Quick Reference Guide (Download PDF, 2.3M)

Quick Reference Guide (Download PDF, 2.3M)
2015 Infiniti Q70
Hybrid
Quick Reference Guide
Behind
steering
wheel
Behind
steering
wheel
4
1
3
2
6
7
8
7
11
10
21
5
9
22
12
23
13 14 15
17 18
19
16
Behind
steering wheel
24
25
20
ADAPTIVE FRONT LIGHTING SYSTEM
1 (AFS) SWITCH*
14 BACK-UP COLLISION INTERVENTION (BCI)
SYSTEM OFF SWITCH*
INSTRUMENT BRIGHTNESS
2 CONTROL SWITCHES*
15 WARNING SYSTEMS SWITCH
3 VEHICLE INFORMATION DISPLAY*
16 TILT / TELESCOPIC STEERING WHEEL SWITCH*
4 TRIP RESET SWITCH*
17 REAR SUNSHADE SWITCH*
5 TRIP COMPUTER SWITCHES
18 HEATED STEERING WHEEL SWITCH*
HEADLIGHT AND TURN SIGNAL SWITCH
6 19 TRUNK LID RELEASE SWITCH
7 A SSIST CHARGE GAUGE
20 HOOD RELEASE*
8 E V INDICATOR LIGHT
21 CONTROL PANEL DISPLAY SCREEN
WINDSHIELD WIPER AND
9 WASHER SWITCH
22 CLIMATE CONTROL SYSTEM
23 AUDIO SYSTEM
10 S
TEERING WHEEL SWITCHES FOR
AUDIO / BLUETOOTH®
24 CLIMATE-CONTROLLED SEAT SWITCH*
11 INTELLIGENT CRUISE CONTROL
25 INFINITI DRIVE MODE SELECTOR
12 DYNAMIC DRIVER ASSISTANCE SWITCH*
13 VEHICLE DYNAMIC CONTROL (VDC)
OFF SWITCH*
*See your Owner’s Manual for information.
24
table of contents
new system features
Around View® Monitor with Moving Object Detection (MOD) (if so equipped) . . 2
Approaching Vehicle Sound for Pedestrians (VSP) System . . . . . . . . . . . . . . . . . . 4
INFINITI Connection™ (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Automatic Anti-glare Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Blind Spot Warning (BSW) and Blind Spot Intervention® (BSI)
(if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Back-up Collision Intervention (BCI) System (if so equipped) . . . . . . . . . . . . . . . 6
Predictive Forward Collision Warning (PFCW) System (if so equipped) . . . . . . . . 7
Forward Emergency Braking (FEB) System (if so equipped) . . . . . . . . . . . . . . . . . . 7
Lane Departure Warning (LDW) System (if so equipped) . . . . . . . . . . . . . . . . . . . . 7
NavTraffic and NavWeather . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
essential information
Tire Pressure Monitoring System (TPMS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Direct Response Hybrid™ System Warning Light . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Hybrid Awareness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
INFINITI Drive Mode Selector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Warning Systems Switch (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Accessing the Front Cup Holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Loose Fuel Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Fuel-filler Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Clock Set/Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
first drive features
INFINITI Intelligent Key System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Trunk Lid Release . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Seat Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Automatic Drive Positioner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Outside Mirror Control Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Assist Charge Gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Starting/Stopping the Hybrid System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Headlight Control Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Windshield Wiper and Washer Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Automatic Climate Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
FM/AM/SiriusXM® Satellite Radio with CD/DVD (if so equipped) Player . . . . . 20
USB (Universal Serial Bus) Connection Port/iPod® Interface . . . . . . . . . . . . . . 21
Conventional (Fixed Speed) Cruise Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Intelligent Cruise Control (ICC) System (if so equipped) . . . . . . . . . . . . . . . . . . 22
system guide
Trip Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Bluetooth® Hands-free Phone System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
System Operating Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Bluetooth® System with Navigation (if so equipped) . . . . . . . . . . . . . . . . . . . . . 24
Bluetooth® System without Navigation (if so equipped) . . . . . . . . . . . . . . . . . . 26
Navigation System (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
DVD Player (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
HomeLink® Universal Transceiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Please see your Owner’s Manual for important safety information
and system operation limitations.
• A cellular telephone should not be used for any purpose while
driving so full attention may be given to vehicle operation.
• Always wear your seat belt.
• Supplemental air bags do not replace proper seat belt usage.
• Children 12 and under should always ride in the rear seat
properly secured in child restraints or seat belts according to
their age and weight.
• Do not drink and drive.
For more information, refer to the “Safety — Seats, seat belts and
supplemental restraint system (section 1)”, the “Monitor, climate, audio,
phone and voice recognition systems (section 4)” and the “Starting and
driving (section 5)” of your Owner’s Manual.
Additional information about your vehicle is also available in your Owner’s
Manual, Navigation System Owner’s Manual and at www.InfinitiUSA.com.
To view detailed
instructional videos, go to
www.infinitiownersinfo.mobi/2015/q70
or snap this barcode with an
appropriate barcode reader.
new s y s te m f e a t u r e s
Around View® Monitor (AVM) with Moving Object Detection (MOD)
(if so equipped)
With the ignition switch in the ON position, the
Around View® Monitor is activated by pressing the
CAMERA button 1 , located on the control panel,
or by moving the shift lever to the R (REVERSE)
position. The control panel displays various views
of the position of the vehicle.
When the shift lever is in the P (PARK), N (NEUTRAL)
or D (DRIVE) position and the CAMERA button 1 is
pressed, the following views will display in order:
Start from any Control Panel screen
1
Front view and bird’s-eye view
Press
Press
Press
Front view and front-side view
Front wide view
Press
When the shift lever is in the R (REVERSE) position and the CAMERA button 1 is pressed,
the following views will display in order:
Rear view and bird’s-eye view
Rear view and front-side view
Press
Rear wide view
Press
2
Press
The colored guide lines on the display screen indicate vehicle width and approximate
distances to objects with reference to the vehicle body line.
• Red 1.5 ft (0.5 m); Yellow 3 ft (1 m); Green 7 ft (2 m) and 10 ft (3 m).
There are some areas where the system will not show objects.
• When in the front or the rear view display, an
object below the bumper or on the ground may
not be viewed 2 .
• When in the bird’s-eye view, a tall object near
the seam of the camera viewing areas 3
will not appear in the monitor.
2
The distance between objects viewed on the
AVM differs from the actual distance.
Objects in the bird’s-eye view will appear further
than the actual distance.
MOVING OBJECT DETECTION (MOD)
If the MOD system detects moving objects
surrounding the vehicle, a yellow frame 4 will
be displayed on the camera image and a chime
will sound.
In the bird’s-eye view, a yellow frame is displayed
on those camera images (front, rear, right, left)
where moving objects are detected.
When the following are displayed:
3
5
6
4
•B
lue MOD icon 5 ; the system is operative in this view.
•G
ray MOD icon 6 ; the system is not operative in this view.
7
• N
o MOD icon; the system is off.
To temporarily turn the system on or off, touch the Sonar-MOD key 7 .
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (section 4)” of
your Owner’s Manual.
3
new s y s te m f e a t u r e s
Approaching Vehicle Sound for Pedestrians (VSP) System
The VSP system helps alert pedestrians to the presence of the vehicle when it is being driven
at a low speed.
When the vehicle starts to move, it produces a sound. The sound stops when the vehicle speed
reaches approximately 19 mph (30 km/h) while accelerating.
This sound will activate again when decelerating to a speed less than 16 mph (25 km/h).
For more information, refer to the “Hybrid System Overview (section Hybrid System)” of your Owner’s Manual.
INFINITI Connection™ * (if so equipped)
INFINITI Connection™ combines personalized
convenience, concierge settings and personal security
features to compliment the total ownership experience.
For more details on INFINITI Connection or to enroll
your vehicle, please visit www.InfinitiConnection.com or
call 855-444-7244.
Available services include:
INFINITI Personal Assistant – To access INFINITI
Personal Assistant, select “Connect to Voice Menu” from the INFINITI Connection menu or
touch the
key on the map screen. At the voice prompt, say “INFINITI Personal Assistant”
to be connected.
•Y
our INFINITI Personal Assistant can send destination information directly to your vehicle.
To access, go to the INFINITI Connection menu and select “Sync All Information Feeds”. Then go
to the Feeds menu page and download the desired destination information.
Automatic Collision Notification – In case of air bag deployment, a signal is sent containing
the vehicle location and customer information to
notify the proper authorities.
Emergency Call – This service provides emergency
assistance by connecting the subscriber to an
INFINITI Connection Specialist.
• I n case of an emergency, press the in-vehicle
telematics SOS button 1 .
•A
Response Specialist will provide assistance based
on the situation described by the vehicle’s occupant.
1
Enhanced Roadside Assistance – Roadside Assistance can be accessed by touching the
INFINITI Connection key on the Info menu, the
key on the map screen or by pressing the
SOS button 1 .
• T his service allows subscribers to receive assistance for a non-emergency incident, such as
towing, or a third party response.
• I f warranted, Roadside Assistance may also be used in conjunction with the Emergency
Assistance service by pressing the SOS button 1 .
*INFINITI Connection™ is only available on vehicles equipped with optional INFINITI Connection subscription service.
4
My Schedule – Access your personal online Google Calendar™, hear details read via
text-to-speech** and a select location as a destination via the Navigation System.
R
eport Stolen Vehicle – A Response Specialist will attempt to obtain location information
from a reported stolen vehicle and provide that information to a local
law enforcement agency.
R
emote Door Lock/Unlock – Remotely access your vehicle via an INFINITI Connection
Response Specialist or designated website to remotely lock or unlock your vehicle.
Alarm Notification – This system will notify you when the factory-installed vehicle alarm
system has been activated.
S
cheduled Maintenance Notification – Receive scheduled maintenance notifications based
on mileage data provided by your vehicle.
Maintenance Alert – Receive notification of a vehicle system malfunction that triggers
instrument panel warning lights.
D
estination Assistance – Receive point-of-interest assistance via guided IVR (Interactive
Voice Response) or a Response Specialist by pressing the
on the map screen or the
INFINITI Connection web portal.
D
estination Send-to-Vehicle – Find and download point-of interest information from
Google Maps™.
C
onnected Search – Select “Connected Search” from the Destination menu on the vehicle’s
Navigation System to conduct a point-of-interest search within a certain distance of the
vehicle’s location.
D
rive Zone – Monitor the movement of your vehicle within a specified region. Set up
boundaries in the Monitoring section of the INFINITI Connection web portal.
Max Speed Alert – Set a maximum speed on the INFINITI Connection web portal. You will
receive notifications if your vehicle exceeds the maximum speed setting.
Mobile Information Service – Receive the latest news headlines, stock quotes and sports
scores by setting up preferences on the Mobile Information Service page in the INFINITI
Connection web portal.
Valet Alert – Use to set up a 0.2 mile radius around your vehicle.
•A
ctivate alerts by pressing the “Connect to Voice Menu” button on the INFINITI Connection
screen or by pressing the
key on the map screen.
•A
t the prompt, say “Valet Alert” and then “Activate” or “Deactivate”.
For more information, refer to the “Viewing technical information (section 7)” of your Navigation System Owner’s Manual.
**Laws in some communities may restrict the use of text-to-speech. Check local regulations before using this feature.
5
new s y s te m f e a t u r e s
Automatic Anti-glare Mirrors
The inside rearview mirror and both outside mirrors are designed to automatically change
reflection according to the intensity of the headlights of the vehicle following you.
The anti-glare system will be automatically turned on when the ignition switch is in
the ON position.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
Blind Spot Warning (BSW) and Blind Spot Intervention® (BSI)
(if so equipped)
The Blind Spot Warning (BSW) system alerts the
driver when another vehicle moves into the vehicle’s
blind spot area.
An indicator light 1 near the driver’s outside mirror
will illuminate if the radar sensors detect a vehicle in
the detection zone.
The Blind Spot Intervention® (BSI) system can assist the driver in
returning the vehicle to the center of the traveling lane by applying
individual brake pressure to the left or right wheels for a short period
of time.
1
2
The indicator light 2 will first illuminate in orange and then turn green
before extinguishing. This indicates that the Blind Spot Warning (BSW)
and Blind Spot Intervention® (BSI) systems are operational.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
Back-up Collision Intervention (BCI) System (if so equipped)
The Back-up Collision Intervention (BCI) system can help alert the driver of an approaching
vehicle or objects behind the vehicle when backing out of parking spaces.
The rear radar sensors detect the approaching vehicle from up to approximately 49 ft (15 m)
from the bumper.
For more information, refer to the “Starting and driving (section 5)” in your Owner’s Manual.
6
Predictive Forward Collision Warning (PFCW) System (if so equipped)
The Predictive Forward Collision Warning (PFCW) system can help alert the driver when
there is sudden braking of the second vehicle traveling in front of the vehicle ahead,
traveling in the same lane.
The PFCW uses a sensor in the front bumper to measure the distance of a second vehicle
ahead in the traveling lane. The system operates at speeds above 3 mph (5 km/h).
If there is potential risk, the PFCW will warn the driver with a blinking driver assist system
forward indicator and an audible warning tone will be heard.
For more information, refer to the “Starting and driving (section 5)” in your Owner’s Manual.
Forward Emergency Braking (FEB) System (if so equipped)
The Forward Emergency Braking (FEB) system can assist the driver when there is risk of a
forward collision with the vehicle in the traveling lane.
The FEB operates at speeds greater than 3 mph (5 km/h).
If there is risk of a collision an audible tone will be heard, a visual warning will display
and the vehicle will push up on the accelerator pedal. If the driver releases the accelerator
pedal the vehicle will begin applying the brakes, however if the driver does nothing the
system will issue another audible and visual warning and apply the brakes harder.
For more information, refer to the “Starting and driving (section 5)” in your Owner’s Manual.
Lane Departure Warning (LDW) System (if so equipped)
The LDW system can help alert the driver when the vehicle is traveling too close to either
the left or the right side of a traveling lane.
The system will operate when the vehicle is driven at speeds of approximately 45 mph
(70 km/h) and above and only when the lane markings are clearly visible on the road.
1
When the vehicle approaches either the left or the right side of the traveling
lane, the LDW system will chime and the orange LDW light 1 on the
instrument panel will blink to alert the driver.
The LDW system can be turned on and off through
the Settings menu in the vehicle information
display. To temporarily turn off the system, push the
warning systems switch 2 .
When the system is off, the indicator light 3 on the
switch is off.
2
3
For more information, refer to the “Instruments and controls (section 2)” and the “Starting and driving (section 5)” of your
Owner’s Manual.
7
new s y s te m f e a t u r e s
NavTraffic* and NavWeather* (if so equipped)
Your vehicle’s Navigation System is equipped with
NavTraffic and NavWeather capabilities.
NavTraffic enables your vehicle’s Navigation System
to display real-time traffic conditions, such as
accidents or road construction, and may provide a
detour to help avoid congestion.
NavWeather tracks nationwide weather
information, provides real-time weather reports
and automatically alerts you to severe weather
conditions around your current vehicle location.
*These features, SiriusXM® Satellite Radio, NavTraffic and NavWeather
require an active subscription. Multiple subscriptions may be necessary to
activate the various features.
For more information, refer to the “Monitor, climate, audio, phone and voice
recognition systems (section 4)” of your Owner’s Manual.
8
e s s e n t i a l i n f or mat ion
Tire Pressure Monitoring System (TPMS)
A CHECK TIRE PRESSURE warning message will
appear in the vehicle information display 1 and
the low tire pressure warning light 2 will illuminate
when one or more tires are low in pressure and air
is needed.
• The tire pressures should be checked when the
tires are cold. The tires are considered cold after
the vehicle has been parked for 3 hours or more or
driven less than 1 mi (1.6 km) at moderate speeds.
1
2
After the tire pressures are adjusted, drive the vehicle at speeds above 16 mph
(25 km/h). The CHECK TIRE PRESSURE warning message and low tire pressure warning
light will extinguish.
When the low tire pressure warning light flashes for 1 minute and then remains on, the
TPMS is not functioning properly. Have the system checked by an INFINITI retailer.
Tire pressure rises and falls depending on the heat caused by the vehicle’s operation and
the outside temperature. Low outside temperature can lower the temperature of the air
inside the tire, which can cause a lower tire inflation pressure. This may cause the low
tire pressure warning light to illuminate. If the warning light illuminates, check the tire
pressure in your tires.
• Check the tire pressure (including the spare tire) often and always prior to long
distance trips.
The Tire and Loading Information label contains valuable information. Please refer to the
“Technical and consumer information” (section 9) in your Owner’s Manual for the location
of the Tire and Loading Information label.
For more information, refer to the “Instruments and controls (section 2)”, the “Starting and driving (section 5)” and the
“Maintenance and do-it-yourself (section 8)” of your Owner’s Manual.
Direct Response Hybrid™ System Warning Light
This light will illuminate when the ignition switch is in
the ON position and will extinguish when the hybrid
system is started.
The light will also illuminate when a malfunction
occurs in the electric motor or hybrid system.
When this light illuminates while driving, immediately
stop the vehicle in a safe location and contact an INFINITI retailer.
If the hybrid system warning light blinks while driving, it may indicate that the Li-ion battery
charge is low and you cannot continue to drive.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
9
essent i al i n f o r m a t i o n
Hybrid Awareness
Y
our vehicle is virtually silent in the electric mode. If you exit your vehicle while it is ON but the
engine is not running, the engine will automatically start, informing you that the car
is still ON.
D
o not store your INFINITI Intelligent Key within the detection range of the vehicle. This may
cause welcome lights and other functions to activate, creating unwanted battery drain.
T he hybrid system is designed for optimum efficiency and performance. Activation of the
electric mode may vary with driving conditions and driver input. A full battery display does
not indicate the vehicle should be in the electric mode.
For more information, refer to the “Hybrid System Overview (section Hybrid System)” of your Owner’s Manual.
INFINITI Drive Mode Selector
Turn the switch to the following position to select the corresponding drive mode:
1 STANDARD - Used for standard or normal driving.
1
2 SPORT - The engine and transmission will adjust,
resulting in higher engine rpm and a more aggressive
shift pattern. In this mode, fuel economy may
be reduced.
4
2
3
3 SNOW – Used on snowy roads or slippery areas.
In this mode, engine output is controlled to avoid
wheel spin.
4 ECO – Adjusts engine and transmission points to enhance fuel economy.
ECO PEDAL SYSTEM (if so equipped)
With the INFINITI Drive Mode Selector switch in the ECO mode, the ECO pedal system
assists the driver in improving fuel economy.
The ECO pedal system applies force to make the accelerator pedal heavier, depending on the
accelerator pedal operation.
To change the ECO pedal reaction force:
1. Push the SETTING button on the control panel.
2. Touch the ECO DRIVE key.
3. Touch the ECO pedal key and select one of the options below:
• OFF — Turns the ECO pedal system off.
• Soft — Softens the reaction force.
• Standard — Reaction force is normal.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
10
Warning Systems Switch (if so equipped)
The warning systems switch 1 will turn on or off any
enabled warning systems, including the LDW and
BSW. Systems that are not enabled will always
remain off.
When the warning systems switch is turned off, the
indicator light 2 on the switch is off. If the warning
systems switch is illuminated, the system is on. The
indicator will also be off if all of the warning systems
are deactivated using the Settings menu.
1
2
3
4
6
To enable or disable these systems, perform the
following operation:
1. Press the SETTING button 3 on the control panel.
2. Using the INFINITI Controller 4 , highlight the
“Driver Assistance” key 5 on the display. Then
press the ENTER button 6 .
5
3. Highlight the corresponding warning system key
7 , select ON (enabled) or OFF (disabled) and
press the ENTER button 6 .
7
For more information, refer to the “Starting and driving (section 5)” of your
Owner’s Manual.
Accessing the Front Cup Holders
To open the cup holders, push the
lid 1 down and release.
1
For more information, refer to the “Instruments and
controls (section 2)” of your Owner’s Manual.
11
essent i al i n f o r m a t i o n
Loose Fuel Cap
A LOOSE FUEL CAP warning message will appear in the
vehicle information display 1 when the fuel-filler
cap is not tightened correctly.
1
To tighten, turn the cap clockwise until a single click
is heard.
The warning message will extinguish when the vehicle
detects the fuel-filler cap is properly tightened and the
reset button 2 is pressed for more than 1 second.
If the cap is not properly tightened, the Malfunction
Indicator Light
may illuminate.
2
For more information, refer to the “Instruments and controls (section 2)” and
the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
Fuel-filler Door
The fuel-filler door is located on the passenger’s side of
the vehicle.
When the doors of the vehicle are locked or unlocked,
the fuel-filler door is automatically locked or unlocked
at the same time.
To open the door, push the upper left side of the door.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
Clock Set/Adjustment
DIGITAL CLOCK ADJUSTMENT
To adjust the time and the appearance of the clock
on the display:
1. P
ress the SETTING button on the control panel.
2. T ouch the Others key.
3. T ouch the Clock key.
The following settings can be adjusted:
• On-screen Clock: The clock in the upper right corner of the display can be turned ON or OFF.
• Clock Format (24h): The clock can be set to 12 hours or 24 hours.
• Offset (hour): The time can be adjusted by increasing or decreasing per hour.
• Offset (min): The time can be adjusted by increasing or decreasing per minute.
• Daylight Savings Time: The application of daylight savings time can be turned ON or OFF.
• Time Zone: Adjust the time zone. Choose a time zone from the available list.
Press the
BACK button to return to the previous screen.
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (section 4)” of your
Owner’s Manual.
12
f i r s t d r i v e f e at ur e s
INFINITI Intelligent Key System
I t is important to make sure the Intelligent Key is with
you (that is, in your pocket or purse).
T he INFINITI Intelligent Key system allows you to lock
or unlock your vehicle, open your trunk and start
the engine.
1
T he operating range of the Intelligent Key is within
31.5 in (80 cm) from each request switch.
To lock the vehicle, push either door handle request
switch 1 once or press the button 2 on the key fob.
To unlock the vehicle, perform one of the following procedures:
• Push either door handle request switch 1 once; the corresponding
door will unlock. Push the door handle request switch 1 again within
1 minute; all other doors will unlock, or
• Press the
Press the
2
3
4
5
button 3 on the key fob to unlock the driver’s side door.
button again; all other doors will unlock.
To open the trunk, press the
button 4 for more than 1 second.
The Intelligent Key can also be used to activate the panic alarm by pressing
and holding the button 5 for more than 1 second. Once activated, the
panic alarm and headlights will stay on for a period of time.
INTELLIGENT KEY BATTERY DISCHARGE
If the battery of the Intelligent Key is discharged or
environmental conditions interfere with the Intelligent
Key operation, start the engine according to the
following procedure:
1. Move the shift lever to the P (PARK) position.
2. Firmly apply the foot brake.
3. Touch the ignition switch with the Intelligent Key, and a chime will sound.
4. Within 10 seconds after the chime sounds, push the ignition switch while depressing the
brake pedal and the engine will start.
For more information, refer to the “Pre-driving checks and adjustments (section 3)”, the “Starting and driving (section 5)” and the
“Maintenance and do-it-yourself (section 8)” of your Owner’s Manual.
13
f irst dr i v e f e a t u r e s
Trunk Lid Release
Use one of the following methods to unlatch the trunk lid
then lift the lid to open the trunk:
Push the trunk open request switch 1 under the
trunk handle while carrying
the INFINITI Intelligent Key
with you.
1
Press the
button 2 on the key fob for
HOLD
more than 1 second.
2
From inside the vehicle, push the trunk lid release
switch 3 .
For more information, refer to the “Pre-driving checks and adjustments
(section 3)” of your Owner’s Manual.
3
Seat Adjustments
To slide the seat forward or backward, push the switch
1 forward or backward.
To recline the seatback, push the switch
forward or backward.
2
SEAT LIFTER
1
2
3
To adjust the angle of the front seat cushion or height
of the seat, push the front or rear end of the switch
1 up or down.
LUMBAR SUPPORT
To adjust the seat lumbar support, push the front or back end of the switch
3 .
For more information, refer to the “Safety —— Seats, seat belts and supplemental restraint system (section 1)” of your
Owner’s Manual.
14
Automatic Drive Positioner
Two positions for the driver’s seat, steering column
and outside mirrors can be stored in the automatic
drive positioner 1 memory.
1
Follow these steps to set the memory positions:
• Confirm the shift lever is in the P (PARK) position.
• Push the ignition switch to the ON position.
• Adjust the driver’s seat, steering column and outside mirrors to the desired positions,
using the adjusting switches for each feature.
• Push the SET switch and within 5 seconds push the memory switch (1 or 2) for at least
1 second.
• The indicator light on the memory switch you select will illuminate for approximately
5 seconds.
• T he driver’s seat, steering column and outside mirror positions are now set to your preferences.
These memorized positions can also be linked to your INFINITI Intelligent Key.
To link a memorized position to your INFINITI Intelligent Key, press the UNLOCK button on
the key fob after completing the previous step.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
Outside Mirror Control Switch
T o select the right or left side mirror, move the
switch 1 right or left.
3
A
djust each mirror to the desired position using the
switch 2 .
2
1
To fold the outside rearview mirrors, push the switch
3 to the
position. To unfold the outside rearview mirrors, push the switch 3 to the
position.
REVERSE TILT-DOWN FEATURE
When backing up the vehicle, the right or left outside mirror can be selected to automatically turn downward.
1. Push the ignition switch to the ON position.
2. Move the shift lever to the R (REVERSE) position.
3. Choose the right or left outside mirror by operating the outside mirror control switch 1 .
4. The outside mirror surface moves downward.
When one of the following conditions has occurred, the outside mirror surface will return to
its original position.
• T he shift lever is moved to any position other than R (REVERSE).
• T he outside mirror control switch is set to the central or neutral position.
• T he ignition switch is pushed to the OFF position.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
15
f irst dr i v e f e a t u r e s
Assist Charge Gauge
This shows the power consumed 2 or generated
1 by the electric motor.
1
For more information, refer to the “Hybrid System Overview (section Hybrid
System)” and the “Instruments and controls (section 2)”
of your Owner’s Manual.
2
Starting/Stopping the Hybrid System
It is important to make sure the INFINITI Intelligent Key
is with you (that is, in your pocket or purse).
Depress the brake pedal.
Press the ignition switch START/STOP button to start
the hybrid system.
The ready to drive indicator light 1 will illuminate in
the meter, and you may begin driving the vehicle.
TURNING THE HYBRID SYSTEM OFF
Move the shift lever to the P (PARK) position and apply the parking brake.
Press the ignition switch START/STOP button to turn the hybrid system off.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
1
Headlight Control Switch
HEADLIGHT CONTROL
T urn the headlight control switch to the
position 1 to turn on the front parking, side
marker, tail, license plate and instrument panel
lights. Turn the switch to the
position 2 to
turn on the headlights.
3
1
2
AUTOLIGHT SYSTEM
T he autolight system will automatically turn the headlights on when it is dark and off when
it is light. The system will keep the headlights on for a period of time after you turn the
ignition off and all doors are closed.
T o activate the autolight system, turn the headlight control switch to the AUTO position 3
then push the ignition switch to the ON position. To deactivate the autolight system, turn
the headlight control switch to the OFF,
position 1 or
position 2 .
16
HIGH BEAM SELECT
4
P
ush the headlight control switch forward 4 to
select the high beam function. The blue indicator
light
illuminates in the instrument panel.
Pull the headlight switch back to the original
position to select the low beam. The blue indicator
light will extinguish.
5
P
ull and release the headlight control switch 5 to
flash the headlight high beams on and off.
FOG LIGHT SWITCH
T he headlights must be on and the low beams
selected for the fog lights to operate.
T urn the switch (inside collar) to the
to turn the fog lights on.
position 6
6
T urn the switch (inside collar) to the OFF position to
turn the fog lights off.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
Windshield Wiper and Washer Switch
M
ove the lever to one of the following positions to
operate the windshield wipers:
MIST 1
3
1 Mist (MIST) - One sweep operation of the wipers.
OFF
2 Auto (AUTO) - Operates the rain-sensing wipers
AUTO 2
LO 4
intermittently. To increase or decrease wiper
sensitivity, twist the control ring 3 .
HI 5
4 Low (LO) - Wipers operate at a continuous
low-speed.
5 High (HI) - Wipers operate at a continuous
high-speed.
6 Pull the lever toward you to activate the washer.
6
The wipers will operate several times.
WIPER BLADE REPLACEMENT PROCEDURE
The windshield wipers must be in the service position in order to replace the wiper blades. To
move the wiper blades to the service position, follow this procedure:
When the ignition switch is in the ON position, lift the windshield wiper and washer lever
up to the MIST position 1 two times in less than 0.5 seconds. The windshield wipers will
move to the service position automatically, and the wiper blades can now be replaced.
To move the wiper blades back to the original position:
Lift the windshield wiper and washer lever up for more than 1 second or push the lever
down to operate at any wiper speed.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
17
f i rst dr i v e f e a t u r e s
8
3
9
12
7
1
4
10
2
11
6
5
Automatic Climate Controls
1 AUTO BUTTON
T he automatic mode may be used year-round. Press the AUTO button to turn the system
on. The system will automatically control the inside temperature (automatic cooling and/
or dehumidified heating), air flow distribution and fan speed.
2 CLIMATE BUTTON
Press the CLIMATE button to adjust your automatic climate controls using the climate
settings on the control panel display screen.
3 DRIVER’S SIDE TEMPERATURE CONTROL BUTTONS
Press the driver’s side temperature control buttons up
cooler air.
for warmer air or down
for
4 DRIVER’S SIDE MANUAL AIR FLOW CONTROL BUTTON
Press the driver’s side manual air flow button to manually control the driver’s side air
flow modes.
The following air flow indicator modes will display on the control panel display screen:
Air flows from the center and side vents.
Air flows from the center, side and foot vents.
Air flows mainly from the foot vents.
Air flows from the defroster and foot vents.
5 PASSENGER’S SIDE TEMPERATURE CONTROL BUTTONS
To manually adjust the passenger’s side temperature, press the passenger’s side
temperature control buttons up for warmer air or down for cooler air.
6 PASSENGER’S SIDE MANUAL AIR FLOW CONTROL BUTTON
Press the passenger’s side manual air flow button to manually control the passenger’s side air flow modes.
The following air flow indicator modes will display on the control panel display screen:
Air flows from the center and side vents.
Air flows from the center, side and foot vents.
Air flows mainly from the foot vents.
Air flows from the defroster and foot vents.
18
7 FAN SPEED CONTROL BUTTONS
P
ress the left button to decrease the fan speed or press the right
crease the fan speed.
button to in-
8 DEFROSTING/DEFOGGING FRONT AND SIDE WINDOWS
P
ress the defroster button
to turn the system on. The A/C automatically turns
on when the defroster mode is selected. This feature removes humidity from the air.
T o defrost the front and side windows, set the temperature controls 3 and fan speed
controls 7 to their maximum settings.
9 DEFROSTING REAR WINDOW AND OUTSIDE MIRRORS
Push the rear window defroster switch
to turn the system on or off.
This function automatically turns off after approximately 15 minutes.
10 OUTSIDE AIR CIRCULATION BUTTON
P
ush the outside air circulation “
” button to change the air circulation mode. When
the indicator light illuminates, the flowing air is drawn from outside the vehicle.
11 AIR RECIRCULATION BUTTON
P
ush the air recirculation “
” button to change the air circulation mode. When the
indicator light illuminates, the flowing air is recirculated inside the vehicle.
T he air recirculation mode cannot be activated when the climate control system is in the
front defroster
mode or front defroster and foot vent mode .
12 OFF BUTTON
Press the OFF button to turn the climate control system off.
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (section 4)” of your
Owner’s Manual.
19
f i rst dr i v e f e a t u r e s
1
2
3
5
6
4
FM/AM/SiriusXM® Satellite Radio with CD/DVD (if so equipped) Player
1 ON•OFF BUTTON/VOL (volume) CONTROL KNOB
P
ress the ON•OFF button to turn the system on or off.
T urn the VOL (volume) control knob right or left to increase or decrease the volume.
2 AUDIO BUTTON/TUNE/FOLDER CONTROL KNOB
To manually tune the radio, turn the TUNE/FOLDER control knob left or right.
Press the AUDIO button to access the audio settings screen.
3 SEEK•CAT/TRACK BUTTON
To scan quickly and stop at the previous or next broadcast station, press the
end of the SEEK•CAT/TRACK button.
F or satellite radio, press the
or
end of the SEEK•CAT/TRACK button to switch to
the first channel of the previous or next category.
To change tracks on a CD, press the
T o rewind or fast forward a track on a CD, press and hold the
SEEK•CAT/TRACK button.
or
or
end of the SEEK•CAT/TRACK button.
or
end of the
4 STATION PRESET BUTTONS
Twelve stations can be set for the FM band, 6 for the AM band and 18 for satellite radio.
T o store a station in a preset, you must first select a radio band by pressing the FM•AM
button 5 or XM button 6 then tune to the desired FM, AM or satellite
radio station.
Then press and hold the desired station preset button (1-6) until the preset number is
updated on the display and the sound is briefly muted. The channel indicator will then
display, and the sound will resume. Programing is now complete.
To retrieve a previously set station, select the radio band where the preset was stored
then press the corresponding station select button (1-6).
*SiriusXM® Satellite Radio is only available on vehicles equipped with an optional satellite radio subscription service.
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (section 4)” of your
Owner’s Manual.
20
USB (Universal Serial Bus) Connection Port/iPod® Interface
The USB port 1 is located in the center console
under the arm rest.
When a compatible USB memory device or iPod®
is plugged into the USB port, compatible audio and
video files stored on the device can be played
through the vehicle’s audio system and front display.
For more information, refer to the “Monitor, climate, audio, phone and voice
recognition systems (section 4)” of your Owner’s Manual.
1
Conventional (Fixed Speed) Cruise Control
T he cruise control system enables you to set a
constant cruising speed once the vehicle has reached
25 mph (40km/h).
T he system will automatically maintain the set speed
until you tap the brake pedal, accelerate, cancel or
turn the system off.
4
3
1
2
To activate the cruise control, push the ON/OFF switch 1 . The CRUISE indicator light in the
instrument panel will illuminate.
To set cruising speed, accelerate the vehicle to the desired speed, push the COAST/SET switch
2 and release. The CRUISE/SET indicator light in the instrument panel will illuminate. Take
your foot off the accelerator pedal. Your vehicle will maintain the set speed.
To reset at a faster cruising speed, push and hold the ACCEL/RES switch 3 . When the
vehicle attains the desired speed, release the switch.
To reset at a slower cruising speed, push and hold the COAST/SET switch 2 . Release the
switch when the vehicle slows to the desired speed.
To cancel the preset speed, push the CANCEL switch 4 .
To turn off cruise control, push the ON/OFF switch 1 . Both the CRUISE indicator light and
the SET indicator light in the instrument panel will extinguish.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
21
f i rst dr i v e f e a t u r e s
Intelligent Cruise Control (ICC) System (if so equipped)
VEHICLE-TO-VEHICLE DISTANCE CONTROL MODE
T o set Vehicle-To-Vehicle Distance Control mode,
press the CRUISE ON/OFF button 1 for less than
1.5 seconds. The CRUISE indicator light 2
will illuminate.
8
7
4
3
Accelerate to the desired speed.
Push down on the COAST/SET switch 3 and release
it. Intelligent Cruise Control (ICC) will be set to the
desired speed.
1
Press the distance button 4 repeatedly to change
the set distance between long, middle and short.
When a vehicle is not detected ahead of you in the
lane, the set distance and set vehicle speed indicator
lights will illuminate 5 in set mode.
2
When a vehicle is detected ahead of you in the lane, the vehicle ahead
detection, set distance and set vehicle speed indicator lights will
illuminate 6 in set mode.
5
6
To reset at a faster cruising speed, push and hold the ACCEL/RES
switch 7 . When the vehicle attains the desired speed, release the switch.
To reset at a slower cruising speed, push and hold the COAST/SET switch 3 . Release the
switch when the vehicle slows to the desired speed.
To cancel the preset speed, push the CANCEL switch 8 or tap the brake pedal. The set
vehicle speed indicator 5 will extinguish.
To turn off Intelligent Cruise Control, press the CRUISE ON/OFF button 1 . The CRUISE
indicator light 2 in the instrument panel will extinguish.
To set conventional (fixed speed) cruise control mode:
While Intelligent Cruise Control is off, press the CRUISE ON/OFF button 1 and hold it down
for more than 1.5 seconds. The CRUISE indicator light will illuminate.
Accelerate to the desired speed.
Push down on the COAST/SET switch and release it. The SET indicator light will illuminate.
Cruise control should be set to the desired speed.
To switch between the two cruise control modes:
When one of the two cruise modes is in use, you must turn the system off and then turn it on
again to select the other cruise control mode.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
22
s y s t em guide
Trip Computer
W
hen the
button 1 is pressed, the following
modes will appear on the vehicle information
display. 2 :
• MPG – Displays the current fuel consumption.
• M
PG/MPH – Displays the average fuel consumption
and speed since the last reset.
1
3
— To reset the displayed MPG/MPH, press and hold
the
button 3 for more than 1 second. Both
displayed MPG/MPH will reset at the same time.
• TIME/MILES – Displays the elapsed time and total
distance the vehicle has been driven since the
last reset.
2
— To reset the elapsed time/miles, press and hold the
button 3 for more than 1
second. Both elapsed time/miles will reset at the same time.
• RANGE – Displays the estimated distance to empty (dte) the vehicle can be driven
before refueling.
• OUTSIDE TEMP – Displays the exterior air temperature, including a low temperature
warning feature.
• SETTING – Allows you to set reminders for alerts and maintenance intervals or change the
language and units used in the system.
— Press the
— Press the
button 3 to cycle through the various setting modes.
button 1 to choose the selected menu.
• To reset Trip A and Trip B, press and hold the TRIP RESET button for more than 1 second.
• When the fuel consumption and average speed are displayed, press and hold the
3 for more than 1 second to reset.
• When the elapsed time and trip odometer are displayed, press and hold the
for more than 1 second to reset.
button
button 3
• WARNING – Displays when a warning is present.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
Bluetooth® Hands-free Phone System
A
cellular telephone should not be used while driving
so full attention may be given to vehicle operation.*
SYSTEM OPERATING TIPS
Press the
or button to interrupt the voice
prompts at any time and speak a command after
the tone.
For vehicles not equipped with Navigation:
Bluetooth®
Controls
• To use the system faster, you may speak the second
level commands with the main menu command on the main menu. For example, press the
or button and after the tone say “Call Redial”.
*Some jurisdictions prohibit the use of cellular telephones while driving.
23
syste m g ui d e
For vehicles equipped with Navigation:
• Refer to the “Voice recognition (section 9)” of your
Navigation System Owner’s Manual
T he “Help” command can be used to hear a list of
available commands at any time.
R
educe background noise as much as possible by
closing windows and pointing HVAC vents away from the ceiling.
Speak naturally without long pauses and without raising your voice.
Microphone
W
hen speaking phonebook names, please be aware some phones
require the last name to be spoken before the first name. For example, “Michael Smith”
may be spoken as “Smith Michael”.
To cancel a Voice Recognition session, say “Cancel” or “Quit” or press and hold the
button for 5 seconds.
or
To go back to the previous command, say “Go back” or “Correction”.
If the Voice Recognition system does not recognize your voice commands, train the system
using the Speaker Adaptation Mode. See your Owner’s Manual for detailed information.
F or more detailed information and instructions, refer to your cellular phone’s Owner’s
Manual and visit www.InfinitiUSA.com/bluetooth.
Bluetooth® System with Navigation* (if so equipped)
CONNECTING PROCEDURE
The vehicle must be stationary when connecting
the phone.
1.Press the button on the steering wheel and select
the “Connect Phone” key.
2. Initiate connecting from the phone.
• The connecting procedure varies according to each
cellular phone model. For detailed connecting
instructions and a list of compatible phones,
please visit www.InfinitiUSA.com/bluetooth.
• When prompted for a PIN code, enter “1234”
from the handset. (The PIN code is assigned by
INFINITI and cannot be changed.)
3.When connecting is complete, the screen will return
to the “Phone” menu display.
*Some jurisdictions prohibit the use of cellular telephones while driving.
24
PHONEBOOK SETUP
Depending on your cellular phone, the system may automatically download your cellular
phone’s entire phonebook to the vehicle’s Bluetooth® System.
If the phonebook does not download automatically, the vehicle’s phonebook may be set for
up to 1,000 entries.
To manually download entries:
1.Press the
button and select the “Quick Dial” key.
2.Select the “Add New” key at the top of the display.
There are different methods to input a phone
number. Select one of the following options:
• “Copy from Call History” - to save a number from
the Outgoing, Incoming or Missed Calls lists.
• “Copy from the Handset” - to save a number
that has been downloaded from your handset to
the vehicle.
• “Enter Number by Keypad” - to input the number
and name manually.
MAKING A CALL
To make a call, follow this procedure:
1.Press the button on the steering wheel.
The “Phone” menu will appear on the control
panel display.
2.Select the “Quick Dial”, “Call History”,
“Phonebook” or “Dial Number” key.
3.Select the desired entry from the list.
4.Select “Call” to start dialing the number.
RECEIVING/ENDING A CALL
To accept the call, press the button on the
steering wheel or touch the “Answer” key.
To reject the call, touch the “Reject Call” key.
T o hang up, press the
“Hang up” key.
button or touch the
25
syste m g ui d e
Bluetooth® System without Navigation* (if so equipped)
PAIRING PROCEDURE
1.Press the
button on the steering wheel. The
system announces the available commands.
2.Say: “Connect Phone”. The system acknowledges the
command and announces the next set of
available commands.
3.Say: “Add Phone”. The system acknowledges the
command and asks you to initiate connecting from
the phone handset.
4. Initiate pairing from the phone.
• The connecting procedure varies according to each cellular phone model.
For detailed connecting instructions and a list of compatible phones,
please visit www.InfinitiUSA.com/bluetooth.
• When prompted for a PIN code, enter “1234” from the handset. (The PIN code is assigned
by INFINITI and cannot be changed.
5.Say a name for the phone when the system asks to provide one. You can give the phone a
name of your choice.
PHONEBOOK REGISTRATION
W
hen the cellular phone is connected to the in-vehicle module, the data stored in the cellular
phone, such as the phonebook, outgoing call logs, incoming call logs and missed call logs, is
automatically transferred and registered to the system.
T he availability of this function depends on each cellular phone. The copying procedure
also varies according to each cellular phone. See your cellular phone’s Owner’s Manual for
more information.
Up to 1,000 entries per registered cellular phone can be stored in the phonebook.
MAKING A CALL
1. Push the
button on the steering wheel. A tone will sound.
2.Say: “Call”. The system acknowledges the command and announces the next set of
available commands.
3.Say the registered person’s name. The system acknowledges the command and announces
the next set of available commands.
4.Say: “Yes”. The system acknowledges the command and makes the call.
RECEIVING/ENDING A CALL
To accept the call, press the
To reject the call, press the
To hang up, press the
button on the steering wheel.
button.
button.
*Some jurisdictions prohibit the use of cellular telephones while driving.
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (section 4)” of your Owner’s Manual
or please visit www.InfinitiUSA.com/bluetooth.
26
1
2
3
4
8
9
5
6
7
10
11
Navigation System (if so equipped)
1 Touch-screen display
2 DEST (Destination) – Press to enter a destination.
3 INFO (Information) – Press to display the vehicle, traffic (if so equipped), weather (if so
equipped) or Voice Recognition information.
4 SETTING – Press to access the system settings.
5 INFINITI Controller
• ENTER – Press the ENTER button to select the highlighted item on the screen.
• Center Dial – Turn the dial to highlight an item on the screen, adjust a setting or adjust the
map scale.
• Slide the controller (push upward/downward/leftward/rightward) to select an item on the
screen, to adjust a setting or scroll the map in eight directions.
6 ROUTE – Press to access guidance control functions, such as guidance cancellation, route
priority or waypoint setting on the route.
27
syste m g ui d e
7 MAP – Press to display the map. While following a programed route, press multiple times to
change the type of route information.
8 STATUS – Press multiple times to display audio information, air conditioner status, fuel
economy or navigation directions.
9
– Press to switch between the day screen (bright) and the night screen (dark). Press and
hold the button to turn the display off. Press again to turn the display on.
BACK – Press to return to the previous screen. In a settings screen, this button can also be
used to apply the setting. In a character input screen, this button can also delete the characters
that have been entered.
10 11 VOICE – Press to hear the current voice guidance for a programed route.
For more information, please refer to your Navigation System Owner’s Manual.
DVD Player (if so equipped)
T his system allows you to play video files via a DVD
or CD from the front display.
T o view movies on the front display, stop the vehicle
in a safe location, move the shift lever to the P (PARK)
position and apply the parking brake.
T o reduce driver distraction, movies will not be shown
on the front display while the vehicle is in any
drive position.
For more information, refer to the “Monitor, climate, audio, phone and voice
recognition systems (section 4)” of your Owner’s Manual.
28
HomeLink® Universal Transceiver
T he HomeLink® Universal
Transceiver can learn and
consolidate the functions of
up to 3 different hand-held
transmitters, operating items
such as garage doors, property
gates, outdoor and indoor lights
or alarm systems.
HOMELINK
To program the HomeLink® Universal Transceiver:
• Position the handheld transceiver 1-3 in (26-76 mm) away from the HomeLink surface,
keeping the HomeLink indicator light in view.
• Press and hold the desired HomeLink button and the handheld transmitter button
simultaneously until the HomeLink indicator light flashes slowly and then rapidly.
• Both buttons may be released when the indicator light flashes rapidly.
T o verify the programing is complete, press and hold the HomeLink button and observe the
indicator light:
• A solid, continuous light indicates the programing is complete and the HomeLink button
will activate your device.
• A blinking light that turns to a solid, continuous light after 2 seconds indicates additional
steps are required to complete the programing.
n additional person may make the remaining steps easier. To complete the
A
programing process:
• At the receiver of the device that you are programing to the HomeLink button, press
and release the learn or smart button (the name may vary by manufacturer but it is
usually located near where the hanging antenna wire is attached to the unit). You have
approximately 30 seconds to initiate the following step.
• Press and hold the programed HomeLink button for 2 seconds and release.
You may have to repeat the previous two steps up to 3 times to complete the programing
process. HomeLink should now activate your device. For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual, the HomeLink website at
www.homelink.com or call 1-800-355-3515.
29
Printing: July 2014 (03) / QR15EA HY51U0 / Printed in USA
To view detailed instructional videos, go to
www.infinitiownersinfo.mobi/2015/q70
or snap this barcode with an appropriate
barcode reader.
This Quick Reference Guide is intended to provide an overview of some of the unique features of
your new vehicle. Please see your Owner’s Manual for important safety information and system
operation limitations. Features and equipment in your vehicle may vary depending on model,
trim level, options selected, order, date of production, region or availability. Therefore, you may
find information about features or equipment that are not included or installed on your vehicle.
All information, specifications and illustrations in this Quick Reference Guide are those in effect
at the time of printing. NISSAN reserves the right to change specifications, performance, design
or component suppliers without notice and without obligation. From time to time, NISSAN may
update or revise this Quick Reference Guide to provide owners with the most accurate information
currently available. Please carefully read and retain, with this Quick Reference Guide, all revision
updates sent to you by NISSAN to ensure you have access to accurate and up-to-date information
regarding your vehicle. Current versions of vehicle Quick Reference Guides, Owner’s Manuals
and any updates can also be found in the Owner section of the INFINITI website at
https://owners.infinitiusa.com/iowners/navigation/manualsAndGuides. If you have questions
concerning any information in your Owner’s Manual, contact INFINITI Consumer Affairs. See
the INFINITI CUSTOMER CARE PROGRAM page in the Owner’s Manual for contact information.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement