BEA GyroTech 300, 400, 500, LO-21, S, BodyGuard, DK-12, Eagle Door Operator Installation guide

Below you will find brief information for Door Operator GyroTech 300, Door Operator GyroTech 400, Door Operator GyroTech 500, Door Operator LO-21, Door Operator LO-21S, Door Operator BodyGuard, Door Operator DK-12, Door Operator Eagle. This document provides instructions for installing these doors, including information about wiring, setup, and troubleshooting. It also outlines safety guidelines and best practices for using these door operators. The information is designed to help you understand the functions and capabilities of these door operators.

PDF Download
Document
GyroTech 300, 400, 500, LO-21, LO-21S, BodyGuard, DK12 Installation Guide | Manualzz

Advertisement

Advertisement

Advertisement

Key Features

  • Easy installation
  • Safety features
  • Versatile application
  • Reliable performance
  • Clear instructions
  • Comprehensive troubleshooting guide
  • Compatibility with other door operators
  • Durable construction
  • Advanced technology
  • Customer support resources

Frequently Answers and Questions

What should I do when after troubleshooting a problem a satisfactory solution cannot be achieved?

Please call B.E.A., INC. for further assistance during Eastern Standard Time at 1-800-523-2462 from 8AM - 5PM.

Should I leave the door inoperable until satisfactory repairs can be made?

Yes, if a problem remains unresolved, you must wait for the following workday to call B.E.A. and leave the door inoperable until satisfactory repairs can be made.

What should the safety mode switch be in?

The safety mode switch should be in safety STD.

Where should I connect the LO-21 red and black wires?

Connect LO-21 red to (A) and black to (B) of the plug-in pins on the activation relay coil of control box.

What is the polarity when using DC voltage?

When using DC voltage, polarity must be respected: orange: (-) brown: (+)
Preparing document for printing…
0%