814-816 Series Inverted Bucket Steam Traps

814-816 Series Inverted Bucket Steam Trap
Cast Iron for Horizontal Installation
Steam Trapping and
Steam Tracing Equipment
For Pressures to 250 psig (17 bar)...Capacities to 20,000 lb/hr (9,072 kg/hr)
C
A
B
D
Description
The most reliable steam trap known—the inverted bucket—provides efficient
condensate drainage of virtually all types of steam-using equipment. Put
the inverted bucket to work in a tough cast iron package, and you have the
best of both worlds. Because they operate efficiently for longer periods of
time, Armstrong cast iron inverted buckets add solid energy savings to lower
replacement/labor costs. All Armstrong cast iron inverted bucket steam traps
are repairable for even bigger maintenance savings.
A unique leverage system multiplies the force provided by the bucket to open
the valve against system pressure. The mechanism is free-floating, and has
no fixed pivots to create wear or friction.
Because the mechanism is located at the top of the trap, no dirt can collect
on the orifice. Small particles of dirt are held in suspension until discharged
by the full differential purging action when the bucket sinks, pulling the valve
off the seat.
The discharge orifice is surrounded by a water seal, preventing live steam
loss. Automatic air venting is provided by a small vent hole in the bucket, which
provides continuous automatic air and CO2 venting at steam temperature.
Inverted bucket traps drain continuously, although discharging intermittently,
allowing no condensate backup. They are also resistant to water hammer.
Screwed NPT and BSPT
Materials
Body:
Internals:
Valve and seat:
Test plug:
ASTM A48 Class 30
All stainless steel—304
Hardened chrome steel—17-4PH
Carbon steel
Options
• Stainless steel internal check valve
• Thermic vent bucket
• Stainless steel pop drain
• Probe connection
• Thermo drain
• Scrub wire
Specification
Inverted bucket steam trap, type ... in cast iron, with continuous air venting
at steam temperature, free-floating stainless steel mechanism, and discharge
orifice at the top of the trap.
How to Order
Maximum Operating Conditions
Maximum allowable pressure
(vessel design):
Maximum operating pressure:
Connections
250 psig @ 450°F (17 bar @ 232°C)
Model 814-816: 250 psig (17 bar)
Specify:
• Model number
• Size and type of pipe connection
• Maximum working pressure that will be encountered or orifice size
• Any options required
For a fully detailed certified drawing, refer to CD #1000.
814-816 Series Side Inlet, Side Outlet Traps. Add suffix “CV” to model number for internal check valve, “T” for thermic vent bucket.
Model No.
814
815
in
mm
in
mm
in
Pipe Connections
Test Plug
“A” (Flange Diameter)
“B” (Height)
“C” (Face-to-Face)
“D” (Bottom to CL Inlet)
78
mm
1, 1-1/4
25, 32
1, 1-1/4, 1-1/2, 2
25, 32, 40, 50
2, 2-1/2
50, 65
1
25
1-1/2
40
2
50
8
203
9
229
11-1/2
292
13-5/8
346
16-1/4
413
21-5/16
541
9
229
10-1/4
260
13
330
7-13/16
198
8-1/16
205
11
279
Number of Bolts
Weight lb (kg)
816
8
44 (20.0)
71 (32.2)
131 (59.4)
Designs, materials, weights and performance ratings are approximate and subject to change without notice. Visit armstronginternational.com for up-to-date information.
North America • Latin America • India • Europe / Middle East / Africa • China • Pacific Rim
armstronginternational.com
814-816 Series Inverted Bucket Steam Trap
214/814//24-DC/84DC
Cast Iron for
Horizontal Installation
215/815/25-DC
For Pressures to 250 psig (17 bar)...Capacities to 20,000 lb/hr (9,072 kg/hr
Model 815 Capacity
Steam Trapping and
Steam Tracing Equipment
Model 814 Capacity
216/816/26-DC
Model 816 Capacity
Designs, materials, weights and performance ratings are approximate and subject to change without notice. Visit armstronginternational.com for up-to-date information.
Next
North America • Latin America • India • Europe / Middle East / Africa • China • Pacific Rim
armstronginternational.com
79

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project