Beflexx 230 volt vacuum cleaner Installation and user instructions

Beflexx 230 volt vacuum cleaner Installation and user instructions

Below you will find brief information for vacuum cleaner 230 volt. The Beflexx vacuum system is designed to remove normal household dust and dirt out of your vehicle. It must be connected to 230 volts, 3.5 amps. Do not vacuum clean fluids/moist/damps/gasses/burning or smoking materials. Do not use while the vehicle is in motion, so while driving or boating.

advertisement

Assistant Bot

Need help? Our chatbot has already read the manual and is ready to assist you. Feel free to ask any questions about the device, but providing details will make the conversation more productive.

Beflexx vacuum cleaner 230 volt Installation and user instructions | Manualzz

Beflexx vacuum cleaner 230 volt

Installation and user instructions

This manual covers the installation of the Beflexx vacuum cleaner in your vehicle, according to Body Builder Guidelines. It also provides the necessary information for regular maintenance and troubleshooting in the unlikely event that it will be needed. For further information please contact your local authorized distributor. When using any electric appliance, basic precautions should be followed, including the following. Read all instructions before using this vacuum cleaner system. Use only as described in this manual.

The Beflexx vacuum system is designed and manufactured to remove normal household dust and dirt out of your vehicle and must be connected to 230 volts, 3.5 amps nom. Do not vacuum clean fluids/moist/damps/gasses/burning or smoking materials. Do not use while the vehicle is in motion, so while driving or boating.

The unit has to be given proper maintenance. It is advisable to periodically check the filter and clean as required by air or replacement of the filter when it is dry. After use of five vacuum bags it is advised to replace the filter. A full dust bag must be replaced (dry). When returning parts, the shipping and packaging costs come on behalf of the sender.

Do not use the Beflexx vacuum cleaner without dust bag or filter in place. Make sure that the filter is clean, in order to avoid motor overheating. Dirty filters have to be replaced immediately. In case of overheating, the motor will shut down automatically. This Thermal Cutoff will take 10-25 minutes.

Check fuse in case of loss of power supply. Avoid blocking the ventilation outlets, motor unit and pipes. Inadequate ventilation will make the engine overheat. Install the motor unit with at least one side 10 cm from the floor/ceiling/wall etc.. Do not use the system if one or more openings are blocked.

Warranty has to be negotiated with the distributor. This warranty covers the electrical components and manufacturing defects and does not cover seals, filters and cables. The warranty only applies under normal household use and regular maintenance of the Beflexx vacuum system.

The warranty does not cover any damages to motor units without serial number or if the serial number can not be read; damage caused by improper use or normal wear of the product; damage after repair with non-original parts or damage that has been repaired by an unauthorized person. For more information or to order parts, go to www.beflexx.com.

Enjoy the ride in your vehicle cleaned by Beflexx!

Dimensions Beflexx motor unit 17 X 17 X 28 cm.

advertisement

Key Features

  • Removes household dust and dirt
  • Designed for vehicle use
  • 230-volt operation
  • Includes thermal cutoff for overheating protection
  • Requires regular filter maintenance
  • Warranty covers electrical components and manufacturing defects
  • Dimensions: 17 x 17 x 28 cm
  • Operates with dust bags and filter

Frequently Answers and Questions

Can I use the Beflexx vacuum cleaner on fluids or damp surfaces?
No, the vacuum cleaner is designed for dry surfaces only. Do not vacuum clean fluids/moist/damps/gasses/burning or smoking materials.
What happens if the motor overheats?
The motor will shut down automatically due to a thermal cutoff feature. Allow the unit to cool for 10-25 minutes before restarting.
What is covered under the warranty?
The warranty covers electrical components and manufacturing defects. It does not cover seals, filters, cables, or damage caused by improper use or normal wear.
How often should I replace the filter?
Replace the filter after using five vacuum bags or when it is dirty. Always make sure the filter is clean to avoid motor overheating.

Related manuals

Download PDF

advertisement