°C to +60°C
Multi-Fit Motors
• Axial Fan Motor with Lead
or Terminal •
PAGE 88
• Ball bearing motor
• Average service life 30,000 hours
• Air flow from 40m³/hr – 132m³/hr
• CE certified / ROHS-2 compliant
• One year warranty
92
Part Code
Description
Watts
Voltage
Frequency
Revs
Cable
Length
FM-A-8038-L
Axial Fan Motor 40m³/hr (With Lead)
15W
240V
50Hz
2200rpm
300mm
FM-A-12025-L
Axial Fan Motor 71m³/hr (With Lead)
13W
240V
50Hz
1800rpm
300mm
FM-A-12038-L
Axial Fan Motor 132m³/hr (With Lead)
20W
240V
50Hz
2500rpm
300mm
FM-A-12038-T
Axial Fan Motor 132m³/hr (With Terminal)
20W
240V
50Hz
2500rpm
N/A
Part Code
Description
Height
Width
Depth
Air Flow
dB(A) Rating
FM-A-8038-L
Axial Fan Motor 40m³/hr (With Lead)
80mm
80mm
38mm
40m³/hr
23.4 dB(A)
FM-A-12025-L
Axial Fan Motor 71m³/hr (With Lead)
120mm
120mm
26mm
71m³/hr
35.6 dB(A)
FM-A-12038-L
Axial Fan Motor 132m³/hr (With Lead)
120mm
120mm
38mm
132m³/hr
37.3 dB(A)
FM-A-12038-T
Axial Fan Motor 132m³/hr (With Terminal)
120mm
120mm
38mm
132m³/hr
37.3 dB(A)
www.pumph.co.uk 0115 900 5858
Pro Range and G2G Range
Pro Range
Partners
Already established as a leading
brand of professional coil cleaning and
maintenance products, the DiversiTech
PRO-RANGE of concentrated coil
cleaners are designed to provide
outstanding cleaning results combined
with minimal environmental impact and
maximum economy.
G2G Range
The DiversiTech G2G range (Good to
Go) are pre-mixed coil cleaners in 1 litre
convenient trigger bottles for quick and
easy application. This range also has a
1 litre leak detector spray available.
Features
• 5 litre concentrates for best value
• Generous mix ratios ensure
maximum economy
• NSF Food Safe products available
• G2G (Good to Go) pre-mixed
bottles for convenience
• Disinfectant cleaners available
• Odour control and elimination
products available
PRO-UNIVERSAL and G2G-UNIVERSAL
coil cleaners are now NSF Food Safe
registered, making them the ideal
product to use in and around food
processing areas.
Easy~Fit
Fixings
Flexi
Install +
Part Code
Description
Quantity
Suitable for Use on...
PRO-UNIV-GB
Pro-Universal Concentrated Coil Cleaner
5 litres
Condensers, Evaporators
and Air Filters
PRO-FOAM+-GB
Alkaline-based Concentrated Coil Cleaner
5 litres
Condensers
PRO-CARE-GB
Evaporator Coil Cleaner and Disinfectant
5 litres
Evaporators, Protecting
and Disinfecting
PRO-CLEAN-GB
Alkaline-based Evaporator and
Condensing Coil Cleaner
5 litres
Condensers and
Evaporators
PRO-COOL-GB
Non-odour Concentrated Liquid Ice
Machine Cleaner
5 litres
Ice Machines
PRO-SCALE-GB
Lime Scale Concentrated Remover
5 litres
Condensers and
Exchangers
PRO-GREEN-GB
Environmentally Friendly Concentrated
Coil Cleaner
5 litres
Condensers, Evaporators
and Air Filters
GRAN-UNIV-GB
Granular Coil Cleaner
480g
Condensers, Evaporators
and Air Filters
Part Code
Description
Quantity
Suitable for Use on...
G2G-UNIV-GB
Pro-Univeral Pre-Mixed Coil Cleaner
1 litre
Condensers, Evaporators
and Air Filters
G2G-FOAM+-GB
Pre-Mixed Alkaline-based Foaming
Coil Cleaner
1 litre
Condensers
G2G-CARE-GB
Pre-Mixed Liquid Coil Cleaner and
Disinfectant
1 litre
Evaporators, Protecting
and Disinfecting
G2G-GREEN+-GB
Environmentally Friendly Pre-Mixed
Coil Cleaner
1 litre
Condensers, Evaporators
and Air Filters
G2G-BUBBLE-GB
Pre-Mixed Bubble Up Leak Detector
1 litre
Leak Detection
Partners PH Family PH Motors Portable Service +
Squeezy
93
Aerosol and Odour Elimination Products
Aerosols
Service +
Pump House have recently produced a
range of own-brand aerosol cleaners.
These professional aerosols are the perfect
blend of high performance and excellent
economy. The range includes a universal coil
cleaner, evaporator cleaner and disinfectant,
a case and hard surface cleaner and a leak
detector spray.
Part Code
Description
Quantity
Suitable for Use on...
AER-O-500
Solvent Based Outdoor Coil Cleaner
500ml
Cleaning Condensers
AER-F-600
Foaming Outdoor Coil Cleaner
600ml
Cleaning Condensers
AER-I-600
Indoor Coil Cleaner and Disinfectant
600ml
Cleaning and Disinfecting Indoor Coils
AER-B-500
Bubble Up Leak Detector Spray
500ml
Detecting Leaks on Pipework and Equipment
AER-C-600
Case and Diffuser Cleaner
600ml
Cleaning of Casework and Hard Plastics
AER-D-600
Dual Purpose Coil Cleaner
600ml
Cleaning of Indoor and Outdoor Coils
ZAP-UNIV
Pro-Universal Aerosol
562ml
Cleaning of Indoor and Outdoor Coils
FRESH-COIL-GB
Coil Cleaner and Deodoriser with Nozzle and Applicator Hose
445ml
Cleaning and Deodorising Indoor Coils
Odour Elimination
Products
Service +
Smelly AC units? Throw away that peg and use
DiversiTech Smell Buster – a unique odour elimination
product which is not a cover up perfume, but actually
removes unpleasant smells from the air. It eliminates
odours caused by smoke, mould, mildew, cat litter and
pets, as well as noxious smells created by ammonia,
hydrogen sulphide and other chemicals.
Easy-to-use Smell Buster has a pleasant, fresh smell.
Part Code
Description
Quantity
Suitable for Use on...
SMELL-BUSTER-SMALL
Smell-Buster – 12g tablets – 10 pack
10 x 12g
Odour Elimination in RAC Systems
SMELL-BUSTER
Smell-Buster – 60g tablets – 2 pack
2 x 60g
Odour Elimination in RAC Systems
SMELL-BUSTER-8
Smell-Buster – 225g tub
1 x 225g
Odour Elimination in RAC Systems
G2G-SMELL-BUSTER
Liquid Smell-Buster – 1 litre spray
1 litre
Odour Elimination in RAC Systems
94
www.pumph.co.uk 0115 900 5858
Hand Held and Power Sprayers
1002
2602
PS-1-UK
Hand
Held and
Power
Sprayers
Partners
There are a number of options available for spraying coil cleaners on to the coils, from
simple hand held and compression sprayers to high capacity electric power sprayers.
The DiversiTech PS-1 Portable Backpack Power Sprayer is a highly efficient machine
designed for fast and easy application of coil cleaning products. Powered by a 12V / 10Ah
rechargeable battery, the sprayer saves labour time as it is 3 to 4 times more efficient than a
conventional compression sprayer. The sprayer can be operated continuously for up to 10
hours, enough to spray approx. 110 gallons of coil cleaner, holds 15.2 litres and has a low
battery warning when down to 20% battery life (approx. 2 hours remaining) of battery life left.
Features
• Streamline contour with adjustable
straps – comfortable to carry on
the back
• Mini-diaphragm pump with pressure
protection switch to prevent overpressurization
• Automatic start/stop feature
on trigger
• Large filler neck for fast and
safe refilling
• 15.2 litre capacity – less
refilling required
Easy~Fit
Fixings
Flexi
Install +
The Package
• Power Sprayer • Wand and Sprayer
Head • Spare Sprayer and Adaptors
• Charger • Operating Instructions •
Part Code
Description
Capacity
PS-1-UK
Portable Electric Backpack Sprayer
15.2 litres
1002
Hand Held Sprayer
1.4 litres
2601
1 Gallon Compression Wand Sprayer
3.8 litres
2602
2 Gallon Compression Wand Sprayer
7.4 litres
2603
3 Gallon Compression Wand Sprayer
11.4 litres
Partners PH Family PH Motors Portable Service +
Squeezy
95
Diversi-Flush™ Kit
Partners
DiversiFlush™ Kit
Dirty and contaminated system? Diversi-Flush™ to the rescue! A unique system and line
cleaning solution, ideal for dealing with compressor burn outs, R22 retrofits and equipment
upgrades and replacements.
Diversi-Flush™ effectively removes all traces of residual oil and contaminants from the entire system. The easy-touse kit includes everything needed to quickly and effectively clean through the entire system.
Diversi-Flush™ Solvent is a non-Volatile Organic Compound (VOC), residue-free and complies with the
Environmental Protection Agency (EPA) and the Significant New Alternatives Program (SNAP) standards.
Features
• No pump required
• Low toxicity, non-flammable and residue free
• Fast, easy-to-use and low cost
• Can be used on any type of equipment
• Self-contained kit with replaceable solvent refills
• High evaporation rate solvent ensures easy and complete removal from
the system
• The kit includes a line set adaptor to connect the flow and return lines
96
The Package
• 1 x Cylinder • 1 x Refill • 1 x Injector
Tool and Hose • 1 x Adaptor • 1 x
Funnel • Operating Instructions •
Part Code
Description
Suitable for Use on...
PF-KIT-EU
Diversi-Flush™ HVAC Flushing Kit – Includes Refill (480ml)
Compressor Burnouts, Refrigerant Retrofits and Upgrades
PF-16-EU
Diversi-Flush™ HVAC Flushing Solvent Refill (480ml)
Compressor Burnouts, Refrigerant Retrofits and Upgrades
PF-ADAPTOR
Diversi-Flush™ Line Set Adaptor
Compressor Burnouts, Refrigerant Retrofits and Upgrades
www.pumph.co.uk 0115 900 5858
Gallo Gun and Nitrogen Purge Tool
Partners
Gallo Gun
Drain Line
Cleaner
Blocked drain line? No problem with a Gallo-Gun! The DiversiTech Gallo Gun is a
lightweight, portable tool designed to unblock condensate drain lines and other pipework
instantly. Simply insert a CO2 cartridge into the Gallo Gun and with a press of the trigger
and SWOOSH... 800 psi of food grade CO2 blows the blockage out – job done!
Features
•
•
•
•
•
Small and Lightweight to handle
Quick and easy to use with no mess
Uses Environmentally Friendly CO2
Flexible hose for hard to reach areas
Safety catch to prevent accidental
discharge
• Optional 3 piece adaptor kit available
Part Code
Description
Quantity
What’s in the Package...
GG-1
Gallo Gun Drain Line Cleaner
1
1 x Gallo Gun Drain Line Cleaner
GG-6
Gallo Gun Drain Line Cleaner –
Pack of 6 CO2 Cartridges
6
6 x Single Use CO2 Cartridges
GG-1A
Gallo Gun Drain Line Cleaner –
Adaptor Kit
1
3 x Adaptors for Larger Tubes, Oil
Lines and 90° Angles
GG-1H
Gallo Gun Drain Line Cleaner –
Hose Assembly
1
1 x Gallo Gun Hose Assembly
Partners
DP-1
Nitrogen
Purge Tool
The DP-1 Nitrogen Purge Tool is a quick and easy way to purge copper pipes with nitrogen.
Then, with a turn of the dial, quickly switch to a very low flow of nitrogen to properly braze
the copper. It has a durable aluminium design so you can just throw it into your tool bag
when you are done.
Part Code
Description
Quantity
Used for...
DP-1
Nitrogen Purge Tool
1
Purging and controlling the flow of nitrogen through pipework during brazing
Easy~Fit
Fixings
Flexi
Install +
Partners PH Family PH Motors Portable Service +
Squeezy
97
Lubricants and Sealants
Lubricants and Sealants
Partners
Pro-Bubble Spray
Leak Detector
Pro-Bubble is an easy-to-use leak
detector spray ideal for locating
gas and air leaks in pipes and
equipment. Pro-Bubble will not attack
or react with metal surfaces and is
highly efficient for the detection of
ammonia, refrigerant gas, and air
leaks at below freezing temperatures.
Features
• Clinging formula allows detection of
microscopic gas leaks
• Pinpoint leaks in any pressurized
gas system
• Non-toxic, oxygen safe,
non-corrosive
98
Cool-Weld™ Heat
Barrier Spray
Pull a Spout Oiler
Cool-Weld™ is a spray-on gel heat
shield for soldering, sweating and
welding. Ideal for use on filter driers,
pipes, valves, sheet metal, etc. Can
be used on porous surfaces such as
fabrics or drywall. As long as there
is some Cool-Weld™ present the
surface will resist charring.
Features
An all-purpose oiler with a 35cm
telescoping spout. Squeeze-bottle
action for general industrial use.
WD-40
The classic and best water
disperser available, WD-40 loosens
rusted part, stops squeaks, removes
tar, grease and adhesives fast
and effectively.
• Eliminates heat transfer to
surrounding areas
• Wets and completely protects
sensitive areas
• Safe, non-toxic and non-corrosive
• Odourless and non-staining
Part Code
Description
Quantity
Suitable for Use on...
PRO-BUBBLE-32
Pro-Bubble Leak Detector Spray
1
Finding leaks on refrigeration and AC systems
COOLWELD-32
Cool-Weld Heat Barrier Gel Spray
1
Heat barrier gel for soldering, sweating and welding
CO-1
Pull a Spout Oiler – 4oz (118ml)
12
General lubrication of moving parts
741-001
WD-40 (237ml)
1
Protection, lubrication and releasing of seized parts
741-002
WD-40 (325ml)
1
Protection, lubrication and releasing of seized parts
www.pumph.co.uk 0115 900 5858
Lubricants and Sealants
Pro Tite™ Resin Based
Thread Sealant
Expanding Foam Sealant
Diversi-Gum Sealing
Compound
A one component closed-cell
expanding polyurethane foam sealant
Leaking Joints? – Not anymore
that is tack free in 20 minutes. Can be
with Pro-Tite sealant. A resin-based
thread sealant that adheres to internal painted to prevent UV damage after
surfaces and fills voids while forming 12 hours of drying time. Used to seal
around doors, windows, pipes, ducts
a fluid tight seal. Sealing from full
and vents – in fact virtually anywhere.
vacuum up to 10.000 psi Pro-Tite
is specially formulated for use on
metals and plastics subject to extreme
vibration. Having a temperature range
between -73°C to 204°C Pro-Tite
is impervious to most chemicals,
including refrigerants, petroleum
products, gases, steam etc.,
Easy~Fit
Diversi-Gum is a non-hardening,
non-corrosive sealing compound that
is immediately paintable and has a
temperature usage range between
-4°C and 49°C. It is ideal for sealing
openings through foundations or
refrigeration pipe entries.
Silicone Sealants
Available in clear or white,
DiversiTech Silicone sealants are
100% food grade and can be used
in applications for continuous use up
to 232°C. It is UV and water resistant
and has long term flexibility.
Part Code
Description
Pack Quantity
Quantity
CLL-1
Pro Tite (39ml) Squeeze Tube
12
1
01714
Foam Sealant (355ml)
12
1
01724
Foam Sealant (591ml)
12
1
6-202-1
DiversiGum (0.5kg) Slug
24
1
6-202-2
DiversiGum (1kg) Slug
20
1
7-4000
Clear Silicone Sealant (305ml)
12
1
7-4100
White Silicone Sealant (305ml)
12
1
Fixings
Flexi
Install +
Partners PH Family PH Motors Portable Service +
Squeezy
99
Line Seal Kits and Copper Spun Driers
Line Seal
Kits
Partners
Leaking system – Can’t reach, or even find the leak? No
problem with a DiversiTech Line Seal kit. Line Seal kits are
a fast and effective way to permanently seal system leaks
in refrigerant systems. Line Seal stops existing leaks and
remains in the system to prevent future leaks.
Features
Available in two sizes, Line Seal is compatible with all oils and
refrigerants and it will not contaminate the refrigerant. Line Seal uses
the systems refrigerant as a charge, requires no recovery or pump
down and meets ARI 700 purity standards.
• Butane and propane free – will not
contaminate refrigerant
• Stops existing leaks
• Prevents future leaks
• Fast, effective and permanent
• Compatible with all oils and
refrigerants
• Self-contained kit – everything is
in the box
Part Code
Description
Quantity
Suitable for Use on...
LS-1
Line Seal kit for systems up to 1.5 tons (5kW)
1
Sealing leaks in small systems up to 1.5 tons (5kW)
LS-2
Line Seal kit for systems from 1.5 tons to 5 tons (5kW to 17kW)
1
Sealing leaks in systems from 1.5 to 5 tons (5 to 17kW)
Universal
Copper Spun
Driers
Partners
Manufactured with the latest generation molecular sieves and compatible with many refrigerants
including R134a, our universal copper spun driers can be used in all hermetic and open
compressor refrigeration systems. This includes commercial and domestic refrigerators, freezers
and air conditioners up to 2.0 HP and driers are hermetically sealed with extended ends.
100
Part Code
Outlet
Inlet
Diameter
Length
Desiccant R12
Tonnage
Order Multiple
DX-3
1/4" (6mm)
1/4" (6mm)
3/4" (19mm)
7.11/16" (195mm)
10
1/2 (1.75kW)
1
DX-4
Multiple
1/4" (6mm)
1" (25mm)
9" (228mm)
18
1.1/2 (5kW)
1
DXA-5
1/4" (6mm)
1/4" (6mm)
1" (25mm)
9.1/4" (235mm)
20
1.1/2 (5kW)
1
www.pumph.co.uk 0115 900 5858
Refrigerant ID Labels
Partners
Refrigerant
ID Labels
Pump House offer a range of refrigerant and oil identification labels in packs of 10, including
R410a R407c and R404a. Please contact the Sales Office with your requirements.
Partners
E-Lite Plastic
Equipment
Pads
E-Lites rugged design provides uniform and generous ribbing for optimum ground support
without inserts. The result is a pad that is lightweight but not too light. A subtle texture
prevents unit slide and presents a classic appearance, which is enhanced by rounded
corners and a concrete grey colour side slip. Each E-Lite is moulded with a size label and a
symbol representing the amount of recycled material used.
Easy~Fit
Part Code
Size (inches)
Size (mm)
Pad Weight
EL2424-2
24" x 24" x 2"
600mm x 600mm x 51mm
2.5kg
EL2436-2
24" x 36" x 2"
600mm x 900mm x 51mm
5kg
EL3232-2
32" x 32" x 2"
800mm x 800mm x 51mm
4.5kg
Fixings
Flexi
Install +
Partners PH Family PH Motors Portable Service +
Squeezy
101
Line Taps
Partners
Line Taps
MAC – The Ultimate In
Line Piercing Valve
QTM-1
Line Tap and
Swivel Valves
DTL-4G
Quick-Tap
QT-2
Quick-Tap 2
QTH-2
102
Install valve – connect charging hose – service. That’s all there is to it with a
MAC line piercing valve. MAC valves feature a uniport single connection for
piercing and servicing. Sealed with refrigerant resistant 'O' rings, the needle
automatically back seats after servicing to leave the line free
of residue.
Part Code
Description
Pack Quantity
QTM-1
Line Piercing Valve – 6.35mm / 8mm and 9.5mm OD
1
QTM-2
Line Piercing Valve – 13mm / 16mm OD Tube
1
QTM-3
Line Piercing Valve – 4.75mm / 6.4 OD Tube
1
The quick, safe and easy option to charge, discharge and test a line. Simply
clamp on the DLT valve, attach the DCV-1G control valve and pierce the line.
The valve can swivel to any position and can also be removed and re-used.
Available in four sizes from 4.8mm OD tube size to 9.5mm.
Part Code
Description
Pack Quantity
DLT-3G
Line Tap Valve – 4.75mm OD Tube
1
DLT-4G
Line Tap Valve – 6.35mm OD Tube
1
DLT-5G
Line Tap Valve – 8mm OD Tube
1
DLT-6G
Line Tap Valve – 9.5mm OD Tube
1
DCV-1G
Valve for DLT Line Taps
1
Features a valve core in the 1/4" male port. Simply pierce the line and back
seat the needle. The flow will start when the depressor type charging hose
is connected.
Part Code
Description
Pack Quantity
QT-1
Quick Tap – 6.4mm / 8mm / 9.5mm OD Tube
1
QT-2
Quick Tap – 13mm / 16mm OD Tube
1
Identical to the quick tap except that a nylon handle replaces the hex wrench
and Phillips head screws are used.
Part Code
Description
Pack Quantity
QTH-1
Quick Tap 2 – 6.4mm / 8mm / 9.5mm OD Tube
1
QTH-2
Quick Tap 2– 13mm / 16mm OD Tube
1
www.pumph.co.uk 0115 900 5858
Line Taps
Insta-Tap Refrigeration
Recovery Tool
QT-100
Core Storer
RC-1 Insta-Charge
Fixings
Flexi
Part Code
Description
Pack Quantity
QT-100
Quick Tap 2 – 6.35mm / 8mm and 9.5mm OD
Tube Size
1
QT-100N
Replacement Hardened Steel Needle and Gasket
1
QT-100G
Replacement Gasket Only
3
All steel valve core remover and storage container. Completely knurled
for easier grip eliminating slippage when used with oily or greasy hands.
The core storer features a compartment for storing extra valve cores. Four
replacement cores are included with each tool.
Core Removal Tool
Easy~Fit
The fastest, easiest way to evacuate refrigerant before disposal of a unit.
Quick-release tool that snaps onto the refrigerant line for full and immediate
flow. Punctures a large hole for maximum flow recovery unit. One tool fits all
sizes from 4.76mm to 22.2mm OD hard tubing.
Install +
Part Code
Description
Pack Quantity
VCR-1
Core Removal and Storer
1
Save time and money with this easy-to-use core removal tool. The VCRT-1
is designed to remove and replace leaking valve cores without losing the
refrigerant charge. Also allows for quicker recovery and recharging systems
by removing the restriction of the valve core. Connects to any 1/4" male
flare fitting.
Part Code
Description
Pack Quantity
VCRT-1
Core Removal Tool
1
The perfect tool for charging liquid refrigerant into a system through the low
side without damaging the compressor. The Insta-Charge converts liquid
refrigerant to a saturated vapour for fast entry and eliminates the need to heat
the cylinder. Also makes the adding of tracer dyes easy.
Part Code
Description
Pack Quantity
RC-1
Insta-Charge
1
Partners PH Family PH Motors Portable Service +
Squeezy
103
Tape, Cloths and Mats
Cork Insulation Tape
Adheres firmly to all metals and is used on hot or cold pipes
to prevent heat loss and condensation drips.
Part Code
Description
Pack
Quantity
Suitable for Use on...
6-330
Cork Insulation Tape – Black
1/8" x 2" x 30' Roll
1
Insulation of hot and cold pipes to
prevent condensation
Foam Insulation Tape
A superior self-adhesive foam tape that can be used on hot
or cold pipes to prevent heat loss and condensation drips.
Easily cut and moulded, it fits well around valves and fittings.
Part Code
Description
Pack
Quantity
Suitable for Use on...
6-9718
Foam Insulation Tape – Black
1/8" x 2" x 30' Roll
1
Insulation of hot and cold pipes,
valves and fittings to prevent
condensation
Aluminium Foil Tape
An easy-to-handle aluminium tape that prevents heating and
cooling losses and blocks odours and moisture. Has a 3 to
5 year shelf life and a working temperature range of -35°F to
260°F (-37°C to 127°C).
Part Code
Description
Pack
Quantity
Suitable for Use on...
640-AF-2
Aluminium Foil Tape –
2" x 50 Yards
1
Heating and Cooling systems to
prevent heat losses on HVAC and
refrigeration systems
Abrasive Cloth
A high quality aluminium oxide 120 grit abrasive cloth that
can be used wet or dry to thoroughly clean steel and
copper tubing.
104
Part Code
Description
Pack
Quantity
Suitable for Use on...
SC-10
Abrasive Cloth – 120 Grit –
1.1/2" x 10 Yards
1
Cleaning copper and steel tubing
www.pumph.co.uk 0115 900 5858
Tape, Cloths and Mats
Grip-Cut Cloth
A 180 grit open mesh sand screen cloth with aluminium
oxide bonding that is 100% waterproof. Can be used by
hand or with portable tools and is most effective where
clogging would be a problem such as soft materials.
Part Code
Description
Pack
Quantity
Suitable for Use on...
SCM-5
Grit-Cut Open Mesh Sand Screen
Cloth – 1.1/2" x 5 Yards
1
Dry or wet sanding of pipework and
other components
WypAll Plus Cloths
A heavy duty towel that absorbs grease, oil, water and
solvents from floors, hands, parts, tools and machinery.
Comes in a convenient pop-up box of 100 towels.
Part Code
Description
Pack
Quantity
Suitable for Use on...
5-05790
WypAll Plus Clean Up Towels –
White – Box of 100
1
Cleaning of floors, hands, parts, tools
and machinery etc.
Braze Barrier Mats
Designed to withstand temperatures up to 3000°F
(1600°C), Braze Barrier mats will protect walls, floors,
pipework, equipment, components and adjacent surfaces
from torch flames when soldering, welding and brazing.
Containing no asbestos, the mats have taped and sewn edges with a
grommet at each corner and are resistant to many chemicals and acids. The
16500 is 18" square, plain and the 16510 is 18" square and has a keyhole
cut-out for draping over pipework etc.,
Easy~Fit
Fixings
Flexi
Install +
Part Code
Description
Pack
Quantity
Suitable for Use on...
16500
Plain Braze Barrier Mat – 18" x 18"
1
Prevent heat damage when brazing,
welding and soldering
16510
Keyhole Braze Barrier Mat –
18" x 18"
1
Prevent heat damage when brazing,
welding and soldering
Partners PH Family PH Motors Portable Service +
Squeezy
105
Fixings
Meet the Team...
Jon Boycott
Product Manager
Tom Fitzsimons
Sales and Product
Manager
Ryan Foote
Sales
Representative
Jodie Watson
Sales
Representative
Section 4
Channel and Channel Accessories
Cable and Basket Tray
Fasteners – Washers
Fasteners – Nuts
Fasteners – Screws Fasteners – Anchor Bolts
Fasteners – Plus
106
106
108-109
110-111
112
113-114
115-116
117
118
www.pumph.co.uk 0115 900 5858
Fixings
NEW & EXCLUSIVE
Fixings
Fixings
Channel and
Channel Accessories
Cable and
Basket Tray
Channel is a support system manufactured in steel. It is
designed to aid the installation and support of many items
including electrical cables, air conditioning units, ductwork
and more.
Cable and basket tray is widely used throughout many
installations of all kinds of equipment. This can be heating and
ventilation, air conditioning or electrical. It is also widely used
to support cables, pipes and trays.
Page 108-109
Page 110-111
107
107
Channel and Channel Accessories
Channel and
Channel Accessories
Fixings
Channel and its range of accessories make up a support system which is designed to aid
the installation and supports of many items including air conditioning, ductwork, electrical
cables, drains and more.
Channel Slotted Strut
Beam G Clamp
Channel Base
Plate Two Way
Channel Internal
Angle 45 Degree
Part Code
Description
X-CH4121-1.5-3M
Channel 41mm x 21mm x 1.5mm x 3 metres
X-CH4121-2.5-3M
Channel 41mm x 21mm x 2.5mm x 3 metres
X-CH4141-1.5-3M
Channel 41mm x 41mm x 1.5mm x 3 metres
X-CH4141-2.5-3M
Channel 41mm x 41mm x 2.5mm x 3 metres
Part Code
Description
X-BGC-M6
Beam G Clamp – M6
X-BGC-M8
Beam G Clamp – M8
X-BGC-M10
Beam G Clamp – M10
X-BGC-M12
Beam G Clamp – M12
Part Code
Description
X-BP810
Back Plate M8 /M10
X-CB90-1H1H
90 Degree Bracket – 1 Hole / 1 Hole
X-CB90-1H2H
90 Degree Bracket – 1 Hole / 2 Hole
X-CB90-2H2H
90 Degree Bracket – 2 Hole / 2 Hole
X-CBC-1
Channel Beam Clamp – Type 1
X-CBC-2
Channel Beam Clamp – Type 2
X-CBC-3
Channel Beam Clamp – Type 3
X-CBC-4
Channel Beam Clamp – Type 4
X-CBC-5
Channel Beam Clamp – Type 5
X-CBC-6
Channel Beam Clamp – Type 6
X-CBU-4141
Channel U Bracket – 41mm x 41mm
X-CH-4-IS
Channel 4 Way Intersection
X-CH-A
Channel Offset – 45 Degree
X-CHBC-3M
Channel Black Capping x 3 metres
X-CHBP1W-4141
Channel Base Plate One Way – 41mm x 41mm
X-CHBP2W-4141
Channel Base Plate Two Way – 41mm x 41mm
X-CH-IA-45
Channel Internal Angle 45 Degree
X-CH-IA-45135
Channel Internal Angle 45 Degree 135
X-CHWF-1
Channel Wing Fitting – Type 1
X-CHWF-2
Channel Wing Fitting – Type 2
X-CHWF-3
Channel Wing Fitting – Type 3
Continued...
108
www.pumph.co.uk 0115 900 5858
Channel and Channel Accessories
Window
Bracket
Flat Plate –
4 Hole
T Bracket –
4 Hole
Plastic End
Caps
Easy~Fit
Fixings
Flexi
Install +
Part Code
Description
X-CHWF-4
Channel Wing Fitting – Type 4
X-CHZB-4121
Channel Z Bracket – 41mm x 21mm
X-CHZB-4141
Channel Z Bracket – 41mm x 41mm
X-CWB-4121
Window Bracket 41mm x 21mm
X-CWB-4141
Window Bracket 41mm x 41mm
X-FP2H
Flat Plate – 2 Hole
X-FP3H
Flat Plate – 3 Hole
X-FP4H
Flat Plate – 4 Hole
X-FP5H
Flat Plate – 5 Hole
X-PC
Purling Clip – 100pk – Z10 Beam Clamp
X-TBR4H
T Bracket – 4 Hole
X-CHCB-4121
Plastic End Caps – 41mm x 21mm Black – Box of 100
X-CHCB-4141
Plastic End Caps – 41mm x 41mm Black – Box of 100
X-CHCW-4121
Plastic End Caps – 41mm x 21mm White – Box of 100
X-CHCW-4141
Plastic End Caps – 41mm x 41mm White – Box of 100
X-CBCB-4121-B6
Plastic End Caps – 41mm x 21mm Black – Bag of 6
X-CHCB-4141-B6
Plastic End Caps – 41mm x 41mm Black – Bag of 6
X-CHCW-4121-B6
Plastic End Caps – 41mm x 21mm White – Bag of 6
X-CHCW-4141-B6
Plastic End Caps – 41mm x 41mm White– Bag of 6
X-CEC4H-4121
Channel 4 Hole External 41mm x 21mm Connector
X-CEC4H-4141
Channel 4 Hole External 41mm x 41mm Connector
X-CIC4H-4121
Channel 4 Hole Internal 41mm x 21mm Connector
X-CIC4H-4141
Channel 4 Hole Internal 41mm x 41mm Connector
Partners PH Family PH Motors Portable Service +
Squeezy
109
Cable and Basket Tray
Fixings
Cable and Basket Tray
Cable and basket tray is widely used in many installations of all kinds of equipment. This
may be heating and vent, air conditioning and electrical. It can be used to support cables,
pipes and drains.
Cable Tray
Cable Tray Flat Bends
45 Degree
Cable Tray Tees
Cable Tray Intersection
110
Part Code
Description
X-CTMD-PG-75-3M
Cable Tray Medium Duty – 75mm Pre-Galv. x 3 metres
X-CTMD-PG-100-3M
Cable Tray Medium Duty – 100mm Pre-Galv. x 3 metres
X-CTMD-PG-150-3M
Cable Tray Medium Duty – 150mm Pre-Galv. x 3 metres
X-CTMD-PG-225-3M
Cable Tray Medium Duty – 225mm Pre-Galv. x 3 metres
X-CTMD-PG-300-3M
Cable Tray Medium Duty – 300mm Pre-Galv. x 3 metres
X-CTMD-PG-450-3M
Cable Tray Medium Duty – 450mm Pre-Galv. x 3 metres
X-CTMD-PG-600-3M
Cable Tray Medium Duty – 600mm Pre-Galv. x 3 metres
Part Code
Description
X-CTMD-B-75
Cable Tray Flat Bend – 75mm 90 Degree
X-CTMD-B-100
Cable Tray Flat Bend – 100mm 90 Degree
X-CTMD-B-150
Cable Tray Flat Bend – 150mm 90 Degree
X-CTMD-B-225
Cable Tray Flat Bend – 225mm 90 Degree
X-CTMD-B-300
Cable Tray Flat Bend – 300mm 90 Degree
X-CTMD-B-450
Cable Tray Flat Bend – 450mm 90 Degree
X-CTMD-FB-75
Cable Tray Flat Bend – 75mm 45 Degree
X-CTMD-FB-100
Cable Tray Flat Bend – 100mm 45 Degree
X-CTMD-FB-150
Cable Tray Flat Bend – 150mm 45 Degree
X-CTMD-FB-225
Cable Tray Flat Bend – 225mm 45 Degree
X-CTMD-FB-300
Cable Tray Flat Bend – 300mm 45 Degree
X-CTMD-FB-450
Cable Tray Flat Bend – 450mm 45 Degree
Part Code
Description
X-CTMD-TP-75
Cable Tray Tee – 75mm
X-CTMD-TP-100
Cable Tray Tee – 100mm
X-CTMD-TP-150
Cable Tray Tee – 150mm
X-CTMD-TP-225
Cable Tray Tee – 225mm
X-CTMD-TP-300
Cable Tray Tee – 300mm
X-CTMD-TP-450
Cable Tray Tee – 450mm
Part Code
Description
X-CTMD-IS-75
Cable Tray Intersection – 75mm
X-CTMD-IS-100
Cable Tray Intersection – 100mm
X-CTMD-IS-150
Cable Tray Intersection – 150mm
X-CTMD-IS-225
Cable Tray Intersection – 225mm
X-CTMD-IS-300
Cable Tray Intersection – 300mm
X-CTMD-IS-450
Cable Tray Intersection – 450mm
www.pumph.co.uk 0115 900 5858
Cable and Basket Tray
Cable Tray Hanger
Cable Tray Stand Off
Bracket
Basket Tray
Basket Tray Accessories
Central Support Hanger
Part Code
Description
X-CTCMD-PG
Tray Coupler – Medium Duty Pre-Galv. – Pair
X-CTH-PG-50
Cable Tray Hanger – Pre-Galv. – 50mm
X-CTH-PG-75
Cable Tray Hanger – Pre-Galv. – 75mm
X-CTH-PG-100
Cable Tray Hanger – Pre-Galv. – 100mm
X-CTH-PG-150
Cable Tray Hanger – Pre-Galv. – 150mm
X-CTH-PG-225
Cable Tray Hanger – Pre-Galv. – 225mm
X-CTH-PG-300
Cable Tray Hanger – Pre-Galv. – 300mm
Part Code
Description
X-CTMD-SOB-100
Cable Tray Stand Off Bracket – Medium Duty – 100mm
X-CTMD-SOB-150
Cable Tray Stand Off Bracket – Medium Duty – 150mm
X-CTMD-SOB-225
Cable Tray Stand Off Bracket – Medium Duty – 225mm
X-CTMD-SOB-300
Cable Tray Stand Off Bracket – Medium Duty – 300mm
X-CTMD-SOB-450
Cable Tray Stand Off Bracket – Medium Duty – 450mm
Part Code
Description
X-BT-60
Basket Tray 60mm x 60mm x 3mm
X-BT-100
Basket Tray 100mm x 60mm x 3mm
X-BT-150
Basket Tray 150mm x 60mm x 3mm
X-BT-200
Basket Tray 200mm x 60mm x 3mm
X-BT-300
Basket Tray 300mm x 60mm x 3mm
X-BT-450
Basket Tray 450mm x 60mm x 3mm
Part Code
Description
X-BTC
Basket Tray Coupler – Pair
X-BT-CH
Basket Tray – Central Support Hanger – Pair
X-BT-HDC
Basket Tray – Hold Down Clamp
X-BTJ
Basket Tray – Joint Kit – 4-Part Kit
X-BT-SH
Basket Tray – Suspension Hanger
Cable Tray are also available in light, heavy and hot dipped
galvanised versions.
Coupler
Suspension Hanger
Easy~Fit
Fixings
Flexi
Install +
Partners PH Family PH Motors Portable Service +
Squeezy
111
Fasteners – Washers
Fixings
Fasteners – Washers
Penny Washers
Flat/Form A Washers
Shake Proof Washers
Square Plate Washers
112
Part Code
Description
X-WA6-25-B25
Penny Washer M6 x 25mm – Bag of 25
X-WA6-25-B100
Penny Washer M6 x 25mm – Box of 100
X-WA8-25-B25
Penny Washer M8 x 25mm – Bag of 25
X-WA8-25-B100
Penny Washer M8 x 25mm – Box of 100
X-WA10-25-B25
Penny Washer M10 x 25mm – Bag of 25
X-WA10-25-B100
Penny Washer M10 x 25mm – Box of 100
X-WA6-40-B100
Penny Washer M6 x 40mm – Box of 100
X-WA8-40-B100
Penny Washer M8 x 40mm – Box of 100
X-WA10-40-B100
Penny Washer M10 x 40mm – Box of 100
X-WA12-40-B100
Penny Washer M12 x 40mm – Box of 100
Part Code
Description
X-WA-M6-B100
Flat / Form A Washer M6 – Box of 100
X-WA-M8-B100
Flat / Form A Washer M8 – Box of 100
X-WA-M10-B100
Flat / Form A Washer M10 – Box of 100
X-WA-M12-B100
Flat / Form A Washer M12 – Box of 100
Part Code
Description
X-SPW-M6-B100
Shake Proof Washer M6 – Box of 100
X-SPW-M8-B100
Shake Proof Washer M8 – Box of 100
X-SPW-M10-B100
Shake Proof Washer M10 – Box of 100
X-SPW-M12-B100
Shake Proof Washer M12 – Box of 100
Part Code
Description
X-SQPW-M6-B6
Square Plate Washer – M6 – Bag of 6
X-SQPW-M6-B100
Square Plate Washer – M6 – Box of 100
X-SQPW-M8-B6
Square Plate Washer – M8 – Bag of 6
X-SQPW-M8-B100
Square Plate Washer – M8 – Box of 100
X-SQPW-M10-B6
Square Plate Washer – M10 – Bag of 6
X-SQPW-M10-B100
Square Plate Washer – M10 – Box of 100
X-SQPW-M12-B6
Square Plate Washer – M12 – Bag of 6
X-SQPW-M12-B100
Square Plate Washer – M12 – Box of 100
www.pumph.co.uk 0115 900 5858
Fasteners – Nuts
Fixings
Fasteners – Nuts
Channel Nuts
Long Spring
Channel Nut Plain
Hexagonal Nuts
Easy~Fit
Fixings
Flexi
Install +
Part Code
Description
X-CNLS-M6-B6
Channel Nut Long Spring M6 – Bag of 6
X-CNLS-M6-B100
Channel Nut Long Spring M6 – Box of 100
X-CNLS-M8-B6
Channel Nut Long Spring M8 – Bag of 6
X-CNLS-M8-B100
Channel Nut Long Spring M8 – Box of 100
X-CNLS-M10-B6
Channel Nut Long Spring M10 – Bag of 6
X-CNLS-M10-B100
Channel Nut Long Spring M10 – Box of 100
X-CNLS-M12-B6
Channel Nut Long Spring M12 – Bag of 6
X-CNLS-M12-B100
Channel Nut Long Spring M12 – Box of 100
Part Code
Description
X-CN-M6-B8
Channel Nut Plain M6 – Bag of 8
X-CN-M6-B100
Channel Nut Plain M6 – Box of 100
X-CN-M8-B8
Channel Nut Plain M8 – Bag of 8
X-CN-M8-B100
Channel Nut Plain M8 – Box of 100
X-CN-M10-B8
Channel Nut Plain M10 – Bag of 8
X-CN-M10-B100
Channel Nut Plain M10 – Box of 100
X-CN-M12-B8
Channel Nut Plain M12 – Bag of 8
X-CN-M12-B100
Channel Nut Plain M12 – Box of 100
Part Code
Description
X-HN-M6-B25
Hex Nut M6 – Bag of 25
X-HN-M6-B200
Hex Nut M6 – Box of 200
X-HN-M8-B25
Hex Nut M8 – Bag of 25
X-HN-M8-B200
Hex Nut M8 – Box of 200
X-HN-M10-B25
Hex Nut M10 – Bag of 25
X-HN-M10-B200
Hex Nut M10 – Box of 200
X-HN-M12-B25
Hex Nut M12 – Bag of 25
X-HN-M12-B200
Hex Nut M12 – Box of 200
X-HNC-M8-B10
Hex Nut Cover M8 – Bag of 10
X-HNC-M10-B10
Hex Nut Cover M10 – Bag of 10
Partners PH Family PH Motors Portable Service +
Squeezy
113
Fasteners – Nuts
Fixings
Fasteners
–
Nuts
...continued
Wedge Nuts
Roofing Nuts and Bolts
Stud Connectors
114
Part Code
Description
X-WN-M6-B100
Wedge Nut M6 – Box of 100
X-WN-M8-B100
Wedge Nut M8 – Box of 100
X-WN-M10-B100
Wedge Nut M10 – Box of 100
Part Code
Description
X-RBN-M6-12-B20
Roofing Bolt and Nut – M6 x 12mm – Bag of 20
X-RBN-M6-12-B100
Roofing Bolt and Nut – M6 x 12mm – Box of 100
X-RBN-M6-16-B20
Roofing Bolt and Nut – M6 x 16mm – Bag of 20
X-RBN-M6-16-B100
Roofing Bolt and Nut – M6 x 16mm – Box of 100
X-RBN-M6-20-B20
Roofing Bolt and Nut – M6 x 20mm – Bag of 20
X-RBN-M6-20-B100
Roofing Bolt and Nut – M6 x 20mm – Box of 100
X-RBN-M6-30-B20
Roofing Bolt and Nut – M6 x 30mm – Bag of 20
X-RBN-M6-30-B100
Roofing Bolt and Nut – M6 x 30mm – Box of 100
Part Code
Description
X-SCON-M8-B4
Stud Connector – M8 – Bag of 4
X-SCON-M8
Stud Connector – M8 – Box of 100
X-SCON-M10-B4
Stud Connector – M10 – Bag of 4
X-SCON-M10
Stud Connector – M10 – Box of 100
www.pumph.co.uk 0115 900 5858
Fasteners – Screws
Fixings
Fasteners – Screws
Threaded Rod
Studding Caps
Set Screws
Easy~Fit
Fixings
Flexi
Install +
Part Code
Description
X-TR-M8-3M
Threaded Rod – M8 x 3 metres
X-TR-M10-3M
Threaded Rod – M10 x 3 metres
X-TR-M12-3M
Threaded Rod – M12 x 3 metres
X-TR-M6-3M
Threaded Rod – M6 x 3 metres
Part Code
Description
X-SCA-M6-B30
Studding Cap – M6 – Bag of 30
X-SCA-M6
Studding Cap – M6 – Box of 100
X-SCA-M8-B30
Studding Cap – M8 – Bag of 30
X-SCA-M8
Studding Cap – M8 – Box of 100
X-SCA-M10-B30
Studding Cap – M10 – Bag of 30
X-SCA-M10
Studding Cap – M10 – Box of 100
X-SCA-M12-B30
Studding Cap – M12 – Bag of 30
X-SCA-M12
Studding Cap – M12 – Box of 100
Part Code
Description
X-SS6-30-B10
Set Screw / Hex Set – M6 x 30mm – Bag of 10
X-SS6-30-B100
Set Screw / Hex Set – M6 x 30mm – Box of 100
X-SS8-30-B10
Set Screw / Hex Set – M8 x 30mm – Bag of 10
X-SS8-30-B100
Set Screw / Hex Set – M8 x 30mm – Box of 100
X-SS8-50-B10
Set Screw / Hex Set – M8 x 50mm – Bag of 10
X-SS8-50-B100
Set Screw / Hex Set – M8 x 50mm– Box of 100
X-SS10-30-B10
Set Screw / Hex Set – M10 x 30mm – Bag of 10
X-SS10-30-B100
Set Screw / Hex Set – M10 x 30mm – Box of 100
X-SS10-50-B10
Set Screw / Hex Set – M10 x 50mm – Bag of 10
X-SS10-50-B100
Set Screw / Hex Set – M10 x 50mm – Box of 100
X-SS12-25-B10
Set Screw / Hex Set – M12 x 25mm – Bag of 10
X-SS12-25-B100
Set Screw / Hex Set – M12 x 25mm – Box of 100
X-SS12-30-B10
Set Screw / Hex Set – M12 x 30mm – Bag of 10
X-SS12-30-B100
Set Screw / Hex Set – M12 x 30mm – Box of 100
Partners PH Family PH Motors Portable Service +
Squeezy
115
Fasteners – Screws
Fixings
Fasteners
–
Screws
...continued
Coach Screws
Teks Screws
Twin Fast Screw
116
Part Code
Description
X-CS-M830-B5
Coach Screw / Hex – M8 x 30mm – Bag of 5
X-CS-M830-B100
Coach Screw / Hex – M8 x 30mm – Box of 100
X-CS-M850-B5
Coach Screw / Hex – M8 x 50mm – Bag of 5
X-CS-M850-B100
Coach Screw / Hex – M8 x 50mm – Box of 100
X-CS-M1030-B5
Coach Screw / Hex – M10 x 30mm – Bag of 5
X-CS-M1030-B100
Coach Screw / Hex – M10 x 30mm – Box of 100
X-CS-M1050-B5
Coach Screw / Hex – M10 x 50mm – Bag of 5
X-CS-M1050-B100
Coach Screw / Hex – M10 x 50mm – Box of 100
Part Code
Description
X-PBS-15MM
Plasterboard Screw 15mm – Box of 100
X-TEK5.5-25-B100
TEKS Screw 5.5 x 25mm – Box of 100
X-TEK5.5-38-B100
TEKS Screw 5.5 x 38mm – Box of 100
X-TF8-1
Twin Fast Screw 8 – 1"
X-TF8-1-1/2
Twin Fast Screw 8 – 1-1/2"
X-TF8-2
Twin Fast Screw 8 – 2"
X-TF10-1
Twin Fast Screw 10 – 1"
X-TF10-1-1/2
Twin Fast Screw 10 – 1-1/2"
X-TF10-2
Twin Fast Screw 8 – 2"
X-TF10-2-1/2
Twin Fast Screw 8 – 2-1/2"
www.pumph.co.uk 0115 900 5858
Fasteners – Anchor Bolts
Fixings
Fasteners – Anchor Bolts
Anchor Bolt
Part Code
Drop In Anchor
Drop In Anchor Lipped
Loose Bolt Shield
Anchor
Eye Bolts
Socket Bolts
Easy~Fit
Fixings
Flexi
Install +
Description
X-AB-M10-B4
Anchor Bolt – M10 – Bag of 4
X-AB-M10-B100
Anchor Bolt – M10 – Box of 100
Part Code
Description
X-DIA-M8-B10
Drop In Anchor – M8 – Bag of 10
X-DIA-M8-B100
Drop In Anchor – M8 – Box of 100
X-DIA-M10-B10
Drop In Anchor – M10 – Bag of 10
X-DIA-M10-B50
Drop In Anchor – M10 – Box of 50
Part Code
Description
X-DIAL-M8-B100
Drop In Anchor – Lipped M8 – Box of 100
X-DIAL-M10-B50
Drop In Anchor – Lipped M10 – Box of 50
X-DIA-ST
Drop In Anchor – Setting Tool
Part Code
Description
X-LBSA-0810L
Loose Bolt Shield Anchor – 0810L – Box of 50
X-LBSA-1025L
Loose Bolt Shield Anchor – 1025L – Box of 50
Part Code
Description
X-EB-M8-B25
Eye Bolt – M8 x 80mm – Box of 25
X-EB-M10-B10
Eye Bolt – M10 x 80mm – Box of 10
Part Code
Description
X-SB810-B4
Socket Bolts M8-M10 – Bag of 4
X-SB810-B100
Socket Bolts M8-M10 – Box of 100
Partners PH Family PH Motors Portable Service +
Squeezy
117
Fasteners – Plus
Fixings
Fasteners – Plus
Fused Spur
Fused Spur with
Neon – Metal Clad
Fused Spur with
Neon – Plastic
PVC Pipes
PVC-U – Elbow
3/4" 90 Degree
PVC-U – Elbow
3/4" Maclaw Clip
PVC-U – 3/4"
T Piece
Part Code
Description
X-FSBBMC
Fused Spur with Back Box – Metal Clad
X-FSNBBMC
Fused Spur with Back Box and Neon – Metal Clad
X-FSNBBSM-25
Fused Spur with Back Box and Neon – 25mm Plastic Back Box
X-FSNBBSM-32
Fused Spur with Back Box and Neon – 32mm Plastic Back Box
Part Code
Description
X-PVCU-3/4E-45
PVC-U – Elbow 3/4" 45 Degree
X-PVCU-3/4E-90
PVC-U – Elbow 3/4" 90 Degree
X-PVCU-3/4-MAC
PVC-U – 3/4" Maclow Clips
X-PVCU-3/4P-3M
PVC-U – Pipe 3/4" 3m Length
X-PVCU-3/4-R
PVC-U – Reducer 1" – 3/4"
X-PVCU-3/4-SOC
PVC-U – 3/4" Socket
X-PVCU-3/4-TP
PVC-U – 3/4" T Piece
X-PVCU-SOBSC-110MM
PVC U – Strap-on BOSS 110mm Side Fastening (Inc. Rubber Bung)
Other sizes are available on request.
Solvent Cement
Wall Plugs
118
Part Code
Description
X-SOLCEM
Solvent Cement – 250ml
Part Code
Description
X-WPR-5MM
Wall Plug – 5mm – Red
X-WPB-7MM
Wall Plug – 7mm – Brown
www.pumph.co.uk 0115 900 5858
Engineer
on call
TEL:
2016/2017
Pump House, Glaisdale Drive East, Nottingham NG8 4LY
www.pumph.co.uk
0115 900 5858
[email protected]
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement