Multiple Display Control Protocol for SyncMaster

Multiple Display Control Protocol for SyncMaster
SEC-VD-DSW Multiple Display Control
Multiple Display Control Protocol
for SyncMaster
Copyright © 2003 - 2008 Samsung Electronics Co., Ltd
XU_
j–— ™Ž› •–›ŠŒ
{š ‹–Šœ”Œ•› š j–— ™Ž› ¯ zˆ”šœ•Ž l“ŒŠ›™–•ŠšS j–U T ˆ““ ™Ž›š ™ŒšŒ™Œ‹U
଴ {š ‹–Šœ”Œ•› š ›Œ ›ŒŠ•–“–ŽŠˆ“ —™–—Œ™› – zˆ”šœ•Ž l“ŒŠ›™–•Šš j–”—ˆ• ˆ•‹ ›Œ Š–— •Ž
ˆ•‹V–™ œšŒ – ›š ‹–Šœ”Œ•› ž›–œ› —Œ™”šš–• – ›Œ {ŒŠ k–Šœ”Œ•› kŒ—ˆ™›”Œ•› ˆ™Œ —™–‰›Œ‹Uଵ
j–•›ˆŠ› p•–™”ˆ›–•
kš—“ˆ zV~ n™–œ—S }k iœš•Œšš kš–•
zˆ”šœ•Ž l“ŒŠ›™–•Šš j–US s›‹
Address :
416, Maetan-3Dong, YoungTong-Gu,
Suwon City, Kyungki-Do, Korea
442-742
Author:: S/W‫ڏ‬, Visual & Display Division.
History:
Version
Date
Content
Author
1.0
Protocol for 400DXn, 460D(T)Xn, 570Dxn, 700Dxn,
2007. 12. 10 820Dxn
Jongwon Park
1.1
2008. 09. 01 Protocol for 400UXn, 460UXn
Jongwon Park
1.2
2008. 09. 12 Protocol for 320MXn, 400MXn, 400CXn, 460CX,
Keunwoo Cho
1.3
2008. 10. 17 Model Number Control Protocol
Jongwon Park
1.4
Added "RGB Gain",
2008. 10. 31 Modified "Pixel Shift" and "Safety Screen" and
"model num" and "Direct CH"
Daehyuck Im
1.5
Fixed the sample code in the "API Fuction"
2008. 12. 17 Fixed some commands(MagicInfo PIP, Panel On/Off)
Daehyuck Im
1.6
2010. 07. 10 Added some commands(i.e, Timer..) for the EXn model
Daehyuck Im
1.7
2010. 08. 16 Added some commands(i.e, advanced..) for the MXn3,DXn-3,TSn-3,UXn-3,UTn-2,UVn model
1.8
2010. 09. 16 Fixed some text faults (i.e timer1,2,3 etc) for mxn-3
WonSuck Jung
UiChol, Roh
XU vŒ™ŒžUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU ]
XUXU wœ™—–šŒUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU ]
XUYU zŠ–—ŒUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU]
XUZU {Œ™”š M h‰‰™Œˆ›–•šUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU ]
YU hwp mœ•Š›–• UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU ^
YUXU tkj†jvtt†z›ˆ™›UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU ^
YUYU tkj†jvtt†z›–—UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU ^
YUZU tkj†jvtt†zŒ•‹UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU^
YU[U lŒ•›š ™–” s‰™ˆ™ M zˆ”—“Œ j–‹ŒUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU_
XP lŒ•› ™–” s‰™ˆ™ UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU _
YP }–“œ”Œ j–•›™–“ • h——“Šˆ›–•UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU_
ZP ~Œ• ›Œ h——“Šˆ›–• yŒŠŒŒš ›Œ jœ™™Œ•› }–“œ”Œ }ˆ“œŒšUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU`
ZU ~›–œ› hwp mœ•Š›–• UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUXW
ZUXU {Œ Š–””œ•Šˆ›–• š—ŒŠŠˆ›–• ž› ™šYZY œšŒ‹UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU XW
ZUYU ~ˆ› š ‹Œ™Œ•› ‰Œ›žŒŒ• |š•Ž hwp ˆ•‹ ž›–œ› hwpUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU XW
ZUZU zŒ•‹ ‹ˆ›ˆ –™”ˆ› ž› –“œ”Œ Š–•›™–“UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU XX
ZU[U ~Œ• ›Œ h——“Šˆ›–• yŒŠŒŒš ›Œ jœ™™Œ•› }–“œ”Œ }ˆ“œŒšUUUUUUUUUUUUUUUUUUUUUUUUUXX
ZU\U zˆ”—“Œ w™–ŠŒššO}–“œ”Œ j–•›™–“ a XWWPUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUXX
[U j–””ˆ•‹UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU XY
[UXU kŒ›ˆ“Œ‹ kŒšŠ™—›–• – j–””ˆ•‹šUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUX]
XP z›ˆ›œš j–•›™–“UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU X]
YP {”Œ j–•›™–“UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU X^
ZP v• {”Œ j–•›™–“UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU X_
[P v {”Œ j–•›™–“UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUX`
\P }‹Œ– j–•›™–“ Oh{}S k{}S h}S zT}‹Œ–S j–”—–•Œ•›S oktp v•“ PUUUUUUUUUUUUUUUUUUUUU YW
]P hœ‹– j–•›™–“UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU YX
^P yni j–•›™–“ OwjS iujS k}pS tˆŽŠp•– v•“ PUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU YY
_P wpw z›ˆ›œš j–•›™–“UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU YZ
`P tˆ•›Œ•ˆ•ŠŒ j–•›™–“UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU Y[
XWP zŒ™ˆ“ uœ”‰Œ™ j–•›™–“UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU Y\
XXP kš—“ˆ z›ˆ›œš j–•›™–“UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU Y]
XYP z~ }Œ™š–• j–•›™–“UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU Y^
XZP hœ›– t–›–• w“œšUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU Y_
X[P t–‹Œ“ uœ”‰Œ™ j–•›™–“UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUY`
X\P w–žŒ™ j–•›™–“UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU ZX
X]P }–“œ”Œ j–•›™–“UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU ZY
X^P tœ›Œ j–•›™–“UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUZZ
X_P p•—œ› z–œ™ŠŒ j–•›™–“UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU Z[
X`P wŠ›œ™Œ z¡Œ j–•›™–“UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU Z\
YWP k™ŒŠ› jˆ••Œ“ j–•›™–“Oh{}S k{} v•“ PUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUZ]
YXP zŠ™ŒŒ• t–‹Œ j–•›™–“UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUZ^
YYP zŠ™ŒŒ• z¡Œ j–•›™–“UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU Z_
YZP yŒ‹ všŒ› j–•›™–“UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU Z`
Y[P n™ŒŒ• všŒ› j–•›™–“UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU [W
Y\P i“œŒ všŒ› j–•›™–“UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU [X
Y]P tkj j–••ŒŠ›–• { —ŒUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU[Y
Y^P p”ˆŽŒ yŒ›Œ•›–• m™ŒŒUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU [Z
Y_P j–•›™ˆš› j–•›™–“ Oh{}S k{}S h}S zT}‹Œ–S j–”—–•Œ•›S oktp v•“ PUUUUUUUUUUUUUUU [[
Y`P i™Ž›•Œšš j–•›™–“ Oh{}S k{}S h}S zT}‹Œ–S j–”—–•Œ•›S oktp v•“ PUUUUUUUUUUUUU[\
ZWP zˆ™—•Œšš j–•›™–“ Oh{}S k{}S h}S zT}‹Œ–S j–”—–•Œ•›S oktp v•“ PUUUUUUUUUUUUU[]
ZXP j–“–™ j–•›™–“ Oh{}S k{}S h}S zT}‹Œ–S j–”—–•Œ•›S oktp v•“ PUUUUUUUUUUUUUUUUUUUU[^
ZYP {•› j–•›™–“ Oh{}S k{}S h}S zT}‹Œ–S j–”—–•Œ•›S oktp v•“ PUUUUUUUUUUUUUUUUUUUUUU [_
ZZP yŒ‹ nˆ• j–•›™–“ OwjS iujS tˆŽŠp•– v•“ PUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU[`
Z[P n™ŒŒ• nˆ• j–•›™–“ OwjS iujS tˆŽŠp•– v•“ PUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU\W
Z\P i“œŒ nˆ• j–•›™–“ OwjS iujS tˆŽŠp•– v•“ PUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU \X
Z]P {™Œ‰“Œ j–•›™–“UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU \Y
Z^P iˆšš j–•›™–“UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU\Z
Z_P iˆ“ˆ•ŠŒ j–•›™–“UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU \[
Z`P j–ˆ™šŒ j–•›™–“ OwjS iuj v•“ PUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU \\
[WP m•Œ j–•›™–“ OwjS iuj v•“ PUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU \]
[XP oTw–š›–• j–•›™–“ OwjS iuj v•“ PUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU \^
[YP }Tw–š›–• j–•›™–“ OwjS iuj v•“ PUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU \_
[ZP j“Œˆ™ tŒ•œ j–•›™–“UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU \`
[[P yŒ”–›Œ j–•›™–“UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU]W
[\P yni j–•›™ˆš› j–•›™–“ OwjS iujS k}pS tˆŽŠp•– v•“ PUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU ]X
[]P yni i™Ž›•Œšš j–•›™–“ OwjS iujS k}pS tˆŽŠp•– v•“ PUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU ]Y
[^P wpw v• V v j–•›™–“UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU]Z
[_P hœ›– h‹‘œš›”Œ•› j–•›™–“ OwjS iuj v•“ PUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU][
[`P j–“–™ {–•Œ j–•›™–“ Oh{}S k{}S h}S zT}‹Œ–S j–”—–•Œ•›S oktp v•“ PUUUUUUUUUUU ]\
\WP j–“–™ {Œ”—Œ™ˆ›œ™Œ j–•›™–“UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU ]]
\XP wpw z–œ™ŠŒ j–•›™–“ UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU ]^
\YP tˆ•Twpw zžˆ— j–•›™–“UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU ]_
\ZP wpw z¡Œ j–•›™–“UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU]`
\[P wpw s–Šˆ›Œ j–•›™–“UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU ^W
\\P z–œ•‹ zŒ“ŒŠ› j–•›™–“UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU ^X
\]P wŸŒ“ z› j–•›™–“UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU ^Y
\^P }‹Œ– ~ˆ““ j–•›™–“UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU ^Z
\_P hœ›– sˆ”— j–•›™–“UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU ^[
\`P tˆ•œˆ“ sˆ”— j–•›™–“UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU ^\
]WP zˆŒ› zŠ™ŒŒ• yœ• j–•›™–“UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU^]
]XP zˆŒ› zŠ™ŒŒ• j–•›™–“ UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU ^^
]YP }‹Œ– ~ˆ““ t–‹Œ j–•›™–“UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU ^_
]ZP zˆŒ› s–Š’UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU ^`
][P wˆ•Œ“ s–Š’UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU _W
]\P vzk v•VvUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU_X
]]P wUt–‹Œ j–•›™–“UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU _Y
]^P zUt–‹Œ j–•›™–“UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU _Z
]_P uy t–‹Œ zŒ› Oh{}S k{}S h}S zT}‹Œ–S j–”—–•Œ•›S oktp v•“ PUUUUUUUUUUUUUUUUUUUU_[
]`P wj j–“–™ {–•Œ j–•›™–“ OwjS iuj S k}pS tˆŽŠp•– –•“ PUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU _\
^WP hœ›– hœ›–h‹‘œš›”Œ•› l•ˆ‰“ŒVkšˆ‰“ŒUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU_]
^XP h““ rŒ š s–Š’UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU_^
^YP zyz {z{ j–•›™–“UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU __
^ZP m“” t–‹Œ j–•›™–“UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU _`
^[P zŽ•ˆ“ iˆ“ˆ•ŠŒ OwjSiuj v•“ PUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU `W
^\P yŒ‹ nˆ• j–•›™–“OwjS iuj v•“ PUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU `X
^]P n™ŒŒ• nˆ• j–•›™–“OwjS iuj v•“ PUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU `Y
^^P i“œŒ nˆ• j–•›™–“OwjS iuj v•“ PUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU`Z
^_P zi nˆ• OwjSiuj v•“ PUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU`[
^`P zi zˆ™—•Œšš OwjSiuj v•“ PUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU `\
_WP wˆ•Œ“ v• {”Œ UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU `]
_XP }‹Œ– ~ˆ““ v•UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU`^
_YP {Œ”—Œ™ˆ›œ™Œ j–•›™–“UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU `_
_ZP i™Ž›•Œšš zŒ•š–™UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU ``
_[P k •ˆ”Š j–•›™ˆš›Oh{}S k{}S h}S zT}‹Œ–S j–”—–•Œ•›S oktp v•“ PUUUUUUUUUUUUU XWW
_\P zˆŒ› zŠ™ŒŒ• v•UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU XWX
_]P }‹Œ– ~ˆ““ |šŒ™ j–•›™–“UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUXWY
_^P t–‹Œ“ uˆ”Œ j–•›™–“UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUXW[
__P oktp i“ˆŠ’ sŒŒ“ j–•›™–“UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU XW\
_`P yq[\ šŒ››•Ž ™Œ™ŒšUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU XW]
`WP vzk kš—“ˆ { —Œ v•VvUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU XW^
`XP {”Œ™X j–•›™–“UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU XW_
`YP {”Œ™Y j–•›™–“UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU XXW
`ZP {”Œ™Z j–•›™–“UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU XXY
`[P j“–Š’ j–•›™–“UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU XX[
`\P o–“‹ˆ h‹‹VkŒ“Œ›Œ j–•›™–“UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU XX\
`]P o–“‹ˆ nŒ› j–•›™–“UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU XX]
`^P tˆŽŠp•– wpw OtˆŽŠp•– v•“ PUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU XX^
`_P wˆ•Œ“ vuVvmmUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUXYX
``P h”‰Œ•› i™Ž›•Œšš t–‹ŒUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUXYY
XWWP mˆ• j–•›™–“UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU XYZ
XWXP nˆ””ˆ j–•›™–“UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU XY[
XWYP yŒšŒ› j–•›™–“UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU XY\
XWZP |šŒ™ hœ›– j–“–™UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU XY]
XW[P z›ˆ•‹‰ j–•›™–“UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUXY^
XW\P mˆ• z—ŒŒ‹ zŒ››•ŽUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU XY_
XW]P }‹Œ– wŠ›œ™Œ w–š›–• M z¡ŒUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU XY`
XW^P hœ›– w–žŒ™UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU XZW
1. Overview
This document provides explanations of the MDC(Multiple Display Control) Protocols
using the networks.
1.1. Purpose
This document provides an explanation of the software architecture commands and the data required for
monitor control or status check. the network board utilizes Windows XPe which uses API system. This
document is designed for the Windows XPe application software programmer , system software engineer
and tester (Programmer , Developer, Tester)
1.2. Scope
This document provides explanations of the protocols for network monitor control and status check. the
network board has installed Windows XPe application that includes access for monitor check and control
using the API system. This document does not covers communications between the network board and
the main board firmware, and communications between the network board and the server.
1.3. Terms & Abbreviations
MDC
Protocol
API
Multiple Display Control
A Communications protocol is used to communications in this case between the
network board and the Windows XPe Operating system
Application Programming Interface
]
2. API Function
Explains the APIs required for transferring data to and from the application .
2.1. MDC_COMM_Start
̻ Protocol
DWORD MDC_COMM_Start(void)
̻ Parameter
None
̻ Return Value
FALSE : Failed to start communications.
TRUE : Communications started.
̻ Explanation
Starts communicating with the monitor. If you want to communicate with the monitor firmware, you should
perform this function first, or communicating will fail.
2.2. MDC_COMM_Stop
̻ Protocol
DWORD MDC_COMM_Stop(void)
̻ Parameter
None
̻ Return Value
FALSE : Terminating communications failed.
TRUE : Communications terminated.
̻ Explanation
Terminates communications with the monitor. If you want to end communicating with the moniter firmware,
you should perform this function.
2.3. MDC_COMM_Send
̻ Protocol
DWORD MDC_COMM_Send(UCHAR *lpBuff, UCHAR length)
̻ Parameter
UCHAR *lpBuff : Data transfer to the monitor firmware
UCHAR length : lpBuff data length
̻ Return Value
FALSE : Data transfer failed
TRUE : Data transferred
^
̻ Explanation
Transfers data to the monitor.
2.4. Events from Library & Sample Code
1) Event from Library
Library sends an event to the application when it receives data from the firmware. The event is a
Windows message,[::RegisterWindowMessage(_T("MSG_MDC_COMM"))]. However the application
should respond to this [::RegisterWindowMessage(_T("MSG_MDC_COMM"))].
Windows message before it can receive data from library.
Command Data Length
0xFF
Ack/Nak
r-CMD
Val 1
'A'
0x12
Volume
3
Check
Sum
Library transfers commands and data lengths to WPARAM, a Windows message parameter. However ,
Library sends data lengths other than the Command (0xFF) to higher-byte WPRAMs and transfers them
other than the Check Sum to lower-byte WPRAMs.
Ack/Nak
Contents
0x00
NAK
0x01
ACK
ත Note : For WPARAM commands of the [::RegisterWindowMessage(_T("MSG_MDC_COMM"))]
Windows Message, 0xFF is an MDC event while 0x11 is a remote control event for the monitor.
This document does not enter further into this as this belongs to MDC documentation. The remote
control signals are mentioned separately in our documents.
2) Volume Control in Application
The data format mentioned in '4.1 Detailed Description of Commands' below is as follows.
Command Data Length
0x12
1
Data 1
Volume
The application can only retrieve data that corresponds to the parameter.
̻ Sample Code
#define CMD_VOLUME
0x12
{
UCHAR SendBuff[3] = {0, 0, 0};
SendBuff[0] = CMD_VOLUME; //Volume Control Command
SendBuff[1] = 0x01; //Data Length
SendBuff[2] = data; //Volume Data
DWORD dRetSend = MDC_COMM_Send(SendBuff, 3);
}
_
3) When the Application Receives the Current Volume Values
For command explanations mentioned below, the data formats are as follows. Library receives data
in the formats described below.
Command Data Length
0xFF
Ack/Nak
r-CMD
Val 1
'A'
0x12
Volume
3
Check
Sum
When library receives data from the firmware, it sends a Windows Message
[::RegisterWindowMessage(_T("MSG_MDC_COMM"))] for confirmation, and transfers commands and data
lengths to WPARAM, a Windows message parameter.
When the application receives the [::RegisterWindowMessage(_T("MSG_MDC_COMM"))] Windows Message
above, it can translate WPARAM and get the data that library received from the firmware.
̻ Sample Code
const UINT MDC_COMM_MSG = ::RegisterWindowMessage(_T("MSG_MDC_COMM"));
#define CMD_VOLMUE
0x12
WindowProc(UINT message, WPARAM wParam, LPARAM lParam)
{
if(message == MDC_COMM_MSG)//The Message that library receives data from the firmware
{
unsigned char* ReadBuff = (PUCHAR)wParam;
if(ReadBuff[0] == 0xFF)
//MDC Command
{
if((ReadBuff[2] == 0x01) // Replied data is ACK
{
if (ReadBuff[3] == CMD_VOLMUE) ) // Volume Data is received
ShowVolume(ReadBuff[4]);
}
}
`
3. Without API Function
3.1. The communication specification with rs232 used
‫ ڈ‬oŒŸ i•ˆ™ ›ž–Tžˆ Š–””œ•Šˆ›–• ŽŒ›š œ•Š›–••Ž ž› yzYZY œšŒ‹
‫ Žœ–™› Œ›ˆŠ•œ””–Š –› šŽ•››Œš Œ{ ڈ‬yzYZYj ˆ™Œ ˆš –““–ž•Ž
i›š yˆ›Œ
XX\YWW ‰—š
kˆ›ˆ i›š
_ ‰›š
wˆ™› u–•Œ
z›–— i›š
X ‰›
m“–ž j–•›™–“
u–•Œ
w–™› •ˆ”Œ
j–” X
‫ ڈ‬All communication will be fulfilled through hexadecimal, and Checksum is the sum of values.
Supposing there is A0+01+64=105 those result exceeds two digits, the prefix digit number will be
dropped off.
‫ ڈ‬If you send a data, at the least waiting 0.1second before any other command sent.
3.2. What is different between Using API and without API
p –œ šŒ•‹ tkj Š–””ˆ•‹ œš•Ž hwp œ•Š›–•S –œ Šˆ• œšŒ ‹ˆ›ˆ –™”ˆ› ”Œ•›–•Œ‹ •
N[UX kŒ›ˆ“Œ‹ kŒšŠ™—›–• – j–””ˆ•‹šN ‰Œ“–žU
iœ›  –œ šŒ•‹ tkj Š–””ˆ•‹ ž›–œ› hwp œ•Š›–•S –œ ”œš› ˆ‹‹ ŠŒŠ’šœ” ‹ˆ›ˆU {ˆ› š šœ”
– ˆ““ šŒ•‹ ‹ˆ›ˆU
p• ŠˆšŒ – ™ŒŠŒŒ ‹ˆ›ˆS œš•Ž hwp ˆ•‹ ž›–œ› hwp ˆ™Œ šˆ”ŒU
m–™ ŒŸˆ”—“Œ – ‹Œ™Œ•› ‰Œ›žŒŒ• |š•Ž hwp ˆ•‹ ~›–œ› hwp ˆ™Œ ˆš –““–žšU
̻ Send volume data by API function
- Send volume data : "12", "1", "data"
Command Data Length
0x12
1
Data 1
Volume
̻ Send volume data by without API
- Send volume data : "12", "1", "data", "checksum"
Command
Data
Length
Data 1
0x12
1
Volume
˧
Check
Sum
Command
Data
Length
Data 1
0x12
1
80(0x50)
0x63
XW
3.3. Send data format with volume control
The data format mentioned in '4.1 Detailed Description of Commands' below is as follows.
Command Data Length
0x12
1
Data 1
Volume
But if you do not use api function, then data format is changing as follows
Command
Data
Length
Data 1
0x12
1
Volume
Check
Sum
The application can only retrieve data that corresponds to the parameter.
3.4. When the Application Receives the Current Volume Values
The receive data format is same of data format mentioned in '4.1 Detailed Description of Commands'
below
Command Data Length
0xFF
Ack/Nak
r-CMD
Val 1
'A'
0x12
Volume
3
Check
Sum
3.5. Sample Process(Volume Control : 100)
1. Bits rate setting : 115200 bps
2. Data Bits setting : 8 bits
3. Parity setting : None
4. Stop bits setting : 1 bit
5. Flow control setting : None
6. Send hex data : "12", "1", "64", "77"
7. Receive hex data : "FF", "3", "1", "12", "64", "79"
XX
4. Command
No
Type of Command
Command
Range of Value(Decimal)
1
Status Control
0x00
-
2
Time Control
0x01
-
3
On Time Control
0x02
-
4
Off Time Control
0x03
-
5
Video Control
0x04
-
6
Audio Control
0x05
-
7
RGB Control
0x06
-
8
PIP Status Control
0x07
-
9
Maintenance Control
0x08
-
10
Serial Number Control
0x0B
-
11
Display Status Control
0x0D
-
12
SW Version Control
0x0E
-
13
Auto Motion Plus
0x0F
-
14
Model Number Control
0x10
-
15
Power Control
0x11
0 ~ 1
16
Volume Control
0x12
0 ~ 100
17
Mute Control
0x13
0 ~ 1
18
Input Source Control
0x14
-
19
Piture Size Control
0x15
20
Direct Channel Control
0x17
-
21
Screen Mode Control
0x18
-
22
Screen Size Control
0x19
0 ~ 255
23
Red Offset Control
0x1A
0 ~ 100
24
Green Offset Control
0x1B
0 ~ 100
25
Blue Offset Control
0x1C
0 ~ 100
26
MDC Connettion Type
0x1D
-
27
Image Retention Free
0x1E
-
28
Contrast Control
0x24
0 ~ 100
29
Brightness Control
0x25
0 ~ 100
30
Sharpness Control
0x26
0 ~ 100
31
Color Control
0x27
0 ~ 100
32
Tint Control
0x28
0 ~ 100
XY
33
Red Gain Control
0x29
0 ~ 100
34
Green Gain Control
0x2A
0 ~ 100
35
Blue Gain Control
0x2B
0 ~ 100
36
Treble Control
0x2C
0 ~ 100
37
Bass Control
0x2D
0 ~ 100
38
Balance Control
0x2E
0 ~ 100
39
Coarse Control
0x2F
0 ~ 1
40
Fine Control
0x30
0 ~ 1
41
H-Position Control
0x31
0 ~ 1
42
V-Position Control
0x32
0 ~ 1
43
Clear Menu Control
0x34
0
44
Remote Control
0x36
0 ~ 1
45
RGB Contrast Control
0x37
0 ~ 100
46
RGB Brightness Control
0x38
0 ~ 100
47
PIP On/Off Control
0x3C
0 ~ 1
48
Auto Adjustment Control
0x3D
0
49
Color Tone Control
0x3E
0 ~ 4
50
Color Temperature Control
0x3F
0 ~ 10
51
PIP Source Control
0x40
-
52
Main-PIP Swap Control
0x41
0 ~ 1
53
PIP Size Control
0x42
-
54
PIP Locate Control
0x43
0 ~ 4
55
Sound Select Control
0x47
0 ~ 1
56
Pixel Shift Control
0x4C
-
57
Video Wall Control
0x4F
-
58
Auto Lamp Control
0x57
-
59
Manual Lamp Control
0x58
0 ~ 100
60
Safety Screen Run Control
0x59
0 ~ 6
61
Safety Screen Control
0x5B
-
62
Video Wall Mode Control
0x5C
0 ~ 1
63
Safety Lock
0x5D
0 ~ 1
64
Panel Lock
0x5F
0 ~ 1
65
OSD On/Off
0x70
0 ~ 1
66
P. Mode Control
0x71
-
67
S. Mode Control
0x72
0 ~ 4
68
NR Mode Set
0x73
0 ~ 1
69
PC Color Tone Control
0x75
0 ~ 3
XZ
70
Auto AutoAdjustment
0x76
0 ~ 1
71
All Keys Lock
0x77
0 ~ 1
72
SRS TSXT Control
0x78
0 ~ 1
73
Film Mode
0x79
0 ~ 1
74
Signal Balance
0x7A
0 ~ 1
75
SB_Gain_R
0x7B
0 ~ 100
76
SB_Gain_G
0x7C
0 ~ 100
77
SB_Gain_B
0x7D
0 ~ 100
78
SB Gain
0x7E
0 ~ 100
79
SB Sharpness
0x7F
0 ~ 100
80
Panel On Time
0x83
-
81
Video Wall On
0x84
0 ~ 1
82
Temperature Control
0x85
0 ~ 125
83
Brightness Sensor
0x86
0 ~ 1
84
Dynamic Contrast
0x87
0 ~ 1
85
Safety Screen On
0x88
1 ~ 5
86
Video Wall User Control
0x89
-
87
Model Name Control
0x8A
-
88
HDMI Black Level Control
0x94
0 ~ 1
89
RJ45 Setting Refresh
0xA2
-
90
OSD Display Type On/Off
0xA3
91
Timer1 Control
0xA4
-
92
Timer2 Control
0xA5
-
93
Timer3 Control
0xA6
-
94
Clock Control
0xA7
95
Holiday Add/Delete Control
0xA8
96
Holiday Get Control
0xA9
97
MagicNet PIP
0xE0
-
98
Panel On/Off
0xF9
0 ~ 1
99
Ambient Brightness Mode
0xA1
-
100
Fan Control
0x8F
-
101
Gamma Control
0x96
0 ~ 4
102
Reset Control
0x9F
0 ~ 3
103
User Auto Color
0x45
-
104
Standby Control
0x4A
0 ~ 2
105
Fan Speed Setting
0x44
0 ~ 100
106
Video Picture Position & Size
0x4B
-
X[
107
Auto Power
0x33
0 ~ 1
ත Note : "-" indicates when the values to be set are multiple.
See "4.1. Detailed Description of Commands" for details
X\
4.1. Detailed Description of Commands
1) Status Control
̻
Function
The Computer shows the current settings for the TV/Monitor.
̻
Get Status
Command Data Length
0x00
̻
0
Ack
Command Data Length
Ack/Nak
r-CMD
Val 1
Val 2
0xFF
9
'A'
0x00
Power
Volume
Val 3
Val 4
Val 5
Val 6
Val 7
Mute
Input
Aspect
N Time NF
F Time NF
Check
Sum
Power : The Power Code for the TV / Monitor
Volume : The Volume value for the TV / Monitor ( 0 ~ 100 )
Mute : The Mute Code for the TV / Monitor
Input : The Input Source Code for the TV / Monitor
Aspect : The Image Size Code for the TV / Monitor
N Time NF : On Time On/Off value for the TV / Monitor(Old type timer value)
F Time NF : Off Time On/Off value for the TV / Monitor(Old type timer value)
Note : EXn Models are not support Old type timer. In case of EXn, It is always 0x00
̻
Nak
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'N'
0x00
ERR
Check
Sum
ERR : Error Code that shows the type of the error that occurrederror that occurred.
0
Check Sum Error
1
Others
X]
2) Time Control
̻
Function
The Computer controls the current the for the TV/Monitor
This function is not available in EXn model
̻
Get Time Status
Command Data Length
0x01
̻
0
Set Time
Command Data Length
0x01
5
Data 1
Data 2
Data 3
Data 4
AP Time
H Time
M Time
0
Data 5
0
AP Time
: The AM/PM value for the TV / Monitor
1
AM
0
PM
H Time : The Hour Value for the TV / Monitor ( 1 ~ 12 )
M Time : The Minute Value for the TV / Monitor ( 0 ~ 59 )
̻
Ack
Command Data Length
Ack/Nak
r-CMD
Val 1
Val 2
AP Time
H Time
Check
Sum
0xFF
7
'A'
0x01
Val 3
Val 4
Val 5
M Time
0
0
Check
Sum
AP Time, H Time, M Time : Same as above
̻
Nak
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'N'
0x01
ERR
ERR : Error Code that shows the type of the error that occurred
X^
3) On Time Control
̻
Function
The Computer controls when the TV / Monitor turns on.
This function is not available in EXn model
̻
Get On Time Status
Command Data Length
0x02
̻
0
Set On Time
Command Data Length
0x02
6
Data 5
Data 6
N Time NF
N Time SC
Data 1
Data 2
N AP Time N H Time
Data 3
Data 4
N M Time
N Time VR
N AP Time : The On Time AM/PM value for the TV / Monitor.
1
AM
0
PM
N H Time : The On Time Hour Value for the TV / Monitor ( 1 ~ 12 )
N M Time : The On Time Minute Value for the TV / Monitor ( 0 ~ 59 )
N Time VR : The On Time Volume for the TV / Monitor ( 0 ~ 100 )
N Time NF : The On Time On/Off value for the TV / Monitor
1
On Time ON
0
On Time OFF
N Time SC : The source value for the On Time Control(See 'Input Source Control ')
̻
Ack
Command Data Length
Ack/Nak
r-CMD
0xFF
8
'A'
0x02
Val 3
Val 4
Val 5
Val 6
N M Time N Time VR N Time NF
N Time SC
Val 1
Val 2
N AP Time N H Time
Check
Sum
N AP Time, N H Time, N M Time, N Time VR, N Time NF, N Time SC : Same as above
̻
Nak
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'N'
0x02
ERR
Check
Sum
ERR : Error Code that shows the type of the error that occurred
X_
4) Off Time Control
̻
Function
The Computer controls when the The Computer turn off.
This function is not available in EXn model
̻
Get Off Time Status
Command Data Length
0x03
̻
0
Set Off Time
Command Data Length
0x03
6
Data 5
Data 6
F Time NF
0
F AP Time
Data 1
Data 2
Data 3
Data 4
F AP Time F H Time F M Time
0
: The Off Time AM/PM value for the TV / Monitor
1
AM
0
PM
F H Time : The Off Time Hour Value for the TV / Monitor ( 1 ~ 12 )
F M Time : The Off Time Minute Value for the TV / Monitor ( 0 ~ 59 )
F Time NF: The Off Time On/Off value for the TV / Monitor.
̻
1
Off Time ON
0
Off Time OFF
Ack
Command Data Length
Ack/Nak
r-CMD
0xFF
8
'A'
0x03
Val 3
Val 4
Val 5
Val 6
F M Time
0
F Time NF
0
Val 1
Val 2
F AP Time F H Time
Check
Sum
F AP Time, F H Time, F M Time, F Time NF : Same as above
̻
Nak
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'N'
0x03
ERR
Check
Sum
ERR : Error Code that shows the type of the error that occurred
X`
5) Video Control (ATV, DTV, AV, S-Video, Component, HDMI Only)
̻
Function
The Computer shows the screen settings for the TV / Monitor
̻
Get Video Status
Command Data Length
0x04
̻
0
Ack
Command Data Length
Ack/Nak
r-CMD
0xFF
0x0A
'A'
0x04
Val 3
Val 4
Val 5
Val 6
Sharpnes
s
Color
Tint
Val 1
Val 2
Contrast Brightness
Val 7
ColorTone ColorTemp
Val 8
0
Check
Sum
Contrast, Brightness, Sharpness, Color, Tint, ColorTone, ColorTemp : Same as above
̻
Nak
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'N'
0x04
ERR
Check
Sum
ERR : Error Code that shows the type of the error that occurred
YW
6) Audio Control
̻
Function
The Computer controls the audio settings for the TV/ Monitor.
̻
Get Audio Status
Command Data Length
0x05
̻
0
Ack
Command Data Length
0xFF
0x05
Val 3
Check
Sum
Balance
Ack/Nak
r-CMD
Val 1
Val 2
'A'
0x05
Treble
Bass
Ack/Nak
r-CMD
Val 1
'N'
0x05
ERR
Treble, Bass, Balance : Same as above
̻
Nak
Header
0xAA
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
YX
7) RGB Control (PC, BNC, DVI, MagicInfo Only)
̻
Function
The Computer controls the screen settings of the TV / Monitor.
̻
Get Video Status
Command Data Length
0x06
̻
0
Ack
Command Data Length
0xFF
0x0A
Val 3
Val 4
ColorTone ColorTemp
Ack/Nak
r-CMD
'A'
0x06
Val 5
0
Val 6
Val 1
Val 2
Contrast Brightness
Val 7
Val 8
Red Gain Green Gain Blue Gain
Check
Sum
Contrast, Brightness, Red, Green, Blue : Same as above
̻
Nak
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'N'
0x06
ERR
Check
Sum
ERR : Error Code that shows the type of the error that occurred
YY
8) PIP Status Control
̻
Function
The Computer shows the PIP settings for TV / Monitor.
This function is not available in MXn, CXn
̻
Get PIP Status
Command Data Length
0x07
̻
0
Ack
Command Data Length
Ack/Nak
r-CMD
Val 1
Val 2
0x07
P.Size
P.Source
0xFF
6
'A'
Val 3
Val 4
0
0
Check
Sum
P.Size : The PIP size Value Code of the TV / Monitor
0x00
PIP Off
0x06
Large
0x08
Small
0x04
Double 1
0x05
Double 2
0x09
Double 3
P.Source : The PIP Source Value Code of the TV / Monitor
̻
Nak
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'N'
0x07
ERR
Check
Sum
ERR : Error Code that shows the type of the error that occurred
YZ
9) Maintenance Control
̻
Function
The Computer shows the maintenance setting of the TV / Monitor
̻
Get Maintenance Status
Command Data Length
0x08
̻
0
Ack
Command Data Length
0xFF
Ack/Nak
r-CMD
Val 1
Val 2
'A'
0x08
Power
P.Size
0x15
Val 3
Val 4
Val 5
Val 6
Val 7
Val 8
P.Source
LMax_H
LMax_M
LMax_AP
LMaxValue
LMin_H
Val 9
Val 10
Val 11
Val 12
Val 13
Val 14
LMin_M
LMin_AP
LMinValue
LampValue
ScreenInterval ScreenTime
Val 15
Val 16
Val 17
Val 18
Val 19
Check
ScreenType
V.Wall
V.WallFormat
V.WallDivid
V.WallSet
Sum
Power : The Power Code for the TV / Monitor
P.Size : The value code for the PIP Size of the TV / Monitor
P.Source : The value code for the PIP Source of the TV / Monitor
LMax_H : The value code for the Auto Lamp Max Time Hour of the TV / Monitor (1 ~ 12)
LMax_M : The value code for the Auto Lamp Max Time Minute of the TV / Monitor (0 ~ 59)
LMax_AP : The value code for the Auto Lamp Max Time AM/PM of the TV / Monitor
LMaxValue : The value code for the Auto Lamp Max value of the TV / Monitor (0 ~ 100)
LMin_H : The value code for the Auto Lamp Min Time Hour of the TV / Monitor (1 ~ 12)
LMin_M : The value code for the Auto Lamp Min Time Minute of the TV / Monitor (0 ~ 59)
LMin_AP : The value code for the Auto Lamp Min Time AM/PM of the TV / Monitor
LMinValue : The value code for the Auto Lamp Min Value of the TV / Monitor (0 ~ 100, 0xFF)
LampValue : The value code for the Manual Lamp Control value of the TV / Monitor (0 ~ 100, 0xFF)
ScreenInterval : The value code for the Safety Screen Interval of the TV/Monitor(Per Hour, 0(Off) ~ 10)
ScreenTime : The value code for the Safety Screen Time of the TV / Monitor (0(Off) ~ 5)
ScreenType : The value code for the Safety Screen Type of the TV / Monitor (3 ~ 6)
V.Wall : The value code for the Video Wall Mode of the TV / Monitor
V.WallFormat : The value code for the Video Wall Format of the TV / Monitor
V.WallDivid : The value code for the Video Wall Divider of the TV / Monitor
V.WallSet : The value code for the Video Wall Set Number of the TV / Monitor
Note : if LMinValue returns to 0xFF, it means Auto Lamp Control is in off mode
If LampValue returns to 0xFF, it means Maunal Lamp Control is in off mode.
̻
Nak
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'N'
0x08
ERR
Check
Sum
ERR : Error Code that shows the type of the error that occurred
Y[
10) Serial Number Control
̻
Function
The Computer control Serial Number for TV/Monitor.
This function is only available in MXn, CXn, EXn model series
̻
Get Serial Status
Command Data Length
0x0B
̻
0
Ack
Command
Data Length
Ack/Nak
r-CMD
Val 1
Val 2
0xFF
0x10(0x14)
'A'
0x0B
Data1
Data2
Val 3
Val 4
Val 5
Val 6
Val 7
Val 8
Val 9
Val 10
Data3
Data4
Data5
Data6
Data7
Data8
Data9
Data10
Val 11
Val 12
Val 13
Val 14
Val 15
Val 16
Val 17
Val 18
Check
Data11
Data12
Data13
Data14
Data15
Data16
Data17
Data18
Sum
Data1 ~ Data14 : Serial Number of the TV / Monitor
Data15 ~ Data18 : Reserved(EXn Model series only)
̻
Nak
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'N'
0x0B
ERR
Check
Sum
ERR : Error Code that shows the type of the error that occurred
Y\
11) Display Status Control
̻
Function
The Computer shows the Display status of the TV / Monitor
̻
Get Display status
Command Data Length
0x0D
̻
0
Ack
Command
Data
Length
Ack/Nak
r-CMD
Val 1
Val 2
0xFF
0x08
'A'
0x0D
Lamp
Temperature
Val 3
Val 4
Val 5
Val 6
Check
Bright_Sensor
No_Sync
Cur_Temp
Fan
Sum
Lamp : The Error code for the lamp of the TV / Monitor (0 : Normal, 1: Error)
Temperature : The Error code for the temperature of the TV / Monitor (0 : Normal, 1: Error)
Bright_Sensor : The Error code for the Bright Sensor of the TV / Monitor (0 : Normal, 1: Error)
No_Sync : The Error code for the Sync of the TV / Monitor (0 : Normal, 1: Error)
Cur_Temp : The value code for the Current Temperature of the TV / Monitor
Fan : The Error code for the Fan of the TV / Monitor (0 : Normal, 1: Error)
̻
Nak
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'N'
0x0D
ERR
Check
Sum
ERR : Error Code that shows the type of the error that occurred
Y]
12) SW Version Control
̻
Function
The Computer shows the version information of the TV / Monitor
̻
Get SW Version
Command Data Length
0x0E
̻
0
Ack
Command Data Length
0xFF
Ack/Nak
r-CMD
Val 1
Val 2
'A'
0x0E
Version1
Version2
0x11
Val 3
Val 4
Val 5
Val 6
Val 7
Val 8
Version3
Version4
Version5
Version6
Version7
Version8
Val 9
Val 10
Val 11
Val 12
Val 13
Val 14
Version9
Version10
Version11
Version12
Version13
Version14
Val 15
Val 16
Val 17
Val 18
Check
Version15
Version16
Version17
Version18
Sum
Version1 ~ Version11 : The Project Info of the TV / Monitor
(EXn Model : Version1 ~ Version 12)
Version12 ~ Version15 : The SW Version of the TV / Monitor
(EXn Model : Version13 ~ Version 18)
̻
Nak
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'N'
0x0E
ERR
Check
Sum
ERR : Error Code that shows the type of the error that occurred
Y^
13) Auto Motion Plus
̻
Function
Personal Computer controls the Auto Motion Plus that TV / Monitor.
This function is only available in EXn model
(It is dependent on Product Specifications - 120Hz Panel.)
̻
Get Auto Motion Plus Status
Command Data Length
0x0F
̻
0
Set Auto Motion Plus Status
Command Data Length
0x14
Data 1
Data 2
Data 3
Mode
Blur
Reduction
Judder
Reduction
3
Mode :
0x00
Off
0x01
Clear
0x02
Standard
0x03
Smooth
0x04
Custom
0x05
Demo
Blur reduction :
It is only for "Mode : Custom". If "Mode" is not custom, then it is "don't care".
0 ~ 10
Judder reduction :
It is only for "Mode : Custom". If "Mode" is not custom, then it is "don't care".
0 ~ 10
̻
Ack
Command Data Length
0xFF
5
Ack/Nak
r-CMD
Val 1
Val 2
Val 3
'A'
0x0F
Mode
Blur
Reduction
Judder
Reduction
Check
Sum
Mode : Same as above
Blur Reduction, Judder Reduction :
For Set command Type, Data2 and Data3 is same with Set command.
For Get command Type, Data2 and Data3 is LFD's Value.(even if "Mode" is not custom.)
̻
Nak
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'N'
0x0F
ERR
Check
Sum
ERR : Error Code that shows the type of the error that occurred
Y_
14) Model Number Control
̻
Function
The Computer identifies and display the TV / Monitor's Model Number.
̻
Get Model Number Status
Command Data Length
0x10
̻
0
Ack
Command Data Length
0xFF
Ack/Nak
r-CMD
Val 1
Val 2
Val 3
'A'
0x10
Species
Model
TV
0x05
Check
Sum
Species : Type of panel used used for the TV / Monitor
0x01
PDP
0x02
LCD
0x03
DLP
Model : TV / Monitor's model name
0x01
PPM50H2
0x15
SyncMaster 320DX
SyncMaster 820DXn
SyncMaster 700DXn
SyncMaster 400DXn
SyncMaster 460DXn
0x02
PPM42S2
0x16
SyncMaster 460TXn
0x03
PS-42P2ST
0x17
SyncMaster 400UXn
SyncMaster 460UXn
0x04
PS-50P2HT
0x18
SyncMaster 42TS / 42PS
0x05
SyncMaster 400T
0x19
SyncMaster P50Hn
0x06
SyncMaster 403T
0x1A
SyncMaster P50F / P50Fn
0x07
PPM42S3, SPD-42P3SM
0x1B
SyncMaster P63F/P63Fn
0x08
PPM50H3, SPD-50P3HM
0x1C
SyncMaster 320MX/320MXn
0x09
PPM63H3, SPD-63P3HM
0x1D
SyncMaster 400CX/400CXn
SyncMaster 400MX/400MXn
0x0A
PS-42P3ST
0x20
SyncMaster 460CX/460CXn
SyncMaster 460MX/460MXn
0x0B
SyncMaster 323T
WŸYX
z •Štˆš›Œ™ \YWkV\YWk•
0x0C
SyncMaster 403T - CT40CS(N)
WŸYY
z •Štˆš›Œ™ [WW|•‫|ڈ‬k
z •Štˆš›Œ™ []W|•‫|ڈ‬k
0x0D
PPMxxM5x
WŸYZ
z •Štˆš›Œ™ [WWmO•P
WŸY[
z •Štˆš›Œ™ []Wky•‫ڈ‬h
SyncMaster 320P(n)
0x0E
SyncMaster 400P(n)
SyncMaster 4600P(n)
Y`
0x25
SyncMaster 460UTn-UD
0x33
SyncMaster 400UX(n)-2
SyncMaster 460UX(n)-2
0x26
SyncMaster 460UT(n)
0x34
SyncMaster 700DRn
0x27
SyncMaster 320MX(n)-2 / MP-2
0x35
SyncMaster 230TSn / 230MXn
0x28
SyncMaster 400MX(n)-2 / FP(n)-2
0x36
SyncMaster 460DMn
0x29
SyncMaster 460MX(n)-2 / FP(n)-2
0x37
SyncMaster 400UXn-UD2
SyncMaster 460UXn-UD2
0x2A
SyncMaster P42H-2
0x38
SyncMaster P50HP-2
0x2B
SyncMaster P50HP
0x39
SyncMaster P63FP-2
0x2C
SyncMaster P50FP
0x3A
SyncMaster 400EXn
0x2D
SyncMaster P63FP
0x3B
SyncMaster 460EXn
0x2E
SyncMaster 460Rn-S
0x3C
SyncMaster 550EXn
0x2F
SyncMaster 400DXn-S
0x3D
SyncMaster 460UT(n)-2
0x30
SyncMaster 460DXn-S
WŸZl
SyncMaster 550DX(n)
0x31
SyncMaster 400CX(n)-2 /460CX(n)-2
WŸZm
SyncMaster 320CX(n)-3
SyncMaster 400CX(n)-3
SyncMaster 460CX(n)-3
WŸ[W
SyncMaster 520LD
SyncMaster 400DX(n)-2 / 460DX(n)-2
0x32
SyncMaster 700DX(n)-2 / 820DX(n)-2
SyncMaster 650MP(n)
TV : TV / Monitor's TV support / not support.
̻
0x00
Not support TV
0x01
Support TV
Nak
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'N'
0x10
ERR
Check
Sum
ERR : Error Code that shows the type of the error that occurred
ZW
15) Power Control
̻
Function
The Computer turns the TV / Monitor ON/OFF.
̻
Get Power ON/OFF Status
Command Data Length
0x11
̻
0
Set Power ON/OFF
Command Data Length
0x11
Data 1
1
Power
Power : The Power Code for the TV / Monitor
̻
1
Power ON
0
Power OFF
Ack
Command Data Length
0xFF
Ack/Nak
r-CMD
Val 1
'A'
0x11
Power
Ack/Nak
r-CMD
Val 1
'N'
0x11
ERR
3
Check
Sum
Power : Same as above
̻
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
ZX
16) Volume Control
̻
Function
The Computer changes the Volume level of the TV / Monitor㢌 Volume.
̻
Get Volume Status
Command Data Length
0x12
̻
0
Set Volume
Command Data Length
0x12
1
Data 1
Volume
Volume : The Volume level value Code of the TV / Monitor ( 0 ~ 100 )
̻
Ack
Command Data Length
0xFF
Ack/Nak
r-CMD
Val 1
'A'
0x12
Volume
Ack/Nak
r-CMD
Val 1
'N'
0x12
ERR
3
Check
Sum
Volume : Same as above
̻
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
ZY
17) Mute Control
̻
Function
The Computer turns the Mute of the TV / Monitor
̻
Get Mute ON/OFF Status
Command Data Length
0x13
̻
0
Set Mute ON/OFF
Command Data Length
0x13
1
Data 1
Mute
Mute : The Mute Code of the TV / Monitor
̻
1
Mute ON
0
Mute OFF
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x13
Mute
Ack/Nak
r-CMD
Val 1
'N'
0x13
ERR
Check
Sum
Mute : Same as above
̻
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
ZZ
18) Input Source Control
̻
Function
The Computer changes the Input Source of the TV / Monitor.
̻
Get Input Source Status
Command Data Length
0x14
̻
0
Set Input Source
Command Data Length
0x14
Data 1
1
Input
Input : The Input Source Code for the TV / Monitor
0x14
PC
0x1E
BNC
0x18
DVI
0x0C
AV
0x04
S-Video
0x08
Component
0x20
MagicInfo
0x1F
DVI_VIDEO
0x21
HDMI1
0x22
HDMI1_PC
0x30
RF(TV)
0x40
DTV
0x23
HDMI2
0x24
HDMI2_PC
0x25
DisplayPort
Note : TV/DTV ˧ only possible with models include TV
MagicInfo ˧ only possible with models include MagicInfo
DVI_VIDEO, HDMI_PC ˧ Get only
̻
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x14
Input
Ack/Nak
r-CMD
Val 1
'N'
0x14
ERR
Check
Sum
Input : Same as above
̻
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
Z[
19) Picture Size Control
̻
Function
The Computer changes the Aspect Ratio of the TV / Monitor screen.
This function is not available in VideoWall On
̻
Get Picture Size Status
Command Data Length
0x15
̻
0
Set Picture Size
Command Data Length
0x15
1
Data 1
Aspect
Aspect : The Picture Size Code for the TV / Monitor
PC, BNC, DVI, MagicInfo, HDMI_PC
0x10
16 : 9
0x18
4 : 3
TV, AV, S-VIdeo, Component, HDMI, DVI_VIDEO
0x00
Auto Wide
0x01
16 : 9
0x04
Zoom
0x05
Zoom 1
0x06
Zoom 2
0x09
Just Scan
0x0B
4 : 3
0x0C
Wide fit
0x31
Wide Zoom
0x0D
Custom
Note : Some Image Size may not available in input signal mode of 720p, 1080i
For Auto Wide ˧ TV only
̻
Ack
Command Data Length
0xFF
Ack/Nak
r-CMD
Val 1
'A'
0x15
Aspect
Ack/Nak
r-CMD
Val 1
'N'
0x15
ERR
3
Check
Sum
Aspect : Same as above
̻
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
Z\
20) Direct Channel Control(ATV, DTV Only)
̻
Function
The Computer controls the Channel of TV.
̻
Get Direct Channel status
Command Data Length
0
0x17
̻
Set Direct Channel
Command Data Length
0x17
̻
8(10)
Data 1
Data 2
Data 3
Data 4
Data 5
Country
ATV_DTV
AirCable
CH_NUM
High_Byte
CH_NUM
Low_Byte
Data 6
Data 7
Data 8
Data 9
Data 10
Sel_Monitor
Minor_CH
High_Byte
Minor_CH
Low_Byte
Reserved
Reserved
Ack
Command
Data
Length
Ack/Nak
r-CMD
0xFF
0x0A
'A'
0x17
Val 5
Val 6
CH_NUM
Low_Byte Sel_Monitor
Val 1
Val 2
Country ATV_DTV
Val 3
Val 4
AirCable
CH_NUM
High_Byte
Val 7
Val 8
Val 9
Val 10
Minor_CH
High_Byte
Minor_CH
Low_Byte
Reserved
Reserved
Check
Sum
Country : The value code for the country of the TV / Monitor (0 : Korea, 1: U.S.A, 2: EU)
ATV_DTV : The value code for the ATV/DTV of the TV / Monitor (0 : Analog TV, 1: Digital TV)
AirCable : The value code for the Air/Cable of the TV / Monitor (0 : Air, 1: Cable)
CH_NUM High_Byte : The value code for the Major Channel High-Byte of the TV / DTV (1 ~ 9999)
CH_NUM Low_Byte : The value code for the Major Channel Low-Byte of the TV / DTV (1 ~ 9999)
Sel_Minor : The value code for the Minor Channel Enable/Disable of the TV / Monitor
(0 : Enable, 1 : Disable)(DTV Only)
Minor_CH High_Byte : The value code for the Minor Channel High-Byte of the TV / Monitor
(0 ~ 9999)(DTV Only)
Minor_CH Low_Byte : The value code for the Minor Channel Low-Byte of the TV / Monitor
(0 ~ 9999)(DTV Only)
Val 9 ~ Val 10 : Reserved(EXn Only). Except the EXn, do not use Val 9 ~ Val 10
̻
Nak
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'N'
0x0D
ERR
Check
Sum
ERR : Error Code that shows the type of the error that occurred
Z]
21) Screen Mode Control
̻
Function
The Computer control Screen Mode for TV/Monitor.
This function is not available VideoWall ON, and only available Picture size is Auto Wide
This function is only available in CXn, MXn, EXn models include TV
̻
Get Screen Mode Status
Command Data Length
0x18
̻
0
Set Picture Size
Command Data Length
0x18
1
Data 1
ScrMode
Check
Sum
ScrMode : Screen Mode Code for TV/Monitor
̻
0x01
16 : 9
0x04
Zoom
0x31
Wide Zoom
0x0B
4 : 3
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x18
ScrMode
Check
Sum
ScrMode : Screen Mode Code for TV/Monitor
̻
Nak
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'N'
0x18
ERR
Check
Sum
ERR : Error Code that shows the type of the error that occurred
Z^
22) Screen Size Control
̻
Function
The Computer shows the Screen size for the TV / Monitor
This function is only available in CXn, MXn, EXn model
̻
Get Screen Size Status
Command Data Length
0x19
̻
0
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x19
Screen Size
Check
Sum
Screen Size : Screen size of TV/Monitor(0 ~ 255, Unit:Inch)
̻
Nak
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'N'
0x19
ERR
Check
Sum
ERR : Error Code that shows the type of the error that occurred
Z_
23) Red Offset Control
̻
Function
The Computer change R Offset of Signal Control function of the TV/Monitor
This function is only available Signal Balance is ON, and Input Source is PC, BNC
This function is only available in CXn, MXn, EXn model
̻
Get Signal Control R Offset Status
Command Data Length
0x1A
̻
0
Set Signal Control R Offset
Command Data Length
0x1A
1
Data 1
R Offset
Check
Sum
R Offset : R Gain for of TV/Monitor(0 ~ 100)
̻
Ack
Command Data Length
0xFF
Ack/Nak
r-CMD
Val 1
'A'
0x1A
R Offset
Ack/Nak
r-CMD
Val 1
'N'
0x1A
ERR
3
Check
Sum
R Offset : Same as above
̻
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
Z`
24) Green Offset Control
̻
Function
The Computer change G Offset of Signal Control function of the TV/Monitor
This function is only available Signal Balance is ON, and Input Source is PC, BNC only
This function is only available in CXn, MXn, EXn model
̻
Get Signal Control G Offset Status
Command Data Length
0x1B
̻
0
Set Signal Control G Offset
Command Data Length
0x1B
1
Data 1
G Offset
Check
Sum
G Offset : G Gain for of TV/Monitor(0 ~ 100)
̻
Ack
Command Data Length
0xFF
Ack/Nak
r-CMD
Val 1
'A'
0x1B
G Offset
Ack/Nak
r-CMD
Val 1
'N'
0x1B
ERR
3
Check
Sum
G Offset : Same as above
̻
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
[W
25) Blue Offset Control
̻
Function
The Computer change B Offset of Signal Control function of the TV/Monitor
This function is only available Signal Balance is ON, and Input Source is PC, BNC
This function is only available in CXn, MXn, EXn model
̻
Get Signal Control B Offset Status
Command Data Length
0x1C
̻
0
Set Signal Control B Offset
Command Data Length
0x1C
1
Data 1
B Offset
Check
Sum
B Offset : B Gain for of TV/Monitor(0 ~ 100)
̻
Ack
Command Data Length
0xFF
Ack/Nak
r-CMD
Val 1
'A'
0x1C
B Offset
Ack/Nak
r-CMD
Val 1
'N'
0x1C
ERR
3
Check
Sum
B Offset : Same as above
̻
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
[X
26) MDC Connection Type
̻
Function
The Computer get MDC Connection Type of TV/Monitor.
It is dependent on Product Specifications - RJ45 MDC Connection
This function is only available in EXn model
̻
Get Screen Mode Status
Command Data Length
0x1D
̻
0
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x18
Connection
Type
Check
Sum
Connection Type
̻
0x00
RS232C MDC
0x01
RJ45 MDC
Nak
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'N'
0x18
ERR
Check
Sum
ERR : Error Code that shows the type of the error that occurred
[Y
27) Image Retention Free
̻
Function
The Computer turns TV/Monitor Image Retention Free On/Off.
It is dependent on Product Specifications.
This function is only available in EXn model.
̻
Get Image Retention Free Status
Command Data Length
0x1E
̻
0
Set Image Retention Free Status
Command Data Length
0x1E
1
Val 1
Image Retention Free
Image Retention Free
̻
0x00
Off
0x01
On
Ack
Command Data Length
0xFF
̻
3
Ack/Nak
r-CMD
Val 1
'A'
0x1E
Image
Retention
Free
Ack/Nak
r-CMD
Val 1
'N'
0x18
ERR
Check
Sum
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
[Z
28) Contrast Control (ATV, DTV, AV, S-Video, Component, HDMI Only)
̻
Function
The Computer adjusts the Contrast of the TV / Monitor.
̻
Get Contrast Status
Command Data Length
0x24
̻
0
Set Contrast
Command Data Length
0x24
1
Data 1
Contrast
Contrast : The Contrast Value Code of the TV / Monitor ( 0 ~ 100 )
̻
Ack
Command Data Length
0xFF
Ack/Nak
r-CMD
Val 1
'A'
0x24
Contrast
Ack/Nak
r-CMD
Val 1
'N'
0x24
ERR
3
Check
Sum
Contrast : Same as above
̻
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
[[
29) Brightness Control (ATV, DTV, AV, S-Video, Component, HDMI Only)
̻
Function
The Computer adjusts the Brightness settings of the TV / Monitor
̻
Get Brightness Status
Command Data Length
0x25
̻
0
Set Brightness
Command Data Length
0x25
1
Data 1
Brightness
Brightness : The Brightness value code for the TV / Monitor( 0 ~ 100 )
̻
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x25
Brightness
Ack/Nak
r-CMD
Val 1
'N'
0x25
ERR
Check
Sum
Brightness : Same as above
̻
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
[\
30) Sharpness Control (ATV, DTV, AV, S-Video, Component, HDMI Only)
̻
Function
The Computer adjusts the Sharpness of the TV / Monitor.
̻
Get Sharpness Status
Command Data Length
0x26
̻
0
Set Sharpness
Command Data Length
0x26
1
Data 1
Sharpnes
s
Sharpness : The Sharpness Value Code for the TV / Monitor ( 0 ~ 100 )
Note : Sharpness can be set up within 50 Step(0, 2, 4, 6... 100)
̻
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x26
Sharpnes
s
Ack/Nak
r-CMD
Val 1
'N'
0x26
ERR
Check
Sum
Sharpness : Same as above
̻
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
[]
31) Color Control (ATV, DTV, AV, S-Video, Component, HDMI Only)
̻
Function
The Computer adjusts the Color settings of the TV / Monitor.
̻
Get Color Status
Command Data Length
0x27
̻
0
Set Color
Command Data Length
0x27
1
Data 1
Color
Color : The Color Value Code for the TV / Monitor ( 0 ~ 100 )
̻
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x27
Color
Ack/Nak
r-CMD
Val 1
'N'
0x27
ERR
Check
Sum
Color : Same as above
̻
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
[^
32) Tint Control (ATV, DTV, AV, S-Video, Component, HDMI Only)
̻
Function
The Computer adjusts the Tint of the TV / Monitor when the video format is NTSC
It does not work in PAL signal.
̻
Get Tint Status
Command Data Length
0x28
̻
0
Set Tint
Command Data Length
0x28
1
Data 1
Tint
Tint : The Tint Value Code for the TV / Monitor ( 0 ~ 100 )
R
Tint Value
G
(100 - Tint) Value
Note : Tint can be set up within 50Step (0, 2, 4, 6... 100)
(EXn Model : 100 Step (0~100))
̻
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x28
Tint
Ack/Nak
r-CMD
Val 1
'N'
0x28
ERR
Check
Sum
Tint : Same as above
̻
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
[_
33) Red Gain Control (PC, BNC, MagicInfo Only)
̻
Function
The Computer adjusts the Red Gain of the TV / Monitor.
̻
Get Red Gain Status
Command Data Length
0x29
̻
0
Set Red Gain
Command Data Length
0x29
1
Data 1
Red
Red : The Red Gain Value Code for the TV / Monitor ( 0 ~ 100 )
̻
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x29
Red
Ack/Nak
r-CMD
Val 1
'N'
0x29
ERR
Check
Sum
Red : Same as above
̻
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
[`
34) Green Gain Control (PC, BNC, MagicInfo Only)
̻
Function
The Computer adjusts the Green Gain of the TV / Monitor
̻
Get Green Gain Status
Command Data Length
0x2A
̻
0
Set Green Gain
Command Data Length
0x2A
1
Data 1
Green
Green : The Green Gain Value Code of the TV / Monitor ( 0 ~ 100 )
̻
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x2A
Green
Ack/Nak
r-CMD
Val 1
'N'
0x2A
ERR
Check
Sum
Green : Same as above
̻
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
\W
35) Blue Gain Control (PC, BNC, MagicInfo Only)
̻
Function
The Computer adjusts the Blue Gain of the TV / Monitor.
̻
Get Blue Gain Status
Command Data Length
0x2B
̻
0
Set Blue Gain
Command Data Length
0x2B
1
Data 1
Blue
Blue : The Blue Gain Value Code of the TV / Monitor( 0 ~ 100 )
̻
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x2B
Blue
Ack/Nak
r-CMD
Val 1
'N'
0x2B
ERR
Check
Sum
Blue : Same as above
̻
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
\X
36) Treble Control
̻
Function
The Computer adjusts the Treble of the TV / Monitor.
̻
Get Treble Status
Command Data Length
0x2C
̻
0
Set Treble
Command Data Length
0x2C
Data 1
1
Treble
Treble : The Trable Value Code for the TV / Monitor ( 0 ~ 100 )
Note : Treble can be set up within 40 Step. (0, 2, 5, 7... 100)
(EXn Model : 100 Step (0~100))
̻
Ack
Command Data Length
0xFF
Ack/Nak
r-CMD
Val 1
'A'
0x2C
Treble
Ack/Nak
r-CMD
Val 1
'N'
0x2C
ERR
3
Check
Sum
Treble : Same as above
̻
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
\Y
37) Bass Control
̻
Function
The Computer adjusts the Bass of the TV / Monitor.
̻
Get Bass Status
Command Data Length
0x2D
̻
0
Set Bass
Command Data Length
0x2D
1
Data 1
Bass
Bass : The Bass Value Code for the TV / Monitor( 0 ~ 100 )
Note : Bass can be set up within 40 Step (0, 2, 5, 7... 100)
(EXn Model : 100 Step (0~100))
̻
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x2D
Bass
Ack/Nak
r-CMD
Val 1
'N'
0x2D
ERR
Check
Sum
Bass : Same as above
̻
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
\Z
38) Balance Control
̻
Function
The Computer adjusts the Balance settings of the TV / Monitor.
This function is not available in MXn, CXn, EXn Model
̻
Get Balance Status
Command Data Length
0x2E
̻
0
Set Balance
Command Data Length
0x2E
1
Data 1
Balance
Balance : The Balance Value Code for the TV / Monitor ( 0 ~ 100 )
L
(100 - Balance) Value
R
Balance Value
Nots : Balance can be set up within 22 Step (0, 4, 9, 13... 100)
(EXn Model : 100 Step (0~100))
̻
Ack
Command Data Length
0xFF
Ack/Nak
r-CMD
Val 1
'A'
0x2E
Balance
Ack/Nak
r-CMD
Val 1
'N'
0x2E
ERR
3
Check
Sum
Balance : Same as above
̻
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
\[
39) Coarse Control (PC, BNC Only)
̻
Function
The Computer adjusts the Coarse settings of the TV / Monitor.
̻
Get Coarse Status
None
̻
Set Coarse
Command Data Length
0x2F
Data 1
1
Coarse
Coarse : The Frequency Increase/Decrease Code for the TV / Monitor
̻
1
Increase
0
Decrease
Ack
Command Data Length
0xFF
Ack/Nak
r-CMD
Val 1
'A'
0x2F
Coarse
Ack/Nak
r-CMD
Val 1
'N'
0x2F
ERR
3
Check
Sum
Coarse : Same as above
̻
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
\\
40) Fine Control (PC, BNC Only)
̻
Function
The Computer adjusts the Fine settings of the TV / Monitor.
̻
Get Fine Status
None
̻
Set Fine
Command Data Length
0x30
1
Data 1
Fine
Fine : The Phase Increase/Decrease Code for the TV / Monitor
̻
1
Increase
0
Decrease
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x30
Fine
Ack/Nak
r-CMD
Val 1
'N'
0x30
ERR
Check
Sum
Fine : Same as above
̻
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
\]
41) H-Position Control (PC, BNC Only)
̻
Function
The Computer adjusts the Horizontal Position settings of the TV / Monitor.
̻
Get H-Position Status
None
̻
Set H-Position
Command Data Length
0x31
1
Data 1
H-Pos
H-Pos : The H-Position Increase/Decrease Code for the TV / Monitor
̻
1
Shift to the right
0
Shift to the left
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x31
H-Pos
Ack/Nak
r-CMD
Val 1
'N'
0x31
ERR
Check
Sum
H-Pos : Same as above
̻
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
\^
42) V-Position Control (PC, BNC Only)
̻
Function
The Computer adjusts the Vertical Position settings of the TV / Monitor.
̻
Get V-Position Status
None
̻
Set V-Position
Command Data Length
0x32
1
Data 1
V-Pos
V-Pos : The V-Position Increase/Decrease Code for the TV / Monitor
̻
1
Shift to the right
0
Shift to the left
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x32
V-Pos
Ack/Nak
r-CMD
Val 1
'N'
0x32
ERR
Check
Sum
V-Pos : Same as above
̻
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
\_
43) Clear Menu Control
̻
Function
The Computer exits the Menu OSD on the TV / Monitor
̻
Get Clear Menu Status
None
̻
Set Clear Menu
Command Data Length
0x34
1
Data 1
Clear
Clear : 0x00 (Always)
̻
Ack
Command Data Length
0xFF
̻
3
Ack/Nak
r-CMD
Val 1
'A'
0x34
Clear
Ack/Nak
r-CMD
Val 1
'N'
0x34
ERR
Check
Sum
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
\`
44) Remote Control
̻
Function
The Computer enables and disables the IR reception feature of the TV/Monitor remote
This functions independently of the Power On/Off
̻
Get Remote Status
Command Data Length
0x36
̻
0
Set Remote Enable/Disable
Command Data Length
0x36
1
Data 1
RMC
RMC : Reception (status) Enable/Disable Code for the TV / Monitor Remote
̻
1
Remocon Enable
0
Remocon Disable
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x36
RMC
Ack/Nak
r-CMD
Val 1
'N'
0x36
ERR
Check
Sum
RMC : Same as above
̻
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
]W
45) RGB Contrast Control (PC, BNC, DVI, MagicInfo Only)
̻
Function
The Computer adjusts the Contrast settings of the TV / Monitor when the Aspect is RGB
̻
Get Contrast Status
Command Data Length
0x37
̻
0
Set Contrast
Command Data Length
0x37
1
Data 1
Contrast
Contrast : The RGB Contrast Value Code for the TV / Monitor ( 0 ~ 100 )
̻
Ack
Command Data Length
0xFF
Ack/Nak
r-CMD
Val 1
'A'
0x37
Contrast
Ack/Nak
r-CMD
Val 1
'N'
0x37
ERR
3
Check
Sum
Contrast : Same as above
̻
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
]X
46) RGB Brightness Control (PC, BNC, DVI, MagicInfo Only)
̻
Function
The Computer adjusts the Brightness settings of the TV / Monitor when the Aspect is RGB
̻
Get Brightness Status
Command Data Length
0x38
̻
0
Set Brightness
Command Data Length
0x38
1
Data 1
Brightness
Brightness : The RGB Brightness Value Code for the TV / Monitor ( 0 ~ 100 )
̻
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x38
Brightness
Ack/Nak
r-CMD
Val 1
'N'
0x38
ERR
Check
Sum
Brightness : Same as above
̻
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
]Y
47) PIP On / Off Control
̻
Function
The Computer turns the PIP function of the TV / Monitor ON/OFF.
This function is not avaliable for MagicInfo Mode and MXn, CXn model
̻
Get PIP ON/OFF Status
Command Data Length
0x3C
̻
0
Set PIP ON/OFF
Command Data Length
0x3C
Data 1
1
PIP
PIP : PIP On/Off Code for the TV / Monitor
̻
1
PIP ON
0
PIP OFF
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x3C
PIP
Ack/Nak
r-CMD
Val 1
'N'
0x3C
ERR
Check
Sum
PIP : Same as above
̻
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
]Z
48) Auto Adjustment Control (PC, BNC Only)
̻
Function
The Computer adjusts the RGB Screen settings of the TV / Monitor.
̻
Get Auto Adjustment Status
None.
̻
Set Auto Adjustment
Command Data Length
0x3D
1
Data 1
Auto
Auto : 0x00 (Always)
̻
Ack
Command Data Length
0xFF
̻
3
Ack/Nak
r-CMD
Val 1
'A'
0x3D
Auto
Ack/Nak
r-CMD
Val 1
'N'
0x3D
ERR
Check
Sum
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
][
49) Color Tone Control (ATV, DTV, AV, S-Video, Component, HDMI Only)
̻
Function
The Computer adjust the Color Tone setting of the TV / Monitor.
̻
Get Color Tone Status
Command Data Length
0x3E
̻
0
Set Color Tone
Command Data Length
0x3E
1
Data 1
Color Tone
Color Tone : The Color Tone Value Code for the TV / Monitor( 0 ~ 4, 0x50 )
̻
0x00
Cool 2
0x01
Cool 1
0x02
Normal
0x03
Warm 1
0x04
Warm 2
0x50
Off
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x3E
Color Tone
Ack/Nak
r-CMD
Val 1
'N'
0x3E
ERR
Check
Sum
Color Tone : Same as above
̻
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
]\
50) Color Temperature Control
̻
Function
The Computer adjust the Color Temp setting of the TV / Monitor.
This function is only available that Color Tone value is 'OFF'
̻
Get Color Temp Status
Command Data Length
0x3F
̻
0
Set Color Tone
Command Data Length
0x3F
1
Data 1
Color Temp
Color Temp : The Color Temp Value Code for the TV / Monitor( 0 ~ 10 )
̻
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x3F
Color Temp
Ack/Nak
r-CMD
Val 1
'N'
0x3F
ERR
Check
Sum
Color Temp : Same as above
̻
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
]]
51) PIP Source Control
̻
Function
The Computer adjusts the PIP Source of the TV / Monitor.
This function is only available when the PIP function is On.
This function is not available in MagicInfo and MXn, CXn model.
̻
Get PIP Source Status
Command Data Length
0x40
̻
0
Set PIP Source
Command Data Length
0x40
1
Data 1
P.Source
P.Source : The Input source Code for the TV / Monitor
Changing the PIP source may not be available depending on the main source.
See table below.
<460Txn Model>
PC
DVI
TV/DTV
AV
S-Video
Component
HDMI
PC
X
X
X
̺
̺
̺
X
DVI
X
X
X
̺
̺
̺
X
TV/DTV
X
X
X
X
X
X
X
AV
̺
̺
X
X
X
X
X
S-Video
̺
̺
X
X
X
X
X
Component
̺
̺
X
X
X
X
X
HDMI
X
X
X
X
X
X
X
<400/460/570/700/820Dxn Model>
PC
BNC
DVI
DVI_VIDEO
AV
S-Video
Component
HDMI
PC
X
X
X
X
̺
̺
̺
̺
BNC
X
X
X
X
̺
̺
X
̺
DVI
X
X
X
X
̺
̺
̺
X
DVI_VIDEO
X
X
X
X
̺
̺
̺
X
AV
̺
̺
̺
̺
X
X
X
X
S-Video
̺
̺
̺
̺
X
X
X
X
Component
̺
X
̺
̺
X
X
X
X
HDMI
̺
̺
X
X
X
X
X
X
Ack/Nak
r-CMD
Val 1
'A'
0x40
P.Source
Ack/Nak
r-CMD
Val 1
'N'
0x40
ERR
̻
Ack
Command Data Length
0xFF
3
Check
Sum
P.Source : Same as above
̻
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
]^
52) Main-PIP Swap Control
̻
Function
The Computer swap the main screen with the PIP screen.
This function is not available in MagicInfo and MXn, CXn model.
̻
Get Main-PIP Swap Status
None.
̻
Set Main-PIP Swap
Command Data Length
0x41
1
Data 1
Swap
Swap : 0x00 (Always)
̻
Ack
Command Data Length
0xFF
̻
3
Ack/Nak
r-CMD
Val 1
'A'
0x41
Swap
Ack/Nak
r-CMD
Val 1
'N'
0x41
ERR
Check
Sum
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
]_
53) PIP Size Control
̻
Function
The Computer changes the PIP size of the TV / Monitor.
This function is not available in MagicInfo and MXn, CXn model.
̻
Get PIP Size Status
Command Data Length
0x42
̻
0
Set PIP Size
Command Data Length
0x42
Data 1
1
P.Size
P.Size : The PIP Size Value Code for the TV / Monitor.
̻
0x00
PIP Off
0x06
Large
0x08
Small
0x04
Double 1
0x05
Double 2
0x09
Double 3
Ack
Command Data Length
0xFF
Ack/Nak
r-CMD
Val 1
'A'
0x42
P.Size
Ack/Nak
r-CMD
Val 1
'N'
0x42
ERR
3
Check
Sum
P.Size : Same as above
̻
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
]`
54) PIP Locate Control
̻
Function
The Computer adjusts the PIP position of the TV / Monitor.
This function is not available in MagicInfo and MXn, CXn model.
̻
Get PIP Locate Status
None
̻
Set PIP Locate
Command Data Length
0x43
1
Data 1
P.Locate
P.Locate : The value code for PIP LOCATE of the TV / Monitor
̻
0
PIP Off(Get Only)
1
Upper Left
2
Upper Right
3
Lower Right
4
Lower Left
Ack
Command Data Length
0xFF
Ack/Nak
r-CMD
Val 1
'A'
0x43
P.Locate
Ack/Nak
r-CMD
Val 1
'N'
0x43
ERR
3
Check
Sum
P.Locate : Same as above
̻
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
^W
55) Sound Select Control
̻
Function
The Computer adjust the Sound Settings of the TV/Monitor when the PIP function is on.
This function is not available in MXn, CXn model.
̻
Get Sound select
Command Data Length
0x47
̻
0
Set Sound select
Command Data Length
0x47
1
Data 1
S.Select
S.Select : The Sound select Code for TV / Monitor
̻
1
Main
0
Sub
Ack
Command Data Length
0xFF
Ack/Nak
r-CMD
Val 1
'A'
0x47
S.Select
Ack/Nak
r-CMD
Val 1
'N'
0x47
ERR
3
Check
Sum
S.Select : Same as above
̻
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
^X
56) Pixel Shift Control
̻
Function
The Computer control Pixel Shift of the TV/Monitor
This function is not available when VideoWall is ON, Zoom(0x39) is set, and Input Signal is VESA
mode in DVI
This function is only available in CXn, MXn, EXn model
̻
Get Pixel Shift Status
Command Data Length
0x4C
̻
0
Set Pixel Shift
Command Data Length
0x4C
0x04
Data 1
Data 2
Data 3
Data 4
Shift
H.Dot
V.Line
S.Time
Check
Sum
Shift : Pixel Shift Code of the TV/Monitor
Note : When Shift is Off, H.Dot, V.Line, S.Time value is ignored
1
ON
0
OFF
H.Dot : Horizontal Dot value code of TV/Monitor(0 ~ 4)
V.Line : Vertical Line value code of TV/Monitor(0 ~ 4)
S.Time : Shift Time value code of TV/Monitor(1 ~ 4)
̻
Ack
Command Data Length
Ack/Nak
r-CMD
Val 1
Val 2
0x4C
Shift
H.Dot
Check
Sum
0xFF
0x06
'A'
Val 3
Val 4
V.Line
S.Time
Check
Sum
Shift, H.Dot, V.Line, S.Time : Same as above
̻
Nak
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'N'
0x4C
ERR
ERR : Error Code that shows the type of the error that occurred
^Y
57) Video Wall Control
̻
Function
The Computer control the ON/OFF operation of the Video Wall feature for the TV / Monitor.
This function is not available in MagicInfo.
̻
Get Video Wall Status
Command Data Length
0x4F
̻
0
Set Video Wall
Command Data Length
0x4F
Data 1
1
V.Wall
Check
Sum
V.Wall : Video Wall Code of TV/Monitor
̻
Set
2 X 2
3 X 3
4 X 4
1 X 5
5 X 1
1 X 2
2 X 1
OFF
0x00
0x00
0x00
0x00
0x00
0x00
0x00
No. 1
0x11
0x21
0x31
0x41
0x51
0x61
0x71
No. 2
0x12
0x22
0x32
0x42
0x52
0x62
0x72
No. 3
0x13
0x23
0x33
0x43
0x53
No. 4
0x14
0x24
0x34
0x44
0x54
No. 5
0x25
0x35
0x45
0x55
...
...
...
No. 9
0x29
0x39
Check
Sum
...
...
No. 16
0x40
Ack
Command Data Length
0xFF
Ack/Nak
r-CMD
Val 1
'A'
0x4F
V.Wall
Ack/Nak
r-CMD
Val 1
'N'
0x4F
ERR
3
V.Wall : Same as above
̻
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
^Z
58) Auto Lamp Control
̻
Function
The Computer adjusts the Auto Lamp Function Settings of the TV / Monitor.
When Manual Lamp Control is set to ON, Auto Lamp Control is turned Off automatically.
̻
Get Auto Lamp
Command Data Length
0x57
̻
0
Set Auto Lamp
Command Data Length
0x57
̻
8
Data 1
LMax_H
Data 2
Data 3
Data 4
LMax_M LMax_AP LMaxValue
Data 5
Data 6
Data 7
Data 8
LMin_H
LMin_M
LMin_AP
LMinValue
Ack
Command Data Length
Ack/Nak
r-CMD
Val 1
Val 2
LMax_M
0xFF
0x0A
'A'
0x57
LMax_H
Val 3
Val 4
Val 5
Val 6
Val 7
Val 8
LMin_M
LMin_AP
LMinValue
LMax_AP LMaxValue LMin_H
Check
Sum
LMax_H : The value code for the Auto Lamp Max Time Hour of the TV / Monitor.(1 ~ 12)
LMax_M : The value code for the Auto Lamp Max Time Minute of the TV / Monitor.(0 ~ 59)
LMax_AP : The value code for the Auto Lamp Max Time AM/PM of the TV / Monitor.
LMaxValue : The value code for the Auto Lamp Max Value of the TV / Monitor. (0 ~ 100)
LMin_H : The value code for the Auto Lamp Min Time Hour of the TV / Monitor. (1 ~ 12)
LMin_M : The value code for the Auto Lamp Min Time Minute of the TV / Monitor. (0 ~ 59)
LMin_AP : The value code for the Auto Lamp Min Time AM/PM of the TV / Monitor.
LMinValue : The value code for the Auto Lamp Min Value of the TV / Monitor.(0 ~ 100)
Note : If LMinValue returns to 0xFF, it means Auto Lamp Control is in OFF mode.
If Dynamic contrast is set to on, Auto Lamp Control is not work.
̻
Nak
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'N'
0x57
ERR
Check
Sum
ERR : Error Code that shows the type of the error that occurred
^[
59) Manual Lamp Control
̻
Function
The Computer adjusts the Manual Lamp Function settings of the TV / Monitor.
When Auto Lamp Control is set to ON, Manual Lamp Control is turned off automatically.
̻
Get Manual Lamp Status
Command Data Length
0x58
̻
0
Set Manual Lamp
Command Data Length
0x58
1
Data 1
LampValue
LampValue : The Manual Lamp Value code for the TV / Monitor(0 ~ 100)
̻
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x58
LampValue
Check
Sum
LampValue : Same as above
Note : If Lamp Value returns to 0xFF ,it means Manual Lamp Control is in OFF mode
If Dynamic contrast is set to on, Auto Lamp Control is not work.
̻
Nak
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'N'
0x58
ERR
Check
Sum
ERR : Error Code that shows the type of the error that occurred
^\
60) Safety Screen Run Control
̻
Function
The Computer runs the Safety Screen promptly of the TV/Monitor
This function is only available in CXn, MXn, EXn model
̻
Get Safety Screen Run Status
Command Data Length
0x59
̻
0
Set Safety Screen Run
Command Data Length
0x59
Data 1
Safety
Screen
Type
1
Check
Sum
Safety Screen Type : Safety Screen Type of the TV/Monitor
0
Off
1
Signal Pattern
2
All White
3
Scroll
4
Bar
6
Eraser
7(undecid
ed)
Pixel
Note : Signal Pattern and All White only work with PDP models
̻
Ack
Command Data Length
0xFF
3
Ack/Nak
'A'
r-CMD
Val 1
0x59
Safety
Screen
Type
Check
Sum
Check
Sum
Safety Screen Type : Same as above
̻
Nak
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'N'
0x59
ERR
ERR : Error Code that shows the type of the error that occurred
^]
61) Safety Screen Control
̻
Function
The Computer turns the Safety Screen Control of the TV/Monitor
̻
Get Safety Screen Status
Command Data Length
0x5B
̻
0
Set Safety Screen
Command Data Length
0x5B
Data 1
Data 2
Data 3
Type
Interval
Second
1
Type : Scroll Type which will be set up into TV / Monitor (3 ~ 6)
Data 1
Type
0x03
Scroll
0x04
Pixel
0x05
Bar
0x06
Eraser
0x09
All White
0x0A
Pattern
Interval : Scroll Interval which will be set up into TV / Monitor (0(off) ~ 10)
Time : Scroll Time which will be set up into TV / Monitor
- Scroll : 0(off) ~ 5
- Pixel, Bar, Eraser : 0(off), 10, 20, 30, 40, 50
- All White, Pattern : 0(0ff), 1, 5, 10, 20, 30
̻
Ack
Command Data Length
0xFF
Ack/Nak
r-CMD
Val 1
Val 2
Val3
'A'
0x5B
Type
Interval
Second
Ack/Nak
r-CMD
Val 1
'N'
0x5B
ERR
Check
Sum
5
Check
Sum
Type : Same as above
Interval : Same as above
Second : Same as above
̻
Nak
Command Data Length
0xFF
3
ERR : Error Code that shows the type of the error that occurred
^^
62) Video Wall Mode Control
̻
Function
The Computer will switch the mode when the Video Wall feature of the TV / Monitor is set to On
This function is available only when the Video Wall is On.
This function is not available in MagicInfo
̻
Get Video Wall Mode
Command Data Length
0x5C
̻
0
Set Video Wall Mode
Command Data Length
0x5C
1
Data 1
WallMode
WallMode : The Video Wall Mode code for the TV / Monitor.
̻
1
Full
0
Natural
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x5C
WallMode
Ack/Nak
r-CMD
Val 1
'N'
0x5C
ERR
Check
Sum
WallMode : Same as above
̻
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
^_
63) Safety Lock
̻
Function
The Computer turns the Safety Lock of TV/Monitor On/Off.
This can be operated regardless of the power On/Off
̻
Get Safety Lock Status
Command Data Length
0x5D
̻
0
Set Safety Lock Enable/Disable
Command Data Length
0x5D
1
Data 1
Lock
Lock : The Lock code for the TV / Monitor
̻
1
On
0
Off
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x5D
Lock
Ack/Nak
r-CMD
Val 1
'N'
0x5D
Lock
Check
Sum
Lock : Same as above
̻
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
^`
64) Panel Lock
̻
Function
The Computer turns the Panel function Key Lock of TV/Monitor On/Off.
This function is available even when the power is turned OFF.
̻
Get Panel Lock Status
Command Data Length
0x5F
̻
0
Set Panel Lock Enable/Disable
Command Data Length
0x5F
1
Data 1
Panel Lock
Lock : The Panel Key Lock On/Off code for the TV / Monitor
̻
1
Lock
0
Unlock
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x5F
Panel Lock
Ack/Nak
r-CMD
Val 1
'N'
0x5F
ERR
Check
Sum
Lock : Same as above
̻
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
_W
65) OSD On/Off
̻
Function
The Computer turns the OSD of TV/Monitor On/Off.
When the OSD is On, the OSD is displayed on the screen.
When the OSD is Off, the OSD is not displayed on the screen.
̻
Get OSD Enable Status
Command Data Length
0x70
̻
0
Set OSD Enable/Disable
Command Data Length
0x70
1
Data 1
OSD
OSD : The OSD On/Off code for the TV / Monitor
̻
1
OSD Enable
0
OSD Disable
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x70
OSD
Ack/Nak
r-CMD
Val 1
'N'
0x70
ERR
Check
Sum
OSD : Same as above
̻
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
_X
66) P.Mode Control
̻
Function
The Computer changes the Picture Mode of TV/Monitor.
̻
Get PMode Status
Command Data Length
0x71
̻
0
Set PMode
Command Data Length
0x71
1
Data 1
PMode
PMode : The Picture Mode code for the TV / Monitor
Source
Data
Mode
AV
S-Video
Component
HDMI
ATV
DTV
0x00
Dynamic
0x01
Standard
0x02
Movie
0x03
Custom
0x10
Entertain
0x11
Internet
0x12
Text
0x13
Custom
0x14
Advertisement
0x15
Information
PC
BNC
DVI
MagicInfo
Above '0x14' and '0x15' modes can be adapted to certain models.
̻
Ack
Command Data Length
0xFF
Ack/Nak
r-CMD
Val 1
'A'
0x71
PMode
Ack/Nak
r-CMD
Val 1
'N'
0x71
ERR
3
Check
Sum
PMode : Same as above
̻
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
_Y
67) S.Mode Control
̻
Function
The Computer changes the Sound Mode of TV/Monitor.
̻
Get SMode Status
Command Data Length
0x72
̻
0
Set SMode
Command Data Length
0x72
1
Data 1
SMode
SMode : The Sound Mode code for the TV / Monitor
̻
Data
Mode
0x00
Standard
0x01
Music
0x02
Movie
0x03
Speech
0x04
Custom
Ack
Command Data Length
0xFF
Ack/Nak
r-CMD
Val 1
'A'
0x72
SMode
Ack/Nak
r-CMD
Val 1
'N'
0x72
ERR
3
Check
Sum
SMode : Same as above
̻
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
_Z
68) NR Mode Set (ATV, DTV, AV, S-Video, Component, HDMI Only)
̻
Function
The Computer changes the Digital NR Mode.
̻
Get NR Mode Status
Command Data Length
0x73
̻
0
Set NR Mode
Command Data Length
0x73
1
Data 1
NR Mode
NR Mode : The NR Mode On/Off code for the TV / Monitor
̻
1
NR Mode On
0
NR Mode Off
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x73
NR Mode
Ack/Nak
r-CMD
Val 1
'N'
0x73
ERR
Check
Sum
NR Mode : Same as above
̻
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
_[
69) PC Color Tone Control (PC, BNC , DVI, MagicInfo only)
̻
Function
The Computer changes the Color tone of TV/Monitor.
̻
Get Color Tone Status
Command Data Length
0x75
̻
0
Set Color Tone
Command Data Length
0x75
1
Data 1
Color Tone
Color Tone : The Color Tone Valur Code for the TV / Monitor(0 ~ 3)
Source
PC
DVI
BNC
̻
Data
Mode
0x00
Custom
0x01
Cool
0x02
Normal
0x03
Warm
0x50
Off
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x75
Color Tone
Chec
k
Sum
Color Tone : Same as above
̻
Nak
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'N'
0x75
ERR
Check
Sum
ERR : Error Code that shows the type of the error that occurred
_\
70) Auto AutoAdjustment Enable/Disable
̻
Function
The Computer adjusts the Auto Adjustment of TV/Monitor Enable/Disable.
Auto Adjustment is only available when the power is turned On.
If this value is Disable, then Auto Adjustment is not work.
̻
Get A.Adjustment Status
Command Data Length
0x76
̻
0
Set A.Adjustment
Command Data Length
0x76
1
Data 1
A.Adjustment
A.Adjustment : The Auto Adjustment Value Code for the TV / Monitor
̻
1
Enable
0
Disable
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x76
A.Adjustment
Check
Sum
A.Adjustment : Same as above
̻
Nak
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'N'
0x76
ERR
Check
Sum
ERR : Error Code that shows the type of the error that occurred
_]
71) All Keys Lock
̻
Function
The Computer switches both the Remote Control and the Panel Key Lock function ON/PFF.
Available even if the power is turned OFF.
̻
Get All Key Status
Command Data Length
0x77
̻
0
Set All Key Lock/Unlock
Command Data Length
0x77
Data 1
1
All Key
All Key : The Key Lock On.Off Code for the TV / Monitor
̻
1
Lock
0
Unlock
Ack
Command Data Length
0xFF
Ack/Nak
r-CMD
Val 1
'A'
0x77
All Key
Ack/Nak
r-CMD
Val 1
'N'
0x77
ERR
3
Check
Sum
All Key : Same as above
̻
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
_^
72) SRS TSXT Control
̻
Function
The Computer enables ON/OFF of SRS TSXT for TV/Monitor.
This function only works with TV/Monitor that has SRS TSXT function.
̻
Get SRS TSXT Status
Command Data Length
0x78
̻
0
Set SRS TSXT
Command Data Length
0x78
Data 1
1
SRS
SRS: SRS TSXT Code which will be set up into TV / Monitor
̻
1
SRS On
0
SRS Off
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x78
SRS
Ack/Nak
r-CMD
Val 1
'N'
0x78
ERR
Check
Sum
SRS : Same as above
̻
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
__
73) Film Mode Control
̻
Function
The Computer enables ON/OFF of Film Mode for TV/Monitor.
̻
Get Film Mode Status
Command Data Length
0x79
̻
0
Set Film Mode
Command Data Length
0x79
Data 1
1
FMode
FMode : Film Mode Code which will be set up into TV / Monitor
̻
1
Film Mode On
0
Film Mode Off
Ack
Command Data Length
0xFF
Ack/Nak
r-CMD
Val 1
'A'
0x79
FMode
Ack/Nak
r-CMD
Val 1
'N'
0x79
ERR
3
Check
Sum
FMode : Same as above
̻
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
_`
74) Signal Balance (PC,BNC Only)
̻
Function
The Computer enables ON/OFF of Signal Balance for Monitor.
̻
Get Signal Balance Status
Command Data Length
0x7A
̻
0
Set Signal Balance
Command Data Length
0x7A
Data 1
1
SBalance
SBalance : Signal Balance Code which will be set up into Monitor
̻
1
Signal Balance On
0
Signal Balance Off
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x7A
SBalance
Check
Sum
SBalance : Same as above
̻
Nak
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'N'
0x7A
ERR
Check
Sum
ERR : Error Code that shows the type of the error that occurred
`W
75) Red Gain Control(PC, BNC Only)
̻
Function
The Computer change R Gain of Signal Control function of the TV/Monitor
This function is only available Signal Balance is ON, and Input Source is PC, BNC
This function is only available in PXn,CXn, MXn, EXn model
̻
Get Signal Control R Gain Status
Command Data Length
0x7B
̻
0
Set Signal Control R Gain
Command Data Length
0x7B
1
Data 1
R Gain
Check
Sum
R Gain : R Gain for of TV/Monitor(0 ~ 100)
̻
Ack
Command Data Length
0xFF
Ack/Nak
r-CMD
Val 1
'A'
0x7B
R Gain
Ack/Nak
r-CMD
Val 1
'N'
0x7B
ERR
3
Check
Sum
R Gain : Same as above
̻
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
`X
76) Green Gain Control(PC, BNC Only)
̻
Function
The Computer change G Gain of Signal Control function of the TV/Monitor
This function is only available Signal Balance is ON, and Input Source is PC, BNC only
This function is only available in PXn, CXn, MXn, EXn model
̻
Get Signal Control G Gain Status
Command Data Length
0x7C
̻
0
Set Signal Control G Gain
Command Data Length
0x7C
1
Data 1
G Gain
Check
Sum
G Gain : G Gain for of TV/Monitor(0 ~ 100)
̻
Ack
Command Data Length
0xFF
Ack/Nak
r-CMD
Val 1
'A'
0x7C
G Gain
Ack/Nak
r-CMD
Val 1
'N'
0x7C
ERR
3
Check
Sum
G Gain : Same as above
̻
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
`Y
77) Blue Gain Control(PC, BNC Only)
̻
Function
The Computer change B Gain of Signal Control function of the TV/Monitor
This function is only available Signal Balance is ON, and Input Source is PC, BNC
This function is only available in PXn, CXn, MXn, EXn model
̻
Get Signal Control B Offset Status
Command Data Length
0x7D
̻
0
Set Signal Control B Offset
Command Data Length
0x7D
1
Data 1
B Gain
Check
Sum
B Gain : B Gain for of TV/Monitor(0 ~ 100)
̻
Ack
Command Data Length
0xFF
Ack/Nak
r-CMD
Val 1
'A'
0x7D
B Gain
Ack/Nak
r-CMD
Val 1
'N'
0x7D
ERR
3
Check
Sum
B Gain : Same as above
̻
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
`Z
78) SB Gain (PC,BNC Only)
̻
Function
The Computer changes the Gain value of Signal Balance for Monitor.
̻
Get SBGain Status
Command Data Length
0x7E
̻
0
Set SBGain
Command Data Length
0x7E
Data 1
1
SBGain
SBGain : Gain value which will be set up into Monitor.Code (0~ 100)
̻
Ack
Command Data Length
0xFF
Ack/Nak
r-CMD
Val 1
'A'
0x7E
SBGain
Ack/Nak
r-CMD
Val 1
'N'
0x7E
ERR
3
Check
Sum
SBGain : Same as above
̻
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
`[
79) SB Sharpness (PC,BNC Only)
̻
Function
The Computer changes the Sharpness value of Signal Balance for Monitor.
̻
Get SB Sharpness Status
Command Data Length
0x7F
̻
0
Set SB Sharpness
Command Data Length
0x7F
1
Data 1
SBSharpness
SBSharpness : Sharpness value which will be set up into Monitor.Code (0~ 100)
̻
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x7F
SBSharpness
Check
Sum
SBSharpness : Same as above
̻
Nak
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'N'
0x7F
ERR
Check
Sum
ERR : Error Code that shows the type of the error that occurred
`\
80) Panel On Time
̻
Function
The Computer show the Panel On Time status for Monitor.
̻
Get Panel On Time Status
Command Data Length
0x83
̻
0
Ack
Command Data Length
0xFF
4
Ack/Nak
r-CMD
Val 1
Val 2
'A'
0x83
PTime_H
PTime_L
Check
Sum
PTime_H : Panel On Time High
PTime_L : Panel On Time Low
̻
Nak
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'N'
0x83
ERR
Check
Sum
ERR : Error Code that shows the type of the error that occurred
`]
81) Video Wall On
̻
Function
The Computer enables ON/OFF of Video Wall for Monitor.
This function is not available in MagicInfo
̻
Get Video Wall Status
Command Data Length
0x84
̻
0
Set Video Wall
Command Data Length
0x84
1
Data 1
V.Wall_On
V.Wall_On : Video Wall On Code which will be set up into Monitor
̻
1
Video Wall On
0
Video Wall Off
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x84
V.Wall_On
Check
Sum
V.Wall_On : Same as above
̻
Nak
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'N'
0x84
ERR
Check
Sum
ERR : Error Code that shows the type of the error that occurred
`^
82) Temperature Control
̻
Function
The Computer set the Max temperature of TV/Monitor.
This is only available for models which provide the temperature status information.
̻
Get Temperature Status
Command Data Length
0x85
̻
0
Set Temperature
Command Data Length
0x85
1
Data 1
Temperature
Temperature : Temperature Code which will be set up into TV/Monitor
Data
̻
75 ~ 125(୅)
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x85
Temperature
Check
Sum
Temperature : Same as above
̻
Nak
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'N'
0x85
ERR
Check
Sum
ERR : Error Code that shows the type of the error that occurred
`_
83) Brightness Sensor
̻
Function
The Computer enables ON/OFF of Brightness Sensor for TV/Monitor.
This is only available for models with the Brightness Sensor function.
This is not available for PDP models.
̻
Get Brightness Sensor ON/OFF Status
Command Data Length
0x86
̻
0
Set Brightness Sensor ON/OFF
Command Data Length
0x86
1
Data 1
BR_Sensor
BR_Sensor : Brightness Sensor Code which will be set up into Monitor
̻
1
Brightness Sensor On
0
Brightness Sensor Off
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x86
BR_Sensor
Check
Sum
BR_Sensor : Same as above
̻
Nak
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'N'
0x86
ERR
Check
Sum
ERR : Error Code that shows the type of the error that occurred
``
84) Dynamic Contrast(ATV, DTV, AV, S-Video, Component, HDMI Only)
̻
Function
The Computer enables ON/OFF of Dynamic Contrast for TV/Monitor.
This does not operate in PC, DVI, and MagicInfo modes.
This is not available for PDP models.
̻
Get Dynamic Contrast ON/OFF Status
Command Data Length
0x87
̻
0
Set Dynamic Contrast ON/OFF
Command Data Length
0x87
Data 1
1
DY_Cont
DY_Cont : Dynamic Contrast Code which will be set up into Monitor
̻
1
Dynamic Contrast On
0
Dynamic Contrast Off
Ack
Command Data Length
0xFF
Ack/Nak
r-CMD
Val 1
'A'
0x87
DY_Cont
Ack/Nak
r-CMD
Val 1
'N'
0x87
ERR
3
Check
Sum
DY_Cont : Same as above
̻
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
XWW
85) Safety Screen On
̻
Function
Allows Safety Screen function for current TV/Monitor screen
̻
Get Safety screen Status
None
̻
Set Safety screen
Command Data Length
0x88
Data 1
1
Second
Second : Time to function Scroll for TV/Monitor. (Per Second 1 ~ 5)
̻
Ack
Command Data Length
0xFF
Ack/Nak
r-CMD
Val 1
'A'
0x88
Second
Ack/Nak
r-CMD
Val 1
'N'
0x88
ERR
3
Check
Sum
Second : Same as above
̻
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
XWX
86) Video Wall User Control
Function
̻
The Computer control the ON/OFF operation of the Video Wall feature for the TV / Monitor.
This does not operate in MagicInfo mode and while PIP is operating.
Get Video Wall Status
̻
Command Data Length
0x89
0
Set Video Wall
̻
Command Data Length
0x89
Data 1
2
Data 2
Wall_Div Wall_SNo
Wall_Div : The Video Wall Divider code for the TV / Monitor
(It is dependent on Product Specifications)
- 5X5 Video Wall Model :
- 10X10 Video Wall Model :
V
H
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
OFF
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
1
0x11 0x12 0x13 0x14 0x15 0x16 0x17 0x18 0x19 0x1A 0x1B 0x1C 0x1D 0x1E 0x1F
2
0x21 0x22 0x23 0x24 0x25 0x26 0x27 0x28 0x29 0x2A 0x2B 0x2C 0x2D 0x2E 0x2F
3
0x31 0x32 0x33 0x34 0x35 0x36 0x37 0x38 0x39 0x3A 0x3B 0x3C 0x3D 0x3E 0x3F
4
0x41 0x42 0x43 0x44 0x45 0x46 0x47 0x48 0x49 0x4A 0x4B 0x4C 0x4D 0x4E 0x4F
5
0x51 0x52 0x53 0x54 0x55 0x56 0x57 0x58 0x59 0x5A 0x5B 0x5C 0x5D 0x5E 0x5F
6
0x61 0x62 0x63 0x64 0x65 0x66 0x67 0x68 0x69 0x6A 0x6B 0x6C 0x6D 0x6E 0x6F
7
0x71 0x72 0x73 0x74 0x75 0x76 0x77 0x78 0x79 0x7A 0x7B 0x7C 0x7D 0x7E
N/A
8
0x81 0x82 0x83 0x84 0x85 0x86 0x87 0x88 0x89 0x8A 0x8B 0x8C
N/A
N/A
N/A
9
0x91 0x92 0x93 0x94 0x95 0x96 0x97 0x98 0x99 0x9A 0x9B
N/A
N/A
N/A
N/A
10
0xA1 0xA2 0xA3 0xA4 0xA5 0xA6 0xA7 0xA8 0xA9 0xAA N/A
N/A
N/A
N/A
N/A
11
0xB1 0xB2 0xB3 0xB4 0xB5 0xB6 0xB7 0xB8 0xB9
N/A
N/A
N/A
N/A
N/A
N/A
12
0xC1 0xC2 0xC3 0xC4 0xC5 0xC6 0xC7 0xC8
N/A
N/A
N/A
N/A
N/A
N/A
N/A
13
0xD1 0xD2 0xD3 0xD4 0xD5 0xD6 0xD7
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
14
0xE1 0xE2 0xE3 0xE4 0xE5 0xE6 0xE7
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
15
0xF1 0xF2 0xF3 0xF4 0xF5 0xF6
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
XWY
Wall_SNo : The Video Wall Number code for the TV / Monitor
(It is dependent on Product Specifications)
- 5X5 Video Wall Model : (1~25)
Set Number
Data
1
0x01
2
0x02
...
...
24
0x18
25
0x19
- 10X10 Video Wall Model : (1~100)
Set Number
Data
1
0x01
2
0x02
...
...
99
0x63
100
0x64
̻
Ack
Command Data Length
0xFF
Ack/Nak
r-CMD
'A'
0x89
4
Val 1
Val 2
Wall_Div Wall_SNo
Check
Sum
Wall_Div : Same as above
Wall_SNo : Same as above
̻
Nak
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'N'
0x89
ERR
Check
Sum
ERR : Error Code that shows the type of the error that occurred
XWZ
U
87) Model Name Control
̻
Function
The Computer shows the Model Name information of the TV / Monitor
̻
Get Model Name Status
Command Data Length
0x8A
̻
0
Ack
Command Data Length
Ack/Nak
r-CMD
0xFF
Length
'A'
0x8A
Val 6
Val 7
Val_8
Val_9
Val 1
Val 2
Val_3
Val_4
Val_5
M_Name1 M_Name2 M_Name3 M_Name4 M_Name5
Val_10
Val 11
Val_12
Val_13
M_Name6 M_Name7 M_Name8 M_Name9 M_Name10 M_Name11 M_Name12 M_Name13
Val_14
Val_15
Val_16
Val....
M_Name14
M_Name15
M_Name16
M_Name...
Check Sum
Length : Length means number of M_Name elements & Ack/Nak & r-CMD.
M_Name1 ~ M_Name... : The Model Name code for the TV / Monitor
M_Name1
'S'
M_Name2
'y'
M_Name3
'n'
M_Name4
'c'
M_Name5
'M'
M_Name6
'a'
M_Name7
's'
M_Name8
't'
M_Name9
'e'
M_Name10
'r'
M_Name11
'4'
M_Name12
'0'
M_Name13
'0'
M_Name14
'D'
M_Name15
'X'
M_Name16
'N'
XW[
88) HDMI Black Level Control
̻
Function
The Computer turns HDMI Black Level function of TV/ Monitor.
This function is only available in EXn, MXn-3,DXn-3,TSn-3,UXn-3,UTn-2,UVn model
̻
Get HDMI Black Level Status
Command Data Length
0x94
̻
0
Set HDMI Black Level
Command Data Length
0x94
Data 1
1
HDMI_b
HDMI_b : HDMI Black Level Control value set on TV/Monitor
̻
0
Normal
1
Low
Ack
Command Data Length
0xFF
Ack/Nak
r-CMD
Val 1
'A'
0x94
HDMI_b
Ack/Nak
r-CMD
Val 1
'N'
0x94
ERR
3
Check
Sum
HDMI_b : Same as above
̻
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
XW\
89) RJ45 setting refresh
̻
Function
The Computer controls Ethernet Converter IC Reset.
This function is only available in EXn, MXn-3,DXn-3,TSn-3,UXn-3,UTn-2,UVn model
̻
Set RJ45 setting Refresh Status
Command Data Length
0xA2
1
Data 1
Reset Command
Reset Command : Reset Ethernet Converter IC on TV/Monitor
Reset Command should be set '1'
0x01
̻
Reset
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0xA2
Reset
Command
Check
Sum
Reset Command : Same as above
̻
Nak
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'N'
0xA2
ERR
Check
Sum
ERR : Error Code that shows the type of the error that occurred
XW]
90) OSD Display Type On/Off
̻
Function
The Computer turns the OSD of TV/Monitor On/Off.
When the OSD is On, the OSD is displayed on the screen.
When the OSD is Off, the OSD is not displayed on the screen.
̻
Get OSD Enable Status
Command Data Length
0xA3
̻
0
Set OSD Enable/Disable
Command Data Length
0xA3
2
Data 1
Data 2
OSD
Type
OSD
On/Off
OSD Type: The OSD code for the TV / Monitor
0
Source OSD
1
Not Optimum Mode OSD
2
No Signal OSD
3
MDC OSD
OSD ON/OFF: The OSD On/Off code which has set above for the TV / Monitor
̻
0
OSD Off
1
OSD On
Ack
Val 1
Command Data Length
0xFF
3
Ack/Nak
'A'
r-CMD
0xA3
BIT
7
BIT
6
BIT
5
BIT
4
Reserved
BIT
3
BIT
2
BIT
1
BIT
0
‫ۀۋ۔گ ۀۋ۔گ ۀۋ۔گ ۀۋ۔گ‬
‫ڎ‬
‫ڍ‬
‫ڌ‬
‫ڋ‬
‫ڪڊۉڪ ڪڊۉڪ ڪڊۉڪ ڪڊۉڪ‬
‫ہہ‬
‫ہہ‬
‫ہہ‬
‫ہہ‬
Check
Sum
OSD Type: Same as above
̻
Nak
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'N'
0xA3
ERR
Check
Sum
ERR : Error Code that shows the type of the error that occurred
XW^
91) Timer1 Control
̻
Function
The Computer controls the Timer1 that TV/Monitor
This function is only available in EXn, MXn-3,DXn-3,TSn-3,UXn-3,UTn-2,UVn model
(It is dependent on Product Specifications.)
̻
Get Timer1 Status
Command Data Length
0xA4
̻
0
Set Timer1
Command
Data Length
Data 1
Data 2
Data 3
Data 4
Data 5
Data 6
0xA4
0x0D
On H
On M
On AM/PM
On_Act
Off H
Off M
Data 7
Data 8
Data 9
Data 10
Data 11
Data 12
Data 13
Off AM/PM
Off_Act
Repeat
Manual
Weekday
Volume
Source
Holiday
Apply
On H : On Time Hour value to be set on TV/Monitor(1 ~ 12)
On M : On Time Minute value to be set on TV/Monitor(0 ~ 59)
On AM/PM : On Time AM/PM value to be set on TV/Monitor
0x00
PM
0x01
AM
On_Act : On Time Inactivated/Activated to be set on TV/Monitor
Off H : Off Time Hour value to be set on TV/Monitor(1 ~ 12)
Off M : Off Time Minute value to be set on TV/Monitor(0 ~ 59)
Off AM/PM : Off Time AM/PM value to be set on TV/Monitor
0x00
PM
0x01
AM
Off_Act : Off Time Inactivated/Activated to be set on TV/Monitor
Repeat : Repeat value to be set on TV/Monitor(0 ~ 5)
0x00
Once
0x01
Everyday
0x02
Mon ~ Fri
0x03
Mon ~ Sat
0x04
Sat ~ Sun
0x05
Manual Weekday
Manual Weekday : Weekday value to be set on TV/Monitor
BIT7
BIT6
BIT5
BIT4
BIT3
BIT2
BIT1
BIT0
X
Sat
Fri
Thu
Wed
Tue
Mon
Sun
BIT7 : Don't care
XW_
Volume : Volume to be set on TV/Monitor
Source : Source to be set on TV/Monitor
Holiday Apply : Holiday Apply/Don't Apply to be set on TV/Monitor.(0 ~ 1)
̻
0x00
Don't Apply
0x01
Apply
Ack
Command Data Length
Ack/Nak
r-CMD
Val 1
Val 2
Val 3
Val 4
Val 5
0xA4
On H
On M
On
AM/PM
On_Act
Off H
0xFF
0x0F
'A'
Val 6
Val 7
Val 8
Val 9
Val 10
Val 11
Val 12
Data 13
Off M
Off
AM/PM
Off_Act
Repeat
Manual
Weekday
Volume
Source
Holiday
Apply
Ack/Nak
r-CMD
Val 1
'N'
0xA4
ERR
Check
Sum
Val 1 ~ Val 13 : Same as above
̻
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
XW`
92) Timer2 Control
̻
Function
The Computer controls the Timer2 that TV/Monitor
This function is only available in EXn, MXn-3,DXn-3,TSn-3,UXn-3,UTn-2,UVn model
(It is dependent on Product Specifications.)
̻
Get Timer2 Status
Command Data Length
0xA5
̻
0
Set Timer2
Command
Data Length
Data 1
Data 2
Data 3
Data 4
Data 5
Data 6
0xA5
0x0D
On H
On M
On AM/PM
On_Act
Off H
Off M
Data 7
Data 8
Data 9
Data 10
Data 11
Data 12
Data 13
Off AM/PM
Off_Act
Repeat
Manual
Weekday
Volume
Source
Holiday
Apply
On H : On Time Hour value to be set on TV/Monitor(1 ~ 12)
On M : On Time Minute value to be set on TV/Monitor(0 ~ 59)
On AM/PM : On Time AM/PM value to be set on TV/Monitor
0x00
PM
0x01
AM
On_Act : On Time Inactivated/Activated to be set on TV/Monitor
Off H : Off Time Hour value to be set on TV/Monitor(1 ~ 12)
Off M : Off Time Minute value to be set on TV/Monitor(0 ~ 59)
Off AM/PM : Off Time AM/PM value to be set on TV/Monitor
0x00
PM
0x01
AM
Off_Act : Off Time Inactivated/Activated to be set on TV/Monitor
Repeat : Repeat value to be set on TV/Monitor(0 ~ 5)
0x00
Once
0x01
Everyday
0x02
Mon ~ Fri
0x03
Mon ~ Sat
0x04
Sat ~ Sun
0x05
Manual Weekday
Manual Weekday : Weekday value to be set on TV/Monitor
BIT7
BIT6
BIT5
BIT4
BIT3
BIT2
BIT1
BIT0
X
Sat
Fri
Thu
Wed
Tue
Mon
Sun
BIT7 : Don't care
XXW
Volume : Volume to be set on TV/Monitor
Source : Source to be set on TV/Monitor
Holiday Apply : Holiday Apply/Don't Apply to be set on TV/Monitor.(0 ~ 1)
̻
0x00
Don't Apply
0x01
Apply
Ack
Command Data Length
Ack/Nak
r-CMD
Val 1
Val 2
Val 3
Val 4
Val 5
0xA5
On H
On M
On
AM/PM
On_Act
Off H
0xFF
0x0F
'A'
Val 6
Val 7
Val 8
Val 9
Val 10
Val 11
Val 12
Data 13
Off M
Off
AM/PM
Off_Act
Repeat
Manual
Weekday
Volume
Source
Holiday
Apply
Ack/Nak
r-CMD
Val 1
'N'
0xA5
ERR
Check
Sum
Val 1 ~ Val 13 : Same as above
̻
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
XXX
93) Timer3 Control
̻
Function
The Computer controls the Timer3 that TV/Monitor
This function is only available in EXn, MXn-3,DXn-3,TSn-3,UXn-3,UTn-2,UVn model
(It is dependent on Product Specifications.)
̻
Get Timer1 Status
Command Data Length
0xA6
̻
0
Set Timer1
Command
Data Length
Data 1
Data 2
Data 3
Data 4
Data 5
Data 6
0xA6
0x0D
On H
On M
On AM/PM
On_Act
Off H
Off M
Data 7
Data 8
Data 9
Data 10
Data 11
Data 12
Data 13
Off AM/PM
Off_Act
Repeat
Manual
Weekday
Volume
Source
Holiday
Apply
On H : On Time Hour value to be set on TV/Monitor(1 ~ 12)
On M : On Time Minute value to be set on TV/Monitor(0 ~ 59)
On AM/PM : On Time AM/PM value to be set on TV/Monitor
0x00
PM
0x01
AM
On_Act : On Time Inactivated/Activated to be set on TV/Monitor
Off H : Off Time Hour value to be set on TV/Monitor(1 ~ 12)
Off M : Off Time Minute value to be set on TV/Monitor(0 ~ 59)
Off AM/PM : Off Time AM/PM value to be set on TV/Monitor
0x00
PM
0x01
AM
Off_Act : Off Time Inactivated/Activated to be set on TV/Monitor
Repeat : Repeat value to be set on TV/Monitor(0 ~ 5)
0x00
Once
0x01
Everyday
0x02
Mon ~ Fri
0x03
Mon ~ Sat
0x04
Sat ~ Sun
0x05
Manual Weekday
Manual Weekday : Weekday value to be set on TV/Monitor
BIT7
BIT6
BIT5
BIT4
BIT3
BIT2
BIT1
BIT0
X
Sat
Fri
Thu
Wed
Tue
Mon
Sun
BIT7 : Don't care
XXY
Volume : Volume to be set on TV/Monitor
Source : Source to be set on TV/Monitor
Holiday Apply : Holiday Apply/Don't Apply to be set on TV/Monitor.(0 ~ 1)
̻
0x00
Don't Apply
0x01
Apply
Ack
Command Data Length
Ack/Nak
r-CMD
Val 1
Val 2
Val 3
Val 4
Val 5
0xA6
On H
On M
On
AM/PM
On_Act
Off H
0xFF
0x0F
'A'
Val 6
Val 7
Val 8
Val 9
Val 10
Val 11
Val 12
Data 13
Off M
Off
AM/PM
Off_Act
Repeat
Manual
Weekday
Volume
Source
Holiday
Apply
Ack/Nak
r-CMD
Val 1
'N'
0xA6
ERR
Check
Sum
Val 1 ~ Val 13 : Same as above
̻
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
XXZ
94) Clock Control
̻
Function
The Computer controls current time of TV/Monitor
This function is only available in EXn, MXn-3,DXn-3,TSn-3,UXn-3,UTn-2,UVn model
(It is dependent on Product Specifications.)
̻
Get Clock Status
Command Data Length
0xA7
̻
0
Set Clock
Command
Data Length
Data 1
Data 2
Data 3
Data 4
Data 5
Data 6
Data 7
0xA7
0x07
Day
Hour
Minute
Month
Year1
Year2
AM/PM
Day : Day value to be set on TV/Monitor(1 ~ 31)
Hour : Hour value to be set on TV/Monitor(1 ~ 12)
Minute : Day value to be set on TV/Monitor(0 ~ 59)
Month : Month value to be set on TV/Monitor(1 ~ 12)
Year1 : Year value to be set on TV/Monitor(High Byte)
Year2 : Year value to be set on TV/Monitor(Low Byte)
ex) Current year is 2010.
2010(Dec) ˧ 0x07DA(Hex)
Year1 : 0x07
Year2 : 0xDA
AM/PM : AM/PM value to be set on TV/Monitor(0 ~ 1)
̻
0x00
PM
0x01
AM
Ack
Command Data Length Ack/Nak r-CMD
0xFF
0x09
'A'
0xA7
Val 1
Val 2
Day
Hour
Val 3
Val 4
Val 5
Val 6
Val 7
Minute Month Year1 Year2 AM/PM
Check
Sum
Val 1 ~ Val 7 : Same as above
̻
Nak
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'N'
0xA7
ERR
Check
Sum
ERR : Error Code that shows the type of the error that occurred
XX[
95) Holiday Add/Delete Control
̻
Function
The Computer controls Holiday List of TV/Monitor
This function is only available in EXn, MXn-3,DXn-3,TSn-3,UXn-3,UTn-2,UVn model
(It is dependent on Product Specifications.)
̻
Set Holiday Status
Command
Data Length
Data 1
Data 2
Data 3
Data 4
Data 5
0xA8
0x05
Management
command
Month_S
Day_S
Month_E
Day_E
Management command : Adjust command Holiday list of TV/Monitor
0x00
Add Holiday
0x01
Delete Holiday
0x02
Delete All
Add Holiday : Add New Holiday Information "Month_S/Day_S ~ Month_E/Day_E"
Delete Holiday : Delete one Holiday Information "Month_S/Day_S ~ Month_E/Day_E"
Delete All : Delete All Holiday Information.("Data2 ~ Data5" must be 0x00)
Month_S : In the one Holiday Information, Start month value to be set on TV/Monitor(1 ~ 12)
Day_S : In the one Holiday Information, Start day value to be set on TV/Monitor(1 ~ 31)
Month_E : In the one Holiday Information, End month value to be set on TV/Monitor(1 ~ 12)
Day_E : In the one Holiday Information, End day value to be set on TV/Monitor(1 ~ 31)
̻
Ack
Command Data Length Ack/Nak r-CMD
0xFF
0x07
'A'
0xA8
Val 1
Management
command
Val 2
Month_S
Val 3
Day_S
Val 4
Month_E
Val 5
Check
Day_E Sum
Val 1 ~ Val 5 : Same as above
̻
Nak
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'N'
0xA8
ERR
Check
Sum
ERR : Error Code that shows the type of the error that occurred
XX\
96) Holiday Get Control
̻
Function
The Computer get Holiday List of TV/Monitor
This function is only available in EXn, MXn-3,DXn-3,TSn-3,UXn-3,UTn-2,UVn model
(It is dependent on Product Specifications.)
̻
Get Total Number of Holiday
Request Total number of Holiday information of TV/Monitor
Command Data Length
0xA9
̻
0
Get Holiday Date
Command
Data Length
Data 1
0xA9
0x01
Index
Index : Index value on Holiday List
̻
Ack
Command Data Length Ack/Nak
0xFF
0x07
'A'
r-CMD
Val 1
0xA9
Val 2
Index
Month_S
Val 3
Day_S
Val 4
Month_E
Val 5
Day_E
Check
Sum
Rule of Ack Command.
̻
Command
Type
Index(Ack)
Month_S(Ack)
Day_S(Ack)
Month_E(Ack)
Day_E(Ack)
Get Number
of Holiday
Total number
Ox00
Ox00
Ox00
Ox00
Get Holiday
Date
(If there is
holiday
Information)
Month_S
Day_S
Month_E
Day_E
Index
(Index's data)
(Index's data)
(Index's data)
(Index's data)
Get Holiday
Date
(If there is no
holiday
Information)
Index
0xFF
0xFF
0xFF
0xFF
Nak
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'N'
0xA9
ERR
Check
Sum
ERR : Error Code that shows the type of the error that occurred
XX]
97) MagicInfo PIP (MagicInfo Only)
̻
Function
The Computer turns the PIP function ON/OFF at MagicInfo.
This function is not available in CXn, MXn, EXn model
̻
Get MagicInfo PIP status
None
̻
Set MagicInfo PIP On - (Data in Red font is for model 460Txn)
Command Data Length
0xE0
0x0C
(0x13)
Data 6
Data 7
H Size
V Size
Low-Byte High-Byte
Data 14
PIP ON
Data 1
Data 2
Data 3
Data 4
Data 5
0x01
H Position
High-Byte
H Position
Low-Byte
V Position
High-Byte
V Position
Low-Byte
H Size
High-Byte
Data 8
Data 9
Data 10
Data 11 Data 11 Data 12
Data 13
V Size
Low-Byte
P.Source
TV
Channel
S.Select Country ATV/DTV
AirCable
Data 16
Data 17
Data 15
CH_NUM CH_NUM Sel_Minor Minor_CH
High_Byte
High_Byte Low_Byte
Data 18
Minor_CH
Low_Byte
H Position High-Byte : The Position value code for PIP H-Start High-Byte.
H Position Low-Byte : The Position value code for PIP H-Start Low-Byte.
V Position High-Byte : The Position value code for PIP V-Start High-Byte.
V Position Low-Byte : The Position value code for PIP V-Start Low-Byte.
H Size High-Byte : The Size value code for PIP H-width High-Byte.
H Size Low-Byte : The Size value code for PIP H-width Low-Byte.
V Size High-Byte : The Size value code for PIP V-width High-Byte.
V Size Low-Byte : The Size value code for PIP V-width Low-Byte.
Note : The PIP Start Position and Size do not over 1366 X 768 or 1920 X 1080
P.Source : The Input source Code
0x14
PC
0x1E
BNC
0x18
DVI
0x0C
AV
0x04
S-Video
0x08
Component
0x21
HDMI
0x30
TV
0x40
DTV
TV Channel : Channel Number (0~99) Note : 460Txn and EXn Only
S.Select : The Sound select Code
1
MagicInfo Sound
XX^
0
PIP Sound
Country : The value code for the country of the TV / Monitor (0 : Korea, 1: U.S.A, ...)
ATV_DTV : The value code for the ATV/DTV of the TV / Monitor (0 : Analog TV, 1: Digital TV)
AirCable : The value code for the Air/Cable of the TV / Monitor (0 : Air, 1: Cable)
CH_NUM High_Byte : The value code for the Major Channel High-Byte of the TV / DTV
(Analog TV : 1 ~ 135, Digital TV : 0 ~ 999)
CH_NUM Low_Byte : The value code for the Major Channel Low-Byte of the TV / DTV
(Analog TV : 1 ~ 135, Digital TV : 0 ~ 999)
Sel_Minor : The value code for the Minor Channel Enable/Disable of the TV / Monitor
(0 : Enable, 1 : Disable)(DTV Only)
Minor_CH High_Byte : The value code for the Minor Channel High-Byte of the TV / Monitor
(0 ~ 999)(DTV Only)
Minor_CH Low_Byte : The value code for the Minor Channel Low-Byte of the TV / Monitor
(0 ~ 999)(DTV Only)
̻
Ack(Data in Red font is for model 460Txn)
Command Data Length
0xFF
0x15
Ack/Nak
r-CMD
PIP ON
'A'
0xE0
0x01
Val 1
Val 2
H Position H Position
Low-Byte
High-Byte
Val 3
Val 4
V Position
Low-Byte
V Position
High-Byte
XX_
Val 5
Val 6
Val 7
Val 8
Val 9
H Size
Low-Byte
H Size
High-Byte
Val 13
Val 14
Val 15
Val 16
Val 17
Val 18
Val 19
ATV_DTV
AirCable
CH_NUM
High_Byte
CH_NUM
Low_Byte
Sel_Minor
Minor_CH
High_Byte
Minor_CH
Low_Byte
V Size
V Size
Low-Byte High-Byte P.Source
Val 10
Val 11
Val 12
TV
Channel
S.Select
Country
Check
Sum
H Position Low-Byte : Same as above
H Position High-Byte : Same as above
V Position Low-Byte : Same as above
V Position High-Byte : Same as above
H Size Low-Byte : Same as above
H Size High-Byte : Same as above
V Size Low-Byte : Same as above
V Size High-Byte : Same as above
XX`
P.Source : Same as above
TV Channel : Same as above
S.Select : Same as above
Country : Same as above
ATV_DTV : Same as above
CH_NUM High_Byte : Same as above
CH_NUM Low_Byte : Same as above
Sel_Minor : Same as above
Minor_CH High_Byte : Same as above
Minor_CH Low_Byte : Same as above
̻
Set MagicInfo PIP Off (Data in Red font is for model 460Txn)
Command Data Length
0xE0
̻
0x0C
0x13
0x00
Ack (Data in Red font is for model 460Txn)
Command Data Length
0xFF
̻
PIP Off
0x0E
0x15
Ack/Nak
r-CMD
PIP Off
'A'
0xE0
0x00
Ack/Nak
r-CMD
Val 1
'N'
0xE0
ERR
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
XYW
98) Panel ON/OFF
̻
Function
The Computer control ON/OFF status of Panel for TV/Monitor.
̻
Get Panel ON/OFF Status
Command Data Length
0xF9
̻
0
Set Panel ON/OFF
Command Data Length
0xF9
Data 1
1
Panel
Panel : Panel On/Off Code which will be set up into Monitor
̻
0
Panel On
1
Panel Off
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0xF9
Panel
Ack/Nak
r-CMD
Val 1
'N'
0xF9
ERR
Check
Sum
Panel : Same as above
̻
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
XYX
99) Ambient Brightness Mode
̻
Function
The Computer control ON/OFF status of Ambient Brightness Mode and status of Lamp Value during
operation of Ambient Brightness for TV/Monitor.
̻
Get Ambient Brightness Mode Status
Command Data Length
0xA1
̻
0
Set Ambient Brightness Mode, Set Lamp Value
Command Data Length
0xA1
3
Data 1
Data 2
Data 3
AB_Mode
Valid_LampValue
Lamp Value
AB_Mode : Value of Ambient Brightness which will be set up into Monitor
0
Ambient Brightness Mode Off
1
Ambient Brightness Mode On
Valid_LampValue : On/Off Code which will be set up into Monitor
0
Invalid Lamp Value(ignore)
1
Value Lamp Value(apply)
Lamp Value ‫ ڕ‬The value for Monitor. (0~100)
̻
Ack
Command Data Length
0xFF
5
Ack/Nak
r-CMD
'A'
0xA1
Val 1
Val 2
AB_Mode Valid_Lam
pValue
Val 3
Lamp
Value
Check Sum
AB_Mode, Valid_LampValue, LampValue : Same as above
If the Ack is for Get Ambient Brightness Mode, do like below.
̻
Input Type
AB_Mode
Valid_LampValue
LampValue
Get
same as above
same as AB_Mode
same as above
Nak
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'N'
0xA1
ERR
Check
Sum
ERR : Error Code that shows the type of the error that occurred
XYY
100) Fan Control
̻
Function
The Computer change the Fan Control for TV/Monitor.
̻
Get Fan Status
Command Data Length
0x8F
̻
0
Set Fan
Command Data Length
0x8F
Data 1
1
FAN
FAN : Value of Fan Control which will be set up into Monitor
̻
0
Fan Control Manual
1
Fan Control Auto
Ack
Command Data Length
0xFF
̻
3
Ack/Nak
r-CMD
Val 1
'A'
0x8F
FAN
Ack/Nak
r-CMD
Val 1
'N'
0x8F
ERR
Check Sum
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
XYZ
101) Gamma Control
̻
Function
The Computer change the Gamma Control for TV/Monitor.
̻
Get Gamma Status
Command Data Length
0x96
̻
0
Set Gamma
Command Data Length
0x96
1
Data 1
GAMMA
GAMMA : Value of Gamma Control which will be set up into Monitor
̻
0
Natural
1
Mode1
2
Mode2
3
Mode3
4
Custom
Ack
Command Data Length
0xFF
̻
3
Ack/Nak
r-CMD
Val 1
'A'
0x96
GAMMA
Ack/Nak
r-CMD
Val 1
'N'
0x96
ERR
Check Sum
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
XY[
102) Reset Control
̻
Function
The Computer reset the setting of menu for TV/Monitor.
̻
Get Status Not Available
Command Data Length
0x9F
̻
0
Set Reset
Command Data Length
0x9F
Data 1
1
RST
RST : Value of reset which will be set up into Monitor
̻
0
Picture Reset
1
Sound Reset
2
Setup Reset
3
Reset All
Ack
Command Data Length
0xFF
̻
3
Ack/Nak
r-CMD
Val 1
'A'
0x9F
RST
Ack/Nak
r-CMD
Val 1
'N'
0x9F
ERR
Check Sum
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
XY\
103) User Auto Color
̻
Function
The Computer change the setting of User Auto Color for TV/Monitor.
Operating only in PC, BNC source.
̻
Set User Auto Color
Command Data Length
0x45
1
Data 1
AutoColorCmd
Auto Color Cmd : Value of Auto Color Cmd which will be set up into Monitor
̻
0
Reset
1
Auto Color
Ack
Command Data Length
0xFF
̻
3
Ack/Nak
r-CMD
Val 1
'A'
0x45
AutoColor
Cmd
Ack/Nak
r-CMD
Val 1
'N'
0x45
ERR
Check Sum
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
XY]
104) Standby Control
̻
Function
The Computer change the setting of Standby Control for TV/Monitor.
Stanby Control Command can be set regardless of current source.
At this time, Standby Control affect only to PC/DVI/DHMI/DP(Display Port) Sources.
̻
Get Standby Setting
Command Data Length
0x4A
̻
0
Set Standby Setting
Command Data Length
0x4A
1
Data 1
StandbySetting
Standby Setting : Value of Standby Control setting which will be set up into Monitor
̻
0
Off
1
On
2
Auto
Ack
Command Data Length
0xFF
̻
3
Ack/Nak
r-CMD
Val 1
'A'
0x4A
StandbySetting
Ack/Nak
r-CMD
Val 1
'N'
0x4A
ERR
Check
Sum
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
XY^
105) Fan Speed Setting
̻
Function
The Computer change the Fan Speed Setting for TV/Monitor.
̻
Get Fan Speed
Command Data Length
0x44
̻
0
Set Standby Setting
Command Data Length
0x44
1
Data 1
FANSpeed
FAN Speed : Value of Fan Speed which will be set up into Monitor
0 ~ 100
̻
Fan Speed
Ack
Command Data Length
0xFF
̻
3
Ack/Nak
r-CMD
Val 1
'A'
0x44
FANSpeed
Ack/Nak
r-CMD
Val 1
'N'
0x44
ERR
Check
Sum
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
XY_
106) Video Picture Position & Size
̻
Function
The Computer change the Picture Position & Size setting of digital source for TV/Monitor.
Position
Reset
Up
Down
Left
Right
Up
Down
Left
Right
16:9
X
X
X
X
X
X
X
X
X
Zoom1
O
O
O
X
X
X
X
X
X
Zoom2
O
O
O
X
X
X
X
X
X
4:3
X
X
X
X
X
X
X
X
X
O
O
O
O
O
X
X
X
X
O
O
O
O
O
O
O
O
O
Screen
Fit
Custom
̻
Size
Set Digital Picture Position & Size
Command
Data Length
Data 1
Data 2
0x4B
2
Type CMD
Direction CMD
Type CMD : Value of Picture Position & Size which will be set up into Monitor
0
Reset
1
Position
2
Size
Direction CMD : Setting up the control direction when the value of Type CMD is Size or Position.
The Direction CMD could be ignored when the Type CMD is Reset.
̻
0
Down
1
Up
2
Left
3
Right
Ack
Command Data Length
0xFF
̻
4
Ack/Nak
r-CMD
Val 1
Val 2
'A'
0x4B
Type CMD
Direction CMD
Ack/Nak
r-CMD
Val 1
'N'
0x4B
ERR
Check
Sum
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
XY`
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement