Billion | myGuard 7500GL | User`s manual | Billion myGuard 7500GL User`s manual

Billion myGuard 7500GL User`s manual
myGuard 7500GL
802.11g Security ADSL Router
Quick Start Guide
myGuard 802.11g Security ADSL Router
Introduction
In light of emerging threats of Viruses and growing demands for URL filtering from home users,
Billion designs myGuardTM 802.11g Security ADSL Router, with central control and central
guarding, to help identify vulnerabilities and protect PCs and networks while constant connected
to the Internet. Billion’s myGuard integrates Security Service powered by Trend Micro includes
Anti-Virus, Anti-Spam, Security Scan and Dynamic Parental Control Service (60-day trial free),
in addition to security features of VPN, Firewall and Wi-Fi Protected Access. Simply connect
computer(s) to Billion’s myGuard Security ADSL Router and launch broadband access, Billion’s
myGuard Security ADSL Router will guard users’ home network and their PC. Security Services
also address parents’ concerns of children going to inappropriate websites. In the meantime,
users still enjoy the freedom of using Wireless WLAN technology.
Package Contents
myGuard 802.11g Security ADSL Router
CD with the user’s manual in PDF format, router’s application, and Trend Micro Internet
Security software. (For downloading Trend Micro Internet Security software, please
read details on page 11)*
RJ-11 ADSL/telephone Cable
Ethernet (CAT-5 LAN) Cable
Console (PS2-RS232) Cable
AC-DC power adapter (12V DC, 1A)
External Antenna
This Quick Start Guide
Do not use this router in high humidity or high temperature.
Do not use the same power source for this router as other
equipment.
Warning
Do not open or repair the case yourself. If this router is too hot, turn
off the power immediately and have it repaired at a qualified service
center.
Avoid using this product and all accessories outdoors.
Place this router on a stable surface.
Attention
Only use the power adapter that comes with the package. Using
a different voltage rating power adaptor may damage the router.
1
Quick Start Guide
The Front LEDs
LED
2
Meaning
1
PWR
Lit when power is ON.
2
SYS
Lit when the system is ready.
3
LAN port 1
Lit when connected to an Ethernet device.
Green for 100Mbps; Orange for 10Mbps
Blinking when data is transmitted/received.
4
LAN port 2
Lit when connected to an Ethernet device.
Green for 100Mbps; Orange for 10Mbps
Blinking when data is transmitted/received.
5
LAN port 3
Lit when connected to an Ethernet device.
Green for 100Mbps; Orange for 10Mbps
Blinking when data is transmitted/received.
6
LAN port 4
Lit when connected to an Ethernet device.
Green for 100Mbps; Orange for 10Mbps
Blinking when data is transmitted/received.
7
WLAN
Lit green when the wireless connection is established. Flashes
when sending/receiving data.
10
MAIL
Flash when there is Email in your configured Email account.
11
PPP
Lit when there is a PPPoA / PPPoE connection.
13
ADSL
Lit when successfully connected to an ADSL DSLAM (“linesync”).
myGuard 802.11g Security ADSL Router
The Rear Ports
2
3
4
5
6
1
Port
1
Meaning
LINE
Connect the supplied RJ-11 (“telephone”) cable to this port when
connecting to the ADSL/telephone network.
CONSOLE
Connect a PS2/RS-232 cable to this port when connecting to a
PC’s RS-232 port (9-pin serial port).
2
3
LAN
1X
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the
4X four LAN ports when connecting to a PC or an office/home
(RJ-45 connector) network of 10Mbps or 100Mbps.
—
4
RESET
After the device is powered on, press it to reset the device or
restore to factory default settings.
0-3 seconds: reset the device
6 seconds above: restore to factory default settings (this is used
when you cannot login to the router. E.g. forgot the password)
5
PWR
Connect the supplied power adapter to this jack.
6
Power Switch
Power ON/OFF switch
3
Quick Start Guide
Connecting Your ADSL Router
1. Connect the Router to a LAN (Local Area Network) and the ADSL/telephone (LINE) network.
2. Power on the device.
3. Make sure the PWR, SYS and WLAN LEDs are lit steadily and that the relevant LAN LED
is lit.
4
myGuard 802.11g Security ADSL Router
Configuring PC in Windows XP
1. Go to Start / Control Panel (in Classic View).
In the Control Panel, double-click on Network
Connections.
2. Double-click Local Area Connection.
3. In the Local Area Connection Status
window, click Properties.
4. Select Internet Protocol (TCP/IP) and click
Properties.
5. Select the Obtain an IP address
automatically and the Obtain DNS server
address automatically radio buttons.
6. Click OK to finish the configuration.
5
Quick Start Guide
Configuring PC in Windows 2000
1. Go to Start / Settings / Control Panel. In the
Control Panel, double-click on Network and
Dial-up Connections.
2. Double-click Local Area Connection.
3. In the Local Area Connection Status window
click Properties.
4. Select Internet Protocol (TCP/IP) and click
Properties.
5. Select the Obtain an IP address
automatically and the Obtain DNS server
address automatically radio buttons.
6. Click OK to finish the configuration.
6
myGuard 802.11g Security ADSL Router
Configuring PC in Windows 98/Me
1. Go to Start / Settings / Control Panel. In the
Control Panel, double-click on Network and
choose the Configuration tab.
2. Select TCP/IP ->
NE2000 Compatible, or the name of your
Network Interface Card (NIC) in your PC.
3. Select the Obtain an IP address
automatically radio button.
4. Then select the DNS Configuration tab.
5. Select the Disable DNS radio button and click
OK to finish the configuration.
7
Quick Start Guide
Configuring PC in Windows NT4.0
1. Go to Start / Settings / Control Panel. In the
Control Panel, double-click on Network and
choose the Protocols tab.
2. Select TCP/IP Protocol and click Properties.
3. Select the Obtain an IP address from a
DHCP server radio button and click OK.
8
myGuard 802.11g Security ADSL Router
Configuring Your 802.11g Security ADSL Router
To configure this device, you must have IE 5.5 /
Netscape 4.5 or above installed
Verifying Your Local Network Connection with the Device
To see if this ADSL Router is
visible on the local network, go
to Start / Run. In the Run dialog
box, type “ping 192.168.1.254”
then press OK.
A command prompt window will
pop out.
If your ping is
successful which means your
local network is able to reach to
the device, then the command
prompt window will close up
automatically.
Connection fails, when you see
“Request timed out” in the
command prompt window. You
may need to check your set up.
9
Quick Start Guide
Connecting to the Router
Open the web browser and type
http://192.168.1.254 in the
browser’s address box. This
number is the default IP address
for this router. Press Enter.
A user name and password
window will appear. The default
User Name and Password are
“admin” and” admin”. Press
OK to logon to the router
10
myGuard 802.11g Security ADSL Router
Activating Trend Micro Security Services
Before you can take full advantage of Trend Micro Security Services, you need to activate them.
Available Services
Security Scan
Before Activation
After Activation
60-day evaluation version
Unlimited use.
Not available.
60-day evaluation version with
option to purchase for one-year
use.
Vulnerability reports
Virus Scan
Personal Firewall
Spyware Protection
Parental Controls
To activate Trend Micro Security Services, perform the following:
Step 1: Registering your Trend Micro account
Step 2: Validating the Registration Email. You will be receiving the Serial number of your 60day trial Trend Micro Internet Security.
Step 3: Installing Trend Micro Internet Security (named TIS 11.35 Package).
*Important: you may download it through the Internet or CD folder named Trend Micro
Internet Security Software.
Please refer to TMSS Quick Start Card for a quick set up and check Trend Micro
Internet Security user’s manual for more detailed information.
Product Support and Contact Information
Most problems can be solved by referring to the Troubleshooting section in the User’s Manual.
If you cannot resolve the problem with the Troubleshooting chapter, please contact the dealer
where you purchased this product.
Contact Billion
http://www.billion.com/
Mac OS is a registered Trademark of Apple Computer, Inc.
Windows 98, Windows NT, Windows 2000, Windows Me and Windows XP are registered Trademarks of Microsoft
Corporation.
11
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising