Accessories Application

Accessories Application
Accessories
Application
The CCV-EXT-KIT can be used with most CCV’s* and PICCV in order
to achieve a large clearance over the pipe. The Extension Kit will
provide an additional 2” of space between the top of the valve and the
base of the actuator. bracket is made from aluminum and is not
intended as a thermal block.
– Extension kit will be automatically assembled with any
Flanged CCV assembly.
Available for Spring
g
and Non-Spring
Non Spring
Actuators
Technical Data
Extension Height
Total Weight
2"
0.7 lb
Material
Extension Housing
Shaft
Threaded Hardware
Bearing
Retaining Clip
Aluminum - Anodized
Stainless Steel
Stainless Steel
Oilite® Bearing
Stainless Steel
TR
Extension Bracket
CCV-EXT-Kit
●
LRB (X) ARB (X)
●
●
TF
LF
AF
●
●
●
M40059 - 07/10 - Subject to change. © Belimo Aircontrols (USA), Inc.
* Cannot be used with N4 actuators.
* Available for previous NF assemblies.
* CCV-EXT-KIT cannot be used with any valve smaller than the
B212(B) and B312(B).
2"
1.65"
1.65"
800-543-9038 USA
866-805-7089 CANADA
203-791-8396 LATIN AMERICA
93
Accessories
ZS-CCV... New Characterized Control Valve Weather Shield
Application
The ZS-CCV... weather shield provides moderate protection for valves
which are mounted outdoors. This product is designed as a water tight
enclosure. The housing allows easy mounting over the actuator, while
allowing easy viewing of the actuator in operation. Weather shield for
PICCV/CCV to provide protection for actuators in outdoor applications.
Part Number
ZS - CCV - 90
ZS - CCV - 100
Actuator
AF
LRB(X),
( ) ARX
Part Number
ZS - CCV - 90
ZS - CCV-100
L
16.25” [413]
[ ]
15.67” [398]
[ ]
PETG with UV resistant smoke tint
Silicon Rubber
Silicon Rubber
Stainless Steel
-22˚F to 122˚F ((-30˚C to 50˚C))
Aluminum
Galvaneal w/black powder coat
W
8.75” [222]
[ ]
7.61” [193]
[ ]
H
4.5” [114]
[ ]
4.0” [102]
[ ]
Parts List
Cover including Rubber Perimeter Gasket, Rubber Gasket
Back Plate
Anti-Rotation Post with screw and lock washer
Valve Gasket
Assorted Cap plugs for unused holes
Screws AF - 2 bolts with nylon insert locking nuts
LRB(X), ARX - 1 screw, 1 washer
No weather shield available at this time for the TF and TR actuators.
Designed for NEMA 4 specifications.
800-543-9038 USA
94
866-805-7089 CANADA
203-791-8396 LATIN AMERICA
M40059 - 07/10 - Subject to change. © Belimo Aircontrols (USA), Inc.
Specifications
Cover
Perimeter Gasket
Rubber Gasket
Spring Clips
Temperature limitations:
Plate (ZS-CCV-100)
(
)
Plate
Accessories
Auxiliary Switches S1A, S2A
For the non-spring return direct-coupled actuators
Application
The S1A and S2A auxiliary switches are used to indicate when a
desired position of a valve is reached or to interface additional
controls for a specific control sequence.
Operation
The S1A and S2A auxiliary switches are mounted onto the direct coupled
actuator. The switches are modular units that mount directly onto LR and
AR type actuators and are locked into place by guiding grooves on the
sides of the actuator.
M40059 - 07/10 - Subject to change. © Belimo Aircontrols (USA), Inc.
A driver disk is attached to the actuator handle and offers direct
transmission of the actuator position to the micro switch cams. The
switching points can be set over the full scale of 0 to 1 simply by
adjusting the slotted discs.
Types
S1A
S1A/300
S1A/500
1 SPDT
1 SPDT
1 SPDT
3 ft, 18 GA Appliance Cable
6 ft, 18 GA Appliance Cable
10 ft, 18 GA Appliance Cable
S2A
S2A/300
S2A/500
2 SPDT
2 SPDT
2 SPDT
3 ft, 18 GA Appliance Cable
6 ft, 18 GA Appliance Cable
10 ft, 18 GA Appliance Cable
Technical Data
Number of Switches
Weight
S1A
1 SPDT
4.6 oz [[130 g]]
Switching Capacity
Switching Point
Pre-Setting
Humidity
Ambient Temperature
Storage Temperature
Housing
Housing Rating
Servicing
Agency Listings
3A ((0.5A),
) 250 VAC
Adjustable over Full Rotation ((0° to 95°))
With Scale Possible
5 to 95% RH non-condensing
-22°F to 122°F [[-30°C to +50°C]]
-40°F to 176°F [[-40°C to 80°C]]
NEMA 2 / IP54
UL94-5VA
Maintenance Free
cULus acc. to UL60730-1
CE according to 73/23/EEC
ISO 9001
Quality Standard
Mounting Instructions
1. Press down the manual override button and rotate the actuator
fully counter clockwise.
2. Place the switch/potentiometer adaptor onto the hex shaft of the
handle which is in the center of the valve/actuator coupling.
3. Slide switch onto the actuator using the actuator guiding grooves
on the sides of the actuator.
4. Check for correct mating of the adaptor to the switch.
5. Adjust switch dials as necessary.
800-543-9038 USA
S2A
2 SPDT
6.0 oz [[170 g]]
Wiring Diagram
866-805-7089 CANADA
203-791-8396 LATIN AMERICA
95
Accessories
Feedback Potentiometer P...A
For the non-spring return direct-coupled actuators
Application
The P…A feedback potentiometers are used with LR and AR actuators
to provide a resistive signal which varies with valve position.
The P…A units are applied with commercial proportional temperature
controllers to provide feedback of the valve position, or with electric or
electronic meters to provide position indication. The signal can also be
used as a positioner for parallel operation of multiple actuators.
Operation
The P…A feedback potentiometers are mounted onto the direct coupled
actuator. The switches are modular units that mount directly onto LR and
AR type actuators and are locked into place by guiding grooves on the
sides of the actuator.
A driver disk is attached to the actuator handle and offers direct
transmission of the actuator position to the micro switch cams.
Technical Data
Resistance Values
Output
Tolerance
Linearity
Resolution
Residual Resistance
Electrical Connection
Humidity
Ambient Temperature
Storage Temperature
Housing
Housing Rating
Servicing
Agency Listings
Mounting Instructions
1. Press down the manual override button and rotate the
actuator fully counter clockwise.
2. Place the switch/potentiometer adaptor onto the hex shaft of the
handle which is in the center of the valve/actuator coupling.
3. Slide switch onto the actuator using the actuator guiding grooves
on the sides of the actuator.
4. Check for correct mating of the adaptor to the switch.
5. Adjust switch dials as necessary.
800-543-9038 USA
96
Quality Standard
Weight
Feedback Potentiometer
Feedback Potentiometer
Feedback Potentiometer
Feedback Potentiometer
Feedback Potentiometer
Feedback Potentiometer
Feedback Potentiometer
140 Ω
200 Ω
500 Ω
1000 Ω
2800 Ω
5000 Ω
10000 Ω
P...A
As Above
1W
± 5%
± 2%
Min. 1%
max. 5% On Both Sides
3 ft, 18 GA Appliance Cable
½" Conduit Connector
5 to 95% RH non-condensing
-22°F to 122°F [[-30°C to 50°C]]
-40°F to 176°F [[-40°C to 80°C]]
NEMA 2 / IP54
UL94-5VA
Maintenance Free
cULus acc. to UL60730-1
CE according to 73/23/EEC
ISO 9001
4.6 oz [[130 g]]
Wiring Diagram
866-805-7089 CANADA
203-791-8396 LATIN AMERICA
M40059 - 07/10 - Subject to change. © Belimo Aircontrols (USA), Inc.
Types
P140A
P200A
P500A
P1000A
P2800A
P5000A
P10000A
Wiring Accessories
Protective Terminal Cover
For the non-spring return direct-coupled actuators
Application
Belimo non-spring return actuators with terminal strips are can be
converted from NEMA 1/IP20 to NEMA 2/IP54 using the protective
terminal cover ZS-T.
The ZS-T terminal cover accessory consists of:
• Terminal Cover
• Conduit Fitting
• Rubber Seal for Wire Diameter 4-6
• Rubber Seal for Wire Diameter 6-8
Terminal
Cover
Conduit
Fitting
Rubber
Seals
Mounting the Terminal Cover
1. Attach terminal cover to actuator, if not done already.
2. Slide the conduit fitting and correct size rubber seal onto wire.
3. Wire up actuator using the terminal strips.
M40059 - 07/10 - Subject to change. © Belimo Aircontrols (USA), Inc.
4. Fit rubber seal into slot of terminal cover.
5. Shut terminal top and screw on conduit connector.
800-543-9038 USA
866-805-7089 CANADA
203-791-8396 LATIN AMERICA
97
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement