Eaton | Powerware 9155 | Eaton 9155 UPS - Eaton Corporation

Eaton 9155 UPS - Eaton Corporation
Powerware series
Eaton 9155 UPS
8-15 kVA
Product Introduction
Product Snapshot
Technology:
Split-phase double-conversion
online UPS
Power Rating:
8 kVA, 10 kVA, 12 kVA and 15 kVA
at 0.9 power factor
Input Voltage:
200–240 Vac with Neutral or with
optional input isolation transformer
Output Voltage:
100/200, 110/220, 120/240 Vac 180°
phase displacement; 120/208,
127/220 Vac 120°
phase displacement
Frequency:
50/60 Hz auto-sensing
Dimensions:
32.2” H x 12” W x 32.5” D
Configuration:
Small-footprint tower, black
Battery Backup:
Up to 29 minutes typical, extendable up
to four hours (See battery backup charts)
9155 8-15 kVA
Reliability and efficiency have never looked so attractive.
The 9155 single-phase Uninterruptible Power System (UPS)
delivers a combination of advanced technology, userfriendly design and low price that's absolutely unmatched
by competing products. This innovative design offers high
efficiency (90 percent or better across all load ranges), low
input current distortion (less than 5 percent total harmonic
distortion, with an active IGBT rectifier that delivers 0.99
power factor correction) and high power factor output
(0.9 PF).
With advances being made in miniaturization and processing
power and more equipment being served by dual-cord
power supplies, the challenge of protecting that power, and
doing so in a limited space, grows ever greater.
Fortunately, advances in technology have also meant
that more power protection per square foot can now be
provided. The 9155 delivers premium levels of efficiency,
reliability and flexibility, all in a sleek tower half the size of
most other units on the market today.
Features of the Eaton 9155 UPS
• A true online, double-conversion topology protects
connected equipment from all nine of the most common
power problems
• Delivers maximum power density in a compact tower
design: 12” wide and 33” deep, including batteries
• Provides more real power in less space (5,500 watts per
square foot) with a 0.9 output power factor – protecting
more equipment for every utility dollar and leaving more
room for expansion of the data center
• Patented Powerware Hot Sync® paralleling of multiple
modules delivers extra capacity or redundancy
•C
ustomizable output distribution provides user-specified
power outlets along with terminals for connecting hardwired equipment
•M
icroprocessor-controlled ABM® technology significantly
increases battery life
• Provides a 0.99 input power factor and generator friendly
<5% total harmonic distortion using an active IGBT
rectifier to control the input power factor
• Ensures data and system integrity with complete
power management software for remote monitoring,
management and shutdown
• An Eaton factory limited warranty, technical support and
optional service plans provide investment protection and
peace of mind
2
EATON CORPORATION
9155 UPS
Premium power protection is now easier
than ever.
Scalable architecture meets current and
future load requirements.
With raised-floor real estate at a premium, you’ll appreciate
that the 9155 requires only three to six square feet of floor
space, including internal batteries. Such a small footprint
gives you more location options and more space available
for future expansion.
Eaton 9155 UPSs are available in four models: 8, 10, 12
and 15 kVA, so you can choose the configuration that most
closely meets your own capacity requirements and price
point. And you can scale from there. Using our signature
Hot Sync paralleling technology, up to three 9155 modules
can be paralleled for extra capacity or redundancy. A 15
kVA UPS, for example, can grow to support loads of up to
45 kVA. There's no dependence on communications wiring
among these modules, enhancing reliability and simplifying
installation. This paralleling capability Is far more easily
achieved than is the case with competitors' products.
Equipment installation is inexpensive and easy – essentially
plug-and-play. You can order 9155 models with your choice
of more than 19 types of output receptacles. To rearrange
or add data center equipment, you simply unplug from the
old receptacle and plug into a new one – no need for an
electrician to run new conduit and wiring.
Inside view of 9155 Parallel
Cabinet Maintenance Bypass
Powerware Hot Sync Redundant/Capacity
9155 UPS Parallel Cabinet
Load
Battery innovations optimize battery performance and service life.
Standard internal batteries provide power until auxiliary power takes over or systems
are gracefully shut down. Battery runtime can be extended to hours by adding matching
Extended Battery Modules (EBM).
Eaton 9155 8-15 kVA UPS Backup Times (In Minutes)
Eaton 9155 8-15 kVA UPS Backup Times (In Minutes)
VA
UPS
(1) (2) (3) (4)
UPS
(1)
(2)
(3)
+ Internal EBM EBM EBM EBM + Internal EBM EBM EBM
Watt 32 Battery 64
64
64
64 64 Battery 96
96
96
15000 13500
4.6
23.0 43.0 65.1 88.6
13.3
43.0 76.7
113
7500
6750
13.1
53.2 99.7
151
205
32.3
99.7
178
263
14500 13050
4.9
24.1 45.2 68.3 93.0
14.1
45.2 80.5
119
7000
6300
14.6
58.0
109
164
224
35.2
109
194
286
14000 12600
5.2
25.2 47.3 71.5 97.4
14.9
47.3 84.2
125
6500
5850
16.3
63.5
119
180
245
38.6
119
212
314
13500 12150
5.5
26.4 49.4 74.7
102
15.8
49.4 88.1
130
6000
5400
18.4
70.0
131
198
270
42.5
131
234
346
13000 11700
5.8
27.6 51.6 78.1
106
16.7
51.6 92.0
136
5500
4950
20.1
77.6
145
220
300
47.2
145
259
383
12500 11250
6.1
28.8 54.0 81.6
111
17.6
54.0 96.2
142
5000
4500
22.4
86.6
162
245
334
52.6
162
289
428
12000 10800
6.5
30.2 56.5 85.5
116
18.6
56.5
101
149
4500
4050
25.2
97.4
182
276
376
59.2
182
325
-
11500 10350
6.9
31.6 59.3 89.7
122
19.2
59.3
106
156
4000
3600
28.6
110
207
313
426
67.1
207
369
-
11000 9900
7.3
33.3 62.4 94.4
129
20.2
62.4
111
164
3500
3150
32.8
127
238
359
-
77.0
238
423
-
10500 9450
7.8
35.1 65.9 99.6
136
21.4
65.9
117
174
3000
2700
38.3
148
277
418
-
89.7
277
-
-
10000 9000
8.4
37.2 69.8
106
144
22.6
69.8
124
184
2500
2250
45.6
176
329
-
-
107
329
-
-
9500
8550
9.1
39.6 74.2
112
153
24.1
74.2
132
196
9000
8100
9.9
42.3 79.4
120
163
25.7
79.4
141
209
Note: Backup times are approximate and may vary with equipment, configuration, battery age,
temperature, etc.
8500
7650
10.8
45.5 85.2
129
175
27.6
85.2
152
225
8000
7200
11.9
49.1 91.9
139
189
29.8
91.9
164
242
VA
UPS
(1) (2) (3) (4)
UPS
(1)
(2)
(3)
+ Internal EBM EBM EBM EBM + Internal EBM EBM EBM
Watt 32 Battery 64
64
64
64 64 Battery 96
96
96
www.eaton.com/9155 1.800.356.5794
3
Options & service
Additional 9155 options
Wall-mount maintenance bypass panels
Eaton offers a comprehensive line of optional wall-mounted
maintenance bypass panels compatible with the 9155 UPS.
The wall-mounted bypass panel is used to bypass the UPS
during maintenance or servicing, providing wrap-around
bypass for UPS service without shutting down the load.
And for more flexible power distribution, these maintenance
bypass panels can be equipped with surge protection
and provisions for 36 poles of distribution utilizing Eaton's
Cutler-Hammer® breakers.
Extensive service options for
enhanced reliability
For support beyond the warranty period, Eaton offers
enhanced service options including onsite startup,
corrective and preventive maintenance, battery solutions,
training, remote monitoring and factory spare parts
and upgrades. Customizable three-phase UPS services
packages allow customers to select the plan that provides
the right combination of system uptime, convenience and
value.
Proven warranty and support services
Customers consistently rank Eaton services number one
in quality. Eaton’s comprehensive, world-class service
solutions are designed to improve costs, uptime, reliability,
power quality and safety. And with 240 customer service
engineers in North America and 1,200 international
authorized service providers, Eaton has more service
personnel than any other UPS manufacturer.
The standard factory warranty covers:
• System warranty: Two year parts / 90 days labor
• Battery warranty: Two years parts / 90 days labor
Service Plans
Features
Service Plans
Factory
Warranty
On-Site
Gold
On-Site Gold
Plus
Comprehensive coverage of the UPS and batteries
4
4
4
Telephone technical Support
4
4
4
Connectivity support
4
4
4
Expedited delivery of replacement parts, modules and batteries
4
4
On-site startup
4
4
On-site corrective maintenance
4
4
Next-day 24-hr response
4
4
UPS preventative maintenance
4
Battery preventative maintenance
4
4
EATON CORPORATION
9155 UPS
Connectivity & manageability
Enhanced communication capabilities
Power Xpert® Gateway Series cards
Power Xpert Gateway Series X-Slot cards provide
Web-enabled, real-time monitoring of UPSs, PDUs and
RPPs through standard onboard Web pages, Power Xpert
software or third-party software.
The 9155 UPS is equipped with a variety of standard
communications features for network connectivity and
remote management applications, including:
• RS-232 serial port
Power Xpert meters
Power Xpert meters combine state-of-the-art technology
with next-generation power diagnostics, data trending and
performance benchmarking with a twist-and-click LCD
display.
• Two X-Slot communication bays
®
• Relay output contacts
• Two programmable signal inputs
• Remote emergency power-off (REPO)
Centralized control and visibility
Easy network connectivity and monitoring
The 9155 UPS is shipped with the Eaton Software Suite
CD. The software suite includes the following applications,
as well as a user-friendly wizard to guide users through
software selection and installation:
ConnectUPS-X card
The ConnectUPS-X Web/SNMP X-Slot card connects the
9155 directly to an Ethernet network and the Internet and
enables graceful shutdown of multiple computers over the
network. The ConnectUPS-X Web/SNMP also features a
three-port switching hub.
Modbus® card
The Modbus card is an X-Slot device that allows
continuous, real-time monitoring of the 9155 through
a Building Management System (BMS) or industrial
automation system.
• Intelligent Power® Manager
• NetWatch network monitoring software
eNotify Remote Monitoring
Relay interface cards
The relay interface card for the X-Slot enables remote UPS
shutdown and provides isolated dry contact Form-C relay
outputs for utility failure, low battery, UPS alarm/OK, and
on bypass.
Environmental Monitoring Probe
The environmental monitoring probe (EMP) works with
the 9155 and ConnectUPS-X card to remotely monitor
ambient temperature and relative humidity of the remote
environment. The EMP can also be configured to provide
status of two additional contact devices such as smoke
detectors or open-door sensors.
ConnectUPS-X Web/
SNMP X-Slot card
• LanSafe® power management software
Eaton's eNotify Remote Monitoring Service provides 24x7
real-time monitoring of the 9155 and battery systems and
alerts both service technicians and the customer when
a problem is detected. Proactive monitoring enables
technical experts to respond immediately to more than
40 alarm conditions and, in many cases, resolve issues
remotely with minimal or no downtime. Additional eNotify
benefits include:
• One-way outbound status and event e-mails for security
and reliability
• Fast diagnosis and notification of critical alarms
• Monthly customer reports including power event logs
and overall UPS and battery health summaries
Power Xpert Gateway
Card 2000
Monitoring Probe
Modbus card
LanSafe®
Relay Interface cards
Foreseer
www.eaton.com/9155 1.800.356.5794
5
Eaton 9155 at-a-glance
Model Selection Table - Eaton 9155 UPS (8–15 kVA)
Order Number1
Description
Power Rating2
(kVA/kW)
Input & Output
Dimensions
Connection4
Output Receptacles H x W x D5 (in)
Unit
Weight3 (lb)
K40811000000000
PW9155 Model 8 - 32 Battery (2-high)
8/7.2
Hardwired
See PDM chart
32.2 x 12.0 x 32.0
352
K40812000000000
PW9155 Model 8 - 64 Battery (3-high)
8/7.2
Hardwired
See PDM chart
47.8 x 12.0 x 32.0
590
K40813000000000
PW9155 Model 8 - 32 Battery with Transformer (3-high)
8/7.2
Hardwired
See PDM chart
47.8 x 12.0 x 32.0
558
K41011000000000
PW9155 Model 10 - 32 Battery (2- high)
10/9
Hardwired
See PDM chart
32.2 x 12.0 x 32.0
352
K41012000000000
PW9155 Model 10 - 64 Battery (3- high)
10/9
Hardwired
See PDM chart
47.8 x 12.0 x 32.0
590
K41013000000000
PW9155 Model 10 - 32 Battery with Transformer (3-high)
10/9
Hardwired
See PDM chart
47.8 x 12.0 x 32.0
558
K41211000000000
PW9155 Model 12 - 32 Battery (2-high)
12/10.8
Hardwired
See PDM chart
32.2 x 12.0 x 32.0
352
K41212000000000
PW9155 Model 12 - 64 Battery (3-high)
12/10.8
Hardwired
See PDM chart
47.8 x 12.0 x 32.0
590
K41213000000000
PW9155 Model 12 - 32 Battery with Transformer (3-high)
12/10.8
Hardwired
See PDM chart
47.8 x 12.0 x 32.0
558
K41511000000000
PW9155 Model 15 - 32 Battery (2- high)
15/13.5
Hardwired
See PDM chart
32.2 x 12.0 x 32.0
352
K41512000000000
PW9155 Model 15 - 64 Battery (3- high)
15/13.5
Hardwired
See PDM chart
47.8 x 12.0 x 32.0
590
K41513000000000
PW9155 Model 15 - 32 Battery with Transformer. (3- high)
15/13.5
Hardwired
See PDM chart
47.8 x 12.0 x 32.0
558
1. 50/60 Hz auto-sensing. All models can be used for frequency/phase conversion with de-rated 80% load. Please refer to manual for details.
2.Input voltage 200–240V with neutral or with optional input isolation transformer. Output voltages are user-selectable 100/200, 110/220,
120/240 Vac 180° phase displacement, or 120/208, 127/220 Vac 120° phase displacement.
3. Weight is installed weight; add 47 lbs (2-high models) or 50 lbs (3-high models) to determine shipping weight.
4. An input neutral is required for all configurations unless the input isolation transformer is used.
5. Depth increases to 33.7" when unit is configured with a PDM.
Four button graphical
LCD with backlight
Front view of 3-high module
with cover off
X-Slot Communication Bay #1
Fans
Signal Input 1
REPO (normally open)
Signal Input 2
REPO (normally closed)
X-Slot Communication Bay #2
DB-9 Communication Port
Relay Contact
Internal batteries on slide
out trays (field-replaceable)
6
EATON CORPORATION
9155 UPS
Eaton 9155 Accessories
Accessories
Description
Dimensions
H x W x D (in)
Unit Weight
(lb)
124100017-001
9155 Parallel Cabinet
24.0 x 20.3 x 2.2
57.3
103004336
Powerware HotSync CAN Bridge Card
-
-
Order Number
Powerware Hot Sync
Notes: Up to three 9155 UPS and up to four 9355 UPS (available Fall 2005) UPSs can be paralleled with the Parallel Cabinet.
Extended Battery Module (EBM) or Cabinets (EBC)
103004192-5501
9155 and 9355 EBM 64 (2-high)
32.2 x 12.0 x 30.2
480
103004193-5501
9155 and 9355 EBM 96 (3-high)
47.8 x 12.0 x 30.2
710
Fits both
2- & 3-high models
136
21 x 14 x 6.75
31
Notes: up to four EBM 64 cabinets or three EBM 96 cabinets can be added to each 8-15 kVA UPS for extended runtime.
Seismic Mounting Kit
103004194-5501
Seismic Kit, Rated Zone 4, UL Tested, Performance rating based on NEBS GR-63-CORE Standard Vibration Test
Maintenance Bypass Module (MBM)
BPE20MBB1A
Wall-mounted Maintenance Bypass Module for 9155
Eaton 9155 Parallel System Start Up
OSTUP9155P10CX
9155 8-10 kVA 2 or 3 Unit Parallel
OSTUP9155P15CX
9155 12-15 kVA 2 or 3 Unit Parallel
103004626
9155 Parallel System 2 unit upgrade kit (includes Can Bridge Cards, Procedures, and Parallel User's Guide)
103004627
9155 Parallel System 3 unit upgrade kit (includes Can Bridge Cards, Procedures, and Parallel User's Guide)
Connectivity Options
116750221-001
ConnectUPS-X Web/SNMP/xHub Card
05146288-5501
ConnectUPS-MX SNMP/Modem Card (9155 only)
1035425-5591
Modbus Card
1018460
Relay Interface Card (AS/400 Compatible)
103003055
Industrial Relay Card
116750224-001
Environmental Probe (requires ConnectUPS Web/SNMP card)
Spare Parts
106711155
9155 Spare Parts Kit "A"
Upgrades
103004195
9155 8 kVA to 9155 10 kVA
103004196
9155 12 kVA to 9155 15 kVA
Power Distribution Module (PDM) with Mechanical Bypass Switch
Optional Receptacle Panels
Breaker
Voltage
Phase
(4) 5-15R
15A
120V
1
(4) 5-20R UL
20A
120V
1
(4) 6-15R
15A
208V
2
(4) 6-20R
20A
208V
2
(4) L5-15R
15A
120V
1
(2) L5-20R*
20A
120V
1
(2) L5-30R*
30A
120V
1
(2) L6-15R
15A
208V
2
(2) L6-20R*
20A
208V
2
(2) L6-30R*
30A
208V
2
(2) L14-20R*
20A
120/208V
2
(2) L14-30R*
30A
120/208V
2
Blank panel
* The combined quantity of these locking receptacle plates must not exceed four.
www.eaton.com/9155 1.800.356.5794
7
TECHNICAL SPECIFICATIONS for 10 AND 15 kVA
Environmental
Power
Ratings (kVA/Watts)
8, 10, 12 and 15 kVA at 0.9 power factor
Topology
True double-conversion online UPS
Electrical Input
Nominal Input Voltage
200V-240V with neutral or with optional input transformer
Input Voltage Range
-15%, +10% from nominal at 100% load without
depleting battery
Operating Temperature
10ºC to +40ºC, +45ºC with 7.5% derating;
Batteries recommended max. +25ºC
Storage Temperature
-15ºC to +25ºC
Relative Humidity
0–95%, non-condensing
Audible Noise
< 53 dBA at 1 meter (noise less room) typical
Altitude
< 1000m at +40°C, < 3000m at +25°C
Operating Frequency
50/60 Hz (45 to 65 Hz)
Certifications
Input Power Factor
P.F >0.99 typical, >0.96 frequency converter
Safety Certifications
Input Current Distortion
5% THD
NOM-0190SCFI-1993, UL 1778, CSA C22.2, No. 107.3;
EN 5502 Class A (CISPR22 Class A) and IEC 60950;
IEC 62040-1-1
EMC Compliance
IEC 62040-2, FCC Part 15, ICES-003, VCCI
Quality
ISO 9001: 2000 and ISO 14001:1996
Markings
UL, cUL, CSA, CE and NOM-NYCE
Electrical Output
Nominal Output Voltage
100/200, 110/220, 120/240 Vac 180° phase displacement;
120/208, 127/220 Vac 120° phase displacement
Output Voltage
Regulation
±1% Static; ±5% dynamic at 100% resistive load change,
<1 ms response time
Efficiency
90% typical
1. Due to continuous product improvements, program specifications are subject to change without notice.
Battery
Battery Type
9Ah, sealed, lead-acid, maintenance-free
Battery Runtime
See Battery Runtime Chart
Battery Replacement
Field-replaceable
Charger
Default is 3.4A per battery string. Charger current is
configurable from 0.5A to 25A per string with an overall
maximum of 34A (limited by input current)
Start-On-Battery
Allows start of UPS without utility input
General
Diagnostics
Full system self-test at startup
UPS Bypass
Automatic on overload or UPS failure
Parallel for Redundancy
and Capacity
Yes, using Powerware Hot Sync technology
Dimensions and Weights See Model Selection Table
Overload
150% for 5 sec / 125% for 1 min (online), (Normal Operation)
110% for 10 min
Communications
LCD Display
Graphical LCD with blue backlight
LEDs
(4) LEDs for notice and alarm
Audible Alarms
Yes
Communication Ports
(1) RS-232, (1) relay contact, (1) REPO, (2) environmental input
Communication Slot
(2) X-Slot communication bays
Power Management
Bundled Software Suite CD Software
UNITED STATES
8609 Six Forks Road
Raleigh, NC 27615 U.S.A.
Toll Free: 1.800.356.5794
www.eaton.com/powerquality
CANADA
Ontario: 416.798.0112
Toll free: 1.800.461.9166
LATIN AMERICA
South Cone: 54.11.4124.4000
Brazil: 55.11.3616.8500
Andean & Caribbean:
1.949.452.9610
Mexico & Central America:
52.55.9000.5252
EUROPE/MIDDLE EAST/AFRICA
Denmark: 45.3686.7910
Finland: 358.94.52.661
France: 33.1.6012.7400
Germany: 49.0.7841.604.0
Italy: 39.02.66.04.05.40
Norway: 47.23.03.65.50
Portugal: 55.11.3616.8500
Sweden: 46.8.598.940.00
United Kingdom: 44.1753.608.700
ASIA PACIFIC
Australia: 61.2.9693.9366
New Zealand: 64.0.3.343.3314
China: 86.21.6361.5599
HK/Korea/Taiwan: 852.2745.6682
India: 91.11.4223.2300
Singapore/SEA: 65.6825.1668
Eaton, PowerChain Management, ABM,
ConnectUPS, LanSafe, PowerVision,
Powerware Hot Sync, and X-Slot are trade
names, trademarks and/or service marks
of Eaton Corporation or its subsidiaries and
affiliates. All other trademarks are property
of their respective owners.
©2010 Eaton Corporation
All Rights Reserved
Printed in USA
9155FXA
October 2010
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising