Ampeg | HERITAGE SVT-410HLF | Owner`s manual | Ampeg HERITAGE SVT-410HLF Owner`s manual

Ampeg HERITAGE SVT-410HLF Owner`s manual
?\i`kX^\
JMK$+('?C=
JMK$/('<
9Xjj>l`kXi:XY`e\kj
Owner’s Manual
Heritage Bass Guitar Cabinets
SVT-410HLF / SVT-810E
TABLE OF CONTENTS
Important Safety Instructions..................................................2
Introduction...........................................................................4
Eminence Speakers / Impedance: The Golden Rule..................5
Heritage SVT-410HLF Jackplate..............................................6
Heritage SVT-410HLF Hookup Diagrams..................................7
Heritage SVT-410HLF Tech Specs / Service Information...........8
Heritage SVT-810E Jackplate..................................................9
Heritage SVT-810E Hookup Diagrams...................................10
Heritage SVT-810E Tech Specs / Service Information.............11
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions. 2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Only use attachments/accessories specified by
the manufacturer.
10. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as
liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed
to rain or moisture, does not operate normally, or
has been dropped.
11. This apparatus shall not be exposed to dripping or splashing, and no object filled with
liquids, such as vases or beer glasses, shall be
placed on the apparatus.
2
Exposure to extremely high noise levels may
cause permanent hearing loss. Individuals vary
considerably in susceptibility to noise-induced
hearing loss, but nearly everyone will lose some
hearing if exposed to sufficiently intense noise
for a period of time. The U.S. Government’s
Occupational Safety and Health Administration
(OSHA) has specified the permissible noise level
exposures shown in the following chart.
According to OSHA, any exposure in excess
of these permissible limits could result in some
hearing loss. To ensure against potentially dangerous exposure to high sound pressure levels, it is recommended that all persons
exposed to equipment capable of producing high
sound pressure levels use hearing protectors
while the equipment is in operation. Ear plugs or
protectors in the ear canals or over the ears must
be worn when operating the equipment in order to
prevent permanent hearing loss if exposure is in
excess of the limits set forth here:
Duration, per
day in hours
8
6
4
3
2
1.5
1
Sound
Level dBA, Slow
Response
90
92
95
97
100
102
105
0.5
0.25 or less
110
115
Typical Example
Duo in small club
Subway Train
Very loud classical music
The boss screaming at his minions about
manual deadlines
Loudest parts at a rock concert
Heritage Bass Guitar Cabinets
SVT-410HLF / SVT-810E
CONSIGNES DE SECURITE IMPORTANTES
- LIRE, SUIVRE TOUTES LES INSTRUCTIONS ET LES PRECAUTIONS D’UTILISATION
- NE PAS UTILISER PROCHE D’UNE SOURCE DE CHALEUR ET NE PAS BLOQUER OU OBSTRUER LE
SYSTEME DE VENTILATION SUR CET APPAREIL. POUR UNE UTILISATION CONFORME, CET APPAREIL
NECESSITE ENVIRON 7CM D’ESPACE BIEN VENTILE AUTOUR DE SON SYSTEME DE REFROIDISSEMENT,
AINSI QU’UN COURANT D’AIR FRAIS CONSTANT
- NE PAS UTILISER CET APPAREIL PROCHE D’UNE SOURCE LIQUIDE
- NETTOYER SEULEMENT A L’AIDE D’UN CHIFFON DOUX ET SEC ET NE PAS UTILISER DE PRODUITS
MENAGERS
- CONNECTER UNIQUEMENT LE CABLE D’ALIMENTATION FOURNI SUR UNE PRISE AVEC MISE A LA
TERRE, ET COMPATIBLE AVEC LA TENSION, L’INTENSITE ET LA FREQUENCE REQUISES INDIQUEES SUR
LA FACE ARRIERE DE L’APPAREIL
- S’ASSURER DE NE PAS MARCHER, PLIER OU TIRER SUR LE CABLE D’ALIMENTATION
- DEBRANCHER L’APPAREIL LORS D’UNE TEMPETE OU LORS D’UNE TRES LONGUE PERIODE DE NON
UTILISATION
- UTILISER UNIQUEMENT DES ACCESSOIRES SPECIFIES PAR LE FABRICANT POUR UNE UTILISATION EN
TOUTE SECURITE ET POUR EVITER DES BLESSURES
- ATTENTION: AFIN DE PREVENIR TOUT RISQUE DE CHOCS ELECTRIQUES OU DE DEBUT D’INCENDIE,
NE PAS EXPOSER CET APPAREIL A LA PLUIE ET A L’HUMIDITE
- TOUT ENTRETIEN DOIT ETRE FAIT PAR UN TECHNICIEN QUALIFIE
- NOS AMPLIFICATEURS PEUVENT PRODUIRE DE TRES HAUTES PRESSIONS ACOUSTIQUES QUI
PEUVENT CAUSER DES DOMMAGES AUDITIFS PERMANENTS OU DEFINITIFS. L’UTILISER AVEC UNE
GRANDE PRECAUTION EST CONSEILLE ET DES PROTECTIONS AUDITIVES SONT RECOMMANDEES POUR
UNE UTILISATION A FORT VOLUME.
- ATTENTION: CET APPAREIL REQUIERT UNE PRISE MURALE AVEC MISE A LA TERRE, AUX NORMES
ACTUELLES ET COMPATIBLE AVEC LES SPECIFICATIONS ELECTRIQUES SE TROUVANT EN FACE ARRIERE
DE L’APPAREIL. LA PRISE ELECTRIQUE DOIT RESTER ACCESSIBLE POUR DEBRANCHER L’APPAREIL EN
CAS DE DEFAUT PENDANT L’UTILISATION
- CET APPAREIL DOIT ETRE DEBRANCHE SI IL N’EST PAS UTILISE
Elimination correcte du produit : Ce symbole indique que ce produit ne doit pas être éliminé avec les
ordures ménagères, comme le prévoiT la directive WEEE (2002/96/EC) et votre loi nationale.
Ce produit doit être remis à un site de recyclage des déchets électriques et des équipements électroniques (EEE).
Un mauvais recyclage de ce type de déchet peut avoir de possibles impacts négatifs sur l’environnement
et la santé humaine dus aux émanations de substances.
Dans un même temps, votre coopération à un recyclage correct de ce produit contribuera à la bonne utilisation des ressources naturelles.
Pour connaître l’endroit où il est possible de recycler ces équipements, merci de contacter votre mairie,
les services de recyclages ou le service des déchets ménagers.
Correct disposal of this product: This symbol indicates that this product should not be disposed of with your household waste,
according to the WEEE directive (2002/96/EC) and your national law. This product should be handed over to an authorized collection site for recycling waste electrical and electronic equipment (EEE). Improper handling of this type of waste could have a
possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the effective usage
of natural resources. For more information about where you can drop off your waste equipment for recycling, please contact your
local city office, waste authority, or your household waste disposal service.
3
Heritage Bass Guitar Cabinets
SVT-410HLF / SVT-810E
Introduction
Welcome to the world of Ampeg. Whether this is your first experience with Ampeg or you’re a
well-seasoned player who’s been around the globe a few times with our gear, you are taking
part in a piece of musical history. From here on out, nothing else will sound the same...
everything else will pale in comparison. You are one of the lucky few to take part in a new
chapter of an American legacy. Ampeg has come home! Each Heritage Series amplifier and
cabinet is designed and assembled right here in the U.S.A. We’ve heard from bass players
around the globe about their dedication and commitment to Ampeg and the Heritage Series
is made specifically for those players. Just our way of saying thank you and letting you know
that we heard you loud and clear.
Ampeg is the standard by which all others are measured. We’ve been pounding bass player’s
chests and audience’s booties for over 60 years now and we’re not going to slow down anytime soon. From our early days of building “amplified pegs” for upright players to building
the world famous, stadium rattling SVT, Ampeg has been the choice for bassists, from touring
professionals to weekend warriors and everyone in between. We were the first ones on the
block listening and building gear for bass players. Heck, even our company’s founding fathers
were working, gigging players. When they weren’t tinkering around the shop on new ideas,
they were out in the clubs of New York earning their living. Not much has changed since then.
The average length of a hit song is 3 minutes and 40 seconds. We have been a part of most
of those hits for over 60 years. Now that you own a piece of Ampeg history, we want to be a
part of your next hit.
On a personal note, the team at Ampeg would sincerely like to thank you for your support
and dedication to our mission in bringing you some of the best amps and cabs the world has
known.
Best of luck in all of your musical endeavors!
Sincerely,
The dedicated team at Ampeg
4
Heritage Bass Guitar Cabinets
SVT-410HLF / SVT-810E
Eminence Speakers
There are some relationships that go hand in hand in the music business. When it comes to
building amplifiers and cabinets, nothing is more suited than the relation between Ampeg and
Eminence Speakers. Ampeg commissioned Eminence Speakers decades ago to build one of
the first 18” speakers used in an Ampeg amplifier. We’ve been calling on Eminence ever since
to custom build speakers used in some of our most famous models. From the SVT-410HLF
and stadium rattling SVT-810E to the latest Heritage and Pro Neo Series, Eminence is at the
heart and soul of our most loved cabinets! It’s no secret what goes into building a great cabinet: innovative designs, superb materials and world class components.
INSIDE
Impedance: The Golden Rule
When it comes to tube amps, be sure that the output impedance of the amplifier matches the
total impedance of the speaker cabinet or cabinets.
5
Heritage Bass Guitar Cabinets
SVT-410HLF / SVT-810E
SVT-410HLF Jackplate
4
5
3
6
2
7
4 OHMS
500W RMS/1000 PEAK
IMPEDANCE:
POWER:
WARNING: THIS SPEAKER IS CAPABLE OF PRODUCING
SOUND PRESSURE LEVELS (SPL) WHICH CAN CAUSE
HEARING IMPAIRMENTS OR LOSS. EAR PROTECTION
IS RECOMMENDED
8
9
10
1
11
12
0
16
8
I N P U T S
PIN 1+ = POS(+)
PIN 1- = NEG(-)
1
2
-db
LEVEL CONTROL
3
1: 1/4” Input / Output Jacks
2: Speakon® Input / Output Jacks
3: High Frequency Horn Level Control
Speakon® to 1/4” Wiring Diagram:
11+
6
1-
1+
Heritage Bass Guitar Cabinets
SVT-410HLF / SVT-810E
SVT-410HLF Suggested Hookup Diagrams
1
2
In the first example, a speaker cable with 1/4” ends connects from one speaker output of the amplifier to the
speaker input of the Ampeg Heritage SVT-410HLF cabinet. An additional cabinet may be connected by attaching another speaker cable from the remaining 1/4” speaker output of the amplifier to a speaker input of
the next cabinet.
The second example is not as common, but it also works. Plus, it is great for daisy-chaining multiple cabinets.
You may connect a speaker cable with 1/4” or Speakon® ends from one speaker output of the amplifier to the
speaker input of the Ampeg Heritage SVT-410HLF cabinet. An additional cabinet may be connected by attaching
another speaker cable from an open jack (thru) to the input jack of the next cabinet. Multiple cabinets may be
daisy-chained this way.
WARNING: Always use good quality (non-shielded) speaker cables. Never use (shielded) instrument cables to
connect speakers to an amplifier. Also, do not use both cable routes listed in example #2 above. Use one route
or the other, but not both!
7
Heritage Bass Guitar Cabinets
SVT-410HLF / SVT-810E
Heritage SVT-410HLF TECHNICAL SPECIFICATIONS
Type
4x10 Bass Enclosure
Frequency Response (+/–3 dB)
48 Hz – 18 kHz
Usable Low Frequency (–10 dB)
28 Hz
RMS Power Handling
Peak Power Handling
500 watts
1000 watts
Impedance
4 ohms
Sensitivity
98 dB SPL 1w/1m
Maximum SPL
125 dB
Components
4 Custom Designed Eminence 125 watt 10” speakers
1 Eminence HF Driver
Size (H x W x D)
24.0 in/610 mm (with feet) x 30.0 in/762 mm x 19.0 in/483 mm
Weight
76 lb/34.47 kg (approximately)
Speakon is a registered TM of Neutrik AG
Eminence® is a registered TM
®
The Heritage SVT-410HLF is covered with a durable fabric-backed vinyl material. Clean with a dry lint-free cloth. Never spray cleaning agents on the Heritage SVT-410HLF. Avoid abrasive cleansers
which would damage the finish.
Ampeg continually develops new products and improves upon existing ones. For this reason, the specifications
and information in this manual are subject to change without notice.
“Ampeg” is a registered trademark of LOUD Technologies Inc. All other brand names mentioned are trademarks
or registered trademarks of their respective holders and are hereby acknowledged.
Service Information
If you are having a problem with your Heritage SVT-410HLF cabinet, you can go to our website (www.ampeg.com) and click on Support for service information, or call Technical Support at
1-800-898-3211 Monday-Friday during normal business hours, PST, to receive assistance. If
you are outside of the U.S., contact your local distributor for technical support and service.
8
Heritage Bass Guitar Cabinets
SVT-410HLF / SVT-810E
SVT-810E Jackplate
1
4X10-DUAL MODE ONLY
4X10-DUAL MODE
-orMONO INPUTS
2
POWER HANDLING:
800W RMS (MONO)
400W RMS (DUAL)
3
PIN 1+ = POS (+)
PIN 1- = NEG (-)
IMPEDANCE:
4 OHMS (MONO)
8 OHMS (DUAL)
1: 1/4” Upper 4x10 Dual Mode Input Jack
2: 1/4” Lower 4x10 Dual Mode or Mono Mode Input / Output Jacks
3: Speakon® Lower 4x10 Dual Mode or Mono Mode Input / Output Jacks
The cabinet operates in Dual Mode whenever a connector is inserted into the
1/4” Upper 4x10 Dual Mode input jack [1]. Otherwise, the cabinet operates in
the single 8x10 Mono Mode.
Speakon® to 1/4” Wiring Diagram:
11+
1-
1+
9
Heritage Bass Guitar Cabinets
SVT-410HLF / SVT-810E
SVT-810E Suggested Hookup Diagrams
1
Combined (Mono)
2
Split (Dual)
In the first example, a speaker cable with 1/4” or Speakon® ends connects from the speaker output of the amplifier to the speaker input of the Ampeg Heritage SVT-810E cabinet.
In example number two, a speaker cable with 1/4” ends connects from the speaker output of the amplifier
to the speaker input of the Ampeg Heritage SVT-810E cabinet. An additional speaker cable with 1/4” ends connects from the speaker output of another amplifier to the speaker input of the Ampeg Heritage SVT-810E
cabinet’s 1/4” Upper 4x10 Dual Mode Input Jack. This allows two amplifiers to separately drive each 4x10 section of the full cabinet.
WARNING: Always use good quality (non-shielded) speaker cables. Never use (shielded) instrument cables to
connect speakers to an amplifier. Also, do not use both cable routes in the first example listed above. Use one
route or the other, but not both!
10
Heritage Bass Guitar Cabinets
SVT-410HLF / SVT-810E
Heritage SVT-810E TECHNICAL SPECIFICATIONS
Type
8x10 / Dual 4x10 Bass Enclosure
Frequency Response (+/–3 dB)
58 Hz – 5 kHz
Usable Low Frequency (–10 dB)
40 Hz
RMS Power Handling
Combined / Mono Mode: 800 watts 8x10
Split / Dual Mode: 400 watts each 4x10
Peak Power Handling
Combined / Mono Mode: 1600 watts 8x10
Split / Dual Mode: 800 watts each 4x10
Impedance
Combined / Mono Mode: 4 ohms 8x10
Split: 8 ohms each 4x10
Sensitivity
Combined / Mono Mode: 100 dB SPL 1w/1m
Maximum SPL
130 dB
Components
8 Custom Designed Eminence 100 watt 10” speakers
Size (H x W x D)
48.0 in/1219 mm (with feet) x 26.0 in/660 mm x 16.0 in/406 mm
Weight
137 lb/62.14 kg (approximately)
Speakon® is a registered TM of Neutrik AG
Eminence® is a registered TM
The Heritage SVT-810E is covered with a durable fabric-backed vinyl material. Clean with a dry lint-free cloth. Never spray cleaning agents on the Heritage SVT-810E. Avoid abrasive cleansers which
would damage the finish.
Ampeg continually develops new products and improves upon existing ones. For this reason, the specifications
and information in this manual are subject to change without notice.
“Ampeg” is a registered trademark of LOUD Technologies Inc. All other brand names mentioned are trademarks
or registered trademarks of their respective holders and are hereby acknowledged.
Service Information
If you are having a problem with your Heritage SVT-810E cabinet, you can go to our website (www.ampeg.com) and click on Support for service information, or call Technical Support at
1-800-898-3211 Monday-Friday during normal business hours, PST, to receive assistance. If
you are outside of the U.S., contact your local distributor for technical support and service.
www.ampeg.com
©2009 LOUD Technologies Inc.
16220 Wood-Red Road NE • Woodinville, WA 98072
Part No. SW0820 Rev. A 12/09
11
POWER HANDLING:
800W RMS (MONO)
400W RMS (DUAL)
PIN 1+ = POS (+)
PIN 1- = NEG (-)
IMPEDANCE:
4 OHMS (MONO)
8 OHMS (DUAL)
\^Xk`i\?
=C?'(+$KMJ
<'(/$KMJ
INSIDE
jk\e`YX:iXk`l>jjX9
launaM s’renwO
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising