Whirlpool 5KCG100BAC User manual

ARTISAN®-KOFFIEMOLEN
GIDS VOOR HET BESTE RESULTAAT
ARTISAN® BURR GRINDER
GUIDE TO EXPERT RESULTS
LE BROYEUR À CAFÉ ARTISAN®
GUIDE DU CONNAISSEUR
ARTISAN® KAFFEEMÜHLE
ANLEITUNG FÜR
PROFESSIONELLE ERGEBNISSE
MACINACAFFÈ ARTISAN®
GUIDA AI RISULTATI EXPERT
MOLINO DE CAFÉ ARTISAN®
GUÍA PARA CONSEGUIR
RESULTADOS PROFESIONALES
ARTISAN® BURR GRINDER
GUIDE FÖR BÄSTA RESULTAT
ARTISAN® KAFFEKVERN
OPPNÅ BEST MULIG RESULTATER
ARTISAN® BURR GRINDER
OPAS PARHAISIIN TULOKSIIN
ARTISAN® BURR GRINDER
VEJLEDNING FOR EKSPERT-RESULTATER
MOÍNHO DE CAFÉ ARTISAN®
GUIA PARA RESULTADOS PROFISSIONAIS
ARTISAN® BURR GRINDER
NOTKUNARLEIIÐBEININGAR
ARTISAN® BURR GRINDER
ΟΔΗΓΙΕΣ ΧΡΗΣΗΣ ΓΙΑ ΤΕΛΕΙΑ
ΑΠΟΤΕΛΕΣΜΑΤΑ
Model 5KCG100
Burr Grinder
Table of Contents
Burr Grinder Safety ....................................................................................... 3
Important Safeguards ................................................................................... 4
Electrical Requirements ................................................................................. 5
Model 5KCG100 ........................................................................................... 6
Burr Grinder Features .................................................................................... 7
English
Using the Artisan® Burr Grinder .................................................................... 8
Before First Use ...................................................................................... 8
Operating the Burr Grinder..................................................................... 8
Grind Setting Table ....................................................................................... 9
Adjusting the Cutting Burrs......................................................................... 10
Adjusting to Provide Coarser Grinds ..................................................... 10
Adjusting for Maximum Grind Fineness ................................................ 11
Burr Grinder Tips......................................................................................... 12
How the Grind Affects Flavor ...................................................................... 13
Care and Cleaning ...................................................................................... 14
Cleaning the Motor Housing and Hoppers ........................................... 14
Cleaning the Cutting Burrs ................................................................... 14
Adjusting the Cutting Burrs for Wear ................................................... 16
Replacing the Cutting Burrs .................................................................. 17
Troubleshooting Problems ........................................................................... 18
Household KitchenAid® Burr Grinder Warranty............................................ 19
Service Centers............................................................................................ 19
Customer Service ........................................................................................ 20
2
Burr Grinder Safety
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on
your appliance. Always read and obey all safety messages.
This symbol alerts you to potential hazards that can kill or hurt
you and others.
All safety messages will follow the safety alert symbol and either
the word “DANGER” or “WARNING.” These words mean:
DANGER
WARNING
You can be killed or seriously
injured if you don’t immediately
follow instructions.
You can be killed or seriously
injured if you don’t follow
instructions.
All safety messages will tell you what the potential hazard is, tell you how to
reduce the chance of injury, and tell you what can happen if the instructions
are not followed.
3
English
This is the safety alert symbol.
IMPORTANT SAFEGUARDS
English
When using electrical appliances, basic safety precautions should always be
followed, including the following:
1. Read all instructions.
2. To protect against the risk of electric shock, do not put the Burr Grinder
in water or other liquids.
3. Unplug the Burr Grinder from the outlet when not in use, before putting
on or taking off parts, and before cleaning.
4. Avoid contacting moving parts.
5. Do not operate any appliance with a damaged cord or plug, or after
the appliance malfunctions or is dropped or damaged in any manner. To
prevent hazards, return the appliance to the nearest authorized service
facility for examination, repair, or electrical or mechanical adjustment.
6. The use of attachments not recommended or sold by KitchenAid may
cause fire, electric shock, or injury.
7. Do not use outdoors.
8. Do not let cord hang over edge of table or counter, or touch hot surfaces.
9. Check the bean hopper for the presence of foreign objects before using.
10. Do not use appliance for other than intended household use.
11. The appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
12. Young children should be supervised to ensure that they do not play with
the appliance.
SAVE THESE INSTRUCTIONS
4
to the applicable collection point for
the recycling of electrical and
electronic equipment.
This appliance is marked according
to the European directive 2002/96/EC
on Waste Electrical and Electronic
Equipment (WEEE).
For more detailed information about
treatment, recovery and recycling
of this product, please contact your
local city office, your household
waste disposal service or the shop
where you purchased the product.
on the product, or
The symbol
on the documents accompanying the
product, indicates that this appliance
may not be treated as household
waste. Instead it shall be handed over
Electrical Requirements
Volts: 220–240 Volts A.C.
Hertz: 50/60 Hz
WARNING
NOTE: This Burr Grinder has a
grounded plug. To reduce the risk of
electrical shock, this plug will fit in
an outlet only one way. If the plug
does not fit in the outlet, contact a
qualified electrician. Do not modify
the plug in any way.
A short power-supply cord is
provided to reduce the risk resulting
from becoming entangled in
or tripping over a longer cord.
Extension cords are available and
may be used if care is exercised in
their use.
If a longer extension cord is used:
• The marked electrical rating of
the extension cord should be at
least as great as the electrical
rating of the appliance.
• The extension cord should be a
grounding-type cord.
Electrical Shock Hazard
Plug into a grounded outlet.
Do not remove ground prong.
Do not use an adapter.
Failure to follow these
instructions can result in
death, fire or electrical shock.
• The cord should be arranged
so it will not drape over the
countertop or tabletop where it
can be pulled on by children or
tripped over.
5
English
Disposal must be carried out in
accordance with local environmental
regulations for waste disposal.
By ensuring this product is disposed
of correctly, you will help prevent
potential negative consequences for
the environment and human health,
which could otherwise be caused
by inappropriate waste handling of
this product.
Model 5KCG100
English
Bean Hopper
Grind Level Ring
Motor Housing
Faceplate
Screws
Grind
Control
Dial
Bin Seal Plate
O/I
Switch
Coffee Bin
Bin Platform
Coffee Scoop
Burr Cleaning Brush
Model 5KCG100
Burr Grinder
6
Burr Grinder Features
Precision Stainless Steel
Cutting Burrs
Die-cast metal housing is stable,
durable, and easy to clean.
Large 5.72 cm diameter flat cutting
burrs provide long life and superb
grind consistency. Burrs can be
adjusted to compensate for wear, or
calibrated to meet stringent grindsize specifications for espresso and
French Press grinds.
Bean Hopper
198 g capacity bean hopper
unscrews from the motor housing
for simple cleaning. Press-fit hopper
lid makes for quick and easy filling.
Hopper and lid are dishwasher-safe
(top rack only).
Low-RPM Operation
A special DC motor and gear
reduction system slows the rotation
of the cutting burrs, minimizing the
frictional heating of the grinds and
preserving coffee flavor and aroma.
The low rpm operation also reduces
the static charge – and “cling” – of
coffee grinds.
Coffee Bin
Coffee bin is glass to minimize the
static “cling” of coffee grinds. Bin is
dishwasher-safe (top rack only).
Bin Platform
Platform pad seats the coffee bin
under the grinding spout.
Power Cord with Tie
Bin Seal Plate
Round cord has no grind-trapping
seams; the tie can be used to bundle
any excess.
Plate helps position the coffee
bin under the grinding spout and
prevents coffee grinds from escaping.
One-Piece Metal Base with
No-Slip Rubber Feet
Grind Control Dial
Large, easy-to-use dial selects
one of 15 grind levels in half-step
increments from 1 to 8.
Metal base provides a stable platform
for the grinder. Rubber feet dampen
noise and vibration, and help protect
the countertop.
Grind Level Ring
Burr Cleaning Brush
Metal ring displays grind levels 1
(coarse) through 8 (fine).
On/Off Switch
Dense bristles sweep grinds from the
cutting burrs quickly and easily.
Switch “I” to grind, “O” to stop.
Coffee Scoop
Faceplate Assembly & Screws
One level scoop holds 7 g of coffee,
just the right amount for a single cup
(30 ml) of espresso.
Assembly includes the grind
control dial and grind level ring.
Two faceplate screws attach the
faceplate assembly to the motor
housing. Loosen the screws and
remove the faceplate assembly to
access the burrs.
7
English
Motor Housing
Using the Artisan® Burr Grinder
3. Fill the bean hopper to the level
desired. At maximum, the hopper
holds 198 g of beans.
NOTE: This product is intended to
grind whole coffee beans only.
Before First Use
English
Before using the burr grinder, wipe
the motor housing and cord with a
clean damp cloth. Wash the bean
hopper, hopper lid, and coffee bin in
hot soapy water, then rinse and dry.
The bean hopper, hopper lid, and
coffee bin can also be washed in the
top rack of a dishwasher.
WARNING
Operating the Burr Grinder
1. Make certain the burr grinder
is unplugged. Attach the bean
hopper to the top of the motor
housing by turning the hopper
clockwise until snug.
Electrical Shock Hazard
Plug into a grounded outlet.
Do not remove ground prong.
Do not use an adapter.
Failure to follow these
instructions can result in
death, fire or electrical shock.
4. Place the hopper lid onto
the hopper.
5. Plug into a grounded outlet.
The tie provided on the power
cord can be used to bundle any
excess cord.
2. Slide the coffee bin onto the bin
platform; the bin seal plate on
the motor housing will compress
slightly to accommodate the bin.
Make certain the bin is centered in
the middle of the bin platform.
8
Using the Artisan® Burr Grinder
6. Select the grind by turning the
grind control dial to the desired
setting on the grind level ring.
See the grind setting table below
to match the grind level to your
brewing process. With use, you’ll
be able to refine the settings to
match your own tastes.
English
7. To grind coffee, flip the “O/I”
Switch to the “I” position.
8. When the desired amount of
coffee has been ground, flip
the “O/I” Switch to the “O”
position, remove the coffee
container, and scoop out the
ground coffee.
NOTE: Because partially ground
coffee beans may remain between
the burrs after the burr grinder is
turned off, selecting a finer grind
may be easier when the burr grinder
is running.
Grind Setting Table
Grind
For
Average Grind Size
8
Fine
Espresso
250 microns
5
Medium
Automatic Drip
750 microns
1
Coarse
French Press
1250 microns
Setting
produced by the burr grinder before adjustment
9
Adjusting the Cutting Burrs
3. Rotate the grind control gear
counter-clockwise 1 “click”
or detent at a time until the
“clicking” sound diminishes and
the gear offers little resistance to
being turned.
English
From the factory, the Artisan® Burr
Grinder will provide grinds suitable
for almost all types of brewing. If
you’re an espresso or French Press
aficionado, however, you may wish
to adjust the cutting burrs to provide
optimum performance for your style
of brewing. With adjustment, the
Artisan® Burr Grinder will easily meet
stringent grind-size specifications for
espresso (250 micron grind size) or
French Press brewing (1500 micron
grind size).
Adjusting to Provide
Coarser Grinds
When the grinder is adjusted to
provide coarser grinds, grind sizes
will increase throughout the grinding
range and the finest level may become
too coarse for espresso. (To re-calibrate
the grinder for maximum fineness, see
page 11.)
1. Turn the grind control dial to
level “1”.
2. Using a 4 mm wrench, remove
the screw located in the front of
the grind control dial by turning
it counter-clockwise. Once the
screw is free, remove the grind
control dial. The white grind
control gear should be visible
once the dial is removed.
4. Re-attach the grind control dial,
making certain the dial indicator
points to level “1”.
10
Adjusting the Cutting Burrs
5. Rotate the grind control gear
clockwise 1 “click” or detent at
a time until you hear the burrs
touching one another – when
they touch, the burrs will make
a distinct “rubbing” or grating
sound.
Adjusting for Maximum
Grind Fineness
English
Adjusting the grinder to provide
maximum fineness will slightly decrease
the grind sizes throughout the grinding
range. (To adjust the unit to provide
coarser grinds, see page 10.)
1. Empty the bean hopper, then
run the grinder a few seconds to
clear any remaining beans from
the machine.
2. Turn the grind control dial to
level “8”.
3. Using a 4 mm wrench, remove
the screw located in the front of
the grind control dial by turning it
counter-clockwise. Hold the grind
control dial so that it does not
rotate as the screw is removed.
Once the screw is free, remove the
grind control dial.
The white grind control gear should
be visible once the grind control dial
is removed.
6. When the burrs are touching,
turn the grind control gear
counter-clockwise 1 “click” or
detent. The grating or “rubbing”
sound will stop. Turn off the
grinder by flipping the “O/I”
Switch to the “O” position. The
grinder is now calibrated to
provide maximum fineness.
7. Re-attach the grind control dial,
making certain the dial indicator
points to grind level “8”.
NOTE: If the burr grinder produces
a grating or “rubbing” sound
during use, the burrs have been
improperly adjusted. Damage to the
burrs will result. Readjust the burrs
immediately.
4. Turn on the unit
by flipping the
“O/I” Switch to the “I” position.
11
Burr Grinder Tips
English
1. Select the correct
grind for the
brew process you
are using. 15
grind levels are
available in halfstep increments
from 1 to 8.
Level 8 produces a very fine grind
perfect for espresso, 41⁄2 to 6 are
medium grinds appropriate for
automatic drip coffee makers,
and 1 is a coarse grind suited to
French Press brewing. Experiment
– your tastes may be better served
by using a slightly finer or coarser
grind.
2. For standard drip-process coffee,
a good starting
point is to use
28 g of coffee
for every 500
ml of brew
water as
measured with
the carafe
(a carafe “cup” is about 127 ml).
Finer grinds usually require less
coffee, but using too fine a grind
will result in bitter flavor – see
“How the Grind Affects Flavor”
on page 13.
If you prefer substantially
weaker-than-average coffee, it’s
best to brew using a normal
amount of ground coffee and
then dilute the result with hot
water. Doing this will maximize
flavor and minimize bitterness.
3. Ground coffee loses flavor and
aroma very quickly. For the best
results, grind only as much as you
intend to immediately use.
4. To retain freshness, coffee beans
should be stored in an airtight
container and kept in a cool, dark
place. It is not recommended
that you store beans in the burr
grinder’s bean hopper for a
prolonged period.
5. Clean the coffee bin and cutting
burrs frequently.
6. Grinding flavored coffee beans
will impart an off-taste to any
other coffee that is ground in
the grinder. If you enjoy flavored
coffee, it’s best to add flavored
syrups or creamers to your coffee
after brewing or dedicate another
grinder for grinding flavored
beans only.
NOTE: The burrs will require more
frequent cleaning when grinding
flavored coffee beans. The burr
grinder is intended for grinding
whole coffee beans only. Do not
grind other food items.
12
The flavor of coffee depends on
a variety of factors, including
the quality, freshness, and roast
of the beans, the purity of the
brew water, the cleanliness of
the brewing equipment, and the
brewing temperature. The fineness
and consistency of the grind is also
critical.
Coffee that is ground
too fine for a particular
brewing process – using
a fine espresso grind in
a drip coffee maker, for
critical when making great espresso.
If the grounds are uniform, equal
amounts of soluble compounds
will be extracted from each. If the
grounds vary in size, some will be
over-extracted and some will be
under-extracted, leading to extremely
poor quality. It’s not surprising that
a precision grind is mandatory for
good espresso, which is brewed
with near-boiling water under 9
bars of pressure.
Coffee grind quality is directly
related to the type of grinder
example – will result in the
brew water over-extracting
the oils and aromatic
compounds in the
coffee, yielding a brew
that is extremely pungent
and bitter. Conversely, coffee that is
too coarsely ground for a particular
process will result in the underextraction of the oils and essences,
resulting in a very thin and weak
flavor. If the correct grind is used,
adding more coffee simply makes
a brew stronger without making it
excessively bitter.
The consistency of the grind is
also an important factor in the
flavor of coffee – and absolutely
used. High speed grinders
with small burr sets are
usually not able to produce
the fineness or consistency
required for the best
espresso. They also excessively
heat the beans while grinding,
resulting in lost flavor and aroma.
The Artisan® Burr Grinder uses a
pair of large, commercial-style cutting
burrs to grind coffee with precision.
Frictional heating is minimized with a
gear reduction system that slows burr
rotation, and uniformity is enhanced
with a helical-gear that transports
beans to the burrs at a controlled
rate. The result is a superb grind that
makes your coffee and espresso the
best it can be.
13
English
How the Grind Affects Flavor
Care and Cleaning
2. Using a flat-head screwdriver,
turn the two faceplate screws
counter-clockwise until the
faceplate assembly is free.
(The faceplate screws have
retaining clips that prevent them
from being removed from the
faceplate assembly.)
Cleaning the Motor Housing
and Hoppers
English
• Make sure the burr grinder is
switched to the “O” position and
unplugged before cleaning.
• Do not immerse the motor housing
in water.
• Never immerse the cutting burrs,
burr-shaft assembly, or face-plate
assembly in water. Keep them dry
at all times.
•Do not use abrasive cleansers or
scouring pads.
Wipe the motor housing and cord
with a clean damp cloth. Dry with
a soft cloth.
Wash the coffee bin, bean hopper,
and hopper lid in hot soapy water,
then rinse and dry. The bean hopper,
hopper lid, and coffee bin can also
be washed in the top rack of a
dishwasher.
3. Carefully slide the faceplate
assembly away from the motor
housing. A separate burr-shaft
assembly on the inside of the
motor housing will usually slide
out with the face plate assembly.
Place a hand under the burrshaft assembly to prevent it from
falling as the faceplate assembly is
removed. If the burr-shaft assembly
does not slide out with the faceplate assembly, grasp the center
shaft of the burr-shaft assembly
and remove it from the housing.
Cleaning the Cutting Burrs
If the grinder is used frequently, the
cutting burrs need to be cleaned
every few weeks for best
performance. Cleaning enables the
burrs to achieve the finest, most
consistent grinds possible – which is
especially important when grinding
coffee for espresso.
Foreign objects – like pebbles or
twigs – sometimes find their way into
whole bean coffee. These objects
may cause the grinder to jam. If this
happens, follow the burr-cleaning
procedure to remove the foreign
material.
1. Make sure the grinder is
switched to the “O” position and
unplugged. Remove the coffee bin
and bean hopper from the grinder.
Burr-Shaft Assembly
Faceplate Assembly
14
Care and Cleaning
5. After cleaning, tilt the burr grinder
backward so the front of the
motor housing faces upward.
English
4. Using the burr-cleaning brush,
clean the burr mounted on the
burr-shaft assembly and the
burr mounted within the
motor housing.
6. With the corkscrew-shaped
auger shaft facing into the motor
housing, insert the burr-shaft
assembly into the burr grinder.
Keep the burr-shaft assembly
level, so the tip of the auger shaft
will line up with the small socket
in the motor housing.
NOTE: Never wash the burrs or
burr-shaft assembly in water. Keep
them dry at all times.
15
Care and Cleaning
7. Once the burr-shaft assembly is
in the motor housing, rotate
the assembly until it falls into
place. When correctly positioned,
the burr-shaft assembly cannot
be rotated.
9. After the faceplate screws have
been finger-tightened, use a
flat-head screwdriver to tighten
them until snug.
10. Place the burr grinder upright. It is
now ready for use.
English
Adjusting The Cutting Burrs
For Wear
The cutting burrs are made of
high-quality stainless steel for
exceptional longevity. After
prolonged use, however, the
burrs might require adjustment to
compensate for wear. If your grinds
– especially espresso – are not as fine
as they used to be, an adjustment
probably needs to be made.
Please see “Adjusting the Cutting
Burrs” on page 11 for information
on adjusting the burrs to provide
maximum grind fineness.
8. Place the faceplate assembly onto
the motor housing. Make sure the
numbers on the grind level ring
are positioned across the top of
the assembly. Using your fingers,
tighten the faceplate screws by
turning them clockwise. Alternate
tightening the screws, keeping
them even – do not completely
tighten one screw before
tightening the other.
16
Care and Cleaning
3. Remove the burr from the motor
housing by turning the two
burr-mounting screws
counter-clockwise until free.
Replacing the Cutting Burrs
English
If the cutting burrs are damaged,
or have reached the end of their life
(usually after grinding 270–360 kg of
coffee), they can be replaced easily.
Refer to “Service Centers” on page 19
to order a set of replacement burrs.
To Replace the Burrs:
1. Remove the faceplate and burrshaft assemblies. For instructions,
see “Cleaning the Cutting Burrs”
steps 1, 2, and 3 on page 14.
2. With a screwdriver, remove the
burr from the burr-shaft assembly
by turning the two burr-mounting
screws counter-clockwise until
free.
4. Attach the replacement burrs to
the burr-shaft assembly and motor
housing using the burr-mounting
screws. Make certain the cutting
surfaces of the burrs face
outward, and the burr-mounting
screws are tight.
5. Insert the burr-shaft assembly
into the motor housing and
attach the faceplate assembly.
For instructions, see “Cleaning
the Cutting Burrs” steps 5–10 on
pages 15 and 16.
17
Troubleshooting Problems
English
If the grinder does not run when
switched on:
Check to see if the burr grinder is
plugged into a grounded outlet. If
it is, unplug the grinder, then plug
it back in again. If the burr grinder
still does not work, check the fuse or
circuit breaker on the electrical circuit
the grinder is connected to and make
sure the circuit is closed. If the grinder
does not run after taking these steps,
a foreign object may be jamming
the cutting burrs. See “Cleaning the
Cutting Burrs” on page 14 for more
information.
If the grinder runs when
switched on, but coffee does
not grind:
The cutting burrs require cleaning or
are worn. See “Cleaning the Cutting
Burrs” on page 14 or “Replacing the
Cutting Burrs” on page 17 for more
information.
If the grinder is operating
normally, but stops abruptly:
Immediately turn off the burr
grinder. A foreign object, such as a
pebble or twig, may have jammed
the cutting burrs. See “Cleaning the
Cutting Burrs” on page 14 for more
information.
If the grind is too coarse, or
the grinder isn’t producing an
acceptable range of grinds:
See “Adjusting the Cutting Burrs”
on page 11 or “Replacing the
Cutting Burrs” on page 17 for more
information.
If the problem cannot be fixed
with the steps above, see the
KitchenAid® Burr Grinder Warranty
on page 19.*
* Do not return the Burr Grinder to the retailer
– they do not provide service.
18
Length of
Warranty:
KitchenAid
Will Pay For:
KitchenAid
Will Not Pay For:
Europe, Australia
and New Zealand:
Two Year Full Warranty
from date of purchase.
Replacement parts
and repair labor costs
to correct defects
in materials or
workmanship. Service
must be provided by an
Authorized KitchenAid
Service Center
A. Repairs when Burr
Grinder is used
for operations
other than normal
household food
preparation.
Other:
One Year Full Warranty
from date of purchase.
B. Damage resulting
from accident,
alterations,
misuse, abuse,
or installation/
operation not in
accordance with
local electrical
codes.
KITCHENAID DOES NOT ASSUME ANY RESPONSIBILITY FOR
INDIRECT DAMAGES.
Service Centers
All service should be handled locally
by an authorized KitchenAid Service
Center. Contact the dealer from
whom the unit was purchased to
obtain the name of the nearest
authorized KitchenAid service facility.
In the U.K.:
Call 0845 6011 287
In Ireland:
M.X. ELECTRIC
Service Department
25 Alymer Crescent
Kilcock, CO. KILDARE
Call: 1 6792398/87 2581574
Fax: 1 6284368
In Australia:
Call 1800 990 990
In New Zealand:
Call 0800 881 200
19
English
Household KitchenAid®
Burr Grinder Warranty
Customer Service
For U.K. & Northern Ireland:
Freephone helpline
number on 0800 988 1266
(calls from mobiles are charged
at your standard network rate)
English
For Southern Ireland:
Helpline number on
+44 (0) 20 8616 5148
Address:
KitchenAid Europa, Inc.
PO BOX 19
B-2018 ANTWERP 11
BELGIUM
www.KitchenAid.co.uk
www.KitchenAid.com
®Registered Trademark of KitchenAid, U.S.A.
™Trademark of KitchenAid, U.S.A.
© 2008. All rights reserved.
Specifications subject to change without notice.
6297dZw508
20

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project