D10/D10 Turbo Industrial Sliding Gate Motor Brochure

D10/D10 Turbo Industrial Sliding Gate Motor Brochure
So much thought has been put into every aspect of the D10
and D10 Turbo operators that we'll have to wait for
technology to catch up before we can make any
improvements!
Both operators use a battery driven high-torque 24V DC
motor, coupled to a robust gearbox to provide an automation
system that is quick, powerful and battery backed up – perfect
for industrial and commercial applications where heavy gates
are installed.
Upgrade to the lightning-fast D10 Turbo. It’s the perfect
solution for speed freaks to get their fix. Whether you’re just in
a hurry, or seriously concerned about your security, there is
no time wasted with the D10 Turbo at your gate.
This
beast will move a gate weighing up to 240kg at a blistering
speed of 40 metres per minute, and a gate weighing a ton at
an equally impressive 23 metres per minute. It is our fastest
operator yet!
Easy to set up and easy on the eye, the D10 and D10 Turbo
have everything you'd expect from CENTSYS.
Add an LCD controller that can monitor diagnostics and set
any function at the touch of a button and you'll understand
why you won't need another operator for a long time.
Main features
Speed and power
Brains and brawn! A robust but quiet 24V DC motor, coupled with a precision die-cast aluminium
gearbox, generates enough torque to allow the D10 to shift a four metre gate in ten seconds – and
the D10 Turbo is even quicker. An oil-lubricated gearset makes sure that these operators will just
keep on going.
Intelligent speed control
An operator to suit your lifestyle. Play it safe and set your gate to move slowly so your children
won't be hurt. If it's your security you are worried about, open the gate so fast that you don't have
to slow down when you turn into your driveway. It will lock behind you in a matter of seconds.
There's not much criminals can do with a CENTSYS gate operator standing in the way.
Battery backup
A 24V battery with rapid charger ensures that come low voltages, power spikes or failures, you
can always get in or out!
Accurate and safe position control
With one of the D10s on guard, there's no chance that your gates will damage your vehicle or hurt
your children or pets. The tiniest obstruction will stop your gate dead in its tracks!
Attractive styling
These gate operator’s sleek design and rugged, yet modern armour will complement any
driveway.
Jam-free Manual Override
An innovative conical design means no more jamming. Both operators can be put into manual so
effortlessly! No more smarting thumbs or put out backs.
Easy access for simple installations
Ready? With only two bolts required to secure either of the operators, these are our easiest units
to install yet! We've incorporated a jacking system so levelling of the operator is a cinch. Mounting
points are slotted allowing large adjustment to align the operator with the gate. Set. Go!
Intelligent automatic setup
Once you've got it in, it basically sets itself up. Use your LCD controller to follow an easy to use Q
and A system that makes setting up things like gate End-of-travel Limits as easy as setting the
time on your watch. The D10 and D10 Turbo do all the thinking for you.
Multiple operating features
With so many features, you're going to have to buy one of these operators just to try them all out!
One of our favourites is Holiday Lockout Mode - once enabled, your gate will become totally
immobilised. The only way to get in will be to go straight through – with
something very large.
Operate wirelessly, thanks to CENTSYS1
Besides its code-hopping technology offering the highest level
remote control security, this multichannel and multi-user
CENTSYS onboard receiver allows for a multi-button remote to
operate any combination of the system inputs, such as Gate
Trigger, Pedestrian Opening, Holiday Lockout, etc.
It stores up to 500 transmitter buttons, and amongst other
access control features, it provides the ability to selectively add
and delete transmitter buttons saved into its memory.
1. CENTSYS code-hopping
SLIDING GATE
OPERATORS
Alarm features (a world first)2
Burglars have some nifty techniques to get into your home. Fortunately, criminals can't
outsmart the one of these motors. An Ambush Alarm will alert your security company if the
opening or closing beams are interrupted for a pre-defined, but adjustable, time.
Similarly, a Break-in Alarm will go off if the closing beam outside your house is interrupted.
Their gig is up.
Advanced diagnostics
Our intelligent LCD-based controller puts the power of the D10 or the D10 Turbo at your
fingertips. An intuitive and user-friendly interface gives you access to features you never
even knew existed. Beyond setting one of the operator’s numerous functions and monitoring
diagnostic info - they will actually let you know if something is wrong. Somebody’s been
loitering at your gate? Your controller will tell you .
D10 and D10 Turbo controller features
Hardware features
&
Fully sealed plastic housing for controller to prevent ingress of dirt and insects
&
Easy setup of controller using LCD user interface
&
Removable connectors on controller for easy maintenance
&
Watchdog IC ensures full and safe operation of controller
&
Optional Backup Memory Module allows backing up of all the information that has been set up in the system
Electronic features
&
Opening and closing safety beam inputs with beam circuit functional test
&
High security cleared-beam Autoclose in conjunction with safety beam (PIRAC)
&
Break-in and Ambush Alarm (patent pending) with configurable outputs via onboard buzzer, Pillar Light relay, etc.
&
Multiple Modes of Operation: Standard Mode, Condominium Mode (multi-user), Reversing Mode, PLC and Deadman
Control Mode
&
Automatic closing with adjustable time, pushbutton override and selectable according to gate position
&
Remote Gate Status Indicator (gate position, power failure, low battery, multiple collision detection and Pillar Light status
indication)
&
Pedestrian opening (adjustable opening and Autoclose time)
&
Free-exit facility
&
Holiday Lockout - configurable as Emergency Stop
&
Courtesy / Pillar Light Timer with adjustable time
&
Fully configurable pre-delays with multi-modal pre-flash
&
Multiple Operating Profiles to suit region of installation– select between ZA, CE, etc.
&
Full configuration of gate operating parameters, including independent gate opening and closing speeds, ramp-up and
ramp-down distances and crawl speed
&
Positive Close Mode (e.g. ensure activation of electric fence contact switch)
&
Onboard multichannel CENTSYS code-hopping receiver with the ability to:
#
learn transmitter buttons to specific functions (e.g. Gate trigger,
Pedestrian opening, Free-exit, Pillar Light Control, Holiday Lockout)
#
selectively delete specific transmitters that have been lost or stolen
#
automatically learn transmitters into the system (Autolearn)
#
automatically delete transmitters that are no longer in use (Delete-Not-Present)
&
Integrated ChronoGuard (patent pending) with Real Time Clock and Calendar timer offering multichannel time-activated
and time-barring functionality
&
Auxiliary output can be configured via the ChronoGuard timer to provide timer functionality to external devices, such as
security lights, entrance fountain, etc.
Infrared safety beams or equivalent detection device must be fitted
PLC: separate inputs to open, close and stop the gate
Deadman Control Mode: separate inputs to open and close the gate,
that must be held active to move the gate
Remote LED must be fitted
Onboard receiver must be used or external access control device such as
keypad or keyswitch must be fitted
Inductive Loop Detector or infrared beams must be fitted
To use this feature, a normally-closed emergency stop pushbutton must
be fitted
Pre-flash security / Pillar Lights must be fitted
ChronoGuard timer technology (a world first)
These operators are so advanced that they no longer need humans to look after them. With the CENTSYS ChronoGuard timer
technology onboard, many of the features can be set to operate automatically or be time-barred at any time you choose.
Its built-in Real Time Clock and Calendar allows you to set up different exclusions, which can cater for public holidays, special Timeperiods, etc.
Once you’ve set up the D10 and D10 Turbo’s ChronoGuard using the intuitive LCD screen on the controller, you’ll start feeling
particularly redundant. For instance:
If your factory is particularly busy during certain hours of the day from Monday to Friday, set the
operators to keep the gates open during these peak times, allowing for quicker movement of vehicles
in or out of your factory.
During all other times and over the weekend or public holidays, you'll have to use your CENTSYS
remote control, SMARTGUARD keypad, Lattice proximity reader, etc. to get in or out.
If you have a free-exit loop fitted, your gates will automatically open for vehicles leaving your premises
during working hours.
Now, for added security, your D10 or D10 Turbo can automatically disable the free-exit loop at night,
weekends and holidays, ensuring that vehicles may only exit by using a remote control, keypad,
proximity card, etc.
Your staff can have remote controls that allow them in on weekdays – but ChronoGuard can easily
revoke their access over the weekend or on public holidays.
ChronoGuard technology allows for almost unlimited time-based functionality, all of which is very simply set up on the controller via
the intuitive menu system and LCD user interface. The following functionality is available:
&
Time-activate many of the physical inputs and outputs of the controller (see table below)
&
Time-bar many of the physical inputs and outputs of the controller, as well as particular remote buttons learned into the onboard
receiver (see table below)
&
The Real Time Clock and Calendar timer has the following flexibility:
#
It supports 100 Time-periods, that may be set according to:
#
Weekdays (M + T + W + T + F)
#
Weekends (S + S)
#
Special calendar events (family holiday, etc.) occurring on any date until the year 2100
#
Annual calendar events (New Year’s Day, etc.)
#
Allows for multiple Time-periods to be set during a 24-hour period
&
The Real Time Clock and Calendar timer is backed up for at least one hour to maintain the current time and date in the event that
all power is removed from the controller
Physical inputs
Trg:
Gate trigger
Ped:
Pedestrian
opening
FRX:
Free-exit
Aux:
Pillar light
control
Lck/Stp:
Holiday
Lockout
Close:
Closing safety
beams
Physical outputs
Aux IO:
Light:
Auxiliary
Pillar light
output
relay
Time-activate
Time-bar
physical connection to an external device, eg. Inductive Loop Detector, SMARTGUARD keypad, etc.
interfaces with onboard CENTSYS code-hopping receiver
Aux IO - open collector output that can be used to drive an external relay for operating any external device, eg. water feature, security lights, etc.
SLIDING GATE
OPERATORS
Technical specifications
D10
NYLON
ANGLE
STEEL
NYLON
RAZ
Steel, Nylon RAZ or
Nylon angle rack
CENTSYS Infrared
beams
A variety of rack available in
different lengths, for different
strengths
Always recommended on any
gate automation installation
P36
Passive sensitive edge
provides additional protection
against crushing
Input voltage
Motor voltage
Motor power supply
Battery charger
Current consumption (mains)
Current consumption (motor at rated load)
Operator push force
Starting
Operator push forced
Rated
Maximum gate mass
Maximum gate length
Maximum gate speed (varies with load)
Manual override
Maximum number of operations per day
Duty cycle (mains present)
Operations in standby with 2 x 7Ah batteries
Half day
Full day
Collision sensing
Operating temperature range
Onboard receiver type
Receiver code storage capacity
Receiver frequency
Mass of unit packed (with standard kit but
excl. rack and battery)
Packaging dimensions (with standard kit but
excl. rack and battery)
D10 Turbo
220V - 240V AC ± 10%, 50Hz
24V DC
Battery driven (standard capacity - 2 x 7Ah)
2A @27.5V
170mA
8A
20kgf
15kgf
Varies with speed
50m
40-50m/min
4A
40kgf
30kgf
1000kg
100m
22-26m/min
Lockable lever with key release
750
45%
25%
87
69
58
37
Electronic
-15°C to +50°C
CENTSYS code-hopping multichannel
500 transmitter buttons
433MHz
13kg
355mm wide x 288mm deep x 485mm high
D10 Turbo maximum operating
speed for corresponding gate mass
Gate mass (kg)
Theft-resistant cage &
padlock Retro-installable
steel cage that increases the
resistance of the operator
against theft
SMARTGUARD or
SMARTGUARDair keypad
SOLO/Lattice Proximity
Access Control System
Proximity reader allowing for
Cost-effective and versatile
access to both pedestrians and
wired and wireless keypad,
vehicles, while offering a higher
allowing access to pedestrians level of security than a keypad
POLOphone intercom
G-SWITCH-22 devices
Allows visitors to communicate
with people inside in order to
gain access to the property
Allows for monitoring and
activating the operator, via your
phone, from anywhere in the
world that has GSM network
coverage
FLUX SA Loop Detector
Allows free-exit of vehicles
from the property - requires
ground loop to be fitted
240kg
300kg
400kg
500kg
600kg
700kg
800kg
900kg
1000kg
CENTSYS transmitters
Backup Memory Module Gooseneck
Wheel kits
Solar supply
A variety of wheel kits are
available from your CENTSYS
dealer
Alternative means of powering
the system - consult your
CENTSYS dealer
www.centsys.com
Centurion Systems (Pty) Ltd • South Africa
Contact number: +27 11 699 2400
Steel pole for mounting
intercom gate station or
access control reader
50m/min
42m/min
36m/min
32m/min
29m/min
27m/min
25m/min
24m/min
23m/min
Can operate off a solar supply, consult your CENTSYS dealer for assistance
Can increase battery capacity for longer standby times
See table above
Gate opening and closing speeds can be configured to run slower depending on the
requirements of individual installations
With brush replacement interval of two years
Based on 25°C ambient temperature and unit not in direct sunlight
Based on an operator push force of less than 50% of rated
Based on four metre gate, excluding infrared safety beams
Overall dimensions
Available in one, two, three and Back up all the transmitters
four button variants.
and operating details set up in
Incorporates code-hopping
the controller
encryption
Operator max. running speed (m/min)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement