Century Farm Duty Motor Brochure

Century Farm Duty Motor Brochure
Farm Rated® Motors
1401D
A Regal Brand
Table of Contents
Aeration Fan Motors
Single Phase – Capacitor Start – TEAO – Rigid Base
Three Phase – TEAO – Rigid Base .....................................................................................................1
Air Compressor Motors
Single Phase – ODP – Rigid Base
Three Phase – ODP – Rigid Base
Single Phase – OEM Replacement – Capacitor Start – ODP – Rigid Base ....................................2
Auger Drive Feed Line Motors
Single Phase – Capacitor Start – Three Phase – TEFC/TENV – No Base ........................................3
Centrifugal Fan Motors
Single Phase – Three Phase – ODP – Rigid Base ...........................................................................3
Cow Cooler Motors
Single Phase – Capacitor Start – Single Speed – TEAO – Rigid Base
Single Phase – Capacitor Start – Two Speed – TEAO – Rigid Base ...............................................4
Crop Dryer Motors
Single Phase – Permanent Split Capacitor – OAO – Rigid Base
Single Phase – Permanent Split Capacitor – TEAO – Rigid Base
Three Phase – TEAO – Rigid Base .................................................................................................4
Farm Building Belted Ventilation Motors
Single Phase – Split Phase – TEAO – Resilient Base
Single Phase – Capacitor Start – TEAO – Resilient and Rigid Base ...............................................5
Farm Building Direct Drive Ventilation Fan Motors
Single Phase – Permanent Split Capacitor – TEAO – Resilient Base
Single Phase – Permanent Split Capacitor – OAO/TEAO – Resilient and Rigid Base
Single Phase – Split Phase – OAO – No Base
Single Phase – Permanent Split Capacitor – TEAO – Rigid Base ...................................................6
Farm Rated Motors
Single Phase – Capacitor Start – TEFC – Rigid Base
Single Phase – Capacitor Start – TEFC – Rigid Base – C-Face
Single Phase – High Torque – TEFC – Rigid Base ..........................................................................7
Single Phase – Extra High Torque – TEFC – Rigid Base
Single & Three Phase – Extra High Torque – TEFC – Rigid Base – C-Face.....................................8
Grain Stirring Motors
Single Phase – Capacitor Start – TEFC – Rigid Base......................................................................9
Instant Reverse & Grain Stirring Motors
Single Phase – Capacitor Start – Solid State Switch – TEFC – Rigid Base .....................................9
Milk Pump Motors
Single Phase – Permanent Split Capacitor – Three Phase – TENV – Rigid Base
PMDC – 95-Volt – Zero Tank Replacement – TENV – No Base ...................................................10
Pedestal Fan Motors
Single Phase – Permanent Split Capacitor/Split Phase – TE/ODP – Yoke Mount .........................11
Poultry Duty Motors
Single Phase – TEAO – Rigid/Resilient Base ................................................................................12
Pressure Washer Motors
Single Phase – ODP – Rigid Base
Single Phase – ODP – C-Face End Bracket
Single Phase – TEFC – C-Face End Bracket .................................................................................13
Three Phase Motors
Three Phase – TEFC – Rigid Base ................................................................................................14
General Purpose IHP Motor Dimensions
Single and Three Phase 143T-449T .............................................................................................15
NEMA Frame Assignments .................................................................................................16
Pulley Speed Chart ................................................................................................................17
Cross Reference .......................................................................................................................18
Catalog Number Index ...................................................................................... 21
Fraction/Decimal/Millimeter Conversions.................................................................23
Statement of Warranty Policy .................................................................Inside Back Cover
Aeration Fan Motors by Century®
Fan Duty Only – Single & Three Phase – Totally-Enclosed Air-Over
Rigid Base – 3600 RPM – 1/2 thru 3-4 HP
Features: • Ball Bearings • Class B Insulation • 60 Hz • Service Factor 1.0 • 40°C Ambient • Reversible
Applications: Direct replacement for many OEM models.
HP
RPM
Volts
Full Load
Amps
Frame
B221
Stock
Number
Wt.
Shaft Diameter
and Length
Overload
Protector
“C”
Dim.
Notes
Single Phase
1/2
3600
115/230
6.4/3.2
48Z
B666
20
1/2” X 2”
Auto
10.4
14,45
1/2
3600
115/230
5.8/2.9
56
B220
22
5/8” X 1-7/8”
Auto
11.1
70
3/4
3600
115/230
8.0/4.0
56
B221
28
5/8” X 1-7/8”
Auto
11.4
70
1
3600
115/230
9.2/4.6
56
B222
31
5/8” X 1-7/8”
Auto
12.2
70
70,182
3600
230
6.5
143T
K117
34
7/8” X 2-1/4”
Auto
12.6
2
3600
230
8.4
145T
K118
36
7/8” X 2-1/4”
Auto
13.1
70,182
3-4
3600
230
12.4-17.0
145T
K112
39
7/8” X 2-1/4”
Thermostat
13.8
5,116,182,$
3
3600
230
15.4
145T
K116
44
7/8” X 2-1/4”
Thermostat
13.8
70,116,182
56
H041
24
5/8” X 1-7/8”
None
11.1
Three Phase
3/4
3600
208-230/460
2.6-2.4/1.2
1
3600
208-230/460
2.8-2.7/1.35
56
H042
28
5/8” X 1-7/8”
None
11.1
1-1/2
3600
208-230/460
4.4-4.2/2.1
143T
R180
31
7/8” X 2-1/4”
Thermostat
12.1
2
3600
208-230/460
7.1-6.8/3.4
145T
R181
35
7/8” X 2-1/4”
Thermostat
12.1
116,182
3-4
3600
230/460
8.4/4.2
145T
R155
34
7/8” X 2-1/4”
Thermostat
12.1
116,177,182
116,182
Notes:
5. $ Energy efficient two value capacitor start
capacitor run motor
14. Totally enclosed, non-ventilated
45. Capacitor start
70. Permanent split capacitor
116. Temperature sensitive thermostat with two leads for connection to external control
177. Meets the requirements of the Energy Policy Act of 1992
182. Locked bearing on drive end
www.centuryelectricmotor.com
1
Aeration Fan Motors by Century®
1-1/2
Air Compressor Motors by Century®
OEM Special Replacements – Dripproof – Rigid Base – Single Phase
Capacitor Start/Capacitor Run
Features:
B385
Non-Reversible–Connected for CW Facing End Opposite Shaft • Energy Efficient $ • 60 HZ • 40˚C Ambient • Class B Insulation • Manual Protector
HP
RPM
Full Load
Amps
Volts
Service
Factor
Stock
Number
Frame
“C”
Dim.
Wt.
Notes
2SPL
3600
115/230
15.0/7.5
1.0
56
B381
27
11.3
$
2SPL
3600
115/230
15.0/7.5
1.0
56
B383
30
11.6
$
2SPL
3600
208-230
15.0
1.0
56
B385
37
12.6
$
Air Compressor Motors by Century®
Rigid Base – 3600 & 1800 RPM – 1/2 thru 6 HP Single Phase
Features:
• Ball Bearings • Continuous Duty
• 60 Hz • Rigid Base
• Class B or F Insulation
• Open Construction
• 40˚C Ambient
CP1152L
B813
Applications: Designed for air compressor loads. May be suitable for other applications having similar loads.
HP
RPM
Volts
Full Load
Amps
Service
Factor
Frame
Stock
Number
Overload
Protector
Rotation
Wt.
“C”
Dim.
Efficiency
Notes
1/2
3600
115/230
9.6/4.8
1.00
56
B685
Manual
CWLE
18
11.0
233
3/4
3600
115/230
12.5/6.75
1.00
56
CP1072L
Manual
REV
24
10.6
233
1
3600
115/230
12.0/6.0
1.00
56
CP1102L
Manual
REV
26
11.4
233
1/2
3600
115/230
12.5/6.3
1.00
56
CP1152L
Manual
REV
32
11.9
85,$,233
2
3600
115/230
22.2/11.1
1.00
56
CP1202L
Manual
REV
32
12.7
233
3
3600
208/230
13.1/12.3
1.00
56
CP1302L
Manual
REV
33
12.7
3
1800
115/230
34.0/17.0
1.15
184T
V201M2
None
REV
78
14.2
5
3600
230
19.7
1.00
56HZ
CP1502L
Manual
REV
44
14.1
5
3600
230
22.0
1.00
56HZ
B813
Manual
CWLE
45
14.1
85,$,233
5
3600
208-230
22.0
1.15
56HZ
B386
Manual
CWLE
37
14.6
85,$,233
85,$,233
77.0
233
15,85,$,233
5
3600
208-230
22.0
1.15
56Y
B384
Manual
CWLE
50
14.6
5
3600
230
25.6
1.15
184T
V211M2
None
REV
82
16.2
77.0
233
5
1800
230
22.0
1.15
184T
V208M2
None
REV
84
16.2
82.0
85,$,87
6
3600
230
24.0
1.00
56Y
B387
Manual
CWLE
53
14.6
85,97,298,$,233
SPL
3450
230
15.0
1.00
56H
CP1502LV1
Manual
REV
37
12.8
85,180,$,233
85,97,320,$,233
Notes:
15.
85.
87.
97.
180.
56HZ = 7/8” x 2-1/4” Shaft
Energy efficient $ - capacitor start/run
Class F insulation
182T and 184T mounting holes, 4.5” shaft height
Low AMP replacement for a variety of O.E.M. “Special” and “SPL 5”
horsepower requirements
233. Class B insulation
298. 2-1/4” x 7/8” keyed shaft
320. 56Y = 7/8” diameter keyed shaft, 2.25” long
2
www.centuryelectricmotor.com
Auger Drive Feed Line Motors by Century®
Direct Drive – Capacitor Start – Totally Enclosed Fan Cooled
No Base – 1800 RPM – 1/3 thru 1-1/2 HP
Features:
• Single & Three Phase
• New “N” Flange Bracket
• High Starting Torque
• Service Factor 1.0
• Torque Switch and Governor
• Reversible
• Manual Reset
• Double Sealed Ball Bearing
• Class B Insulation
• 60 Hz
C332
• 40°C Ambient
Applications: Designed for direct drive poultry and swine auger feeding systems.
Full Load
Stock
Amps
Frame Number
Base/
Mounting
Enclosure
Shaft Dia.
& Length
Insulation Overload
Class
Protector Rotation
“C”
Dim Notes
Single Phase
1⁄3
1725 115/230 5.5/2.856NC330
1⁄21725 115/230 7.2/3.6 56NC331
3⁄4
1725 230/115 5.2/10.456NC332
1 1725 230/115 6.0/12.056NC333
1 1⁄2 1725 230/115 6.6/13.256NC340
Round
Round
Round
Round
Round
Frame
Frame
Frame
Frame
Frame
TENV
TEFC
TEFC
TEFC
TEFC
1⁄2” x 1-3/4”
1⁄2” x 1-3/4”
1⁄2” x 1-3/4”
5⁄8” x 2.10”
5⁄8” x 2.10”
B
B
B
B
B
Manual
Manual
Manual
Manual
Manual
RCC
RCC
RCC
RCC
RCW
9.6
12.4
12.4
13.3
14.5
Round
Round
Round
Round
Round
Frame
Frame
Frame
Frame
Frame
TENV
TEFC
TEFC
TEFC
TEFC
1⁄2” x 1-3/4”
1⁄2” x 1-3/4”
1⁄2” x 1-3/4”
5⁄8” x 2.10”
5⁄8” x 2.10”
B
B
B
B
B
Manual
Manual
Manual
Manual
Manual
RCC
RCC
RCC
RCC
RCC
8.99
10.78
10.78
11.76
12.01
Three Phase
1⁄3
1⁄2
3⁄4
1
1 1⁄2
1725
1725
1725
1725
1725
208-230/4601.2-1.2/.06
208-230/4601.7-1.7/0.85
208-230/4602.4-2.4/1.2
208-230/4603.1-3.0/1.5
208-230/4604.4-4.2/2.1
56N
56N
56N
56N
56N
C345
C346
C347
C348
C349
NEW!
NEW!
NEW!
NEW!
NEW!
Centrifugal Fan Motors by Century®
Single & Three Phase – Dripproof – Rigid Base – 1800 RPM – 5 thru 30 HP
Features:
• Ball Bearings
• 60 Hz
• Class B or F Insulation • Reversible
• 40°C Ambient
• Service Factor 1.15
E219M2
Applications: Centrifugal fans and blowers, barn coolers, poultry house coolers, livestock and poultry house temperature control.
HP
RPM
Volts
Full Load
Amps
Frame
Single Phase Capacitor Start Capacitor Run
Stock
Number
Type
Shaft Dia.
& Length
51745 230 22.0 184T
V209M2 1-1/8” x 2-7/8”
7 1⁄21750230/46032.0/16.0 215TV305M2
1-3/8” x 3-1/2”
10 1750230/46038.0/19.0 215TV303M2
1-3/8” x 3-1/2”
Three Phase
5
1760230/460 13.6/6.8
7 1⁄21760230/460 19.4/9.7
10 1755230/46025.2/12.6
15 1770230/46037.8/18.9
20 1765230/46049.0/24.5
25 1765230/46061.0/30.5
30 1765230/46073.2/36.6
Notes:
184TE219M2
213TE317M2
215TE397M2
254TE451M2
256TE407M2
284TE514M2
286TE516M2
$ Energy Efficient $
5. $ Energy efficient two value capacitor start, capacitor run motor
8. NEMA design A
23. Suitable for 200/400 volt and 50 HZ
80. Large capacitor/terminal box construction
J
J
J
J
J
J
J
E+3
E+3
E+3
E+3
E+3
E+3
E+3
1-1/8” x 2-3/4”
1-3/8” x 3-3/8”
1-3/8” x 3-3/8”
1-5/8” x 4”
1-5/8” x 3-3/4”
1-7/8” x 4-3/8”
1-7/8” x 4-3/8”
Insulation
Class
Rotation
“C”
Dim. Efficiency Notes F
B
F
REV16.282.0 5,$
REV
18.1
86.0
5,80,$
REV
19.6
86.5
5,80,$
F
F
F
F
F
F
F
CCW
CCW
CCW
CCW
CCW
CCW
CCW
14.2
17.5
17.5
22.1
22.1
24.3
25.8
89.5
91.7
91.7
93.0
93.6
93.6
94.1
8
8
23
23
Motors specially designed, tested and warranted
to be Corona-Free for compatible inverter duty
are marked on this page with a J.
Published efficiency on tri-voltage rated motors
applies at 230/460 volts.
Performance at 200 or 208 volts may not be in
accordance with NEMA standards.
www.centuryelectricmotor.com
3
Auger Drive & Centrifugal Fan Motors by Century®
HP
RPM
Volts
Cow Cooler Motors by Century®
Features:
• Ball Bearings
• Capacitor Start Capacitor Run
• Class B Insulation
• Low Starting Torque
• Reversible
• Rigid Base
• Service Factor 1.0
• Single Phase
• Totally Enclosed, Air Over
• 1 thru 1.5 / .44 HP
• 40°C Ambient
• 60 Hz
• 1800 & 1800/1200 RPM
• Energy Efficient $
C594
Applications: Environments requiring air movement.
HP
RPM
Volts
Full Load
Amps
Frame
Stock
Number
Wt.
Overload
Protector
“C”
Dim.
Notes
Cow Cooler & Crop Dryer Motors by Century®
Single Speed
1 1-1⁄2
1800
1800
115/230
115/230
9.6/4.8
17.0/8.5
56H
56H
C593
38 Manual12.69 $
C59438Manual 12.69
$
11.4/6.4
5.3/3.0
15.6/9.1
7.4/4.4
56H
56H
56H
56H
C59635Manual
C59735Manual
C59543Manual
C59845Manual
Two Speed
1.0~.29
1.0~.29
1.5~.44
1.5~.44
1800/1200115
1800/1200230
1800/1200115
1800/1200230
12.69
12.19
13.94
13.19
181,$
181,$
181,$
181,$
Notes:
31. 40 degree C ambient
181. Loose lead construction
Crop Dryer Motors by Century®
R243M2
Direct Drive Only – Single & Three Phase – Dripproof Air-Over & Totally
Enclosed Air-Over – Rigid Base – 3600 & 1800 RPM 5-7 thru 10-14 HP
Features:
• Ball Bearings
• 60 Hz
• 50°C Ambient
• Class F Insulation
• Service Factor 1.0
• Reversible
• Winding Thermostats • Moisture Resistant
• Rust-Resistant Rotor
• Switchless Design
• Long Leads
• Copper Wire Wound
• Shaft Drilled & Tapped in End
Applications: For tubeaxial and vaneaxial direct drive dryers.
HP
RPM
Volts
Full Load
Amps
Frame
Stock
Number
Wt.
Shaft Diameter
and Length
“C”
Dim.
Efficiency
84
91
125
146
138
1-1/8”
1-1/8”
1-1/8”
1-3/8”
1-1/8”
4-1/2”
4-1/2”
4-1/2”
5-1/2”
4-1/2”
17.9
16.9
19.1
21.3
20.4
81.0
82.0
84.4
83.0
86.5
118
1-1/8” x 4-1/2”
17.4
83.5
75
70
109
1-1/8” x 4-1/2”
1-1/8” x 4-1/2”
1-1/8” x 4-1/2”
15.4
84.0
17.484.0
20.088.0
Notes
Single Phase • Permanent Split Capacitor • Open Dripproof Air-Over
5-7
3600
7-10.53600
7.5-10.5
3600
10-12
1800
10-14
3600
200-230
200-230
200-230
230
200-230
32.0-28.0
184TZ
K220M2
48.0-41.0184TZK221M2
43.0-38.0
215TZ
K320M2
40.0-48.0
215TZ
K327M2
57.0-52.0
215TZ
K321M2
x
x
x
x
x
31
Single Phase • Permanent Split Capacitor • Totally Enclosed Air-Over
7-10.53600
200-230
45.0-40.0184TZK236M2
Three Phase • Totally Enclosed Air-Over
5-7
3600
208-230/460 19.0-17.0/8.5184TZ R244M2
7-10.5 3600
208-230/460 27.0-25.0/12.5184TZ R243M2
10-14 3600
230/460
36.0/18.0215TZR327M2
Notes:
31. 40 degree C ambient
4
www.centuryelectricmotor.com
Farm Building Belted Ventilation Motors by Century®
Features:
• Automatic Reset Overload Protector
• Class B Insulation • Resilient & Rigid Base
• Double Sealed Ball Bearings • Extended Thru-Bolts 3⁄4” Past Nut
• Reversible
• Single Phase
• Split Phase & Capacitor Start Capacitor Run
• Totally Enclosed Air Over • 1/3 thru 1 HP
• Service Factor 1.0
• 1800 RPM
• Energy Efficient $
• 40°C Ambient
• 60 Hz
C580
Applications: Designed for dirty environments such as poultry houses, barns, etc. fan & belted fan only.
Farm Building Belted Ventilation Motors by Century®
Full Load
Stock
“C”
HP RPM
Volts
Amps FrameNumber Wt.
Base Dim.
Notes
SPLIT PHASE
1/3 1800 230/115 2.2/4.448ZF500L
1/2 1800 230/115 3.5/7.056Z F501
1/21800230/115 3.5/7.0 56 F502
13
Cushion11.21
24
Cushion11.07
25 Cushion11.07
141
141
CAPACITOR START CAPACITOR RUN
1/21800115/230 6.4/3.2 56 C588
1/21800230/115 3.2/6.4 56 C580
3/4
1800
230/115
3.6/7.2
56
C581
1 1800230/115 4.8/9.6 56 C582
1 1725/1425230/1154.3/8.6//5.2/10.4
56 C782RB
33 Cushion11.44
$
30 Rigid11.44
$
35 Rigid11.94
$
39 Rigid12.44
$
41 Removable
12.20
6,$ New!
Notes:
6. 60/50 HZ
141. Shaft diameter is 1/2”, N=1.94” with .04” deep flat 1.88” long
312. 1.40 Service Factor
www.centuryelectricmotor.com
5
Farm Building Direct Drive Ventilation Fan Motors by Century®
Farm Building Direct Drive Ventilation Fan Motors by Century®
Features:
• Auto Protector
• Class B Insulation
• Direct Drive
• Double Sealed Ball B earings
• Extended 10-32 Thru-bolts 3/4” Past Nut
• Fully Gasketed
• Reversible
• Service Factor 1.0
• Single Phase
• 60 Hz
• 40°C Ambient
• Totally Enclosed, Air Over
C783
C048
C039A
C042A
C043A
C044A
C045A
Applications: Designed for farm air movement applications.
F683, F684
Full Load
Stock
HP RPM SpeedsVolts
Amps Frame NumberWt. Shaft
RESILIENT BASE
1/41700
1/41100
1/41100
1/31725
1/31100
1/21700
1/21100
1/2 900
1/2 900
1 115/230
1 115/230
2 115
1 115/230
1 115/230
1 115/230
1 115/230
1115/230
1115/230
1/31800 1
1/31800/900 2
THRU BOLT MOUNT (10-32 UNF-2A)
RIGID BASE
1
900
1
115
115
230
3.4/1.7
4.0/2.0
3.4
3.6/1.8
4.2/2.3
5.5/2.8
6.5/3.25
7.1/3.6
6.6/3.3
48Z
48Z
48Z
48Z
48Z
48Z
48Z
48Z
56Z
4.8
5.5/3.1
56Z F683
56Y
F684
5.1
56CZ
C042A
C045A
C059A
C043A
C046A
C044A
C047A
C039A
C048
C783
“C”
Dim.
C046A
C047A
C059
C059A
Notes
19
16
17
20
18
24
23
21
33
1/2 x 3-1/8
1/2 x 3-1/4
1/2 x 3
1/2 x 3-1/8
1/2 x 3-1/4
1/2 x 3
1/2 x 3-1/8
1/2 x 2-1/2
5/8 x 2-1/2
10.1
9.3
10.1
10.1
10.0
11.0
11.1
11.0
12.1
70,132,133
70,132,133
70
70,132,133
70,132,133
70,132,133
70,132,133
70,132,133
70,134
25
27
1⁄2 x 2
1⁄2 x 2
11.12
11.12
62
62
44
5⁄8 x 3-1⁄4
14.22
6,44,70
Notes:
6. 60/50 Hertz
44. CCWLE rotation only
62. Split Phase
70. Permanent Split Capacitor
132. Shaft sleeve and key supplied for 5/8” diameter
133. Shaft N-W = 2.50” with two flats .04 deep, 2.16” long, 90° apart
134. Shaft N-W = 2.50” with 5⁄8” diameter and keyway
6
www.centuryelectricmotor.com
Farm Rated Motors by Century®
Single Phase – Capacitor Start – Totally-Enclosed Fan-Cooled
Rigid Base and Rigid Base with C-Face – 1800 RPM – 1/3 thru 2 HP
Features:
• High Starting Torque
• 60 Hz
• Ball Bearings
• Reversible
• Class B Insulation • 40°C Ambient
• Bearings Lubricated with Low Temperature Grease
C312
Applications: Fans and blowers, feed lot conveyors, liquid manure spreaders, unloaders, compressors, storage bin conveyors.
Capacitor Start Enclosed Rigid Base Motors
Industrial and Farm Duty Applications
Features:
• Ball Bearing
• Continuous Duty
• Reversible
• 60 HZ
• Capacitor Start
• Energy Efficient $
• 40˚C Ambient
• 3450, 1725 & 1140 RPM
K100
Applications:
Compressors, conveyors, machine tools, pumps, air conditioning. Special service motors: air circulating fans, evaporative coolers, home workshops.
HP RPM
Volts
1⁄2 3450115/208-230
1/2 1725115/208-230
1/2 1725115/208-230
3⁄4 3450208-230/115
3/4 1725208-230/115
3/4 1725208-230/115
1 3450208-230/115
1 3450208-230/115
1 1725208-230/115
1 1725208-230/115
1 1725115/208-230
1-1⁄2 3450208-230/115
1-1⁄2 1725208-230/115
1-1⁄2 1725208-230/115
2 3450208-230/115
Notes:
Full Load
Service
Amps
Factor Frame
7.4/3.7-3.7
1.15
56
7.2/3.5-3.6
1.15
56
7.2/3.5-3.6
1.15
56
5.0-4.6/9.2
1.15
56
5.4-5.2/10.4 1.15
56
5.4-5.2/10.4 1.15
56
6.1-6.0/12.0 1.15
56
6.1-6.0/12.0 1.15
56
7.2-7.5/15.0 1.15
56
6.2-6.0/12.0 1.15
56
15.0/7.7-7.5 1.15 143T
8.3-8.0/16.0 1.15
56
7.7-7.5/15.0 1.15 56H
7.8-7.5/15.0 1.15 56H
9.1-8.4/16.6 1.15 56H
Stock
Number Wt.
B621
25
C612
28
C613
28
B664
30
C669
33
C671
33
B674
33
B695
32
C683
34
C685
37
K100
37
B762
35
C693
44
C686
45
B697
40
Overload
Approx.
Dim
Protector
“C” “AG”Enclosure Notes
None 11.29.3TEFC 233
None 12.210.3TEFC 233
Auto 12.210.3TEFC 43
None 12.210.3TEFC 233
None 12.610.7TEFC 233
Auto 12.610.7TEFC 233
None 12.210.3TEFC 233
Manual 12.210.3TEFC 233
None 13.411.4TEFC 233
Auto 13.411.4TEFC 233
None 13.711.4TEFC 233
None 12.710.7TEFC 233
None
13.9 11.9 TEFC85,$,233
Auto
13.9 11.9 TEFC85,$,233
Manual 14.4 12.4 TEFC85,$,233
5. $ Energy Efficient two value capacitor start capacitor run motor
14. Totally enclosed non-ventilated
43. Class A insulation
85. Energy efficient $ - capacitor start/run full load amps listed at 60 Hz
233. Class B insulation
Shaft Dimensions
56 = 5/8” Keyed x 1-7/8”
56H = 5/8” Keyed x 1-7/8”
143T/145T = 7/8” Keyed x 2-1/4”
182T/184T = 1-1/8” Keyed x 2-7/8”
213T/215T = 1-3/8” Keyed x 3-1/2”
www.centuryelectricmotor.com
7
Farm Rated Motors by Century®
Full Load
ServiceStock
Overload
“C”
HP
RPM
Volts
Amps
Factor
Frame
Number
Wt.
Protector
Dim.
Notes
1⁄3
1800 115/2305.2/2.6 1.25
56
C310
27
Manual11.1 14
1⁄3
1800 115/2305.2/2.6 1.25 56C C310C
29
Manual11.1 14
1⁄2
1800 115/2307.2/3.6 1.25
56
C311
28
Manual12.2
1⁄2
1800 115/2307.2/3.6 1.25 56C C311C 30Manual 12.2
3⁄4
1800 230/1155.2/10.4 1.15
56
C312
32
Manual12.6
3⁄4
1800 115/23010.4/5.2 1.15
56C C312C 34Manual 12.6
1
1800 230/1156.0/12.0 1.15
56
C313
36
Manual13.4
1
1800 115/23012.0/6.0 1.15
56C C313C 38Manual 13.4
1-1⁄2
1800 230/1157.5/15.0 1.15
56
C314
38
Manual13.9 5,$
1-1⁄2
1800 115/23015.0/7.5 1.15
56C C314C 42Manual 13.9
5,$
2 1800 230 9.0 1.1556HZC319
48
Manual15.0 5,$
Farm Rated Motors by Century®
Moderate Torque Single Phase – Capacitor Start & Two Value Capacitor Designs
Rigid Base – 1800 RPM – 1 1/2 thru 10 HP
Features: • Ball Bearings
• Energy Efficient $
• 60 Hz
• Service Factor 1.0
• Class B or F Insulation
• 40°C Ambient
• Reversible
K213M2
Applications: Vacuum pumps, compressors and other moderate starting applications.
HP
RPM
Volts
Full Load
Amps
Frame
Stock
Number
Wt.
Overload
Protector
Insulation
Class
“C”
Dim.
Efficiency
Notes
Farm Rated Motors by Century®
Totally-Enclosed Fan-Cooled
1-1⁄21800 230/1157.5/15.0 145T K104
2
1800 115/23024.0/12.0 182TK213M2
2 1800 230/1158.7/17.4182TZ K119
3 1800230 16.0184T
K214M2
5 1800230 20.0184T
K215M2
5 1800230 23.0213T
K310M2
7-1⁄21800 230
34.0 215TK311M2
101800 230 38.0 215T
K312M2
43
72
50
84
102
109
154
163
Manual
Manual
Manual
Manual
Manual
Manual
Manual
Manual
B
F
B
F
F
B
B
F
15.0
5,102,$
14.572.5
15.5
80.7
5,$
16.578.5
17.5 84.05,$
17.6
81.0
5,$
19.1
84.0
5,$
19.1 87.55,$
Extra High Torque Motors – Single & Three Phase – Totally-Enclosed
Fan-Cooled – Rigid Base and Rigid Base with C-Face – 1800 RPM – 1 thru 10 HP
Features:
• High Starting Torque
• Ball Bearings
• 60 Hz
• Reversible
• Removable Condensate Drain Plugs
• Class B or F Insulation • 40°C Ambient
• Service Factor 1.0
• All Parts Corrosion Resistant
K208M2
Applications: Designed for high starting torque loads (300-400% of full load torque). Barn cleaners, silo unloaders, stock feeding conveyors,
other heavy duty farm applications.
HP
RPM
Volts
Full Load
Amps
Frame
Stock
Number
Wt.
Shaft Dia.
& Length
Overload
Protector
Insulation
Class
“C”
Dim.
38
40
42
44
78
93
96
108
110
132
131
133
146
149
7/8” x 2-1/4”
7/8” x 2”
7/8” x 2-1/4”
7/8” x 2”
7/8” x 2-3/4”
1-1/8” x 2-3/4”
1-1/8” x 2-5/8”
1-1/8” x 2-3/4”
1-1/8” x 2-5/8”
1-1/8” x 3-1/2”
1-1/8” x 3-1/2”
1-1/8” x 3-1/8”
1-3/8” x 3-1/2”
1-3/8” x 3-1/8”
Manual
Manual
Manual
Manual
Manual
Manual
Manual
Manual
Manual
Manual
Manual
Manual
Manual
Manual
B
B
B
B
F
F
F
F
F
B
B
B
F
F
14.2
14.4
14.2
14.4
14.5
71.0
15.5
83.0
15.5
83.0
17.5
79.0
17.5
79.0
19.2
78.6
19.2
82.0
19.9
82.0
19.2
86.5
19.9
86.5
78
1-1/8” x 2-3/4”
Manual
B
16.8
Efficiency
Notes
Single Phase • Capacitor Start
1 1800 115/23014.6/7.3
143T K102
1
1800 115/23014.6/7.3 143TC K102C
1-1⁄21800 115/23016.2/8.1
145T K103
1-1⁄2
1800
115/230 16.2/8.1
145TC K103C
2
1800 115/23024.0/12.0 182TZ K204M2
31800230 13.7 184T
K205M2
31800
23013.7 184TC
K205CM2
51800230 22.0 184T
K208M2
51800230 22.0 184TC
K208CM2
51800230 26.0 215TZ
K300M2
7-1⁄21800 230
38.0
215TZ K301M2
7-1⁄21800
23038.0215TCZ
K301CM2
101800 230 39.0 215T
K302M2
101800
23039.0 215TC
K302CM2
5,$
5 ,$
183
5,183,$
5,183,$
5,183,$
5,183,$
183
5,183,$
5,183,$
5,183,$
5,183,$
Three Phase
5
1800 230/46015.0/7.5
184T
N220
86.0
1,183
Notes:
5. $ Energy Efficient two value capacitor start capacitor run motor
102. 1.15 service factor
183. Lifting Provisions
8
www.centuryelectricmotor.com
Grain Stirring Motors by Century®
Single Phase – Capacitor Start Capacitor Run –
Totally-Enclosed Fan Cooled – Rigid Base – 1800 RPM – 1- 1/2 HP
Features:
• Ball Bearings • Class B Insulation • Keyed Shaft
• 60 Hz • Service Factor 1.0
• Moisture Resistant • 40°C Ambient • Reversible
• Manual Overload Protector • 205 Bearing, Shaft End
C317V1
HP
1-1⁄2
RPM
1800
Volts
230
Full Load
Amps
Frame
7.4
56Y
Stock
Number
Wt.
Shaft
C317V1
32
7/8” x 1.44
“C”
Dim.
13.3
Notes
301
Note:
301. 115 volt tap off main
winding to power gear
drive unit.
Instant Reverse Motors by Century®
Instant Reverse Motors – Single Phase – Capacitor Start
Solid State Switching – Totally Enclosed Fan-Cooled – Rigid Base
1800 RPM – 1/2 thru 1 HP
Features:
• Ball Bearings
• 60 Hz
• Dual Voltage
• 40°C Ambient
• Class B Insulation
• Service Factor 1.0 C337
• Low Temperature Grease
• Manual Reset Overload Protector
Applications: Reversing feeders, door openers, gates, machine tools.
HP
RPM
Volts
Full Load
Amps
Frame
Stock
Number
Wt.
Overload
Protector
“C”
Dim.
Notes
PT Stearns SINPAC® Solid State Instant Reverse Switch
1⁄2 1800115/230 7.2/3.6 56 C337
28
Manual12.61
3⁄4 1800115/23010.4/5.2 56 C338
36
Manual13.36
1 1800115/23013.0/6.5 56 C339 35Manual 13.36
www.centuryelectricmotor.com
9
Grain Stirring & Instant Reverse Motors by Century®
Applications: Designed for interior grain bin installations.
Milk Pump Motors by Century®
Single Phase – Permanent Split Capacitor – Totally-Enclosed
Non-Ventilated – Rigid Base – 1200 – 3600 RPM – 1/2 thru 5 1/2 HP
Features:
• Ball Bearings
• 60 Hz
• 40°C Ambient
• Class B Insulation
• Service Factor 1.0 • Stainless Steel Shaft • Non-Reversible CW Rotation Facing End Opposite Shaft
• Cast Iron NEMA “C” End Bracket
• Weatherproof Features for Washdown B585
Applications: Milk transfer pump.
HP
RPM
Volts
Full Load
Amps
Frame
Stock
Number Enclosure
Shaft
Insul.
Overload
“C”
Class Protector Rotation Dim. Notes
Milk Pump Motors by Century®
Single Phase
1⁄2 3450 115/2306.6/3.356CZ* B587
TENV
Threaded
B
Auto
CW
11.3
114
1⁄2 3450 208-230 2.8-2.756HCZ B584
TENV
Threaded
B
Auto
CW
12.4
114
3⁄4 3450 208-230 4.0-3.856HCZ* B582
TENV
Keyed
B
Auto
CW
12.2
3⁄4 3450 208-230 4.0-3.856HCZ* B585
TENV
Threaded
B
Auto
CW
12.4
114
3⁄4 3450 208-230 4.0-3.856HCZ* B592
TENV
Special
B
Auto
RCW
13.4
223
1 3450 208-230 4.8-4.556HCZ* B583
TENV
Keyed
B
Auto
CW
12.2
1 3450 208-230 4.8-4.556HCZ* B586
TENV
Threaded
B
Auto
CW
12.4
114
5-1/21200
230
23.6 215T V308M2ODP Keyed F ManualRev19.3
5,87,
159,214
Three Phase
1⁄2
3⁄4
3⁄4
1
1
3450 208-230/4601.9-1.8/0.9 56HCZ
3450 208-230/4602.5-2.4/1.2 56HCZ
3450 208-230 2.5-2.456HCZ
3450 208-230/4603.3-3.2/1.6 56HCZ
3450 208-230/4603.3-3.2/1.6 56HCZ
B596
B597
B598
B595
B599
TENV
TENV
TENV
TENV
TENV
Threaded
Special
Key
Keyed
Threaded
B
B
B
B
B
Auto
Auto
Auto
Auto
Auto
CW//CCW
RCW
RCW
RCW
RCW
11.9
13.4
12.2
12.2
12.5
NEW!
NEW!
NEW!
NEW!
NEW!
*Denotes non-standard shaft
Zero Tank Replacement
PMDC Motor – Totally Enclosed Non-Ventilated – 95 VDC
950 RPM – Intermittent-Duty – 1/2 thru 1 HP
Features:
• Double Sealed Ball Bearings • Round Frame • Class F Insulation • Non-toxic, White Epoxy Paint, FDA Approved for Contact with Food
• Shaft Seal • All Bracket to Frame Fits and Terminal Cover have Internal O-ring • Gasketed Brush Access Covers • Stainless Steel Shaft, with or without O-ring Grooves on Shaft • 1/2” - 14 Tapped Conduit Hole Applications: Improved design to replace motors on Zero Milk Tank.
HP
RPM
1⁄2950
1⁄2950
1950
1950
Volts
95
95
95
95
Full Load
Amps
5.6
5.6
11.0
11.0
Stock
Number
Wt.
DC146
30
DC156
32
DC147
36
37
DC157
“C”
Dim.
O-ring Grooves
Notes
14.1No
14.1Yes
15.6No
15.6Yes
Notes:
5.
87.
159.
114.
214.
223.
$ Energy efficient two value capacitor start, capacitor run motor
Class F insulation
Open dripproof
Threaded shaft Acme threads
F2 assembly
Direct replacement for Surge milk pumps, Babson motor #27732, requires 30 MFD,370 VAC capacitor, separately mounted - not supplied
10
www.centuryelectricmotor.com
Pedestal Fan Motors by Century®
48 & 56 Frame Special Purpose Motors
Features:
• Class B Insulation
• Continuous Duty, Service Factor 1.0
• Thermally Protected
• Permanent Split Capacitor and Split Phase Designs
• Yoke Mount
• 40°C Ambient
• 60 Hz
Totally Enclosed
486A, 647A, 648A, 969A, 9451A,
9452A.
Open D.P.: 914L, 915L, 970A
Totally Enclosed
YA2020, YA2030,
YA2054
Notes:
3. Special OEM motor
6. 60/50 HZ
26. Extended thru bolts – shaft end only
29. 60 Degree C Ambient
39. Gasketed conduit box
84. Energy Efficient split phase start capacitor run with mounted capacitor
86. Cord and plug with pull chain
314. 1” extended thru bolts
www.centuryelectricmotor.com
11
Pedestal Fan Motors by Century®
Stock
Shaft Dia. “C”
HP
RPM
Speeds
Volts
Amps
Frame
Number
Wt.
Bearing
& Length
Rotation
Dim.
Notes
1⁄41100 2 115 6.1 48Y486A
21
Ball
1⁄2 x 3
CCWLE
10.4
29,86
1/41725 1 115 4.2 48YZ
YA2020
14
Sleeve
1/2 x 2
REV
9.8
39,314
1/4 1725 1 115/2303.6/1.8 48YZ 9451A
12
Ball
1⁄2 x 3-1⁄4
CCWLE
9.3
1/41725 1 115 5.1 48YZ914L
14
Sleeve
1⁄2 x 2
REV
9.9
1⁄31100 2 115 4.7 48Y647A
20
Ball
1⁄2 x 3
REV
9.9
26,86
1⁄31725 1 115 6.0 48YZ
YA203015Sleeve
1/2 x 2
REV
10.3
39,314
1⁄3 1725 1 115/2303.0/1.5 48Y 970A17Ball
1/2 x 2-1/2
CCWLE
8.9
3,6
1⁄21100 2 115 6.1 48Y648A
23
Ball
5⁄8 x 3
REV
10.9
86
1⁄2 1725 1 115/2304.5/2.3 48Y 9452A
23
Ball
5⁄8 x 2-1⁄2
CCWLE
10.2
1⁄21725 1 115 8.8 48YZ915L
17
Sleeve
5⁄8 x 2
REV
10.8
314
1⁄21725 1 115 5.0 48YZ
YA205421Sleeve
5/8 x 2
REV
10.8
39,84
1⁄2 840
1 115/2306.1/3.1 48Y 969A19Ball
5/8 x 2-5/8
CCWLE
11.0
3
Poultry Duty Motors
Features:
• Ball Bearings
• Class B Insulation
• High Starting Torque
• Reversible
• Suitable for 208 Volts at 1.0 S.F.
• TEAO
• 4 Pole
• 40°C Ambient
• 60 Hz
• Energy Efficient $(see notes)
PD6104AV2
RIGID AND RESILIENT BASES
Full Load
Service
Stock
Approx. Dim.
HP RPM
Volts
Amps
Factor Frame
Number
Wt.
Protector
“C”
“AG” EnclosureNotes
Auto 10.8 8.8TEAO 6,117
1/21725115/208-230 4.8/2.4
1.30 56 PD1050AV1 26
11725115/230 9.0/4.5 1.30 56PD6104AV2* 42
Auto 12.7 10.6TEAO 6,85,117
11725115/230 9.0/4.5 1.30 56PD6104AV3 40
Auto
12.8 10.1 TEAO6,34,85,117
$
$
Notes:
Shaft Dimensions
56 = 5/8” Keyed x 1-7/8
Poultry Duty Motors
6. 60/50 HZ
34. Rigid base
85. Energy efficient $ - capacitor start/capacitor run
117. TEAO - gasketed conduit box
*Resilient Base
12
www.centuryelectricmotor.com
Pressure Washer Motors by Century®
Single Phase - Dripproof & Totally Enclosed Fan-Cooled
Rigid Base – 3600 & 1800 RPM – 1.5 thru 6 HP
Features:
• Double Sealed Ball Bearings • 60 Hz • 40˚C Ambient • Class B Insulation
• Manual Overload Protector • Reversible
• Service Factor 1.15
• Energy Efficient $
• Two Step Varnish Treatment – Rotor surface and bearing brackets coated with corrosion resistant primer.
One dip and bake of Class B Varnish is applied to wound stator. The entire stator assembly is dipped in a second coating of varnish and
baked to seal out moisture.
B861
Applications: High Pressure washers (sprayers) and other applications.
Full LoadStock“C”
HP
RPM
Volts
Amps
Frame
Number
Wt.
Shaft
Dim.
1-1⁄23600
115/230 13.0/6.5
56
B176255/8” 11.4$
1-1⁄2 1800
115/208-23013.4/7.2-6.7
56
C775
35
5/8”12.2
$
2
3600
115/208-23017.2/9.2-8.6
56
B177L
34
5/8”12.7
$
21800 115/230 18.0/9.0 56H C210
32
5/8”14.4
$
33600 208-23013.5-12.5 56H B178
35
5/8”12.7
$
31800 208-230 13.5 145T C218
45
7/8”15.1
$
53600 208-230 22.0 56HZ B179
46
7/8”
14.6160,$
53600 208-230 22.0 56Y B180
52
7/8”
14.697,160,$
63600
230
24.0 56Y B869
50
7/8”
14.649,97,160,$
Dripproof • NEMA “C” Bracket
1-1⁄23600
115/230 13.0/6.5 56C B870
1-1⁄21800
115/230 13.4/6.7 56C C776
2
3600
115/208-230
17.2/9.2-8.6 56C
B860
2
1800
115/230 18.0/9.0
56HC
C215
3 3600 208-230 13.5-12.556HCZ B867
53600 208-230 22.0 56HCZB182
25
36
36
42
36
42
5/8”11.5
$
5/8”12.2
$
5/8”12.7
$
5/8”14.4
$
3/4”12.5
$
3/4”
14.5160,$
1-1⁄23600
115/230 13.0/6.5
1-1⁄21800
230/115 7.5/15.0
2
3600
115/208-230
16.6/9.1-8.4 2
1800
115/230
17.0/8.5 33600
230
12.0
33600
230
12.0
33
44
43
47
48
48
5/8”12.7
$
5/8”13.7
$
5/8”14.2
$
5/8”14.4
$
5/8”15.2
$
3/4”15.0
$
TEFC • NEMA “C” Bracket
56C B871
56C C777
56HC
B861
56HC
C213
56HC B382
56HC B868
Notes:
49. 1.0 Service Factor
97. 182T and 184T mounting holes,
4.5” shaft height
160. Non-reversible, Connected for
CW facing end-opposite shaft
www.centuryelectricmotor.com
13
Pressure Washer Motors by Century®
Notes
Dripproof • Standard Bracket
Three Phase TEFC Motors
Features:
• Rigid Base
• CE, CSA, UL Approvals
• IP43-180-250 Fr
• IP44-140 Fr.,
280 Fr. & above
Three Phase TEFC Motors
HP
• Class F Insulation
• Cont. Duty
• 1.15 Service Factor
• 40˚C Ambient • R.S. or CI Constr.
RPM
Volts
Amps @ 60 HZ
• 50/60 (50 HZ @ next lower HP, 1.15 SF)
• Inverter Duty
• NEMA Premium
• Ball Bearings
• C-Face Kits Available
Frame
Stock
Number
Wt.
Inverter
Duty
“C”
Dim.
TE102
Efficiency
Notes
1
1800
208-230/460
3-2.7/1.4
143T
TE102
53
10:1 CT/10:1 VT
13.2
85.5%
19, 115, 240
1
1800
575
1.1
143T
TE103
53
10:1 CT/10:1 VT
13.2
85.5%
19, 115, 240, 365
1
1800
200
3.1
143T
TE104
53
10:1 CT/10:1 VT
13.2
85.5%
19, 115, 240,365
19, 115, 240,365
1.5
1800
200
4.5
145T
TE107
62
10:1 CT/10:1 VT
14.2
86.5%
1.5
1800
208-230/460
4.3-3.9/2
145T
TE108
62
10:1 CT/10:1 VT
14.2
86.5%
19, 115, 240
1.5
1800
575
1.6
145T
TE109
62
10:1 CT/10:1 VT
14.2
86.5%
19, 115, 240, 365
2
1800
200
5.8
145T
TE114
60
10:1 CT/10:1 VT
14.2
86.5%
19, 115, 240,365
2
1800
208-230/460
5.6-5.1/2.5
145T
TE115
60
10:1 CT/10:1 VT
14.2
86.5%
19, 115, 240
19, 115, 240, 365
2
1800
575
2
145T
TE116
60
10:1 CT/10:1 VT
14.2
86.5%
3
1800
208-230/460
8.6-7.7/3.9
182T
TE121
99
10:1 CT/10:1 VT
14.8
89.5%
19, 115, 240
3
1800
575
3.1
182T
TE122
104
10:1 CT/10:1 VT
14.8
89.5%
19, 115, 240, 365
3
1800
200
8.9
182T
TE123
104
10:1 CT/10:1 VT
15.15
89.5%
19, 115, 240,365
5
1800
200
15
184T
TE128
115
10:1 CT/10:1 VT
16.14
89.5%
19, 115, 240,365
5
1800
208-230/460
14-13/6.4
184T
TE129
115
10:1 CT/10:1 VT
15.81
89.5%
19, 115, 240
5
1800
575
5.1
184T
TE130
115
10:1 CT/10:1 VT
15.81
89.5%
19, 115, 240, 365
7.5
1800
200
22
213T
TE135
175
10:1 CT/10:1 VT
18.23
91.7%
19, 115, 240,365
7.5
1800
208-230/460
21-19/9.6
213T
TE136
175
10:1 CT/10:1 VT
18.23
91.7%
19, 115, 240
7.5
1800
575
7.7
213T
TE137
182
10:1 CT/10:1 VT
18.23
91.7%
19, 115, 240, 365
10
1800
200
28.3
215T
TE142
200
10:1 CT/10:1 VT
19.73
91.7%
19, 115, 240,365
10
1800
208-230/460
27-25/12
215T
TE143
200
10:1 CT/10:1 VT
19.73
91.7%
19, 115, 240
10
1800
575
9.8
215T
TE144
209
10:1 CT/10:1 VT
19.73
91.7%
19, 115, 240, 365
15
1800
208-230/460
41-37/19
254T
TE149
330
10:1 CT/10:1 VT
26.66
92.4%
19, 115, 240
15
1800
575
15
254T
TE150
309
10:1 CT/10:1 VT
26.66
92.4%
19, 115, 240, 365
15
1800
200
42.6
254T
TE151
309
10:1 CT/10:1 VT
26.66
92.4%
19, 115, 240,365
19, 115, 240,365
20
1800
200
55.8
256T
TE156
350
10:1 CT/10:1 VT
31.22
93.0%
20
1800
208-230/460
54-49/24
256T
TE157
374
10:1 CT/10:1 VT
27.84
93.0%
19, 115, 240
20
1800
575
19
256T
TE158
378
10:1 CT/10:1 VT
27.84
93.0%
19, 115, 240, 365
19, 115, 240,365
25
1800
200
69
284T
TE163
510
10:1 CT/10:1 VT
30.04
93.6%
25
1800
208-230/460
67-60/30
284T
TE164
510
10:1 CT/10:1 VT
30.04
93.6%
19, 115, 240
25
1800
575
24
284T
TE165
510
10:1 CT/10:1 VT
30.04
93.6%
19, 115, 240, 365
30
1800
208-230/460
80-72/36
286T
TE170
566
10:1 CT/10:1 VT
31.22
93.6%
19, 115, 240
30
1800
575
29
286T
TE171
523
10:1 CT/10:1 VT
31.22
93.6%
19, 115, 240, 365
40
1800
208-230/460
104-94/47
324T
TE175
674
10:1 CT/10:1 VT
32.68
94.1%
19, 115, 240
40
1800
575
37
324T
TE176
646
10:1 CT/10:1 VT
32.68
94.1%
19, 115, 240, 365
50
1800
208-230/460
132-119/60
326T
TE180
725
2:1 CT/10:1 VT
33.86
94.5%
19, 115, 240
50
1800
575
48
326T
TE181
687
2:1 CT/10:1 VT
33.86
94.5%
19, 115, 240, 365
Notes:
19. C flange kit available
115. This motor is rated for operation on 60 or 50 HZ power, full load amps listed at 60 HZ
240. F1/F2 Assembly
365.3 leads
Cast Iron – Shaded area
14
Published efficiency on tri-voltage rated motors applies
at 230/460 volts. Performance at 200 or 208 volts may
not be in accordance with NEMA standards. Published
efficiency on 200-208 volt motors applies at 200 volts.
www.centuryelectricmotor.com
General Purpose IHP Motor Dimensions
Single and Three Phase 143T-449T Frame • Dripproof • Totally Enclosed • Explosion-Proof
56H Combination Foot
6.50
5.00
Ref.
3.00
Ref.
2.75
143T
145T
182T
184T
213T
215T
254T
256T
284T
284TS
286T
286TS
324T
324TS
326T
326TS
Keyway
3⁄16 x 3⁄32 3⁄16 x 3⁄32
1⁄4 x 1⁄8
1⁄4 x 1⁄8
5⁄16 x 5⁄32
5⁄16 x 5⁄32
3⁄8 x 3⁄16
3⁄8 x 3⁄16
1⁄2 x 1⁄4
3⁄8 x 3⁄16
1⁄2 x 1⁄4
3⁄8 x 3⁄16
1⁄2 x 1⁄4
1⁄2 x 1⁄4
1⁄2 x 1⁄4
1⁄2 x 1⁄4
BA
2.25
2.25
2.75
2.75
3.50
3.50
4.25
4.25
4.75
4.75
4.75
4.75
5.25
5.25
5.25
5.25
D E 2FHNU 1
2
3.50
3.50
4.50
4.50
5.25
5.25
6.25
6.25
7.00
7.00
7.00
7.00
8.00
8.00
8.00
8.00
2.75
2.75
3.75
3.75
4.25
4.25
5.00
5.00
5.50
5.50
5.50
5.50
6.25
6.25
6.25
6.25
4.00
5.00
4.50
5.50
5.50
7.00
8.25
10.00
9.50
9.50
11.00
11.00
10.50
10.50
12.00
12.00
11⁄32
11⁄32
13⁄32
13⁄32
13⁄32
13⁄32
17⁄32
17⁄32
17⁄32
17⁄32
17⁄32
17⁄32
21⁄32
21⁄32
21⁄32
21⁄32
2.31
2.31
2.81
2.81
3.50
3.50
4.25
4.25
4.88
3.50
4.88
3.50
5.50
4.00
5.50
4.00
.875
.875
1.125
1.125
1.375
1.375
1.625
1.625
1.875
1.625
1.875
1.625
2.125
1.875
2.125
1.875
V
3
2.00
2.00
2.50
2.50
3.13
3.13
3.75
3.75
4.38
3.00
4.38
3.00
5.00
3.50
5.00
3.50
Notes:
1 Dimension
“D” tolerance: - 8” or less, +.000, -.031; over 8”, +.000-.062
“U” tolerance: - 11⁄2” dia. or less, +.0000, -.0005; over 11⁄2” dia., +.000, -.001
3 Dimension “V” is usable length of shaft
2 Dimension
Common to all Fractional Motors
Frame Keyway
42
.05 Flat
48 .05 Flat
56
3/16 sq. x 1-3/8
56H
3/16 sq. x 1-3/8
56C
3/16 sq. x 1-3/8
56J
Threaded
143T
3/16 sq. x 1-3/8
145T
3/16 sq. x 1-3/8
www.centuryelectricmotor.com
D
E F BA UN-W
2-5/8
1-3/4
27/32
2-1/16
3/8
1-1/8
3
2-1/8
1-3/82-1/21/21-5/8
3-1/2
2-7/16
1-1/2
2-3/4
5/8
1-7/8
3-1/2
Dia. 1
Dia. 1
2-3/4
5/8
1-7/8
See Diagram 2
5/8
1-7/8
See Diagram 2
5/8
2-7/16
3-1/2
2-3/4
2
2-1/4
7/8
2-1/4
3-1/2
2-3/4
2-1/2
2-1/4
7/8
2-1/4
For Reference Only Unless Approved for Construction
15
General Purpose IHP Motor Dimensions
NEMA
Frame
2.75
NEMA Frame Assignments
Open and TEFC (TEFC Frame in Beige where different than open)
3600 RPM
NEMA
Frame
Hp
1
“T”
Frames
1964
“U”
Frames
1952
—
—
1800 RPM
Original
NEMA
Frames
—
“T”
Frames
1964
1200 RPM
“U”
Frames
1952
Original
NEMA
Frames
“T”
Frames
1964
“U”
Frames
1952
182
203
145T
184
143T
900 RPM
Original
NEMA
Frames
204
“T”
“U”
Original
Frames Frames NEMA
1964
1952
Frames
182T
213
225
1 1/2
143T182
203
145T184 204
182T
184
224
184T
213
254
NEMA Frame Assignments
2145T184
204
145T184 224
184T
213
225
213T
215
254
3
145T / 182T
184
224
182T
213
225
213T
254
215T254U 284
5
182T / 184T
213
225
184T
215
254
215T 254U 284
254T256U 324
7 1/2
184T / 213T
215
254
213T
254U
284
254T 256U 324
256T284U 326
10
213T / 215T
254U
284
215T
256U
324
256T 284U 326
284T286U 364
15
215T / 254T
256U
324
254T
284U
326
284T 324U 364
286T326U 365
20
254T / 256T284U/286U
326
256T
286U
364
286T 326U 365
324T364U 404
25
256T / 284TS286U/324U364S/365S284T
324U
364/365
324T 364U 404
326T365U 405
30
284TS / 286TS324S/326S364S/404S286T
326U
365/404
326T 365U 405
364T404U 444
40
286TS / 324TS326S/364US365S/405S324T
364U
404/405
364T 404U 444
365T405U 445
50
324TS / 326TS 364US404S/444S326T
365US 405S/444S 365T 405U 445
60
326TS / 364TS365US/405US405S/445S364TS404US/405US444S/445S 404T 444U 504U 405T445U 505
75
364TS / 365TS404US/444US444S/504S365TS405US/444US445S/504S 405T 445U 505 444T— —
100
365TS / 405TS405US/445US445S/505S404TS/405TS444US/445US504S/505S 444T
125
404TS / 444TS
150
405TS / 445TS445US 505S444TS/445TS —
444US
504S
405T /444TS 445US
215
—
404T444U 504U
— 445T— —
505S 445T — — —— —
—
—
— — —— —
200
444TS ——445TS —
——
—
—
—
—
—
250
445TS —— —
——
—
—
—
—
—
16
—
www.centuryelectricmotor.com
Pulley Speed Chart
PULLEY SPEED CHART
Speeds are approximate, based on 1725 RPM motor.
Speeds are approximate, based on 1725 RPM motor.
Motor
Pulley
Diameter
Motor
Pulley
Diameter
1.5
3.0
3.5
4.0
4.5
5.0
5.5
6.5
7.0
7.5
8.0
8.5
9.0
9.5
10.0
10.5
11.0
11.5
12.0
12.5
13.0
13.5
14.0
14.5
15.0
15.5
16.0
16.5
17.0
17.5
18.0
2.0
2.5
2.75
3.0
3.25
3.5
3.75
4.0
4.25
4.5
4.75
5.0
5.25
5.5
5.75
6.0
6.5
7.0
7.5
1725
1533
1380
1255
1150
1062
986
920
863
812
767
726
690
657
627
600
575
552
531
511
493
476
460
445
431
418
406
394
383
1629
1466
1333
1222
1128
1047
978
916
863
815
772
733
698
666
638
611
587
564
543
524
506
489
473
458
444
431
419
407
1725
1553
1411
1294
1194
1109
1035
970
913
863
817
776
739
706
675
647
621
597
575
554
535
518
501
485
470
457
444
431
1639
1490
1366
1261
1171
1093
1024
964
910
863
819
780
745
713
683
656
630
607
585
565
546
529
512
497
482
468
455
1725
1568
1438
1327
1232
1150
1078
1015
958
908
863
821
784
750
719
690
663
639
616
595
575
556
539
523
507
493
479
1647
1509
1393
1294
1208
1132
1065
1006
953
906
863
823
788
755
725
697
671
647
625
604
584
566
549
533
518
503
1725
1581
1460
1355
1265
1186
1116
1054
999
949
904
863
825
791
759
730
703
678
654
633
612
593
575
558
542
527
1653
1526
1417
1323
1240
1167
1102
1044
992
945
902
863
827
794
763
735
708
684
661
640
620
601
583
567
551
1725
1592
1479
1380
1294
1218
1150
1089
1035
986
941
900
863
828
796
767
739
714
690
668
647
627
609
591
575
1725
1602
1495
1402
1319
1246
1180
1121
1068
1019
975
934
897
863
831
801
773
748
723
701
680
660
641
623
1725
1610
1509
1421
1342
1271
1208
1150
1098
1050
1006
966
929
894
863
833
805
779
755
732
710
690
671
1725
1617
1522
1438
1362
1294
1232
1176
1125
1078
1035
995
958
924
892
863
835
809
784
761
739
719
RPM
X Motor
Diameter
MotorMotor
RPM X
Motor
PulleyPulley
Diameter
Driven
RPM =
Driven
PulleyPulley
RPM =
Diameter
DrivenDriven
PulleyPulley
Diameter
www.centuryelectricmotor.com
17
Pulley Speed Chart
Driven Pulley Diameter
6.0
1.75
863 1006 1150 1438 1581 1725
739 863 986 1232 1355 1479 1602 1725
647 755 863 1078 1186 1294 1402 1509 1617
575 671 767 958 1054 1150 1246 1342 1438
518 604 690 863 949 1035 1121 1208 1294
470 549 627 784 863 941 1019 1098 1176
431 503 575 719 791 863 934 1006 1078
398 464 531 663 730 796 863 929 995
370 431 493 616 678 739 801 863 924
345 403 460 575 633 690 748 805 863
323 377 431 539 593 647 701 755 809
304 355 406 507 558 609 660 710 761
288 335 383 479 527 575 623 671 719
272 318 363 454 499 545 590 636 681
259 302 345 431 474 518 561 604 647
246 288 329 411 452 493 534 575 616
235 274 314 392 431 470 510 549 588
225 263 300 375 413 450 488 525 563
216 252 288 359 395 431 467 503 539
207 242 276 345 380 414 449 483 518
199 232 265 332 365 398 431 464 498
192 224 256 319 351 383 415 447 479
185 216 246 308 339 370 400 431 462
178 208 238 297 327 357 387 416 446
173 201 230 288 316 345 374 403 431
167 195 223 278 306 334 362 390 417
162 189 216 270 296 323 350 377 404
157 183 209 261 288 314 340 366 392
152 178 203 254 279 304 330 355 381
148 173 197 246 271 296 320 345 370
144 168 192 240 264 288 311 335 359
Farm Rated® Motor Cross Reference
Century
Baldor
Dayton
486A
YPC1624A
GE
Leeson
Marathon
NIDEC / USEM
4M196
191891
X923
1917
647A
YPC2624A
191982
X924
1835
648A
YPC3624A
4M197
191893
X925
1838
9451A
YPC144A
4M254
191872
X920
9452A
YPC344A
4M256
191873
X922
4M255
191871
X921
915L
191875
969A
970A
Motor Cross Reference
B176
PL1313M
113631
B177L
PL1317M
113632
B178
PL1326M
116706
B179
116708
B180
116789
B182
116709
B221
AFL3520A
B222
AFL3521A
111332
4K059
F107
B381
B382
111333
PCL3519M
121060
110222
B384
116789
B385
116523
B386
111275
B592
113939
B621
L3503
110399
B664
L3506
110276
B674
L3509
110059
B695
LM3509M
110142
B697
L3515M
110402
B762
L3513
B813
110094
6K794
PCL1317M
D017
111275
9038
114215
B861
PCL3515M
114995
B870
PCL1313M
114214
B871
PCL3513M
115024
C042A
CHC3413A
4M251
100803
X024
C043A
CHC3416A
4M252
100804
X025
C044A
CHL3524A
4M253
111323
X026
C045A
CHC3414A
4M042
100824
X027
C046A
CHC3417A
4M041
100825
X028
4M040
111321
X029
C047A
CHC3525A
C048
CHC3526A
111919
C210
PL1322M
120879
C213
PCL3515M
C215
PCL1322M
C218
L14018TM
18
FD1CA1PZ
110222
B383
B860
FD34CA1PZ
C1468
I127
113281
www.centuryelectricmotor.com
Farm Rated® Motor Cross Reference
Century
Baldor
Dayton
GE
Leeson
Marathon
NIDEC / USEM
C310
FDL3501M
6K710
F13E1
113256
F101
FD13CM2P
116485
F131
F12E1
110086
F102
116486
F132
F34E1
110087
F103
116487
F133
C310C
CDL3501M
4VZ06
C311
FDL3504M
6K714
C311C
CFDL3504M
4VZ08
C312
FDL3507M
6K719
C312C
CFDL3507M
4VZ10
C313
FDL3510M
6K727
C313C
CFDL3510M
4VZ12
C314
FDL3514M
6K740
4VZ36
C314C
CFDL3514M
C317V1
GSL3509M
C319
FDL3516TM
F10E1
F100
110088
F104
116488
F134
110089
F105
116489
F135
FD12CM2P
FD34CM2P
FD1CM2PZ
FD32CM2PZ
111330
4K090
C1904
110090
Z128
FD2CM2PHZ
ANFL3501M
3K994
F201
101435
C1291
FD138M2PZYR
ANFL3504M
3K995
F202
101436
C1292
FD12CM2PZYR
C332
ANFL3507M
3K996
C333
ANFL3510M
F203
101437
C1293
FD34CMP2PZYR
F204
118802
C1294
FD1CM2PZY
C1295
FD32CM2PHZY
C337
114932
C338
IR3507M
114932
C339
IR3510M
114933
C340
ANFL3514M
F205
113301
C345
FD13SM2DZYR
C346
FD12SM2DZYR
C347
FD34SM2DZYR
C348
FD1SM2DZYR
C349
FD32SM2DZYR
C580
M009580
X913
C581
X905
M009581
C1314
C582
X906
M009782
C1315
C612
L3504
110012
C613
L3504A
110016
C669
L3507
110013
C671
L3507A
110017
C683
L3510
110209
C685
L3510A
110018
C686
110019
C693
L3514
C775
L1319M
C776
PCL1319M
C777
PCL3514M
6K422
C1299
120004
G951
110160
D010
110161
C704
C782RB
FD34BA2P
CP1102L
3K785
CP1152L
3K786
D018
F500L
X904
X1904
F501
X900
H247
F683
www.centuryelectricmotor.com
100825
19
Motor Cross Reference
C330
C331
Farm Rated® Motor Cross Reference
Century
Baldor
H535L
M3554
K100
L3510T
K102
FDL3510TM
Dayton
GE
6K994
Leeson
Marathon
NIDEC / USEM
121569
Z123
FD1CM2P14
K103
FDL3514TM
K104
FDL3514TM
6K311
F15E1
113938
113938
Z118
FD32CM2P14
K116
AFL3524A
4K062
F110
120376
C1275
FD3CA1K14
4K060
K117
AFL3522A
K118
AFL3523A
F108
120374
C1273
FD32CA1P14
F109
120375
C1274
FD2CA1P14
K204M2
FDL3611M
131541
K205M2
FDL3619TM
131542
K208CM2
CFDL3612TM
131995
I315A
131543
Z114A
K205CM2
Motor Cross Reference
FD32CM2P14
FD2CM2P18
I314A
K208M2
FDL3612TM
K213M2
FDL3611TM
6K882
FD3CM2K18
131541
FD5CM2K18
FD2CM2P18
K214M2
FDL3619TM
131542
FD3CM2K18
K215M2
FDL3612TM
131543
FD5CM2K18
K220M2
UCCE570
131847
Z305A
FDCM1K18Z
131848
Z307A
FDCM1K18Z
140223
Z117
FDU5CM2K21Z
K221M2
UCC7100
K222M2
L3606T
K223M2
L3608T
K236M2
UCCE759
K300M2
FDL3731M
6K883
101651
FDL3732M
6K884
F798
140209
Z115
FDU7CM2K21Z
FDL3737TM
6K885
F795
140414
Z116
FDU10CM2K21
L3710T
6K969
140707
Z122
FD7CM2K21
K301CM2
K301M2
K302CM2
K302M2
K310M2
K311M2
FD5CM2K21
K312M2
L3712T
K314M2
L3709T
K315M2
L3711T
K321M2
UCL1015
140708
4K094
140640
FD10CM2K21
Z308
PD1050AV1
FD12BA2P9
PD6104AV2
111267
PD6104AV3
FD1CA2P9
111333
FD1CA2J
R243M2
UCM713
131850
Y1303
R244M2
UCM575
131849
Y302A
R327M2
UCME1014
V201M2
L1408T
6K756
140641
Y304
131534
Z502
V209M2
L1410T
V211M2
L1409T
V303M2
GDL1610T
140311
I116
V305M2
GDL1607T
140155
I115
20
131537
www.centuryelectricmotor.com
Index of Catalog Numbers
Stock
Number
Weight
Page
Number
Stock
Number
Weight
Page
Number
Stock
Number
Weight
Page
Number
486A
21
11
B860
36
13
C581
35
5
20
11
B861
43
13
C582
39
5
648A
23
11
B867
36
13
C588
33
5
914L
14
11
B868
48
13
C593
38
4
647A
915L
17
11
B869
50
13
C594
38
4
9451A
12
11
B870
25
13
C595
43
4
9452A
23
11
B871
33
13
C596
35
4
969A
19
11
C039A
21
6
C597
35
4
45
4
970A
17
11
C042A
19
6
C598
B176
25
13
C043A
20
6
C612
28
7
28
7
B177L
34
13
C044A
24
6
C613
B178
35
13
C045A
16
6
C669
33
7
18
6
C671
33
7
46
13
B180
52
13
C047A
23
6
C683
34
7
B182
42
13
C048
33
6
C685
37
7
B220
22
1
C059A
17
6
C686
45
7
B221
28
1
C213
47
13
C693
44
7
B222
31
1
C215
42
13
C775
35
13
B381
27
2
C218
45
13
C776
36
13
B382
48
13
C310
27
7
C777
44
13
B383
30
2
C310
32
13
C782RB
41
5
44
6
C310C
29
7
C783
2
C311
28
7
CP1072L
24
2
C311C
30
7
CP1102L
26
2
B384
50
2
B385
37
B386
37
2
B387
53
2
C312
32
7
CP1152L
32
2
C312C
34
7
CP1202L
32
2
B582
36
10
B583
37
10
C313
36
7
CP1302L
33
2
B584
31
10
C313C
38
7
CP1502L
44
2
B585
35
10
C314
38
7
CP1502LV1
37
2
B586
39
10
C314C
42
7
DC146
30
10
B587
24
10
C317V1
32
9
DC147
36
10
B592
28
10
C319
48
7
DC156
32
10
37
10
B595
36
10
C330
27
3
DC157
B596
23
10
C331
30
3
E219M2
75
3
32
3
E317M2
123
3
B597
28
10
C332
B598
35
10
C333
36
3
E397M2
131
3
28
9
E407M2
267
3
B599
38
10
C337
B621
25
7
C338
36
9
E451M2
243
3
B664
30
7
C339
35
9
E514M2
308
3
B666
20
1
C340
45
3
E516M2
365
3
B674
33
7
C345
26
3
F500L
13
5
B685
18
2
C346
29
3
F501
24
5
B695
32
7
C347
31
3
F502
25
5
B697
40
7
C348
35
3
F683
25
6
B762
35
7
C349
44
3
F684
27
6
2
C580
30
5
H041
24
1
B813
45
www.centuryelectricmotor.com
Index
B179
C046A
21
Index
Index of Catalog Numbers
Stock
Number
Weight
Page
Number
Stock
Number
Weight
Page
Number
H042
28
1
TE104
53
14
62
14
K100
37
7
TE107
K102
38
8
TE108
62
14
K102C
40
8
TE109
62
14
K103
42
8
TE114
60
14
K103C
44
8
TE115
60
14
K104
43
8
TE116
60
14
K112
39
1
TE121
99
14
104
14
K116
44
1
TE122
K117
34
1
TE123
104
14
115
14
K118
36
1
TE128
K119
50
8
TE129
115
14
115
14
K204M2
78
8
TE130
K205CM2
96
8
TE135
175
14
K205M2
93
8
TE136
175
14
K208CM2
110
8
TE137
182
14
K208M2
108
8
TE142
200
14
K213M2
72
8
TE143
200
14
K214M2
84
8
TE144
209
14
K215M2
102
8
TE149
330
14
K220M2
84
4
TE150
309
14
309
14
K221M2
82
4
TE151
K236M2
118
4
TE156
350
14
374
14
K300M2
132
8
TE157
K301CM2
133
8
TE158
378
14
131
8
TE163
510
14
K302CM2
149
8
TE164
510
14
K302M2
146
8
TE165
510
14
K310M2
109
8
TE170
566
14
K311M2
154
8
TE171
523
14
K312M2
163
8
TE175
674
14
K320M2
125
4
TE176
646
14
TE180
725
14
K301M2
K321M2
138
4
K327M2
146
4
TE181
687
14
78
2
N220
78
8
V201M2
PD1050AV1
26
12
V208M2
84
2
V209M2
84
3
PD6104AV2
42
12
PD6104AV3
40
12
V211M2
82
2
R155
34
1
V303M2
156
3
R180
31
1
V305M2
158
3
R181
35
1
V308M2
151
10
R243M2
70
4
YA2020
14
11
R244M2
75
4
YA2030
15
11
R327M2
109
4
YA2054
21
11
TE102
53
14
TE103
53
14
22
www.centuryelectricmotor.com
Fraction/Decimal/Millimeter Conversions
Fraction Decimal
Millimeter
Fraction
⁄64 .046875
1.191
35
⁄16
.0625
1.588
9
14.288 4
.1575
⁄64.578125 14.684 5
.1969
⁄32.59375 15.081 6
.2362
⁄64.609375 15.478 7
.2756
⁄8 .3150
1
⁄64.51562513.097 1 .0394
⁄32.53125 13.494 2 .0787
⁄64.54687513.891 3 .1181
⁄16.5625
.078125
1.984
3
⁄32 .09375
2.381
19
7
⁄64 .109375
2.778
39
1
⁄8 .125
3.175
5
9
⁄64 .140625
3.572
41
5
⁄32 .15625
3.969
21
11
⁄64 .171875
4.366
43
3
⁄16 .1875
4.763
11
13
⁄64 .203125
5.159
45
7
⁄32 .21875
5.556
23
⁄64 .234375
5.953
47
⁄4 .25
6.350
3
15
1
17.463 12 .4724
⁄64.703125 17.859 13 .5118
⁄32.71875 18.256 14 .5512
⁄64.734375 18.653 15 .5906
⁄4 .75
19.050
16
.6299
⁄32.78125 19.844 18 .7087
⁄64 .296875
7.541
51
⁄64.796875 20.241 19 .7480
⁄16.3125
7.938
13
⁄16.8125
⁄64 8.334
53
⁄64.828125 21.034 21 .8268
⁄32.34375 8.731
27
⁄32.84375 21.431 22 .8661
⁄64 .359375
9.128
55
⁄64.859375 21.828 23 .9055
⁄8 .375
9.525
7
⁄64 .390625
9.922
57
⁄32 .40625
10.319
29
⁄64 .421875
10.716
59
⁄16 .4375
11.113
15
⁄64 .453125
11.509
⁄32 .46875
11.906
⁄64 .484375
12.303
⁄2 .5
12.700
.328125
11
23
3
25
13
27
7
29
⁄16.6875
7.144
⁄64.671875 17.066 11 .4331
.28125
21
⁄32.65625 16.669 10 .3937
⁄32 .3543
⁄64.765625 19.447 17 .6693
5
⁄64.640625 16.272 9
25
19
8
⁄64.265625 6.747
9
15.875
49
17
.625
15
31
1
www.centuryelectricmotor.com
⁄8 .875
20.638 20 .7874
22.225
24
.9449
⁄64.890625 22.622 25 .9843
⁄32.90625 23.019
To convert millimeters
⁄64.921875 23.416
into inches, multiply
⁄16.9375 23.813
by .03937.
61
⁄64.953125 24.209
31
To convert inches into
⁄32.96875 24.606
millimeters, multiply by
63
⁄64.984375 24.003
25.40.
1
1.0
25.400
23
Fraction/Decimal/Millimeter Conversions
⁄64 37
5
Inch
⁄32.03125 0.794
MM
17
3
Millimeter
⁄64 .015625 0.397
1
Decimal
33
1
Notes
Notes
24
www.centuryelectricmotor.com
Statement of Warranty Policy
Warranty Period
DISCLAIMER OF IMPLIED WARRANTIES
All Century® motors are warranted against defects in materials and
workmanship for a period of twelve (12) months from the date of installation or twenty-four months (24) from the date of manufacture, whichever comes first except for E-Plus®3 Integral Horsepower Motors and
HeatMaster® Condenser Fan Motors which are warranted for twenty-four
months (24) from date of installation and thirty-six (36) months from date
of manufacture, whichever comes first.
EXCEPT AS MAY BE REQUIRED UNDER APPLICABLE LAW, THE LIMITED
WARRANTY SET FORTH ABOVE IS THE EXCLUSIVE WARRANTY PROVIDED
WITH THE MOTORS. ALL OTHER WARRANTIES, WHETHER WRITTEN OR
VERBAL, EXPRESSED OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
EXPRESSLY DISCLAIMED BY CENTURY.
Limitation of Remedy
Conditions of Warranty
This limited warranty shall be void and of no effect if:
In the event of a breach of the warranty within the applicable warranty
period, Century shall have the option of (1) repairing such motor; (2)
supplying an identical or substantially similar replacement motor FOB,
Century’s factory; or (3) refunding or giving credit for the purchase price
of such motor.
Authorized Location
Defective motors which have failed during the applicable warranty period must be
returned freight prepaid to a Century’s authorized distributor. Call 800-672-6495.
How to Read Date Codes on Motor Nameplates & Labels
As of August 2006 a common date code format
for all motors is being used. It consists of
seven alpha-numeric characters. The first three
characters represent the day of the year based
on the Julian calendar, the next two the year,
and the last two the plant code. For example,
123064M, would mean the 123rd day of 2006
(May 3, 2006) in Regal’s Juarez IGMEX4 plant.
Users and distributors may visit our website
centuryelectricmotor.com to access our ‘date
code converter,” as well as applicable warranty
forms.
The date codes utilized prior to the conversion to our current format are listed below for your reference.
Century Product
Plant code–Month–Year. Example: 7B99. 7 is a plant code designation, B is the month (January is A, February is B, etc.) and 99 is the year.
Century®, Indiana General, Louis Allis Product
Year code–Month. Example: BA3. BA is the year (see table below). 3 is the month (1-12).
1992
1993
1994
1995
BK
BL
BM
BN
1996
1997
1998
1999
BP
BR
BS
BT
2000
2001
2002
2003
BU
BW
BX
BY
2004
2005
2006
2007
BZ
CA
CB
CC
2008
2009
2010
CD
CE
CF
Universal® Product
Week (1-52), Year (Letter code from table below), Factory order number code, Plant code.
Example: 8 Z 0275592 R. 8 is the 8th week of the year, Z is the year (1988), 027592 is the factory order code, R is the plant code (Ripley).
1992
1993
1994
1995
D
E
F
G
1996
1997
1998
1999
H
J
K
L
2000
2001
2002
2003
M
N
P
R
2004
2005
2006
2007
S
T
U
V
2008
2009
W
X
Statement of Warranty Policy
The remedy set forth above shall be the sole and exclusive remedy for the
motors failing within the applicable warranty period. Century, shall not be
liable for any lost profits, loss of use, or any other consequential, special
or incidental damages.
1. The motor has been subjected to improper handling, storage or installation,
or subject to abuse or unauthorized repairs;
2. The motor was not suitable for the application or operated above its rated
load; or
3. The motor was subject to water damage including motor bearing failures
resulting from pump seal failures.
Distribution Marketing
1325 Heil Quaker Blvd.
LaVergne, TN 37086
PH: 800-672-6495
FAX: 800-468-2062
A Regal Brand
www.centuryelectricmotor.com
© 2014 Regal-Beloit Corporation
Bulletin 1401D
5/2014
www.regalbeloit.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement