Worx | WX472 | Technical data | Worx WX472 Technical data

Worx WX472 Technical data
SAFETY AND OPERATING MANUAL
JigsawWX472
1
2
3
4
5
12
6
11
10
9
8
7
13
A2
A1
3
2
1
2
1
B
C
B
C
D
E1
1
2
E2
19
F
G
19
H
G
H
19
1
2
I1
3
14
4
I2
19
J
1. VARIABLE SPEED CONTROL
2. LOCK-ON BUTTON
3. ON/OFF SWITCH
4. SOFT GRIP HANDLE
5. ALLEN KEY
6. BLADE STORAGE
7. ANGLE PLATE
8. BASE PLATE
9. ROLLER GUIDE
10. PROTECTION FINGER
11. PENDULUM FUNCTION CONTROL
12. DUST COVER
13. PARALLEL GUIDE
14. PARALLEL GUIDE FIXTURE (See Fig. I1)
Not all the accessories illustrated or described are included in standard delivery.
6
JigsawWX472
TECHNICAL DATA
Type WX472(460-479-designation of machinery, representative of Jig Saw)
Rated voltage
230-240V~50/60Hz
Rated power
550W
Rated No-load speed
800-2600/min
Stroke length
20mm
Protection class
/II
Cutting capacity, max. thickness:
Weight
Wood
65mm
Aluminum
12mm
Steel
6mm
2kg
ACCESSORIES
Allen key 1
Parallel guide 1
Metal cutting blade 1
Wood cutting blade 1
Aluminum cutting blade 1
We recommend that you purchase your accessories from the same store that sold you the tool.
Use good quality accessories marked with a well-known brand name. Choose the type according
to the work you intend to undertake. Refer to the accessory packaging for further details. Store
personnel can assist you and offer advice.
JigsawWX472
7
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING! Read all safety warnings
and all instructions. Failure to follow
the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for
future reference.
The term “power tool” in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
8
1WORK AREA SAFETY
a)Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b)Do not operate power tools in
explosive atmospheres, such as in the
presence of flammable liquids, gases
or dust. Power tools create sparks which
may ignite the dust or fumes.
c)Keep children and bystanders
away while operating a power tool.
Distractions can cause you to lose control.
2ELECTRICAL SAFETY
a)Power tool plugs must match the
outlet. Never modify the plug in any
way. Do not use any adapter plugs
with earthed (grounded) power tools.
Unmodified plugs and matching outlets
will reduce risk of electric shock.
b)Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric shock
if your body is earthed or grounded.
c)Do not expose power tools to rain or
wet conditions. Water entering a power
tool will increase the risk of electric shock.
d)Do not abuse the cord. Never use
the cord for carrying, pulling or
unplugging the power tool. Keep cord
away from heat, oil, sharp edges or
moving parts. Damaged or entangled
cords increase the risk of electric shock.
e)When operating a power tool outdoors,
use an extension cord suitable for
outdoor use. Use of a cord suitable for
outdoor use reduces the risk of electric shock.
f)If operating a power tool in a damp
location is unavoidable, use a residual
current device (RCD) protected
supply. Use of an RCD reduces the risk of
electric shock.
3)PERSONAL SAFETY
a)Stay alert, watch what you are
doing and use common sense when
operating a power tool. Do not use
a power tool while you are tired or
under the influence of drugs, alcohol
or medication. A moment of inattention
while operating power tools may result in
serious personal injury.
b)Use personal protective equipment.
Always wear eye protection. Protective
equipment such as dust mask, nonskid safety shoes, hard hat, or hearing
protection used for appropriate conditions
will reduce personal injuries.
c) Prevent unintentional starting. Ensure
the switch is in the off-position
before connecting to power source
and/or battery pack, picking up or
carrying the tool. Carrying power
tools with your finger on the switch or
energising power tools that have the
switch on invites accidents.
d) Remove any adjusting key or wrench
before turning the power tool on. A
wrench or a key left attached to a rotating
part of the power tool may result in
personal injury.
e) Do not overreach. Keep proper
footing and balance at all times. This
enables better control of the power tool in
unexpected situations.
f) Dress properly. Do not wear loose
clothing or jewellery. Keep your
hair, clothing and gloves away from
moving parts. Loose clothes, jewellery or
long hair can be caught in moving parts.
g)If devices are provided for the
connection of dust extraction and
collection facilities, ensure these are
connected and properly used. Use
of these devices can reduce dust-related
hazards.
JigsawWX472
4)POWER TOOL USE AND CARE
a)Do not force the power tool. Use
the correct power tool for your
application. The correct power tool will
do the job better and safer at the rate for
which it was designed.
b) Do not use the power tool if the
switch does not turn it on and off.
Any power tool that cannot be controlled
with the switch is dangerous and must be
repaired.
c) Disconnect the plug from the power
source and/or the battery pack from
the power tool before making any
adjustments, changing accessories,
or storing power tools. Such preventive
safety measures reduce the risk of starting
the power tool accidentally.
d)Store idle power tools out of the
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to operate
the power tool. Power tools are
dangerous in the hands of untrained users.
e) Maintain power tools. Check for
misalignment or binding of moving
parts, breakage of parts and any other
condition that may affect the power
tool’s operation. If damaged, have
the power tool repaired before use.
Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to bind
and are easier to control.
g) Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking into
account the working conditions and
the work to be performed. Use of the
power tool for operations different from
those intended could result in a hazardous
situation.
ADDITIONAL SAFETY
RULES FOR YOUR
RECIPROCATING SAW / JIG
SAW
1.Always wear a dust mask.
2.Hold power tool by insulated
gripping surfaces when performing
an operation where the cutting tool
may contact hidden wiring or its own
cord. Cutting accessory contacting a ‘live”
wire may make exposed metal parts of
the power tool “live” and could give the
operator an electric shock.
WARNING: Some dust particles
created by power sawing, contain
chemicals known to cause cancer, birth
defects or other reproductive harm.
Some examples of these chemicals are:
• Lead from lead-based paints.
• Crystalline silica from bricks and cement and other masonry products.
• Arsenic and chromium from chemically treated lumber.
Your risk from these exposures varies,
depending upon how often you do this
type of work. To reduce your exposure to
these chemicals:
• Work in a well-ventilated area.
• Work with approved safety equipment,
such as those dust masks that are
specially designed to filter microscopic
particles.
5)SERVICE
a)Have your power tool serviced by
a qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power tool is
maintained.
JigsawWX472
9
SYMBOLS
To reduce the risk of injury, user
must read instruction manual
Unlock
Double insulation
RCM marking
Warning
ABN: Australian Business Number, according to
which business details such as business name
and address can be found at website http://abr.
business.gov.au
Wear ear protection
Wear eye protection
Wear dust mask
10
Before any work on the machine
itself, pull the mains plug from the
socket outlet.
Wear protective gloves
Wood
Aluminium
Metal
Plastic
Lock
JigsawWX472
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the instruction
book carefully. Always wear a dust mask.
Recommendation that the tool always be
supplied via a residual current device with a rated
residual current of 30 mA or less.
INTENDED USE:
The machine is intended for sawing wood,
plastic, metal and building materials while resting
firmly on the workpiece. It is suitable for straight
and curved cuts with mitre angles to 45°. The saw
blade recommendations are to be observed.
Action
Figure
Blade Installation
See Fig A1
Blade Removing
See Fig A2
Variable speed control
See Fig B
Pendulum function
See Fig C
On/off switch
See Fig D
Lock-on button
See Fig D
Straight cut and curve cut
See Fig E1,E2
Bevel cut
See Fig F,G
Plunge cut
See Fig H
Parallel guide
See Fig I1,I2
Blade Storage
See Fig J
MAINTENANCE
Remove the plug from the socket before
carrying out any adjustment, servicing or
maintenance.
Your power tool requires no additional lubrication or maintenance.
There are no user serviceable parts in your
power tool. Never use water or chemical
cleaners to clean your power tool. Wipe clean
with a dry cloth. Always store your power tool
in a dry place. Keep the motor ventilation slots
clean. Keep all working controls free of dust.
Occasionally you may see sparks through the
ventilation slots. This is normal and will not
damage your power tool.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid
a hazard.
11
TROUBLESHOOTING
Symptom
Possible Causes
Possible Solution
Tool will not start when
power on
• Power cord is not plugged.
• Check to make sure power cord is
connected well into a working outlet.
Poor cut quality
• Blade is worn out.
• Blade is assembled incorrectly
• Pushing rate is too fast.
• Make sure the blade is sharp and
not broken.
• Make sure the blade is installed properly.
Push the machine slowly.
Work efficiency is low.
• Blade is worn out
• Incorrect speed setting
• Incorrect Pendulum function
setting
• Change to a new blade.
• Adjust the variable speed control
according to the material
• Adjust the pendulum function
control according to the material
Blade is not clamped
tightly by the Blade Holder.
• Blade is not inserted into
place fully.
Dismantle the blade and reinstall it
correctly.
JigsawWX472
www.worx.com
Copyright © 2014, Positec. All Rights Reserved.
2SSJ045PK11000A0
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising