Desa SPC-55 Construction Heaters Owner's Manual

Add to My manuals
14 Pages

advertisement

Desa SPC-55 Construction Heaters Owner's Manual | Manualzz

OWNERS MANUAL

FORCED AIR PROPANE CONSTRUCTION HEATERS

Models

30-FAS/SPC-30, 55-F/SPC-55, 85-FAC/SPC-85, 125-F/SPC-125

STOP

QUESTIONS?

MISSING / DAMAGED PARTS

Please do not return this product to the store.

If a part is damaged or missing, simply e-mail us at [email protected], or visit our website at http://allpro-heaters.com, or call our Customer

Service Department at (888) 619-7060.

We will be happy to assist you!

You can register your heater on line at http://allpro-heaters.com/warranty.

TABLE OF CONTENTS

HEATER SPECIFICATIONS................................................................................................................ 2

WARNINGS .................................................................................................................................. 2

OPERATING PRECAUTIONS ............................................................................................................. 3

SAFETY PRECAUTIONS .................................................................................................................... 3

ODOR FADE WARNING ...................................................................................................................... 4

OPERATING INSTRUCTIONS ............................................................................................................ 5

SERVICING ......................................................................................................................................... 5

SIZE AND CAPACITY OF PROPANE CYLINDERS REQUIRED ........................................................ 6

WIRING DIAGRAMS. ........................................................................................................................... 7

30-FAS / SPC-30 - PARTS ................................................................................................................... 8

55-F / SPC-55 - PARTS ....................................................................................................................... 9

85-FAC / SPC-85 - PARTS ................................................................................................................ 10

125-F / SPC-125 - PARTS .................................................................................................................. 11

WARRANTY ....................................................................................................................................... 12

SERVICE CENTERS ........................................................................................................................ 12

INSTRUCTIONS FOR ORDING PARTS ........................................................................................... 12

WARRANTY REGISTRATION ........................................................................................................... 13

RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE

© 2002 Scheu Products Company

Models

30-FAS/SPC-30, 55-F/SPC-55, 85-FAC/SPC-85, 125-F/SPC-125

Type of Gas:

Gas Supply Pressure to regulator regulator out

Electrical Input:

Ignition:

Primary Flame Control:

High Temperature Control:

Model:

Rating:

Fuel Consumption:

Fuel Orifice Port No.:

Fuel Orifice Port Size:

Heated Air Output:

Average Air Temp. Rise:

30-FAS / SPC-30

30,000 Btu/hr

(8.8 KW)

1.4 lbs/hr

(.64 kg/hr)

1

0.0730"

(1.854mm)

140cfm

(3.96 cmm)

250°F (139°C)

HEATER SPECIFICATIONS

For use with Propane Only

Maximum: Bottle Pressure Minimum: 5 psig (34.5 kPa)

28" W.C. (6.97 kPa) (11" W.C. (2.74 kPa) for 30-FAS/SPC-30

115V, 60 Hz, 1Ø, 3a Minimum Operating Voltage: 100V

Direct Spark (manually operated for 30-FAS/SPC-30 heaters)

Thermocouple Operated Gas Valve

240°F (116°C) Minimum Ambient Temp. Rating 0°F (-17.8°C)

55-F/SPC-55 85-FAC / SPC-85 125-F / SPC-125

30,000-55,000 50,000 – 85,000 75,000 – 125,000

Btu/hr Btu/hr Btu/hr

(8.8-16.1 kw) (14.6 – 25.0 kW) (21.9 – 36.6 kW)

1.4-2.5 lbs/hr 2.3 – 3.9 lbs/hr 3.5 – 5.8 lbs/hr

(.64-1.1 kg/hr) (1.04 – 1.77 kg/hr) (1.59 – 2.63 kg/hr)

18

0.0196"

(0.50mm)

300cfm

(8.49cmm)

200°F

18 18

0.0240” 0.0295"

(0.6024mm) (0.75mm)

350 cfm 350 cfm

(9.91 cmm) (9.91 cmm)

200°F (111°C) 400°F (232°C)

WARNINGS

YOUR SAFETY IS IMPORTANT TO YOU AND TO OTHERS, SO PLEASE

READ THESE INSTRUCTIONS BEFORE YOU OPERATE THIS HEATER.

GENERAL HAZARD WARNING:

FAILURE TO COMPLY WITH THE PRECAUTIONS AND INSTRUCTIONS PROVIDED WITH THIS HEATER, CAN RESULT IN

DEATH, SERIOUS BODILY INJURY AND PROPERTY LOSS OR DAMAGE FROM HAZARDS OF FIRE, EXPLOSION, BURN,

ASPHYXIATION, CARBON MONOXIDE POISONING, AND/OR ELECTRICAL SHOCK.

ONLY PERSONS WHO CAN UNDERSTAND AND FOLLOW THE INSTRUCTIONS SHOULD USE OR SERVICE THIS HEATER.

IF YOU NEED ASSISTANCE OR HEATER INFORMATION SUCH AS AN INSTRUCTIONS MANUAL, LABELS, ETC. CONTACT

THE MANUFACTURER.

WARNING: NOT FOR HOME OR RECREATIONAL VEHICLE USE

WARNING: FIRE, BURN, INHALATION, AND EXPLOSION HAZARD. KEEP SOLID COMBUSTIBLES, SUCH AS

BUILDING MATERIALS, PAPER OR CARDBOARD, A SAFE DISTANCE AWAY FROM THE HEATER AS RECOMMENDED

BY THE INSTRUCTIONS NEVER USE THE HEATER IN SPACES WHICH DO OR MAY CONTAIN VOLATILE OR AIRBORNE

COMBUSTIBLES, OR PRODUCTS SUCH AS GASOLINE, SOLVENTS, PAINT THINNER, DUST PARTICLES OR UNKNOWN

CHEMICALS.

Scheu Products Company, Incorporated

Mail: P.O. Box 250, Upland, CA 91785

Plant: 8855 Baker Ave., Rancho Cucamonga, CA 91730

Telephone: 800-325-7057 www.scheuco.com

[email protected]

ANSI Z83.7/CGA 2.14-2000

8784

September 2003

Page -2-

Models

30-FAS/SPC-30, 55-F/SPC-55, 85-FAC/SPC-85, 125-F/SPC-125

OPERATING PRECAUTIONS

This is a propane, direct-fired, forced air heater. It's intended use is primarily temporary heating of buildings under construction, alteration or repair.

Propane is heavier than air. If propane leaks from a connection or fitting, it sinks to the floor, collecting there with the surrounding air, forming a potentially explosive mixture.

Obviously, propane leaks should be avoided, so set up the propane supply with utmost care. Read enclosed Odor Fade and Propane Sheet for additional information about detecting propane leaks. Leak check new connections or reconnections with a soap and water solution and follow all connection instructions herein. Also, ask your propane dealer for advice on the propane application and supply installation and ask him to check it if there are any questions.

This heater was designed and certified for use as a construction heater in accordance with ANSI Standard Z83.7/

CGA 2.14-2000. Check with your local fire safety authority if you have any questions about your applications. Other standards govern the use of fuel gases and heat producing products in specific applications. Your local authority can advise you about these.

Direct-Fired means that all of the combustion products enter the heated space. Even though this heater operates very close to

100 percent combustion efficiency, it still produces small amounts of carbon monoxide. Carbon monoxide (called CO) is toxic. We can tolerate small amounts but not a lot. CO can build up in a heated space and failure to provide adequate ventilation could result in death. The symptoms of inadequate ventilation are: headache burning eyes and nose dizziness nausea dry mouth or sore throat

So, be sure to follow advice about ventilation in these operating instructions.

Forced Air means that a blower or fan pushes the air through the heater. Proper combustion depends upon this air flow; therefore, the heater must not be revised, modified or operated with parts removed or missing. Likewise, safety systems must not be circumvented or modified in order to operate the heater.

When the heater is to be operated in the presence of other people the user is responsible for properly acquainting those present with the safety precautions and instructions, and of the hazards involved.

SAFETY PRECAUTIONS

1. Check the heater thoroughly for damage. DO NOT operate a damaged heater.

2. DO NOT modify the heater or operate a heater which has been modified from its original condition.

3. Use only propane gas.

4. Use only VAPOR WITHDRAWAL propane supply. If there is any question about vapor withdrawal, ask your propane dealer.

5. Mount the propane cylinders vertically (shutoff valve up).

Secure them from falling or being knocked over and protect them from damage.

6. Locate propane containers at least (USA) 7 ft. (2.13m),

(Canada) 10 ft. (3m) from the heater and do not direct exhaust toward containers.

7. IMPORTANT Use only the hose and regulator assembly provided with the heater. Match the color stripe on the hangtag attached to the hose assembly with the color on the label located near the propane inlet fitting on the heater.

Inspect hose assembly before each use of the heater. If there is excessive abrasion or wear, or hose is cut, replace with hose assembly listed on parts list before using heater.

8. For indoor use only. Area must be well ventilated. Figure 1.

(also see "Operating Precautions").

9. If at any time gas odor is detected, IMMEDIATELY

DISCONTINUE operation until the source of gas has been located and corrected. Read enclosed Odor fade and

Propane Sheet for additional information about detecting propane leaks.

10. Install the heater such that it is not directly exposed to water spray, rain and/or dripping water.

11. Maintain minimum clearance from normal combustible material (like paper). Figure 2.

12. Due to the high surface and exhaust temperatures, adults and children must observe clearances to avoid burns or clothing ignition.

13. Operate only on a stable, level surface.

14. Do not use with duct work. Do not restrict inlet or exit.

15. Use only the electrical power specified. The electrical connection and grounding must comply with National

Electrical Code - ANSI/NFPA 70 (USA) and CSA C22.1

Canadian Electrical Code, Part 1 (Canada).

16. Use only a properly grounded 3-prong receptacle or extension cord.

17. Do not move, handle or service while hot or burning.

18. Use only in accordance with local codes or, in the absence of local codes, with the Standard for the Storage and

Handling of Liquefied Petroleum Gases ANSI/NFPA 58 and

CSA B149.1, Natural Gas and Propane Installation Code.

Figure 1

VENTILATION: Minimum openings required

Opening Opening

Heater near floor near ceiling

Infrared ............................................................... 1 ft 2

.....................

1 ft 2

Convection (25-VC) ........................................... 1 ft 2

.....................

1 ft 2

Convection (All others) ...................................... 2 ft 2

.....................

2 ft 2

Radiant ................................................................ 2 ft 2

.....................

2 ft 2

Forced air (30, 55) ............................................. 1 ft 2

.....................

1 ft 2

Forced air (85, 125, 170F) ................................. 2 ft 2

.....................

2 ft 2

Forced air (3500-FACV, SPC-350) .................... 3 ft 2

.....................

3 ft 2

Forced air (7000-FACV) .................................... 4 ft 2

.....................

4 ft 2

Figure 2

MINIMUM CLEARANCE: From normal combustible material

Radiant Forced Air

Clearance Infrared Convection Forced Air 7000-FACV

From floor ........................................................... 0 ft .............. 0 ft

From outlet .......................................................... 6 ft .............. 10 ft

From sides ................ 3 ft ............ 4 ft ............... 2 ft .............. 3 ft

From top ....................................... 6 ft ............... 3 ft .............. 5 ft

From front ................. 6 ft

From rear .................. 2 ft

Locate 10 ft. from canvas or plastic tarpaulins or similar coverings and secure them to prevent flapping or movement due to wind action.

Page -3-

Models

30-FAS/SPC-30, 55-F/SPC-55, 85-FAC/SPC-85, 125-F/SPC-125

ODOR FADE WARNING

WARNING

Asphyxiation Hazard

• Do not use this heater for heating human living quarters.

• Do not use in unventilated areas.

• The flow of combustion and ventilation air must not be obstructed.

• Proper ventilation air must be provided to support the combustion air requirements of the heater being used.

• Refer to the specification section of the heater’s manual, heater dataplate, or contact the Scheu Products Company to determine combustion air ventilation requirements of the heater.

• Lack of proper ventilation air will lead to improper combustion.

• Improper combustion can lead to carbon monoxide poisoning leading to serious injury or death. Symptom of carbon monoxide poisoning can include headaches dizziness and difficulty in breathing.

FUEL GAS ODOR

LP gas and natural gas have man-made odorants added specifically for detection of fuel gas leaks.

If a gas leak occurs you should be able to smell the fuel gas. Since Propane (LP) is heavier than air you should smell for the gas odor low to the floor. ANY GAS ODOR IS YOUR SIGNAL TO GO INTO IMMEDIATE ACTION!

• Do not take any action that could ignite the fuel gas. Do not operate any electrical switches. Do not pull any power supply or extension cords. Do not light matches or any other source of flame. Do not use your telephone.

• Get everyone out of the building and away from the area immediately.

• Close all propane (LP) gas tank or cylinder fuel supply valves, or the main fuel supply valve located at the meter if you use natural gas.

• Propane (LP) gas is heavier than air and may settle in low areas. When you have reason to suspect a propane leak, keep out of all low areas.

• Use your neighbor’s phone and call your fuel gas supplier and your fire department. Do not re-enter the building or area.

• Stay out of the building and away from the area until declared safe by the firefighters and your fuel gas supplier.

• FINALLY, let the fuel gas service person and the firefighters check for escaped gas. Have them air out the building and area before you return. Properly trained service people must repair any leaks, check for further leakages, and then relight the appliance for you.

ODOR FADING - NO ODOR DETECTED

• Some people cannot smell well. Some people cannot smell the odor of the man-made chemical added to propane (LP) or natural gas. You must determine if you can smell the odorant in these fuel gases.

• Learn to recognize the odor of propane (LP) gas and natural gas. Local propane (LP) gas dealers will be more than happy to give you a scratch and sniff pamphlet. Use it to become familiar with the fuel gas odor.

• Smoking can decrease your ability to smell. Being around an odor for a period of time can affect your sensitivity to that particular odor. Odors present in animal confinement buildings can mask fuel gas odor.

ATTENTION - CRITICAL POINTS TO REMEMBER!

• Propane (LP) gas has a distinctive odor. Learn to recognize these odors. (Reference Fuel Gas Odor and Odor Fading sections above.

• Even If you are not property trained in the service and repair of the heater, ALWAYS be consciously aware of the odors of propane (LP) gas and natural gas.

• If you have not been properly trained in repair and service of propane (LP) gas then do not attempt to light heater, perform service or repairs, or make any adjustments to the heater on the propane (LP) gas fuel system.

The odorant in propane (LP) gas and natural gas is colorless and the intensity of its odor can fade under some circumstances.

• If there is an underground leak, the movement of gas through the soil can filter the odorant.

• Propane (LP) gas odor may differ in intensity at different levels. Since Propane (LP) gas is heavier than air, there may be more odor at lower levels.

• Always be sensitive to the slightest gas odor. If you continue to detect any gas odor, no matter how small, treat it as a serious leak. Immediately go into action as discussed previously.

• A periodic sniff test around the heater or at the heater’s joints; i.e. hose, connections, etc., is a good safety practice under any conditions. If you smell even a small amount of gas, CONTACT YOUR FUEL GAS SUPPLIER IMMEDIATELY.

DO NOT WAIT!

Page -4-

Models

30-FAS/SPC-30, 55-F/SPC-55, 85-FAC/SPC-85, 125-F/SPC-125

OPERATING INSTRUCTIONS

PREPARING FOR OPERATION

1. Check the heater for possible shipping damage. If any is found, immediately notify the factory.

2. Follow all of the "Precautions".

3. Connect the POL fitting of hose and regulator assembly to the propane cylinder by rotating the POL nut counterclockwise into the propane cylinder's valve outlet and securely tighten with a wrench.

4. Connect the hose to the heater by rotating the hose fitting clockwise.

5. Securely tighten all gas connections.

6. Open the cylinder's gas valve and check all gas connections with a soap and water solution. DO NOT USE A FLAME.

7. Connect power cord to well-grounded 115V, 60 Hz, 1Ø source of power.

8. When using an extension cord, make certain that it is a 3wire (grounded) cord of proper wire size.

START

1. Before heater ignition, always allow heater fan (blower) to run for 20 seconds to purge fuel.

2. Slowly open the main valve at propane cylinder.

3. Depress the fuel valve button to light the 55-F/SPC-55, 85-

FAC/SPC-85 and 125-F/SPC-125 models. On the 30-FAS/

SPC-30 also push the ignition button until the heater lights.

4. After the heater lights, keep the gas valve button depressed for 15 seconds then release and the heater will continue to operate.

5. Adjust burn rate with ball valve to desired setting (55-F/SPC-

55, 85-FAC/SPC-85 and 125-F/SPC-125 only).

STOP

1. Securely close valve on the propane cylinder.

2. Continue to operate heater until all fuel in the hose has burned.

3. Unplug the power cord.

RESTART AFTER SAFETY SHUTDOWN

1. Securely close valve at propane cylinder. Unplug heater.

2. Wait 5 minutes.

3. Restart following "Start" procedure.

MAINTENANCE AND STORAGE

1. The heater should be inspected before each use, and at least annually by a qualified person.

2. Before each use, check the soft "O" ring seat at the bullnose of the POL fitting. If the "O" ring is cut, scuffed, or otherwise damaged, replace it with part number 6681.

3. Turn off the gas at the LP-gas supply cylinder(s) when the heater is not in use.

4. When the heater is to be stored indoors, the connection between the LP-gas supply cylinder(s) and the heater must be disconnected and the cylinder(s) removed from the heater and stored out of doors and in accordance with

Chapter 5 of the standard for Storage and Handling of

Liquefied Petroleum Gases ANSI/NFPA 58 and CSA B149.1,

Natural Gas and Propane Installation Code.

SERVICING

A hazardous condition may result if a heater is used that has been modified or is not functioning properly. When the heater is working properly:

* The flame is contained within the heater.

* The flame is essentially blue with perhaps some yellow tipping.

* There is no strong disagreeable odor, eye burning or other physical discomfort.

* There is no smoke or soot internal or external to the heater.

* There are no unplanned or unexplained shut downs of the heater.

The parts lists and wiring diagram show the heater as it was constructed. Do not use a heater which is different from that shown. In this regard, use only the hose, regulator and cylinder connection fitting (called a POL fitting) supplied with the heater.

IMPORTANT Match the color stripe on the hangtag attached to the hose assembly with the color on the label located near the propane inlet fitting on the heater.

Do not use alternates. For this heater, the regulator must be set as shown in

"specifications". If there is any uncertainty about the regulator setting, have it checked.

A heater which is not working right must be repaired, but only by a trained, experienced service person. To find the service center closest to you, visit our website at www.scheuco.com.or call

(888) 619-7060.

You may also obtain in-warranty or out-of-warranty service by taking the product to your local service center.

In-warranty products will be repaired with no charge for either parts or labor. Please include a brief statement indicating date, place of purchase, the nature of the problem and proof of purchase.

Out-of-warranty products will be repaired with a charge for parts and labor.

Page -5-

Models

30-FAS/SPC-30, 55-F/SPC-55, 85-FAC/SPC-85, 125-F/SPC-125

SIZE AND CAPACITY OF PROPANE CYLINDERS REQUIRED

The charts below show the approximate size of the cylinder required for these heaters. To use the chart:

1.

Select the lowest air temperature expected (at the bottom of the chart).

2.

Move straight up to time of operation desired (left side of chart).

3.

Read the cylinder size required.

All heaters should have: full cylinders good air circulation no frost on cylinders

30,000 BTU/HR (11.8 kW) 55,000 BTU/HR (16.1 kW)

AIR TEMPERATURE - o F ( o C)

85,000 BTU/HR (33.4 kW)

AIR TEMPERATURE - o F ( o C)

125,000 BTU/HR (49.1 kW)

AIR TEMPERATURE - o F ( o C)

Use liquid withdrawal and a vaporizer

AIR TEMPERATURE - o F ( o C)

Page -6-

Models

30-FAS/SPC-30, 55-F/SPC-55, 85-FAC/SPC-85, 125-F/SPC-125

WIRING DIAGRAMS

30-FAS/SPC-30

CONNECTION DIAGRAM

W

THERMOCOUPLE

RELAY

B

IGNITION BUTTON

B

B

W

ELECTRODE

B

MOTOR

B

IGNITOR

L 1

B** or O**

N 2 G

R* or Y*

HIGH-LIMIT SWITCH

R* or Y*

B

LINE CORD

G

W

W

B

115V

60HZ

MOTOR

SCHEMATIC DIAGRAM

IGNITION BUTTON

HIGH-LIMIT SWITCH

THERMOCOUPLE

ELECTRODE

L 1

N

IGNITOR

2

RELAY

GAS

VALVE

CONNECTION DIAGRAM

W

THERMOCOUPLE

RELAY

B

W

B

B MOTOR

B

SPARK PLUG

B

IGNITOR

I1

B** or O**

I2

R* or Y*

R* or Y*

HIGH-LIMIT SWITCH 115V

60HZ

LINE CORD

G

W

B

MOTOR

SCHEMATIC DIAGRAM

I1

IGNITOR

I2

SPARK PLUG

HIGH-LIMIT SWITCH

THERMOCOUPLE

RELAY

GAS

VALVE

B

BL

W

G

COLOR CODE

BLACK

BLUE

WHITE

GREEN

R

Y

O

RED

YEL

ORG

LEGEND

FEMALE CONN.

RING CONN.

TERMINAL BOARD

NOTE: IF ANY ORIGINAL WIRING AS SUPPLIED WITH THE HEATER MUST BE REPLACED, IT MUS BE REPLACED WITH

TYPE AWG 105° C WIRE OR ITS EQUIVALENT EXCEPT AS INDICATED (*TYPE SF 2-200, **SGI-250°C)

WIRING CHART

30-FAS/SPC-30

Part No Color Length From To

1370

1441

1442

1806

1806

1040

1040

1385

1110

1370

Black

Black

White

Green

Red

Red

Black

White

Orange

Orange

6" (152mm)

6" (152mm)

10" (253mm)

4 1/2" (114mm)

7" (177mm)

7" (177mm)

5" (127mm)

5" (127mm)

6" (152mm)

6" (152mm)

Ignition Switch

Ignition Switch

N (Ignitor)

2 (Ignitor)

High Limit

High Limit

Relay

Relay

Relay

Relay

T.B. Line

L (Ignitor)

T.B. Return

Ground

T.B. Middle

T.B. Line

T.B. Middle

T.B. Return

Thermocouple Junction Block

Thermocouple Junction Block

1040

1070

1041

1044

1044

1441

1442

1806

1806

Black

Orange

White

Yellow

Yellow

Black

White

Orange

Orange

SPC-40, 85-FAC/SPC-85, 125-FAC/SPC-125

Part No Color Length From To

6" (152mm)

11" (279mm)

4 1/2" (114mm)

16" (406mm)

16" (406mm)

5" ((127mm)

5" (127mm)

6" (152mm)

6" (152mm)

I1 (Ignitor)

1 (Ignitor

I2(Ignitor)

High Limit

High Limit

Relay

Relay

Relay

Relay

T.B. Line

Spark Plug

T.B. Return

T.B. Middle

T.B. Line

T.B. Middle

T.B. Return

Thermocouple Junction Block

Thermocouple Junction Block

Page -7-

30-FAS / SPC-30 - PARTS

Item 30-FAS SPC-30 Description

1 3455 3486 Front Cover, Housing

2 3392 3367 Housing, 30-FAS

3 3393 3369 Rear Cover, Housing

4 6825 6825 Foil AL 2-3 Adhesive Back

*

6 6803 6803 Thermocouple, 15" w/Junction Block

7 1368 1368 Motor Assembly

8 3371 3371 Motor Mounting Plate

9 3372 3372 Blower Exit Bracket

10 1440 1440 High Limit Control Assembly

11 6730 6730 Blower Inlet Ring

12 1455 1455 Blower Housing

13 6732 6732 Blower 3.75 in. ccw 1/4" HUB

16 1345 1345 Flame Holder Assembly

17 7285 7285 Thermoelectric Valve

18 6138 6138 Fitting, Male Elbow

19 6144 6144 Fitting, Male Connector

20 6142 6142 Fitting, Elbow

21 6133 6133 Fitting, Coupling

22 1640 1640 Fuel Tube Assembly

24 1377 1377 Electrode Assembly

27 1036 1036 Power Cord Assembly

30 6223 6223 Strain Relief Bushing

31 6641 6641 Terminal Board

32 1811 1811 Relay Assembly

33 3480 3480 Base

Qty.

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

Item 30-FAS SPC-30 Description

34 3478 3478 Burner Box

35 3517 3517 Blower/Burner Bracket

* 6070 6070 Loop Clamp, 5/16"

37 7095 7095 Handle

38 6250 6250 Spark Ignitor, 115V

*

* 6811 6811 Label, Model, Operating Instructions

* 7008 7008 Label, Wiring

42 7152 7152 Hose Assembly, LP 1/4"

43 6433 6433 POL Excess Flow

44 6255 6255 Regulator 11" W.C.

45 7094 7094 Clip, Handle

46 6712 6712 Label, Hangtag, LP Hose

47 6171 6171 Switch, Push Button

48 3667 3667 Relay Mounting Bracket, 30-FAS

* 7491 7491 Label, Fuel/Ignition

* 6373 6373 Label, Fan Rotation

* 6374 6374 Label, Electrical Ground

* 6916 6938 Label, Logo

* 7013 7013 Label, Warning, Exit

* 7061 7061 Label, BTU

* 8784 8784 Manual, Operating Instructions

* 7009 7009 Parts List/Wiring Diagram

* 1502 1502 Hose & Regulator Assembly

* Not shown on exploded view

Qty.

1

1

1

1

1

1

1

1

2

1

1

1

1

1

1

1

1

1

1

1

1

1

1

Page -8-

55-F / SPC-55 - PARTS

Item 55-F SPC-55 Description

1 6152 6152 Hose Assy, LP

2 6257 6257 Regulator 28" WC

3 6433 6433 POL Excess Flow 1/4 MPT

4 3955 3955 Panel, Bottom

5 1036 1036 Power Cord Assy

6 6223 6223 Strain Relief Bushing

7 1904 1904 Control Box Assy

8 3275 3275 Ignitor HYLO 801

9 6127 6127 Ftg, Male Connector

10 6133 6133 Ftg, Coupling

11 6265 6265 Ftg, Elbow Street

12 7285 7285 Thermoelectric Valve

13 6641 6641 Terminal Board

14 7431 7431 Ball Valve

* 6189 6189 Terminal "Y"

16 1811 1811 Relay Assembly

17 3141 3141 Ftg., Female Connector

18 1935 1935 Fuel Tube Assy

19 1654 1654 Motor Grille Assy

20 3676 3676 Brkt, Motor Mounting

21 1652 1652 Motor Assy

22 6086 6086 Fan, 7"

23 2245 2246 Outer Cylinder

24 7094 7094 Clip Handle Mounting

25 7095 7095 Handle

26 6225 6225 Snap Bushing, 5/8

Qty. Item 55-F SPC-55 Description

1

1

1

2

1

1

2

2

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

2

1

1

27 6226 6226 Universal Bushing

28 6224 6224 Snap Bushing, 1/2

29 6654 6654 Thermocouple 13" Lg w/J.B.

30 1082 1082 Spark Plug

31 3037 3037 Spark Plug Nut

32 6121 6121 Ftg, Male Elbow

33 3038 3038 Orifice Nut Mtg

34 1751 1751 High Limit Control Assy

35 2236 2236 Orifice Assy, LP

36 1651 1651 Middle Cylinder Assy

37 1931 1931 Flame Holder Assy

* 8784 8784 Manual, Operating Instructions/Parts List

* 8633 8633 Label, Model

* 7783 7783 Label, Operating Instructions

* 7781 7781 Label, BTU Rating

* 6374 6374 Label, Electrical Grounding

* 7651 7651 Label, Fuel

* 7503 7503 Label, Wiring Diagram

* 6383 8362 Label, Logo

* 6373 6373 Label, Fan Rotation

* 1667 1667 Hose & Regulator Assembly

* 8203 8203 Label Hang Tag, LP

* 7709 7709 Label , Fuel

* 7704 7704 Label Warning

*Not shown on exploded view

Qty.

1

2

1

1

1

1

1

1

1

1

1

1

1

2

1

1

1

2

1

1

1

1

1

1

Page -9-

85-FAC / SPC-85 - PARTS

Item SPC-85 85-FAC Description

1 1670 1730 Cylinder, Outer Assembly

2 6086 6086 Fan, 7 inch

3 1551 1551 Motor Assembly, 80-FAS

4 1671 1671 Grille, Motor Mtg./Inlet Assy. 85

5 1750 1750 Flame Holder Assembly

6 1674 1674 Cylinder, Middle Assembly

7 3038 3038 Nut, Orifice Mounting 3/4-16

8 7433 7433 Fitting, Male Elbow

9 6654 6654 Thermocouple

10 1751 1751 High Limit Control Assembly

11 1083 1083 Spark Plug, 1/8 Gap

12 3037 3037 Nut-Spark Plug

13 1673 1673 Orifice Assembly

14 1752A 1752A Control Box Assembly

15 3044 3044 Ignition Relay Bracket

16 6641 6641 Terminal Board

17 3275 3275 Spark Ignition, 115V

18 1668 1668 Fuel Tube Assembly

19 6133 6133 Fitting, Coupling

20 3787 3787 Spacer, TC Bracket

21 6127 6127 Fitting, Male Connector

22 7285 7285 TE Valve

23 7404 7404 Ball Valve, Variable Rate

24 7405 7405 Fitting, Female Connector

25 3690 3690 Control Panel Assembly

Qty.

1

1

1

1

1

1

1

3

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

Item SPC-85 85FAC Description

26 6223 6223 Strain Relief Bushing

27 1036 1036 Power Cord

28 6152 6152 Hose Assembly

29 6257 6257 Regulator, 28" W.C. (6.97 kPa)

30 6433 6433 POL Excess Flow

31 7094 7094 Clip Handle Mounting, 3 pcs.

32 7095 7095 Handle, 3 pcs

33 1811 1811 Relay

34 8362 6383 Label, Logo

35 7503 7503 Label, Wiring

36 6265 6265 Fitting, Elbow

37 3036 3036 Bracket, TC

38 3775 3775 Side Panel

* 8784 8784 Manual, Operating Instructions/Parts List

* 8507 8507 Label, Model

* 8508 8508 Label, Operating Instructions

* 7432 7432 Label, BTU Rating

* 6374 6374 Label, Electrical Grounding

* 7709 7709 Label, Fuel Ignition

* 8203 8203 Label, Hang Tag, LP

* 7704 7704 Label, Warning

* 6373 6373 Label, Fan

*Not shown on exploded view

Qty.

1

1

1

2

1

1

1

1

1

1

1

1

1

2

1

2

1

1

2

1

1

1

Page -10-

125-F / SPC-125 - PARTS

Item SPC-125 125-F Description

1 1671 1671 Grille Assembly

2 1551 1551 Motor Assembly

3 7898 7898 Fan, 8" (203.2mm)

4 1998 1999 Cylinder, Outer Shell Assembly

5 7095 7095 Handle

6 7094 7094 Clip Handle Mounting

7 7433 7433 Fitting, Male Elbow

8 1083 1083 Spark Plug, 1/8 (3.18mm) Gap

9 2003 2003 Control, High Limit Switch Assy.

10 3036 3036 Bracket, Thermocouple

11 3787 3787 Spacer, Thermocouple

12 2002 2002 Orifice, LP Assembly

13 2001 2001 Cylinder, Middle Assembly

14 3037 3037 Nut, Spark Plug

15 2004 2004 Flame Holder Assembly

16 3038 3038 Nut, Orifice Mounting

17 1668 1668 Fuel Tube Assembly

18 6654 6654 Thermocouple

19 3044 3044 Bracket Ignition Relay

20 6641 6641 Terminal Board

21 6065 6065 Spacer, Steel

22 1811 1811 Relay Assembly

23 3275 3275 Ignitor, Hi-Lo 801 Mini

24 6079 6079 Spacer, PC Standoff Nylon

25 6265 6265 Fitting, Elbow Street

26 7897 7897 Ball Valve, Variable Rate

27 7405 7405 Fitting, Female Connector

Qty.

1

1

1

1

1

1

1

1

3

1

3

2

1

1

1

1

1

2

1

1

1

1

1

1

1

1

1

Item SPC-125 125-F Description

28 6227 6227 Snap Bushing, 1 1/4 Nylon

29 7158 7158 Snap Bushing, 3/4 Nylon

30 6133 6133 Fitting, Coupling

31 6127 6127 Fitting, Male Connector

32 7285 7285 Valve, Thermoelectric

33 6223 6223 Bushing, Strain Relief

34 1036 1036 Power Cord

35 6433 6433 POL Excess Flow (6.97 kPa)

36 6257 6257 Regulator, 28" W.C.

37 6152 6152 Hose Assembly, LP

38 4019 4019 Bottom Control Box

39 7843 7843 Washer, Flat

40 2005 2005 Control Box Assembly

* 6374 6374 Label, Electrical Ground

* 6373 6373 Label, Fan

* 8362 6383 Label, Logo

* 8784 8784 Label, Operating Instructions

* 7709 7709 Label, Ignition/Fuel

* 8371 8371 Label, BTU Rating

* 7503 7503 Label, Wiring

* 8510 8510 Label, Model

* 8653 8653 Manual, Operating Instructions/Parts List

* 8203 8203 Label, Hang Tag, LP

* 7704 7704 Label, Warning

*Not shown on exploded view

Qty.

2

1

1

2

1

1

1

1

1

1

1

1

1

1

1

1

1

1

2

1

1

1

1

1

Page -11-

Models

30-FAS/SPC-30, 55-F/SPC-55, 85-FAC/SPC-85, 125-F/SPC-125

WARRANTY

We are pleased that you have selected our product and take this opportunity to assure you that qualified service facilities are available if required. With the cooperation of independent dealers, a nationwide network of authorized servicing dealers is available for your servicing requirements.

Should your product require servicing, read the section of the manual entitled “Servicing”.

Who gets the warranty? The warranty is limited to the consumer who originally purchases the product.

What is covered? This limited warranty covers all imperfections in workmanship and material.

What is not covered? This limited warranty does not cover damage resulting from accident, misuse or abuse, lack of proper maintenance, affixing of any attachments not provided with the products, or loss of parts. IN NO EVENT SHALL

SCHEU PRODUCTS COMPANY BE LIABLE FOR ANY SPECIAL,

INCIDENTAL OR CONSEQUENTIAL DAMAGES NOR FOR ANY

DAMAGES RESULTING FROM MISUSE OR MODIFICATION OF

THIS PRODUCT.

Registering this heater within 10 days of date of purchase ensures the buyer the protection as stated on our limited warranty form.

LIMITED WARRANTY

The company warrants this product to be free from imperfections in material or workmanship, under normal and proper use in accordance with instructions of The Company, for a period of one year from the date of delivery to the buyer. The

Company, at its option, will repair or replace (f.o.b. factory,

California) products returned by the buyer to the factory,

California, transportation prepaid within said one year period and found by the Company to have imperfections in material or workmanship.

If a part is damaged or missing, simply e-mail us at [email protected], visit our website at scheuco.com, or call our Technical Support Department at (888) 619-7060.

Address any Warranty Claims to the Customer Service

Department, Scheu Products Company, Incorporated, P.O. Box

250, Upland, California 91785, or e-mail us at [email protected]. Include your name, address and telephone number and include details concerning the claim. Also, supply us with the purchase date and the name and address of the dealer from whom you purchased our product.

The foregoing is the full extent of the responsibility of the

Company. There are no other warranties, express or implied.

Specifically there is no warranty of fitness for a particular purpose and there is no warranty of merchantability. In no event shall the Company be liable for delay caused by imperfections, for consequential damages, or for any charges of the expense of any nature incurred without its written consent. The cost of repair or replacement shall be the exclusive remedy for any breach of warranty. There is no warranty against infringement of the like and no implied warranty arising from course of dealing or usage of trade. This warranty will not apply to any product which has been repaired or altered outside of the California factory in any respect which in our judgment affects its condition or operation.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This Warranty gives you specific legal rights, and you may have other rights which vary from state to state.

SERVICE CENTERS

Scheu Products Company has over 1,000 service centers throughout North America. Call (888) 619-7060 or e-mail [email protected] to request the service center nearest you.

Include the Make and model of your heater in any e-mails.

INSTRUCTIONS FOR ORDING PARTS

We recommend that only parts supplied by the manufacturer be used on this unit. A locally purchased part may appear to be identical, although in reality it might endanger the heater or the persons operating the heater.

The heater should be serviced only by a trained, experienced service person.

Read the section on "Servicing" before ordering parts.

For parts orders, call 888-619-7060 or e-mail us at [email protected]. Please have the model number of your heater and the replacement part number when placing your order.

Page -12-

Hand print only. Use black or blue ink pen to fill in this form. Cross or check inside the circle.

Warranty Registration

Your Information

First Name Last name

Mailing Address

-

State City Postal code

E-mail Address

Annual house hold income before tax

Age of Purchaser

<20 years

<$9,999

20-29 years

Your Preferences

Who selected the heater?

Heater will be used by?

How did you learn about our heater?

What prompted you to buy your heater?

Where will you use the heater?

Male

Individual

Female

Advertising

Store display

Other

Sudden cold weather

Replaces old model

Heater on sale

Construction project

Construction site

Shop

Other

Both

Business

Relative/friend

Previously owned heater

Warehouse

Patio

$10,000 to $19,999 $20,000 to $34,999

40-49 years

$20,000 to $34,999

50-59 years >60 years

>$50,000

30-39 years

Fold Here

Emergency backup heat

Hard to heat location

Other

In choosing your heater the following categories were:

Somewhat

Important

Important

Very

Important

Features

Portability

Price

Quality

Heat Output

Warranty

Serviceability

Fuel economy

Ease of use

Size

Fold Here

Product Information

/ /

Date of Purchase (MM/DD/YY) Cost of Heater ($)

Brand Name All Pro

-

S/N (Located on a silver label on heater)

Universal

Model Number (Located on a black and white label on heater)

National Riverside

Store Information where heater was purchased

Store Name

Type of Store

Hardware Home Center

City

Warehouse Retailer Discount Store Farm Supply

Contractor’s Supply

State

Other

Registering this heater within 10 days of purchase ensures the buyer the protection as stated on our limited warranty form.

SCHEU PRODUCTS COMPANY, INC

ATTN: MARKETING DEPARTMENT

8855 BAKER AVENUE

RANCHO CUCAMONGA, CA 91730

Visit our website for product information, technical support, customer service, and warranty registration at:

WWW.ALLPRO-HEATERS.COM for All-Pro products or WWW.UNVERISAL-HEATERS.COM for Universal products.

advertisement

Key Features

  • 30,000-55,000 Btu/hr heating capacity
  • Adjustable thermostat
  • Compact size and lightweight design

Related manuals

Frequently Answers and Questions

What is the heating capacity of the Desa SPC-55?
The Desa SPC-55 has a heating capacity of 30,000-55,000 Btu/hr.
Is the Desa SPC-55 easy to use?
Yes, the Desa SPC-55 is very easy to use, with a simple on/off switch and adjustable thermostat.
Is the Desa SPC-55 portable?
Yes, the Desa SPC-55 is portable, with a compact size and lightweight design.