Ideal_Domestic Gas Boilers_Brochure

Ideal_Domestic Gas Boilers_Brochure
High Efficiency
Domestic Gas Boilers
Heating Solutions
www.idealheating.com
Ideal Heating Solutions
Pioneering heating
solutions since 1905
When you choose to work with Ideal you
As technologies continue to develop,
that our products are not only reliable, but
we understand that you want a long term
have also been designed and built with you
partner who has the skills and expertise to
in mind.
can be confident to know that our rigorous
research and development procedures ensure
deliver you a wide range of practical and
reliable hot water and heating solutions,
From dedicated one-to-one support
that are simple to install and easy to service.
throughout the design, planning and after
sales service stages, you can be confident to
Here at Ideal, we can provide you with
just that.
know that we can provide you with the Ideal
heating and hot water solution.
Contents
High Efficiency Boilers
4-5
Logic+ Combi
6-7
Logic Combi
8-9
Logic+ and Logic Combi
10-13
Logic Code Combi
14-15
Logic+ Heat Only
16-17
Logic Heat Only
18-19
Logic+ and Logic Heat Only
20-21
Logic+ System
22-23
Logic+ and Logic System
24-27
Logic+ and Logic Controls
28-31
Mexico HE Heat Only
Accessories
32
Boiler Accessories
Flueing
33
Flue Siting
34-38
Logic+ and Logic
39-42
Logic Code Combi
43-45
Mexico HE
Ideal Service & Support
46-51
Technical Specification
52-55
Ideal Service & Support
03
Logic+ Combi
24 30 35
5
The Logic+ Combi
The Logic+ is the advanced range of high SEDBUK efficiency rated
combination boilers from Ideal, featuring a compact size and a 5
year parts and labour warranty as standard. Fully modulating down
to as low as 4.8 kW, the Logic+ provides excellent energy savings,
making it the perfect choice for new or replacement installations.
Available in outputs of 24, 30 and 35 kW, the Logic+ is
designed to ensure a quick and hassle free installation thanks
to concealed connections, built-in automatic bypass and an
integral filling loop. A translucent condensate siphon also
allows any debris to be spotted quickly and efficiently.
Siting the product is quick and simple too thanks to a
telescopic flue, push & clip flue turret connections and zero
compartment ventilation which allows the product to be
installed neatly into a standard kitchen cupboard.
A clear 16 character backlit display provides a plain
English description of the heating and hot
water functions, together with fault information.
A history log provides further reassurance.
Complete with a 5 year parts and labour warranty
and recommended by the Energy Saving trust, the
Logic+ delivers total home comfort and customer
peace of mind.
5 year warranty only valid if registered within 30 days of installation.
Terms and conditions apply, please visit www.idealheating.com for
full details.
04
Y
e
a
Warran r
ty
Heating Solutions
NOx
Class 5
Flue
Variants
Frost
Protection
Cupboard Fit
Compact
5
Year
Warranty
Made in
the UK
Features and Benefits
s %NERGY3AVING4RUSTRECOMMENDED
s YEARPARTSANDLABOURWARRANTY
s #OMPACTCUPBOARDlT
s $OORTOOPTIONALTIMERINCLUDESUSERSINSTRUCTIONS
s 0REHEATFUNCTION
s &ASTlXTELESCOPICHORIZONTALmUE
s 7IDERANGEOFADDITIONALmUEINGOPTIONS
s ,OWLIFTWEIGHTKG
s 0REFORMEDCOPPERTAILS
s 0REWIREDMAINSLEADMSPAREFUSESINCLUDED
s "UILTINFROSTPROTECTION
s "UILTINlLLINGLOOP
s 026WALLOUTLETPIPEINCLUDED
s MMDEEPTRANSLUCENTCONDENSATESIPHON
s 5NIVERSALCONDENSATECONNECTION
s !UTOMATICBYPASS
s 3TANDOFFKITINCLUDINGPIPES
s 0REPIPINGKIT
s 0LAINTEXTOPERATIONDIAGNOSTICSDISPLAY
s &ULLYMODULATINGOPERATIONTOLOWOUTPUTS
s Compatible with a range of additional controls inc.
weather compensation and Opentherm controls.
Logic+ Combi
05
Logic Combi
24 30 35
The Logic Combi
Available in the choice of three outputs of 24, 30 and
35 kW, the Logic combi range from Ideal provides a
quick and hassle free installation, supported by a 2
year parts and labour warranty as standard.
High SEDBUK efficiency rating and fully
modulating, the Logic range of combis feature
concealed connections and a built-in automatic
bypass, whilst a translucent condensate siphon
ensures any debris is spotted quickly
and efficiently.
Designed to be installed with the minimum
of fuss, Logic appliances offer a speedy
installation with push & clip flue turret
connections and no need for compartment
ventilation; the Ideal Logic can be installed
out of sight into a standard kitchen
cupboard.
Featuring a simple diagnostics display,
the Logic range is compatible with a
range of optional timers and is the
perfect choice for the replacement or
new installation.
2 year warranty only valid if registered within
30 days of installation.
Terms and conditions apply, please visit www.
idealheating.com for full details.
06
2
Y
e
a
Warran r
ty
Heating Solutions
NOx
Class 5
Flue
Variants
Frost
Protection
Display
Digital
Cupboard Fit
Compact
2
Year
Warranty
Made in
the UK
Features and Benefits
s %NERGY3AVING4RUSTRECOMMENDED
s YEARPARTSANDLABOURWARRANTY
s #OMPACTCUPBOARDlT
s 0REHEATFUNCTION
s &ASTlXSTANDARDHORIZONTALmUE
s 7IDERANGEOFADDITIONALmUEINGOPTIONS
s ,OWLIFTWEIGHTKG
s 0REFORMEDCOPPERTAILS
s 0REWIREDMAINSLEADM
s "UILTINFROSTPROTECTION
s "UILTINlLLINGLOOP
s MMDEEPTRANSLUCENTCONDENSATESIPHON
s 5NIVERSALCONDENSATECONNECTION
s !UTOMATICBYPASS
s 3TANDOFFKITINCLUDINGPIPES
s 0REPIPINGKIT
s &ULLYMODULATINGOPERATIONTOLOWOUTPUTS
s Compatible with a range of additional controls inc.
weather compensation
Logic Combi
Heating Solutions
Logic+ and Logic
Combi
24 30 35
Flue Lengths
Logic+ and Logic Combi
Boiler Model
Flues
08
24
Max horizontal *
9m
30
35
8m
6m
Max vertical *
M
0OWERED6ERTICAL†
22m
* Each 90° elbow used is at the expense
of 1000mm of straight flue run, and
each 45° elbow is used at the expense of
600mm of straight flue run.
† Typical combined primary and secondary
length. See installation instructions for
more details.
Note: The Flue Deflector Kit is used at the
expense of 1000mm of straight flue run.
Boiler Clearances and Dimensions
2.5
from case
2.5
395
278
165
Flue
terminal
700
100*
Note: The minimum front clearance when built-in to a cupboard is 5mm from the
cupboard door but 450mm overall clearance with the cupboard door open is required
for servicing. *Bottom clearance after installation can be reduced to 5mm.
However, 100mm is required for servicing.
400
43
65
57
38
CH Flow
DHW Outlet
Gas Inlet
Condensate Drain
39
65
DHW Inlet
CH Return
Logic+ and Logic Combi
Logic Code Combi
26 33 38
2
The Logic Code Combi
$ESIGNEDTOTAKETHEHEADACHEOUTOFMEETING"UILDING2EGULATIONSTHE
Logic Code Combi from Ideal is a simple one-box solution, capable of
supporting up to level 4 of the Code for Sustainable homes.
Available in a choice of DHW outputs, 26 - 38 kW, the Logic Code Combi,
provides a perfect solution for both new build and retro fit solutions where
energy efficiency is a key concern.
Developed using state-of-the-art advanced boiler technology, the Code
Combi features a built-in stainless-steel recuperator located in the flue
exit, which cleverly picks ups and recycles waste energy that would
have normally been lost through the flue terminal.
This energy is collected and used to warm up the cold hot water
supply. This supply, then flows into the plate heat exchanger, where
the desired temperature is reached.
The Logic Code Combi comes complete with a 2 year parts and
labour warranty, a NOx class 5 rating and a dedicated in-house
design* and service network for developers and installers for the
ultimate in peace of mind.
When used with controls and weather compensation, the
Logic Code Combi provides the perfect no-nonsense solution
for a range of domestic properties.
*A charge may apply for this service.
02
10
Y
e
a
Warran r
ty
Heating Solutions
How does the Logic Code Combi work?
FLUE TERMINAL 30°C
Operation with recuperator in flue
s (OTWATERTAPISOPENEDANDBOILER
AIR INLET 20°C
senses flow
s "URNERON
s #OMBUSTIONGASESHEATPRIMARY
water heat exchanger and flue gases
RECUPERATOR IN FLUE
exit to the flue
s #OLDWATERFROMMAINSmOWS through the recuperator in
65°C
the flue
s %NERGYFROMTHEmUEGASESIS transferred to the in coming water
s 4HECOOLEDmUEGASESEXITTHE
HEAT EXCHANGER
boiler
s 0REHEATEDWATERENTERSTHEBOILER
and is further heated by the
secondary heat exchanger
SECONDARY
HEAT EXCHANGER
s (OTWATERISPRODUCEDATTHETAP
Schematic view
03
11
Logic Code Combi
Optional timer kit
Heating Solutions
Logic Code Combi
26 33 38
NOx
Class 5
Flue
Variants
Frost
Protection
Cupboard Fit
Compact
2
Year
Warranty
Made in
the UK
Features and Benefits
s 4HREEMODELSAVAILABLEK7
s /NESINGLEAPPLIANCETOINSTALLnQUICKANDEASY
s "UILTINPIPEWORKNOEXTRASPACEATTHESIDEOFTHE
product needed
s -INIMUMOVERALLHEIGHTINCREASEGIVESEASIER site installation
s .EATANDTIDYAPPEARANCE
s #OMPACTANDLIGHTSOLUTIONFORNEWBUILDOR
retrofit installations
s (IGH$(7EFlCIENCYREDUCEDRUNNINGCOSTS
s (IGHER$(7mOWRATESTHANSTANDARDBOILER
nAPPROXIMATELYINCREASE
s ,ESSWASTE$(7WATERAS$(7INLETISPREHEATED
s 2EDUCEDPLUMINGON$(7
s YEARPARTSANDLABOURWARRANTY
04
12
Boiler Clearances and Dimensions
2.5
from case
2.5
395
278
165
Flue
terminal
830
100*
Note: The minimum front clearance when built-in to a cupboard is 5mm from the
cupboard door but 450mm overall clearance with the cupboard door open is required
for servicing. *Bottom clearance after installation can be reduced to 5mm.
However, 100mm is required for servicing.
400
Flue Lengths
Logic Code Combi
Boiler Model
Flues
26
Max horizontal *
Max vertical *
9
33
38
8
6
0OWERED6ERTICAL†
22
High Level Flue Outlet Kit
Yes
$IRECT2EAR&LUE+IT
No
* Each 90° elbow used is at the expense of 1000mm of straight flue
run, and each 45° elbow is used at the expense of 600mm of straight
flue length.
Note: The Flue Deflector Kit is used at the expense of 1000mm of
straight flue length.
05
Logic Code Combi
† Typical combined primary and secondary length. See installation
instructions for more details.
Logic+ Heat Only
12 15 18 24 30
5
The Logic+ Heat Only
The Logic+ Heat range of boilers from Ideal provides an easy
to install, dependable heat only solution for both new build or
replacement installations alike, fully supported by a 5 year parts
and labour warranty.
Available in the choice of five outputs - 12, 15, 18, 24 &
30kW, the Logic+ Heat delivers total home comfort for a wide
variety of domestic properties. High SEDBUK efficiency rated
and capable of modulating down to 4.8kW*, the Logic+
Heat is highly efficient and easy to operate thanks to simple
controls featuring a clear digital display.
Suitable for open vent and sealed system installations,
the Logic+ Heat boiler is straightforward to site. Installers
have the further choice of a neat direct rear flue option,
helping to speed up the installation time in retro fit
situations even further.
With a compact cupboard fit, no compartment
ventilation and lightweight design, the Logic+ Heat
boiler can be conveniently installed into a standard
kitchen cupboard*2.
ONLYK7
*20LEASECHECKKITCHENCUPBOARDSIZEPRIORTOINSTALLATION
5 year warranty only valid if registered within 30 days of installation.
Terms and conditions apply, please visit www.idealheating.com for
full details.
14
Y
e
a
Warran r
ty
Heating Solutions
NOx
Class 5
Direct Rear
Flue
Flue
Variants
Frost
Protection
Display
Digital
Cupboard Fit
Compact
5
Year
Warranty
Made in
the UK
Features and Benefits
s %NERGY3AVING4RUSTRECOMMENDED
s YEARPARTSANDLABOURWARRANTY
s #OMPACTCUPBOARDlT
s $IRECTMMDIAMETERREARmUEOPTION
s 7IDERANGEOFmUEINGOPTIONS
s ,OWLIFTWEIGHTKG
s 4OPSYSTEMCONNECTIONS
s MMDEEPTRANSLUCENTCONDENSATESIPHON
s 3TANDOFFKIT
s 4ERMINALWALLPLATEKIT
s 3ECURITYBRACKETKIT
s &ULLYMODULATINGOPERATIONDOWNTOK7
2
s 7EATHERCOMPENSATIONKITOPTION
s "OILERFROSTPROTECTION
s ,OWMINIMUMHEADREQUIREMENT
s 7ATERmOWSENSOR
** Weight with front panel removed
**2ONLYK7
Logic+ Heat Only
15
Logic Heat Only
12 15 18 24 30
2
The Logic Heat Only
Incorporating the latest in heating design and technology, the
Logic Heat is an outstanding heat only solution for both new build
or replacement installations alike. Available in the choice of five
outputs - 12, 15, 18, 24 & 30kW, the Logic Heat will deliver
total home comfort for a wide range of domestic properties.
Suitable for open vent and sealed systems, the Logic heat
boiler is straightforward to site and install. Benefiting from
no compartment ventilation, compact fit, and a lightweight
design means the boiler can be neatly installed out of sight
into a kitchen cupboard*. Installers have the further
choice of a neat direct rear flue option as required,
helping to speed up the installation in retro fit
situations even further.
High SEDBUK efficiency rated and capability of
modulating down to 4.8kW*2, the Logic heat is highly
efficient and easy to operate thanks to straightforward
controls featuring a clear digital display.
Supported by a 2 year parts and labour warranty,
the Logic heat is a reliable and efficient heat only
solution for domestic installations.
0LEASECHECKKITCHENCUPBOARDSIZEPRIORTOINSTALLATION
*2ONLYK7
2 year warranty only valid if registered within 30 days of installation.
Terms and conditions apply, please visit www.idealheating.com for
full details.
16
Y
e
a
Warran r
ty
Heating Solutions
NOx
Class 5
Direct Rear
Flue
Flue
Variants
Frost
Protection
Display
Digital
Cupboard Fit
Compact
2
Year
Warranty
Made in
the UK
Features and Benefits
s %NERGY3AVING4RUSTRECOMMENDED
s YEARPARTSANDLABOURWARRANTY
s #OMPACTCUPBOARDlT
s $IRECTMMDIAMETERREARmUEOPTION
s 7IDERANGEOFmUEINGOPTIONS
s ,OWLIFTWEIGHTKG
s 4OPSYSTEMCONNECTIONS
s MMDEEPTRANSLUCENTCONDENSATESIPHON
s 3TANDOFFKIT
s 4ERMINALWALLPLATEKIT
s 3ECURITYBRACKETKIT
s &ULLYMODULATINGOPERATIONDOWNTOK7
2
s 7EATHERCOMPENSATIONKITOPTION
s "OILERFROSTPROTECTION
s ,OWMINIMUMHEADREQUIREMENT
s 7ATERmOWSENSOR
** Weight with front panel removed
**2ONLYK7
Logic Heat Only
Heating Solutions
Logic+ and Logic
Heating Only
12 15 18 24 30
Rear Outlet Flue Terminal (55/80) - 80mm
Note:
Maximum wall thickness 442mm.
Minimum wall thickness permissible is 115mm.
No extensions are permitted.
Flue Lengths
Logic+ and Logic Heat Only
Boiler Model
Flues
12
Max horizontal
Max vertical
0OWERED6ERTICAL
18
15
18
9m
24
30
8m
M
22m
Also available:
High Level Flue
/UTLET+IT$IRECT
2EAR&LUE+IT
Boiler Clearances and Dimensions
2.5
from case
2.5
278
395
278
165**
Flue
terminal
Direct
rear
flue
terminal
700
100*
400
Note: The minimum front clearance when built-in to a cupboard is 5mm from the
cupboard door but 450mm overall clearance with the cupboard door open is required
for servicing. *Bottom clearance after installation can be reduced to 5mm.
(OWEVERMMISREQUIREDFORSERVICING
2EARmUEOPTIONTOPCLEARANCEMM
Logic+ and Logic Heat Only
Logic+ System
15 18 24 30
5
The Logic+ System
The Logic+ System range of appliances from Ideal provide a reliable
sealed system solution, complete with a 5 year parts and labour
warranty for the ultimate in home comfort and total piece of mind.
High SEDBUK efficiency rating and available in a choice of four
outputs - 15, 18, 24 and 30kW, the Logic+ system is suitable
for a wide variety of sealed domestic systems and features a
lightweight compact cupboard fit design*. Concealed connections
at the base and no compartment ventilation required means the
Logic+ System can be conveniently located out of sight in new or
replacement installations.
0RODUCTDESIGNANDQUALITYISPARAMOUNTWITHINTHE,OGIC
system range; additional features such as plated internal pipe
WORKSPAREFUSESANDA026WALLOUTLETPIPEALLENSURETOTAL
reliability and a hassle free installation.
Siting and installing a Logic+ System is straightforward
when a simple telescopic flue is used, complete with push
& clip flue turret connections. Alternative fluing options
are also available as required.
With additional extended warranty options available, the
Logic+ System provides simple, reliable heating control
from a single compact appliance.
0LEASECHECKKITCHENCUPBOARDSIZEPRIORTOINSTALLATION
5 year warranty only valid if registered within 30 days of installation.
Terms and conditions apply, please visit www.idealheating.com for
full details.
20
Y
e
a
Warran r
ty
Heating Solutions
NOx
Class 5
Flue
Variants
Frost
Protection
Display
Digital
Cupboard Fit
Compact
5
Year
Warranty
Made in
the UK
Features and Benefits
s %NERGY3AVING4RUSTRECOMMENDED
s YEARPARTSANDLABOURWARRANTY
s #OMPACT#UPBOARDlT
s 7IDERANGEOFmUEINGOPTIONS
s #ONCEALEDPIPECONNECTIONS
s ,OWLIFTWEIGHTKG
s "OILERFROSTPROTECTION
s "UILTINCONDENSATETRAP
s 0REWIREDMAINSLEAD
s 0REFORMEDCOPPERTAILS
s $IGITALDISPLAYANDSIMPLEDIAGNOSTICS
s 3TANDOFFKITANDPREPIPEOPTIONS
s &ULLYMODULATINGOPERATIONDOWNTOK7
s 0267ALL/UTLET0IPE
s 7EATHERCOMPENSATIONKITOPTION
** Weight with front panel removed
Logic+ System
21
Logic System
15 18 24 30
The Logic System
High SEDBUK efficiency rating and easy to install, the Logic
System range of appliances from Ideal provide a simple and
reliable solution for a wide variety of sealed domestic systems.
Available in a choice of four outputs - 15, 18, 24 and 30kW,
the Logic System provides a dependable and efficient solution
for new and replacement installations alike. Siting and
installing a Logic System is hassle free thanks to a simple
telescopic flue option. Time saving push & clip flue turret
connections and a wide range of alternative fluing solutions
help to ensure the product is installed quickly and
efficiency in virtually any domestic situation.
With a lightweight design, concealed connections at the
base and no compartment ventilation required, the Logic
System can be conveniently fitted out of sight into a
standard kitchen cupboard*.
Complete with a 2 year parts and labour warranty and
with additional extended warranty options available,
the Logic System boiler provides simple heating
control, all from a single compact appliance.
*please check kitchen cupboard size prior to installation.
2 year warranty only valid if registered within 30 days of installation.
Terms and conditions apply, please visit www.idealheating.com for
full details.
22
2
Y
e
a
Warran r
ty
Heating Solutions
NOx
Class 5
Flue
Variants
Frost
Protection
Display
Digital
Cupboard Fit
Compact
2
Year
Warranty
Made in
the UK
Features and Benefits
s %NERGY3AVING4RUSTRECOMMENDED
s YEARPARTSANDLABOURWARRANTY
s #OMPACT#UPBOARDlT
s 7IDERANGEOFmUEINGOPTIONS
s #ONCEALEDPIPECONNECTIONS
s ,OWLIFTWEIGHTKG
s "OILERFROSTPROTECTION
s "UILTINCONDENSATETRAP
s 0REWIREDMAINSLEAD
s 0REFORMEDCOPPERTAILS
s $IGITALDISPLAYANDSIMPLEDIAGNOSTICS
s 3TANDOFFKITANDPREPIPEOPTIONS
s &ULLYMODULATINGOPERATIONDOWNTOK7
s 7EATHERCOMPENSATIONKITOPTION
**Weight with front panel removed
Logic System
23
Heating Solutions
Logic+ and Logic
System
15 18 24 30
Flue Lengths
Logic+ and Logic System
Boiler Model
Flues
15
Max horizontal
Max vertical
0OWERED6ERTICAL
24
18
24
9m
30
8m
M
22m
Also available:
High Level Flue
Outlet Kit
Boiler Clearances and Dimensions
2.5
from case
2.5
395
278
165
Flue
terminal
700
100*
400
Note: The minimum front clearance when built-in to a cupboard is 5mm from the
cupboard door but 450mm overall clearance with the cupboard door open is required
for servicing. *Bottom clearance after installation can be reduced to 5mm.
However, 100mm is required for servicing.
Logic+ and Logic System
Heating Solutions
Logic+, Logic and Logic Code Combi Controls
(Combi Only)
Programmable Thermostats and Timers
Here at Ideal we believe that choosing the right control to meet the needs of your customer is almost as
important as choosing the right product; this is why the Logic+, Logic and Logic Code combi ranges are fully
compatible with a range of thermostats and timers for the ultimate in home comfort.
Mechanical Timer
0ART.O
Simple heating and hot water control through
a plug in analogue timer.
Electronic Timer
0ART.O
Easy to use heating and hot water control
THROUGHAPLUGINDIGITALTIMER0LAINTEXT
operating and diagnostics information.
External room controls:
RF Mechanical Programmable Thermostat
0ART.O
7IRELESS2ADIO&REQUENCY2&ANALOGUETIMER
providing heating and hot water control.
26
RF Electronic Programmable Thermostat
0ART.O
7IRELESS2ADIO&REQUENCY2&DIGITALTIMER
PROVIDINGHEATINGANDHOTWATERCONTROL0LAINTEXT
operating and diagnostics information.
Logic+, Logic and Logic Code Combi Controls
(Combi, Heat and System)
Weather compensation
Outdoor sensor
0ART.O#OMBIMODELSONLY
0ART.O(EATAND3YSTEMMODELS
The Logic+, Logic and Logic Code combi ranges provide
weather compensation when fitted with an outdoor sensor
WHICHISAVAILABLEASANOPTIONALACCESSORY
Weather compensation works by measuring the
temperature outside the home and adjusting the
TEMPERATUREORmOWOFTHERADIATORSINSIDE)FTHE
will communicate with the boiler intelligently to increase
This process allows the system to operate more
the radiator temperature. This process also works in
efficiently by only heating to the minimum
reverse, as the outdoor temperature increases, the flow
temperature necessary and also preventing
to the radiators too will decrease.
spikes in heating activity.
Logic+ and Logic Controls
weather is particularly cold outside, the outdoor sensor
Heating Solutions
Mexico HE
Heat Only
15 18 24 30 36
The Mexico HE
High SEDBUK efficiency rated and floor standing,
the Mexico range of heat only boilers from Ideal
are the perfect solution for the replacement
installation.
Ideal for situations when an old standard
efficiency boiler is being taken out, the Mexico
offers a quick and hassle free installation and
benefits from a pre-piping frame which allows all
connections to be made before the boiler is slid
into place. No compartment ventilation means
the boiler can be installed under worktops and
behind cupboard doors, while a range of flue
options, both horizontal and vertical, provide
advanced siting flexibility.
2ECOMMENDEDBYTHE%NERGY3AVING4RUST
the Mexico is available in the choice of five
outputs and comes complete with an easy
to use control panel featuring a status and
diagnostics display.
Complete with a one year parts and labour
warranty and with additional extended
warranty options available, the Ideal Mexico
provides straightforward heating control
from a single floor standing appliance.
28
NOx
Class 5
Flue
Variants
Frost
Protection
Display
Digital
Floor Standing
Compact
1
Year
Warranty
Made in
the UK
Features and Benefits
s %NERGY3AVING4RUSTRECOMMENDED
s #OMPACTmOORSTANDING
s 0REPIPINGFRAME
s 0ERFECTFORREPLACEMENTINSTALLATIONS
s .OVENTILATIONREQUIRED
s !VAILABLEWITHAWIDERANGEOFmUEINGOPTIONS
s !LPHANUMERICOPERATIONDISPLAY
s 2EADILYVISIBLECONTROLPANEL
s 3TATUSANDDIAGNOSTICDISPLAY
s /PTIONALCONVENIENTUSERCONTROLS
s YEARPARTSANDLABOURWARRANTY
s %XTENDEDWARRANTYOPTIONSAVAILABLE
s /PTIONALCONDENSATEPUMPAVAILABLE
Mexico HE Heat Only
29
Heating Solutions
Mexico HE
Heat Only
15 18 24 30 36
Flue Lengths
Mexico HE
15
Boiler Model
Flues
30
Max horizontal
18
24
30
36
6m
3m
Max vertical
M
5m
0OWERED6ERTICAL
22m
.!
Note: Each 90° elbow used is at the
expense of 1500mm of straight flue
run, and each 45° elbow is used at the
expense of 1000mm of straight run.
The flue Deflector kit is used at the
expense of 1000mm of straight flue run.
Boiler Clearances and Dimensions
Flue pluming is a by-product of
EFlCIENCY0LEASEBEAWAREOFTERMINAL
positions to avoid complaints.
For full technical details please refer to the
Installation and Servicing Instructions provided
with the product.
The flue duct must be inclined at a minimum of 1.5 degrees to
the horizontal to allow the condensate to be properly drained if
using flue extensions.
Note: Lengths are measured from the flue elbow centre line.
This position is as follows:
2EAR/UTLETMMFROMREARJACKETTOmUECENTRELINE
Side Outlet: 225mm from boiler side panel to flue centre line.
Mexico HE Heat Only
Heating Solutions
Boiler Accessories
Condensate Pump
4HE)DEAL#ONDENSATE0UMPOFFERSAQUICKANDEASYSOLUTIONTO
overcome many siting problems.
Designed to remove the condensate from condensing boilers
and out into a suitable waste system, the pump is a simple
and effective solution for boilers installed in basements and
difficult locations.
2ELIABLEANDCOMPACTTHECONDENSATEPUMPCANBEINSTALLED
quickly and efficiently with any Ideal condensing boiler.
High level flue outlet kit
Simple to install, the high level flue outlet kit from Ideal
ensures that condensing plume needn’t be an issue on
any installation.
Quick and easy to install, the simple black kit comprises of a
CONCENTRICTERMINALINCLUDING mUEELBOWANDAMMmUE
elbow and terminal. One metre extensions are available to suit
site requirements.
The clever pack allows the plume to be exhausted neatly away
from the low level zone.
32
Flue Siting
There are a substantial number
of fluing options available
with the Ideal ranges, giving
excellent siting flexibility for
almost all applications.
The range of options include
standard and telescopic flues
as well as roof flue and powered
vertical flue options.
To ensure siting issues are kept
to a minimum High Level Flue
Outlet kit options and Flue
Deflector kits are available.
Minimum dimensions of flue terminal positions.
Flue terminal position
Min. Spacing
1. Directly below, above or alongside an opening
window, air vent or other ventilation opening.
MM
300
2. Below guttering, drain pipes or soil pipes.
BS5440-1 2008
MM
MM
3. Below eaves.
BS5440-1 2008
MM
MM
BS5440-1 2008
MM
MM
5. From vertical drain pipes or soil pipes.
BS5440-1 2008
MM
MM
6. From an internal or external corner or to a boundary
alongside the terminal.
BS5440-1 2008
MM
MM
7. Above ground, roof or balcony level.
MM
8. From a surface or a boundary facing a terminal.
MM
4. Below balconies or car port roof.
9. From a terminal facing a terminal.
MM
10.&ROMANOPENINGINACARPORTEGDOOROR
WINDOWINTODWELLING
MM
11.6ERTICALLYFROMATERMINALONTHESAMEWALL
MM
12. Horizontally from a terminal on the wall.
690
300
300
625
A
A
A
MM
Vertical flues
B
MM
MM
14. From a single wall face.
From corner walls.
MM
MM
15. Below velux window.
16. Above or side of velux window.
MM
MM
07
98
RF
13. Above the roof pitch with roof slope of all angles.
Above flat roof.
A = 600mm
B = 2000mm
The flue terminal shall not penetrate the shaded area of the roof
* Only one reduction down to 25mm is allowable per installation otherwise
BS5440-1 2008 dimensions must be followed.
33
Heating Solutions
Flueing - Logic+ and Logic Combi, Heat Only and System Boilers
&OR,OGIC,OGIC(EATONLY2EAR/UTLET&LUESEE0
(ORIZONTAL#ONCENTRICnMM$IAMETER
Flue
Ideal
Part No.
Maximum straight
flue length (mm)
640
3TANDARD(ORIZONTAL"PACKLOGIC
204644
4ELESCOPIC"PACKmUELOGIC
Standard Horizontal B pack
XEXTENSION0ACK$,OGIC
204644
6 x 203129
MAXLENGTHM
Telescopic B pack flue
XEXTENSION0ACK$,OGIC
6 x 203129
MAXLENGTHM
Standard Horizontal B pack
XEXTENSION0ACK$,OGIC
204644
8 x 203129
MAXLENGTHM
Telescopic B pack flue
XEXTENSION0ACK$,OGIC
8 x 203129
MAXLENGTHM
Standard Horizontal B pack
XEXTENSION0ACK$,OGIC
204644
9 x 203129
MODELS
Telescopic B pack flue
XEXTENSION0ACK$,OGIC
9 x 203129
MODELS
Flue
Ideal
Part No.
Maximum straight
flue length (mm)
Standard Horizontal B pack + 90°
%LBOW,OGIC
204644
203130
640
Telescopic B pack flue
%LBOWLOGIC
203130
Note:
The Standard Horizontal B pack flue is supplied unless otherwise requested with the Logic.
4HE4ELESCOPIC"0ACK&LUEISSUPPLIEDUNLESSOTHERWISEREQUESTEDWITHTHE,OGIC
Lengths are from centre line of boiler outlet to outside wall face.
7HEREEXTENSION$0ACKSARECUTTOLENGTHmAREDENDCONNECTORMUSTBERETAINED
Horizontal Flue with 1 x 90° Elbow
204644
5 x 203129
203130
MAXLENGTHM
X %LBOW
Telescopic B pack flue
X%XTENSION0ACK$
%LBOWLOGIC
5 x 203129
203130
MAXLENGTHM
X %LBOW
Standard Horizontal B pack
X%XTENSION0ACK$
%LBOW,OGIC
204644
X
203130
MAXLENGTHM
X %LBOW
Telescopic B pack flue
X%XTENSION0ACK$
%LBOWLOGIC
X
203130
MAXLENGTHM
X %LBOW
Standard Horizontal B pack
X%XTENSION0ACK$
%LBOW,OGIC
204644
8 x 203129
203130
MODELSMAX
LENGTHMX %LBOW
Telescopic B pack flue
X%XTENSION0ACK$
%LBOWLOGIC
8 x 203129
203130
MODELSMAX
LENGTHMX %LBOW
Note:
,ENGTHSARESUMOFALLSTRAIGHTLENGTHSBETWEENCENTRELINESOUTSIDEWALLFACE
Numbers of extension D packs give flexibility of lengths of straight at either side of elbow.
Where extension D packs are cut to length, flared end connector must be retained.
34
Standard Horizontal B pack
X%XTENSION0ACK$
%LBOW,OGIC
Horizontal Flue with 2 x 90° Elbow
Flue
Ideal
Part No.
Maximum straight
flue length (mm)
Standard Horizontal B pack
X %LBOW,OGIC
204644
2 x 203130
640
Telescopic B pack flue
X %LBOWLOGIC
2 x 203130
Standard Horizontal B pack
X%XTENSION0ACK$
X %LBOW,OGIC
204644
4 x 203129
2 x 203130
MAXLENGTHM
X %LBOW
Telescopic B pack flue
X%XTENSION0ACK$
X %LBOW,OGIC
4 x 203129
2 x 203130
MAXLENGTHM
X %LBOW
Standard Horizontal B pack
X%XTENSION0ACK$
X %LBOW,OGIC
204644
6 x 203129
2 x 203130
MAXLENGTHM
X %LBOW
Telescopic B pack flue
X%XTENSION0ACK$
X %LBOW,OGIC
6 x 203129
2 x 303130
MAXLENGTHM
X %LBOW
Standard Horizontal B pack
X%XTENSION0ACK$
X %LBOW,OGIC
204644
X
2 x 203130
MODELSMAX
LENGTHMX %LBOW
Telescopic B pack flue
X%XTENSION0ACK$
X %LBOW,OGIC
X
2 x 203130
MODELSMAX
LENGTHMX %LBOW
Flue
Ideal
Part No.
Maximum straight
flue length (mm)
Standard Horizontal B pack
X %LBOW,OGIC
204644
203131
640
Telescopic B pack flue
X %LBOWLOGIC
203131
Note:
,ENGTHSARESUMOFALLSTRAIGHTLENGTHSBETWEENCENTRELINESOUTSIDEWALLFACE
Numbers of extension D packs give flexibility of lengths of straight at either side of elbow.
Where extension D packs are cut to length, flared end connector must be retained.
Horizontal Flue with 2 x 45° Elbow
Standard Horizontal B pack
X%XTENSION0ACK$
X %LBOW,OGIC
204644
5 x 203129
203131
MAXLENGTHM
X%LBOW
Telescopic B pack flue
X%XTENSION0ACK$
X %LBOWLOGIC
5 x 203129
203131
MAXLENGTHM
X%LBOW
Standard Horizontal B pack
X%XTENSION0ACK$
X %LBOW,OGIC
204644
X
203131
MAXLENGTHM
X%LBOW
Telescopic B pack flue
X%XTENSION0ACK$
X %LBOW,OGIC
X
203131
MAXLENGTHM
X%LBOW
3TANDARD(ORIZONTAL"0ACK
X%XTENSION0ACK$
X %LBOW,OGIC
204644
8 x 203129
203131
MODELSMAX
LENGTHMX%LBOW
Telescopic B pack flue
X%XTENSION0ACK$
X %LBOWLOGIC
8 x 203129
203131
MODELSMAX
LENGTHMX%LBOW
Note:
,ENGTHSARESUMOFALLSTRAIGHTLENGTHSBETWEENCENTRELINESOUTSIDEWALLFACE
Numbers of extension D packs give flexibility of lengths of straight at either side of elbow.
Where extension D packs are cut to length, flared end connector must be retained.
35
Heating Solutions
Flueing - Logic+ and Logic Combi, Heat Only and System Boilers
2OOF&LUE3YSTEM
Flue
Ideal
Part No.
Maximum straight
flue length (mm)
2OOF&LUE+IT
6ERTICAL#ONNECTOR
+ Weather Collar
203132
204645
1325
2OOF&LUE+IT
6ERTICAL#ONNECTOR
XMAX%XTENSION0ACK$
+ Weather Collar
203132
204645
X
Note:
UNIVERSALWEATHERCOLLARSUITSANYROOFPITCHmATROOFWEATHERCOLLAR
2OOF&LUE3YSTEMWITHX %LBOW
Flue
2OOF&LUE+IT
6ERTICAL#ONNECTOR
XMAX%XTENSION0ACK$
+ 2 x 45° Elbow
+ Weather Collar
Ideal
Part No.
Maximum straight
flue length (mm)
203132
204645
6 x 203129
203131
6300
Note:
UNIVERSALWEATHERCOLLARSUITSANYROOFPITCH
152259: flat roof weather collar
0OWERED6ERTICAL&LUE3YSTEM
Flue
0OWERED6ERTICAL&LUE+IT
6ERTICAL#ONNECTOR
0OWERED6ERTICAL&LUE4ERMINAL
+ Weather Collar
%XTENSION0ACK$
3ECONDARY&LUE%XTENSION0IPEo
Ideal
Part No.
Maximum straight
flue length (mm)
203136
204645
203134
203129
203142
0RIMARYAND3ECONDARY
flue combined
maximum 22mm**
Note: Allows the boiler to be sited in a position where no access to an outside wall is
AVAILABLE0ERMITSTHECONCENTRICmUETORUNVERTICALLYFROMTHETOPOFTHEBOILERAND
obtain air supply within the roof space, the secondary flue continuing to the external flue
terminal. Offset applications are permissible though the maximum length is reduced.
UNIVERSALWEATHERCOLLARSUITSANYROOFPITCH
152259: flat roof weather collar
Where extension D packs are cut to length, the flared end connector must be retained.
† Secondary Flue extension pipes are available in 0.5, 1 and 2 metre lengths.
** See installation instructions for maximum primary and maximum secondary flue lengths.
36
Flueing & Installation Accessories Telescopic B
pack flue
Flue Extension 1m
(Pack D)
Horizontal flue
terminal
(600 long)
Ideal Part No.
204768
Ideal Part No.
204644
Ideal Part No.
203129
Logic+ and Logic Combi, Heat Only and System Boilers
Flue Elbow 90º
kit (60/100)
packaged
Flue Elbow 45º
kit (60/100)
packaged (pair)
Ideal Part No.
203130
Stand off kit*
Ideal Part No.
203131
Stand off kit **
Inc. piping
Ideal Part No.
204913
Ideal Part No.
204872
* Combi & System only, for Heat models - 206153. ** Combi only, for System & Heat models 206154.
Installation Accessories
Ideal Part No.
Combi
Heat
System
0REPIPING+IT
204854
0REPIPING+IT
206155
Weather Compensation Kit
204914
Weather Compensation Kit
206152
/PENTHERM(ARNESS+IT,OGIC/NLY
204915
0267ALL/UTLET0IPE+IT,OGIC/NLY
205126
DHW Expansion vessel Kit
205419
#ONDENSATE0UMP+IT
159991
Security Bracket Kit
4ERMINAL7ALL0LATE+IT
206164
9
8
9
8
9
9
9
9
9
8
8
8
8
9
8
8
8
9
9
9
8
9
8
9
8
9
8
9
9
8
Flueing Accessories
High Level Flue Outlet Kit
These easy to install kits allow the boiler flue outlet to be
extended external to the building, upwards to provide a flue
exit at high level, overcoming problems associated with
plume emission.
†
The kit comprises:
Ideal Part No.
2OOF&LUE+IT
203132
0OWEREDVERTICALmUETERMINALMM
203134
Flue vertical connector
204645
0OWEREDmUE+IT
203136
Flue Deflector 60 dia
7EATHER#OLLAR5NIVERSALMM
152258
7EATHER#OLLARmATROOFMM
152259
Flue Finishing Kit
155988
2EAR&LUE/UTLETKIT†
205990
&LUE&INISHING+IT†
206151
Balcony Flue Outlet Kit
Horizontal Flue Terminal 1000mm long
205518
3ECONDARYmUEEXTENSIONMXMMPAIR
203142
Logic+ & Logic Heat ONLY
Concentric terminal including fitted 90˚ flue elbow.
(This is specified in place of the normal standard B pack terminal).
60mm flue elbow and terminal.
An external 60mm diameter flue leads from the boiler
TERMINALWHICHINCLUDESA ELBOWATTHEmUEEXITTO
TERMINATEWITHA ELBOWCOMPLETEWITHGRILLE0USHlT
one metre extension pipes are used as required, and the
fixing clips supplied support the system from the wall. Both
90° and 45° elbows are available to provide routing options.
diagram representative only
Logic+ & Logic (All models)
Ideal Part No.
High Level Flue Outlet Kit
204912
,OGIC,OGIC(EAT2EAR&LUE
/UTLET/.,9(IGH
,EVEL&LUE/UTLETKIT
205989
1m x 60mm extension pipe
WITHBRACKET
203228
90° Elbow
203229
%LBOWPAIR
203230
IMPORTANT
Flue must
always slope at
least 11/ 2˚
back to the
boiler
If additional elbows to those supplied in the
High Level Flue Outlet kit are used, deduct the following
RESISTANCESMETRESFROMTHEMAXIMUMBOILERmUELENGTH
Logic+ & Logic (All models)
90° Elbow
%LBOWPAIR
Metres
1.4
1.25
Vertical
Horizontal Left or Right
45˚ Left or Right
Heating Solutions
Flueing - Logic+ and Logic Heat Only Boilers
2EAR/UTLET&LUE4ERMINALMM
Flue
Ideal
Part No.
Maximum straight
flue length (mm)
2EAROUTLET&LUE4ERMINAL
205990
442
Note:
Length is wall thickness.
Minimum wall thickness permissible is 115mm.
No extensions are permitted.
Flueing accessories
Flueing Accessories
Ideal Part No.
2EAR/UTLET&LUE4ERMINAL
205990
&LUE&INISHING+IT
206151
38
Logic & Logic+ Heat Only
(IGH,EVEL/UTLET+IT
Ideal Part No.
205989
&ORMEXTENSIONANDELBOWSUSESTANDARDPARTS
Flueing - Logic Code Combi Boilers
(ORIZONTAL#ONCENTRICnMM$IAMETER
Flue
Ideal
Part No.
Maximum straight
flue length (mm)
3TANDARD(ORIZONTAL"PACKLOGIC
204644
640
Standard Horizontal B pack
XEXTENSION0ACK$,OGIC
204644
6 x 203129
MAXLENGTHM
Standard Horizontal B pack
XEXTENSION0ACK$,OGIC
204644
8 x 203129
MAXLENGTHM
Standard Horizontal B pack
XEXTENSION0ACK$,OGIC
204644
9 x 203129
MODELS
Flue
Ideal
Part No.
Maximum straight
flue length (mm)
Standard Horizontal B pack + 90°
%LBOW,OGIC
204644
203130
640
Note:
Lengths are from centre line of boiler outlet to outside wall face.
7HEREEXTENSION$0ACKSARECUTTOLENGTHmAREDENDCONNECTORMUSTBERETAINED
Horizontal Flue with 1 x 90° Elbow
Standard Horizontal B pack
X%XTENSION0ACK$
%LBOW,OGIC
204644
5 x 203129
203130
MAXLENGTHM
X %LBOW
Standard Horizontal B pack
X%XTENSION0ACK$
%LBOW,OGIC
204644
X
203130
MAXLENGTHM
X %LBOW
Standard Horizontal B pack
X%XTENSION0ACK$
%LBOW,OGIC
204644
8 x 203129
203130
MODELSMAXLENGTH
MX %LBOW
Note:
,ENGTHSARESUMOFALLSTRAIGHTLENGTHSBETWEENCENTRELINESOUTSIDEWALLFACE
Numbers of extension D packs give flexibility of lengths of straight at either side of elbow.
Where extension D packs are cut to length, flared end connector must be retained.
39
Heating Solutions
Horizontal Flue with 2 x 90° Elbow
Flue
Ideal
Part No.
Maximum straight
flue length (mm)
Standard Horizontal B pack
X %LBOW,OGIC
204644
2 x 203130
Standard Horizontal B pack
X%XTENSION0ACK$
X %LBOW,OGIC
204644
4 x 203129
2 x 203130
MAXLENGTHM
X %LBOW
Standard Horizontal B pack
X%XTENSION0ACK$
X %LBOW,OGIC
204644
6 x 203129
2 x 203130
MAXLENGTHM
X %LBOW
Standard Horizontal B pack
X%XTENSION0ACK$
X %LBOW,OGIC
204644
X
2 x 203130
MODELSMAXLENGTH
MX %LBOW
Flue
Ideal
Part No.
Maximum straight
flue length (mm)
Standard Horizontal B pack
X %LBOW,OGIC
204644
203131
640
Standard Horizontal B pack
X%XTENSION0ACK$
X %LBOW,OGIC
204644
5 x 203129
203131
MAXLENGTHM
X%LBOW
Standard Horizontal B pack
X%XTENSION0ACK$
X %LBOW,OGIC
204644
X
203131
MAXLENGTHM
X%LBOW
3TANDARD(ORIZONTAL"0ACK
X%XTENSION0ACK$
X %LBOW,OGIC
204644
8 x 203129
203131
MODELSMAXLENGTH
MX%LBOW
640
Note:
,ENGTHSARESUMOFALLSTRAIGHTLENGTHSBETWEENCENTRELINESOUTSIDEWALLFACE
Numbers of extension D packs give flexibility of lengths of straight at either side of elbow.
Where extension D packs are cut to length, flared end connector must be retained.
Horizontal Flue with 2 x 45° Elbow
Note:
,ENGTHSARESUMOFALLSTRAIGHTLENGTHSBETWEENCENTRELINESOUTSIDEWALLFACE
Numbers of extension D packs give flexibility of lengths of straight at either side of elbow.
Where extension D packs are cut to length, flared end connector must be retained.
40
Flueing - Logic Code Combi Boilers
2OOF&LUE3YSTEM
Flue
Ideal
Part No.
Maximum straight
flue length (mm)
2OOF&LUE+IT
6ERTICAL#ONNECTOR
+ Weather Collar
203132
204645
1325
2OOF&LUE+IT
6ERTICAL#ONNECTOR
XMAX%XTENSION0ACK$
+ Weather Collar
203132
204645
X
Note:
UNIVERSALWEATHERCOLLARSUITSANYROOFPITCHmATROOFWEATHERCOLLAR
2OOF&LUE3YSTEMWITHX %LBOW
Flue
2OOF&LUE+IT
6ERTICAL#ONNECTOR
XMAX%XTENSION0ACK$
+ 2 x 45° Elbow
+ Weather Collar
Ideal
Part No.
Maximum straight
flue length (mm)
203132
204645
6 x 203129
203131
6300
Note:
UNIVERSALWEATHERCOLLARSUITSANYROOFPITCH
152259: flat roof weather collar
0OWERED6ERTICAL&LUE3YSTEM
Flue
0OWERED6ERTICAL&LUE+IT
6ERTICAL#ONNECTOR
0OWERED6ERTICAL&LUE4ERMINAL
+ Weather Collar
%XTENSION0ACK$
3ECONDARY&LUE%XTENSION0IPEo
Ideal
Part No.
Maximum straight
flue length (mm)
203136
204645
203134
203129
203142
0RIMARYAND3ECONDARY
flue combined
maximum 22mm**
Note: Allows the boiler to be sited in a position where no access to an outside wall is
AVAILABLE0ERMITSTHECONCENTRICmUETORUNVERTICALLYFROMTHETOPOFTHEBOILERAND
obtain air supply within the roof space, the secondary flue continuing to the external flue
terminal. Offset applications are permissible though the maximum length is reduced.
UNIVERSALWEATHERCOLLARSUITSANYROOFPITCH
152259: flat roof weather collar
Where extension D packs are cut to length, the flared end connector must be retained.
† Secondary Flue extension pipes are available in 0.5, 1 and 2 metre lengths.
** See installation instructions for maximum primary and maximum secondary flue lengths.
Heating Solutions
Flueing & Installation Accessories Telescopic B
pack flue
Flue Extension 1m
(Pack D)
Horizontal flue
terminal
(600 long)
Ideal Part No.
204768
Ideal Part No.
204644
Flue Elbow 90º
kit (60/100)
packaged
Ideal Part No.
203129
Installation Accessories
Logic Code Combi
Ideal Part No.
203130
Ideal Part No.
Flue Elbow 45º
kit (60/100)
packaged (pair)
Ideal Part No.
203131
Stand-off kit
Ideal Part No.
206383
Flueing Accessories
Stand off kit
Inc. piping
Ideal Part No.
204872
Ideal Part No.
0REPIPING+IT
2OOF&LUE+IT
203132
3TANDOFF+ITINCLUDING5PWARD0IPING
0OWEREDVERTICALmUETERMINALMM
203134
Weather Compensation Kit
204914
Flue vertical connector
204645
Opentherm Harness Kit
204915
0OWEREDmUE+IT
203136
0267ALL/UTLET0IPE+IT
205126
Flue Deflector 60 dia
DHW Expansion vessel Kit
205419
7EATHER#OLLAR5NIVERSALMM
152258
#ONDENSATE0UMP+IT
159991
7EATHER#OLLARmATROOFMM
152259
Security Bracket Kit
Flue Finishing Kit
155988
&LUE&INISHING+IT
206151
Balcony Flue Outlet Kit
Horizontal Flue Terminal 1000mm long
205518
High Level Flue Outlet Kit
These easy to install kits allow the boiler flue outlet
to be extended external to the building, upwards to
provide a flue exit at high level, overcoming problems
associated with plume emission.
An external 60mm diameter flue leads from the boiler
TERMINALWHICHINCLUDESA ELBOWATTHEmUE
EXITTOTERMINATEWITHA ELBOWCOMPLETEWITH
GRILLE0USHlTONEMETREEXTENSIONPIPESAREUSED
as required, and the fixing clips supplied support the
system from the wall. Both 90° and 45° elbows are
available to provide routing options.
Logic Code Combi
The kit comprises:
204912
1m x 60mm extension pipe
WITHBRACKET
203228
90° Elbow
203229
%LBOWPAIR
203230
%LBOWPAIR
42
203142
Concentric terminal including fitted 90˚ flue elbow.
(This is specified in place of the normal standard B pack terminal).
60mm flue elbow and terminal.
diagram representative only
IMPORTANT
Flue must
always slope at
least 11/ 2˚
back to the
boiler
If additional elbows to those supplied in the
High Level Flue Outlet kit are used, deduct the
FOLLOWINGRESISTANCESMETRESFROMTHEMAXIMUM
boiler flue length.
90° Elbow
205024
3ECONDARYmUEEXTENSIONMXMMPAIR
Ideal Part No.
High Level Flue Outlet Kit
Logic Code Combi
Concentric flue screw retaining kit
Metres
1.4
1.25
Vertical
Horizontal Left or Right
45˚ Left or Right
Flueing - Mexico HE
Horizontal Flue
Flue
Ideal
Part No.
Maximum straight
flue length (mm)
Standard pack B
201816
Standard pack B
+ 3 x Extension pack D
201816
3 x 201180
3490*
Standard pack B
+ 6 x Extension pack D
201816
6 x 201180
6000
*Maximum HE30 & 36 length is 3000mm
Note: Where extension D packs are cut to length, flared end connector must
be retained.
Horizontal Flue with 1 x 90° Elbow
Flue
Ideal
Part No.
Maximum straight
flue length (mm)
Standard pack B
+ 90° Elbow
201816
201182
Standard pack B
X%XTENSIONPACK$(%
+ 90° Elbow
201816
2 x 201180
201182
2085*
Standard pack B
X%XTENSIONPACK$(%
+ 90° Elbow
201816
5 x 201180
201182
4500*
*Maximum HE30 & 36 length is 2000mm
Note: Where extension D packs are cut to length, flared end connector must
be retained.
Horizontal Flue with 2 x 45° Elbow
Flue
Ideal
Part No.
Maximum straight
flue length (mm)
Standard pack B
+ 2 x 45° Elbow
201816
201183
Standard pack B
X%XTENSIONPACK$(%
+ 2 x 45° Elbow
201816
2 x 201180
201183
1585*
Standard pack B
X%XTENSIONPACK$(%
+ 2 x 45° Elbow
201816
5 x 201180
201183
4000
*Maximum HE30 & 36 length is 1500mm
Note: Where extension D packs are cut to length, flared end connector must
be retained.
43
Heating Solutions
6ERTICAL%XTENSION
0ERMITSHORIZONTALmUESECTIONTOBERAISEDTOCLEARRESTRICTIONS
Flue
Ideal
Part No.
Maximum straight
flue length (mm)
Standard pack B
6ERTICALOUTLETKIT
!PPROPRIATE%XTENSION0ACKS
201816
201180
Note: Maximum flue length is combined horizontal and vertical.
2OOF&LUE3YSTEM
Flue
Ideal
Part No.
Maximum straight
flue length (mm)
2OOFmUEKIT
6ERTICALCONNECTOR
+ Weather collar
201189
201869
1000
2OOFmUEKIT
6ERTICALCONNECTOR
+ Weather collar
MAXIMUMX%XTENSIONPACKS
MAXX%XTENSIONPACKS
201189
201869
X
4 x 201180
8000
(%
(%
Note:5NIVERSALWEATHERCOLLARSUITSANYROOFPITCH
*158432: flat roof weather collar
2OOF&LUE3YSTEMSWITHX %LBOW
Flue
2OOFmUEKIT
6ERTICALCONNECTOR
+ Weather collar
+ 2 x 45° Elbow
MAXIMUMX%XTENSIONPACKS
MAXX%XTENSIONPACKS
Ideal
Part No.
201189
201869
201183
6 x 201180
3 x 201180
Note: 5NIVERSALWEATHERCOLLARSUITSANYROOFPITCH
*158432: flat roof weather collar
44
Maximum straight
flue length (mm)
6000
(%
(%
Flueing - Mexico HE
Flueing accessories
Flue Extension 1m
(Pack D)
Flue finishing kit
Flue Elbow 90º kit
Ideal Part No.
201180
Ideal Part No.
201181
Ideal Part No.
201182
Roof flue kit
The kit comprises:
Ideal Part No.
201183
Weather collar
- universal
Weather collar
- flatroof
Ideal Part No.
201189
Flue Elbow 45º
(pair)
Ideal Part No.
158432
Ideal Part No.
158431
202012
90° Elbow
%LBOWPAIR
Ideal Part No.
201896
2EMOTEUSERCONTROL+IT
Concealment panel Kit
201895
These easy to install kits allow the boiler flue outlet to be
extended external to the building, upwards to provide a flue exit
at high level, overcoming problems associated with
plume emission.
diagram representative only
202008
Ideal Part No.
201871
159991
Boiler flue turret supplied with boiler
1m x 60mm extension pipe
WITHBRACKET
Ideal Part No.
201869
Vertical outlet
kit 100mm
Terminal Wall plate Kit
60mm flue elbow and terminal.
High Level Flue Outlet Kit
Vertical flue
connector 100mm
#ONDENSATE0UMP+IT
(This is specified in place of the normal standard B pack terminal).
Ideal Part No.
Ideal Part No.
202011
Installation Accessories
Concentric terminal including fitted 90˚ flue elbow.
Mexico HE
Flue deflector kit
An external 60mm diameter flue leads from the boiler terminal
WHICHINCLUDESA ELBOWATTHEmUEEXITTOTERMINATEWITH
A ELBOWCOMPLETEWITHGRILLE0USHlTONEMETREEXTENSION
pipes are used as required, and the fixing clips supplied
support the system from the wall. Both 90° and 45° elbows are
available to provide routing options.
If additional elbows to those supplied in the High Level Flue Outlet kit are used,
DEDUCTTHEFOLLOWINGRESISTANCESMETRESFROMTHEMAXIMUMBOILERmUELENGTH
Mexico HE
Metres
202009
90° Elbow
1.5
202010
%LBOWPAIR
1.0
45
Heating Solutions
Technical Specification
Logic+ Combi
Boiler Model
Size
24
395
395
User Interface
38
38
Maximum Installation Weight kg
32.8
33
32.8
33
#(OUTPUTK7-IN-AX #
4.8 - 24.2
6.1 - 24.2
4.8 - 24.2
6.1 - 24.2
#(OUTPUTK7-IN-AX #
5.1 - 25.6
6.4 - 25.6
5.1 - 25.6
6.4 - 25.6
35.3
24.2
30.3
35.3
24.2
30.3
9.9
12.4
14.5
9.9
12.4
14.5
89.0
89.0
88.9
89.0
89.0
88.9
NOx Classification
CLASS 5
CLASS 5
!DJUSTABLETO,0'
No
No
Heat exchanger material
Aluminium - Silicon Alloy
Aluminium - Silicon Alloy
Burner type
$OWNWARDlRING0REMIX
$OWNWARDlRING0REMIX
Fully modulating
Yes
Yes
DHW plate heat exchanger
Yes
Yes
Integrated hydroblock
Yes
Yes
Yes
Suitable for sealed systems
Yes
Suitable for open-vent systems
No
No
Filling loop
Yes
Yes
0REWIREDMAINSLEAD
Yes
Yes
Flow regulator
Yes
Yes
In-built system bypass
Yes
Yes
)NBUILTCONDENSATETRAPSIPHON
Yes
Yes
In-built boiler frost protection
Yes
Yes
Zero compartment ventilation
Yes
Yes
4OPMMFROMTOPOFBOILER
165
165
3IDEMM
2.5
2.5
"OTTOMMM
100
100*
&RONTMM
450
450*
User display
0LAINTEXT
$IGITAL!LPHANUMERIC
Text display & manual controls
Digital display & manual controls
0LAIN%NGLISHTEXT
Fault diagnosis display
Manual heating & hot water controls
Manual heating & hot water controls
Diagnostics
User adjustable
Flues
‘Eco’ setting on CH
Yes
Yes
)NBUILT0ROGRAMMER
Optional
Optional
0REPIPINGKIT
Optional
Optional
Stand-off kit
Optional
Optional
Stand off kit inc. pipes.
Optional
Optional
Max horizontal
Max vertical
0OWERED6ERTICAL
Connections *2
9m
8m
M
6m
9m
8m
6m
M
22m
22m
Gas Supply Connection
15mm copper compression
15mm copper compression
CH Flow Connection
22mm copper compression
22mm copper compression
#(2ETURN#ONNECTION
22mm copper compression
22mm copper compression
Inlet Connection - DHW
15mm copper compression
15mm copper compression
Outlet Connection - DHW
15mm copper compression
15mm copper compression
21.5mm
21.5mm
Condensate Drain
46
User interface
Pipes
35
7EIGHTPACKEDKG
3%$"5+
Clearances
30
Width
$(7OUTPUTK7-AX
Installation
24
Height
$(7mOWRATELMIN #RISE
Construction
35
#ASINGDIMENSIONSHWDMM
Depth
Performance
Logic Combi
30
* can be reduced to 5mm for cupboard fit, 450mm required for servicing.
*2 FOROUTPUTSEXCEEDINGK7"TUHMMPRIMARYPIPEWORKWILLBEREQUIRED
Logic Code Combi
Boiler Model
Size
Performance
26
Height
395
Depth
7EIGHTPACKEDKG
41.3
41.4
41.6
Maximum Installation Weight kg
35.9
36.0
36.2
#(OUTPUTK7-IN-AX #
4.8 - 24.2
6.1 - 24.2
#(OUTPUTK7-IN-AX #
5.1- 25.6
6.4 - 25.6
26.1
38.2
$(7mOWRATELMIN #RISE
13.4
3%$"5+
89.0
89.0
88.9
NOx Classification
5
!DJUSTABLETO,0'
No
Heat exchanger material
Cast aluminium- silicon alloy
Burner type
Downward firing pre-mix
Fully modulating
Installation
Yes
DHW plate heat exchanger
Yes
Integrated hydroblock
Yes
Suitable for sealed systems
Yes
Suitable for open-vent systems
No
Filling loop
Yes
0REWIREDMAINSLEAD
Yes
Flow regulator
Yes
In-built system bypass
Yes
)NBUILTCONDENSATETRAPSIPHON
Clearances
User Interface
Yes
0UMPEXERCISE
Yes
In-built boiler frost protection
Yes
Zero compartment ventilation
Yes
Copper tail connections
Yes
4OPMMFROMTOPOFBOILER
165
3IDEMM
2.5
"OTTOMMM
100
&RONTMM
450*
User display
$IGITAL!LPHANUMERIC
User interface
Pipes
Flues
Digital display & manual controls
Diagnostics
Fault diagnostic display
User adjustable
Manual heating control
‘Eco’ setting on CH
Yes
)NBUILT0ROGRAMMER
Optional
0REPIPINGKIT
Yes
Stand-off kit
Yes
Stand off kit inc. pipes.
Yes
Security bracket kit
Yes
0267ALL/UTLET+IT
Yes
4ERMINAL7ALL0LATE+IT
No
Weather Compensation kit
Yes
Max horizontal
Max vertical
9
8
0OWERED6ERTICAL
22
Yes
No
Gas
15mm
#(&LOW2ETURN
22mm
DHW Inlet & Outlet
15mm
0RESSURERELIEFVALVE
Condensate drain
* can be reduced to 5mm for cupboard fit, 450mm required for servicing
6
High Level Flue Outlet Kit
$IRECT2EAR&LUE+IT
Connections
38
830
Width
$(7OUTPUTK7-AX
Construction
33
15mm
21.5mm
Heating Solutions
Technical Specification
Logic+ Heat Only
Boiler Model
Size
12
15
18
Width
395
Depth
7EIGHTPACKEDKG
Maximum Installation Weight kg
23.0
#(OUTPUTK7-IN-AX #
4.8 - 12.0
4.8 - 15.0
4.8 - 18.0
4.8 - 24.2
6.1 - 30.3
#(OUTPUTK7-IN-AX #
5.1 - 13.0
5.1 - 15.9
5.1 - 19.1
5.1 - 25.6
6.4 - 31.0
89.5
89.6
$(7OUTPUTK7-AX
.!
$(7mOWRATELMIN #RISE
3%$"5+
.!
89.4
89.3
89.2
NOx Classification
CLASS 5
!DJUSTABLETO,0'
Construction
No
Heat exchanger material
Cast Aluminium - Silicon Alloy
$OWNWARDlRING0REMIX
Burner type
Installation
Fully modulating
Yes
DHW plate heat exchanger
.!
Integrated hydroblock
.!
Suitable for sealed systems
Yes
Suitable for open-vent systems
Yes
Filling loop
No
0REWIREDMAINSLEAD
No
Flow regulator
.!
In-built system bypass
Clearances
User Interface
No
)NBUILTCONDENSATETRAPSIPHON
Yes
In-built boiler frost protection
Yes
Zero compartment ventilation
Yes
4OPMMFROMTOPOFBOILER
REAROUTLETmUE
3IDEMM
2.5
"OTTOMMM
100
&RONTMM
450*
User display
$IGITAL!LPHANUMERIC
User interface
Pipes
Digital display & manual controls
Diagnostics
Fault diagnosis display
User adjustable
Manual heating control
‘Eco’ setting on CH
Yes
)NBUILT0ROGRAMMER
No
0REPIPINGKIT
No
Stand-off kit
Yes
Stand off kit inc. pipes.
Flues
No
Max horizontal
9m
Max vertical M
0OWERED6ERTICAL
Connections *2
22m
8m
!LSOAVAILABLE(IGH,EVEL&LUE/UTLET+IT
$IRECT2EAR&LUE+IT
Gas Supply Connection
15mm
CH Flow Connection
22mm
#(2ETURN#ONNECTION
22mm
Inlet Connection - DHW
.!
Outlet Connection - DHW
Condensate Drain
48
30
#ASINGDIMENSIONSHWDMM
Height
Performance
24
.!
21.5mm
* can be reduced to 5mm for cupboard fit, 450mm required for servicing.
*2 FOROUTPUTSEXCEEDINGK7"TUHMMPRIMARYPIPEWORKWILLBEREQUIRED
Logic Heat Only
12
15
Logic+ System
18
24
30
15
18
395
395
34.4
23.0
4.8 - 15.0
4.8 - 18.0
4.8 - 24.2
6.1 - 30.3
4.8 - 15.0
4.8 - 18.0
5.1 - 13.0
5.1 - 15.9
5.1 - 19.1
5.1 - 25.6
6.4 - 31.0
5.1 - 15.9
5.1 - 19.1
.!
89.2
5.1 - 25.6
6.4 - 31.0
89.6
89.3
89.5
89.6
89.2
CLASS 5
No
No
Cast Aluminium - Silicon Alloy
Cast Aluminium - Silicon Alloy
$OWNWARDlRING0REMIX
$OWNWARDlRING0REMIX
Yes
Yes
.!
.!
.!
.!
Yes
Yes
Yes
No
No
No
No
Yes
.!
.!
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
REAROUTLETmUE
165
2.5
2.5
100
100
450*
450*
$IGITAL!LPHANUMERIC
$IGITAL!LPHANUMERIC
Digital display & manual controls
Digital display & manual controls
Fault diagnosis display
Fault diagnosis display
Manual heating control
Manual heating control
Yes
Yes
No
No
No
Yes
Yes
Yes
No
9m
22m
6.1 - 30.3
.!
89.5
CLASS 5
M
4.8 - 24.2
.!
.!
89.3
30
28.0
4.8 - 12.0
89.4
24
Yes
8m
!LSOAVAILABLE(IGH,EVEL&LUE/UTLET+IT
$IRECT2EAR&LUE+IT
9m
8m
M
22m
15mm
15mm
22mm
22mm
22mm
22mm
.!
.!
.!
.!
21.5mm
21.5mm
49
Heating Solutions
Technical Specification
Logic System
Boiler Model
15
18
Height
Width
395
Depth
7EIGHTPACKEDKG
34.4
Maximum Installation Weight kg
Performance
4.8 - 24.2
6.1 - 30.3
5.1 - 25.6
6.4 - 31.0
89.5
89.6
28.0
#(OUTPUTK7-IN-AX #
4.8 - 15.0
4.8 - 18.0
#(OUTPUTK7-IN-AX #
5.1 - 15.9
5.1 - 19.1
$(7OUTPUTK7-AX
.!
$(7mOWRATELMIN #RISE
3%$"5+
.!
89.3
89.2
NOx Classification
CLASS 5
!DJUSTABLETO,0'
Heat exchanger material
Construction
Burner type
Installation
No
Cast Aluminium - Silicon Alloy
$OWNWARDlRING0REMIX
Fully modulating
Yes
DHW plate heat exchanger
.!
Integrated hydroblock
.!
Suitable for sealed systems
Yes
Suitable for open-vent systems
No
Filling loop
No
0REWIREDMAINSLEAD
Yes
Flow regulator
.!
In-built system bypass
Clearances
User Interface
Yes
)NBUILTCONDENSATETRAPSIPHON
Yes
In-built boiler frost protection
Yes
Zero compartment ventilation
Yes
4OPMMFROMTOPOFBOILER
165
3IDEMM
2.5
"OTTOMMM
100
&RONTMM
450*
User display
$IGITAL!LPHANUMERIC
User interface
Digital display & manual controls
Diagnostics
Fault diagnosis display
User adjustable
Manual heating control
‘Eco’ setting on CH
Yes
)NBUILT0ROGRAMMER
No
0REPIPINGKIT
Pipes
Stand-off kit
Yes
Yes
Max vertical
0OWERED6ERTICAL
2
Yes
Stand off kit inc. pipes.
Max horizontal
Flues
9m
8m
M
22m
Gas Supply Connection
15mm
CH Flow Connection
22mm
#(2ETURN#ONNECTION
22mm
Inlet Connection - DHW
.!
Outer Connection - DHW
Condensate Drain
50
30
#ASINGDIMENSIONSHWDMM
Size
Connections *
24
.!
21.5mm
* can be reduced to 5mm for cupboard fit, 450mm required for servicing.
*2 FOROUTPUTSEXCEEDINGK7"TUHMMPRIMARYPIPEWORKWILLBEREQUIRED
Mexico HE
15
18
24
30
36
850
450
530
54
69
8.8 - 14.6
8.8 - 18.2
8.8 - 23.4
10.6 - 30.1
9.6 - 15.5
9.6 - 19.2
9.6 - 25.1
11.4 - 32.8
11.4 - 39.8
88.9
89.0
.!
.!
89.4
88.8
Class 5
No
Cast Aluminium - silicon alloy
Downward firing pre-mix burner
Yes
.!
.!
Yes
Yes
No
No
.!
No
Yes
Yes
Yes
20
5
.!
450
Alpha Numeric
Digital display & manual controls
Fault codes
Yes
No
No
Standard
.!
.!
6m
3m
8m
5m
.!
.!
2CšINCHES
22mm copper compression
22mm copper compression
.!
.!
21.5mm
51
Ideal Service & Support
Support
When you choose to work with Ideal you can
Our rigorous research and development
be confident to know that you’re partnering
procedures and manufacturing quality
with a British manufacturer that’s supported
control checks ensures that all of our
by a dedicated national service team,
products are produced to the highest of
delivering help and advice to you and your
standards, delivering total home comfort
customers, 364 days a year.
and peace of mind.
52
Service
After-sales
Our dedicated service team of engineers,
Our call centre team based in Hull are
are fully trained to exacting standards and
comprehensively trained to provide tailored
are Gas Safe* registered, provide one-to-one
advice to homeowners and the trade.
advice on the road, over the phone or via the
net to thousands of customers each year.
Installer helpline 01482 498663
Installer Logic helpline 01482 445570
Training
Homeowner helpline 01482 498660
Here at Ideal, we understand that as a
heating engineer, you want the confidence
Monday - Friday
8am - 5pm
and knowledge to be able to install and
Saturday
8am - 2pm
service a wide range of products.
Sunday
8am - 12pm
With this in mind, we have created a series
of one and two day product training courses
on all of our domestic boilers and renewable
technologies.
0ROVIDINGAMIXOFHANDSONANDTHEORYBASED
classroom learning, each Ideal training course
has been designed specifically with the
heating engineer in mind.
For more information, please contact the
training department on 01482 498432
53
Ideal Service & Support
Parts
Ideal's extensive quality testing procedures
Ideal spare parts can be obtained from
ensure that all of our products are
any of Ideal’s nationwide network of
manufactured to the highest of quality
approved stockists.
standards.
For information about Ideal spare parts and
If in the unlikely event that a spare part is
FORALISTOFSTOCKISTSPLEASECALLOUR0ARTS
required, then you can rest assured that
department on 01482 498665, or visit our
most parts are readily available to order via
website www.idealheating.com
your local spares outlet up to 10 years after
appliance production has ceased.
54
55
Ideal Heating
0/"OX
National Avenue
Kingston Upon Hull
HU5 4JN
T: 01482 492251
www.idealheating.com
05.11
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement