Project/Location: LER900B6L & LSR900B6L Series Contractor: Date: Bilingual Extruded Aluminum Exit Sign FEATURES Supply and install the Lumacell® LER900B6L or LSR900B6L Series LED Exit Sign. The equipment shall operate with universal AC input voltage of 120, 277 or 347VAC at less than 1.5W and universal two-wire DC input voltage from 6VDC to 24VDC at less than 2.5W for single and double face signs. The Exit Sign shall consist of a two-piece white extruded aluminum combined body/ faceplate with a maximum depth of 1 1/4”. The exit shall also include extruded aluminum end caps with white gaskets in order to provide protection to the internal components and eliminate any possible light leaks. The exit fixture shall be either single or double-faced as shown on the drawings. The faceplate shall be of a stencil design and will have 6” high letters with a 3/4” stroke indicating both EXIT and SORTIE side by side. The canopy shall fasten to the exit body for ease of installation in either ceiling or wall mount. The fixture shall contain a light source, which shall be LED with a long life and shall consist of separate AC and DC LED sources in the case of AC/DC-remote equipment. Red LED technology shall be ALINGAP. The Exit Sign in a Self-Powered configuration shall be equipped with a NickelCadmium battery and shall stay illuminated during emergency operation for at least two hours upon AC failure. The Exit Sign shall be CSA-C860 approved. . The equipment shall be Lumacell® Model: 6 to 24VDC input •CSA certified, meets or exceeds C860 requirements POWER CONSUMPTION MODEL AC SPECS AC/ special DC, red 120/347VAC DC SPECS Less than 2W 6 to 48VDC Less than 3W 120/277/347VAC Less than 2W 36 or 48 or 120VDC Less than 6W 120VAC/DC two wires, red 120VAC Less than 6W 120VDC Min. 6W Self-Powered, red 120 or 347VAC Less than 7W Ni-Cd battery Min. 2 hours Lumacell Model: TYPICAL SPECIFICATIONS •Thin profile, 2-piece extruded aluminum housing simply slides together •Available in single or double face •Custom wording available on request •Pre-specified mounting •Universal, field-selectable chevrons (knockout) •Indirect refractive technology provides bright, even illumination •Long-life, ALINGAP technology energy-efficient LED light source •Energy efficient – consumes less than 7W in AC or DC mode •Normal AC and emergency DC operation – 120, 277 or 347VAC input; AC/DC standard, red Prepared by: WIRE GUARDS 460.0059-L Wall Mount 460.0092-L Ceiling Mount DIMENSIONS Dimensions are approximate and subject to change. LER900B6L LSR900B6L 55/8” [14.2 cm] 55/8” [14.2 cm] 303/8” [77.1 cm] 95/8” [24.3 cm] 87/8” [22.5 cm] 47/8” [12.5 cm] 13/8” [3.4 cm] 303/8” [77.1 cm] ORDERING INFORMATION SERIES FACES LER9= exit/sortie LSR9= sortie/exit 00= single face, wall mount 10= single face, ceiling mount 30= double face, ceiling mount EXEMPLE: LER900B6LC860UNIV 30 www.lumacell.com APPROVAL B6LC860 COLOUR Blank= polar white BK= black TA= textured aluminium BA= brushed aluminium VOLTAGE UNIV= 120/277/347VAC, 6 to 24VDC UNIV36= 120/277/347VAC, 36VDC UNIV48= 120/277/347VAC, 48VDC UNIV120= 120/277/347VAC, 120VDC SP= 120VAC, Self-Powered SP347= 347VAC, Self-Powered 120VACDC= 120VAC, 120VDC, 2 wires OPTIONS TP= tamper proof screws 990.0119-L= tamper proof bit* *One bit needed per order.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project