BEOVISION | AVANT | BeoVision Avant 32 DVD Set Up Guide - Free PDF Manual

BeoVision Avant 32 DVD Set Up Guide - Free PDF Manual
BeoVision Avant DVD
Guide
Contents of the Guide
To get to know your Bang & Olufsen product,
two guides are at your disposal.
The Guide
BeoVision Avant
BeoVision Avant
Guide
Reference book
The Reference
book
Introducing BeoVision Avant and
Beo4
4 Using the Beo4 remote control
5 Displayed information and menus
Watch television
To the right, you find the contents of this Guide.
The main chapters of the Reference book are
listed below:
• Set up your BeoVision Avant, 6
• Loudspeaker connections – surround
sound, 9
• Connect a set-top box, 13
• Connect a decoder, 14
• Connect other equipment, 15
• Connect audio and video systems, 16
• Distribute sound and pictures with
BeoLink, 17
• Set up BeoVision Avant in a link room, 18
• Register extra equipment, 20
6 Select a TV or Satellite channel
6 See a channel list
Satellite channels are only available if your
BeoVision Avant is equipped with the built-in
Satellite receiver module.
Turn the TV or adjust sound volume
7 Adjust viewing position
7 Adjust or mute the sound volume
Look up Teletext information
8 Main Teletext functions
• Tune in TV or Satellite channels, 22
• Add new TV or Satellite channels, 23
• Edit tuned TV or Satellite channels, 24
•
•
•
•
Set the time and date, 30
Set positions for Avant to turn to, 31
Adjust picture and sound settings, 32
Gain access to extra functions via
Beo4, 34
• Set your BeoCord V 8000 video tape
recorder preferences, 35
•
•
•
•
•
•
•
Daily operations, 36
Look up Teletext information, 38
Use the DVD player, 42
Home Theatre viewing, 48
See two sources at the same time, 50
The display bar, 51
Switch BeoVision Avant on or off
automatically, 52
• Use an integrated audio/video system, 54
• Use BeoVision Avant in a link room, 55
•
•
•
•
•
The socket panels, 56
Close-up operation, 58
Maintenance of your Avant, 60
The PIN-code system, 61
For your information…, 63
Get access to your favourite
Teletext pages
9 Store frequently read pages
9 Day-to-day use of memory pages
Use the DVD player
10
11
11
12
Load and play
While watching a DVD…
Play audio CD
The on-screen tool bar
Home Theatre viewing with
BeoVision Avant
13 Select speakers for movie sound
14 Make the picture fill out the screen
3
Introducing BeoVision Avant and Beo4
4
The Beo4 remote control gives you
access to all BeoVision Avant
functions. When a function is in use,
you are informed via displays on
Beo4 or on top of the television.
Switch on the television
Using the Beo4 remote control
Look through the basic principles of the Beo4
remote control and try them out. Each button
on Beo4 is explained below.
TV
TV
FORMAT
Switch on a Satellite channel. These channels are
only available if your BeoVision Avant is equipped
with the Satellite receiver module
Switch on a connected video tape recorder and
play a loaded tape
Switch on DVD and play a loaded disc
Press twice to start recording here and now
Select channels, DVD titles and chapters, a specific
DVD menu, or enter data in on-screen menus
Call up the main menu for access to channel lists,
timer play and timer stand-by menus, and setup
options. Press and hold to access the DVD tool bar
SAT
V TAPE
RECORD
Switch on connected audio sources
LIGHT
Adjust the room lights, if a light control system is
installed
RADIO
SAT
DVD
CD
TEXT
Switch on Teletext
V TAPE
RECORD
A TAPE
7
8
9
4
5
6
1
2
3
TEXT
0
MENU
Press to select a subtitle language for DVD*
0–9
MENU
Step between channels or chapters on a DVD or
move slowly forward and backward in pause mode;
move through menu options
Rewind or fast forward a videotape; move the
cursor from setting to setting in a fill-in menu or
cue back and forth during playback of a DVD
LIGHT
The Beo4 display shows the source you have
selected, or extra functions available when you
press the LIST button, e.g. FORMAT
RADIO
CD
A TAPE
DVD
TV
Refer to Gain access to extra functions via Beo4
on page 34 in the Reference book for information
about how to add extra functions to those shown
in the Beo4 display.
Press to bring up the DVD disc menu
Press to select another audio language for DVD*
Press to bring up the DVD on-screen tool bar
▲
▼
LIST
Reveal additional functions in the Beo4 display
window, e.g. FORMAT
STOP
Press to stop playback of a videotape or a disc;
press to stop recording; press to go from one
menu back to a previous menu
Exit all on-screen menus
GO
ss
tt
LIST
EXIT
STOP
Accept and store instructions or settings
GO
EXIT
Adjust sound volume; press the middle to mute the
sound
∧
∨
•
Switch BeoVision Avant to stand-by
*NOTE! Alternative subtitle and audio languages
are only available on some discs. Functions not
available on your disc will not be highlighted in
on-screen menus.
5
Displayed information and menus
Option menu
Menu
Information about selected sources is
displayed at the top of the screen. In addition,
on-screen menus allow you to switch on,
adjust or switch off additional functions.
1 Timer play
2 TV list
3 Setup
Source Pr Start
DVD
TV
12
VOL
30
TV
The selected source is shown until you
switch it off. Volume level is shown
while you adjust it, and disappears after
a few seconds.
Stop
Date
1 13:30 - 14:30 27 Oct OK
Press MENU for Timer index
Fill-in menu
How to use option menus…
▲ ▼
Press to move through the
GO
option menu and press GO to
enter your choice, or…
Menu
1 Timer play
2 TV list
3 Setup
1–9
Source Pr Start
TV
Stop
Date
1 13:30 - 14:30 27 Oct OK
Press MENU for Timer index
On-screen menus like those shown above will
give you either a vertical list of options to
choose from or a horizontal list of settings to
fill in.
…Use the number keys on
Beo4 to select a numbered
option on a list
How to use fill-in menus…
Press ▲ or ▼ to view your
▲ ▼
choices for a single setting in a
ss tt
fill-in menu, or ss and tt to
move from setting to setting
0–9
GO
Press the number keys on Beo4
to enter settings
Press to enter your choice
In both option and fill-in menus, you can press
STOP to go back to a previous menu, or EXIT to
leave all menus.
Watch television
6
The operations shown on these
pages are functions often used on a
daily basis:
– Choose a TV or Satellite channel
by its number;
– Switch to another channel or
source;
– Call a channel list up on the
screen;
– Adjust the sound volume;
– Adjust the position of BeoVision
Avant on its motorised stand.
For information about watching
DVD, refer to the chapter Use the
DVD player on page 10.
Select a TV or Satellite* channel
See a channel list
To watch a TV or Satellite channel, press the
appropriate button on Beo4. BeoVision Avant
switches on the last channel you watched.
All your TV and Satellite channels appear on
separate lists, which you can call up on the
screen. The lists contain channel numbers and
names, and can contain 99 TV channels and
119 Satellite channels.
While BeoVision Avant is turned off...
Press TV or SAT to switch on
TV
the source. The last channel
TV 2
viewed appears on the screen
0–9
▲
▼
Press a channel number to go
directly to that channel
TV
Press TV or SAT to switch on a
source
GO
Press and hold to call up a
channel list on the screen
ss
tt
Press to change channels one
by one
0–9
SAT
•
Press another source button at
any time to switch to that
source, e.g. SAT
Press to switch BeoVision Avant
to stand-by
▲
▼
GO
EXIT
Press to view the previous or
following page of the channel
list
To select a channel to watch,
press the channel number on
Beo4 or press ▲ or ▼ until the
cursor highlights the desired
channel
To switch on the chosen
channel, press GO, or press
EXIT to leave the menu
You can also call up the channel list by pressing
MENU to call up the main menu, and then
pressing either 2 or 3 to select the appropriate TV
or Satellite list.
*NOTE! Satellite channels are only available if
your BeoVision Avant is equipped with the
built-in Satellite receiver module.
Turn the TV or adjust sound volume
Adjust viewing position
You can turn the television on its built-in
motorised stand using your Beo4 remote
control.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
BBC 1
BBC 2
ITV
Super Ch
SKÝ
ZDF
Children
CNN
........
........
........
Eurosprt
........
........
MTV
Adjust or mute the sound volume
You can adjust or mute television sound at
any time while you are using a source.
While BeoVision Avant is turned on…
∧
Press either end of the button to
∨
adjust the volume up or down
Press the middle of the button
to mute the sound
LIST
STAND
ss
The TV channel list. Dotted lines indicate that a
channel has been stored, but not named. An
empty slot in the list indicates that no channel
has been stored there.
7
tt
0
1
2
Press LIST on Beo4 until STAND
is shown in the Beo4 display
window
Press to turn BeoVision Avant to
the left or right, or…
…press 0, 1 or 2 if you have
preset viewing positions for
your television
Please refer to ‘Set positions for BeoVision Avant
to turn to’ on page 31 in the Reference book for
more information about how to preset positions
for TV viewing.
∧
∨
Press either end of the button to
bring the sound back
Look up Teletext information
8
Teletext is an information system in
video form used by most
broadcasters to transmit news,
weather forecasts and other
information of general interest.
You can find information on Teletext
pages in three steps: switch on the
Teletext service, read the index page
to find the desired page number, and
call up the desired page.
With Beo4, you can step through
pages one by one or jump to a
particular page.
Main Teletext functions
The index on Teletext page 100 outlines the
major categories of Teletext information and
lists their page numbers to make information
easy to locate. For example, news may start
on page 110, sports on page 200 or TV listings
on page 300.
While the TV is turned on…
TEXT
Press to call up the Teletext
index page
0–9
▲
▼
Press the number of a Teletext
page you want to see
Press to move to the previous or
following page
STOP
If the current page contains
subpages, you can press STOP
to pause subpage turning
0–9
To view a particular subpage,
enter the four-digit code of the
desired page, or press ▲ or ▼
to step to the page
▲
▼
STOP
Press STOP again to resume
subpage turning
EXIT
Press to leave Teletext and
return to the source you were
using
A typical Teletext page. The current page
number, channel name, date and time appear at
the top of the screen, as well as a three-digit
number showing the progress of the page
search function.
Get access to your favourite Teletext pages
When you switch on Teletext,
BeoVision Avant provides instant
access to any page you wish to see,
any subpages linked to that page,
and also four memory pages for
storage of your most frequently
viewed Teletext pages.
This means that you can get e.g. the
latest news headlines, stock trends,
sports results or weather forecasts
quickly and easily.
Store frequently read pages
Day-to-day use of memory pages
Stored memory pages are the first to appear
when you call up Teletext on the screen, and
Beo4 makes it easy to move quickly from page
to page.
You may need to refer to your Teletext
memory pages quickly, e.g. if you are leaving
for work and wish to check traffic information
on a Teletext service.
While Teletext is active…
0–9
Press the number keys or ▲ ▼
▲
on Beo4 to go to a page you
▼
refer to often
LIST
STORE
GO
1–4
TV
SAT
Press to turn on a TV or Satellite
channel which offers a Teletext
service
TEXT
Press to switch on Teletext. The
page stored as memory page 1
appears automatically
ss
Press to view the other memory
pages
Press LIST on Beo4 until STORE
is shown in the Beo4 display
Press to select the current page
for storing
Enter the number of the
memory page to be used
GO
Press to store the page as a
memory page, or…
EXIT
…press to exit the STORE
function and return to Teletext
tt
To view stored memory pages from another
channel’s Teletext service, press EXIT on Beo4 to
return to channel viewing, press ▲ ▼ or the
channel number to change channels, and press
TEXT to switch on Teletext.
Please note that set-top box Teletext pages can be
viewed, but not stored as memory pages!
NOTE! If your BeoVision Avant is linked via a
BeoLink cable to another television, stored
memory pages will not be shared among linked
televisions. Memory pages must be stored
manually on all linked televisions.
9
Use the DVD player
Load and play
The DVD player’s on-screen tool bar
gives you access to additional
functions, such as camera angle or
subtitles as well as changing
chapters, etc., if these are available
on your disc. The tool bar informs
you of the current settings for these
functions as well.
LO
AD
Loading a disc in the DVD player is done via
the LOAD button on the close-up operation
panel on BeoVision Avant, just above the
television screen.
DV
BeoVision Avant allows you to play
DVDs, video CDs and audio CDs. All
operation of the DVD player, apart
from loading and unloading of a
DVD, is done via the Beo4 remote
control. Loading is done via the
LOAD button on top of the
television.
D
10
From the close-up operation panel…
> Press LOAD to open the DVD loader. The display
window prompts you to load a disc.
> Place a disc in the loader.
> Press LOAD and the loader closes.
> Press DVD to start playback of the disc*.
If the DVD player can not recognise the format of
a loaded disc, the disc is ejected and DVD LOAD is
shown in the display window. This may be due to
disc faults such as dust, dirt, fingerprints or
scratches. Refer to ‘Maintenance of your BeoVision
Avant’ on page 60 in the Reference book for more
information about handling DVDs.
*NOTE! For further instructions in the use of the
close-up operations panel, refer to the chapter
Close-up operation in the Reference book on
page 58.
The DVD loader will close automatically when
you turn off the television.
11
While watching a DVD…
Play audio CD
You can view still pictures from a DVD film,
cue back and forth, view playback in slow
motion, switch chapters or tracks and view a
DVD disc menu via the Beo4 remote control.
When it is convenient for you, use your
BeoVision Avant to play audio CDs.
To cue through a DVD…
Press the source button on
DVD
Beo4 to start playback of a disc
ss
tt
tt
GO
Press ss or tt to cue back and
forth during playback
To switch to a new chapter on a DVD…
Press ▲ or ▼ for the next or
▲ ▼
previous chapters
0–9
ss
tt
Press again to change speed
If you wish to resume playback
at a specific point from
cueing…
…press GO
To view a DVD disc menu…
GO
Press and hold GO until the disc
menu appears on the screen, or
press the yellow button
▲
STOP
Use the number keys to step
directly to a particular chapter
number
When an audio CD is loaded…
Press to start playback of the
GO
CD. The display writes DVD
DVD
1
along with the current track
number
Press to pause DVD playback
ss
tt
▼
To view DVD frames while playback is
paused…
▲ ▼
Press to move back and forth
through frames. Press again to
adjust the speed
GO
Press GO to resume playback
STOP
Or
Press STOP to stop playback
completely
GO
Use the arrow keys to move
from function to function on
the disc menu
Press to cue back and forth
during playback
1:20
The display shows the elapsed
time of the track, e.g. 1 minute
and 20 seconds
▲ ▼
Press to change between tracks
0–9
Use the number keys to step
directly to a track
STOP
Press once to pause playback of
the CD…
STOP
…press twice to stop playback
completely
Press GO to enter your choice
NOTE! If you restart playback after a pause of
less than half an hour, BeoVision Avant will
prompt you to resume playback at the point of
interruption. A window on the screen shows
RESUME. Press GO to resume playback. If you do
not press GO, playback begins from the
beginning of the disc. This is also the case if the
playback pause lasts longer than half an hour.
>> Use the DVD player
12
The on-screen tool bar
The DVD player functions are accessible via a
tool bar along the top of the screen. Change
chapters or titles, subtitles or camera angles.
Zoom in on a part of the screen picture or cue
backward and forward on a disc.
1
1
1
off
1
no
off
st
1
1
1
1
no
off
To view the on-screen tool bar…
> Press MENU and select the menu option DVD
during playback to view the tool bar, or press
the blue button.
> Press ss or tt to move through the functions.
Pressing tt repeatedly reveals additional
functions.
> Press ▼ or ▲ to view your setting choices and
press GO to enter a choice.
> Press MENU – or the blue button again, to
deactivate the tool bar.
Tool bar symbols
Personal preferences menu
Title or track number
Chapter number
Playback language
Subtitle language
Camera angle
Zoom
The Feedback window
Alternate camera angle in use. This is a
disc feature which is only available on
certain DVDs.
resume
Playback of a DVD resumes from the
point where playback was previously
interrupted.
Favourite Track Selection
Sound settings
Still mode
Slow motion
Cue forward or backward
Time search
Action is not valid. The symbol will
appear if e.g. you attempt to bring up
the tool bar during an obligatory trailer
sequence before a DVD movie.
Home Theatre viewing with BeoVision Avant
Extend your system into a fully
equipped Home Theatre system by
connecting four Bang & Olufsen
loudspeakers and a BeoLab 2
subwoofer*.
When you switch on one of your
sources in your BeoVision Avant, the
speakers which you may have in a
surround sound system can be cut in
or out, depending on what kind of
sound you prefer for the source you
are using.
BeoVision Avant may switch on a
speaker combination automatically.
This happens if e.g. a broadcasted
program or DVD contains
information about the number of
speakers to be switched on. You are
still free to choose the speaker setup
you prefer.
Select speakers for movie sound
While you are watching a movie or program,
you can choose the speaker combination you
wish to switch on, provided that the various
sound modes are available in your system.
LIST
SPEAKER
Press LIST until SPEAKER is
shown in the Beo4 display
1–5
Press the number of the speaker
option you want. The speakers
selected will cut in automatically
▲
If you want to adjust the sound
balance for the program you
are watching, press ▲ or ▼ to
adjust the balance between the
external front and rear speakers,
and press ss or tt to adjust the
balance between the left and
right speakers
▼
ss
tt
EXIT
Press EXIT to remove SPEAKER
from the Beo4 display and to
return to the source you were
using
Speaker combinations
SPEAKER 1
Stereo sound in BeoVision Avant speakers only.
For programs with dialogue, e.g. TV news.
SPEAKER 2
Stereo sound in the two external front speakers.
For music CDs.
SPEAKER 3
BeoVision Avant speakers and external front
speakers are active. For TV programs in stereo.
SPEAKER 4
Enhanced stereo sound in the external front and
rear speakers. For music CDs or tapes.
SPEAKER 5
Surround sound from all speakers. For programs
in Dolby Surround Sound.
If you have connected only two external front
speakers to BeoVision Avant, you will only be able
to choose SPEAKER 1–3.
*NOTE! Refer to Loudspeaker connections –
surround sound on page 9 in the Reference book
for more information about how to connect
loudspeakers to BeoVision Avant.
13
>> Home Theatre viewing with BeoVision Avant
14
Make the picture fill out the screen
BeoVision Avant always ensures you the best
possible picture. It automatically adapts the
picture so that it fills out as much of the
screen as possible. However, you can still
choose a preferred format for Home Theatre
viewing.
To choose a format...
LIST
Press LIST on Beo4 until FORMAT
FORMAT
is shown
GO
1–3
▲
▼
▲
▼
EXIT
Press if you want BeoVision
Avant to optimise the picture,
otherwise…
…press the number of the
desired picture format
If you have chosen Format 1,
press ▲ or ▼ to select variations
of this format
Picture formats to choose from
FORMAT 1
For standard TV pictures, as shown to the right.
Three variations are available: 15:9 (for the
largest picture), 14:9 and 4:3 (for standard
picture format).
FORMAT 2
For letter-box pictures.
FORMAT 3
For 16:9 wide-screen pictures. FORMAT 3 will
usually be selected automatically. If this is not
the case, you can select it yourself.
If you have chosen Format 2,
press ▲ or ▼ to move the
picture up and down
Press to leave the FORMAT
function
The illustration at the top shows the BeoVision
Avant standard picture format, which is a 15:9
format. The overlapping illustrations above
show what happens to a letter-box picture
when you choose format 2. The picture is
adapted to fill out more of the screen.
3508468
0109
Printed in Denmark by Bogtrykkergården a-s, Struer
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising