Product Datasheet - [Download RVL2255]

Product Datasheet - [Download RVL2255]
See clearly behind your vehicle with this
simple to fit, reverse camera kit.
Ideal for 12 Volt Cars, Utes, Vans, Buses, Motorhomes, Trucks, etc.
The design of some vehicles means that vision to the rear is either significantly restricted, or non existent. Whether
in tight parking spaces, difficult terrain, or just reversing down the drive, reversing always involves the possibility of
damaging one’s own vehicle, other property, or even worse!
Power Train reverse systems have been tried and tested in thousands of applications globally on a wide range
of vehicles such as commercial vehicles, recreational vehicles, construction machinery, agricultural vehicles,
emergency service vehicles and many more...
All of our reversing camera systems have colour cameras, modern colour TFT flat panel monitors and come with
all the cables and brackets necessary to complete an installation, together with full installation and operating
The RVC900-1 is easily clipped to the inernal rear view mirror and acts as a normal rear view mirror until the
vehicle is put into reverse, then a 4.3” Display apears in the middle of the mirror to alow you to see the view from
the camera.
This unit can also be connected to an optional DVR recorder (Not included) like the Powertrain DVR100 to view
DVR recordings.
When you need to see what is behind you, A Powertrain reverse camera system is the ideal choice and provides a
safer alternative to relying solely on side mirrors.
• The RVC900-1 features a 4.3”, 16:9 anti-glare LCD
screen built into a rear view mirror and is suitable for
connecting to 12 or 24 Volt electrical systems. The
screen is easily attached to normal interior rear view
• Also included in this kit is a high quality wide angle
weatherproof camera to provide a clear and crisp
Model No:
Operating Voltage
Display Mode
Screen Size
RVL2255 (RVC900-1)
12 or 24 Volt DC
16:9 LCD
Horizontal Viewing Angle
100 Degrees
Virtical Viewing Angle
170 Degrees
Camera Type
CCD, Colour
Cable Length
10 Metres
Camera Rating
Available from
• Complete with a 10 metre high quality low interference
cable, and all required cable connectors
• This unit can be connected to an option DVR
Recorder. (Not included)
• Simple solder free plug and play wiring connections.
Simply plug the camera to 10M cable and the monitor
to the cable, then only 2 other wires to connect. The
easy mount camera bracket just slips over the number
plate. Making it easy for DIY installation, saving you the
hassle and expense of professional installation.
See simple connection guide below.
Easy to connect
Turn on when in reverse gear
Black - to Negative (-) of
Reverse light.
Red - to Postive (+) of reverse light
} Not used unless DVR connected
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF