Datalogic | PowerScan D8330 | Specifications | Datalogic PowerScan D8330 Specifications

Datalogic PowerScan D8330 Specifications
Datalogic Scanning, Inc.
959 Terry Street
Eugene, Oregon 97402
USA
Telephone: (541) 683-5700
Fax: (541) 345-7140
CONNECTIONS
CONNECTING THE CABLE
B. Plastic boot
C. Cable spacer
™
D. Cover
PowerScan D8330
E. Strain relief
READERS
1. Slip the cover over the cable.
QUICK REFERENCE GUIDE
PRODUCTS
Search through the links to arrive at your product page where you can download specific Manuals and
Software & Utilities including:
-


Datalogic Aladdin™, a multi-platform utility program that allows device configuration using a PC. It
provides RS-232 interface configuration as well as configuration barcode printing.
Service Programs - Warranty Extensions and Maintenance Agreements
-
Repair Services - Flat Rate Repairs and Return Material Authorization (RMA) Repairs.
-
Downloads – Manuals & Documentation, Data Sheets, Product Catalogues, etc.
7. Insert the strain relief into the
cover and tighten the screw to
fix the whole assembly to the
reader handle.
UK/US - The latest drivers and documentation updates for this product are available on the Internet.
Log on to: www.scanning.datalogic.com
I - Su Internet sono disponibili le versioni aggiornate di driver e documentazione di questo prodotto.
Collegarsi a: www.scanning.datalogic.com
D - Im Internet finden Sie die aktuellsten Versionen der Treiber und Dokumentation für dieses Produkt.
Adresse : www.scanning.datalogic.com
F - Les versions mises à jour de drivers et documentation de ce produit sont disponibles sur Internet.
Cliquez sur : www.scanning.datalogic.com
E - En Internet están disponibles las versiones actualizadas de los drivers y documentación de este producto.
Dirección Internet : www.scanning.datalogic.com
820035714 (Rev. H)
07
POWERSCAN Dxxx
e tutti i suoi modelli
and all its models
et tous ses modèles
und seine Modelle
y todos sus modelos
sono conformi alle Direttive del Consiglio Europeo sottoelencate:
are in conformity with the requirements of the European Council Directives listed below:
sont conformes aux spécifications des Directives de l'Union Européenne ci-dessous:
den nachstehenden angeführten Direktiven des Europäischen Rats:
cumple con los requisitos de las Directivas del Consejo Europeo, según la lista siguiente:
92/31/EEC, 93/68/EEC
emendamenti successivi
further amendments
ses successifs amendements
späteren Abänderungen
succesivas enmiendas
Basate sulle legislazioni degli Stati membri in relazione alla compatibilità elettromagnetica ed alla
sicurezza dei prodotti.
On the approximation of the laws of Member States relating to electromagnetic compatibility and
product safety.
Basée sur la législation des Etats membres relative à la compatibilité électromagnétique et à la sécurité
des produits.
Über die Annäherung der Gesetze der Mitgliedsstaaten in bezug auf elektromagnetische Verträglichkeit
und Produktsicherheit entsprechen.
Basado en la aproximación de las leyes de los Países Miembros respecto a la compatibilidad
electromagnética y las Medidas de seguridad relativas al producto.
Questa dichiarazione è basata sulla conformità dei prodotti alle norme seguenti:
This declaration is based upon compliance of the products to the following standards:
Cette déclaration repose sur la conformité des produits aux normes suivantes:
Diese Erklärung basiert darauf, daß das Produkt den folgenden Normen entspricht:
Esta declaración se basa en el cumplimiento de los productos con las siguientes normas:
EN 55022 (CLASS A ITE), August 1994:
AMENDMENT A1 (CLASS A ITE), October 2000:
LIMITS AND METHODS OF MEASUREMENTS OF RADIO
DISTURBANCE
CHARACTERISTICS
OF
INFORMATION
TECHNOLOGY EQUIPMENT
EN 61000-6-2, October 2001:
ELECTROMAGNETIC COMPATIBILITY (EMC).
PART 6-2: GENERIC STANDARDS - IMMUNITY
INDUSTRIAL ENVIRONMENTS.
March 1st, 2007
PEN
July-2011
DATALOGIC SCANNING LIMITED FACTORY WARRANTY
dichiara che
declares that the
déclare que le
bescheinigt, daß das Gerät
declare que el
e
and
et
und
y
RS-232
6. Push the cover along the cable
towards the reader, and hook it
over the yellow “tooth”.
UPDATES AND LANGUAGE AVAILABILITY
89/336/EEC EMC Directive
Tab
5. Insert the cable spacer into the
cable wire and slide it towards
the handle.
CONTACT US
Information Request Form and Sales & Service Network
Datalogic Scanning, Inc.
959 Terry Street
Eugene, OR 97402
USA
Arrow
4. Insert the cable into the socket
of the plastic boot.
SERVICE & SUPPORT
Technical Support - Product documentation and programming guides and Technical Support
Department in the world
-
Notch
3. Push the plastic boot and gasket
into the handle. Ensure that the
“Front” marking on the plastic
boot is facing out, with the
arrow pointing towards the
front of the scanner.
Datalogic provides several services as well as technical support through its website. Log on to
www.scanning.datalogic.com and click on the links indicated for further information including:
WEDGE
Align
2. Push the plastic boot into the
rubber gasket. Take care that
the tab on the plastic boot is
aligned with the notch in the
rubber gasket.
SERVICE AND SUPPORT

USB.
A. Rubber gasket
An Unpublished Work - All rights reserved. No part of the contents of this documentation or the procedures
described therein may be reproduced or transmitted in any form or by any means without prior written
permission of Datalogic Scanning, Inc. or its subsidiaries or affiliates ("Datalogic" or “Datalogic Scanning”). Owners
of Datalogic products are hereby granted a non-exclusive, revocable license to reproduce and transmit this
documentation for the purchaser's own internal business purposes. Purchaser shall not remove or alter any
proprietary notices, including copyright notices, contained in this documentation and shall ensure that all notices
appear on any reproductions of the documentation.
Should future revisions of this manual be published, you can acquire printed versions by contacting your
Datalogic representative. Electronic versions may either be downloadable from the Datalogic website
(www.scanning.datalogic.com) or provided on appropriate media. If you visit our website and would like to make
comments or suggestions about this or other Datalogic publications, please let us know via the "Contact
Datalogic" page.
DISCLAIMER
Datalogic has taken reasonable measures to provide information in this manual that is complete and accurate,
however, Datalogic reserves the right to change any specification at any time without prior notice. Datalogic and
the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S.A. and the
E.U. All other brand and product names may be trademarks of their respective owners.
FOR
Warranty Coverage
Datalogic warranties this product against defects in workmanship and materials, for a period of 3 years from the date of shipment, provided that the product is operated under normal and proper conditions.
Datalogic Scanning ("Datalogic") hardware products are warranted against defects in material and workmanship under normal and proper use. The liability of Datalogic under this warranty is limited to furnishing the labor and parts necessary to
remedy any defect covered by this warranty and restore the product to its normal operating condition. Repair or replacement
of product during the warranty does not extend the original warranty term. Products are sold on the basis of specifications
applicable at the time of manufacture and Datalogic has no obligation to modify or update products once sold.
If Datalogic determines that a product has defects in material or workmanship, Datalogic shall, at its sole option repair or
replace the product without additional charge for parts and labor, or credit or refund the defective products duly returned to
Datalogic. To perform repairs, Datalogic may use new or reconditioned parts, components, subassemblies or products that
have been tested as meeting applicable specifications for equivalent new material and products. Customer will allow Datalogic to scrap all parts removed from the repaired product. The warranty period shall extend from the date of shipment from
Datalogic for the duration published by Datalogic for the product at the time of purchase (Warranty period). Datalogic warrants repaired hardware devices against defects in workmanship and materials on the repaired assembly for a 90 day period
starting from the date of shipment of the repaired product from Datalogic or until the expiration of the original warranty
period, whichever is longer. Datalogic does not guarantee, and it is not responsible for, the maintenance of, damage to, or
loss of configurations, data, and applications on the repaired units and at its sole discretion can return the units in the "factory default" configuration or with any software or firmware update available at the time of the repair (other than the firmware or software installed during the manufacture of the product). Customer accepts responsibility to maintain a back up
copy of its software and data.
Warranty Claims Process
In order to obtain service under the Factory Warranty, Customer must notify Datalogic of the claimed defect before the expiration of the applicable Warranty period and obtain from Datalogic a return authorization number (RMA) for return of the
product to a designated Datalogic service center. If Datalogic determines Customer's claim is valid, Datalogic will repair or
replace product without additional charge for parts and labor. Customer shall be responsible for packaging and shipping the
product to the designated Datalogic service center, with shipping charges prepaid. Datalogic shall pay for the return of the
product to Customer if the shipment is to a location within the country in which the Datalogic service center is located. Customer shall be responsible for paying all shipping charges, duties, taxes, and any other charges for products returned to any
other locations. Failure to follow the applicable RMA policy, may result in a processing fee. Customer shall be responsible for
return shipment expenses for products which Datalogic, at its sole discretion, determines are not defective or eligible for warranty repair.
Warranty Exclusions
The Datalogic Factory Warranty shall not apply to:
(i) any product which has been damaged, modified, altered, repaired or upgraded by other than Datalogic service
personnel or its authorized representatives;
(ii) any claimed defect, failure or damage which Datalogic determines was caused by faulty operations, improper use,
abuse, misuse, wear and tear, negligence, improper storage or use of parts or accessories not approved or
supplied by Datalogic;
(iii)any claimed defect or damage caused by the use of product with any other instrument, equipment or apparatus;
(iv)any claimed defect or damage caused by the failure to provide proper maintenance, including but not limited to
cleaning the upper window in accordance with product manual;
(v) any defect or damage caused by natural or man-made disaster such as but not limited to fire, water damage,
floods, other natural disasters, vandalism or abusive events that would cause internal and external component
damage or destruction of the whole unit, consumable items;
(vi)any damage or malfunctioning caused by non-restoring action as for example firmware or software upgrades,
software or hardware reconfigurations etc.;
(vii)the replacement of upper window/cartridge due to scratching, stains or other degradation and/or
(viii)any consumable or equivalent (e.g., cables, power supply, batteries, keypads, touch screen, triggers etc.).
No Assignment
Customer may not assign or otherwise transfer its rights or obligations under this warranty except to a purchaser or transferee of product. No attempted assignment or transfer in violation of this provision shall be valid or binding upon Datalogic.
DATALOGIC'S LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, ORAL OR WRITTEN, STATUTORY OR OTHERWISE, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE, OR NONINFRINGEMENT. DATALOGIC SHALL NOT BE LIABLE FOR ANY DAMAGES SUSTAINED BY CUSTOMER ARISING FROM DELAYS IN THE REPLACEMENT OR REPAIR OF PRODUCTS UNDER THE ABOVE. THE REMEDY SET FORTH
IN THIS WARRANTY STATEMENT IS THE CUSTOMER'S SOLE AND EXCLUSIVE REMEDY FOR WARRANTY CLAIMS. UNDER NO CIRCUMSTANCES WILL DATALOGIC BE LIABLE TO CUSTOMER OR ANY THIRD PARTY FOR ANY LOST PROFITS, OR ANY INCIDENTAL,
CONSEQUENTIAL IN-DIRECT, SPECIAL OR CONTINGENT DAMAGES REGARDLESS OF WHETHER DATALOGIC HAD ADVANCE
NOTICE OF THE POSSIBILITY OF SUCH DAMAGES.
Risk of Loss
Customer shall bear risk of loss or damage for product in transit to Datalogic. Datalogic shall assume risk of loss or damage for
product in Datalogic's possession. In the absence of specific written instructions for the return of product to Customer, Datalogic will select the carrier, but Datalogic shall not thereby assume any liability in connection with the return shipment.
COMPLIANCE
CE COMPLIANCE
LASER SAFETY COMPLIANCE
The laser scanner conforms to the applicable requirements of both CDRH 21 CFR 1040 and EN60825-1 at
the date of manufacture.
Warning:
This is a Class A product. In a domestic environment this product may cause radio interference in which
case the user may be required to take adequate measures.
The laser light is visible to the human eye and is emitted from
the output window (1).
FCC COMPLIANCE
Laser warning and classification label (2).
Modifications or changes to this equipment without the expressed written approval of Datalogic could
void the authority to use the equipment.
CAUTION:
Use of controls or adjustments or performance of procedures
other than those specified herein may result in exposure to
hazardous visible laser light.
This device complies with PART 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference which may cause undesired operation.
The laser scanner utilizes a low-power laser diode. Although staring directly at the laser beam
momentarily causes no known biological damage, avoid staring at the beam as one would with any very
strong light source, such as the sun. Avoid that the laser beam hits the eye of an observer, even through
reflective surfaces such as mirrors, etc.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
The following information is shown on the laser scanner device class label:
POWER SUPPLY
This device is intended to be connected to a UL Listed/CSA Certified computer which supplies power
directly to the reader or else be supplied by a UL Listed/CSA Certified Power Unit marked “Class 2” or LPS
power source rated 4 - 30 V, minimum 420 mA, which supplies power directly to the reader via the power
connector of the cable.
WEEE COMPLIANCE
ITALIANO
LUCE LASER
NON FISSARE IL RAGGIO
APPARECCHIO LASER DI CLASSE 2
FRANÇAIS
RAYON LASER
EVITER DE REGARDER LE RAYON
APPAREIL LASER DE CLASSE 2
DEUTSCH
LASERSTRAHLUNG
NICHT IN DEN STRAHL BLICKEN
PRODUKT DER LASERKLASSE 2
ESPAÑOL
RAYO LÁSER
NO MIRAR FIJO EL RAYO
APARATO LÁSERDE CLASE 2
LED CLASS
For information about the disposal of Waste Electrical and Electronic Equipment
(WEEE), please refer to the website at www.scanning.datalogic.com.
PATENTS
This product is covered by one or more of the following patents.
Design Pat. AU 310201; AU 310202; CN 693980; CN735959; HK 0602013.5M001; HK 0602013.5M002; JP
1305693; KR 30-0460940; US D570,843 S; USD588,596 S.
US Pat. 5,992,740; 6,305,606 B1; 6,517,003; 6,808,114 B1; 6,997,385 B2; 7,387,246 B2; 5,367,151; 5,449,893;
5,545,889; 6,098,877; 6,220,514 B1; 6,412,698 B2; 6,607,132 B1; 6,817,529 B2; 6,834,805 B2; 7,948,214 B2.
Class 1 LED product.
European Pat. 789,315 B1; 895,175 B1; 1,128,314 B1; 1,128,315 B1; 1,396,811 B1; 1,413,971 B1; 1,816,585
B1; 1,942,442 B1.
This product conforms to EN60825-1:2001.
Additional patents pending.
RESTORE DEFAULT
DEFAULT VALUES
RESTORE DEFAULT
USB-KBD DEFAULT SETTINGS
USA keyboard, FIFO enabled, inter-character and inter-code delays disabled, USB
keyboard speed normal.
DATA FORMAT: code identifier disabled, no field adjustment, code length not
transmitted, no header, terminator = ENTER, character replacement disabled.
Ì$+$*oÎ
KEYBOARD NATIONALITY
USING POWERSCAN™ D8330/D8330 AR READERS
USB-KBD and Wedge users should select one of the following wedge keyboard nationality
codes according to the keyboard.
PowerScan™ D8330 readers automatically scan barcodes at a distance. Simply aim and
pull the trigger. Code scanning is performed along the scan line emitted from the reading
window. This line must cross the entire code. The best reading angles are indicated in the
figure below.:
Belge
To change the defaults refer to the PowerScan™ D8330/M8330 Reference Manual, or to
the Datalogic Aladdin™ Configuration program, both downloadable from the website.
Ì$+FJ7$-8Î
RS-232 Standard DEFAULT SETTINGS
9600 baud, no parity, 8 data bits, 1 stop bit, no handshaking, delay disabled, rx timeout
5 sec., ack/nack disabled, FIFO enabled, inter-character delay disabled, serial trigger
lock disabled.
DATA FORMAT: code identifier disabled, no field adjustment, code length not
transmitted, no header, terminator = CR-LF, character replacement disabled.
Deutsch
INTERFACE SELECTION
USB INTERFACE SELECTION
USA keyboard, caps lock off, caps lock auto-recognition enabled, num lock
unchanged, inter-character and inter-code delays disabled, control character
emulation = ctrl+shift+key.
DATA FORMAT: code identifier disabled, no field adjustment, code length not
transmitted, no header, terminator = ENTER, character replacement disable.
PEN DEFAULT SETTINGS
Ì$+UA03$-:Î
AIMING SYSTEM
USB-KBD-ALT-MODE
Español
Ì$+UA04$-@Î
Ì$+FJ6$-3Î
USB-COM*
interpret operating mode, conversion to code 39 disabled, output level normal, idle
level normal, minimum output pulse 600 μs, overflow medium, inter-block delay
disabled.
Ì$+UA02$-4Î
PowerScan™ D8330 and PowerScan™ D8330 AR provide an aiming system. If enabled, a
partial trigger press produces a red spot, which should be aimed over the code center to
get the best reading performance, see figure (1) above. By completely pressing the trigger
the scan line appears to start code scanning (2) .
Français
Ì$+FJ2$-ÊÎ
USB-IBM-Hand Held
CODE SELECTION
Ì$+UA01$-.Î
Enabled codes

EAN 8/EAN 13 / UPC A/UPC E without ADD ON
check digit transmitted, no conversions

Interleaved 2/5
check digit control and transmission, variable length code; 4-99 characters

English
Ì$+FJ4$-)Î
USB-KBD
WEDGE DEFAULT SETTINGS

Ì$+FJ3$-$Î
Select one of the interface codes according to your application.
Italiano
Ì$+FJ1$-ÅÎ
USB-IBM Table top
Ì$+UA00$-(Î
Disable Aiming System (Default)
USB KBD-APPLE
Ì$+UA05$-FÎ
Standard Code 39
no check digit control, variable length code; 1-99 characters
Disabled codes
EAN 128, ISBT128, Code 93, Codabar, pharmaceutical codes, MSI, Code 11,
Code 16K, Code 49, GS1 DataBar™ Codes
Ì$+Bj0$-"Î
Svenskt
Ì$+FJ5$-.Î
* When configuring USB-COM, the relevant files and drivers must be installed from the
USB Device Installation software, which can be downloaded from the web site http://
www.scanning.datalogic.com.
Code 128
variable length code; 1-99 characters
After setting up the reader, you can enable or disable the aiming system by reading the
codes below:
Enable Aiming System
Ì$+Bj1$-'Î
USA (Default)
Ì$+FJ0$-|Î
PEN EMULATION INTERFACE SELECTION
PEN
Ì$+CP6$-BÎ
The following Keyboard Nationality selections are only valid for IBM AT compatible PCs:
DATA FORMAT TERMINATORS
Japanese
Electrical Features
@ 4V
@5V
@30V
Sleep mode
PowerScan™ D8330
AR
4 to 30 VDC
0.076 mm (3 mils)
0.25 mm (10 mils)
420 mA
310 mA
62 mA
4 mA
500 mA
370 mA
70 mA
4 mA
Scan Rat
Reading Indicators
For your convenience, some common Terminators are given below. For other Header/
Terminator selections, Data Format and Advanced Data Format parameters, see the
PowerScan™ D8330/M8330 Reference Manual.
RS-232 Standard
Ì$+CP0$-$Î
Russian (Latin)
PowerScan™ D8330
Power Supply
Max. Consumption:
Ì$+FJ8$-=Î
RS-232 INTERFACE SELECTION
TECHNICAL FEATURES
PowerScan™ D8330/ D8330 AR
Ì$+FJ9$-BÎ
Nixdorf Mode A
Ì$+CM2EC0$->Î
Russian (Cyrillic)
Ì$+FJA$-jÎ
Fujitsu
Ì$+CM1$-ÈÎ
35 ± 5 scans/sec
ICL Mode
Good Read Spot (green), Beeper
Ì$+EA1183$-0Î
Hungarian
Ì$+CM0$-ÃÎ
Good Read LED (green)
Enter
Ì$+FJB$-oÎ
Optical Features
Reading Field
(Typical performance at 20ºC / 68ºF
on high quality barcodes)
Max. Resolution
PCS (Datalogic Test Chart)
97.8 cm (38.5 in)
@ 40 mils
12.5 m (41.0 ft)
@ 100 mils reflective
0.076 mm (3 mils)
0.178 (7,5 mils)
15%
25%
WEDGE INTERFACE SELECTION
Wedge IBM AT or PS/2 PCs
1.3 mW
Scan Angle
42°
13.5° ± 0.7
Laser Safety Class
Class 2 EN 60825-1/CDRH
Environmental Features
Working Temperature
-30 °C to + 50 °C / -22° to +122 °F
Storage Temperature
-30 °C to + 70 °C / -22° to +158 °F
Humidity
90% non condensing
Drop Resistance
IEC 68-2-32 Test ED 2 m
Protection Class
IP65
Mechanical Features
Weight (without cable)
Cable Length
about 295 g (10.4 oz)
2 m (6 ft 6 in)
Ì$+EA1184$-8Î
Slovenian, Croatian, Serbian (Latin)
Ì$+FJC$-tÎ
None
Ì$+EA10$-dÎ
Romanian
Ì$+FJD$-yÎ
PC Notebook
0.9 mW
Tab
Ì$+CP500$-aÎ
Laser Features
Power (max)
CR-LF
Ì$+EA120D0A$-ÃÎ
Ì$+CP505$-ÈÎ
OPERATING TEST
Read the TEST code below.
Czech Republic
PC Notebook - ALT mode
Ì$+FJE$-~Î
Ì$+CP508$-2Î
Code 128
IBM AT - ALT mode
Ì$+CP507$-+Î
t
Interface for IBM XT and IBM Terminals 3151, 347X and 348X can be selected from the
PowerScan D8330/M8300 Reference Manual available online at http://www.scanning.datalogic.com.
e
s
t
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising