Motorschutzbügel
TRIUMPH Tiger 800/XC
Artikel-Nr.:
501.7505 00 01 schwarz
Montage
Der Bausatz umfaßt die folgenden Teile:
St. Bestellnr. Bezeichnung
1 700007468 Motorschutzbügel links
1 700007469 Motorschutzbügel rechts
5 150.838
1 150.780
6 150.810
Sechskantschraube M8 x 16
Inbusschraube M8 x 16
U-Scheibe ø8,4
Seitenkoffer
Topcases
Gepäckträger
Lock it System
Softbags
Aluminiumkoffer
Lederkoffer
Schutzbügel
Hauptständer
Chopper-Parts
Quad-Parts
Accessoires
Vorbereitung:
Die Kunststoffstopfen, mit denen die benötigten Gewinde verschlossen sind, entfernen.
2
1 1
Nach der Montage alle Verschraubungen auf festen Sitz kontrollieren!
Bitte beachten Sie unsere beigefügten Serviceinformationen.
Weiteres Zubehör:
Kofferträger
Gepäckbrücke
Art.-Nr. 650.7505 00 01 schwarz
Art.-Nr. 650.7505 01 01 schwarz
C-Bow Halter Art.-Nr. 630.7505 schwarz
Tankschutzbügel Art.-Nr. 502.7505 in schwarz
Hauptständer Art.-Nr. 505.7505 schwarz
Motorschutzplatte Art.-Nr. 502.7505 aluminium
Lampengitter Art.-Nr. 700.7505 schwarz
Weiteres Zubehör in Vorbereitung.
Hepco & Becker GmbH
An der Steinmauer 6
D-66955 Pirmasens
Tel.: 06331 - 1453 - 100
Fax: 06331 - 1453 - 120 eMail: [email protected]
www.hepco-becker.de
Packende Ideen.
1
Motorschutzbügel
TRIUMPH Tiger 800/XC
Artikel-Nr.:
501.7505 00 01 schwarz
Montage
Montage des Motorschutzbügels links unten:
Den Motorschutzbügel so über den nun freien Gewinden positionieren, dass man alle Schrauben ansetzen kann.
Zur Befestigung werden Sechskantschrauben M8 x 16mm mit U-Scheiben
Ø8,4 verwendet.
1
Seitenkoffer
Topcases
Gepäckträger
Lock it System
Softbags
Aluminiumkoffer
Lederkoffer
Schutzbügel
Hauptständer
Chopper-Parts
Quad-Parts
Accessoires
2x 2x
Montage des Motorschutzbügels links und rechts oben: mit den Sechskantschrauben
M8 x 16mm und U-Scheiben Ø8,4.
2
2x 2x
Montage des Motorschutzbügels rechts unten: wie linke Seite, jedoch wird für die
Befestigung hinten die Inbusschraube
M8 x 16mm und U – Scheibe Ø 8,4 verwendet.
Zur Befestigung vorne werden
Sechskantschrauben M8 x 16mm mit U-
Scheiben Ø8,4 verwendet.
3
1x 2x
1x
Packende Ideen.
2
Engine guard
TRIUMPH Tiger 800/XC
Item-No.:
501.7505 00 01 black
Assembling instructions
The kit includes the following parts:
Quant item no. description
1 700007468 Crash bar left
1 700007469 Crash bar right
5 150.838
Hexagon bolt M8 x 16
1 150.780
6 150.810
Allen screw M8 x 16
Washer ø8,4
Side cases
Top cases luggage frames
Lock it system
Softbags
Aluminium luggage
Leather luggage
Protection bars
Center stands
Chopper parts
Quad parts
Accessories
Preparing:
Dismantle the plastic plugs in the threaded holes which are used for mounting the crash bars.
2
1 1
Control all screw connections after the assembling for tightness!
Please notice our enclosed service information.
Also available:
Lock it side carrier No 650.7505 00 01 black
Alurack rear rack No. 650.7505 01 01 black
C-Bow holder
Tank guard
No. 630.7505 black
No. 502.7505 black
Hepco & Becker GmbH
An der Steinmauer 6
D-66955 Pirmasens
Germany
Center stand No. 505.7505 black
Engine protection plate No. 502.7505 aluminium
Headlight grilles No. 700.7505 black
More accessories are in progress.
Tel.: 06331 - 1453 - 100
Fax: 06331 - 1453 - 120 eMail: [email protected]
www.hepco-becker.de
Luggage ideas.
1
Engine guard
TRIUMPH Tiger 800/XC
Item-No.:
501.7505 00 01 black
Assembling instructions
Fastening of the crash bar left bottom: mount crash bar with hexagon bolts M8 x 16 and washers ø8,4 in the free threads.
1
Side cases
Top cases luggage frames
Lock it system
Softbags
Aluminium luggage
Leather luggage
Protection bars
Center stands
Chopper parts
Quad parts
Accessories
2x 2x
Fastening of the crash bar left+right top: mount crash bar with hexagon bolts M8 x 16 and washers ø8,4 in the free threads.
2
2x 2x
Fastening of the crash bar right bottom:
Front: with allen screw M8 x 16 and washer ø8,4 in the free thread.
Rear: with hexagon bolt M8 x 16 and washer ø8,4 in the free thread.
3
1x
1x
2x
Luggage ideas.
2