OPC SERVERS
OPC SERVERS
For OPC-Enabled HMI/SCADA
Visualize Your Enterprise
PL-OPCSVR-EURO
Effective April 1, 2006
Prices subject to change without notice
ICONICS OPC Servers
ICONICS OPC Servers are built with ICONICS’ version 3.1 OPC ToolWorX, except where noted, and are compliant with OPC Foundation specifications
including Data Access 1.0 to 3.0, Alarm and Events 1.0 to 1.2 and OPC XML Data Access.
ALL PRODUCTS AND DOCUMENTATION PROVIDED ON CD-ROM.
Description – Vendor
(All OPC Servers Support Windows 98 / NT / 2000 / XP / Server 2003 unless noted)
ABB SattBus Ethernet OPC Server - Kepware
Model
Number
OPC-KEP SATBE
Supports ABB SattCon devices including SattCon 200, SC05-25SB and any device that supports the application protocol
"SattBus" and has the SattBus Ethernet interface/module present via Ethernet.
ABB SattBus OPC Server - Kepware
OPC-KEP SATBS
Supports ABB SattCon PLCs including SattCon 05, SattCon 15, SattCon 31, SattCon 35, SattCon 200, Satt Control OP45
via SattBus ISA card.
Adam OPC Server – Prosoft (ICONICS)
OPC-ADAM
OPC compliant, 32 bit, multi-threaded Windows based device driver, which can operate stand-alone or supply direct
rd
interface to GENESIS32 OPC Client Application Modules or OPC connection to other 3 Party OPC applications. Provides
OPC Tag Browsing, OPC Ranging and includes an OPC client test application. Supports the following devices: ADAM-4011
/ 4011D / 4012 / 4013 / 4014D / 4016 / 4017 / 4018 / M (excepting the data logging feature), ADAM-4021 / 4050 / 4052 /
4053 / 4060 / 4080 / 4080D ADAM-5000 / 485, including: ADAM-5017 / 5018 / 5024 / 5051 / 5052 / 5056 / 5060. Requires
driver utility. Contact ICONICS for details.
Allen-Bradley DHX Networks OPC Server Suite - Cyberlogic
OPC-CYB DHX Suite
This all-in-one OPC server suite includes device drivers for all Allen-Bradley networks, PLCs and interface cards. Directly
supports Allen-Bradley 1784-KT Rev A, 1784-KT Rev B, 1784-KT2, 1784-KTCX Series B, 1784-KTX, 1784-KTXD, 1784PCMK, 1784-PCMK Series B, 1784-PKTX/A and 1784-PKTXD/A adapters as well as SST 5136-SD Rev 1, 5136-SD Rev 2,
5136-SD-MCA, 5136-SD-PCI and SST-DHP-PCI adapters. No third party drivers required.
Supports all Allen-Bradley and SST DH, DH+, DH-485 and ControlNet network adapters, Gateway for remote access to all
Allen-Bradley networks, ControlLogix Gateway for remote access to Allen-Bradley DH+ through DHRIO, Allen-Bradley
Ethernet communications, Serial DF-1 communications and includes a Virtual DHX Driver for enabling 16-bit legacy
applications in 32-bit Windows.
Supports Allen-Bradley Data Highway, Data Highway Plus, Data Highway Plus, DH-485, Ethernet, EtherNet/IP, DF1,
ControlLogix Gateway and DHX Gateway for remote access networks.
Supports Allen-Bradley PLC-2, PLC-3, PLC-5, SLC-500, MicroLogix, and ControlLogix and FlexLogix families of PLCs.
The DHX OPC Server Suite has integrated fault-tolerant communication features not found in other OPC servers. Multiple,
priority-based access paths can be used to build true redundant communication architecture below the server level. The
built-in Health Watchdog monitors the health of all network connections to all physical devices. The auto-switching access
paths can be configured to quickly redirect communications to an unlimited number of plant-floor devices and networks.
Using Auto-configuration and DirectAccess™ features, a user can configure a minimal server setup with a single mouse click
and gain access to all the registers in each network node without any user configuration.
DHX OPC Server Suite supports the latest OPC specifications XML Data Access 1.0, Data Access 3.0, 2.05a, 1.0a and
Alarms & Events 1.1 and is compliance-certified using the OPC Foundation’s compliance program.
ICONICS, Inc. 100 Foxborough Blvd. • Foxborough, MA 02035 • (508) 543-8600 • FAX (508) 543-1503 • info@iconics.com • www.iconics.com
Page
1 of 10
OPC SERVERS
For OPC-Enabled HMI/SCADA
Visualize Your Enterprise
Description – Vendor
PL-OPCSVR-EURO
Effective April 1, 2006
(All OPC Servers Support Windows 98 / NT / 2000 / XP / Server 2003 unless noted)
Allen-Bradley OPC Server Suite – Kepware
Model
Number
OPC-KEP ABSTE
Supports CONTROLLOGIX 5550, 5555, 5553, 5561, 5562, 5563 via 1756 ENET/ENBT Module or via 1761 NET-ENI;
CompactLogix 5300, 5320, 5330 via built-in EtherNet/IP port on processors with E suffix (i.e. 1769-L35E) or via 1761-NETENI Series B using Channel 0; SoftLogix 5800 via EtherNet/IP Messaging Module.
Supports FlexLogix 5400, 5433, 5434 via 1788-ENBT Ethernet Daughtercard or via 1761-NET-ENI Series B using Channel
0; PLC 5, 5/10, 5/15, 5/20, 5/20C, 5/25, 5/30, 5/40, 5/40C, 5/60, 5/80, 5/80C, via 1756 ENET/ENBT Module Gateway to
1756-DHRIO.
Supports DF1 Full and Half Duplex Serial Protocol; PLC5/20E, 5/40E, 5/80E, SLC 5/05 any Ethernet link, via DF1 Full and
Half Duplex Serial Protocol.
Supports PLC5 Control Net, SLC 500 Fixed I/O Processor via 1756 ENET/ENBT Module Gateway to 1756-DHRIO; SLC
5/01, 5/02, 5/03, 5/04, 5/05 Modular I/O Processors via 1756 ENET/ENBT Module Gateway to 1756-DHRIO or via 1761
NET-ENI.
Supports SLC 5/03, 5/04, 5/05 via DF1 Full and Half Duplex Serial Protocol MicroLogix 1000, 1200, 1500 via 1761-NET-ENI,
DF1 Full and Half Duplex Serial Protocol.
Unsolicited Ethernet is supported by Allen-Bradley PLCs programmed to send PLC-2 type commands. Devices need not be
PLC-2’s. Consult your hardware-programming manual.
Allen-Bradley Bulletin 900 OPC Server – Kepware
OPC-KEP ABBL9
Supports A-B Bulletin 900-TC8, A-B Bulletin 900-TC16 and A-B Bulletin 900-TC32 as detailed in Publication 900-UM004AEN-E – September 2003.
Alstom – SRTP Client / Server – Woodhead
OPC-SST All-In-One Suite
Supports SRTP Ethernet protocol compliant PLCs including Alstom C80-35 and C80-75 devices. Can operate as a Client or
a Server.
Altus – Alnet II Client / Server – Woodhead
OPC-SST All-In-One Suite
Supports Alnet II Ethernet protocol compliant PLCs including Altus AL200x and Webgate devices. Can operate as a Client or
a Server.
Analog Devices OPC Server – Kepware
OPC-KEP AD6BS
Supports Analog Devices 6B series I/O modules 6B11, 6B12, 6B13, 6B21, 6B50.
Aromat/Matsushita/NAIS Ethernet Link OPC Server – Kepware
OPC-KEP ARMCL
Supports Aromat Ethernet protocol compliant PLCs FP0, FPM, FP1 C16, FP1 C24, FP1 C40, FP3, FP10SH and any FP
series PLC with optional ET-LAN Ethernet unit. Supports any FP series PLC (Aromat Computer Link protocol compliant
PLCs) via MEWTOCOL-COM.
AutomationDirect EBC OPC Server – Kepware
OPC-KEP ADEBC
Supports TERMINATOR I/O, H2-EBC, H2-EBC-F, H4-EBC, H4-EBC-F (use NetEdit to manually configure modules to
base), GS1 Drive, GS2 Drive, and DURAPULSE (GS3) Drive via Ethernet.
AutomationDirect / Koyo OPC Server Suite – Kepware
OPC-KEP ATDRT
Supports PLC Direct Ethernet UDP protocol compliant PLCs DL-05, DL-06, DL-230, DL-240, DL-250, DL-260, DL-430, DL440, DL-450 (via an Hx-ECOM module) via Ethernet.
Supports DirectNET protocol compliant PLCs including DL-05, DL-06, DL-230, DL-240, DL-250, DL-260, DL-330, DL-340,
DL-430, DL-440, DL-450 via Koyo DirectNET Hex Mode Protocol over RS-232 or RS-422.
Supports Koyo K Sequence protocol compliant PLCs including SG & SL SERIES, DL-05, DL-06, DL-105, DL-230, DL-240,
DL-250, DL-260, DL-430, DL-440, DL-450 via Koyo K Sequence over RS-232 or RS-422.
BUSWARE Ethernet I/O OPC Server – Kepware
OPC-KEP BUSWR
Supports BUSWARE Ethernet RTUs using Modbus OPEN UDP protocol including E200-FB00, E201-8B00, E290-FB00,
E151-FB00, E190-8B00, E250-FB00, E300-FB00, E191-CB00, M200-FB00, M290-FB00, M151-FB00, M190-8B00, M1814B00, M250-8B00, M300-8B00 via Modbus Open Protocol over Ethernet.
Contrex M-Series OPC Server – Kepware
OPC-KEP CTFMS
Supports the entire line of Contrex M Series motion controllers including M-Cut, M-Rotary, M-Shuttle, M-Track, M-Traverse
(8-byte protocol) and M-Drive, M-Trim, ML-Drive, ML-Trim (4-byte protocol) via M-Series Data-Link Protocol (4-byte/8-byte).
ICONICS, Inc. 100 Foxborough Blvd. • Foxborough, MA 02035 • (508) 543-8600 • FAX (508) 543-1503 • info@iconics.com • www.iconics.com
Page
2 of 10
OPC SERVERS
PL-OPCSVR-EURO
Effective April 1, 2006
For OPC-Enabled HMI/SCADA
Visualize Your Enterprise
Description – Vendor
Prices subject to change without notice
(All OPC Servers Support Windows 98 / NT / 2000 / XP / Server 2003 unless noted)
Contrex Serial OPC Server – Kepware
Model
Number
OPC-KEP CTFCX
Supports Contrex CX1000 motion controllers using Binary Data-Link Protocol via RS-232 or RS-485.
Cutler-Hammer OPC Server – Kepware
OPC-KEP CTRHM
Supports Cutler-Hammer D50/D300 compliant PLCs including D50 & D300 using Cutler-Hammer Hex Mode Protocol via
RS-232 or RS-485.
Dataforth isoLynx OPC Server – Kepware
OPC-KEP DFILX
Supports all ISOLYNX SLX100 data acquisition systems via ISOLYNX protocol over serial lines and Ethernet.
DeviceNet (Hilscher Universal Driver) - Kepware
OPC-KEP HILUN
The DeviceNet Device Driver works in conjunction with our OPC Server KEPServerEX to provide data exchange between
OPC Clients and Hilscher Communications Interface (CIF) cards. Data available through the OPC Server include I/O and
diagnostics information.
Currently supported CIF cards include DeviceNet Master and Profibus DP Master.
The driver requires Hilscher's system configuration software, SyCon, to be installed on the same machine as the OPC
Server.
Fuji Flex OPC Server – Kepware
OPC-KEP FUJFX
Supports Fuji Flex PLCs including NB0, NB1, NB2, NB3, NJ, NS using Fuji Computer Link via RS-232 and RS-485.
GE Fanuc OPC Server Suite – Kepware
OPC-KEP GEFNC
Supports GE PLCs including Series 90-30 311, 313, 331, 341 and Series 90-70 731, 732, 771, 772, 781, 782, Series Five,
Series Six CCM2 (including Expanded I/O) using GE CCM via RS-232 or RS-485. Special Series Six support includes
access to the expanded I/O area of the PLC.
Supports GE PLCs including Series 90-30 311, 313, 331, 341, 350, 360, Series 90-70 731, 732, 771, 772, 781, 782, GE
OPEN (Wide range model support), Horner OCS (Horner’s Operator Control Stations), Versamax Family via Ethernet. This
OPC Server is fully integrated with VersaPro™ and Logic Developer™ programming packages. A smart tag import wizard
makes loading all of the tags in your PLC application a two second operation allowing simple access to all of your application
data for any OPC and DDE enabled program.
Supports all GE devices equipped to handle Ethernet Global Data transactions (EGD Unicast and Multicast packets)
including Series 90-30 with EGD support, Series 90-70 with EGD support via Ethernet. These devices require a CPU-364 or
higher. This driver is also compatible with any device that supports EGD protocol.
Supports GE PLCs including Series GE Micro, Series 90-30 311, 313, 331, 341, 350, 360, Series 90-70 731, 732, 771, 772,
781, 782, GE OPEN (Wide range model support) via GE SNP and GE SNPX protocol over RS-232 and RS-422. . This OPC
Server is fully integrated with VersaPro™ and Logic Developer™ programming packages. A smart tag import wizard makes
loading all of the tags in your PLC application a two second operation allowing simple access to all of your application data
for any OPC and DDE enabled program.
GE Fanuc/Alstom–SNP-X (90-XX and 80-XX Series), Master – Woodhead
OPC-SST All-In-One Suite
Supports GE PLCs including Series 90-30 and Series 90-70 via GE SNPX protocol over RS-232.
GE Fanuc – SRTP Client / Server – Woodhead
OPC-SST All-In-One Suite
Supports GE PLCs including Series C90-30 and Series C90-70 via SRTP Ethernet protocol. Can operate as Client or Server.
GE Focas1 OPC Server – Kepware
OPC-KEP GEFCS
Supports GE CNC controllers of the I series including FANUC Series 15i – Model A, 16i – Model A, 18i – Model A, 21i –
Model A and FANUC Power Mate I – Model D, Model H via TCP/IP (supports the new Unsolicited communications mode of
the Fast Ethernet card) Note: This driver uses and requires the Focas1 Ethernet interface library available from GE Fanuc
for full online operation. The driver allows development of application without the library.
Honeywell OPC Server Suite – Kepware
OPC-KEP HYSTE
Supports Honeywell HC900 hybrid controllers using Modbus TCP/IP protocol via Ethernet.
Supports Honeywell UDC controllers including Honeywell UDC 3000 and 3300 (MODB3K mode) using Modbus RTU
Protocol with Honeywell UDC extensions via RS-232, RS-422 or RS-485.
IA Super SEL OPC Server – Kepware
OPC-KEP IASEL
Supports Intelligent Actuator’s Super SEL Type E & G Controllers and the X-Sel Controllers IA Super SEL Controllers (Type
E & G) and X-Sel Controllers via Serial Communication Protocols.
ICONICS, Inc. 100 Foxborough Blvd. • Foxborough, MA 02035 • (508) 543-8600 • FAX (508) 543-1503 • info@iconics.com • www.iconics.com
Page
3 of 10
OPC SERVERS
For OPC-Enabled HMI/SCADA
Visualize Your Enterprise
Description – Vendor
PL-OPCSVR-EURO
Effective April 1, 2006
Prices subject to change without notice
(All OPC Servers Support Windows 98 / NT / 2000 / XP / Server 2003 unless noted)
Idec Computer Link OPC Server – Kepware
Model
Number
OPC-KEP IDCCL
Supports Idec Computer Link compliant PLCs including Micro1, Micro3, MicroSmart, OpenNet, FA2J, FA2, FA3S-CP11,
FA3S-CP12 via Idec ASCII Protocol over RS-232 or RS-485.
Iotech PointScan 100 OPC Server – Kepware
OPC-KEP IOTPS
Supports PointScan Ethernet RTUs including Iotech PointScan 100 and 200 modules (connected through a PointScan 100
module) via Modbus OPEN UDP protocol over Ethernet.
Krauss-Maffei MC4 Ethernet – Kepware
OPC-KEP KRMFE
Supports compliant Krauss-Maffei MC4-Injection Molding Machines including MC4 via TCP/IP transport protocol.
Micro-DCI OPC Server – Kepware
OPC-KEP FPMDC
Supports Fischer & Porter MicroDCI controllers including 53MC1000, 53MC2000, 53MC4000, 53MC5000 via Micro-DCI
DataLink Protocol over RS-232 or RS-485. Binary mode switching through the configuration port is supported.
Mitsubishi A Series Serial OPC Server – Kepware
OPC-KEP MITSU
Supports Mitsubishi all Serial and A Series PLCs including A61PEU, A62PEU, A61P-UL, A273UHCPU, A273UHCPU-S3, A272B,
A275B, A278B, A273EX, A278LX, MR-HENC, A171SCHPUN, A172SCHPUN, A173UHCPU (-S1), A172B, A175B, A178B,
A178B-S1/S2/S3, A172SENC via the AJ71C24 communications Card (Format 1 with Checksum Enabled) over RS-232 or RS-422.
Mitsubishi CNC Ethernet OPC Server – Kepware
OPC-KEP MITSU
Supports the Mitsubishi C64 CNC Controller using Ethernet.
Mitsubishi Ethernet OPC Server – Kepware
OPC-KEP MITSU
Supports all Mitsubishi A and Q Series PLCs via the AJ71E71 family of communication card using Ethernet.
Mitsubishi – Melsec Client / Server – Woodhead
OPC-SST All-In-One Suite
Supports all Mitsubishi A and Q Series PLCs using Ethernet.
Mitsubishi FX OPC Server – Kepware
OPC-KEP MITSU
Supports Mitsubishi FX PLCs including FX, FX0, FX0N, FX2N via Direct Serial over RS-232 and RS-422.
Mitsubishi FX Net OPC Server – Kepware
OPC-KEP MITSU
Supports Mitsubishi FX PLCs including FX, FX2C, FX0N, FX2N connected via FX NET (Format 1, Checksum) over RS-232 or RS-422.
Modbus ASCII & RTU, Master / Slave – Woodhead
OPC-SST All-In-One Suite
Supports any devices, which are compatible with the Modbus RTU or ASCII protocols. Can operate as Modbus Master or
Slave station over RS-232.
MODBUS DA & AE OPC Server – ICONICS
OPC-MODBUS V3
OPC compliant, 32 bit, multi-threaded Windows based device driver, which can operate stand-alone or supply direct
rd
interface to GENESIS32 OPC Client Application Modules or OPC connection to other 3 Party OPC applications. Provides
OPC Tag Browsing, OPC Ranging and includes an OPC client test application. Supports: Any compatible Modbus device.
Has Alarm & Event Server 1.0 built in!
MODBUS DA Only OPC Server – ICONICS
OPC-MODBUS
OPC compliant, 32 bit, multi-threaded Windows based device driver, which can operate stand-alone or supply direct
rd
interface to GENESIS32 OPC Client Application Modules or OPC connection to other 3 Party OPC applications. Provides
OPC Tag Browsing, OPC Ranging and includes an OPC client test application. Supports any devices, which are
compatible with the Modbus RTU or ASCII protocols.
MODBUS Ethernet OPC Server – ICONICS
OPC compliant, 32 bit, multi-threaded Windows based device driver, which can operate stand-alone or supply direct
rd
interface to GENESIS32 OPC Client Application Modules or OPC connection to other 3 Party OPC applications. Provides
OPC Tag Browsing, OPC Ranging and includes an OPC client test application. Supports Momentum & Quantum series
PLCs via Ethernet connection.
Modicon Networks MBX OPC Server Suite – Cyberlogic
OPC-MODBUS
ETHERNET
OPC-CYB-MBX
This all-in-one OPC server suite includes the worldwide standard communication drivers for Modbus. Supports all Modicon
Modbus Plus network adapters, Gateway for remote access to all Modicon networks, Modbus Ethernet TCP/IP
communications, Serial Modbus RTU & ASCII communications and includes a Virtual MBX Driver for enabling 16-bit legacy
applications in 32-bit Windows.
Supports Modicon 184, 384, 484, 584, 884, 984, Micro 84, Modcell, Quantum, Momentum families of PLCs as well as any
Modbus compatible device.
Supports Modicon SA-85-00, SA-85-02 (Dual Channel), SM-85, AT-984-AT0, AT-984-AT2, AT-984-AT4, MC-984, Atrium,
PCI-85 (416NHM30030), PCI-85 (416NHM30032) (Dual Channel), PCMCIA (416NHM21200) (Type II), PCMCIA
(416NHM21203) (Type III) and PCMCIA (416NHM21234) (Type III PnP) adapters.
ICONICS, Inc. 100 Foxborough Blvd. • Foxborough, MA 02035 • (508) 543-8600 • FAX (508) 543-1503 • info@iconics.com • www.iconics.com
Page
4 of 10
OPC SERVERS
For OPC-Enabled HMI/SCADA
Visualize Your Enterprise
Description – Vendor
PL-OPCSVR-EURO
Effective April 1, 2006
Prices subject to change without notice
(All OPC Servers Support Windows 98 / NT / 2000 / XP / Server 2003 unless noted)
Model
Number
The MBX OPC Server Suite has integrated fault-tolerant communication features not found in other OPC servers. Multiple,
priority-based access paths can be used to build true redundant communication architecture below the server level. The
built-in Health Watchdog monitors the health of all network connections to all physical devices. The auto-switching access
paths can be configured to quickly redirect communications to an unlimited number of plant-floor devices and networks.
Using Auto-configuration and DirectAccess™ features, a user can configure a minimal server setup with a single mouse click
and gain access to all the registers in each network node without any user configuration.
MBX OPC Server Suite supports the latest OPC specifications XML Data Access 1.0, Data Access 3.0, 2.05a, 1.0a and
Alarms & Events 1.1 and is compliance-certified using the OPC Foundation’s compliance program.
Open Modbus TCP, Client / Server – Woodhead
OPC-SST All-In-One Suite
Supports Schneider – Modbus Ethernet protocol compliant PLCs including Modbus Ethernet. Can operate as a Client or a Server.
Modicon Modbus OPC Server Suite - Kepware
OPC-KEP MDBUS
Supports Modbus ASCII protocol compliant PLCs and Devices including any Modbus ASCII™ Compliant PLC, Any service
supporting Modbus ASCII, Flow Computers (using the Daniels/Omni/Elliot register addressing) via RS-232 or RS-422.
Supports Modbus Ethernet protocol compliant PLCs including Modbus Ethernet, Modicon Mailbox, Fluenta FGM, Roxar
RFM, Instromet via IP addressing (Ethernet). Supports Modicon Ethernet to Modbus Plus bridging, Multiple or Single socket
usage for better gateway resource management and Tag import from Concept and ProWORX programming packages.
Supports Modbus Plus protocol compliant PLCs via up to four SA85 cards in one PC including SA85-PCI Interface card,
SA85 (-002 and -001) PC Interface Cards and SA85-PCMCIA (Windows95 only). Note: The following SA85 cards are
supported Modbus Plus ISA PC Adapter Card (Schneider part#: AM-SA85-030), Modbus Plus PCI PC Adapter Card
(Schneider part#: 416 NHM 300 30), Modbus Plus Type II PCMCIA Card (Schneider part#: 416 NHM 212 30), Modbus Plus
Type III PCMCIA Card (Schneider part#: 416 NHM 212 33) and Modbus Plus Type III PnP PCMCIA Card (Schneider part#:
416 NHM 212 34)
Supports Modbus RTU protocol compliant PLCs and Devices including Modbus compatible devices, Elliott Flow Computer,
Magnetek GPD 515 Drive, Omni Flow Computer, Daniel S500 Flow Computer, Dynamic Fluid Meter via serial RS-232 or
RS-422. Note: Special handling has been added to support the native memory formats of the Omni Flow computer including
string support. Additional configuration parameters allow this driver to tailored to a wide range of Modbus RTU compatible
devices including JBUS.
Supports Modbus RTU Slave mode, which allows an OPC client application to appear as a Modbus RTU addressed (1 to
247) device on the network. The slave mode allows the server to receive data by exception from a Modbus RTU master.
Typical applications include connectivity with larger DCS systems that utilize Modbus RTU.
Moeller OPC Server - ICONICS
OPC-MOELLER
OPC compliant, 32 bit, multi-threaded Windows based device driver, which can operate stand-alone or supply direct
rd
interface to GENESIS32 OPC Client Application Modules or OPC connection to other 3 Party OPC applications. Provides
OPC Tag Browsing, OPC Ranging and includes an OPC client test application. Supports PS4-141, PS4-151, PS4-201,
PS4-341, PS416-CPU-200/300/400 utilizing the SUCOM-A serial protocol. Supports Windows NT/2000/XP only.
Moore Procidia Modbus OPC Server – Siemens Moore (ICONICS)
OPC-PROCIDIA MODBUS
OPC compliant, 32 bit, multi-threaded Windows based device driver, which can operate stand-alone or supply direct
rd
interface to GENESIS32 OPC Client Application Modules or OPC connection to other 3 Party OPC applications. Provides
OPC Tag Browsing, OPC Ranging and includes an OPC client test application. Requires Moore Products 32 bit APACS API
& MODULBUS Interface (MBI) card installed in the host computer. Supports Moore Products ACM Modules.
Moore Procidia LIL OPC Server – Siemens Moore (ICONICS)
OPC-PROCIDIA LIL
OPC compliant, 32 bit, multi-threaded Windows based device driver, which can operate stand-alone or supply direct
rd
interface to GENESIS32 OPC Client Application Modules or OPC connection to other 3 Party OPC applications. Provides
OPC Tag Browsing, OPC Ranging and includes an OPC client test application. The server communicates to the MYCRO
Instrument Link, which provides communication to a station connected to the Moore Model 320 LIL.
Omron OPC Server Suite - Kepware
OPC-KEP OMRNF
Supports Omron FINS protocol compliant PLCs and Sysmac Link operation to access additional PLCs via the Sysmac Net
including C200H, C200HE, C200HE-Z, C200HG, C200HG-Z, C200HS, C200HX, C200HX-Z, C500, C1000H, C2000H,
CQM1H, CS1G, CS1H, CV500, CV1000, CV2000, CVM1-V2 via UDP/IP over Ethernet, FINS Gateway for Sysmac Link and
Sysmac Net access and Auxiliary Relay.
-Supports Omron Host Link protocol compliant PLCs including C20H, QM1, CQM1, C200, C200H, C500, C1000, Open via
RS-232 or RS-422.
-Supports Omron Temperature Controllers including E5AX-A, E5AX-AH, E5AX-DAA, E5AX-PRR, E5AX-VAA, E5AF-A,
E5AF-AH, E5AJ-A, E5EJ-A, E5CN (thermocouple), E5CN (platinum resistance thermometer), E5GN (thermocouple) and
E5GN (platinum resistance thermometer) via Sysway.
-The Omron Toolbus Driver was designed to plug into our industrial based communications server product. This product
supplies reliable data access to any HMI, SCADA, Historian, or Enterprise application that supports OPC, DDE, FastDDE,
and SuiteLink.
ICONICS, Inc. 100 Foxborough Blvd. • Foxborough, MA 02035 • (508) 543-8600 • FAX (508) 543-1503 • info@iconics.com • www.iconics.com
Page
5 of 10
OPC SERVERS
For OPC-Enabled HMI/SCADA
Visualize Your Enterprise
Description – Vendor
PL-OPCSVR-EURO
Effective April 1, 2006
Prices subject to change without notice
(All OPC Servers Support Windows 98 / NT / 2000 / XP / Server 2003 unless noted)
Omron – FINS (C, CV, CS), Client / Server – Woodhead
Model
Number
OPC-SST All-In-One Suite
Supports Omron FINS protocol compliant PLCs via the Sysmac Net including C, CS and CV Series via Ethernet.
Optimation OptiLogic OPC Server - Kepware
OPC-KEP OPTLG
Supports OptliLogic Ethernet RTUs including OL4054, OL4058, OL2208, OL2211, OL2201, OL2108, OL2109, OL2111,
OL2408, OL2418, OL2252, OL3406, OL3420, OL3440, OL3850 via Ethernet (UDP protocol).
Partlow ASCII OPC Server - Kepware
OPC-KEP PTLWA
Supports Partlow ASCII protocol compliant devices including MIC 1160, 1161, 1400, 1401, 1460, 1800, 1801, 1810, 2000,
3200, 6000 and MRC 7000, 7700, 8000 via RS-232 or RS-422.
Philips P8/PC20 OPC Server - Kepware
OPC-KEP PHLPS
Supports Philips PLCs including PC20 (using the CI21 or VI21 card), MC30 ((using the CI30 card), MC31, MC41, ISCOS 10,
ISCOS 60, ISCOS 70 via Philips Programmable Controller Communication Protocol (PPCCOM) over RS-232.
Profibus (Hilscher Universal Driver) - Kepware
OPC-KEP HILUN
The Hilscher Universal device driver provides data exchange between OPC clients and Hilscher Communications Interface
(CIF) cards (Profibus DP Master). Data available through the OPC Server include I/O and diagnostics information. The driver
requires Hilscher's system configuration software, SyCon, to be installed on the same machine as the OPC Server.
SattBus Ethernet - Kepware
OPC-KEP SATBE
The SattBus Ethernet device driver provides data exchange between OPC clients and Sattcon devices communicating via
the SattBus Ethernet interface. A standard Ethernet interface is used as the hardware for connecting PC's to a SattBus
system with Ethernet capability.
SattBus Serial - Kepware
OPC-KEP SATBS
The SattBus Serial device provides data exchange between OPC Clients and Sattcon PLCs. The SattBus PC-board is used
as the hardware interface for connecting PC's to a SattBus system. The SattBus PC-board is implemented as a standard I/O
channel board. The PC-board is equipped with a dual port RAM chip that is mapped into the host processor memory area.
Scanivalve Ethernet OPC Server - Kepware
OPC-KEP SCNVE
Supports Scanivalve Ethernet protocol compliant PLCs including DSA3200, DTS3250 via Ethernet.
Schneider – Uni-Telway Slave, Client / Server – Woodhead
OPC-SST All-In-One Suite
Supports Schneider Unit-Telway protocol compliant PLCs including TSX 17, 37, 57 Series. Can act as a Client or a Server
operating in Slave mode.
Schneider – UNI-TE Client / Server – Woodhead
OPC-SST All-In-One Suite
Supports Schneider Unit-Telway Ethernet protocol compliant PLCs including Premium and Micro Series. Can act as a Client or a Server.
Siemens S5 OPC Server - Kepware
OPC-KEP SMS5A
Supports Siemens S5 PLCs including Siemens S5 - 90U, 95U, 100U – 100, 100U - 101, 100U - 103, 101U, 115U - 941,
115U – 942, 115U – 943, 115U – 944, 115U – 945, 135U – 921, 135U – 922, 135U – 928, 155U – 946, 155U - 947 using
AS511 Current Loop via a direct connection to the programming port of the PLC with the programming cable or RS-232.
Siemens – AS511 (Simatic S5 Series), Master – Woodhead
OPC-SST All-In-One Suite
Supports Siemens S5 PLCs including Siemens Simatic S5 Series using AS511 Current Loop via a direct connection to the
programming port of the PLC with the programming cable or RS-232. Can only operate as a Master.
Siemens – Industrial Ethernet, Client / Server – Woodhead
Siemens S5 3964R OPC Server - Kepware
OPC-SST All-In-One Suite
OPC-KEP SMS5R
Supports Siemens S5 PLCs including 115U – 941, 115U – 942, 115U – 943, 115U – 944, 115U – 945, 135U – 921, 135U – 922,
135U – 928, 155U – 946, 155U - 947 via a communications processor card (such as the CP 544) configured to use the 3964R, or
3964 protocols and the RK 512 computer link. Multiple CPU systems are supported.
Siemens S7 MPI OPC Server - Kepware
OPC-KEP SMS7M
Supports Siemens S7-300 and S7-400 PLCs using the Multi Point Interface (MPI) S7-300/400 serial port adapter (Siemens
part #6ES7 – 972 – OCA23 – OXAO).
Siemens S7 200/300/400 TCP/IP Ethernet OPC Server - Kepware
OPC-KEP SMS7E
Supports Siemens S7-200, S7-300 and S7-400 PLCs using TCP/IP Ethernet protocol.
Supports Siemens S7-300 and S7-400 PLCs using the NetLink adapter cable. The NetLink adapter provides a low cost
method of accessing either a Siemens S7-300 or S7-400 PLC via Ethernet without the need of the CP343 or CP443
communications card. NetLink offers a considerable savings for budget conscience projects.
Siemens S7 200 OPC Server - Kepware
OPC-KEP SMS7P
Supports Siemens S7-200 PLCs including S7-212, S7-214, S7-215, S7-216, S7-224 or any Siemens S7-200 devices using
PPI (11Bit) or PPM (10Bit) protocol via RS-232 or RS-485. Direct support for the EM241 Modem Module.
ICONICS, Inc. 100 Foxborough Blvd. • Foxborough, MA 02035 • (508) 543-8600 • FAX (508) 543-1503 • info@iconics.com • www.iconics.com
Page
6 of 10
OPC SERVERS
For OPC-Enabled HMI/SCADA
Visualize Your Enterprise
Description – Vendor
PL-OPCSVR-EURO
Effective April 1, 2006
Prices subject to change without notice
(All OPC Servers Support Windows 98 / NT / 2000 / XP / Server 2003 unless noted)
Siemens – PPI/PPI+ (Simatic S7-200 Series), Master – Woodhead
Model
Number
OPC-SST All-In-One Suite
Supports Siemens S7-200 PLCs or any Siemens S7-200 devices using PPI (11Bit) or PPM (10Bit) protocol via RS-232 or RS-485.
Siemens TIWAY Host Adapter OPC Server - Kepware
OPC-KEP SIUTW
Supports all Simatic/TI TIWAY compatible controllers and Siemens TIWAY compatible PLCs using TIWAY 1, TIWAY 1
UNILINK Host Adapter over the Non-Intelligent Terminal Protocol (NITP) including TIWAY Secondary Devices. Supports up
to 254 stations.
Siemens – Ti Dir (Simatic Ti-505 Series), Master – Woodhead
OPC-SST All-In-One Suite
Supports Simatic/TI 505 Series compatible controllers and PLCs.
Siemens Simatic 505 Ethernet OPC Server - Kepware
OPC-KEP SM55E
Supports Siemens Simatic 505 PLCs including TI 525 (via CP2572 Ethernet), TI 545, TI 555, TI 565 (via CP2572 and
CP2572A Ethernet, CP1434-TCP) via User Datagram Protocol (UDP), Transfer Control Protocol (TCP) or Ethernet.
Siemens Simatic 505 Serial OPC Server - Kepware
OPC-KEP SM505
Supports Siemens Simatic 505 PLCs including TI 520, 525, 535, 545, 555, 565, 575 via Non-Intelligent Terminal Protocol
(NITP) or Transparent Byte protocol (TB).
SIXNET EtherTRAK OPC Server - Kepware
OPC-KEP SIXET
Supports SIXNET EtherTRAK RTUs including Master Open, Slave, all SIXNET EtherTRAK I/O, SIXNET RemoteTRAK I/O,
SIXNET VersaTRAK RTUs, SIXNET SIXTRAK gateways using both SIXNET UDR (Universal Driver) protocol over serial
lines and Modbus OPEN UDP protocol over Ethernet.
SquareD SY/MAX OPC Server - Kepware
OPC-KEP SQRDS
Supports SquareD PLCs including SY/MAX Programmable Controllers and SquareD PowerLogic monitors via SY/MAX
Point-to-Point Communications Protocol over RS-232 or RS-422.
Telemecanique Unitelway OPC Server - Kepware
OPC-KEP TLMUW
Supports Telemecanique Unitelway protocol compliant PLCs including TSX 07, TSX 17, TSX 37, TSX 47, TSX 57, Small
Frame, Large Frame via Unitelway RS-485.
ThermoWestronics Ethernet OPC Server - Kepware
OPC-KEP THWSV
Supports SV100 and SV180 Data Acquisition systems using TCP/IP (ETHERNET) SV100 & SV 180, (SERIAL) SERIES
1200/1600/3000, SM100, SV100, & SV180 using Modbus Ethernet.
TIWAY Host Adapter OPC Server - Kepware
OPC-KEP SIUTW
Supports all Simatic/TI TIWAY compatible controllers and Siemens TIWAY compatible PLCs using TIWAY 1, TIWAY 1
UNILINK Host Adapter over the Non-Intelligent Terminal Protocol (NITP) including TIWAY Secondary Devices. Supports up
to 254 stations.
Toshiba OPC Server Suite - Kepware
OPC-KEP TSBEN
Supports Toshiba ASCII Computer Link compliant PLCs link including all T2 series models with Ethernet option/card and all
T3 series models with Ethernet option/card via Ethernet.
Supports Toshiba ASCII Computer Link compliant PLCs including EX100, EX200, T1-16, T1-28, T1-40, T1 Super, T2,
T3, T3H series models via RS-232 or RS-422.
TOYOPUC Ethernet PC3/PC2 OPC Server - Kepware
OPC-KEP TYP3E
Supports TOYOPUC (Programmable Controller) PC3 and PC2 Ethernet compliant PLCs including PC3/PC2 Interchange, PC3
Device via TOYOPUC PC3/PC2 Ethernet Computer Link Protocol over Ethernet.
TOYOPUC PC2 Serial OPC Server - Kepware
OPC-KEP TYPCL
Supports TOYOPUC Computer Link compliant PLCs including PC2 Series or any Computer Link compatible device via
Computer Link over RS-232, RS-422 or Multi-drop RS485 (1 to N).
Triconex Ethernet - Kepware
OPC-KEP TRCXE
The Triconex device driver works in conjunction with our OPC Server KEPServerEX to provide data exchange between OPC
Clients and Tricon and Trident controllers.
ICONICS, Inc. 100 Foxborough Blvd. • Foxborough, MA 02035 • (508) 543-8600 • FAX (508) 543-1503 • info@iconics.com • www.iconics.com
Page
7 of 10
OPC SERVERS
For OPC-Enabled HMI/SCADA
Visualize Your Enterprise
Description – Vendor
PL-OPCSVR-EURO
Effective April 1, 2006
Prices subject to change without notice
(All OPC Servers Support Windows 98 / NT / 2000 / XP / Server 2003 unless noted)
WAGO Ethernet OPC Server - Kepware
Model
Number
OPC-KEP WAGOE
Supports WAGO Ethernet I/O including 750-342 Buscoupler for Ethernet TCP/IP & 750- Programmable Fieldbus Controller
for Ethernet TCP/IP via Modbus Open Protocol over Ethernet.
Yaskawa Memobus Plus OPC Server - Kepware
OPC-KEP YKWMP
Supports Memobus Plus protocol compliant Yaskawa PLCs including SA85-PCI, SA85-001, SA85-002, SA85-PCMCIA
(Windows95 only - Requires the Modicon MBPLUS.VXD driver) using up to four SA85 cards in one PC.
Yaskawa MP Ethernet OPC Server - Kepware
OPC-KEP YKWME
Supports Yaskawa MP 920 PLCs including Yaskawa MP 920 Series CPU (equipped with 218IF Ethernet communication
modules) via Ethernet TCP/IP Communications.
Yokogawa Darwin OPC Server - ICONICS
OPC-DARWIN
OPC compliant, 32 bit, multi-threaded Windows based device driver, which can operate stand-alone or supply direct interface to
GENESIS32 OPC Client Application Modules or OPC connection to other 3rd Party OPC applications. Provides OPC Tag
Browsing, OPC Ranging and includes an OPC client test application. Supports DA2500/HR2500, HR2400, MICROR, VR, MICROS
Series. Communicates using RS232, RS422 GP-IB and Ethernet.
Yokogawa Green Series OPC Server - ICONICS
OPC-GREEN SERIES
OPC compliant, 32 bit, multi-threaded Windows based device driver, which can operate stand-alone or supply direct
interface to GENESIS32 OPC Client Application Modules or OPC connection to other 3rd Party OPC applications. Provides
OPC Tag Browsing, OPC Ranging and includes an OPC client test application. Supports Yokogawa Green Series UM 300
Series, UP 300 Series, UT 300 Series, UP 500/700 Series, UT 500/700 Series. Also Supports DA2500/HR2500, HR2400,
MICROR, VR, MICROS Series. Communicates using RS232 and Ethernet.
Yokogawa Green Series - Kepware
OPC-KEP YKGRN
The Yokogawa Green Series Controller Serial Device Driver was designed to plug into the Kepware industrial based
communications server product. This product supplies reliable data access to any HMI, SCADA, Historian, or Enterprise
application that supports OPC, DDE, FastDDE, and SuiteLink. This driver is intended for use with Controller communication
devices such as UT37, UT38, and UP27 as well as devices that support the standard PCLink communications protocol.
Yokogawa OPC Server Suite - Kepware
OPC-KEP YKWDE
Supports Yokogawa CX 1000/2000 Control systems including CX1006, CX1206, CX2010, CX2020, CX2210, CX2220,
CX2410, CX2420, CX2610, CX2620, via Ethernet TCP Communications.
Supports Yokogawa Darwin Data Acquisition systems including DA100-1, DA100-2, DR131, DR231, DR232, DR241,
DR242, DC100-1, DC100-2 via Ethernet TCP/IP Communications.
Supports Yokogawa DX 100/200 Data Acquisition systems including DX102, DX104, DX106, DX112, DX204, DX208,
DX210, DX220, DX230, MV100, MV200 via Ethernet TCP communications.
Supports Yokogawa DX 100/200 Data Acquisition systems including AX100, DX102, DX104, DX106, DX112, DX204,
DX208, DX210, DX220, DX230, MV100, MV200 via RS-232 or RS-422/485 serial communications.
Supports Yokogawa DXP 100/200 Data Acquisition systems including DXP100, DXP200 via Ethernet TCP communications.
Supports Yokogawa HR 2400 Data Acquisition systems and Data Recorder devices including HR 2400 (10Channels),
HR 2400 (20Channels), HR 2400 (30Channels) via RS-232 or RS-422/485 communications.
Yokogawa MX Ethernet - Kepware
OPC-KEP YKWDE
The Yokogawa MX device driver works in conjunction with our OPC Server KEPServerEX to provide data exchange between OPC
Clients and Yokogawa MX 100 Data Acquisition devices using TCP/IP.
Yokogawa YS100 Serial - Kepware
OPC-KEP YKCTL
The Yokogawa YS100 Serial Device Driver was designed to plug into our industrial based communications server product and is
intended for use with the Yokogawa YS100 family of serial devices.
Notes: All Kepware drivers with Serial Protocols have Modem Support, OPC Data Access Version 1.0a and 2.05a.
ICONICS, Inc. 100 Foxborough Blvd. • Foxborough, MA 02035 • (508) 543-8600 • FAX (508) 543-1503 • info@iconics.com • www.iconics.com
Page
8 of 10
OPC SERVERS
For OPC-Enabled HMI/SCADA
Visualize Your Enterprise
PL-OPCSVR-EURO
Effective April 1, 2006
Prices subject to change without notice
Special OPC Servers
Description – Vendor
(All OPC Servers Support Windows 95 / 98 / NT / 2000 / XP / Server 2003 unless noted)
DATA Store OPC Server - ICONICS
Model
Number
OPC-DataStore
OPC compliant, 32 bit, multi-threaded Windows based device driver, which can operate stand-alone or supply direct
rd
interface to GENESIS32 OPC Client Application Modules or OPC connection to other 3 Party OPC applications. Provides
OPC Tag Browsing, OPC Ranging and includes an OPC client test application. Supports both DA and A&E. Read and Write
OPC data to Microsoft Access Databases.
Advanced Simulator Driver – Kepware
OPC-KEP ADVSM
The Advanced Simulator Driver was designed to plug into Kepware’s industrial based communications server product. This
driver provides single-point access to multiple ODBC data sources via ODBC. The driver simulates live data by traversing
through all the records in a selected table at a rate set by the user.
DDE OPC Server - ICONICS
OPC-DDE
OPC compliant, 32 bit, multi-threaded Windows based device driver, which can operate stand-alone or supply direct
rd
interface to GENESIS32 OPC Client Application Modules or OPC connection to other 3 Party OPC applications. Provides
OPC Tag Browsing, OPC Ranging and includes an OPC client test application. Supports all DDE protocol communication
servers.
DDE Client Driver - Kepware
OPC-KEP DDECC
Supports legacy DDE Server applications that support the standard "CF TEXT" DDE data format. Can be used with any
DDE server that supports standard Microsoft DDE.
GENESIS for Windows & GENESIS for DOS OPC Server - ICONICS
OPC-GEN
OPC compliant, 32 bit, multi-threaded Windows based device driver. Provides OPC Tag Browsing, OPC Ranging and
includes an OPC client test application. Provides OPC data communications to any GENESIS for DOS GEN-NET or GENrd
NODE system or GENESIS for Windows, RTS, I/O Servers to/from GENESIS32 or 3 party OPC clients. Requires GFW
Project Manager. Supports Windows 95/98/NT only.
InTouch Client Driver / OPC Server - Kepware
OPC-KEP WWINT
Supports exposing Wonderware InTouch tag databases to OPC clients. Wonderware InTouch 7.1 or higher is required. InTouch 7.11 and
higher cannot be installed on Windows 98 systems. Windows NT/2000/XP only
ODBC Client Driver - Kepware
OPC-KEP ODBCI
Supports read and write to Microsoft Access, Microsoft SQL, Oracle and Sybase databases via ODBC API. Provides singlepoint access to multiple ODBC data sources via ODBC (Open DataBase Connectivity). The goal of ODBC is to make it
possible to gather any data from any application, regardless of which database management system (DBMS) is handling the
data. Required: MDAC - Microsoft Data Access Components.
Simulator DA & AE OPC Server - ICONICS
OPC-SIMULATOR
OPC compliant, 32 bit, multi-threaded Windows based device driver, which can operate stand-alone or supply direct
rd
interface to GENESIS32 OPC Client Application Modules or OPC connection to other 3 Party OPC applications. Provides
OPC Tag Browsing, OPC Ranging. Provides simulated data for both OPC Data Access and OPC Alarms & Events. Includes
ramp, sine, square wave, saw tooth and many other simulated signals.
User-Configurable Driver (U-CON) OPC Server - Kepware
OPC-KEP UCOND
Quickly and easily develop communications drivers for any Serial or Ethernet device. Supports OPC 1.0 AND 2.0 with Tag
Browsing, Automatic Tag Database generation, DDE Support, NT Service support, Diagnostics, and Event Logging are
included. Development of a driver profile requires access to the protocol documentation of the target device. A working
understanding of general device communications is highly recommended.
Note: All Kepware drivers with Serial Protocols have Modem Support, OPC Data Access Version 1.0a and 2.05a.
ICONICS, Inc. 100 Foxborough Blvd. • Foxborough, MA 02035 • (508) 543-8600 • FAX (508) 543-1503 • info@iconics.com • www.iconics.com
Page
9 of 10
OPC SERVERS
For OPC-Enabled HMI/SCADA
Visualize Your Enterprise
PL-OPCSVR-EURO
Effective April 1, 2006
Prices subject to change without notice
Windows CE OPC Servers
€ when purchased with a PanelWorX license
Description – Vendor
(All OPC Servers Support Windows 95 / 98 / NT / 2000 / XP / Server 2003 unless noted)
Allen-Bradley OPC Server CE - ICONICS
Model
Number
OPC-AB CE
Allen Bradley PLC5, SLC5xx, MicroLogix & ControlLogix 5550 PLCS through DF1 RS232 Serial, DH+ via 1770-KF2
interfaces, DH-485 via 1747-KE or 1770-KF3 interfaces and TCP/IP Ethernet networks. Does NOT require AB RSLinx.
Works with SH3/4, MIPS, X86
Allen-Bradley DF1 CE - ICONICS
OPC-AB DF1 CE
Allen Bradley PLC5, SLC5xx, MicroLogix & ControlLogix 5550 PLCS - DF1 RS232 Serial
Modbus OPC Server CE - ICONICS
OPC-MODBUS CE
Modbus Serial ASCII/RTU & Modbus TCP/IP Ethernet to Modicon Quantum, 984, Momentum, and other Modbus compatible
devices. Works with SH3/4, MIPS, X86. Modbus Plus support via PC104 cards available on X86 based CE platforms (only).
Modbus Serial OPC Server CE – ICONICS
OPC-MODBUS SER CE
Modbus Serial ASCII/RTU and other Modbus compatible devices
Modbus Ethernet OPC Server CE - ICONICS
OPC-MODBUS ETH CE
Modbus TCP/IP Ethernet to Modicon Quantum, 984 & Momentum PLCs
Note: All Kepware drivers with Serial Protocols have Modem Support, OPC Data Access Version 1.0a and 2.05a.
ICONICS, Inc. 100 Foxborough Blvd. • Foxborough, MA 02035 • (508) 543-8600 • FAX (508) 543-1503 • info@iconics.com • www.iconics.com
Page
10 of 10
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising