Chauvet | Colordash Par-Tri | User manual | Chauvet Colordash Par-Tri User manual

Chauvet Colordash Par-Tri User manual
Quick Reference Guide
COLORdash™ Par-Tri QRG
About this The COLORdash™ Par-Tri Quick Reference Guide (QRG) only contains
Guide the product’s connection and mounting information as well as the menu
options and the DMX values.
·
Disclaimer ·
This Quick Reference Guide DOES NOT replace the product’s User
Manual, which you can download from www.chauvetlighting.com.
Read ALL the disclaimers and safety notes in this document as well as
those in the product’s user manual before installing, operating, or
maintaining this product.
Safety Notes · DO NOT open this fixture unless instructed. It contains no user·
·
·
·
·
·
·
·
·
·
serviceable parts.
DO NOT look at the light source when this fixture is on.
DO NOT touch the fixture when it is operating because it may be hot.
DO NOT cover the ventilation slots when the fixture is operating to
avoid internal overheating.
DO NOT install or operate this fixture where there is less than 50 cm to
the nearest surface to allow adequate ventilation around it.
DO NOT leave any flammable material within 50 cm from this fixture
while operating or connected to the power outlet to minimize the risk of
fire.
DO NOT mount this fixture overhead without using a safety cable.
DO NOT operate this fixture outdoors or in any location where dust,
excessive heat, water, or humidity may affect it.
DO NOT operate this fixture if you see damage on the housing, lenses,
or cables. In any of these cases, have the damaged parts replaced by an
authorized technician at once.
DO NOT connect this fixture to a dimmer or rheostat.
ONLY connect this fixture to a grounded and protected circuit.
What is · One COLORdash™ Par-Tri (with barn doors pre-installed)
Included · One power input cable with plug
·
·
·
·
One power linking cable (6.6 ft/2 m)
One set of replacement screws for barn doors removal
Warranty Card
Quick Reference Guide
Page 2 of 8
COLORdash™ Par-Tri QRG
Features
Options
AC Power
Power
Linking
Fuse
Replacement
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
3, 4, or 9-channel tri color LED wash fixture with ID addressing
Operating modes:
3-channel:
RGB control
4-channel:
RGB, dimmer
9-channel:
RGB, dimmer, color macro, strobe, auto/custom,
auto speed, ID addressing
RGB color mixing with or without DMX control
Automatic (pre-set) and custom (editable) programs
Recall auto and custom programs via DMX
Pre-programmed color macros
Color temperature presets (3,200~8,500 K)
Master/Slave operation
Transfer custom programs between fixtures
High-power, 3 W tri-color LEDs
IEC power connectors
Power linking: max 20 units @ 120 V
Includes 6.6 ft (2 m) power extension cable
3-pin DMX input and output connectors
LCD display with password protection
Double-bracketed yoke for overhead or floor mounting
Adjustable barn doors to direct output (includes gel frame)
Additional threaded hole on rear for mounting (size M 10)
·
33 ft (10 m) power extension cable (EXT-2)
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
You can link up to twenty (20) COLORdash™ Par-Tri units to this fixture
at 120 VAC. Make sure to never exceed this number when linking this
fixture.
1.
2.
3.
With a Phillips #2 head screwdriver, unscrew the fuse holder cap
from its housing.
Remove the blown fuse from the fuse holder cap and replace it
with a good fuse of the exact same type and rating.
Screw the fuse holder cap back in its place and reconnect power.
Page 3 of 8
COLORdash™ Par-Tri QRG
Mounting Before mounting this product, read the Safety Notes at the beginning of
this guide and in the product’s user manual. Then, follow the mounting
procedure indicated in the Setup chapter of the User Manual.
Product
Mounting
Diagram
Floor Mounting
Overhead Mounting
Control Panel
Description
Button
<MENU>
<ENTER>
<UP>
<DOWN>
Function
Exits from the current menu or function
Enables the currently displayed menu or sets the currently
selected value into the selected function
Navigates upwards through the menu list and increases
the numeric value when in a function
Navigates downwards through the menu list and
decreases the numeric value when in a function
Programming For details on how to program this product, please refer to the product’s
user manual.
Password After being prompted to enter the password, press:
<UP>, <DOWN>, <UP>, <DOWN>, and <ENTER>
Page 4 of 8
COLORdash™ Par-Tri QRG
Menu Options
Main Level
2
nd
Level
rd
3 Level
Description
Red
STATIC
Green
000~255
Blue
Strobe
AUTO
ADDRESS
RUN
00~20
Auto 1~10
0~255
Custom 1~10
001~512
Choose from 10 automatic programs
Choose from 10 customizable programs
DMX = Receives signals from DMX controller
Slave = Receives signals from master fixture
DMX/Slave
9-channel (D-RGB-CM-S-A/C-A/S-ID)
N/A
ARC1
3-channel (RGB)
ARC1 + D
ID
Select a strobe frequency (0~20 Hz)
Sets the DMX starting address
STAGE1
PERSON
Combine red, green, and blue to generate a
custom color.
4-channel (RGB-D)
0~66
Assigns the ID address to a fixture
HIGH
FAN
NORMAL
N/A
AUTO
Selects fan speed
LOW
RED
GREEN
EDIT
CUSTOM SCENE
(1~10)
(01~30)
FADE
Reset to Factory?
SETTINGS
Upload Custom?
COLOR
PASSWORD
ON/OFF
Combine red, green, and blue to generate a
custom color (0~100%)
BLUE
STROBE
TIME
ID ON/OFF
000~255
00~20
000~255
ON/OFF
Press <ENTER> twice
Selects the strobe frequency (0~20 Hz)
Defines the step duration (0~100%)
Defines the fade duration (0~100%)
Turns ID addressing on or off
Defaults the fixture to factory settings
Uploads custom programs to other fixtures
OFF
RGB max = max output / unbalanced white
UC
RGB max = matches older fixtures’ output
N/A
Turns the password on or off
Password automatically activates after 30 s
of control panel inactivity
Page 5 of 8
COLORdash™ Par-Tri QRG
DMX Values
STAGE 1
Channel Function
1
4
Dimmer
Red
Step Time
Green
Fade Time
Blue
5
Color Macro +
White Balance
6
Strobe
7
Auto + Custom
Programs
8
Auto Speed
2
3
Value
Percent/Setting
000 ó 255 0~100%
0~100%
000 ó 255
Only if playing a custom program
0~100%
000 ó 255
Only if playing a custom program
000 ó 255 0~100%
000 ó 010 No Function
011 ó 035 R: 100% G: Up
B: 0%
036 ó 060 R: Down G: 100% B: 0%
061 ó 085 R: 0%
G: 100% B: Up
086 ó 110 R: 0%
G: Down B: 100%
111 ó 135 R: Up
G: 0%
B: 100%
136 ó 160 R: 100% G: 0%
B: Down
161 ó 185 R: 100% G: Up
B: Up
186 ó 210 R: Down G: Down B: 100%
211 ó 215 White 1: 3,200 K
216 ó 220 White 2: 3,400 K
221 ó 225 White 3: 4,200 K
226 ó 230 White 4: 4,900 K
231 ó 235 White 5: 5,600 K
236 ó 240 White 6: 5,900 K
241 ó 245 White 7: 6,500 K
246 ó 250 White 8: 7,200 K
251 ó 255 White 9: 8,500 K
000 ó 010 No Function
011 ó 255 0~20 Hz
000 ó 020 No Function
021 ó 030 Auto 1
031 ó 040 Auto 2
041 ó 050 Auto 3
051 ó 060 Auto 4
061 ó 070 Auto 5
071 ó 080 Auto 6
081 ó 090 Auto 7
091 ó 100 Auto 8
101 ó 110 Auto 9
111 ó 120 Auto 10
121 ó 130 Custom 1
131 ó 140 Custom 2
141 ó 150 Custom 3
151 ó 160 Custom 4
161 ó 170 Custom 5
171 ó 180 Custom 6
181 ó 190 Custom 7
191 ó 200 Custom 8
201 ó 210 Custom 9
211 ó 220 Custom 10
221 ó 255 No function
000 ó 255 Only if playing an auto program
Page 6 of 8
COLORdash™ Par-Tri QRG
STAGE 1
(Cont.)
Channel Function
9
ARC1
Channel Function
1
2
3
ARC1 + D
ID Addressing
Red
Green
Blue
Channel Function
1
2
3
4
Dimmer
Red
Green
Blue
Value
000 ó 009
010 ó 019
020 ó 029
030 ó 039
040 ó 049
050 ó 059
060 ó 069
070 ó 079
080 ó 089
090 ó 099
100 ó 109
110 ó 119
120 ó 129
130 ó 139
140 ó 149
150 ó 159
160 ó 169
170 ó 179
180 ó 189
190 ó 199
200 ó 209
210
211
Value
Setting Value Setting Value Setting
All IDs
ID 1
ID 2
ID 3
ID 4
ID 5
ID 6
ID 7
ID 8
ID 9
ID 10
ID 11
ID 12
ID 13
ID 14
ID 15
ID 16
ID 17
ID 18
ID 19
ID 20
ID 21
ID 22
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
Percent/Setting
000 ó 255 0~100%
000 ó 255 0~100%
000 ó 255 0~100%
Value
000 ó 255
000 ó 255
000 ó 255
000 ó 255
Page 7 of 8
Percent/Setting
0~100%
0~100%
0~100%
0~100%
ID 23
ID 24
ID 25
ID 26
ID 27
ID 28
ID 29
ID 30
ID 31
ID 32
ID 33
ID 34
ID 35
ID 36
ID 37
ID 38
ID 39
ID 40
ID 41
ID 42
ID 43
ID 44
ID 45
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
ID 46
ID 47
ID 48
ID 49
ID 50
ID 51
ID 52
ID 53
ID 54
ID 55
ID 56
ID 57
ID 58
ID 59
ID 60
ID 61
ID 62
ID 63
ID 64
ID 65
ID 66
COLORdash™ Par-Tri QRG
Contact Us
World Headquarters
United Kingdom and Ireland
CHAUVET®
CHAUVET® Europe Ltd.
General Information
Address:
Voice:
Fax:
Toll free:
5200 NW 108th Avenue
Sunrise, FL 33351
(954) 929-1115
(954) 929-5560
(800) 762-1084
Technical Support
Voice:
Fax:
Email:
General Information
Address:
Unit 1C
Brookhill Road Industrial Estate
Pinxton, Nottingham, UK
NG16 6NT
Voice:
+44 (0)1773 511115
Fax:
+44 (0)1773 511110
Technical Support
(954) 929-1115 (Press 4)
(954) 756-8015
tech@chauvetlighting.com
World Wide Web
www.chauvetpro.com
Email:
uktech@chauvetlighting.com
World Wide Web
www.chauvetlighting.co.uk
Outside the U.S., United Kingdom, or Ireland, contact your distributor of
record. Follow their instructions to request support or to return a product.
Visit our website for contact details.
COLORdash™ Par-Tri QRG – Rev. 03
© Copyright 2012 CHAUVET®
All rights reserved.
Printed in the P. R. C.
Page 8 of 8
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising