Datasheet | Blaupunkt CDC A01 Technical data

Version: 04.12.2006 Bluetooth USB Interface 7 607 545 500 FAQ

FAQ (Frequently Asked Questions) for the Bluetooth Interface 7 607 545 500

Further information is available at http://www.blaupunkt.com

in the FAQ search engine http://emsss.blaupunkt.de/ .

To simplify your search, we have sorted the questions into the following categories:

1. Installation .......................................................................................................................... 6

How do I obtain information on my Bluetooth interface?.............................................................................................6

What data are contained in the ID.TXT file? ...............................................................................................................6

When is the ID.TXT created? ......................................................................................................................................7

Why does my interface not create a file in the BLAUPUNKT directory on my USB stick? .........................................9

Can I also connect the Bluetooth interface to an OEM radio manufactured by Blaupunkt? .....................................10

2. General information .......................................................................................................... 11

What do the interface's status messages mean? (*TXT) ..........................................................................................11

Can I connect two Bluetooth devices at the same time for hands-free telephoning and audio streaming? .............14

Can I display more than 7 characters from the Bluetooth interface? During MP3 playback from internal drives (e.g.

CD, DVD, MemoryCard, ...) my car radio displays the information using more than 7 characters on the display. ..14

Can I change the scroll speed of long texts? (*TXT).................................................................................................15

What do I need a configuration file for?.....................................................................................................................15

What happens if I do not delete the SETUP.HEX file? .............................................................................................16

How can I reactivate my "seized up / crashed" interface? ........................................................................................16

During MP3 playback, why do I sometimes not hear any music for one second from the interface?.......................17

3. Bluetooth (BT) operation................................................................................................... 18

Can I play copy-protected MP3 files via Bluetooth?..................................................................................................18

Why does the voice dialling feature of my mobile phone not work sometimes or at all with the Bluetooth interface?

...................................................................................................................................................................................18

Why does the pairing of my mobile phone with the Bluetooth interface not work sometimes or at all? ...................19

Which functions can I control from the car radio during audio streaming? ...............................................................19

What do the track numbers mean that are displayed on the car radio's display during BT streaming? ...................20

Why does my mobile phone no longer connect automatically after a SW update has been performed?.................21

Which functions of the interface are possible in which radio mode?.........................................................................21

How can I access the phone book on my mobile phone via the interface? ..............................................................23

How long does it take to copy the phone book from the mobile phone onto the interface? .....................................25

How many phone books are stored on the interface?...............................................................................................26

How do I recognise an incoming call?.......................................................................................................................26

How long does it take to establish a connection? .....................................................................................................27

What are the differences in the Bluetooth wireless connection between hands-free operation and audio streaming?

...................................................................................................................................................................................28

How can I deactivate an active Tel. Mute?................................................................................................................29

How can I check whether my mobile phone is connected to the interface? .............................................................29

What effect does a nearly empty mobile phone battery have on Bluetooth operation?............................................31

4. USB operation ..................................................................................................................32

Can I play copy-protected MP3 files from USB devices?..........................................................................................32

Are playlists supported? ............................................................................................................................................32

In what order are MP3 files played?..........................................................................................................................32

What happens to non-MP3 files on the USB stick?...................................................................................................34

Why isn't the full MP3 file name / title displayed in my radio's display? (*TXT) ........................................................34

Why is my USB stick not detected by the interface?.................................................................................................34

Are USB card readers detected by the interface?.....................................................................................................35

Is the playback position stored when the radio is switched off?................................................................................35

How should I organise my playlists and MP3 files on the USB stick?.......................................................................36

How do I recognise a USB MSD (Mass Storage Device)? .......................................................................................37

Please understand that despite careful analyses and editing, Blaupunkt is unable to guarantee that these FAQ pages are complete and free from errors.

Page 1 / 23


Can the interface play other file formats other than MP3, e.g. WMA, AAC, OGG? ..................................................37

How are track numbers greater than 99 displayed? .................................................................................................38

5. Software update................................................................................................................40

Can I update my interface's software? ......................................................................................................................40

Why does my software update abort?.......................................................................................................................41

What do the entries in the SETUP.LOG file mean? ..................................................................................................41

How can I see the progress of a software update or find out if it has completed?....................................................41

What do the indicators on the car radio's display mean during the software update?..............................................41

Why do I not see a progress indicator on the car radio's display during the software update? ................................41

When is the SETUP.LOG file created? .....................................................................................................................41

How can I

exit the boot loader manually? ..................................................................................................................41

How do I find out the version of my boot loader? ......................................................................................................41

6. Device-specific FAQ (Radio / RNS) .................................................................................. 41

Casablanca CD50 .....................................................................................................................................................41

How can I

store the playback position when switching off the radio? ....................................................................41

TravelPilot E "Freestyler"...........................................................................................................................................41

When is the new software active after a software download?...............................................................................41

TravelPilot E Rome NAV55E.....................................................................................................................................41

How do I access MD

mode?...................................................................................................................................41

Why does my Rome NAV55E sometimes not display MD mode despite the MD configuration being present? ..41

7. Device-specific FAQ (mobile phone) ................................................................................ 41

Nokia mobile phones with voice dialling....................................................................................................................41

When does voice dialling work? ............................................................................................................................41

Nokia 6230i................................................................................................................................................................41

How can I deactivate "PHONE" again after the first received and ended call?.....................................................41

Benq-Siemens x75 ....................................................................................................................................................41

Why are Benq-Siemens x75 models NOT enabled for audio streaming?.............................................................41

SonyEricsson K800i ..................................................................................................................................................41

How do I start streaming from the mobile phone's media player?.........................................................................41

How do I start streaming after a received phone call? ..........................................................................................41


Page 2 / 23


Key:

No.

Q / A

Question / Answer

Applies to HW

Applies to app. SW

Applies to BL SW

Serial number of the question / answer

Label: Q = Question, A = Answer, S = Service info (for experts)

Question text / answer text

The versions of the hardware to which this answer applies

The versions of the application software to which this answer applies

The versions of the boot-loader software to which this answer applies

Blaupunkt aftermarket radio navigation systems (RNS) from year of manufacture 2002 that permit control of a CD changer (CDC) and that are equipped with Tel. Mute and Tel. In.

USB hard disk (USB-HD)) that behaves in accordance with the "USB Mass Storage Device" specification when connected to a USB port.

3. In those cases where text messages appear on the car radio's display, this requires a car radio model that actually supports such text displays via its CD changer interface (disk naming, "CDC Text").

4. For the FAQs in this list, it is generally assumed that your Bluetooth USB interface is already connected to the car radio via the blue and green plugs. Information on this is available in the installation instructions .

*TXT This function is only supported by car radios that support the "Disk Naming" feature ("CDC text").

History:

Date Name Changes

Revision status 6 Sept. 2006, distributed to all parties involved 06.09.2006 Fischer

11.09.2006 Fischer

12.09.2006

28.09.2006

Fischer

Fischer

12.10.2006 Fischer

New: Key 4, A01 NO TEL, B14, H02, H05

Changes: B04, U12, new: A06, A07, B15, B16

Changes: U10, S05, S10, R04, editorial revision


Page 3 / 23


1. Installation

No. Q

/

A

Question / Answer

E01 Q

How do I obtain information on my Bluetooth interface?

software update instructions )

• Plug the USB stick into the USB port of your Bluetooth interface

• Switch on your car radio and wait approx. 30 seconds

• Switch off your car radio

• Unplug the USB stick

• Using a text editor (e.g. Notepad) on your PC, open the

BLAUPUNKT\ID.TXT file that is located on the USB stick

• All the technical data relating to your Bluetooth interface are contained in the ID.TXT file. For details, please see question no.

E02.

Top

E02 Q

What data are contained in the ID.TXT file?

"Blaupunkt Bluetooth USB Interface 7 607 545 500 001"

• BT-ID:

Serial number, e.g. "00-19-61-00-00-00"

• HW-Ver: Hardware version

• SW-Ver:

Application software version

• SW-Sta:

Status of the SW (OK | NOT OK)

• P.Date: Production date

• P.Code:

Production code (DE, CN)

• Created by Boot-loader SW version / application SW version

Top

Note:

By keeping these data handy, you can simplify error analysis for your dealer or the Blaupunkt hotline so that you obtain more precise information for finding a solution more quickly.

E03 Q

When is the ID.TXT created?

A By the boot-loader software:

After the boot loader is started and the system recognizes that a USB stick is present containing the directory [USB:]\BLAUPUNKT; i.e. the file is written with details about the interface status as it is BEFORE the download of a new version of the application software.

By the application software:

After the system recognizes that a USB stick is present containing a directory called BLAUPUNKT.

If a file called ID.TXT is already present in the BLAUPUNKT directory it will be overwritten without warning.

To ensure you acquire the latest interface status in the ID.TXT file please perform the following steps (PC: steps that must be performed on the PC):

1. PC: If a BLAUPUNKT\ID.TXT file is already present on your USB stick, make a backup of it on your PC

2. PC: If a BLAUPUNKT\ID.TXT file is present on your USB stick, delete it (delete only the file but NOT the BLAUPUNKT directory)

3. Plug the USB

stick into the USB port of your installed Bluetooth interface


Applie s to

Applies to app. SW

HW

0

Applies to BL

SW

0

0

Page 4 / 23


No. Q

/

A


4. Switch on your car radio and wait approx. 30 seconds

5. Switch off your car radio

6. Unplug the USB stick

7. PC: Using a text editor (e.g. Notepad) on your PC, open the

Top

BLAUPUNKT\ID.TXT file that is located on the USB stick

8. PC: All the technical data relating to your Bluetooth interface are contained in the ID.TXT file. For details, see question no. E02

E04 Q

Why does my interface not create a file in the

BLAUPUNKT directory on my USB stick?

spaces? Contains special characters?)

Correct the directory name to BLAUPUNKT

Deactivate write protection (PC with Windows: right mouse button |

Properties… | uncheck the check mark next to "Read-only")

Read | …)?

Set the switch to the NOT write-protected position (W | RW | Write |

Read Write | …)

A Is the USB stick protected by encryption / security / write-protection software? If it is, deactivate protection using the relevant software.

This has, for instance, been observed with USB sticks from Kingston.

Top

E05 Q

Can I also connect the Bluetooth interface to an OEM radio manufactured by Blaupunkt?

Top interface of Blaupunkt aftermarket car radios and Blaupunkt aftermarket radio navigation systems (RNS).

Applie s to

HW


Applies to BL

SW

0

0


Page 5 / 23


2. General information

No. Q

/

A


A01 Q

What do the interface's status messages mean? (*TXT)

Applie s to


HW

0 the CDC audio source is selected and the car radio's display has been set to the appropriate mode (DIS button) you will be informed about the current status of the interface on the display.

This information is usually only displayed temporarily and is scrolled in the display if it is more than 7 characters long.

The most important displays are listed here:

Status display

PAIRING

CONNECT

<BT_DeviceName>

PAIRERR

PHONEBK

Meaning

The interface is attempting to connect to another Bluetooth device (e.g. a mobile phone)

The interface has successfully established a connection with the Bluetooth device called

<BT_DeviceName>.

Unsuccessful connection attempt

LOADPHB

NO TEL

STREAM

A caller name is being selected from the mobile phone's phone book (that has been copied into the interface) using the CD up / down and track up / down buttons on your car radio.

The phone book is being loaded from the mobile phone into the IF

This status display appears if you make an attempt during the PHONEBK status to access the phone book using the track up / down buttons when the phone book has not yet been fully loaded into the interface. See

B08, B09

There is no BT connection established with a mobile phone.

Interface is receiving an audio stream, playback via the car radio

NO USB

SEEKUSB

<playlist>

\

There is no USB stick connected to the USB interface

The table of contents of the USB stick is being searched

MP3 files are being played from the playlist called <playlist>

MP3 files are being played from the root directory of the USB stick

\<dir1>\<dir2>\...\

<text>

RESET

MP3 files are being played from the specified path (directory) of the USB stick

File name and ID3 tag data of the MP3 file that is currently being played (in accordance with the configuration)

All personal data have been deleted from the interface (e.g. connection information, copied phone book, configuration, ...)

CAUTION:

After the RESET, switch the radio off and then on so that modified information is


Applies to BL

SW

Page 6 / 23


No. Q

/

A

Question / Answer applied.

(in the same way as with a PC after an installation has been performed -> i.e. reboot the system)

Top

A02 Q

Can I connect two Bluetooth devices at the same time for hands-free telephoning and audio streaming?

Top device can, however, support both functions!).

A03 Q

Can I display more than 7 characters from the

Bluetooth interface? During MP3 playback from internal drives (e.g. CD, DVD, MemoryCard, ...) my car radio displays the information using more than 7 characters on the display.

Top text. With this, the text length is restricted by the radio to 7 characters and cannot be increased by the interface.

A04 Q

Can I change the scroll speed of long texts? (*TXT)

Top text. These data are usually updated on the car radio's display only once per second, which means that if the data transfer from the interface to the car radio were to take place more quickly this would lead to data losses.

A05 Q

What do I need a configuration file for?

directory on your USB stick for two reasons:

1. You have a car radio that behaves in a "special way" when connected to the CDC interface and for technical reasons is not fully supported by the basic configuration of the interface (for the list see the configuration instructions ).

In this case you should load the stated configuration file to ensure the interface works correctly with your car radio.

2. You have a car radio that supports the "Disk Naming" function

(*TXT, see configuration instructions ) and thus allows text displays from the CDC interface.

In this case you have the option to load a configuration file to adapt the (display) behavior of your interface to suit your personal preferences (playlist names, directory names, file names, ID3 tag data (if contained in the MP3 files)).

Note:

If a RESET of the interface is performed (i.e. deletion of all personal and connection data) the configuration data are also deleted. We therefore recommend you keep your personal configuration permanently in the BLAUPUNKT directory on the USB

stick. This will ensure the interface can restore your preferred configuration after a

RESET.

Top

A05 Q

What happens if I do not delete the SETUP.HEX file?


Applie s to

HW


Applies to BL

SW

0

0

0

0

0

Page 7 / 23


No. Q

/

A

Question / Answer is only utilized by the boot loader during a software update.

As long as you do not activate the boot loader (see software update ) this file can remain stored without affecting normal operation.

If you accidentally activate the boot loader, the (same) interface software will be reloaded. Other than the time required to perform this operation there are no other disadvantages.

Top

A06 Q

How can I reactivate my "seized up / crashed" interface?

USB storage media) that can be connected to one another, it is not possible to avoid incompatibilities completely. As a makeshift remedy, you can always switch off the radio and switch it on again after a minute. The interface will then restart from scratch. Check which steps might have led to the (supposed) error and avoid performing these

Top steps in future.

A07 Q

During MP3 playback, why do I sometimes not hear any music for one second from the interface?

restart after the SW detected a state that it could not remedy using other means. When communications problems are detected (for example, induced by frequent changes of state (BT connected / not connected / connected / ...) in conjunction with other almost simultaneous events (e.g. PTT pressed, USB connected /

Top disconnected, ...)) this extra built-in security monitor triggers a restart to ensure the interface always operates reliably for you.

Besides the brief pause, this does not result in any damage to the interface, radio or other connected devices.

Applie s to

HW


Applies to BL

SW

0

0


Page 8 / 23


3. Bluetooth (BT) operation

No. Q

/

A


B01 Q

Can I play copy-protected MP3 files via Bluetooth?

Top

(DRM). If the Bluetooth player (streaming mobile phone) supports

DRM, the audio stream can be played via the interface.

B02 Q

Why does the voice dialing feature of my mobile phone not work sometimes or at all with the Bluetooth interface?

function. conversations, ...) makes it more difficult for the device to recognize the correct speech pattern. When you use the speech dialing feature, turn down the volume of your radio and refrain from conversations and making noise in the car interior.

A See also Nokia (H01)

Top

B03 Q

Why does the pairing of my mobile phone with the

Bluetooth interface not work sometimes or at all?

at least 4 seconds. This ensures that the interface becomes visible to other Bluetooth devices (e.g. your mobile phone) for approx. 60 seconds. This time frame is indicated by "PAIRING" appearing in the display (*TXT). Activate the Bluetooth device search function on your mobile phone within this time frame (see the operating instructions of your mobile phone). As soon as the interface answers with the device name "Blaupunkt IF", enter the Pin "1234" in accordance with the

Top instructions of your mobile phone.

You can repeat this procedure as often as you like.

B04 Q

Which functions can I control from the car radio during audio streaming?

Bluetooth "Advanced Audio Distribution Profile" (AADP or A2DP) as well as "Audio Video Remote Control Profile" (AVRCP) only allow the following functions to be controlled:

• start / stop playback

• play the next / previous track (track up / down)

Your Bluetooth USB interface supports the control of these functions via the relevant CDC function buttons (start / stop is transmitted automatically when the source is changed (SRC) in the same way as for CDC). You can find details on this in your car radio's operating

Top instructions.

B05 Q

What do the track numbers mean that are displayed on the car radio's display during BT streaming?

This value only changes if you use the track up / down buttons on your car radio to start playback of the next / previous track. The change in number indicates that the interface has "understood" your command.


Applie s to


HW

0

Applies to BL

SW

0

0

0

0

Page 9 / 23


No. Q

/

A

Question / Answer Applie s to

HW


No information is transmitted within the BT stream that indicates whether a new track has begun. You could compare this type of transmission with a radio broadcast where music and / or speech are received continuously and likewise do not contain any data about the change to a new music track.

Top

B06 Q

Why does my mobile phone no longer connect automatically after a SW update has been performed?

0

Top

Please delete all the BT settings relating to the interface from your mobile phone and pair again from scratch!

B07 Q

Which functions of the interface are possible in which radio mode?

A Function Mode ->

Answer incoming calls

Reject incoming calls

Not during a call: activate call / voice dialing (mobile phone)

Not during a call: redial last no.

Not during a call, mobile phone without voice dialing:

PHONEBK

During a call: end call delete all call data

(RESET)

TUN | CD | ...

PTT

PTT long

CDC | MD

PTT

PTT long

PTT PTT

2 x PTT in a row n.a.

2 x PTT in a row

CD up / dn: select

ABC, DEF, GHI, ...

Track up / dn:

Search phone book

PTT PTT

Press PTT longer than

30 sec then switch radio off and on

Press PTT longer than

30 sec then switch radio off and on

Top

B08 Q

How can I access the phone book on my mobile phone via the interface?

number that is associated with the speech pattern stored in the mobile phone is dialed).

This function is available via the interface in all radio modes.

After the mobile phone <-> interface connection is established, the interface automatically checks whether a copy of the phone book for this telephone has already been stored in flash memory (i.e. from a previous connection with this mobile phone).

• If a copy of the phone book exists:

The entries are available immediately for selection using the track up / down buttons.

• If there is no copy of the phone book present:

In PHONEBK mode, the name selection buttons (track up / down) are locked until the interface has finished loading the phone book


Applies to BL

SW

Page 10 / 23


No. Q

/

A

Question / Answer from the mobile phone; if applicable, status LOADPHB.

Afterwards an update of the phone book is performed in the flash memory and the track up / down buttons are unlocked again.

From the user's point of view:

I always use the same mobile phone. Immediately after connecting the mobile phone to the IF, I can access the (old) phone book that is stored on the IF. Any changes to the mobile phone's phone book that have been made since the last time the mobile phone was connected to the IF

are not yet available. During the first few minutes of the current BT connection, the mobile phone's phone book is copied onto the IF (see B09). After the copy operation has finished, the new entries will also be available on the IF.

The mobile phone is changed (frequently):

If this is the case, the "incorrect" phone book is then (usually) stored on the IF.

After the mobile phone is connected to the IF, the phone book on the

IF

can only be accessed using the track up / down buttons once the

Top phone-book copying operation has completed.

B09 Q

How long does it take to copy the phone book from the mobile phone onto the interface?

The transfer time depends on:

• the number of stored entries

• the storage location (SIM card or mobile phone memory)

• the model of mobile phone

Rule of thumb:

Approximately 1 minute of transfer time is required for 100 entries.

A max. of 3 telephone numbers for each entry are imported.

Top

B10 Q

How many phone books are stored on the interface?

Applie s to

HW

Top your interface. Up to 200 entries can be stored in the phone book.

B11 Q

How do I recognize an incoming call?

There are various options here:

• In any case, the interface activates the "Tel. Mute" line; depending on your model, your radio will indicate this using, for example, a "Phone" symbol or "Phone" / "Tel" as text.

Please look this up in your radio's operating instructions.

Note:

This type of compulsory signaling is required by Bluetooth.Org.

• Some mobile phones transmit a ring tone (in so far as "mute" is not activated in the mobile phone's ring tone menu).

CAUTION: Please set the volume of your mobile phone's ring tone to a suitable level (please try out!); the ring tone is amplified and played via your car radio and car loudspeakers!

As a result, if the ring tone is set in the mobile phone to a level

that is too loud this can damage your hearing!

• Some mobile phones additionally signal an incoming call themselves (vibration, display illuminates, sound, ...)

Depending on the function and the storage location of your mobile phone (e.g. holder on the dashboard), these signaling options can be of additional use.



Applies to BL

SW

Page 11 / 23


No. Q

/

A

Top


B12 Q

How long does it take to establish a connection?

operating instructions), subsequent connections will take place automatically (as long as no more than 4 other mobile phones have been paired).

Automatic connection usually takes place within 10 seconds

(depending on the model of mobile phone) as long as the previous connection was ended correctly by the appropriate BT functions.

If the connection was ended because the mobile phone was moved outside the transmission field or the car ignition was switched off or on, you will additionally have to wait for the mobile phone timeout to elapse (approx. another 25 - 35 seconds).

Top

B13 Q

What are the differences in the Bluetooth wireless connection between hands-free operation and audio streaming?

Applie s to

HW


Applies to BL

SW protocol. The high-quality stereo audio streaming in accordance with the AAD profile occupies a greater bandwidth in the BT wireless connection than the hands-free connection that is adapted to speech quality and that complies with the HF profile.

This means that an audio streaming connection can have a shorter range and altered propagation conditions compared to the hands-free

Top connection.

B14 Q

How can I deactivate an active Tel. Mute?

you can cancel this by keeping the PTT button pressed down for 2 seconds. This will likewise end a currently connected phone call.

Top

B15 Q

How can I check whether my mobile phone is connected to the interface?

phone is connected to the BT USB IF:

• After the connection is established the notification text CONNECT

<BT name of your mobile phone> appears on the radio's display

(*TXT).

redialing the last dialed number and then cancel the operation in time. o Briefly press PTT -> PHONEBK o Briefly press PTT -> Redial last phone no.

NO TEL display is then shown

-> end with long press of PTT button or timeout

-> mobile phone & IF NOT CONNECTED

Tel. Mute activated, dial the last tel. no.

-> end with long press of PTT button -> mobile phone

Top

& IF CONNECTED

• Connection status is displayed on your mobile phone

B16 Q

What effect does a nearly empty mobile phone battery have on Bluetooth operation?


Page 12 / 23


No. Q

/

A


Top limitations to BT functionality cannot be ruled out (e.g. frequent disconnection in critical radio transmission situations).

Applie s to

HW


Applies to BL

SW


Page 13 / 23


4. USB operation

No. Q

/

A


U01 Q

Can I play copy-protected MP3 files from USB devices?

Applie s to


HW

0

Applies to BL

SW

(DRM).

Top

U02 Q

Are playlists supported?

0

Top

BLAUPUNKT directory on your USB stick. You can find a description of this file format on the Internet using the search term "M3U", e.g. at www.wikipedia.org

U03 Q

In what order are MP3 files played?

0 each directory and subdirectory count as one "CD", i.e. even directories that do not contain any MP3 files):

• Playlists in the BLAUPUNKT directory

The playlists are sorted alphabetically.

The MP3 files stated in the playlists are played in the specified order.

Incorrect entries in the playlists are ignored (e.g. file names with extensions that are not ".mp3", references to non-existent files).

• MP3 files in the root directory (highest directory level) o MP3 in files sub-subdirectory 1.1

• : files sub-sub-subdirectory 1.1.1 files sub-sub-subdirectory 1.1.i files sub-subdirectory 1.2

• :

• MP3

 : files sub-sub-subdirectory 1.2.1 files sub-sub-subdirectory 1.2.j o MP3 in files sub-subdirectory 2.1

• : files sub-sub-subdirectory 2.1.1 files sub-sub-subdirectory 2.1.k files sub-subdirectory 2.2

• :

• MP3

 : files sub-sub-subdirectory 2.2.1 files sub-sub-subdirectory 2.2.n

A total of up to 4 directory levels are supported. Any number of directories can be stored on each level.

All MP3 files that are found (except playlists) are played in the order

in which they are physically stored.

You can display this order on your PC using the "DIR" DOS

Top

command. (Windows Explorer sorts the displayed files and therefore does NOT display the order in which they are physically stored!)


Page 14 / 23


No. Q

/

A


U04 Q

What happens to non-MP3 files on the USB stick?

Applie s to

HW


0 hidden for MP3 playback and are not played.

Note:

The presence of many non-MP3 files, however, increases the time required to search for the next / previous MP3 file. Status display:

Top

"SEEKUSB"

U05 Q

Why isn't the full MP3 file name / title displayed in my radio's display? (*TXT)

0 is restricted by the radio to 7 characters.

Depending on the radio, the length of the texts to be displayed is restricted (internally) to 7 characters. The interface limits directory names plus file names to a total length of 255 characters (as Windows does) and ID3 tags to 30 characters per entry (title, artist, album, comment).

Top

To reduce the scrolling time of the displayed texts, choose shorter file names or titles or also use abbreviations. (*TXT)

U06 Q

Why is my USB stick not detected by the interface?

0 sticks that have been formatted as "FAT16" or "FAT32".

Other formats, such as "NTFS" are not supported.

Please check the storage format of your USB stick on your PC under

File | Properties | File system and if necessary reformat it.

A Some USB sticks are predefined internally as different USB devices e.g. as a floppy disk drive and at the same time as a Mass Storage

Top

Device (MSD). These USB sticks CANNOT be used.

U07 Q

Are USB card readers detected by the interface?

A hub:

In the case of some card readers, the system can read from the first logical drive. The card type that corresponds to this logical drive depends on the card reader being used. Recommendation: do not use a card reader or try it out.

USB card reader WITH a USB hub:

These are generally NOT supported since they log themselves on as a

USB

hub and the hub function is NOT supported by the interface.

Top

U08 Q

Is the playback position stored when the radio is switched off?

0

0 before the radio is switched off or before the audio source is changed.

After the radio is switched on the next time or after the "CDC" audio source is selected again, the interface attempts to resume playback from the stored position. This will work if you have not unplugged the

USB

stick in the meantime.

If the interface detects that playback cannot be resumed from the stored position (e.g. because you have swapped USB

sticks in the

Applies to BL

SW


Page 15 / 23


No. Q

/

A

Question / Answer meantime and / or directories have changed), playback will start from the beginning of the USB

stick.

Top

U09 Q

How should I organize my playlists and MP3 files on the USB stick?

BLAUPUNKT directory of your USB stick. The MP3 files specified in the playlists can all be located in one directory (but do not have to be!).

If you do not want to use playlists, we recommend you store the MP3 files in various directories and subdirectories according to your preferred sorting criteria (e.g. genre, artist, album, ...). This is particularly advisable for USB

sticks or USB drives with large capacities. You can then use the CD up and CD down buttons on your car radio to navigate between these directories.

Since the text display on car radio displays via the CDC interface is, for historical reasons, limited to 7 characters, you should choose short names for your directories, files and playlists to avoid excessively long scrolling times. (*TXT)

Note:

Please make sure your directory and file names do not contain any

special characters like accents, etc. Particularly in playlists (with different editor-specific character encoding options) this could otherwise render the directories/files inaccessible (i.e. no playback of

Top

MP3 files). These special characters are also displayed differently on the radio's display depending on the device being used.

U10 Q

How do I recognize a USB MSD (Mass Storage

Device)?

A Connect your USB stick to your Windows PC.

Highlight the USB drive in Explorer ("removable drive").

In the "File" | "Properties of the removable drive" menu, open the

"Hardware" tab. In the "All disk drives" window, select your USB stick.

In the "Device Properties" window, you should see next to Location:

"on USB Mass Storage Device".

With Windows 2000:

Start | Settings | Control Panel | System

"Hardware" tab | Device Manager..

Open USB controllers

After the USB

stick is plugged in it should appear as a "USB Mass

Storage Device".

With Windows XP:

Start | All Programs | Accessories | System Tools |

System Information | Components | USB

After the USB

stick is plugged in it should appear as a "USB Mass

Top

Storage Device".

Or very simply:

Copy one or more MP3 files onto the USB stick and try it out with the interface.

Applie s to

HW


0


Applies to BL

SW

Page 16 / 23


No. Q

/

A


U11 Q

Can the interface play other file formats other than

MP3, e.g. WMA, AAC, OGG?

A Your interface does not support any other audio formats other than

MP3.

Top

U12 Q

How are track numbers greater than 99 displayed?

A From 2002, Blaupunkt car radios provide support for controlling a CDC and, in some cases, also a MicroDrive. Depending on the radio being used, the radio's display presents the following information in different ways: "CD 1" to "CD 10" (= playlists or directories), Track 01 to Track

99, playing time 0:00 to 59:59 / 83.59.

In the "BAS" configuration (see configuration instructions ), these limitations are not exceeded.

In the "MD" configuration, you can manage more than 10 "CDs" (= playlists or directories) each containing more than 99 tracks (= MP3 files or playlist entries). Due to the display limitations, the following associations exist between the tracks and display (DIS):

Track DIS Remark Track DIS Remark

01 01

02 02

: :

99 99

100 01 (1)

101 01

: :

199 99

200 01 (1)

201 01

: :

299 99

300 01 (1)

301 01

: :

399 99

400 01 (1)

401 01

: etc.

Top

Remarks:

(1) Track "00" or "100" cannot be displayed on the radio.

Applie s to

HW


Applies to BL

SW


Page 17 / 23


5. Software update

No. Q

/

A


S01 Q

Can I update my interface's software?

Applie s to


HW

0

Please refer to software update for further information on this.

Possible hardware error:

• The PTT button is connected incorrectly or there is no contact

Measure the voltage using a high-impedance voltmeter at the 8-pin plug-type connector Pin 4

Button pressed: Voltage less than 1 V

Button NOT pressed: Voltage more than 1.5 V

• The switching voltage from the radio is not being switched

Use a high-impedance voltmeter to measure the voltage at the plug-type connector ISO-C3 Pin 16 (CDC, blue plug)

Radio = ON Voltage more than 8 V

Radio = OFF Voltage less than 1 V

Top

S03 Q

Why does my software update abort?

Top

SETUP.LOG file in the BLAUPUNKT directory on your USB

stick.

Check the entries in this file (using a text editor on your PC); the last line provides you with information on why the update was aborted. For further information on this see question S04

0

Applies to BL

SW


Page 18 / 23


S04 Q

What do the entries in the SETUP.LOG file mean?

SETUP.LOG

(*TXT)

DL OK Last line Setup successfully finished.

Congratulations!

No errors occurred during your software download.

Please switch off your radio now and then switch it back on again to activate the new software.

DLER001 ERR File SETUP.HEX not found

No file with the name "setup.hex" was found in the BLAUPUNKT directory of the

USB

stick.

Check whether the file was copied fully onto the USB stick and whether the file name has been written correctly.

DLER002 ERR Wrong File Checksum

The SETUP.HEX file is corrupt.

Check whether errors occurred during the download or whether the file was modified after the download. If necessary, please download it again.

BL 6512: Reformat the stick; next, create the BLAUPUNKT directory and then copy setup.hex into it (in BL 6512 there are errors when handling large numbers that can occur if the memory is fragmented).

DLER003 ERR 003 Error whilst deleting the flash memory with the application software

DLER004 ERR Not valid for this hardware

The SETUP.HEX file does not suit the hardware version of your interface.

Check the hardware version of your interface (is stated in the ID.TXT file under

HW-VER:) and compare this to the details in the software version list .

DLER500 ERR SW seems to be a pirate copy

SETUP.HEX is not registered for this interface device (mismatch of interface serial number and SW serial number)

Are you really sure that you have got a legal copy of SETUP.HEX registered for your interface device?

The SW does not suit this interface (the interface serial number and the software serial number do not belong together).

0

Top


Page 19 / 23

6512


S05 Q

How can I see the progress of a software update or find out if it has completed?

0

(SRC button or CDC button); see the operating instructions of your car radio. In CDC mode, the car radio's display shows the progress of the software update. For further information on this see question S06.

Note:

The software update will still function correctly even if you cannot see a progress indicator on your car radio. After the update has started, wait approx. 5 minutes before you switch off the radio again and unplug the USB stick.

S The boot loader (which cannot be modified on the customer side) contains software for displaying the software loading information on the car radio's display via the CDC interface.

A second piece of software for controlling the CDC interface exists parallel to this within the application software – this second piece of software is updated on the customer side when the software download is performed.

As a result, the following behavior can occur:

During the software download, there may be no progress indicator visible on the radio's display or it may appear incomplete; during subsequent operation though, the indicator will work better / more completely / differently.

However, if a software download is subsequently performed again, the previously described progress indicator will be visible again as a result of the unchanged boot-loader software.

Furthermore, it is also possible that a USB stick will work with the application software (also a newer version) but not with an older version of the boot-loader software. To perform the software update, please use another USB

stick that the boot loader recognizes.

Top

S06 Q

What do the indicators on the car radio's display mean during the software update?

0 information (the time starts counting from 0:00 in each "Track"):

1: Check being performed to see whether the

BLAUPUNKT directory exists on your USB

stick

Duration approx. 1 second (might not be visible)

2: Check being performed on the SETUP.HEX file to see whether it is valid for your interface

Duration approx. 45 seconds

3: The flash memory sectors are deleted


4: The new application software is being written from the

SETUP.HEX file into flash memory


5: The flash memory is verified by comparing it to the

SETUP.HEX file


99 Time 0:00: Setup completed with errors = DL ERR

(*TXT)

Track 99 Time 59:59: Setup completed without errors = DL OK

(*TXT)

Other times might be displayed depending on the model of radio, e.g. 83:59.

• For further information on the update process, please see


Page 20 / 23

Version: 04.12.2006 Bluetooth USB Interface 7 607 545 500 FAQ questions S03, S04

Top

S07 Q

Why do I not see a progress indicator on the car radio's display during the software update?

The reason for this can be as follows:

• Your car radio is not in CDC mode

-> switch your car radio to CDC mode (SRC button | CDC button); see the operating instructions of your car radio.

• The car radio's display is set to an unsuitable mode

-> change the display mode using the DIS button (see the operating instructions of your car radio)

This only applies to car radios that allow you to change the display mode.

• Your car radio does not support text displays via the CDC interface (*TXT). In the case of many radios, the CDC interface is treated differently to, say, an internal CD drive or DVD drive. This results in different display options for CD and CDC / interface.

You can find a log of the last software download in the SETUP.LOG file in the BLAUPUNKT directory of your USB

stick (see questions S03 and S04)

Top

S08 Q

When is the SETUP.LOG file created?

0

0 for the first time after the boot loader detects a USB

stick containing

Top the SETUP.HEX file in the BLAUPUNKT directory.

The data in this file are updated after every subsequent step in the software update process (corresponding to the "Tracks" in question

S06).

S09 Q

How can I

exit the boot loader manually? 0

S

The process of turning off the radio invokes a hardware

reset

of the interface due to the switching voltage switching off.

After this, the interface checks the status of the PTT

button.

Top

If the PTT button is not pressed down, the application software is started; the application software detects that the radio is switched off

(since there is no switching voltage present) and then places the interface in sleep mode.

S10 Q

How do I find out the version of my boot loader?

Top and then on again, release the PTT button). Afterwards, the boot loader writes the ID.TXT file containing the boot loader version number in the BLAUPUNKT directory.

Switch off your car radio with the PTT button not pressed down.

Use a text editor on your PC to open the ID.TXT file and then read the version of the boot loader in the last line.


Page 21 / 23



Page 22 / 23


6. Device-specific FAQ (Radio / RNS)

No. Q

/

A


R01 Q How can I store the playback position when switching off the radio?

Top interface) which causes the last playback position to be stored. With this radio, the command only appears when the switching voltage of the radio is switched off, which means the interface is no longer able to evaluate the command.

Despite this, you can still store the last playback position as follows:

• Use the CD-C | SRC | FM-AM | TUN button to select another source before you switch the radio off.

• Then switch the radio off.

• After you switch on the radio again, select the CDC as the playback source again and playback will resume from the stored position.

Note:

This only works for as long as you have not changed the USB

stick!

R02 Q When is the new software active after a software download?

Top

TWICE. The new application software will then be ready and you can select the CDC source again.

R03 Q How do I access MD mode?

A stick and copy the

Config.txt file containing the MD-mode configuration data into the directory; see A05.

2. SRC -> TUN -> CDC -> "MD" mode

After the software download, please switch your RNS off and on again

TWICE. The new application software will then be ready and you can select the CDC source again.

Top

R04 Q Why does my Rome NAV55E sometimes not display MD mode despite the MD configuration being present?

Top display even if MD mode was configured.

This is a characteristic of the radio that cannot be remedied by the interface.

You can work around the situation as follows:

Briefly switch to another audio source and then back to CDC. Doing so also updates the CDC/MD display.

Applie s to

HW


Applies to BL

SW


Page 23 / 23


7. Device-specific FAQ (mobile phone)

No. Q

/

A


H01 Q When does voice dialing work?

Top

"hang up" key).

As soon as you are in a menu or submenu, you can make a selection from the PHONEBK using CD up / down (to select letter groups) and track up / down (to select names within the selected group) (*TXT).

H02 Q How can I deactivate "PHONE" again after the first received and ended call? end the first received call with a long press on the PTT

button, the telephone switching feature (Tel. Mute) on your car radio might remain active. Please press the PTT

button for 2 seconds; you will then hear

Top the previously active audio source again.

H03 Q Why are Benq-Siemens x75 models NOT enabled for audio streaming? streaming in accordance with AADP. Due to problems inside the mobile phone (that can also occur in conjunction with other streaming receivers), the connection is terminated after anywhere between a few seconds and a period of up to approx. 20 minutes; the mobile phone notification "Internal Bluetooth error" is then provided.

(e.g. Benq-Siemens S75, SW Ver. 40, Var. A105).

This is unacceptable for users.

It is conceivable that this fault will be remedied with a new version of

Top the Siemens S75 software.

D

SonyEricsson K800i

H04 Q How do I start streaming from the mobile phone's media player?

Top

H05 Q How do I start streaming after a received phone call? over the interface but over the internal loudspeakers instead. Only after the red telephone symbol disappears from the mobile phone's display around 10-20 seconds after the phone call does the stream resume over the interface as desired. This is a characteristic of the mobile phone that we unfortunately cannot influence via the interface

(no stream commands reach the interface).

If streaming is already active before the telephone, the switch-over

Top from the call to streaming, however, occurs without delay.

Applie s to

HW


Applies to BL

SW


Page 24 / 23


Still to be added to the FAQ:

• x

• x

•

Still to be added to the compatibility list / test list:

•

\\hi230010\grp1$\Daten\P-CM-AC-PCI\01_RC-

Proj\545_500_Bluetooth_Interface\10_SW\6919\Test\2006-09-26_SCS2_SW6919.pdf

• x

•


Page 25 / 23

Datasheet | Blaupunkt CDC A01 Technical data

FAQ (Frequently Asked Questions) for the Bluetooth Interface 7 607 545 500

1. Installation

How do I obtain information on my Bluetooth interface?

What data are contained in the ID.TXT file?

When is the ID.TXT created?

Why does my interface not create a file in the

BLAUPUNKT directory on my USB stick?

Can I also connect the Bluetooth interface to an OEM radio manufactured by Blaupunkt?

2. General information

What do the interface's status messages mean? (*TXT)

Can I connect two Bluetooth devices at the same time for hands-free telephoning and audio streaming?

Can I display more than 7 characters from the

Bluetooth interface? During MP3 playback from internal drives (e.g. CD, DVD, MemoryCard, ...) my car radio displays the information using more than 7 characters on the display.

Can I change the scroll speed of long texts? (*TXT)

What do I need a configuration file for?

What happens if I do not delete the SETUP.HEX file?

How can I reactivate my "seized up / crashed" interface?

During MP3 playback, why do I sometimes not hear any music for one second from the interface?

3. Bluetooth (BT) operation

Can I play copy-protected MP3 files via Bluetooth?

Why does the voice dialing feature of my mobile phone not work sometimes or at all with the Bluetooth interface?

Why does the pairing of my mobile phone with the

Bluetooth interface not work sometimes or at all?

Which functions can I control from the car radio during audio streaming?

What do the track numbers mean that are displayed on the car radio's display during BT streaming?

Why does my mobile phone no longer connect automatically after a SW update has been performed?

Which functions of the interface are possible in which radio mode?

How can I access the phone book on my mobile phone via the interface?

How long does it take to copy the phone book from the mobile phone onto the interface?

How many phone books are stored on the interface?

How do I recognize an incoming call?

How long does it take to establish a connection?

What are the differences in the Bluetooth wireless connection between hands-free operation and audio streaming?

How can I deactivate an active Tel. Mute?

How can I check whether my mobile phone is connected to the interface?

What effect does a nearly empty mobile phone battery have on Bluetooth operation?

4. USB operation

Can I play copy-protected MP3 files from USB devices?

Are playlists supported?

In what order are MP3 files played?

What happens to non-MP3 files on the USB stick?

Why isn't the full MP3 file name / title displayed in my radio's display? (*TXT)

Why is my USB stick not detected by the interface?

Are USB card readers detected by the interface?

Is the playback position stored when the radio is switched off?

How should I organize my playlists and MP3 files on the USB stick?

How do I recognize a USB MSD (Mass Storage

Device)?

Can the interface play other file formats other than

MP3, e.g. WMA, AAC, OGG?

How are track numbers greater than 99 displayed?

5. Software update

Can I update my interface's software?

Why does my software update abort?

What do the entries in the SETUP.LOG file mean?

How can I see the progress of a software update or find out if it has completed?

What do the indicators on the car radio's display mean during the software update?

Why do I not see a progress indicator on the car radio's display during the software update?

When is the SETUP.LOG file created?

How can I

reset

How do I find out the version of my boot loader?

6. Device-specific FAQ (Radio / RNS)

7. Device-specific FAQ (mobile phone)

SonyEricsson K800i

Related manuals

Siemens

S75

Blaupunkt

7 607 548 500

Blaupunkt

7 607 548 500

Blaupunkt

IF BLUETOOTH/ USB C'N'C

Kompernass

KH3229-09/06-V2

Blaupunkt GmbH

UHN-7607545500

Blaupunkt

**What do the interface's status messages mean? (*TXT)**

**Can I change the scroll speed of long texts? (*TXT)**

**Why isn't the full MP3 file name / title displayed in my radio's display? (*TXT)**