null  null
Automotive Vehicle Location solution (AVL)
High Sensivity 50 channel GPS engine
AGPS offline / Autonomous
Communication via Quad Band GSM engine
SMS, Data, Voice, TCP/IP, SMTP
Fully customizable behaviour
Car Security and Recovery
Thief Alert / Motion Detection
Online Tracking
Drivers Logbook/History
Territory Management / Geofencing
Remote administration & firmware update
Fully approved ( FCC, PTCRB, e1, CE )
Additional IO Ports
Motion sensor
Options: CAN Interface
Backup battery
is a free configurable smart tracking device, which
can be fully adapted to user requirements. Its main
purpose is to act as a mobile client for various
system solutions like AVL, fleet management,
vehicle security and recovery. The device can
operate fully autonomous and is able to interact
using sensors and actors.
It can be adapted to existing tracking solutions and
can be easily configured to gather or exchange
relevant information with servers or users directly.
An often used example is to send status reports or
verbose alert messages directly via SMS to users
and/or via TCP to tracking servers.
Users benefit most from combining comfort and
security aspects.
Drivers logbook and data logging functionalities
are combined in the Falcom history feature.
Geofencing can be used to report violations of
predefined routes or areas (for example if a car
enters or leaves a specific area/ no-go-zones).
All of these features are perfectly integrated in a
device concept, which significantly reduces timeto-market and provides low cost tracking and
security solutions.
Software features
Block diagram
• PFAL commands for full control
• Intelligent and flexible alarm system,
suitable for most applications
• Customizable device messages
• Easy to combine with most digital and
analogue sensors
• Drivers Logbook / History
• GeoFencing, distance calculation
• Trip management
• Local and remote communication
• Optional
- Encrypted communication
- Security authentification
• Remote access
- Status reports / tracking
- Commands
- Configuration
- Firmware update
Technical specification
GSM core
Quad-Band GSM/GPRS engine
Physical characteristics
Dimensions (LxWxH): 55 x 88 x 22 mm
GSM frequency bands: 850/900/1800/1900 MHz Weight: approx.120 g
GPRS class 10, class B
Temperature range
-40 °C to +85 °C
-40 °C to +85 °C
• Real time online tracking
• Fleet management / monitoring
50 channel GPS engine
-40 °C to +85 °C
• Security / emergency services
A-GPS offline / Autonomous
Battery option:
• Real time satellite navigation
Protocols: NMEA, GGA, GGL, GSA,
Battery1) discharging: -20 °C to +60 °C
• Territory management
Battery1) charging:
0 °C to +45 °C
• Personalized drivers logbook
Accuracy: Position < 2.5 m
Motion sensor
• Route verification
SBAS < 2 m
3-axis motion sensor
• Trip management / distance calculations • Theft protection
Acquisition: TTFF hot start: < 1 s average
• Toll collection / pay as you drive
TTFF warm satart: < 29 s average
16pin Molex 43045-1609
• Compatible with FALCOM
TTFF cold start: < 29 s average
• 8 inputs
Trace4you Server solution
Sensitivity: Acquisition: -160 dBm
- 4 configurable inputs (digital or analogue)
Tracking: -160 dBm (12 dBHz)
- 2 digital inputs (used for CAN feature)
Cold start: -144 dBm
- IGN, DiWu, power in/out
Limits: Velocity: 500 m/s (972 knots)
• 4 digital outputs (open collector 100 mA)
Altitude: 50.000 m
15pin CHEE 61022-Z315
Processor core
- RS232 (RX,TX V24 level)
- RS232 (RX,TX 3,3 V TTL level)
Memory: 8 MB FLASH / 2 MB RAM
SIM card reader for 1,8/3V SIM cards
GPS RF connector 50 Ohm FAKRA/Radiall
Electrical characteristics
GSM RF connector 50 Ohm FAKRA/Radiall
Power: +10,8 V to + 32 V DC
3 programmable LEDs
Li-Polymer 1000mA rechargeable battery *
CAN Interface*
* Optional available
** The GSM/GPRS module is fully functional (-20 °C to + 55 °C meets the 3GPP specifications).
1) Storage and using conditions of the device with device option are limited to the battery temperature range.
Note: Specifications and information given in this document are subject to change by FALCOM without notice.
For latest product information see
Version: 1.0.6
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF