datasheet for 12V12MM578N5VC51 by Elma Electronic

VITA-Based System Platforms

VME, VME64x, VPX, VXS, VXI, and more

Elma Electronic

•

www.elma.com

TYPE 12

BACKPLANES

ACCESSORIES

SYSTEM COMPONENTS

INTEGRATION SERVICES

TEST & VALIDATION

SERVICES

Elma Electronic Inc.

WHO IS ELMA ELECTRONIC

Founded in 1962, Elma is a leading global manufacturer and supplier of products used in integrated embedded platforms for military/aerospace, communications, medical imaging, and industrial applications. Based in Fremont, California and

Wetzikon, Switzerland, the company has facilities and representatives in over 24 countries. Elma has a broad base of customers in diverse industries such as military and defense, telecommunications, industrial control, and medical electronics.

The Elma group of companies’ products and services range from electromechanical components, to boards, to complete standard or custom system platforms. Elma constantly strives to provide products designed to be superior in quality, reliability, performance, and innovation. The focus is to leverage proven technology based on VITA (VME, VPX, and VXS), PICMG standard architectures (CPCI, ATCA and MicroTCA) and rugged

COTS based solutions.

The company offers fast, flexible response to customer needs and extensive practical knowledge in tailoring solutions to specific applications. The combined Elma Team has the knowledge and resources critical to address the increasing complexity and interplay between backplane, packaging, board level and software aspects of a successfully integrated System Solution. The addition of the ACT/Technico brand of products and services strengthens Elma‘s position as a vertically integrated supplier for

Embedded Computing customers, while the Bustronic division provides unsurpassed high end backplane design expertise.

Elma’s product line encompasses well over 16,000 parts, including system packaging and boards, enclosures, backplanes, cabinets, and other electro-mechanical components. Elma’s quality level is reached through training of all employees and following of systematic procedures per ISO 9001 standards, to which Elma has been certified.

WHY CHOOSE ELMA

Flexibility | Elma tailors solutions to individual applications to ensure fast and cost-effective results.

Experience | Extensive practical experience in packaging electronic systems is used to minimize the time taken to develop new customized solutions without compromising system performance or reliability.

Compatibility | Because the two key electromechanical components - enclosures and backplanes - are made in-house,

Elma guarantees compatibility, consistency and reliability.

Global Resources | With manufacturing in Europe, Asia and the USA, customers benefit from local service backed by global resources.

ELMA PRODUCT DIVISIONS

Systems

Embedded Computing Products

Backplanes

Enclosures & Components

Cabinets

Switches, Knobs & LEDs

1

HOW ELMA DOES IT - CORE CAPABILITIES

The company supplies a first class offering of products for standard and rugged COTS electronics packaging and sub-systems integration: boards, chassis, backplanes, mechanical components, cabinets, and LED/ switches for a wide variety of applications worldwide. The ACT/Technico branded products and services enable Elma to be a leading supplier of integrated embedded boards and sub-systems built on open standards platforms, including Single Board Computers, mass storage and RAID products, I/O and networking solutions,

RTOS, Linux or Windows, and device drivers.

System architecture, hardware, and software design services are offered to quickly deliver complete solutions and expedite time to market. We take true COTS products, such as single board computers and PMCs, then enhance and qualify them to meet your rugged requirements.

This extensive range of products and services gives Elma Electronic Inc. a unique ability to complete entire projects from initial system architecture through specification, design, manufacturing and test.

Elma has a professional sales team committed to the value added sale. Our sales staff and application engineers are able to match requirements to the application and recommend semi or full custom solutions when appropriate. Our staff of experienced electrical, software, mechanical and system engineers combine to provide state of the art solutions designed to meet our customers’ specifications. We support those products long after shipment with warranty coverage and complete documentation packages.

In house manufacturing capability rounds out our ability to integrate the products and designs into a complete, shippable solution. Our Quality department rigorously maintains our corporate commitment to ship products that are built with quality workmanship.

Elma is capable of quickly turning projects from initial system architecture through to specification, design, manufacturing and test. We also work with you to manage the entire project including EOL issues, spares inventory and lifecycle management.

TECHNICAL CAPABILITIES

• Standard and rugged COTS integration and

• test expertise

System platform architecture design and

•

•

•

•

•

•

•

development

• Hardware and software selection

Chassis platform design and selection

Embedded and COTS system integration

High performance cable assemblies

Manufacturing

Run rates from 10s to low 1000s

Project management

Full support for the project, single point of contact

•

•

•

•

•

•

•

•

•

Software installation

Bootable device drivers included as needed

Device driver development

Functionally tested in hardware matching target system

Testing

Factory test software

System level/payload testing

SBCs, I/O, storage, operating system

Unit level environmental testing

ESS, NEBS, MIL-STDs 167, 810, 901D

Regulatory compliance testing CE, UL, FCC

CUSTOM SOLUTIONS

Customization is the standard at Elma Electronic. With an extensive offering of modular products as a foundation, Elma is able to leverage existing solutions and proven design concepts to meet any custom application. This approach ensures that Elma will provide a quality, compliant solution with significantly reduced lead time, cost and risk. Elma leads the industry in modifying standard VITA based backplanes and chassis to meet customers’ exact needs.

2

VITA (VMEbus International Trade Association)

VMEbus Products:

■

System Platforms

■

Backplanes

■

Extender Boards

■

Jumper Boards

■

Form Factor Adapters

■

Power Supplies

■

Voltage & Systems Monitors

■

Load Cards

Elma has been involved with the VITA standards since its inception and is committed to bringing the best technical expertise and products to the VITA community. This background information will provide a brief overview of the evolution of standard VME to the latest fabric architectures of VXS and VPX™.

VMEbus

The VME (Versa Module Eurocard) defines an electrical interface system used to interconnect data processing, storage, and other peripheral control devices in a closely coupled hardware configuration. Our goal is to ensure that every VME or VITA-based product we manufacture fulfills or exceeds the standards. Elma’s specification, innovations, market-driven product line, and services are guaranteed for their consistency and excellence.

The VMEbus evolved from Motorola’s VERSAbus. VERSAbus was a bus structure originally designed to allow the interconnection of various printed-circuit cards. Designed to fit the Eurocard form factor, the VERSAbus quickly became a standard in Europe. In 1981, Motorola, in collaboration with Mostek, Signetics/Philips, and

Thompson CSF of France, announced the new VMEbus as a nonproprietary standard in the public domain.

The VMEbus mechanical assembly specifications are based on DIN 41 495, Part 5 and IEC 297-3. VMEbus boards come in two sizes - 100 x 160mm (3U) Eurocard or 233.35 x 160mm (6U) Double Eurocard. The depth of each is 160mm; their heights are 3U and 6U. The backplane pitch is 0.8”.

The VMEbus specification describes the 6U subrack divided into two parts. The upper portion is designated as J1/P1 and the lower portion, J2/P2. The initial J1 system bus backplane was designed, using a 96-pin

DIN connector, as a complete 16-bit system, where all 96 pins are allocated. The J2 backplane in the lower part of the subrack expanded the system to 32-bits, where only the middle row pins were allocaated, leaving room for User I/O expansion.

The VMEbus has successfully evolved over the years to meet industry and market expectations. The VME64x standard (VITA 1.1-1997) added even more capabilities such as:

• 160 pin connector family

• 95 pin P0/J0 connector

• +3.3V power supply pins

• More +5 VDC power pins

• Geographical addressing

• Higher bandwidth cycles (up to 160 MB/sec)

• 141 more user defined pins

• IEEE 1101.11 compliant rear plug-in units (Transition modules)

• Live insertion/Hot Swap capability

4

VITA (VMEbus International Trade Association)

• Injector/Ejector locking handles (IEEE 1101.10)

• EMC front panels (IEEE 1101.10)

• ESD features (IEEE 1101.10)

This specification laid the groundwork for High Availability and Live Insertion (Hot Swap) VME standards, then on to increased bandwidths up to 320MB/sec. All old legacy boards that comply with IEEE-1014-1987 are considered to be VME64 compliant and are identified as VME64 compatible. All these new boards work in conjunction with the old legacy boards providing a smooth upgrade path for system integrators. Thus the VMEbus continues to grow and support diverse applications such as industrial automation and controls, defense, telecom, medical and instrumentation.

VXIbus

The VXIbus specification was created in 1987 specifically for instrumentation systems. The main sizes for VXI are “C” (6U x 340mm) and “D” (9U x 340mm) and the backplane pitch is 1.2mm.

VXS

In 2004, the VITA 41 architecture was created. VXS (VITA 41.x) adds a high-speed MultiGig connector over

P0 of a VME64x backplane for serial data traffic. The same style of connector is also used for switch slots, driving the centralized fabric signals. VXS is backwards-compatible to VME. Designers have the flexibility of plugging in standard VME64x cards for parallel bus only, integrate the payload and switch cards for parallel bus and switch fabric transport, or switch fabric transport only. The VXS specification allows for four differential serial pairs per direction link over P0, and supports up to two such ports on each VMEbus card. The result is theoretical slot-to-slot bandwidth of 3 Gb/s.

VPX, OpenVPX, and VPX REDI

VPX (VITA 46/48), ratified in 2006, uses the same connector as the P0 on VXS but along the entire board.

The specification allows for the use of VME however does not require it. 6U VPX utilizes a mesh topology for high connectivity and performance. Hybrid VPX backplanes can incorporate the VMEbus signals for slots going to legacy VME64x slots. 3U VPX typically has a twisted pair routing topology to accommodate User I/O.

The VPX Gigabit Ethernet Control Plane per VITA 46.20 provides a separate star or dual star network for outof-band communication. VPX in the mesh format offers a theoretical slot-to-slot bandwidth of 5 GB/s.

The OpenVPX (VITA 65) System specification was created to bring versatile system architectural solutions to the VPX market. Based on the extremely flexible VPX family of standards, the OpenVPX standard uses module mechanical, connectors, thermal, communications protocols, utility, and power definitions provided by specific VPX standards and then describes a series of standard profiles that define slots, backplanes, modules, and Standard Development Chassis.

VPX REDI (VITA 48), was created to define a set of thermal cooling schemes for the VPX family of products. It also introduces a new 2-level maintenance definition for VPX systems.

In keeping with our commitment to provide reliable and consistent products, Elma is proud to offer an extensive line of VITA-based products and services. We invite you to explore this catalog and contact us for more information.

5

Elma Electronic I www.elma.com

VITA System 12 Enclosure Overview

FEATURES:

■

19” Rackmount, alodined aluminum

■

Sizes 2U - 15U high

■

3 to 21 slot backplanes

■

Mounting for 3U or 6U cards 160mm - 400mm

VITA-Based System Platforms ( VME, VME64x, VPX, VXS, VXI)

■

EMC Gaskets for superior shielding

■

Vibration resistant

■

Designed to meet UL, CE and FCC requirements

■

Vertical or horizontal card mounting

■

Rear I/O optional

■

Wide range of EMC shield peripheral modules

■

100 watt - 2000 watt power supplies

■

AC or DC input

■

System Monitoring

Elma System 12 family of enclosures provides a high quality, modular platform for packaging rackmount

VITA System applications. Designed to Eurocard and IEEE standards, System 12 Enclosures give advanced

EMC shielding protection and are available with a wide range of options. Based on a modular packaging approach, the system can be configured by selecting the backplane, PSU, device modules and the number of slots. Engineered for superior cooling the System 12 is available with either front to rear or bottom to top airflow. Standard heights are 2U-12U with custom sizes possible. The System 12 will accept 3U, 6U or 9U cards mounted vertically or horizontally. Systems can be configured with or without rear I/O card cage.

Figure 1: Example of Level 1 shielding, gasketing and panel construction.

21



Measurements of Shielding Effectiveness on Type 12

Basic Level 0

Type 12 Subrack with standard front panels

(cover plates perforated or unperforated)

Level 1

Type 12 Subrack with EMC front panels

(cover plates unperforated)

Level 2

Type 12 Subrack with EMC front panels and gasket kit

(cover plates unperforated)

Typical shielding effectiveness in dB

100

90

80

70

60

50

40

H-Field

30

20

10

0

9k 20k 50k 100k 200k 500k 1M 2M 5M 10M 20M 30M

Frequency in Hz


100

90

80

70

60

50

40

30

20

10

0

9k 20k 50k 100k 200k 500k 1M 2M 5M 10M 20M 30M

Frequency in Hz


100

90

80

H-Field

70

60

50

40

30

20

10

0

9k 20k 50k 100k 200k 500k 1M 2M 5M 10M 20M 30M

Frequency in Hz


100

90

80

70

60

50

40

30

20

10

0

10

E-Field

20 50 100 200

Frequency in MHz

500 1000

50

40

30

20

10

0

10


100

90

80

70

60

E-Field

20 50 100 200


500 1000

60

50

40

30

20


100

90

80

70

10

0

10

E-Field

20 50 100 200


500 1000

22


Shock and Vibration

The capabilities of Type 12 systems to withstand the effect of shock are primarily dependent on the electronic components, power supplies, disk and tape drives, and the computer boards. Where shock is a concern, the system needs to be evaluated for the proposed application.

In general, VITA systems with drives will withstand non-operating shocks of 10 to 15 Gs, 11 ms. without damage. Operating capabilities are typically limited by the disks to around 1 or 2 Gs. Type 12 systems have significantly better vibration resistance than other commercial and industrial systems. Heavy duty construction with rugged panels and extrusions, rigid monolithic backplanes, industrial power supplies, and optional antivibration card guides, provides a sturdy system.

The Type 12 Chassis is designed to be more rugged than the electronic modules it contains to provide the best foundation for their protection from vibration. The Random Vibration Capabilities figure below shows the vibration resistance of high quality industrial 6U VME cards and 3.5 inch Winchester drives. VITA cards meeting the highest vibration requirements typically have all components soldered in, avoid axial capacitors and other large head mounted devices, and have mezzanine cards bolted into place.

Disk drives are the most sensitive components in most systems. The capabilities shown are for a 400MB 3.5 inch top-of-the-line drive. 5.25 inch drives are generally more sensitive. When vibration is a concern, Elma can provide detailed analysis of the specific vibration environment and the capabilities of the proposed system.

1

0.6

0.4

0.2

0.1

0.06

0.04

Power Spectral

Density G

2

/Hz

0.02

0.01

0.006

0.004

0.002

0.0006

0.0004

0.0002

0.0001

1 2 4 6 10 20 40 60 100 200 400 600 1000 2000

23



FEATURED SYSTEMS

VITA System 12 Horizontal Enclosure

The System 12 Horizontal Enclosure is shielded and designed for rackmount use. It is ideal for small computers holding up to twelve cards. It is available in 5 and 7 slot versions. It easily accommodates 6U x 160mm boards. Boards are housed with a horizontal orientation. Front or rear loading options are available and the optional recessed front presents a clean appearance. Superior air-flow dynamics allows for efficient air intake at either front or side; exhaust at back or side. Drive holders are standard. The power supply is mounted behind the cards. The system enclosures are fully wired and tested prior to delivery. The system can be ordered with enhanced shielding with fingers and gaskets.

VITA System 12 Vertical Enclosure (Bottom to Top Cooling)

The System 12 Vertical Enclosure is fully shielded and designed for rackmount use. It is ideal for computers holding up to twenty-one cards. It is available in many slot versions. It easily accommodates 6U x 160mm boards. Front or rear loading options are available and the optional recessed front presents a clean appearance. High volume fans provide air flow dynamics that allow for bottom to top cooling. Drive holders are standard. The power supply is mounted behind the cards. The system enclosures are fully wired and tested prior to delivery. Overall enclosure height is 7U or 12.25”. Provision for transition card cage to mount

Motorola 6U x 100mm boards is made. The version C with a “recessed card cage” for Type 12 Enclosure is also available.

VITA System 12 Vertical Enclosure (9U)

The System 12 Vertical Enclosure is fully shielded and designed for rackmount use. It is available in 12, 15,

18, and 21 slot versions and comes with a recessed card cage. It easily accommodates 6U x 160mm boards.

Boards are housed with a vertical orientation. Front or rear loading options are available and the optional recessed front presents a clean appearance. High volume fans provide air flow dynamics that allow for bottom to top cooling. Drive holders are standard. The power supply is mounted behind the cards. The system enclosures are fully wired and tested prior to delivery. Overall enclosure is 9U high or 15.75”. Versions A,

B, C and D are available for the System 12 Vertical Enclosure.

VITA System 12 Vertical Large (6U Boards) Full Height Drives

The System 12 Vertical Enclosure is fully shielded and designed for rackmount or desktop use. It is available in

12 and 21 slot versions and comes with a recessed card cage. It easily accommodates 6U x 160mm boards.

Boards are housed with a vertical orientation. Front or rear loading options are available and the optional recessed front presents a clean appearance. High volume fans provide air flow dynamics that allow for bottom to top cooling. Drive holders are standard. The power supply is mounted behind the cards. The system enclosures are fully wired and tested prior to delivery. Overall enclosure is 12U or 21” high.

24

VITA System 12 Horizontal Enclosure (3U)

FEATURES:

■

19” Rackmount fully compliant to Eurocard and IEEE standards

■

3U x 84HP x 290mm (H x W x D)

■

6U horizontal card mounting

■

5 slot VITA-Based System Platforms ( VME, VME64x, VPX, VXS, VXI)

■

Advanced EMC shielding to meet CE and FCC

■

Cooling front to rear

■

Wide range of PSU inputs (90 - 264 VAC, 48 VDC)

■

Fixed-mount or front pluggable PSUs with redundant

hot swap options

■

System monitoring for DC voltages, fan fail and over temp

(optional)

■

Connector options: 3 Row (96 PIN),

5 Row (160 PIN), 5 Row + P0, RT-2

■

Ready to run - turnkey solution

SCOPE OF SUPPLY

High quality 19” rackmount chassis platform consisting of alodined aluminum enclosures, high performance

VITA System backplane, power supply, cooling system and AC/DC power components. Assembled, wired and tested prior to shipment.

ORDERING INFORMATION

Description

■

5.25”(H) x 17”(W) x 15.75”(D)

■

Holds 5, 6U x 160mm Cards

■

5 Slot VME

■

Holds 2 x 3.5” Devices

■

1 x 50 CFM Fan

■

150W: +5V/15A; +12V/5A; -12V/1A

Order Number

12V05MM238N4HC11

VME

Description

■

5.25”(H) x 17”(W) x 15.75”(D)

■


■

5 Slot VME64x Backplane

■

Holds 2 x 3.5” Devices

■

1 x 50 CFM Fan

■

250W: +5V/35A; +12V/18A; -12V/1A;

3.3V/38A

Order Number

12V05OP238N4HCB1

64X

25


LINE DRAWINGS

6U

D

D = 15.75”

D = 19.68”

D = 23.68”

160mm

3U

Air Flow

84HP

Front View Top View

84HP

Rear View

ENVIRONMENTAL

Operating

Temperature:

Altitude:

Humidity:

Shock:

Vibration:

Agencies:

Weight :

0°C to +50°C

6000 ft. (1,829m)

5% to 95% Non condensing

10 Gs @ 11ms

1.0 Gs @ 10 to 330 Hz

Designed to meet UL 60950, FCC, A, B, CE

Approx: 17lbs

Storage / Transit

-20°C to +70°C

50,000 ft. (15,240m)


15 Gs @ 11ms (per ASTM 0775)

1.2 Gs @ 5 to 330 Hz

3U

CUSTOM CONFIGURATIONS

❑❑ NUMBER OF SLOTS

00-21: Single BP; AY-YA: Split

Example 7 slot = 07

Example 12 + 9 = LI

❑ BP BARE BOARD

A = oVPX, 6U, 1” (VITA 65)

B = oVPX, 3U, 1” (VITA 65)

C = oVPX, 6U, .8” (VITA 65)

D = oVPX, 3U, .8” (VITA 65)

H = oVPX, 6U, 1” + .8” (VITA 65)

I = oVPX, 3U, 1”+ .8 (VITA 65)

L = VXS Dual Star

M = V64, J12 mono, 3 row

N = VME64x, 6U

O = VME64x, 7U

P = VPX, 6U (VITA 46)

W = VPX, 3U (VITA 46)

S = VXS Star

T = VXS (Mesh)

X = No BP Installed

Z = Custom

❑ BP CONNECTOR

(CONFIGURATION J1/J2/PO)

L = 5 row, RT-2 PO & SW

M = 3 row, J1 flush, J2 13mm

O = 5 row, w/o PO

P = 5 row, w/ PO

S = RT-2 (J0-J6) 6U

U = RT-2 (J0-J2) 3U

V = RT-2(J0-J6) 6U, RTM

W = RT-2 (J0-J2) 3U, RTM

X = No Connectors

Y = Hybrid

Z = Custom

❑ DRIVES

1 = 1 x 3.5”

2 = 2 x 3.5”

3 = 1 x 5.25” HH

A = 1 x 2.5”,1 x CDR (SL)

B = 2 x 2.5”

D = 1 x slim line CDROM

X = No Mounting

❑ HEIGHT

3 = 3U

❑ WIDTH

3 = 32 T

6 = 63 T

8 = 84 T

❑ REAR I/O

N = No

Y = Yes

❑ DEPTH

2 = 200mm - 299mm

3 = 300mm - 399mm

4 = 400mm - 499mm

5 = 500mm - 599mm

❑ CARD ORIENTATION

H = Horizontal

12 V ❑ ❑ ❑ ❑ ❑ 3 8 ❑ ❑ H ❑ ❑ ❑

❑ PSU INPUT

A = 110/220VAC (Plug-in)

C = 90-230VAC (Fixed)

E = 110/220VAC (2 x HS, N + 1)

G = 90-230VAC (Plug-in)

H = 48VDC (Plug-in)

K = 48VDC (Fixed)

M = 48VDC (2 x HS, N + 1)

N = 28VDC (Fixed)

O = 28VDC (2 x HS, N+1)

P = 90-230VAC (2 x HS, N + 1)

X = No PSU

❑ PSU OUTPUT

(NOT ALL PSU COMBINATIONS AVAILABLE)

1 = 100 - 199 watts (w/o 3.3V)

2 = 200 - 299 watts (w/o 3.3V)

A = 100 - 199 watts (w 3.3V)

B = 200 - 299 watts (w 3.3V)

X = Not Installed

❑ SHIELDING LEVEL

0 = Level 0

1 = Level 1

2 = Level 2

X = Not Installed

26

VITA System 12 Horizontal Enclosure (4U & 6U)

FEATURES:

■


■

4U x 84HP x 290mm (H x W x D)

■

6U horizontal card mounting

■

7 slot VITA-Based System Platforms ( VME, VME64x, VPX, VXS, VXI)

■


■


■


■

Fixed-mount or front pluggable PSUs with redundant hot

swap options

■

System monitoring for DC voltages, fan fail and

over temp (optional)

■

Connector options: 3 Row (96 PIN), 5 Row (160 PIN),

5 Row + P0, RT-2

■


SCOPE OF SUPPLY




PSU

PSU

I

O

27


Description

■

7”(H) x 17”(W) x 15.75”(D)

■


■

7 Slot VME or VME64x Backplane

■

Holds 2 x 5.25”HH Devices

■

1 x 114 CFM Fan

■

250W: +5V/40A; +12V/6A; -12V/6A;

3.3V/20A

Order Number

12V07MM448N4HC21

VME

12V07OP448N4HCB1

64X

Order Number Description

■

7”(H) x 17”(W) x 15.75”(D)

■


■

5 Slot 6U VXS Backplane

■

No Device Mounting

■

1 x 150 CFM Fan

■

500W: +5V/50A; +12V/12A; -12V/4A;

3.3V/60A

12V05LSX48N4HGE1

VXS

Description

■

7"(H) x 17”(W) x 15.75”(D)

■


■

Holds 5, 6U x 80mm RTMs (recessed)

■

5 Slot oVPX Backplane (K2P-X1)*

■

No Device Mounting

■

2 x 114 CFM Fan(s)

■

800W: +5V/120A; +12V/12A; -12V/10A; 3.3V/40A

* see Topology Graph page 108 for details

Order Number

12V05AVX68Y4HCH1

VPX

LINE DRAWINGS

6U

D

D = 15.75”

D = 19.68”

D = 23.68”

4U

160mm

Air Flow

84HP

Front View Top View

84HP

Rear View

ENVIRONMENTAL

Operating

Temperature:

Altitude:

Humidity:

Shock:

Vibration:

Agencies:

Weight :

0°C to +50°C

6000 ft. (1,829m)


10 Gs @ 11ms

1.0 Gs @ 10 to 330 Hz


Approx: 22lbs


-20°C to +70°C

50,000 ft. (15,240m)


15 Gs @ 11ms (per ASTM 0775)

1.2 Gs @ 5 to 330 Hz

4U




Example 7 slot = 07

Example 12 + 9 = LI

❑ BP BARE BOARD

A = oVPX, 6U, 1” (VITA 65)

B = oVPX, 3U, 1” (VITA 65)

C = oVPX, 6U, .8” (VITA 65)

D = oVPX, 3U, .8” (VITA 65)

H = oVPX, 6U, 1” + .8” (VITA 65)

I = oVPX, 3U, 1”+ .8 (VITA 65)

L = VXS Dual Star


N = VME64x, 6U

O = VME64x, 7U



S = VXS Star

T = VXS (Mesh)

X = No BP Installed

Z = Custom

❑ BP CONNECTOR




O = 5 row, w/o PO

P = 5 row, w/ PO

S = RT-2 (J0-J6) 6U

U = RT-2 (J0-J2) 3U

V = RT-2(J0-J6) 6U, RTM

W = RT-2 (J0-J2) 3U, RTM

X = No Connectors

Y = Hybrid

Z = Custom

❑ DRIVES

1 = 1 x 3.5”

2 = 2 x 3.5”

3 = 1 x 5.25” HH

4 = 2 x 5.25” HH

9 = 1 x 3.5”, 1 x 5.25” HH

A = 1 x 2.5”,1 x CDR (SL)

B = 2 x 2.5”


X = No Mounting

❑ HEIGHT

4 = 4U

❑ WIDTH

8 = 84 T

❑ REAR I/O

N = No

Y = Yes

❑ DEPTH

2 = 200mm - 299mm

3 = 300mm - 399mm

4 = 400mm - 499mm

5 = 500mm - 599mm

6 = 600mm - 699mm


H = Horizontal

12 V ❑ ❑ ❑ ❑ ❑ 4 8 ❑ ❑ H ❑ ❑ ❑

❑ PSU INPUT



E = 110/220VAC (2 x HS, N + 1)


H = 48VDC (Plug-in)

K = 48VDC (Fixed)

M = 48VDC (2 x HS, N + 1)

N = 28VDC (Fixed)

O = 28VDC (2 x HS, N+1)

P = 90-230VAC (2 x HS, N + 1)

X = No PSU

❑ PSU OUTPUT


2 = 200 - 299 watts (w/o 3.3V)

3 = 300 - 399 watts (w/o 3.3V)

4 = 400 - 499 watts (w/o 3.3V)

5 = 500 - 599 watts (w/o 3.3V)

B = 200 - 299 watts (w 3.3V)

C = 300 - 399 watts (w 3.3V)

D = 400 - 499 watts (w 3.3V)

E = 500 - 599 watts (w 3.3V)

X = Not Installed

❑ SHIELDING LEVEL

0 = Level 0

1 = Level 1

2 = Level 2

X = Not Installed

28

VITA System 12 Vertical Enclosure, Short (7U)

FEATURES:

■


■

7U x 84HP x 16” (H x W x D)

■

6U vertical card mounting

■

2 to 21 slot VITA-Based System Platforms ( VME, VME64x,

VPX, VXS, VXI)

■


■

Cooling bottom to top

■


■


swap options

■

System monitoring for DC voltages, fan fail and

over temp (optional)

■


5 Row (160 PIN), 5 Row + P0, RT-2

■


SCOPE OF SUPPLY


VITA System, power supply, cooling system and AC/DC power components. Assembled, wired and tested prior to shipment.


Description

■

12.25”(H) x 17”(W) x 15.75”(D)

■


■


■

4 x 5.25” HH Devices

■

2 x 114 CFM Fans, 12V DC

■

500W: +5V/80A; +12V/12A;12V/4A,

or 600W: +5V/75A; +12V/12A;

-12V/4A; 3.3V/40A

Order Number

12V12MM578N4VC51

VME

12V12OP578N4VCF1

64X

Description

■

12.25”(H) x 17”(W) x 15.75”(D)

■


■


■

No Device Mounting

■

3 x 114 CFM Fans, 12V DC

■

750W: 5V/120A; +12V/12A; -12V/10A, or 800W: +5V/120A; +12V/12A;

-12V/10A; 3.3V/40A

Order Number

12V21MMX78N4VC71

VME

12V21OPX78N4VCH1

64X

29


LINE DRAWINGS

84HP

15.75”

84HP

6U 6U

7U

1U 1U

Air Flow

Front View Rear View

ENVIRONMENTAL

Operating

Temperature:

Altitude:

Humidity:

Shock:

Vibration:

Agencies:

Weight :

0°C to +50°C

6000 ft. (1,829m)


10 Gs @ 11ms

1.0 Gs @ 10 to 330 Hz


Approx: 28lbs


-20°C to +70°C

50,000 ft. (15,240m)


15 Gs @ 11ms (per ASTM 0775)

1.2 Gs @ 5 to 330 Hz




Example 7 slot = 07

Example 12 + 9 = LI

❑ BP BARE BOARD

A = oVPX, 6U, 1” (VITA 65)

B = oVPX, 3U, 1” (VITA 65)

C = oVPX, 6U, .8” (VITA 65)

D = oVPX, 3U, .8” (VITA 65)

H = oVPX, 6U, 1” + .8” (VITA 65)

I = oVPX, 3U, 1”+ .8 (VITA 65)

L = VXS Dual Star


N = VME64x, 6U

O = VME64x, 7U



S = VXS Star

T = VXS (Mesh)

X = No BP Installed

Z = Custom

❑ BP CONNECTOR




O = 5 row, w/o PO

P = 5 row, w/ PO

S = RT-2 (J0-J6) 6U

U = RT-2 (J0-J2) 3U

V = RT-2(J0-J6) 6U, RTM

W = RT-2 (J0-J2) 3U, RTM

X = No Connectors

Y = Hybrid

Z = Custom

❑ DRIVES

1 = 1 x 3.5”

2 = 2 x 3.5”

3 = 1 x 5.25” HH

4 = 2 x 5.25” HH

5 = 4 x 5.25” HH

6 = 2 x 3.5”, 1 x 5.25” HH

7 = 1 x 3.5”, 2 x 5.25” HH

8 = 2 x 3.5”, 2 x 5.25” HH

9 = 1 x 3.5”, 1 x 5.25” HH

A = 1 x 2.5”,1 x CDR (SL)

B = 2 x 2.5”


X = No Mounting

❑ HEIGHT

7 =- 7U

❑ WIDTH

8 = 84 T

❑ REAR I/O

N = No

Y = Yes

❑ DEPTH

4 = 400mm - 499mm


V = Vertical

❑ PSU INPUT



E = 110/220VAC (2 x HS, N + 1)


H = 48VDC (Plug-in)

K = 48VDC (Fixed)

M = 48VDC (2 x HS, N + 1)

12 V ❑ ❑ ❑ ❑ ❑ 7 8 ❑ 4 V ❑ ❑ ❑

N = 28VDC (Fixed)

O = 28VDC (2 x HS, N+1)

P = 90-230VAC (2 x HS, N + 1)

X = No PSU

❑ PSU OUTPUT


1 = 100 - 199 watts (w/o 3.3V)

2 = 200 - 299 watts (w/o 3.3V)

3 = 300 - 399 watts (w/o 3.3V)

4 = 400 - 499 watts (w/o 3.3V)

5 = 500 - 599 watts (w/o 3.3V)

6 = 600 - 699 watts (w/o 3.3V)

7 = 700 - 799 watts (w/o 3.3V)

8 = 800 - 899 watts (w/o 3.3V)

9 = 900 - 999 watts (w/o 3.3V)

B = 200 - 299 watts (w 3.3V)

C = 300 - 399 watts (w 3.3V)

D = 400 - 499 watts (w 3.3V)

E = 500 - 599 watts (w 3.3V)

F = 600 - 699 watts (w 3.3V)

G = 700 - 799 watts (w 3.3V)

H = 800 - 899 watts (w 3.3V)

I = 900 - 999 watts (w 3.3V)

J = 1000 - 1099 watts (w 3.3V)

K = 1100 - 1199 watts (w 3.3V)

L = 1200 - 1299 watts (w 3.3V)

M = 1300 - 1399 watts (w 3.3V)

N = 1400 - 1499 watts (w 3.3V)

X = Not Installed

❑ SHIELDING LEVEL

0 = Level 0

1 = Level 1

2 = Level 2

X = Not Installed

30

VITA System 12 Vertical Enclosure, Long (7U)

FEATURES:

■


■

7U x 84HP x 20” (H x W x D)

■


■


VPX, VXS, VXI)

■


■

Cooling bottom to top

■


■


swap options

■


(optional)

■


5 Row (160 PIN), 5 Row + P0, RT-2

■


SCOPE OF SUPPLY


VITA System, power supply, cooling system and AC/DC power components. Assembled, wired and tested prior to shipment.


Description

■

12.25”(H) x 17”(W) x 19.68”(D)

■


■


■


■

2 x 114 CFM Fans

■

500W: +5V/80A; +12V/12A;12V/4A,

or 600W: +5V/75A; +12V/12A;

-12V/4A; 3.3V/40A

Order Number

12V12MM578N5VC51

VME

12V12OP578N5VCF1 64X

Description

■

12.25”(H) x 17”(W) x 19.68”(D)

■


■


■

No Device Mounting

■

3 x 90 CFM Fans

■

750W: 5V/120A; +12V/12A; -12V/10A, or 800W: +5V/120A; +12V/12A;

-12V/10A; 3.3V/40A

Order Number

12V21MMX78N5VC71

VME

12V21OPX78N5VCH1

64X

31


LINE DRAWINGS

84HP

19.68”

84HP

6U 6U

7U

1U 1U

Air Flow

Front View Rear View

ENVIRONMENTAL

Operating

Temperature:

Altitude:

Humidity:

Shock:

Vibration:

Agencies:

Weight :

0°C to +50°C

6000 ft. (1,829m)


10 Gs @ 11ms

1.0 Gs @ 10 to 330 Hz


Approx: 30 lbs


-20°C to +70°C

50,000 ft. (15,240m)


15 Gs @ 11ms (per ASTM 0775)

1.2 Gs @ 5 to 330 Hz




Example 7 slot = 07

Example 12 + 9 = LI

❑ BP BARE BOARD

A = oVPX, 6U, 1” (VITA 65)

B = oVPX, 3U, 1” (VITA 65)

C = oVPX, 6U, .8” (VITA 65)

D = oVPX, 3U, .8” (VITA 65)

H = oVPX, 6U, 1” + .8” (VITA 65)

I = oVPX, 3U, 1”+ .8 (VITA 65)

L = VXS Dual Star


N = VME64x, 6U

O = VME64x, 7U



S = VXS Star

T = VXS (Mesh)

X = No BP Installed

Z = Custom

❑ BP CONNECTOR




O = 5 row, w/o PO

P = 5 row, w/ PO

S = RT-2 (J0-J6) 6U

U = RT-2 (J0-J2) 3U

V = RT-2(J0-J6) 6U, RTM

W = RT-2 (J0-J2) 3U, RTM

X = No Connectors

Y = Hybrid

Z = Custom

❑ DRIVES

1 = 1 x 3.5”

2 = 2 x 3.5”

3 = 1 x 5.25” HH

4 = 2 x 5.25” HH

5 = 4 x 5.25” HH

6 = 2 x 3.5”, 1 x 5.25” HH

7 = 1 x 3.5”, 2 x 5.25” HH

8 = 2 x 3.5”, 2 x 5.25” HH

9 = 1 x 3.5”, 1 x 5.25” HH

A = 1 x 2.5”,1 x CDR (SL)

B = 2 x 2.5”


X = No Mounting

❑ HEIGHT

7 =- 7U

❑ WIDTH

3 = 32 T

6 = 63 T

8 = 84 T

❑ REAR I/O

N = No

Y = Yes

❑ DEPTH

5 = 500mm - 599mm


V = Vertical

❑ PSU INPUT



E = 110/220VAC (2 x HS, N + 1)


H = 48VDC (Plug-in)

12 V ❑ ❑ ❑ ❑ ❑ 7 8 ❑ 5 V ❑ ❑ ❑

K = 48VDC (Fixed)

M = 48VDC (2 x HS, N + 1)

N = 28VDC (Fixed)

O = 28VDC (2 x HS, N+1)

P = 90-230VAC (2 x HS, N + 1)

X = No PSU

❑ PSU OUTPUT


1 = 100 - 199 watts (w/o 3.3V)

2 = 200 - 299 watts (w/o 3.3V)

3 = 300 - 399 watts (w/o 3.3V)

4 = 400 - 499 watts (w/o 3.3V)

5 = 500 - 599 watts (w/o 3.3V)

6 = 600 - 699 watts (w/o 3.3V)

7 = 700 - 799 watts (w/o 3.3V)

8 = 800 - 899 watts (w/o 3.3V)

9 = 900 - 999 watts (w/o 3.3V)

A = 100 - 199 watts (w 3.3V)

B = 200 - 299 watts (w 3.3V)

C = 300 - 399 watts (w 3.3V)

D = 400 - 499 watts (w 3.3V)

E = 500 - 599 watts (w 3.3V)

F = 600 - 699 watts (w 3.3V)

G = 700 - 799 watts (w 3.3V)

H = 800 - 899 watts (w 3.3V)

I = 900 - 999 watts (w 3.3V)

J = 1000 - 1099 watts (w 3.3V)

K = 1100 - 1199 watts (w 3.3V)

L = 1200 - 1299 watts (w 3.3V)

M = 1300 - 1399 watts (w 3.3V)

N = 1400 - 1499 watts (w 3.3V)

X = Not Installed

❑ SHIELDING LEVEL

0 = Level 0

1 = Level 1

2 = Level 2

X = Not Installed

32

VITA System 12 Vertical Enclosure, Short (9U)

FEATURES:

■


■

9U x 84HP x 16” (H x W x D)

■

6U vertical card mounting, recessed 60mm

■

2 to 21slot VITA-Based System Platforms ( VME, VME64x,

VPX, VXS, VXI)

■


■


■


■


swap options

■


(optional)

■


5 Row (160 PIN), 5 Row + P0, RT-2

■


SCOPE OF SUPPLY




33


Description

■

15.75”(H) x 17”(W) x 15.74”(D)

■


■


■

2 x 114 CFM Fans

■


■

500W: +5V/80A; +12V/10A; -12V/10A,

or 600W: +5V/75A; +12V/12A;

-12V/4A; 3.3V/40A

Order Number

12V12MM598N4VC51

VME

12V12OP598N4VCF1

64X

Description

■

■

15.75" (H) x 17”(W) x 15.74”(D)

Holds 7, 6U x 160mm Cards (1")

■

7 Slot oVPX Backplane (K2X-N2)*

■

No Device Mounting

■

2 x 114 CFM Fan(s)

■

800W: 5V/120A; +12V/12A; -12V/10A;

3.3V/40A

Order Number

12V07ASX98N4VCH1

VPX

Description

■

15.75”(H) x 17”(W) x 15.74”(D)

■


■


■

3 x 114 CFM Fans

■

No Device Mounting

■

750W: 5V/120A; +12V/12A; -12V/10A,

or 800W: 5V/120A; +12V/12A;

-12V/10A; 3.3V/40A

Order Number

12V21MMX98N4VC71

VME

12V21OPX98N4VCH1

64X

LINE DRAWINGS

15.74”

6U x 160mm

02-21 Slot

6U x 160mm

7U

9U

6U

Air Flow

2U

84HP

Front View

84HP

Rear View

ENVIRONMENTAL

Operating

Temperature:

Altitude:

Humidity:

Shock:

Vibration:

Agencies:

Weight :

0°C to +50°C

6000 ft. (1,829m)


10 Gs @ 11ms

1.0 Gs @ 10 to 330 Hz


Approx: 33lbs


-20°C to +70°C

50,000 ft. (15,240m)


15 Gs @ 11ms (per ASTM 0775)

1.2 Gs @ 5 to 330 Hz




Example 7 slot = 07

Example 12 + 9 = LI

❑ BP BARE BOARD

A = oVPX, 6U, 1” (VITA 65)

B = oVPX, 3U, 1” (VITA 65)

C = oVPX, 6U, .8” (VITA 65)

D = oVPX, 3U, .8” (VITA 65)

H = oVPX, 6U, 1” + .8” (VITA 65)

I = oVPX, 3U, 1”+ .8 (VITA 65)

L = VXS Dual Star


N = VME64x, 6U

O = VME64x, 7U



S = VXS Star

T = VXS (Mesh)

X = No BP Installed

Z = Custom

❑ BP CONNECTOR




O = 5 row, w/o PO

P = 5 row, w/ PO

S = RT-2 (J0-J6) 6U

U = RT-2 (J0-J2) 3U

V = RT-2(J0-J6) 6U, RTM

W = RT-2 (J0-J2) 3U, RTM

X = No Connectors

Y = Hybrid

Z = Custom

❑ DRIVES

1 = 1 x 3.5”

2 = 2 x 3.5”

3 = 1 x 5.25” HH

4 = 2 x 5.25” HH

5 = 4 x 5.25” HH

6 = 2 x 3.5”, 1 x 5.25” HH

7 = 1 x 3.5”, 2 x 5.25” HH

8 = 2 x 3.5”, 2 x 5.25” HH

9 = 1 x 3.5”, 1 x 5.25” HH

A = 1 x 2.5”,1 x CDR (SL)

B = 2 x 2.5”


X = No Mounting

❑ HEIGHT

9 = 9U

❑ WIDTH

8 = 84 T

❑ REAR I/O

N = No

Y = Yes

❑ DEPTH

4 = 400mm - 499mm


V = Vertical

❑ PSU INPUT



E = 110/220VAC (2 x HS, N + 1)


H = 48VDC (Plug-in)

K = 48VDC (Fixed)

M = 48VDC (2 x HS, N + 1)

12 V ❑ ❑ ❑ ❑ ❑ 9 8 ❑ 4 V ❑ ❑ ❑

N = 28VDC (Fixed)

O = 28VDC (2 x HS, N+1)

P = 90-230VAC (2 x HS, N + 1)

X = No PSU

❑ PSU OUTPUT


1 = 100 - 199 watts (w/o 3.3V)

2 = 200 - 299 watts (w/o 3.3V)

3 = 300 - 399 watts (w/o 3.3V)

4 = 400 - 499 watts (w/o 3.3V)

5 = 500 - 599 watts (w/o 3.3V)

6 = 600 - 699 watts (w/o 3.3V)

7 = 700 - 799 watts (w/o 3.3V)

8 = 800 - 899 watts (w/o 3.3V)

9 = 900 - 999 watts (w/o 3.3V)

A = 100 - 199 watts (w 3.3V)

B = 200 - 299 watts (w 3.3V)

C = 300 - 399 watts (w 3.3V)

D = 400 - 499 watts (w 3.3V)

E = 500 - 599 watts (w 3.3V)

F = 600 - 699 watts (w 3.3V)

G = 700 - 799 watts (w 3.3V)

H = 800 - 899 watts (w 3.3V)

I = 900 - 999 watts (w 3.3V)

J = 1000 - 1099 watts (w 3.3V)

K = 1100 - 1199 watts (w 3.3V)

L = 1200 - 1299 watts (w 3.3V)

M = 1300 - 1399 watts (w 3.3V)

N = 1400 - 1499 watts (w 3.3V)

X = Not Installed

❑ SHIELDING LEVEL

0 = Level 0

1 = Level 1

2 = Level 2

X = Not Installed

34

VITA System 12 Vertical Enclosure, Long (9U)

FEATURES:

■

■


9U x 84HP x 20” (H x W x D)

■


■


VPX, VXS, VXI)

■


■


■


■


swap options

■


(optional)

■

Connector options: 3 Row (96 PIN), 5 Row (160 PIN),

5 Row + P0, RT-2

■


SCOPE OF SUPPLY




35


Description

■

15.75”(H) x 17”(W) x 19.68”(D)

■


■


■


■

2 x 100 CFM Fans

■

500W: +5V/80A; +12V/10A; -12V/10A, or 600W:

+5V/75A; +12V/12A; -12V/4A; 3.3V/40A

■

Rear I/O

Order Number

12V12MM598Y5VC51

VME

12V12OP598Y5VCF1

Description

■

15.75”(H) x 17”(W) x 19.68”(D)

■


■

12 Slot VXS Backplane

■


■

2 x 150 CFM Fans

■

800W: 5V/120A; +12V/12A; -12V/10A; 3.3V/40A

■

Rear I/O

12V12LL298Y5VCH1

64X

VXS

Description

■

15.75”(H) x 17”(W) x 19.68”(D)

■


■


■

No Device Mounting

■

3 x 100 CFM Fans

■

750W: 5V/120A; +12V/12A; -12V/10A, or 800W:

5V/120A; +12V/12A; -12V/10A; 3.3V/40A

■

Rear I/O

Order Number

12V21MMX98Y5VC71

VME

12V21OPX98Y5VCH1

64X

LINE DRAWINGS

19.68”

2U

6U x 160mm

02-21 SLOT

6U x 160mm

7U

9U

6U

6U

2U

84HP

Front View

Air Flow

Rear View

AC 1U

ENVIRONMENTAL

Operating

Temperature:

Altitude:

Humidity:

Shock:

Vibration:

Agencies:

Weight :

0°C to +50°C

6000 ft. (1,829m)


10 Gs @ 11ms

1.0 Gs @ 10 to 330 Hz


Approx: 35lbs


-20°C to +70°C

50,000 ft. (15,240m)


15 Gs @ 11ms (per ASTM 0775)

1.2 Gs @ 5 to 330 Hz




Example 7 slot = 07

Example 12 + 9 = LI

❑ BP BARE BOARD

A = oVPX, 6U, 1” (VITA 65)

B = oVPX, 3U, 1” (VITA 65)

C = oVPX, 6U, .8” (VITA 65)

D = oVPX, 3U, .8” (VITA 65)

H = oVPX, 6U, 1” + .8” (VITA 65)

I = oVPX, 3U, 1”+ .8 (VITA 65)

L = VXS Dual Star


N = VME64x, 6U

O = VME64x, 7U



S = VXS Star

T = VXS (Mesh)

X = No BP Installed

Z = Custom

❑ BP CONNECTOR




O = 5 row, w/o PO

P = 5 row, w/ PO

S = RT-2 (J0-J6) 6U

U = RT-2 (J0-J2) 3U

V = RT-2(J0-J6) 6U, RTM

W = RT-2 (J0-J2) 3U, RTM

X = No Connectors

Y = Hybrid

Z = Custom

❑ DRIVES

1 = 1 x 3.5”

2 = 2 x 3.5”

3 = 1 x 5.25” HH

4 = 2 x 5.25” HH

5 = 4 x 5.25” HH

6 = 2 x 3.5”, 1 x 5.25” HH

7 = 1 x 3.5”, 2 x 5.25” HH

8 = 2 x 3.5”, 2 x 5.25” HH

9 = 1 x 3.5”, 1 x 5.25” HH

A = 1 x 2.5”,1 x CDR (SL)

B = 2 x 2.5”


X = No Mounting

❑ HEIGHT

9 = 9U

❑ WIDTH

8 = 84 T

❑ REAR I/O

N = No

Y = Yes

❑ DEPTH

5 = 500mm - 599mm


V = Vertical

❑ PSU INPUT



E = 110/220VAC (2 x HS, N + 1)


H = 48VDC (Plug-in)

K = 48VDC (Fixed)

M = 48VDC (2 x HS, N + 1)

12 V ❑ ❑ ❑ ❑ ❑ 9 8 ❑ 5 V ❑ ❑ ❑

N = 28VDC (Fixed)

O = 28VDC (2 x HS, N+1)

P = 90-230VAC (2 x HS, N + 1)

X = No PSU

❑ PSU OUTPUT


1 = 100 - 199 watts (w/o 3.3V)

2 = 200 - 299 watts (w/o 3.3V)

3 = 300 - 399 watts (w/o 3.3V)

4 = 400 - 499 watts (w/o 3.3V)

5 = 500 - 599 watts (w/o 3.3V)

6 = 600 - 699 watts (w/o 3.3V)

7 = 700 - 799 watts (w/o 3.3V)

8 = 800 - 899 watts (w/o 3.3V)

9 = 900 - 999 watts (w/o 3.3V)

A = 100 - 199 watts (w 3.3V)

B = 200 - 299 watts (w 3.3V)

C = 300 - 399 watts (w 3.3V)

D = 400 - 499 watts (w 3.3V)

E = 500 - 599 watts (w 3.3V)

F = 600 - 699 watts (w 3.3V)

G = 700 - 799 watts (w 3.3V)

H = 800 - 899 watts (w 3.3V)

I = 900 - 999 watts (w 3.3V)

J = 1000 - 1099 watts (w 3.3V)

K = 1100 - 1199 watts (w 3.3V)

L = 1200 - 1299 watts (w 3.3V)

M = 1300 - 1399 watts (w 3.3V)

N = 1400 - 1499 watts (w 3.3V)

X = Not Installed

❑ SHIELDING LEVEL

0 = Level 0

1 = Level 1

2 = Level 2

X = Not Installed

36

VITA System 12 Vertical Enclosure (10U)

FEATURES:

■


■

10U x 84HP x 20” (H x W x D)

■


■


VPX, VXS, VXI)

■


■


■


■


swap options

■


(optional)

■


5 Row (160 PIN), 5 Row + P0, RT-2

■


SCOPE OF SUPPLY




37


Description

■

17.5” (H) x 17” (W) x 19.68”(D)

■


■


■


■

2 x 114 CFM, 12V DC Fans

■

500W: +5V/80A; +12V/10A; -12V/10A, or

600W: +5V/75A; +12V/12A; -12V/4A;

3.3V/40A

Description

■

17.5” (H) x 17” (W) x 19.68”(D)

■


■


■


■

3 x 150 CFM

■

750W: 5V/120A; +12V/12A; -12V/10A,

or 800W: 5V/120A; +12V/12A; -12V/10A;

3.3V/40A

Description

■

■

17.5" (H) x 17”(W) x 15.74”(D)


■

7 Slot oVPX Backplane (K2T-X2)*

■

No Device Mounting

■

2 x 114 CFM Fan(s)

■

800W: 5V/120A; +12V/12A; -12V/10A;

3.3V/40A

Order Number

12V12MMCA8N5VC51

VME

12V12OPCA8N5VCF1

Order Number

64X

12V21MM4A8N5VC71

VME

12V21OP4A8N5VCH1

64X

Order Number

12V07ASXA8Y5VCH1

VPX


LINE DRAWINGS

17”

19.98”

10U 10U

Air

Air Flow

Front View

84HP

Rear View

ENVIRONMENTAL

Operating

Temperature:

Altitude:

Humidity:

Shock:

Vibration:

Agencies:

Weight :

0°C to +50°C

6000 ft. (1,829m)


10 Gs @ 11ms

1.0 Gs @ 10 to 330 Hz


Approx: 34lbs


-20°C to +70°C

50,000 ft. (15,240m)


15 Gs @ 11ms (per ASTM 0775)

1.2 Gs @ 5 to 330 Hz




Example 7 slot = 07

Example 12 + 9 = LI

❑ BP BARE BOARD

A = oVPX, 6U, 1” (VITA 65)

B = oVPX, 3U, 1” (VITA 65)

C = oVPX, 6U, .8” (VITA 65)

D = oVPX, 3U, .8” (VITA 65)

H = oVPX, 6U, 1” + .8” (VITA 65)

I = oVPX, 3U, 1”+ .8 (VITA 65)

L = VXS Dual Star


N = VME64x, 6U

O = VME64x, 7U



S = VXS Star

T = VXS (Mesh)

X = No BP Installed

Z = Custom

❑ BP CONNECTOR




O = 5 row, w/o PO

P = 5 row, w/ PO

S = RT-2 (J0-J6) 6U

U = RT-2 (J0-J2) 3U

V = RT-2(J0-J6) 6U, RTM

W = RT-2 (J0-J2) 3U, RTM

X = No Connectors

Y = Hybrid

Z = Custom

12 V ❑ ❑ ❑ ❑ ❑ A 8 ❑ 5 V ❑ ❑ ❑

❑ DRIVES

1 = 1 x 3.5”

2 = 2 x 3.5”

3 = 1 x 5.25” HH

4 = 2 x 5.25” HH

5 = 4 x 5.25” HH

6 = 2 x 3.5”, 1 x 5.25” HH

7 = 1 x 3.5”, 2 x 5.25” HH

8 = 2 x 3.5”, 2 x 5.25” HH

9 = 1 x 3.5”, 1 x 5.25” HH

A = 1 x 2.5”,1 x CDR (SL)

B = 2 x 2.5”

C = 6 x 5.25” HH


X = No Mounting

❑ HEIGHT

A = 10U

❑ WIDTH

8 = 84 T

❑ REAR I/O

N = No

Y = Yes

❑ DEPTH

5 = 500mm - 599mm


V = Vertical

❑ PSU INPUT



E = 110/220VAC (2 x HS, N + 1)


H = 48VDC (Plug-in)

K = 48VDC (Fixed)

M = 48VDC (2 x HS, N + 1)

N = 28VDC (Fixed)

O = 28VDC (2 x HS, N+1)

P = 90-230VAC (2 x HS, N + 1)

X = No PSU

❑ PSU OUTPUT


1 = 100 - 199 watts (w/o 3.3V)

2 = 200 - 299 watts (w/o 3.3V)

3 = 300 - 399 watts (w/o 3.3V)

4 = 400 - 499 watts (w/o 3.3V)

5 = 500 - 599 watts (w/o 3.3V)

6 = 600 - 699 watts (w/o 3.3V)

7 = 700 - 799 watts (w/o 3.3V)

8 = 800 - 899 watts (w/o 3.3V)

9 = 900 - 999 watts (w/o 3.3V)

A = 100 - 199 watts (w 3.3V)

B = 200 - 299 watts (w 3.3V)

C = 300 - 399 watts (w 3.3V)

D = 400 - 499 watts (w 3.3V)

E = 500 - 599 watts (w 3.3V)

F = 600 - 699 watts (w 3.3V)

G = 700 - 799 watts (w 3.3V)

H = 800 - 899 watts (w 3.3V)

I = 900 - 999 watts (w 3.3V)

J = 1000 - 1099 watts (w 3.3V)

K = 1100 - 1199 watts (w 3.3V)

L = 1200 - 1299 watts (w 3.3V)

M = 1300 - 1399 watts (w 3.3V)

N = 1400 - 1499 watts (w 3.3V)

X = Not Installed

❑ SHIELDING LEVEL

0 = Level 0

1 = Level 1

2 = Level 2

X = Not Installed

38

VITA System 12 Vertical Large (12U)

FEATURES:

■


■

12U x 84HP x 20” (H x W x D)

■


■

2 to 21 slot VITA-Based System Platforms ( VME, VME64x, VXI)

■


■


■


■


swap options

■


(optional)

■


5 Row (160 PIN), 5 Row + P0

■


■

Standard Drive mounting

SCOPE OF SUPPLY




Description

■

21”(H) x 17”(W) x 19.68”(D}

■


■


■

Holds 4 x 5.25” HH Devices

■

3 x 100 CFM Fans, 12V DC Fans

■

750W: 5V/120A; +12V/12A;

-12V/10A

Order Number

12V21MM5C8N5VC90

VME

12V21OP5C8N5VC90

64X

39


LINE DRAWINGS

6U

19.68”

3U 3U

2U

4U

6U x 160mm

12U 7U 7U

6U x 160mm

6U

19”

Front View

2U 2U

Air Flow

19”

Rear View

ENVIRONMENTAL

Operating

Temperature:

Altitude:

Humidity:

Shock:

Vibration:

Agencies:

Weight

0°C to +50°C

6000 ft. (1,829m)


10 Gs @ 11ms

1.0 Gs @ 10 to 330 Hz


Approx: 36lbs


-20°C to +70°C

50,000 ft. (15,240m)


15 Gs @ 11ms (per ASTM 0775)

1.2 Gs @ 5 to 330 Hz




Example 7 slot = 07

Example 12 + 9 = LI

❑ BP BARE BOARD

A = oVPX, 6U, 1” (VITA 65)

B = oVPX, 3U, 1” (VITA 65)

C = oVPX, 6U, .8” (VITA 65)

D = oVPX, 3U, .8” (VITA 65)

H = oVPX, 6U, 1” + .8” (VITA 65)

I = oVPX, 3U, 1”+ .8 (VITA 65)

L = VXS Dual Star


N = VME64x, 6U

O = VME64x, 7U



S = VXS Star

T = VXS (Mesh)

X = No BP Installed

Z = Custom

❑ BP CONNECTOR




O = 5 row, w/o PO

P = 5 row, w/ PO

S = RT-2 (J0-J6) 6U

U = RT-2 (J0-J2) 3U

V = RT-2(J0-J6) 6U, RTM

W = RT-2 (J0-J2) 3U, RTM

X = No Connectors

Y = Hybrid

Z = Custom

12 V ❑ ❑ ❑ ❑ ❑ C 8 ❑ 5 V ❑ ❑ ❑

❑ DRIVES

1 = 1 x 3.5”

2 = 2 x 3.5”

3 = 1 x 5.25” HH

4 = 2 x 5.25” HH

5 = 4 x 5.25” HH

6 = 2 x 3.5”, 1 x 5.25” HH

7 = 1 x 3.5”, 2 x 5.25” HH

8 = 2 x 3.5”, 2 x 5.25” HH

9 = 1 x 3.5”, 1 x 5.25” HH

A = 1 x 2.5”,1 x CDR (SL)

B = 2 x 2.5”


X = No Mounting

❑ HEIGHT

C = 12U

❑ WIDTH

8 = 84 T

❑ REAR I/O

N = No

Y = Yes

❑ DEPTH

5 = 500mm - 599mm


V = Vertical

❑ PSU INPUT



E = 110/220VAC (2 x HS, N + 1)


H = 48VDC (Plug-in)

K = 48VDC (Fixed)

M = 48VDC (2 x HS, N + 1)

N = 28VDC (Fixed)

O = 28VDC (2 x HS, N+1)

P = 90-230VAC (2 x HS, N + 1)

X = No PSU

❑ PSU OUTPUT


1 = 100 - 199 watts (w/o 3.3V)

2 = 200 - 299 watts (w/o 3.3V)

3 = 300 - 399 watts (w/o 3.3V)

4 = 400 - 499 watts (w/o 3.3V)

5 = 500 - 599 watts (w/o 3.3V)

6 = 600 - 699 watts (w/o 3.3V)

7 = 700 - 799 watts (w/o 3.3V)

8 = 800 - 899 watts (w/o 3.3V)

9 = 900 - 999 watts (w/o 3.3V)

A = 100 - 199 watts (w 3.3V)

B = 200 - 299 watts (w 3.3V)

C = 300 - 399 watts (w 3.3V)

D = 400 - 499 watts (w 3.3V)

E = 500 - 599 watts (w 3.3V)

F = 600 - 699 watts (w 3.3V)

G = 700 - 799 watts (w 3.3V)

H = 800 - 899 watts (w 3.3V)

I = 900 - 999 watts (w 3.3V)

J = 1000 - 1099 watts (w 3.3V)

K = 1100 - 1199 watts (w 3.3V)

L = 1200 - 1299 watts (w 3.3V)

M = 1300 - 1399 watts (w 3.3V)

N = 1400 - 1499 watts (w 3.3V)

X = Not Installed

❑ SHIELDING LEVEL

0 = Level 0

1 = Level 1

2 = Level 2

X = Not Installed

40

VITA System 12 Enhanced Cooling (12U)

FEATURES:

■


■

12U x 84HP x 21” (H x W x D)

■


■

12, 17 and 18 slot VITA-Based System Platforms ( VPX, VXS)

■


■


■


■


swap options

■


(optional)

■


5 Row (160 PIN), 5 Row + P0, RT-2

■


■

Standard Drive mounting

SCOPE OF SUPPLY




Description

■

21" (H) x 17”(W) x 500mm(D)

■


■

Holds 17, 6U x 80mm RTMs (recessed)

■

17 Slot oVPX / Hyb Backplane (K2K-X1)*

■

3 x 190 CFM Fans

■

1200 W: 5V/120A; +12A/16.7A;

-12V/16.7A; 3.3V/80A

■

Rear I/O


Description

■

21”(H) x 17”(W) x 21”(D)

■


■

18 Slot VXS Backplane, Dual Star

■

No Device Mounting

■

3 x 190 CFM Fans

■

1300W: 5V/40A; 12V/50A;

12V/16,7A; -12V/16.7A; 3.3V/40A

■

Rear I/O

Order Number

12V17PSXC8Y5VC02

Order Number

12V18LLXC8Y5VCM2

VPX

VXS

VXS

41


LINE DRAWINGS

21”

6U x 160mm

2U

6U 6U x 160mm

6U x

80mm

Rear I/O

12U

84HP

Front View

4U

A

Air Flow 84HP

Rear View

ENVIRONMENTAL

Operating

Temperature:

Altitude:

Humidity:

Shock:

Vibration:

Agencies:

Weight :

0°C to +50°C

6000 ft. (1,829m)


10 Gs @ 11ms

1.0 Gs @ 10 to 330 Hz


Approx: 34lbs


-20°C to +70°C

50,000 ft. (15,240m)


15 Gs @ 11ms (per ASTM 0775)

1.2 Gs @ 5 to 330 Hz




Example 7 slot = 07

Example 12 + 9 = LI

❑ BP BARE BOARD

A = oVPX, 6U, 1” (VITA 65)

B = oVPX, 3U, 1” (VITA 65)

C = oVPX, 6U, .8” (VITA 65)

D = oVPX, 3U, .8” (VITA 65)

H = oVPX, 6U, 1” + .8” (VITA 65)

I = oVPX, 3U, 1”+ .8 (VITA 65)

L = VXS Dual Star


N = VME64x, 6U

O = VME64x, 7U



S = VXS Star

T = VXS (Mesh)

X = No BP Installed

Z = Custom

❑ BP CONNECTOR




O = 5 row, w/o PO

P = 5 row, w/ PO

S = RT-2 (J0-J6) 6U

U = RT-2 (J0-J2) 3U

V = RT-2(J0-J6) 6U, RTM

W = RT-2 (J0-J2) 3U, RTM

X = No Connectors

Y = Hybrid

Z = Custom

12 V ❑ ❑ ❑ ❑ ❑ C 8 Y 5 V ❑ ❑ ❑

❑ DRIVES

1 = 1 x 3.5”

2 = 2 x 3.5”

3 = 1 x 5.25” HH

4 = 2 x 5.25” HH

5 = 4 x 5.25” HH

6 = 2 x 3.5”, 1 x 5.25” HH

7 = 1 x 3.5”, 2 x 5.25” HH

8 = 2 x 3.5”, 2 x 5.25” HH

9 = 1 x 3.5”, 1 x 5.25” HH

A = 1 x 2.5”,1 x CDR (SL)

B = 2 x 2.5”

C = 6 x 5.25” HH


X = No Mounting

❑ HEIGHT

C = 12U

❑ WIDTH

8 = 84 T

❑ REAR I/O

N = No

Y = Yes

❑ DEPTH

5 = 500mm - 599mm

6 = 600mm - 699mm


V = Vertical

H = 48VDC (Plug-in)

K = 48VDC (Fixed)

M = 48VDC (2 x HS, N + 1)

N = 28VDC (Fixed)

O = 28VDC (2 x HS, N+1)

P = 90-230VAC (2 x HS, N + 1)

X = No PSU

❑ PSU OUTPUT


6 = 600 - 699 watts (w/o 3.3V)

7 = 700 - 799 watts (w/o 3.3V)

8 = 800 - 899 watts (w/o 3.3V)

9 = 900 - 999 watts (w/o 3.3V)

A = 100 - 199 watts (w 3.3V)

B = 200 - 299 watts (w 3.3V)

C = 300 - 399 watts (w 3.3V)

D = 400 - 499 watts (w 3.3V)

E = 500 - 599 watts (w 3.3V)

F = 600 - 699 watts (w 3.3V)

G = 700 - 799 watts (w 3.3V)

H = 800 - 899 watts (w 3.3V)

I = 900 - 999 watts (w 3.3V)

J = 1000 - 1099 watts (w 3.3V)

K = 1100 - 1199 watts (w 3.3V)

L = 1200 - 1299 watts (w 3.3V)

M = 1300 - 1399 watts (w 3.3V)

N = 1400 - 1499 watts (w 3.3V)

O = 1500 - 1599 watts (w 3.3V)

X = Not Installed

❑ PSU INPUT



E = 110/220VAC (2 x HS, N + 1)


❑ SHIELDING LEVEL

0 = Level 0

1 = Level 1

2 = Level 2

X = Not Installed

42

ECP Embedded Computing Products

Embedded Computing Solutions by Elma

Elma’s Embedded Computing Products, designed and marketed under the ACT/Technico brand, provides innovative solutions with best in class partner products, our own line of storage and

I/O products, and over 100 man-years of system integration experience. We also provide ruggedized solutions to meet the most demanding environmental requirements. Certified to ISO

9001, the company supplies integrated embedded systems to companies in defense/aerospace, homeland security, semiconductor equipment, communications, energy, and transportation industries.

Elma Electronic is the premier electronic packaging expert and offers best in class embedded board level products and services.

Experience enables us to provide you with the right embedded system platform for your program needs. To support this effort, we have a first-class offering of standards based products -- single board computers, mass storage, networking, device drivers, and more. We take true COTS products, such as single board computers and PMCs, then enhance and qualify them to meet project requirements.

The next several pages offer a brief overview of the product categories and services available. Please visit our website or contact your sales representative for complete listings and further details.

Storage

Innovative Embedded Mass Storage Solutions

■

Direct Attached Storage (DAS)

■

Network Attached Storage (NAS) / RAID 0 - 5

■

Removable drives / Hot Swap & FRU

■

Data Security Solutions:

• Secure-Erase

• Write-Protect

Drive Form Factors: 1.8”, 2.5” & 3.5” & CF

■

Rotating

■

Solid state flash

■

Optical (CD/DVD)

■

Tape drives

Board Form Factors:

■

PMC/XMC

■

6U VME, VXS

■

3U & 6U VPX and OpenVPX

93


Single Board Computers & Blades

From legacy to latest technologies

Processors Supported:

■

PowerPC

■

PowerQUICC

■

Intel architectures

■

Single and multicore processors

Form Factors:

■

PMC, XMC

■

6U VME, VXS

■


■

COTS Ruggedization Program: Enhanced and/or modified

standard products

■

Extending board temperature ranges

■

Conduction cooled

Networking

Full range of Ethernet solutions

Switches and controllers:

■

Fast (10/100), Gigabit and 10 Gigabit Ethernet

■

Up to 26 ports in a single slot

■

Copper / Fiber (Optical)

■

Layer 2 and full wire speed Layer 3

■

IPv4 & IPv6

■

Multicast / Unicast

■

Standard, extended temp and conduction cooled versions

Board Form Factors:

■

PMC/XMC

■

6U VME, VITA 31.1, VXS

■


I/O Products

Wide range of available solutions

Functions:

■

Audio and video

■

Serial, parallel, binary

■

Network Interface Controller (NICs)

■

SCSI / ATA

■

A/D and D/A channel converters

■

1553, ARINC

■

Motion control, CANbus

■

FPGA based

Form Factors:

■

PMC, XMC, AMC

■


94

ECP Embedded Computing Products

AppliPaks SBC and I/O “Brick”

Level Application Development Systems

The Elma AppliPak is a bundled, single procurement source.

When you need to ensure that the Single Board Computer you order from us works with specific mezzanines, we can provide the SBC and the modules in a “brick” assembly. We’ll bundle the boards under a single model number, qualify and test the assembly before shipment. A typical bundle includes a PowerPC or Intel SBC; Windows, Linux or VxWorks; boot file and drivers; choice of mass storage on PMC or 6U boards, and I/O options such as SCSI, Ethernet, digital I/O and audio. An AppliPak may also include Rear Transition Modules or Breakout Boards. The bricks are available in standard and rugged versions.

Elma can extend the environmental capabilities of your AppliPak with mechanical enhancements, temperature screening, and conformal coating. Each unit is fully tested and a full documentation package is available, including qualifications, manufacturing and test data.

SystemPaks

Application Development System Platforms

This takes the AppliPak to the sub-system platform level by bundling the board set into a fully integrated and tested subsystem assembly, ready for application development. Available for all standard bus architectures, it is configured, tested and shipped in a chassis suitable for the environment in which it will be used.

95

Subsystems

Integrated Sub-Systems

Our embedded sub-system solutions bring the bundle concept one step further, by providing the full range embedded package.

They are designed to provide a complete platform upon which our customers build their integrated systems.

Typical systems might include powered chassis with SBC(s), mass storage, rear transition modules, audio and video modules, Ethernet or fabric switch(es), the operating system and any necessary drivers. We work with you to manage the project through it’s entire life cycle.

Rugged Products

Standard COTS products enhanced for rugged environments

We can take true COTS products, such as single board computers and PMCs, then enhance and qualify them to meet project requirements. We offer a growing supply of conduction cooled boards as well as conformal coating for salt spray environments.

We qualify boards and systems to the environmental standards of MIL STDs 810F, 901D and 167, and 461. We also design and prepare these products for barge testing.

We offer conformal coating per MIL STD I-46508 where required, and can extend the temperature range of COTS boards when needed.

Services

Designed to fully support the total embedded solution

To support our efforts in providing you with the level of embedded solutions you require, we offer a full complement of services.

A platform solution might include any or all of the following: design & build plans, procurement, full product documentation, test services and plans, manufacturing, software installation, project management such as inventory & spares maintenance.

We can do pcb and mechanical design, full doc package support, and testing services. We also offer OS configuration and install along with device drivers.

96

Locations

Elma Production / Assembly / Sales

Elma Sales Office

ELMA ELECTRONIC/OPTIMA UNITED STATES, ELMA ELECTRONIC

Elma Electronic/Optima EPS

1775 MacLeod Drive

Lawrenceville, GA 30043

Phone: (770) 496-4000

Fax: (770) 496-4041 [email protected]

www.optimaeps.com, & www.elma.com

Elma Electronic US Headquarters

44350 Grimmer Blvd.

Fremont, CA 94538

Phone: (510) 656-3400


www.elma.com

Elma Electronic Inc.

760 Veterans Circle

Warminster, PA 18974

Phone: 215-956-1200

Fax: 215-956-1201 [email protected] www.elmasystems.com

ELMA BUSTRONIC

Elma Bustronic Headquarters

44350 Grimmer Blvd.

Fremont, CA 94538

Phone: (510) 490-7388


www.elmabustronic.com

SWITZERLAND CHINA ASIA PACIFIC

Elma Electronic AG

Hofstrasse 93, Postfach

8620 Wetzikon

Phone: +41 44 933 41 11

Fax CH:+41 44 933 42 15

Fax Inter: +41 44 932 38 12 [email protected]

www.elma.com

Elma Electronic China

8F, 355 Fu Te Road (West1)

Wai Gao Qiao Free Trade Zone

Pudong District, Shanghai 200131

Phone: +86 21 5866 5908

Fax: +86 21 5866 5918 [email protected]

www.elma.com

Elma Asia Pacific Pte. Ltd

115-A Commonwealth Drive

#03-14 Tanglin Halt Industrial Estate

Singapore 149596

Phone: +65 6479 8552

Fax: +65 6479 8662 [email protected]

www.elma.com

GERMANY

Elma Trenew Electronic GmbH

Stuttgarter Strasse 11

D-75179 Pforzheim

Phone: +49 7231 97 340

Fax: +49 7231 97 3497 [email protected]

www.elma.com

UNITED KINGDOM ISRAEL FRANCE ROMANIA

Elma Electronic UK Ltd

Solutions House, Fraser Road

Priory Business Park

Bedford MK44 3BF

Phone: +44 (0)1234 838822

Fax: +44 (0)1234 836650 [email protected]

www.elma.com

Elma Electronic Israel Ltd.

34, Modi'in St.

IL.Z. Sgula

Petach-Tikva 49271

Phone: +972 3 930 50 25

Fax: +972 3 931 31 34 [email protected]

www.elma.com

Elma Electronic France SASU

ZA du Buisson Rond

F-38460 Villemoirieu

Phone: +33 4 37 06 21 10

Fax: +33 4 37 06 21 19 [email protected]

www.elma.com

Elma Electronic SRL

Maltopol Nr.16 Street, sector 1

RO-011048 Bucuresti

Phone +4021 310 7998

Fax +4021 310 7992 [email protected]

www.elma.com

Revision 4 - 2011

datasheet for 12V12MM578N5VC51 by Elma Electronic

VITA-Based System Platforms

VME, VME64x, VPX, VXS, VXI, and more

•

TYPE 12

BACKPLANES

ACCESSORIES

SYSTEM COMPONENTS

INTEGRATION SERVICES

TEST & VALIDATION

SERVICES

Elma Electronic Inc.

VITA (VMEbus International Trade Association)

VMEbus Products:

VITA (VMEbus International Trade Association)

VITA System 12 Enclosure Overview

VITA System 12 Enclosure Overview

Measurements of Shielding Effectiveness on Type 12

VITA System 12 Enclosure Overview

Shock and Vibration

VITA System 12 Enclosure Overview

VITA System 12 Horizontal Enclosure (3U)

VITA System 12 Horizontal Enclosure (4U & 6U)

VITA System 12 Vertical Enclosure, Short (7U)

VITA System 12 Vertical Enclosure, Long (7U)

VITA System 12 Vertical Enclosure, Short (9U)

VITA System 12 Vertical Enclosure, Long (9U)

VITA System 12 Vertical Enclosure (10U)

VITA System 12 Vertical Large (12U)

VITA System 12 Enhanced Cooling (12U)

ECP Embedded Computing Products

Storage

ECP Embedded Computing Products

Locations

Related manuals

kontron

FS-1203