COMMERCIAL DRYERS Featuring Factory-Installed Coin Slide and Coin Box

COMMERCIAL DRYERS Featuring Factory-Installed Coin Slide and Coin Box
Commercial Dryers
Featuring Factory-Installed Coin Slide and Coin Box
FOR YOUR CUSTOMERS
• Large Capacity is Ideal for Family-Size Loads
• Increased Capacity Allows Large Loads to
Tumble and Spreads Reducing Dry Time
• 3 Cycle Options: Regular/Heavy, Permanent
Press and Knits/Delicates
• Easy-To-Follow Console Instructions
• 180° Wide-Opening Side-Swing Door Allows
For Convenient Access
IMPROVED AIRFLOW SYSTEM
• New Blower Housing Wave
Insert Increases Air Velocity
up to 10%
• Increases Efficiency, Heating Element Lifespan
and Improves Fabric Care*
* Results per Whirlpool® dryer testing conducted 07/03–08/04.
CEM2750TQ—27" Electric Dryer
CGM2751TQ—27" Gas Dryer
• 7.4 Cu. Ft. Drum Capacity
• Push-Button Controls with
Stainless-Look Console
• 3 Cycles: Regular/Heavy (High Heat),
Permanent Press (Medium Heat),
and Knits/Delicates (Low Heat)
• Large Removable, Door-Mounted
Lint Screen (84 Sq. In.)
• 180° Wide-Opening
Side-Swing Door
• Porcelain Top, Powdered Paint
Cabinet
• Rust Proof Stainless Steel Torx®
Control Panel Screws
• Front Service Accessibility
• 4-Way, Multi-Vent Options
(Back, Bottom and Sides)
• Electric Model Features Element
Rated at 5600 Watts, 240 Volt
• Gas Model Features a 22K
BTU Burner
• Motor: 1/3-HP with Built-In
Overload Protector; Centrifugal
Switch Turns Off Heating Element
When Motor Stops
• 8 Quarter Coin Slide Capacity, Set
Your Dry Price From $0 to $2 Per
Cycle ($1 Factory Preset)
• Power Cord Sold Separately
(Electric Model Only)
• 3 Years Limited Parts Only
Warranty**
**Call 1-800-NO-BELTS for warranty details.
SINGLE OPERATING THERMOSTAT
For simple accurate temperature control.
LARGE CAPACITY METERCASE
Larger coin box for reduced collections.
FRONT LOCK READY
• Factory-Installed Lock Blank Provides a Visual
Vandalism Deterrent
• Optional Front Panel Lock Assembly (Part
#358290) For Added Security of Tying Front
and Top Panels Together
Commercial Dryers
Featuring Factory-Installed Coin Slide and Coin Box
DRYER SPECIFICATIONS
MODELS
GENERAL INFORMATION
CEM2750TQ
Stainless-look push-button console, white enamel
drum, porcelain finish top, powdered paint cabinet,
front panel lock blank factory-installed, removable lint
filter, improved metercase, 4-way venting
DRUM VOLUME
MOTOR
ELECTRICAL REQUIREMENTS
HEATER TYPE
HEATER/BURNER RATING
(Add 500 Watts Approx. for Motor on all Dryer Models)
OPERATIONAL AMPERAGE
(Does Not Include Control or Gas Valve)
SHIPPING WEIGHT (Estimate)
DIMENSIONS
Width – in. (cm)
Depth – in. (cm)
Height – in. (cm)
CGM2751TQ•
Metercase Model Factory-Installed
Coin Slide and Coin Box,
$0-$2 per Cycle, $1.00 Factory Preset
Metercase Model Factory-Installed
Coin Slide and Coin Box,
$0-$2 per Cycle, $1.00 Factory Preset
7.4 Cu. Ft.
1/3-HP Single-Speed Motor with Built-In Overload
Protector, 5.9 Amps Max Rating
3-Wire Nominal 240/208 Volt, 60 Hz, A.C.,
Standard 30 Amp Breaker/Fuse Branch Circuit per
Dryer (Subject to Local Codes)
Electric
7.4 Cu. Ft.
1/3-HP Single-Speed Motor with Built-In Overload
Protector, 5.9 Amps Max Rating
Nominal 120 Volt, 60 Hz, A.C., Standard 15 Amp
Breaker/Fuse Branch Circuit per Dryer
(Subject to Local Codes)
Gas*
Heater Rated at 5600 Watts
22,000 BTU Natural Gas
Motor – 4.0 Amps No Load Heater
23.33 Amps @ 240 Volt 27.33 Total
134 Lbs.
27 (69 cm)
28.5 (72.39 cm)
43** (109 cm)
*Burner orifices are available for manufactured, natural, mixed and LP gas with varying BTU ratings. **(height at metercase top)
Energy information is available online at www.whirlpoolcommerciallaundry.com/products
Motor – 4.0 Amps No Load
135 Lbs.
27 (69 cm)
28.5 (72.39 cm)
43** (109 cm)
Power cords on electric models sold separately • LP Conversion Kit: 49572
Exhaust Information
All dryers require the equivalent of a 4-inch
diameter exhaust duct. Rigid metal duct is
recommended. Failure to properly exhaust the
dryer will result in improper operation.
Dimensions are for planning purposes only. For
complete information, see installation instructions
packed with product.
27" & 29" Dryer Venting Requirements
# of 90° turns
4" Hood
2 1⁄2" Hood
Maximum Length of 4" Diameter Rigid Metal Duct
DRYER FRONT VIEW
DRYER BACK VIEW
0
64 Ft.
58 Ft.
1
54 Ft.
48 Ft.
2
44 Ft.
38 Ft.
3
35 Ft.
29 Ft.
4
27 Ft.
21 Ft.
Maximum Length of 4" Diameter Flexible Metal Duct
3 YEARS LIMITED parts
ONLY WARRANTY
For a period from the date of original purchase through
the time listed above, the designated parts that fail in
normal commercial use will be repaired or replaced free
of charge for the part itself, with the owner paying all
other costs, including labor, transportation and customs
duty. Chemical damage is excluded from all warranty
coverage. See complete warranty for details.
0
36 Ft.
28 Ft.
1
31 Ft.
23 Ft.
2
27 Ft.
19 Ft.
3
25 Ft.
17 Ft.
4
23 Ft.
15 Ft.
To Locate a Distributor Near You, Please Visit www.whirlpoolcommerciallaundry.com/distributor, or call 1-800-NO-BELTS
TORX is a registered Trademark of Textron Industries, Inc.
®Registered trademark/™Trademark of Whirlpool, U.S.A. ©2010 Whirlpool Corporation. All rights reserved.
Whirlpool Corporation • Benton Harbor, Michigan 49022 U.S.A. CWLL119 10/10
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising