Century 614 Formula IIT Aluminum Body [0501634] [07/2007]

Century 614 Formula IIT Aluminum Body [0501634] [07/2007]
CENTURY
L E G E N D A R Y
®
L E A D E R S H I P
OWNER'S MANUAL
614 / FIIT
ALUMINUM BODY
INSTALLATION, OPERATION, MAINTENANCE & PARTS
NOTE: MANUAL including SPECIFICATIONS, subject to change without notice
All ratings specified are based on structural factors only,
not vehicle capacities or capabilities.
CENTURY®
Miller Industries Towing Equipment Inc.
8503 Hilltop Drive
Ooltewah, Tennessee 37363
Phone (423) 238-4171 • FAX (423) 238-5371
FORM NO. 0501634
07 / 2007
PRICE $25.00
LIMITED WARRANTY
MILLER INDUSTRIES TOWING EQUIPMENT INC., hereinafter referred to as MILLER, warrants to the
original purchaser that each new MILLER wrecker or other MILLER products will be free from defects
in material and workmanship for a period of twelve (12) months from date placed in service, but in no
event shall such warranty period exceed twenty-four (24) months from date of manufacture by MILLER.
The purchaser must promptly notify MILLER in writing of any failure in material or workmanship. In no
event shall MILLER accept such notification later than twenty-four (24) months from date of delivery or
twelve (12) months from date placed in service, whichever is earlier.
MILLER's obligation under this warranty, statutory or otherwise, is limited to the repair or replacement
at the MILLER factory, or at a point designated by MILLER, of such part or parts as shall appear upon
inspection by MILLER to be defective in material or workmanship. New or remanufactured parts will
be used for any replacement at MILLER's option. This warranty is not transferable. This warranty does
not obligate MILLER to bear the cost of labor or transportation charges in connection with the repair
or replacement of any parts found to be defective, nor shall it apply to a product upon which repairs or
alterations have been made unless authorized by MILLER.
EXCEPT AS EXPRESSLY SET FORTH IN THIS WARRANTY, MILLER MAKES NO OTHER WARRANTY,
EXPRESS OR IMPLIED, AND HEREBY DISCLAIMS ALL OTHER WARRANTIES INCLUDING, BUT
NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. MILLER shall in no event be liable for claimed downtime, claimed loss of
profits or goodwill, or any other special, incidental, indirect, or consequential damages concerning or
relating to any product or parts, whether based on negligence, strict liability, breach of contract, breach
of warranty, misrepresentation or any other legal theory, regardless of whether the loss resulted from
any general or particular requirement which MILLER knew or had reason to know about at the time
of sale.
MILLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, AS TO THE FINISHED PRODUCTS
MANUFACTURED OR SUPPLIED BY ANOTHER MANUFACTURER AND SUPPLIED BY MILLER TO
PURCHASER, including, but not limited to, any vehicle to which a MILLER product may be affixed or
any accessories or wire rope, and MILLER EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE AS TO SUCH EQUIPMENT OR
PRODUCTS. This language shall in no way affect or diminish the rights of the purchaser to rely on such
warranties as are extended by such manufacturers or suppliers. MILLER shall, to the extent permitted
under applicable law, pass on to the purchaser such manufacturer's or seller's warranty.
MILLER, whose policy is one of continuous improvement, reserves the right to improve its products
through changes in design or materials as it may deem desirable without being obligated to incorporate
such changes in products previously sold. This warranty is not intended to cover or include the following
items, which are set forth by way of example and not limitation:
A.Normal deterioration of trim, paint, lettering, and appearance items due to wear or exposure to
weather, road conditions, road treatments, etc.
B.Any damage or defect due to accident, misuse, abuse, improper or unauthorized repairs,
failure to provide reasonable and necessary maintenance, or uses for which the equipment
was not designed or intended.
C.Alterations or modifications that affect performance, operation or reliability.
D.Normal maintenance parts including, but not limited to, wear pads, bushings, wire rope, mud
flaps, fenderettes, light bulbs, hydraulic oil, filters, and tow sling belts.
IT IS EXPRESSLY UNDERSTOOD THAT MILLER MAKES NO IMPLIED WARRANTY THAT MILLER
PRODUCTS SHALL BE FIT FOR THE PURPOSE OF LIFTING OR MOVING PEOPLE OR FOR ANY
OTHER IMPROPER USE.
Miller Industries Towing Equipment Inc.
8503 Hilltop Drive
Ooltewah, Tennessee 37363
Telephone (423) 238-4171
SERIAL NUMBER
Section VI - PARTS
This Section is provided by the manufacturer for the purpose of ordering
any component part of the CENTURY 614 Wrecker / Formula II T Underlift
that may be required when part replacement is necessary. Be certain to
use only original equipment replacement parts for warranty purposes as
well as for keeping your CENTURY 614 Wrecker / Formula II T Underlift
in its original state and optimum operating capacities.
When ordering replacement or spare parts be sure to provide the following
information to the manufacturer’s Parts Department.
1.
2.
3.
4.
5.
6.
7.
Manual Number & Date of Publication
Manual Page Number
Page Title
Reference Number of Part Desired
Part Number
Part Description
Quantity of Part Desired
Providing this information will help ensure that the correct parts will be
delivered to you in an expedient manner without delay. Should additional
information be required for repair or replacement of certain components,
contact your Wrecker Manufacturer Authorized Representative.
The Manufacturer reserves the right, without notice or obligation, to improve
or modify their products, which may change the specifications, models and
feature availability.
VI-
Section VI - PARTS (cont'd)
BODY ASSEMBLY
Section VI - PARTS (cont'd)
BODY ASSEMBLY
VI-
Section VI - PARTS (cont'd)
BODY ASSEMBLY
REF.
NO.
NO.
REQ'D
PART
NUMBER
DESCRIPTION
--
--
0907555
614 FII/T BASIC UNIT
--
--
0907557
SUBFRAME ASSEMBLY
112
54635
DOOR HINGE
2
6
54658
ROTARY PADDLE LATCH
3
4
54660
FRONT DOOR
4
2
54670
REAR DOOR
5
6
0300032
PLUG, 1" DIA HOLE D-4290
6
4
0301334
CATERPILLER GROMMET, 1/2"
7
2
0301862
CATERPILLAR GROMMET, 1/4"
81
0307303
TUNNEL BOX ASSEMBLY
9
2
0714649
MUDGUARD, CONTROL STATION
10117548004
SUBFRAME WELDMENT
111
0307301
LH BODY WELDMENT
121
0307302
RH BODY WELDMENT
13
8
04000661/4"-20 X 3/4" HHCS GR5 ZP
14
5
04000701/4"-20 X 1" HHCS GR5 ZP
15
8
04003691/4" J TYPE TINNERMAN
161
0714384
ACCESS COVER
171
0714514
ACCESS COVER, REAR
18
2
0705492
ANGLE, FRONT MTG
19
2
0705493
ANGLE, REAR MTG
20
2
0706553
ANGLE, MTG TAILGATE
211
0709093
ANGLE, LT MUDFLAP MTG
221
0709094
ANGLE, RT MUDFLAP MTG
--
23
24
--
30
30
0901302
0400264
0400421
KIT, HARDWARE, BODY MTG
5/8"-11 X 2.25" HHCS GR5 ZP
5/8"-11 NYLOK HEX NUT ZP
--
--
25
2
2610
2710
28
2
29
2
0901312
0301223
0400122
0400392
0710198
0705092
KIT, MUD FLAP-712
MUD FLAP, 820 EXP
3/8"-16 X 1.25" HHCS GR5 ZP
3/8"-16 NYLOK HEX NUT ZP
BRACKET, MARKER LIGHT
BAR, MUDFLAP
--
30
31
32
0902842
KIT, D-RING
0712380
D-RING
BA0259
PIN, D-RING
HD01061/4" X 1.75" SPRING PIN ZP
--
2
2
2
VI-
Section VI - PARTS (cont'd)
BODY ASSEMBLY (cont'd)
Section VI - PARTS (cont'd)
BODY ASSEMBLY (cont'd)
VI-
Section VI - PARTS (cont'd)
BODY ASSEMBLY (cont'd)
REF.
NO.
NO.
REQ'D
PART
NUMBER
DESCRIPTION
--
33
34
35
36
--
2
2
2
2
0907330
0303196
0400122
0400392
0400480
KIT, SAFETY CHAIN
CHAIN ASSEMBLY, 3/8" ALLOY
3/8"-16 X 1.25" HHCS GR5 ZP
3/8"-16 NYLOK HEX NUT ZP
3/8" FLAT WASHER ZP
--
37
38
39
40
41
42
43
--
2
4
10
4
10
16
2
0903165
GR400
0400036
0400070
0400357
0400367
0400451
0802565
KIT, STORAGE TUBE 552
RUBBER CATCH HOOD, HD 8"
#10-32 X 1" RD HD MCH HD SCR ZP
1/4"-20 X 1" HHCS GR5 ZP
#10-32 NYLOK HEX NUT ZP
1/4"-20 NYLOK HEX NUT ZP
1/4" FLAT WASHER ZP
TUBE, STORAGE, 552 L-ARM
--
44
45
46
47
48
49
--
4
2
2
2
6
4
0908785
0301741
0303123
0303124
0303126
0303127
0303128
LIGHT KIT, 614
SEALED MARKER LIGHT, RED
STOP & TURN LIGHT, RED
BACKUP LIGHT, CLEAR
MARKER (SEALED), AMBER
GROMMET, MARKER FOR 2.5"
GROMMET, TAILLIGHT
--
50
51
52
53
54
--
8
8
16
2
2
17549055
0402062
0402130
0402131
17547054
17547056
KIT, TUNNEL BOX MOUNTING
BOLT, HEX 1/2"-13 X 2" 316 SS
NUT, NYLOK 1/2"-13 316 SS
WASHER, 1/2" FLAT 316 SS
MOUNTING RUBBER, TUNNEL BOX
ANGLE, TUNNEL BOX MOUNTING
--
55
56
57
58
59
60
61
62
63
--
6
10
4
20
40
2
2
2
1
17549060
0402060
0402061
0402062
0402130
0402131
17547051
17547052
17547053
17548046
KIT, BODY MOUNTING
BOLT, HEX 1/2"-13 X 5" 316 SS
BOLT, HEX 1/2"-13 X 1-1/2" 316 SS
BOLT, HEX 1/2"-13 X 2" 316 SS
NUT, NYLOK 1/2"-13 316 SS
WASHER, 1/2" FLAT 316 SS
MOUNTING RUBBER, TAILGATE
MOUNTING RUBBER, CONTROL
MOUNTING RUBBER, FRONT
FRONT MOUNTING TUBE WELDMENT
VI-
Section VI - PARTS (cont'd)
FORMULA IIT UNDERLIFT ASSEMBLY
VI-
Section VI - PARTS (cont'd)
FORMULA IIT UNDERLIFT ASSEMBLY
REF.
NO.
NO.
REQ'D
PART
NUMBER
DESCRIPTION
--
1
2
3
4
5
6
--
4
4
8
12
2
2
0903530
0400264
0400265
0400421
0400506
0701941
0702157
HARDWARE, MTG F6500
5/8"-11 X 2-1/4" HHCS GR5 ZP
5/8"-11 X 4" HHCS GR5 ZP
5/8"-11 NYLOK HEX NUT ZP
5/8" FLATWASHER ZP
PLATE, W/L FRAME SPACER
TUBE, SPACER- FI W/L
--
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
--
--
--
--
--
8
1
2
2
8
4
2
8
2
1
1
1
2
2
1
1
1
1
2
1
0907389
0300113
0301582
0307117
0400078
0400130
0400152
0400367
0400392
0710092
0714088
0714182
0714349
0714350
0714761
0803988
0804170
0904630
0904632
0906419
0906853
W/L ASSEMBLY - FII/T
GREASE FITTING, ALEMITE
SLIDE PAD
CYLINDER, HYD TILT FIII
1/4"-20 X 2" HHCS GR5 ZP
3/8"-16 X 3.5" HHCS GR5 ZP
3/8"-24 X 5/8" FLAT HEAD
1/4"-20 NYLOK HEX NUT GR5 ZP
3/8"-16 NYLOK HEX NUT GR5 ZP
THRUST WASHER, 6500 W/L
PIN, EXT CYL BASE
PIN, LIFT CYL BASE
PIN, LIFT CYL (ROD)
PIN, TILT CYL (ROD)
STOP PLATE, OUTER BOOM
OUTER BOOM WELDMENT, FII/T
W/L FRAME, FII/T
INNER BOOM ASSEMBLY-FII/T
LIFT CYLINDER ASSEMBLY
UPPER LINK ASSEMBLY, FII/T
CROSSBAR ASSEMBLY (56") W/CNTR BORE
VI-
Section VI - PARTS (cont'd)
FORMULA IIT UNDERLIFT ASSEMBLY (cont'd)
VI-
Section VI - PARTS (cont'd)
FORMULA IIT UNDERLIFT ASSEMBLY (cont'd)
REF.
NO.
NO.
REQ'D
PART
NUMBER
DESCRIPTION
--
23
24
--
2
2
0904631
HD67B
HD68B
W/L ASSEMBLY - FII/T (cont'd)
PIN, UPPER LINK
PIN, LOWER LINK
--
25
26
27
28
29
30
31
32
--
2
1
1
1
1
1
1
1
0904630
0301397
0301582
0303065
0306748
0400139
0400392
0709536
0803966
INNER BOOM ASSEMBLY-FII/T
GREASE FITTING, 90 DEG
SLIDE PAD
CYL, HYD EXT, F6500 W/L
AL BRONZE BUSHING 0301914
3/8"-16 X 1.5" HEX SKT SET
3/8"-16 NYLOK HEX NUT ZP
PIN, EXTEND CYL, ROD
INNER BOOM WELDMENT
--
33
34
--
2
1
0904632
0300113
0303884
LIFT CYLINDER ASSEMBLY
GREASE FITTING, ALEMITE
CYL HYD LIFT, FII
--
35
36
--
2
1
0906419
0302928
0804391
UPPER LINK ASSEMBLY, FII/T
BEARING, GARMAX GM2428-32
ARM UPPER LINK WELDMENT, FII/T
--
37
38
39
40
41
42
43
--
1
1
1
1
2
1
1
0906853
0300113
0301197
0301398
0708470
0716576
0805857
0805858
CROSSBAR ASSEMBLY (56") W/CNTR BORE
GREASE FITTING, 1/4"-28 STRAIGHT
COMP. SPRING, CROSSBAR, FI
1-3/16" DIA STEEL BALL
SPACER, DETENT BALL SPRG
SCREW, CROSSBAR RETAINER
INNER CROSSBAR WELDMENT, 6500
PIVOT PIN WELDMENT, 6500 W/CNTR BORE
VI-
Section VI - PARTS (cont'd)
FORMULA IIT UNDERLIFT HYDRAULICS
VI-10
Section VI - PARTS (cont'd)
FORMULA IIT UNDERLIFT HYDRAULICS
REF.
NO.
NO.
REQ'D
PART
NUMBER
DESCRIPTION
--
1
2
3
4
--
6
1
1
5
0903296
0300044
0301883
0302881
0302926
KIT, SOLENOID VALVE FIIT
FITTING, CONNECTOR 6MJ-8MB
SOLENOID VALVE
HOSE ASSEMBLY, 45"
HOSE ASSEMBLY, 29"
--
5
6
7
8
--
6
6
1
1
0904267
0300044
0301781
0302798
0303093
VALVE ASSEMBLY, MOTOR SPOOL
FITTING, CONNECTOR 6MJ-8MB
FITTING, SWV NUT RUN TEE 3/8" JIC
VALVE, 3 SPOOL
VALVE, 4 SPOOL PARKER
--
9
10
--
2
1
0904630
0301522
0303065
INNER BOOM ASSEMBLY, FII/T
FITTING, CONNECTOR 6MJ-6MB
CYL HYD EXT F6500 W/L
--
11
12
13
14
15
16
17
--
2
2
2
2
2
4
2
0907389
0301377
0301485
0301581
0301620
0301964
0302881
0307117
W/L ASSEMBLY - FII/T
FITTING, TEE 3/8" JIC
HOSE ASSEMBLY, 81"
HOSE ASSEMBLY, 119"
FITTING, HYD 6MJ-6MB
HOSE ASSEMBLY, 65"
HOSE ASSEMBLY, 45"
CYLINDER, HYD TILT FIII
--
19
20
--
2
1
0904632
0301620
0303884
LIFT CYLINDER ASSEMBLY
FITTING, HYD 6MJ-6MB
CYLINDER, HYD LIFT FII
VI-11
Section VI - PARTS (cont'd)
OUTER CROSSTUBES & LIFT ADAPTERS
VI-12
Section VI - PARTS (cont'd)
OUTER CROSSTUBES & LIFT ADAPTERS
REF.
NO.
NO.
REQ'D
PART
NUMBER
DESCRIPTION
--
1
2
3
4
5
--
2
2
3
2
2
0904854
0301681
0301682
0500241
0500562
BA0603
CROSSBAR & RESTRAINT ASSEMBLY
TIRE RESTRAINT BELT EXT
TIRE RESTRAINT ASSEMBLY
DECAL-SAFETY CHAIN WARN
DECAL-CHAIN ATTACHMENT
HOOK, RATCHET
--
6
7
--
1
1
0903475
0500741
0802606
RESTRAINT, TIRE & DECAL LH
DECAL, RATING 6000 LB. L-ARM
TIRE RESTRAINT, MEDIUM
--
8
9
--
1
1
0903481
0500741
0802606
RESTRAINT, TIRE & DECAL RH
DECAL, RATING 6000 LB. L-ARM
TIRE RESTRAINT, MEDIUM
--
10
11
12
13
14
15
--
1
1
1
1
1
1
0904690
0300113
0301417
0306564
0500241
0706688
0803877
SLIDE-IN, LT OUTER CROSSTUBE
GREASE FITTING, ALEMITE
SPRING, PLNG PIN, CROSSBAR FI
ALUMINUM T HANDLE, 5/8" X 1-1/4"
DECAL, SAFETY CHAIN WARNING
PIN, PLUNGER
OUTER CROSSTUBE, LH
--
16
17
18
19
20
--
1
1
1
1
1
0904252
0300341
0400393
0400560
0400598
0802069
HANDLE ASSEMBLY, LEFT
KNOB, W/L CROSSBAR CONTROL
3/8"-16 HEX NUT JAM
5/32" X 1" ROLL PIN
3/16" X 1-5/8" ROLL PIN
HANDLE, PLUNGER PIN
VI-13
Section VI - PARTS (cont'd)
OUTER CROSSTUBES & LIFT ADAPTERS
(cont'd)
VI-14
Section VI - PARTS (cont'd)
OUTER CROSSTUBES & LIFT ADAPTERS
(cont'd)
REF.
NO.
NO.
REQ'D
PART
NUMBER
DESCRIPTION
--
21
22
23
24
25
26
--
1
1
1
1
1
1
0904691
0300113
0301417
0306564
0500241
0706688
0803878
SLIDE-IN RT OUTER CROSSTUBE
GREASE FITTING, ALEMITE
SPRING, PLNG PIN, CROSSBAR FI
ALUMINUM T HANDLE, 5/8" X 1-1/4"
DECAL, SAFETY CHAIN WARNING
PIN, PLUNGER
OUTER CROSSTUBE, RH
--
27
28
29
30
31
--
1
1
1
1
1
0904253
0300341
0400393
0400560
0400598
0802069
HANDLE ASSEMBLY, RIGHT
KNOB, W/L CROSSBAR CONTROL
3/8"-16 HEX NUT JAM
5/32" X 1" ROLL PIN
3/16" X 1-5/8" ROLL PIN
HANDLE, PLUNGER PIN
--
32
33
34
35
36
37
--
2
2
2
2
2
2
0900719
0200018
0200020
0200022
0306564
0500241
0804197
FORK, LIFT & ADAPT PKG
FORK, SHORT, 3" OPNG
FORK, MED, 3" OPNG
FORK, LONG, 3" OPNG
ALUM T HANDLE, 5/8" X 1-1/4"
DECAL, SAFETY CHAIN WARNING
ADAPTER, LIFT FORK 3 1/2"
VI-15
Section VI - PARTS (cont'd)
614 WRECKER ASSEMBLY
VI-16
Section VI - PARTS (cont'd)
614 WRECKER ASSEMBLY
REF.
NO.
NO.
REQ'D
PART
NUMBER
DESCRIPTION
--
1
2
3
3*
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
--
2
3
1
1
1
1
3
12
3
12
12
1
1
1
1
1
1
9
9
9
0906544
0300113
0301334
0303885
0307263
0306828
0306829
0400133
0400253
0400392
0400421
0400506
0703097
0703194
0705487
0712956
0801510
0805869
0400264
0400421
0400506
WRECKER ASSEMBLY - 614
GREASE FITTING, ALEMITE
CATERPILLER GROMMET, 1/2" (Not Shown)
CYL HYD LIFT, 614
CYL HYD LIFT (SERIAL NO. 446I02 & AFTER)
WINCH, LEFT DP 15K
WINCH, RIGHT DP 15K
3/8"-16 X 3" HHCS GR5
5/8"-11 X 1-3/4" HHCS GR5
3/8"-16 NYLOK HEX NUT
5/8"-11 NYLOK HEX NUT
5/8" FLATWASHER
PIN, LIFT CYL PIVOT
TRIM, FLEXIBLE (Not Shown)
SHAFT, BOOM PIVOT
PIN, LIFT CYL
DIP STICK WELDMENT
WRECKER FRAME WELDMENT - 614 W/15K
SCREW, 5/8"-11 X 2-1/4" HEX HD CAP GR5
NUT, 5/8"-11 NYLOK HEX
WASHER, 5/8" FLAT
--
20
21
22
23
24
25
26
27
28
29
30
31
--
4
5
2
2
1
4
4
1
1
1
1
1
0906543
0300110
0300113
0301397
0301582
0301755
0400059
0400452
0705484
0714180
0714181
0804010
0805886
BOOM ASSEMBLY - 614
SNAP RING, 1"
GREASE FITTING, ALEMITE
GREASE FITTING - 90 DEG
SLIDE PAD
CYL HYD, EXT
1/4"-20 X 5/8" HHCS GR5
1/4" HELICAL LOCKWASHER
PAD RETAINER, BOLT-ON
PIN, EXT CYL BASE
PIN, EXT CYL ROD
OUTER BOOM WELDMENT - 614
INNER BOOM WELDMENT - 614
32
2
0904171
BOOM END SWIVEL ASSEMBLY
33
2
0302848
WIRE ROPE, 1/2" X 6 X 37 IWRC (NOT SHOWN)
VI-17
Section VI - PARTS (cont'd)
614 WRECKER HYDRAULICS
VI-18
Section VI - PARTS (cont'd)
614 WRECKER HYDRAULICS
REF.
NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
NO.
REQ'D
PART
NUMBER
4
4
2
1
4
2
2
1
1
1
1
2
2
1
1
1
1
1
1
1
0300041
0300044
0300142
0300147
0300787
0301388
0301620
0301470
0301755
0301964
0301965
0302508
0301664
0302798
0303017
0303093
0303761
0307263
0306828
0306829
FITTING, CONNECTOR 8MJ-8MB
FITTING, HYD CONNECTOR 6MJ-8MB
FITTING, ELBOW 6MJ-4MP90
FITTING, ELBOW STREET 4MP-4FP90
HOSE ASSEMBLY, 53" LG
FITTING, ELL, 8MJ - 8MB90
FITTING, CONNECTOR
FITTING, ELB 6MJ-8MB90
CYL HYD, EXT
HOSE ASSEMBLY, 65"
HOSE ASSEMBLY, 131"
FITTING, ELL 8MJ-8MB 90LL
HOSE ASSEMBLY, 64"
VALVE, 3 SPOOL
FITTING, CONNECTOR
VALVE, 4 SPOOL PARKER
FITTING, ELBOW 6MJ-6MB90LL
CYL HYD LIFT, 614
WINCH, LEFT DP 15K
WINCH, RIGHT DP 15K
DESCRIPTION
VI-19
Section VI - PARTS (cont'd)
CONTROL & CROSSROD ASSEMBLY
VI-20
Section VI - PARTS (cont'd)
CONTROL & CROSSROD ASSEMBLY
REF.
NO.
NO.
REQ'D
PART
NUMBER
DESCRIPTION
--
1
2
3
4
5
6
--
4
2
2
2
2
2
0901425
0300834
0300835
0300837
0302856
0302917
0302967
KIT, CONTROL KNOB (DUAL)
KNOB, CABLE (IN-OUT)
KNOB, BOOM (UP-DOWN)
KNOB, -BOOM (IN-OUT)
KNOB, W/L TILT (UP-DOWN)
KNOB, W/L (IN-OUT)
KNOB, W/L LIFT (UP-DOWN)
--
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
--
21
6
6
14
7
21
6
7
14
7
7
1
2
14
4
3
7
2
3
2
0904222
0300122
0400066
0400370
0400390
0400392
0400393
0400452
0400527
0400542
0400543
0701099
0703501
0704517
0705494
0713483
0713484
0800604
0803675
0803676
0803677
KIT, CONTROL (DUAL)
GROMMET, SPLIT PLASTIC
1/4"-20 X 3/4" HHCS GR5 ZP
1/4" “U” TYPE TINNERMAN
3/8"-16 HEX JAM NUT
3/8"-16 NYLOK HEX NUT ZP
3/8"-16 HEX NUT JAM ZP
1/4" HELICAL LOCKWASHER ZP
5/16" X 5/8" CLEVIS PIN
3/16" X 1-1/4"COTTER PIN SS
1/8" X 3/4" COTTER PIN
ROD, CONTROL
ANGLE, CROSS CONTROL
CHANNEL, CROSSROD BEARING
LEVER, CONTROL
CROSSROD, WRECKER FI
CROSSROD, WHEEL LIFT FI
ARM, CONTROL
ROD, SHIFTER WELDMENT
ROD, SHIFTER WELDMENT
ROD, SHIFTER WELDMENT
VI-21
Section VI - PARTS (cont'd)
PUMP, VALVE & FILTER HYDRAULICS
VI-22
Section VI - PARTS (cont'd)
PUMP, VALVE & FILTER HYDRAULICS
REF.
NO.
NO.
REQ'D
PART
NUMBER
DESCRIPTION
1
2
3
4
5
6
7
8
9
4
4
2
2
2
3
6
28
1
0300055
0300071
0300136
0300288
0300660
0301334
0301674
0302756
0303867
HOSE BARB, 12C4-12MP
CLAMP, HOSE 1"
RETURN LINE FILTER ASSEMBLY
STREET ELBOW, 3/4" 90°
HOSE ASSEMBLY, 120"
CATERPILLER GROMMET, 1/2"
HOSE, 3/4" RETURN GATES RAW MAT
SUCTION HOSE, 1-1/4" ID
PUMP, BI-ROTATIONAL
--
10
11
12
--
2
1
2
0903296
0300041
0301883
0302610
KIT, SOLENOID VALVE FIIIT
FITTING, CONNECTOR 6MJ-8MB
SOLENOID VALVE
HOSE ASSEMBLY, 36"
--
13
14
15
16
17
18
--
2
1
2
1
1
1
0904267
0301375
0301388
0301547
0301780
0302798
0303093
VALVE ASSEMBLY, MOTOR SPOOL
FITTING, ELBOW 12MB-12FP90
FITTING, ELBOW 8MJ-8MB90
FITTING, ELBOW 8MJ-12MB90
FITTING, CONNECTOR 8MJ-12MB
VALVE, 3 SPOOL
VALVE, 4 SPOOL PARKER
--
19
20
21
22
23
24
25
--
2
1
2
2
2
2
2
0904543
0300364
0300446
0300891
0302088
0302698
0302983
0303463
KIT, SUCTION LINE FITTINGS
HOSE CLAMP, 1" - 2-1/4"
3/4" NPT PIPE PLUG, MALE
PIPE NIPPLE, 1-1/2" X 3"
BALL VALVE
FITTING, HOSE BARB, 1-1/4"
PIPE, ELBOW, STREET 1-1/2"
BUSHING, 1-1/2" MP- 1-1/4" FP
VI-23
Section VI - PARTS (cont'd)
PUMP, VALVE & FILTER HYDRAULICS (cont'd)
VI-24
Section VI - PARTS (cont'd)
PUMP, VALVE & FILTER HYDRAULICS (cont'd)
REF.
NO.
NO.
REQ'D
PART
NUMBER
DESCRIPTION
--
26
27
28
29
30
31
32
--
4
2
2
2
2
4
4
0904545
0300364
0301547
0302906
0303864
0303865
0400181
0400491
KIT, PUMP FITTINGS
HOSE CLAMP, 1" - 2-1/4"
FITTING, ELBOW 8MJ-12MB90
FITTING, ADAPTER 16MB-12FB
HOSE BARB, 20C4-20FJX
FITTING, ELBOW, 20MJ-16MB90
1/2"-13 X 1-1/2" HHCS GR5 ZP
1/2" HELICAL LOCKWASHER ZP
--
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
--
4
1
5
1
1
1
1
1
1
2
2
4
2
2
4
2
2
1
1
0904755
0300132
0300286
0301721
0301866
0301897
0301909
0302558
0302650
0303859
0400083
0400114
0400126
0400367
0400382
0400392
0400463
0400566
0701757
0707231
IN CAB / REMOTE CONTROL (NOT SHOWN)
CABLE TIE T120R BLK
FITTING, HP CARRY-OVER
CLAMP WIRE, TINNERMAN
SWITCH BOX, IN CAB - DT
HARNESS, GROUND
RECEPTACLE BOOT
HAND CONTROL ASSEMBLY
HARNESS, WIRING
HARNESS, WIRING
1/4"-20 X 1-1/4" RD HD SLT SCR
5/16"-18 X 3" HHCS GR5 ZP
3/8"-16 X 1" HHCS GR5 ZP
1/4"-20 NYLOK HEX NUT ZP
5/16"-18 NYLOK HEX NUT ZP
3/8"-16 NYLOK HEX NUT ZP
5/16" FLATWASHER ZP
1/4" RIVET AD810BS
PLATE, SWITCH PANEL
PLATE, GASKET MOUNTING
VI-25
Section VI - PARTS (cont'd)
HYDRAULIC CYLINDERS
REF.
NO.
NO.
REQ'D
PART
NUMBER
DESCRIPTION
1
--
1
--
0301755
0300624
CYL HYD, EXT 614
SEAL KIT, CYL HYD, EXT 614
2
--
1
--
0303065
0304506
CYL HYD EXT F6500 W/L
SEAL KIT, CYL HYD EXT F6500 W/L
3
--
1
--
0307117
0304692
CYL HYD TILT FIII
SEAL KIT, CYL HYD TILT FIII
4
--
1
--
0303884
0304624
CYL HYD LIFT, FII
SEAL KIT, CYL HYD LIFT, FII
5
--
1
--
0307263
0304715
CYL HYD LIFT, 614
SEAL KIT, CYL HYD LIFT, 614
VI-26
Section VI - PARTS (cont'd)
BOOM END SWIVEL ASSEMBLY
REF.
NO.
NO.
REQ'D
PART
NUMBER
DESCRIPTION
--
1
2
3
4
5
6
7
8
9
10
--
1
1
1
1
1
1
4
1
1
1
0904171
0301814
0300022
0300113
0400060
0400452
0700032
0700166
0712974
0803650
0900668
SWIVEL ASSEMBLY, BOOM END
3-1/2" EXT RETAINING RING
SHEAVE, 6" COMPLETE
GREASE FITTING, ALEMITE
1/4"-20 X 1/2" HHCS GR5 ZP
1/4" HELICAL LOCKWASHER ZP
RETAINER, SHEAVE SHAFT
WASHER, SPACER
SHAFT, SHEAVE
SWIVEL, BOOM END
GUIDE ASSEMBLY, CABLE U
--
11
12
13
14
--
1
2
2
1
0900668
0301531
0400392
0400393
0702285
GUIDE ASSEMBLY, CABLE U
U BOLT, 3/8"
3/8"-16 NYLOK HEX NUT ZP
3/8"-16 HEX NUT JAM ZP
BODY, CABLE GUIDE
VI-27
Section VI - PARTS (cont'd)
HARDWARE & ELECTRICAL KITS
REF.
NO.
NO.
REQ'D
PART
NUMBER
DESCRIPTION
--
--
8
1
1
0907555
0400002
0501425
0501201
BASIC UNIT 614
4X1/4 DRIVE SCREW RD HD
SERIAL NO. & DATA PLATE 614
SERIAL NO. & DATA PLATE FII/T
--
--
3
2
2
1
0907556
0300132
0301533
0500241
0501155
SHIP KIT 614
CABLE TIE
TIE DOWN STRAP
DECAL, SAFETY CHAIN WARNING
DECAL, DANGER FOR W/L ASSY'S
--
--
1
6
1
1
2
1
1
1
2
0908807
0300076
0300132
0300273
0300442
0301958
0302318
0303226
0500927
0501167
PREPACK, 614
LICENSE PLATE BRACKET (LT0117)
CABLE TIE, T120R BLK 15-1/4"
LICENSE PLATE ILLUMINATOR
LIGHT, 3 BAR (9025006)
SKUFF PAD, SAFETY CHAIN
SAFETY VIDEO
80 AMP CIRCUIT BREAKER
INSTR-PAINTING
CENTURY NAMEPLATE
--
--
2
6
0.25
1
2
2
1
0903069
0300077
0300153
0301812
0303061
0400057
0400367
0500676
KIT, BACKUP ALARM
WIRE, 16 GA, RED"
CONNECTOR, WIRE (BLUE 7520)
HEAT SHRINK TUBE - IN.MELT (BLACK)
BACKUP ALARM, ECCO MS97
1/4"-20 X 1.25" HHCS
1/4"-20 NYLOK HEX NUT ZP
INSTR. INSTL. BACKUP ALARM
--
--
2
2
2
LT0117K
0400061
0400366
0400452
KIT, HARDWARE LICENSE PLATE MTG.
1/4"-20 X 3/4" MACH SCREW
1/4"-20 HEX NUT ZP
1/4" HELICAL LOCKWASHER ZP
VI-28
Section VI - PARTS (cont'd)
HARDWARE & ELECTRICAL KITS
REF.
NO.
NO.
REQ'D
PART
NUMBER
--
--
2
10
4
10
2
40
1
2
3
2 FT.
.333 FT.
4
2
4
2
22
0903204
GH246
0300134
0300153
0300188
0301503
0301601
0301671
0301800
0302380
0303178
0303179
0400035
0400043
0400070
0400358
0400367
KIT, HARDWARE WIRING
SPLIT RUBBER GROMMET
CLAMP, 1" HOSE INSULATED
CONNECTOR, WIRE
CLAMP, 1-1/2" HOSE
#10 RING CONNECTOR 10-12 GA
CLAMP, 5/8" HOSE INSULATED
TOW LIGHT SOCKET
JUNCTION BOX (GRAY) 6 POLE
RELAY, SEALED & SKIRTED
HEAT SHRINK, 1/4"
HEAT SHRINK, 1"
10-24 X 1/2" OVAL HD SS
10-24 X 1" OVAL PHIL HD MACH
1/4"-20 X 1" HHCS GR5 ZP
10-24 HEX LOCKNUT METAL
1/4"-20 NYLOK HEX NUT ZP
--
--
14
10
40 FT.
40 FT.
2
1 FT.
20
4
8
2
1
1
20
4
0903201
HD0942
0300153
0301940
0302495
0302750
0303178
0400021
0400062
0400452
5823037
6223002
6223003
9022076
9032053
KIT, WIRING
CLAMP, 1/2" WIRE LOOM
CONNECTOR, WIRE
WIRE, 12 GA ORANGE
CONVOLUTED LOOM, 1/4"
HARNESS, GROUND CABLE
HEAT SHRINK, 1/4"
8-32 X 1/2" RD HD PH MACH SCR SS
1/4"-20 X 3/4" THRD CUT HEX
1/4" HELICAL LOCKWASHER ZP
JUNCTION BOX GROUND WIRE
HARNESS, BODY, 84CA GSA
HARNESS, 4 WAY, GSA SWRK
RING TERM, 14-16 GA 10 ST
RUBBER GROMMET
DESCRIPTION
VI-29
NOTES
NOTES
CENTURY®
Miller Industries Towing Equipment Inc.
8503 Hilltop Drive • Ooltewah, Tennessee 37363 • (423) 238-4171
www.millerind.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement