Capresso | IMPRESSA C5 | Technical data | Capresso IMPRESSA C5 Technical data

Capresso IMPRESSA C5 Technical data
The IMPRESSA C5 Manual
The ‘IMPRESSA C5 Manual’ has been awarded the seal of
approval by the independent German Technical Inspection
Agency, TÜV SÜD, due to its easy-to-understand style, its
thoroughness and coverage of safety aspects.
Table of contents
Your IMPRESSA C5
Control elements and accessories
4
Proper use
6
For your safety
6
The IMPRESSA C5 Manual
8
Symbol description ......................................................................................................................................8
1 IMPRESSA C5 – Click & Drink
9
Coffee that fulfils your wildest dreams ....................................................................................................9
Click & Drink..................................................................................................................................................9
JURA on the Internet .................................................................................................................................. 10
Knowledge Builder ..................................................................................................................................... 10
2 Preparing and using your IMPRESSA for the first time
11
Setting up ..................................................................................................................................................... 11
Filling the water tank .................................................................................................................................. 11
Filling the bean container .......................................................................................................................... 11
First-time use .............................................................................................................................................. 12
Using and activating filter ........................................................................................................................13
Assessing and setting water hardness ................................................................................................... 15
Adjusting grinder ....................................................................................................................................... 16
Switching on ................................................................................................................................................17
Switching off ................................................................................................................................................17
3 Familiarising yourself with the control options
18
Preparing drinks at the touch of a button ............................................................................................. 18
One-off setting during drink preparation .............................................................................................. 19
Adjusting the permanent cup size settings.......................................................................................... 20
4 Preparing drinks at the touch of a button
21
Espresso and coffee ................................................................................................................................... 21
Cappuccino.................................................................................................................................................. 21
Pre-ground coffee ......................................................................................................................................22
Milk foam.................................................................................................................................................... 24
Hot water .................................................................................................................................................... 24
5 Adjusting the permanent settings in programming mode
26
Automatic switch-off ................................................................................................................................ 26
6 Maintenance
27
Maintenance tips ........................................................................................................................................27
Rinsing the machine ..................................................................................................................................27
Changing the filter .................................................................................................................................... 28
2
Table of contents
Cleaning the machine ............................................................................................................................. 29
Descaling the machine ............................................................................................................................. 31
Rinsing the Easy Cappuccino Frother ....................................................................................................33
Cleaning the Easy Cappuccino Frother ................................................................................................. 34
Descaling the water tank ..........................................................................................................................35
7 Messages in the maintenance field and symbol display
36
8 Troubleshooting
38
9 Transport and environmentally neutral disposal
39
Empty system ............................................................................................................................................ 39
Transport..................................................................................................................................................... 39
Disposal....................................................................................................................................................... 39
10 Technical data
40
Index
41
JURA contact details / Legal information
44
3
Control elements and accessories
Control elements and accessories
Mains cable
(see rear side)
de)
On/Off button
Switch for setting
fineness of grind
1
2
17
16
3
15
14
13
4
12
11
5
10
6
9
7
8
4
Figure: IMPRESSA C5 platinum
1
Filler funnel for pre-ground coffee
9
Drip tray
2
Cup tray
10
Cup platform
3
Water tank with level indicator
11
JURA Cappuccino Cleaner
4
Overview of maintenance indicators
12
Drawer with coffee grounds container
5
CLARIS filter cartridge
13
Height-adjustable coffee spout
6
Hot water nozzle
14
Easy Cappuccino Frother with milk pipe
7
Measuring spoon for pre-ground coffee
15
Connector System© for removable nozzles
8
JURA cleaning tablets
16
Switch for hot water and milk preparation
17
Bean container, aroma preservation cover
Control elements and accessories
1
2
3
4
5
6
7
8
Symbol display
Maintenance field
1
Symbol display
5
Maintenance indicator
2
Rotary Switch
6
Access door
3
Light segments
7
Maintenance field
4
Symbols
8
Indicators
a
s
d
f
P
h
j
k
1 Espresso
2 Espressos
1 coffee
2 coffees
P (Programming)
Maintenance
y
x
c
v
b
n
Water tank
Coffee grounds container
Bean container
Cleaning button
Descaling button
Filter button
Pre-ground coffee
Steam
5
Important information
Proper use
The machine has been designed and built for domestic use. It should
only be used to prepare coffee and to heat milk and water. Use for
any other purpose will be deemed improper. JURA Elektroapparate AG cannot accept any responsibility for the consequences of
improper use.
Before using the machine always carefully read and comply with all
these instructions. Keep this manual close to the IMPRESSA and, if
appropriate, pass it on to the next user.
For your safety
Please read and note carefully the following important safety information.
By doing this, you can avoid the life-threatening danger of electric
shock:
Never use a machine which has been damaged or with a
defective power cable.
For information on what to do in case of damage, for example
if there is a smell of burning, unplug the machine immediately
from the mains supply and contact the JURA service centre.
If the power cable for this machine is damaged, it must be
repaired either directly by JURA or by a JURA approved service
centre.
Make sure that the IMPRESSA and the power cable are not
located close to hot surfaces.
Be careful to ensure that the power cable does not get caught
and does not rub against sharp edges.
Never open and repair the machine yourself. Do not modify
the machine in any way that is not described in the IMPRESSA
Manual. The machine contains live parts. If opened, there is a
danger of serious injury. Repairs may only be carried out by
JURA approved service centres, using original spare parts and
accessories.
p
p
p
p
p
p
There is a risk of scalds or burns on the spouts or on the nozzle:
Place the machine out of the reach of children.
Do not touch any hot parts. Use the handles provided.
Be careful to ensure that the appropriate nozzle is installed
and clean. The nozzle or parts of the nozzle might come off if
the parts are not assembled correctly or a blockage occurs.
p
p
p
6
Important information
A defective machine is not safe and could cause injury or fire. To
avoid damage and any associated risk of injury or fire:
Never allow the power cable to loosely hang down. The power
cable can be tripped over or damaged.
Protect your IMPRESSA from environmental influences such
as rain, frost and direct sunlight.
Do not put the IMPRESSA, cable or connections in water.
Do not put the IMPRESSA or any individual parts in the dishwasher.
Switch your IMPRESSA off before cleaning it. Always wipe your
IMPRESSA with a damp cloth rather than a wet one, and protect it from prolonged water splash.
Only connect the machine to a power supply in accordance
with the information on the rating plate. The rating plate is
located on the underside of your IMPRESSA. Further technical
data is given in Chapter 10 ‘Technical Data’.
Use only original JURA care products. Use of accessories that
are not explicitly recommended by JURA could damage the
IMPRESSA.
Do not use any coffee beans treated with additives or caramelised coffee beans.
Always fill the water tank with cold, fresh mains water.
If you are absent for a prolonged period of time, turn the
machine off.
p
p
p
p
p
p
p
p
p
p
People, including children, who
do not have the physical, sensory or mental capabilities to use
the machine safely or
are inexperienced or lack knowledge in how to use the
machine safely
must be supervised by a responsible person when using it, or must
be instructed in how to use it correctly.
p
p
Safe handling of the CLARIS filter cartridges:
Filter cartridges should be kept out of the reach of children.
Store them dry in the sealed package.
Protect them from heat and direct sunlight.
Do NOT use damaged filter cartridges.
Do NOT open filter cartridges.
p
p
p
p
p
7
The IMPRESSA C5 Manual
The IMPRESSA C5 Manual
You are holding the manual for your IMPRESSA C5 in your hand. The
information contained in this manual will help you to familiarise
yourself with your IMPRESSA safely and quickly and teach you the
full range of facilities it offers.
Chapter 2, ‘Preparing and using your IMPRESSA for the first time’,
explains step-by-step how to set up and prepare the IMPRESSA.
Chapter 3, ‘Familiarising yourself with the control options’ is important for you to read as you are familiarising yourself with your
IMPRESSA. It invites you to actively explore all the different coffee
experiences that it offers.
All the other chapters are intended to help you when you have a
specific query.
If you use the IMPRESSA C5 Manual, you will become a past master
at preparing exciting coffee specialities, you will be a Barista!
You can download the short operating instructions for your machine
from the JURA website (www.jura.com).
Symbol description
Warnings
CAUTION
CAUTION
Always take note of any information marked with the CAUTION or WARNING symbol. The signal word WARNING points out potential risk of serious injury, and the
signal word CAUTION potential risk of slight injury.
The CAUTION symbol is used to draw attention to circumstances which could cause
the machine to become damaged.
Symbols used
o
@
L
8
Information and tips to ease things for you as you use your IMPRESSA.
References to the online JURA website, where you can find interesting further information: www.jura.com
Prompt to take action. This symbol means that you are being prompted to perform
some action.
1 IMPRESSA C5 – Click & Drink
1
IMPRESSA C5 – Click & Drink
Coffee that fulfils your
wildest dreams
JURA‘s avowed mission is to develop superior machines which get
the best out of every blend and roast of coffee. This it delivers
through a unique, intelligent pre-brew system combined with loving attention to detail.
Click & Drink
The IMPRESSA C5 demonstrates just how wonderful a perfect cup
of coffee can taste and how easy it is to prepare one. Thus, the further development of the IMPRESSA compact series is setting new
standards in coffee quality while at the same time maintaining a
visually pleasing appearance from every angle. The smart control
philosophy is especially to be admired. The various speciality coffees
can be selected simply and intuitively using a single control
element.
p
Click & Drink
Thanks to the revolutionary one-switch operation philosophy
with the smart Rotary Switch, you are only a single touch of a
button away from enjoying a perfect cup of coffee. To make
your choice, all you have to do is to rotate the switch between
coffee and Espresso, one or two cups. Just click the control and
seconds later you can be enjoying your drink.
p
Indicators
The easy-to-understand indicators light up in a regal red, providing the information that you need. Just one click of the
Rotary Switch away, unobtrusively concealed, are the maintenance buttons with associated indicators.
p
Height-adjustable coffee spout
Whether you are after a small cup of Espresso or a large cup
of breakfast coffee, the height-adjustable coffee spout, which
can be raised and lowered between 65 and 111 mm, can be
adjusted on a continuous scale to suit all sizes of cup. This prevents coffee splashing on the machine and is your guarantee
of a rich, thick crema. The superior design and feel of the
machine are also evident.
9
1 IMPRESSA C5 – Click & Drink
p
JURA on the Internet
Connector System©
The Connector System© allows one to use the Easy Cappuccino Frother, which is fitted as standard, a hot water nozzle for
an even jet of water and the optionally available 2-stage frothing nozzle or the Professional Cappuccino Frother for perfect
milk foam or hot milk.
Visit us on the Internet.
@ At www.jura.com you will find interesting and up-to-date
information on your IMPRESSA and on every aspect of the
subject of coffee.
Knowledge Builder
You can familiarise yourself with your IMPRESSA C5 in a fun way on
the PC.
@ The Knowledge Builder awaits you at www.jura.com. The
interactive assistant, LEO, will support you and explain the
benefits of and how to use your IMPRESSA.
10
2 Preparing and using your IMPRESSA for the first time
2 Preparing and using your IMPRESSA for the first time
This chapter provides you with the information you need to use your
IMPRESSA without any problems. You will prepare your IMPRESSA
step-by-step for your first coffee experience using it.
Setting up
When setting up your IMPRESSA, please note the following:
Set the IMPRESSA down on a horizontal surface that is not
sensitive to water.
Choose a spot for your IMPRESSA which is protected against
overheating. Ensure that the ventilation slots are not covered.
p
p
Filling the water tank
CAUTION
To enjoy perfect coffee, we recommend that you change the water
every day.
Milk, mineral water or other liquids can damage the water tank or
the machine.
l Only fill the water tank with fresh, cold water.
l Open the cover of the water tank.
l Remove the water tank and rinse it with cold water.
l Fill the water tank with fresh, cold mains water and reinsert.
l Close the cover of the water tank.
Filling the bean
container
The bean container has an aroma preservation cover. This will ensure
that your coffee beans retain their aroma for longer.
CAUTION
Coffee beans which have been treated with additives (e.g. sugar),
either pre-ground or in the form of freeze-dried coffee, will damage
the grinder.
l Only use untreated coffee beans to refill the bean container.
l Open the cover of the bean container and remove the aroma
preservation cover.
l Remove any dirt or foreign objects inside the bean container.
l New machines contain an information sheet in the bean
container. Remove this information sheet.
11
2 Preparing and using your IMPRESSA for the first time
l Fill the bean container with coffee beans, then close the
aroma preservation cover and the bean container cover.
First-time use
WARNING
If the machine is operated with a defective power cable, there is a
danger of electric shock.
l Never use a machine which has a defective power cable.
Precondition: the water tank must be full.
l Remove the protective film from the symbol display.
l Insert the mains plug into a power socket.
G l Press the On/Off button to switch the IMPRESSA on.
The light segment by the switch will now flash.
l Place a receptacle under the Easy Cappuccino Frother.
r l Turn the switch in the anticlockwise direction.
t
m
The light segment by the switch will now light up. The system
will now be filled with water. A small amount of water will
flow out of the Easy Cappuccino Frother.
The operation stops automatically. The light segment by the
switch will now flash.
l Turn the switch in the clockwise direction.
As long as the machine is heating up, the Maintenance
symbol h will flash. The Maintenance symbol h lights up.
l Place a receptacle under the coffee spout.
l Press the Rotary Switch.
The machine will rinse itself, stopping automatically.
The 1 Espresso symbol a will light up indicating that your
IMPRESSA is ready to use.
o After the first time that a coffee speciality has been prepared,
12
you may find that the maintenance indicator and the bean
container c display flash if the grinder has not yet been filled
with coffee beans. In that case, prepare a different coffee
speciality.
2 Preparing and using your IMPRESSA for the first time
Using and activating
filter
Your IMPRESSA no longer has to be descaled if you are using CLARIS
filter cartridges.
o Perform the ‘Using filter’ operation without a break. This will
ensure that your IMPRESSA always produces its best.
@ You can also try out the ‘Using filter’ operation online. Visit the
Knowledge Builder on www.jura.com.
l Remove the packaging on the CLARIS filter cartridge.
l Remove the water tank and empty it.
l Lift the cartridge holder and insert the filter cartridge into
the water tank, applying a light pressure.
l Close the cartridge holder. It will lock into place audibly.
l Fill the water tank with cold, fresh mains water and reinsert.
o After two months, the filter will cease to work. Monitor the
elapsed time as shown on the date plate on the cartridge
holder.
Precondition: your IMPRESSA is ready for use.
l Open the access door.
ä l Turn the Rotary Switch so that it points to the P symbol P.
m l Press the Rotary Switch.
The cleaning, descaling and filter indicators light up.
n l Hold down the Filter button until the Filter indicator n
lights up.
ä l Turn the Rotary Switch until the 3 light segments around the
Rotary Switch light up.
o When the 3 light segments light up, the filter is activated. If
none of the light segments light up, this means that the filter
has not been activated.
m l Press the Rotary Switch to confirm the setting.
The light segment by the switch will now flash.
13
2 Preparing and using your IMPRESSA for the first time
l Place a receptacle (containing at least 500 ml) under the
Easy Cappuccino Frother.
l If the milk pipe is connected, remove it.
r l Turn the switch in the anticlockwise direction.
Rinsing of the filter will now begin. The light segment by the
switch will light up.
o You can interrupt rinsing of the filter at any time. To do this,
turn the switch clockwise. Turn the switch anticlockwise to
continue rinsing the filter.
o The water could be slightly discoloured. This is not harmful to
health, nor does it affect the taste.
t
14
Rinsing of the filter will automatically stop after approx.
500 ml, and the light segment by the switch will then flash.
l Turn the switch in the clockwise direction.
As long as the machine is heating up, the Maintenance symbol h will flash. The IMPRESSA is ready for use again. The
filter is now activated.
2 Preparing and using your IMPRESSA for the first time
Assessing and setting
water hardness
The harder the water is, the more frequently the IMPRESSA needs to
be descaled. It is therefore important to set the water hardness.
o However, if you are using the CLARIS filter cartridge and have
activated the filter, you will not be able to adjust the water
hardness.
The symbols in the symbol display show the configured degree of
water hardness. The number of symbols corresponds to the relevant
level.
Level
Water hardness
Shown in display
0
The water hardness is switched off, the automatic
calcification indicator is switched off
No symbol is illuminated
1
German degree of water hardness 1 – 7° dH
French degree of water hardness 1.79 – 12.53° f
1 symbol is illuminated
German degree of water hardness 8 – 15° dH
French degree of water hardness 14.32 – 26.85° f
2 symbols are illuminated
German degree of water hardness 16 – 23° dH
French degree of water hardness 28.64 – 41.14° f
3 symbols are illuminated
German degree of water hardness 24 – 30° dH
French degree of water hardness 42.96 – 53.7° f
4 symbols are illuminated
2
3
4
A
AS
ASD
ASDF
You can find out what the water hardness is, using the Aquadur®
test strip enclosed in the Welcome Pack.
l Hold the test strip briefly (for one second) under flowing
mains water. Shake off the water.
l Wait for about 1 minute.
l You will then be able to read the degree of water hardness
from the discoloration of the Aquadur® test strip and the
description on the packaging.
You can now configure the water hardness.
Example: to change the water hardness from level 3 to level 4,
proceed as follows:
Precondition: your IMPRESSA is ready for use.
l Open the access door.
15
2 Preparing and using your IMPRESSA for the first time
b l Hold down the Descaling button until the Descaling indi-
ä
m
Adjusting grinder
CAUTION
cator b lights up.
The Descaling indicator b and the symbols A S D will
now light up.
l Turn the Rotary Switch until the four symbols a s d f
light up.
l Press the Rotary Switch to confirm the level 4 setting.
The IMPRESSA is ready for use again. The water hardness is
now set.
You can adjust the grinder continuously to suit the roast of your
coffee.
If you adjust the fineness of grind when the grinder is not operating,
the grinding wheel could be damaged.
l Only adjust the fineness of grind when the grinder is running.
The consistency of grind setting is correct if the coffee flows regularly from the coffee spout. In addition a fine, thick crema forms.
Example: to change the fineness of grinding during preparation of
a coffee, proceed as follows:
l Open the cover of the bean container and remove the aroma
preservation cover.
l Place a cup under the coffee spout.
ä l Turn the Rotary Switch to the 1 coffee setting D.
m l Press the Rotary Switch to initiate preparation of the coffee.
The grinder will now start up, and the 1 coffee symbol D
flashes.
l Turn the fineness of grind switch to the desired position
while the grinder is running.
The coffee will be prepared and the fineness of grind is set.
16
2 Preparing and using your IMPRESSA for the first time
Switching on
When the IMPRESSA is switched on, a prompt to perform a rinse
operation automatically appears.
G l Press the On/Off button to switch the IMPRESSA on.
m
Switching off
As long as the machine is heating up, the Maintenance
symbol h will flash. The Maintenance symbol h lights up.
l Place a receptacle under the coffee spout.
l Press the Rotary Switch to start the rinse operation.
The coffee spout will be rinsed. The operation stops automatically and your IMPRESSA is now ready for use.
When you switch off your IMPRESSA, the system is automatically
rinsed.
l Place a receptacle under the coffee spout.
G l Press the On/Off button to switch the IMPRESSA off.
The system is rinsed and the Maintenance symbol
flashes. The operation stops automatically.
The IMPRESSA is switched off
H
o When the IMPRESSA is switched off with the On/Off button,
the machine consumes less than 0.01 W of standby energy.
17
3 Familiarising yourself with the control options
3 Familiarising yourself with the control options
With the IMPRESSA, you can prepare an excellent coffee speciality
at the touch of a button. You also have the option of adjusting the
coffee strength and amount of water to your personal taste while
the coffee is brewing.
This chapter will show you how to operate the machine with the aid
of examples. To familiarise yourself with your IMPRESSA, we recommend that you make a point of actively trying the facilities described
in this chapter. You will find this is well worthwhile.
Learn how to perform the following:
Preparing drinks at the touch of a button
Adjusting the settings on a one-off basis while your drink is
being prepared
Adjusting the permanent cup size settings
p
p
p
o You can stop the machine at any time while a coffee speciality
is being prepared. To do this press the Rotary Switch.
@ If you prefer to familiarise yourself with your IMPRESSA in a fun
way on the PC, the interactive Knowledge Builder tutorial program can be found on the Internet at www.jura.com.
Preparing drinks at the
touch of a button
Prepare your favourite coffee speciality at the touch of a button.
All coffee specialities are prepared following this model at the touch
of a button.
o Unless you change the permanent settings, all coffee specialities prepared at the touch of a button will have a coffee
strength of mild.
18
3 Familiarising yourself with the control options
Example: this is how to prepare an Espresso.
l Place an Espresso cup under the coffee spout.
ä l Turn the Rotary Switch to the 1 Espresso setting a.
m l Press the Rotary Switch to initiate preparation of the
Espresso.
The 1 Espresso symbol a will now flash, and the pre-set
amount of water wll flow into the cup.
Drink preparation stops automatically.
One-off setting during
drink preparation
You can change both the coffee strength and the amount of water
while your drink is being prepared. These settings are not saved.
One-off settings during coffee preparation always follow this
model.
o During the grinding operation, the light segments above the
Rotary Switch indicate the coffee strength. The coffee
strength can be altered while 1 Espresso or 1 coffee is being
prepared.
The coffee strength options available are as follows:
Coffee strength
Shown in symbol display
Mild
1 light segment is illuminated
Normal
2 light segments are illuminated
Strong
3 light segments are illuminated
o During the brew operation, the light segments indicate the
amount of water. At this stage of the operation, you can
change the amount of water by turning the Rotary Switch.
Example: this is how to prepare a strong coffee.
l Place a cup under the coffee spout.
ä l Turn the Rotary Switch to the 1 coffee setting d.
m l Press the Rotary Switch to initiate preparation of the coffee.
The grinder starts up, the 1 coffee symbol d flashes, and one
light segment above the Rotary Switch is illuminated.
19
3 Familiarising yourself with the control options
ä l While the grinder is running, turn the Rotary Switch in a
clockwise direction until three light segments have lit up.
The grinding operation stops, brewing begins and the predefined quantity of water flows into the cup.
Drink preparation stops automatically.
Adjusting the permanent cup size settings
It is easy to adjust the amount of water for all coffee specialities to
the cup size for good. As in the following example, adjust the amount
of water once. Every time you prepare a drink in the future, this
amount of water will be dispensed.
Permanent adjustment of cup size works the same way for all coffee
specialities.
Example: to permanently adjust the amount of water for an
Espresso, you should proceed as follows:
l Place an Espresso cup under the coffee spout.
ä l Turn the Rotary Switch to the 1 Espresso setting a.
m l Keep the Rotary Switch pressed down until the light segment flashes above the Rotary Switch.
Coffee preparation will start and the Espresso will flow into
the cup.
m l Press the Rotary Switch again when enough Espresso has
flown into the cup.
Espresso preparation will now stop. Your IMPRESSA will
remember the amount of water you have specified for an
Espresso for good.
o You can alter these settings at any time by repeating the
above procedure.
20
4 Preparing drinks at the touch of a button
4 Preparing drinks at the touch of a button
This chapter will explain how to prepare coffee specialities, milk and
hot water.
Chapter 3, ‘Familiarising yourself with the control options’, will teach
you how to adjust the settings to your personal preferences.
o You can stop the machine at any time while a coffee speciality
is being prepared. To do this press the Rotary Switch.
@ You can also try out the preparation of coffee specialities
online. Visit the Knowledge Builder on www.jura.com.
Espresso and coffee
All speciality coffees (espresso a and coffee d) are prepared following this model.
Example: this is how to prepare a coffee.
l Place a cup under the coffee spout.
ä l Turn the Rotary Switch to the 1 coffee setting d.
m l Press the Rotary Switch to initiate preparation of the coffee.
The 1 coffee symbol d will now flash, and the pre-set amount
of water will flow into the cup.
Drink preparation stops automatically.
To prepare two cups of coffee, place two cups under the coffee spout
and turn the Rotary Switch to the symbol for 2 coffees f, then press
the switch to initiate coffee preparation.
Cappuccino
Precondition: your IMPRESSA is ready to use, the Easy Cappuccino
Frother is mounted.
l Take the milk pipe out of the Welcome Pack.
l Take the protective cap off the Easy Cappuccino Frother.
l Attach the milk pipe to the frother.
l Insert the other end in a milk Tetrapack or connect it to a
milk container.
21
4 Preparing drinks at the touch of a button
l Place a cup under the Easy Cappuccino Frother.
ä l Turn the Rotary Switch so that it points to the Steam
symbol k.
m l Press the Rotary Switch to confirm your choice.
The Steam symbol k will continue flashing until
r
t
the
IMPRESSA has warmed up. As soon as the required temperature has been reached, the light segment by the switch will
flash.
l Turn the switch in the anticlockwise direction.
The milk foam will be prepared.
l Turn the switch in the clockwise direction when there is
sufficient milk foam in the cup.
o As long as the light segment continues to flash on the switch,
you can continue preparing milk foam.
l Move the cup under the coffee spout.
ä l Turn the Rotary Switch to the 1 Espresso setting a.
m l Press the Rotary Switch to initiate preparation
of the
Espresso.
The 1 Espresso symbol a will now flash, and the pre-set
amount of water will flow into the cup.
Drink preparation stops automatically.
To ensure that the Easy Cappuccino Frother works perfectly, you
should clean it regularly. For further information on cleaning, see
Chapter 6, ‘Maintenance – cleaning the Easy Cappuccino Frother’.
Pre-ground coffee
You can choose a second variety of coffee with the filler funnel for
pre-ground coffee.
All coffee specialities using pre-ground coffee are prepared in the
same way.
o Never add more than two level measuring spoons of preground coffee.
o Use pre-ground coffee which is not ground too finely. Very
fine coffee can block up the system so that the coffee only
comes out in drips.
22
4 Preparing drinks at the touch of a button
o If you have added too little pre-ground coffee, the IMPRESSA
will come to a halt ready for further use.
Example: proceed as follows to prepare a cup of coffee using preground coffee.
l Take the measuring spoon for pre-ground coffee out of the
Welcome Pack.
ä l Turn the Rotary Switch so that it points to the pre-ground
coffee symbol j.
m l Press the Rotary Switch to confirm your choice.
The pre-ground coffee symbol j will flash.
l Place a cup under the coffee spout.
l Open the filler funnel for pre-ground coffee.
l Place one level measuring spoon of pre-ground coffee in the
filler funnel.
ä l Turn the Rotary Switch to the 1 coffee setting d.
m l Press the Rotary Switch to initiate preparation of the coffee.
The symbols for pre-ground coffee j and 1 coffee d will
flash, and the pre-configured amount of water will flow into
the cup.
Drink preparation stops automatically.
To prepare two cups of pre-ground coffee, place two cups under
the coffee spout, add two level measuring spoons of pre-ground
coffee to the filler funnel, turn the Rotary Switch to the symbol for
2 coffees f and then press to initiate preparation of the coffee.
23
4 Preparing drinks at the touch of a button
Milk foam
Precondition: your IMPRESSA is ready to use, the Easy Cappuccino
Frother is mounted.
l Take the milk pipe out of the Welcome Pack.
l Take the protective cap off the Easy Cappuccino Frother.
l Attach the milk pipe to the frother.
l Insert the other end in a milk Tetrapack or connect it to a
milk container.
l Place a cup under the Easy Cappuccino Frother.
ä l Turn the Rotary Switch so that it points to the Steam
symbol k.
m l Press the Rotary Switch to confirm your choice.
The Steam symbol k will continue flashing until
r
t
the
IMPRESSA has warmed up. As soon as the required temperature has been reached, the light segment by the switch will
flash.
l Turn the switch in the anticlockwise direction.
The milk foam will be prepared.
l Turn the switch in the clockwise direction when there is
sufficient milk foam in the cup.
o As long as the light segment continues to flash by the switch,
you can continue preparing milk foam.
To ensure that the Easy Cappuccino Frother works perfectly, you
should clean it daily. Further information can be found in Chapter 6,
‘Maintenance – cleaning the Easy Cappuccino Frother’.
Hot water
CAUTION
To obtain a perfect water flow, attach the removable hot water
nozzle.
There is a danger of scalding from hot water splashes.
l Avoid direct contact with the skin.
Start by replacing the nozzle:
l Carefully remove the Easy Cappuccino Frother from the
Connector System©.
24
4 Preparing drinks at the touch of a button
l Take the hot water nozzle out of the Welcome Pack.
l Insert this into the Connector System with a light turning
©
motion.
l Place a cup under the hot water nozzle.
Precondition: your IMPRESSA is ready for use.
r l Turn the switch in the anticlockwise direction.
The light segment on the switch will light up and hot water
will flow into the cup.
t l Turn the switch in the clockwise direction when there is
sufficient water in the cup.
25
5 Adjusting the permanent settings in programming mode
5 Adjusting the permanent settings in programming mode
Automatic switch-off
By instructing your IMPRESSA to automatically switch itself off, you
can cut down your energy consumption. If this function is activated,
your IMPRESSA switches off automatically after the preset time following the last action on the machine.
The number of symbols illuminated indicates the programmable
switch-off time that has been activated in hours:
Switch-off time
Shown in symbol display
Meaning
1 hour
1 symbol is illuminated
Switch-off after 1 hour
2 hours
2 symbols are illuminated
4 hours
8 hours
a
as
3 symbols are illuminated a s d
4 symbols are illuminated a s d f
Switch-off after 2 hours
Switch-off after 4 hours
Switch-off after 8 hours
Example: to amend the programmable switch-off time from 2 hours
to 4, you should proceed as follows:
Precondition: your IMPRESSA is ready for use.
l Open the access door.
ä l Turn the Rotary Switch so that it points to the P symbol P.
m l Press the Rotary Switch.
The cleaning, descaling and filter indicators light up.
v l Hold down the Cleaning button until the Cleaning indicator v lights up.
The IMPRESSA is in programming mode, the Cleaning indicator v and the symbols a s are illuminated.
ä l Turn the Rotary Switch until the 3 symbols a s d light up.
m l Press the Rotary Switch to confirm the setting.
The IMPRESSA is ready for use again. The programmable
switch-off time is now configured at 4 hours.
26
6 Maintenance
6 Maintenance
Your IMPRESSA has the following integrated maintenance programs:
Rinse the machine
Change the filter
Clean the machine
Descale the machine
p
p
p
p
The illuminated maintenance indicator draws your attention to the
maintenance actions that are necessary. Open the access door and
note the further indicators in the maintenance field. In the example
shown on the left, your IMPRESSA is prompting you to clean it.
o Clean or descale the machine or change the filter whenever
the appropriate indicator is lit up.
Maintenance tips
To ensure that you get many years' reliable service out of your
IMPRESSA and to guarantee the optimum coffee quality, the
machine requires daily maintenance.
You should proceed as follows:
Empty the coffee grounds container and the drip tray. Rinse
them with warm water.
Rinse the water tank with clean water.
Dismantle and rinse the Cappuccino Frother (see Chapter 6,
‘Maintenance – rinsing the Easy Cappuccino Frother’).
Wipe the surface of the machine with a damp cloth.
p
p
p
p
Rinsing the machine
o Once the IMPRESSA has heated up following switch-on, the
Maintenance symbol h will light up, prompting you to perform a rinse operation. To initiate the rinse operation, press
the Rotary Switch.
o When the IMPRESSA is switched off, a rinse operation is automatically performed.
27
6 Maintenance
Precondition: the IMPRESSA is ready for use.
l Place a receptacle under the coffee spout.
ä l Turn the Rotary Switch so that it points to the Maintenance
symbol h .
m l Press the Rotary Switch to start the rinse operation.
The rinse operation now starts and the Maintenance
symbol h flashes.
Rinsing stops automatically.
Your IMPRESSA is ready for use.
Changing the filter
o After 50 litres of water have been dispensed, the filter will
cease to work. Your IMPRESSA will automatically prompt you
to replace the filter.
o After two months, the filter will cease to work. Monitor the
elapsed time as shown on the date plate on the cartridge
holder.
o If the CLARIS filter cartridge is not activated, you will not be
prompted to change the filter.
Replacement following a
prompt
To change the CLARIS filter cartridge when prompted to do so by
your IMPRESSA, you should proceed as follows:
Precondition: the Maintenance indicator and the Filter indicator n
are illuminated.
l Remove the water tank and empty it.
l Lift the cartridge holder.
l Take out the old CLARIS filter cartridge.
l Insert the new CLARIS filter cartridge into the water tank,
pressing it lightly.
l Close the cartridge holder.
It will lock into place audibly.
l Fill the water tank with cold, fresh mains water and
reinsert.
28
6 Maintenance
l Place a receptacle (containing at least 500 ml) under the
Easy Cappuccino Frother.
l If the milk pipe is connected, remove it.
n l Hold down the Filter button until the Filter indicator n
flashes.
The light segment by the switch will now flash.
r l Turn the switch in the anticlockwise direction.
Rinsing of the filter will now begin. The light segment by the
switch will now light up.
o You can interrupt rinsing of the filter at any time. To do this,
turn the switch clockwise. Turn the switch anticlockwise to
continue rinsing the filter.
o The water could be slightly discoloured. This is not harmful to
health, nor does it affect the taste.
t
Manual filter change
Rinsing of the filter will automatically stop after approx.
500 ml, and the light segment by the switch will then flash.
l Turn the switch in the clockwise direction.
The Maintenance symbol h flashes, the IMPRESSA heats up
and is once again ready for use.
You can initiate the ‘Changing the filter’ operation manually. Start
when the first prompt appears , as described under ‘Replacement
following a prompt’.
l
Cleaning the machine
CAUTION
After dispensing 200 cups of coffee or performing 80 switch-on
rinses, the IMPRESSA will prompt you to clean it.
If the wrong cleaning agent is used, the machine could be damaged
and/or traces of detergent could be left behind in the water.
l Use only original JURA care products.
o The cleaning program only lasts about 15 minutes.
o Do not interrupt the cleaning program, as this will impair the
quality of cleaning.
o Your dealer will stock JURA cleaning tablets.
29
6 Maintenance
@ Try out the ‘Cleaning the machine’ operation online. Visit the
Knowledge Builder on www.jura.com.
Cleaning following
a prompt
To clean your IMPRESSA when prompted to do so, you should
proceed as follows:
Precondition: the Maintenance indicator and the Cleaning
indicator v are illuminated.
v l Hold down the Cleaning button until the Cleaning
indicator v flashes.
The coffee grounds container indicator x now flashes.
l Empty the drip tray and the coffee grounds container.
l Insert the empty drip tray and coffee grounds container
back in the machine.
The Cleaning indicator v will now light up.
l Place a receptacle under the coffee spout.
v l Press the Cleaning button.
The Cleaning indicator v now flashes. Water flows out of
the coffee spout.
The process is interrupted. The pre-ground coffee symbol j
flashes and the Cleaning indicator v lights up.
l Open the cover of the filler funnel for pre-ground coffee.
l Insert a JURA cleaning tablet into the filler funnel.
l Close the cover of the filler funnel.
v l Press the Cleaning button.
The Cleaning indicator v now flashes. Water flows out of
the coffee spout once again.
The operation stops, the coffee grounds container
indicator x flashes.
l Empty the drip tray and the coffee grounds container.
l Insert the empty drip tray and coffee grounds container
back in the machine.
The cleaning operation is now complete. The IMPRESSA
heats up and is once again ready for use.
Manual cleaning
30
You can initiate the ‘Cleaning the machine’ operation manually.
Start when the first prompt appears l, as described under ‘Cleaning
following a prompt’.
6 Maintenance
Descaling the machine
CAUTION
The IMPRESSA builds up deposits of limescale over time and automatically prompts you to descale it when necessary. The degree of
calcification depends on the degree of hardness of your water.
If the descaling agent comes into contact with the skin or eyes, this
can cause irritation.
l Avoid contact with the skin or eyes.
l Rinse the descaling agent off with clean water. Should you get
any descaling agent in your eye, see a doctor.
CAUTION
If the wrong descaling agent is used, the machine could be damaged and/or traces of detergent could be left behind in the water.
l Use only original JURA care products.
CAUTION
If the descaling operation is interrupted, it is possible that the
machine could be damaged.
l Allow the descaling program to run to the end.
CAUTION
If the descaling agent comes into contact with sensitive surfaces, the
possibility of damage cannot be excluded.
l Clean up any splashes immediately.
o The descaling program lasts approx. 40 minutes.
o Your dealer will stock JURA descaling tablets.
@ Try out the ‘Descaling the machine’ operation online. Visit the
Knowledge Builder on www.jura.com.
Descaling following
a prompt
To descale your IMPRESSA when prompted to do so, you should
proceed as follows:
Precondition: the maintenance indicator and the Descaling indicator b are lit up.
b l Hold down the Descaling button until the Descaling indicator b flashes.
The coffee grounds container indicator x now flashes.
l Empty the drip tray and the coffee grounds container.
l Insert the empty drip tray and coffee grounds container
back in the machine.
31
6 Maintenance
The Water Tank indicator y now flashes.
l Remove the water tank and empty it.
l Completely dissolve the contents of one blister (3 JURA descaling tablets) in a container that holds 500 ml of water. This
can take a few minutes.
l Pour the solution into the empty water tank.
l Insert the water tank.
l Remove the frother.
l Place a container under the Connector System .
©
r l Turn the switch in the anticlockwise direction.
t
32
This causes water to flow out of the Connector System©.
The light segment by the switch lights up during the descaling operation.
The operation stops automatically, and the light segment by
the switch flashes.
l Turn the switch in the clockwise direction.
The descaling operation will resume. After a few minutes,
the coffee grounds container indicator x flashes.
l Empty the container under the Connector System©.
l Empty the drip tray and the coffee grounds container.
l Insert the empty drip tray and coffee grounds container
back in the machine.
The Water Tank indicator y now flashes.
l Rinse the water tank thoroughly and fill it with cold, fresh
mains water.
l Put the water tank back in.
The light segment by the switch will now flash.
l Place a container under the Connector System©.
6 Maintenance
r l Turn the switch in the anticlockwise direction.
t
This causes water to flow out of the Connector System©.
The operation stops automatically, and the light segment by
the switch flashes.
l Turn the switch in the clockwise direction.
The descaling operation will resume. After a few minutes,
the coffee grounds container indicator x flashes.
l Empty the drip tray and the coffee grounds container.
l Insert the empty drip tray and coffee grounds container
back in the machine.
l Put back the frother.
The descaling operation is now complete. The Maintenance
symbol h flashes, the IMPRESSA heats up and is once
again ready for use.
o If the descaling operation stops unexpectedly, rinse the water
tank thoroughly.
Manual descaling
You can initiate the operation ‘Descaling the machine’ manually.
Start when the first prompt appears l, as described under ‘Descaling following a prompt’.
Rinsing the Easy
Cappuccino Frother
To ensure that the Easy Cappuccino Frother works perfectly, you
should rinse it with water whenever you have prepared some milk.
o The IMPRESSA will not prompt you to rinse the Easy Cappuccino Frother.
l Carefully remove the Easy Cappuccino Frother from the
Connector System©.
l Take the Easy Cappuccino Frother apart.
l Rinse all the frother parts thoroughly under running water.
l Reassemble the Easy Cappuccino Frother and attach it to the
Connector System©.
33
6 Maintenance
Cleaning the Easy
Cappuccino Frother
To ensure that the Easy Cappuccino Frother works perfectly, you
should clean it daily when you have been preparing milk.
o The IMPRESSA will not prompt you to clean the Easy Cappuccino Frother.
o Your dealer will stock the JURA Cappuccino Cleaner.
CAUTION
If the wrong cleaning agent is used, the machine could be damaged
and/or traces of detergent could be left behind in the water.
l Use only original JURA care products.
@ Try this operation out on the Internet. Visit the Knowledge
Builder on www.jura.com.
Precondition: your IMPRESSA is ready for use.
l Place a receptacle under the Easy Cappuccino Frother.
l Pour 250 ml of fresh water into a container and add one
capful (max. 15 ml) of Cappuccino Cleaner.
l Immerse the milk pipe in the receptacle.
ä l Turn the Rotary Switch so that it points to the Steam
symbol k .
m l Press the Rotary Switch to confirm the action.
The Steam symbol k will continue flashing until the
IMPRESSA has warmed up.
As soon as the required temperature has been reached, the
light segment by the switch will flash.
r l Turn the switch in the anticlockwise direction.
The frother and pipe will be cleaned.
t l Turn the switch in the clockwise direction as soon as the container holding the Cappuccino Cleaner is empty.
The light segment by the switch will now flash.
l Fill the receptacle with 250 ml of fresh water and immerse
the milk pipe in it.
34
6 Maintenance
o Perform the next step as soon as the light segment by the
switch is flashing. This means that the IMPRESSA has reached
the temperature necessary for steam. If the light segment is
no longer flashing, turn the Rotary Switch once again to the
Steam symbol k and press the Rotary Switch. As soon as the
required temperature has been reached, the light segment by
the switch will flash again.
r l Turn the switch in the anticlockwise direction.
The frother and pipe are rinsed with fresh water.
t l Turn the switch in the clockwise direction as soon as the container holding the water is empty.
Cleaning of the Easy Cappuccino Frother is now complete
and your IMPRESSA is ready to use again.
Descaling
the water tank
The water tank may build up deposits of limescale. In order to
ensure perfect working order, descale the water tank from time to
time.
l Remove the water tank.
l If you use a CLARIS filter cartridge, remove this.
l Descale the tank with a mild, commercially available descaling agent in accordance with the instructions of the manufacturer.
l Rinse the water tank with clean water afterwards.
l If you use a CLARIS filter cartridge, insert this again.
l Fill the water tank with fresh water and insert it again.
35
7 Messages in the maintenance field and symbol display
7 Messages in the maintenance field and symbol display
Message
Cause/Result
Action
Maintenance indicator is
illuminated or is flashing.
The IMPRESSA wants to tell you
something.
l Open the access door and
note the other indicators.
Maintenance indicator and
Water Tank indicator y are
flashing.
Water tank is empty.
You cannot prepare any coffee
or hot water.
l Fill the water tank
Maintenance indicator and
coffee grounds container
indicator x are flashing.
Coffee grounds container is full.
You cannot prepare any coffee
but you can obtain hot water.
l Empty the coffee grounds
Maintenance indicator and
bean container indicator c
are flashing.
Bean container is empty.
You cannot prepare any coffee
but you can obtain hot water.
l Fill the bean container.
Maintenance indicator
and Cleaning indicator v
light up.
The IMPRESSA will prompt you
to clean it after 200 cups of
coffee or 80 switch-on rinses.
l Perform cleaning operation
Maintenance indicator and
Descaling indicator b light
up.
The IMPRESSA is prompting you l Perform descaling operation
(see Chapter 6, ‘Maintenance –
to descale it.
Descaling the machine’).
(see Chapter 2, ‘Preparing and
using your IMPRESSA for the
first time – Filling the water
tank’).
container and the drip tray.
The indicator will go out after
you have prepared one coffee
speciality
(see Chapter 2, ‘Preparing and
using your IMPRESSA for the
first time – Filling the bean
container’).
(see Chapter 6, ‘Maintenance –
Cleaning the machine’).
Maintenance indicator
The CLARIS filter cartridge is
and Filter indicator n light exhausted.
up.
l Change the CLARIS filter
Maintenance indicator
and Cleaning indicator v
flash twice.
l Wait a few minutes.
36
System is too hot to clean.
cartridge (see Chapter 6,
‘Maintenance – Changing the
filter’).
7 Messages in the maintenance field and symbol display
Message
Cause/Result
Action
Maintenance indicator and
Descaling indicator b
flash twice.
System is too hot to descale.
l Wait a few minutes.
Maintenance symbol h
flashes twice.
System is too hot for maintenance and switch-off rinses.
l Wait a few minutes.
Maintenance indicator and
all the indicators
y x c v b n behind
the access door are flashing
synchronously.
There is a general fault.
l Switch the IMPRESSA off with
the On/Off button G .
If the problem persists when you
turn the machine back on again,
contact Customer Support in
your country (see ‘JURA contact
details / Legal information’).
37
8 Troubleshooting
8 Troubleshooting
Problem
Cause/Result
Action
Grinder is making a very
loud noise.
There are some
foreign bodies in the
grinder.
l Contact Customer Support in your
The coffee grounds
container indicator x is
flashing continuously.
Drawer with coffee
grounds container has
not been correctly
inserted.
l Insert the drawer correctly.
The frother does not
produce enough milk
foam.
Easy Cappuccino
Frother is dirty.
l Clean the Easy Cappuccino Frother
Coffee only comes out in
drips.
Coffee or pre-ground
coffee has been
ground too fine and is
blocking the sieve.
l Put the grinder on a coarser setting or
Water hardness cannot be
adjusted.
CLARIS filter cartridge
is activated.
l Deactivate the CLARIS filter cartridge
The maintenance indicator
lights up and the bean
container indicator c
continues to flash although
it has been filled.
The machine will not
be able to tell that the
bean container has
been filled until the
next time you make a
coffee.
l Prepare a coffee speciality.
country (see ‘JURA contact details / Legal
information’).
(see Chapter 6, ‘Maintenance – Cleaning
the Easy Cappuccino Frother’).
use coarser pre-ground coffee
(see Chapter 2, ‘Preparing and using your
IMPRESSA for the first time – Adjusting
grinder’).
(see Chapter 2, ‘Preparing and using your
IMPRESSA for the first time – Using and
activating filter’).
o If you have not been able to solve the problem, contact
Customer Support in your country (see ‘JURA contact
details / Legal information’).
38
9 Transport and environmentally neutral disposal
9 Transport and environmentally neutral disposal
Empty system
To protect the IMPRESSA from damage caused by frost during transportation, the system needs to be emptied.
Precondition: the IMPRESSA is ready for use.
l Place a receptacle under the frother.
ä l Turn the Rotary Switch so that it points to the Steam
symbol k .
m l Press the Rotary Switch to confirm your choice.
The Steam symbol k will continue flashing until the machine has warmed up. As soon as the required temperature
has been reached, the light segment by the switch will
flash.
r l Turn the switch in the anticlockwise direction.
Steam will now come out of the frother.
l Remove the water tank and empty it.
Steam will continue to flow out of the frother until the system is empty. The light segment by the switch will now
flash.
t l Turn the switch in the clockwise direction.
o The Maintenance indicator and the Water Tank indicator y
both flash. Please ignore these indicators.
G l Press the On/Off button to switch the IMPRESSA off.
o The next time you use the machine, you will need to refill the
system (see Chapter 2, ‘Preparing and using your IMPRESSA
for the first time – First-time use’).
Transport
Keep the packaging for your IMPRESSA. It is used to protect the
machine during transportation.
Disposal
Please dispose of old machines in an environmentally neutral way.
Old machines contain valuable materials capable of being recycled
which should be salvaged for recycling. Please therefore dispose of
old machines via suitable collection systems.
39
10 Technical data
10 Technical data
Voltage
220–240 V ~, 50 Hz
Power output
1450 W
Marks of conformity
Pump pressure
Static max. 15 bar
Holding capacity of water tank
1.9 litres
Holding capacity of bean container
200 g
Holding capacity of coffee grounds Approx. 16 portions
container
40
Cable length
Approx. 1.1 m
Weight
9 kg
Dimensions (W x H x D)
28 x 34.5 x 41 cm
Index
Index
A
D
Activate filter 13
Addresses 44
Adjusting
Grinder 16
Adjusting the amount of water
Descale
Water tank 35
Descaling 31
E
Easy Cappuccino Frother 4
One-off setting during drink preparation
19
Permanent adjusting the permanent cup
size settings 20
Altering coffee strength
One-off setting during drink preparation
19
Cleaning 34
Rinsing 33
Espresso preparation 21
F
Filling
Automatic switch-off 26
Bean container 11
Water tank 11
B
Filter
Bean container 4
Activating 13
Changing 28
Using 13
Filling 11
C
Cappuccino preparation 21
Changing
First-time use 12
G
Grinder
Filter 28
CLARIS filter cartridge
Activating 13
Changing 28
Using 13
Cleaning
Adjust 16
Ground coffee
Pre-ground coffee preparation 22
H
Hotline 44
Hot water preparation 24
Easy Cappuccino Frother 34
Machine 29
Coffee powder
Pre-ground coffee preparation 22
Coffee preparation 21
Coffee speciality 21
Coffee strength
One-off setting during drink preparation
19
Contact details 44
Customer support 44
J
JURA contact details 44
L
Legal information 44
M
Machine
Cleaning 29
Descaling 31
Rinsing 27
41
Index
Setting up 11
Swiching off 17
Switching on 17
Milk foam preparation 24
Water hardness 15
Assessing 15
Setting 15
Water tank 4
O
One-off setting during drink preparation 19
P
Pre-ground coffee preparation 22
Preparation
Cappuccino 21
Coffee 21
Espresso 21
Hot water 24
Milk foam 24
Pre-ground coffee 22
Programming mode
Automatic switch-off 26
Proper use 6
Putting into service
First-time use 12
R
Rinsing
Easy Cappuccino Frother 33
Machine 27
Rotary switch 9
S
Safety information 6
Setting
Water hardness 15
Setting up 11
Switching off 17
Switching on 17
U
Use, Proper 6
Using filter 13
42
W
Descaling 35
Filling 11
Index
43
Art. 68990/C5/en/201002
JURA contact details / Legal information
JURA Elektroapparate AG
Kaffeeweltstrasse 10
CH-4626 Niederbuchsiten
Phone: +41 62 38 98 233
@ Contact information is available on the company website at
www.jura.com.
Directives
The machine complies with the following EU directives:
2006/95/EC – Low Voltage Directive
2004/108/EC – Electromagnetic Compatibility
2009/125/EC – Ecodesign
p
p
p
Technical changes
We reserve the right to make technical changes.
The illustrations used in the IMPRESSA C5 Manual show the
IMPRESSA C5 platinum model. Your IMPRESSA could incorporate
minor changes.
Feedback
Your opinion is important to us!
Use the contact link at www.jura.com.
Copyright
The Instructions for Use contain information which is protected by
copyright. It is not permitted to photocopy or translate these
Instructions for Use into another language without the express
written consent of JURA Elektroapparate AG.
44
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising