Eizo | FlexScan M1900 | User`s manual | Eizo FlexScan M1900 User`s manual

Eizo FlexScan M1900 User`s manual
PRECAUTIONS
Chapter 1 Features and Overview
1-1 Features
1-2 Buttons and Indicators
1-3 Functions and Basic Operation
Chapter 2 Settings and Adjustments
2-1 Utility Disk
2-2 Screen Adjustment
2-3 Color Adjustment
Important
2-4 Speaker Volume Adjustment
2-5 Off Timer/Power Saving Settings
2-6 EIZO Logo Display Setting
Please read this User’s Manual and Setup
Manual (separate volume) carefully to
familiarize yourself with safe and effective
usage.
2-7 Locking Buttons
2-8 Setting Adjustment menu Display
2-9 Viewing Information/Setting Language
2-10 Resumption of Default Setting
Chapter 3 Connecting Cables
3-1 Connecting Two PCs to the Monitor
3-2 Connecting Speaker
Chapter 4 Troubleshooting
Chapter 5 Reference
5-1 Attaching an Arm (Option)
5-2 Cleaning
5-3 Specifications
5-4 Glossary
5-5 Preset Timing
How to Setup
Please read the Setup Manual (separate volume)
SAFETY SYMBOLS
This manual uses the safety symbols below. They denote critical information. Please read them
carefully.
WARNING
Failure to abide by the information in a WARNING
may result in serious injury and can be life threatening.
CAUTION
Failure to abide by the information in a CAUTION
may result in moderate injury and/or property or
product damage.
Indicates a prohibited action.
Indicates to ground for safety.
Copyright© 2005 EIZO NANAO CORPORATION All rights reserved.
No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means,
electronic, mechanical, or otherwise, without the prior written permission of EIZO NANAO CORPORATION.
EIZO NANAO CORPORATION is under no obligation to hold any submitted material or information confidential
unless prior arrangements are made pursuant to EIZO NANAO CORPORATION’s receipt of said information
Although every effort has been made to ensure that this manual provides up-to-date information, please note that EIZO
monitor specifications are subject to change without notice.
ENERGY STAR is a U.S. registered mark.
Apple and Macintosh are registered trademarks of Apple Computer, Inc.
VGA is a registered trademark of International Business Machines Corporation.
DPMS is a trademark and VESA is a registered trademark of Video Electronics Standards Association.
Windows is a registered trademark of Microsoft Corporation.
PowerManager is a trademark of EIZO NANAO CORPORATION.
FlexScan, ScreenManager and EIZO are registered trademarks of EIZO NANAO CORPORATION.
As an ENERGY STAR® Partner, EIZO NANAO CORPORATION has determined that this product
meets the ENERGY STAR guidelines for energy efficiency.
PRECAUTIONS
IMPORTANT
• This product has been adjusted specifically for use in the region to which it was originally shipped. If the product is
used outside the region, it may not operate as specified in the specifications.
• To ensure personal safety and proper maintenance, please read carefully this section and the caution statements on
the monitor.
[Location of Caution Statement]
WARNING
If the unit begins to emit smoke, smells like something is burning, or makes
strange noises, disconnect all power connections immediately and contact
your dealer for advice.
Attempting to use a malfunctioning unit may result in fire, electric shock, or equipment
damage.
Do not open the cabinet or modify the unit.
Opening the cabinet or modifying the unit may result in fire, electric shock, or burn.
Refer all servicing to qualified service personnel.
Do not attempt to service this product yourself as opening or removing covers may result in
fire, electric shock, or equipment damage.
Keep small objects or liquids away from the unit.
Small objects accidentally falling through the ventilation slots into the cabinet or spillage into
the cabinet may result in fire, electric shock, or equipment damage.
If an object or liquid falls/spills into the cabinet, unplug the unit immediately. Have the unit
checked by a qualified service engineer before using it again.
PRECAUTIONS
1
WARNING
Place the unit at the strong and stable place.
A unit placed on an inadequate surface may fall and result in injury or equipment damage.
If the unit falls, disconnect the power immediately and ask your dealer for advice. Do not
continue using a damaged unit. Using a damaged unit may result in fire or electric shock.
Set the unit in an appropriate location.
Not doing so may result in fire, electric shock, or equipment damage.
• Do not place outdoors.
• Do not place in the transportation system (ship, aircraft, trains, automobiles, etc.)
• Do not place in a dusty or humid environment.
• Do not place in a location where the steam comes directly on the screen.
• Do not place near heat generating devices or a humidifier.
To avoid danger of suffocation, keep the plastic packing bags away from
babies and children.
Use the enclosed power cord and connect to the standard power outlet of your
country.
Be sure to remain within the rated voltage of the power cord.
Not doing so may result in fire or electric shock.
To disconnect the power cord, grasp the plug firmly and pull.
Tugging on the cord may damage and result in fire or electric shock.
The equipment must be connected to a grounded main outlet.
Failure to do so may result in fire or electric shock.
Use the correct voltage.
• The unit is designed for use with a specific voltage only. Connection to another voltage
than specified in this User’s Manual may cause fire, electric shock, or equipment damage.
• Do not overload your power circuit, as this may result in fire or electric shock.
2
PRECAUTIONS
OK
WARNING
Handle the power cord with care.
• Do not place the cord underneath the unit or other heavy objects.
• Do not pull on or tie the cord.
If the power cord becomes damaged, stop using it. Use of a damaged cord may result in fire
or electric shock.
Never touch the plug and power cord if it begins to thunder.
Touching them may result in electric shock.
When attaching an arm stand, please refer to the user’s manual of the arm
stand and install the unit securely with the enclosed screws.
Not doing so may cause the unit to become unattached, which may result in injury or
equipment damage. When the unit is dropped, please ask your dealer for advice. Do not
continue using a damaged unit. Using a damaged unit may result in fire or electric shock.
When reattaching the tilt stand, please use the same screws and tighten them securely.
Do not touch a damaged LCD panel directly with bare hands.
The liquid crystal that may leak from the panel is poisonous if it enters the eyes or mouth.
If any part of the skin or body comes in direct contact with the panel, please wash thoroughly.
If some physical symptoms result, please consult your doctor.
Follow local regulation or laws for safe disposal.
The backlight of the LCD panel contains mercury.
PRECAUTIONS
3
CAUTION
Handle with care when carrying the unit.
Disconnect the power cord and cables when moving the unit. Moving the unit with the cord
attached is dangerous. It may result in injury.
When handling the unit, grip the bottom of the unit firmly with both hands
ensuring the panel faces outward before lifting.
Dropping the unit may result in injury or equipment damage.
Do not block the ventilation slots on the cabinet.
• Do not place any objects on the ventilation slots.
• Do not install the unit in a closed space.
• Do not use the unit laid down or upside down.
Blocking the ventilation slots prevents proper airflow and may result in fire, electric shock, or
equipment damage.
Do not touch the plug with wet hands.
Doing so may result in electrical shock.
Use an easily accessible power outlet.
This will ensure that you can disconnect the power quickly in case of a problem.
Periodically clean the area around the plug.
Dust, water, or oil on the plug may result in fire.
Unplug the unit before cleaning it.
Cleaning the unit while it is plugged into a power outlet may result in electric shock.
If you plan to leave the unit unused for an extended period, disconnect the
power cord from the wall socket after turning off the power switch for the
safety and the power conservation.
4
PRECAUTIONS
LCD Panel
In order to suppress the luminosity change by long-term use and to maintain the stable luminosity, use of a monitor in
lower brightness is recommended.
The screen may have defective pixels. These pixels may appear as slightly light or dark areas on the screen. This is due
to the characteristics of the panel itself, and not the product defect.
The backlight of the LCD panel has a fixed life span. When the screen becomes dark or begins to flicker, please contact
your dealer.
Do not press on the panel or edge of the frame strongly, as this may result in damage to the screen. There will be prints
left on the screen if the pressed image is dark or black. If pressure is repeatedly applied to the screen, it may deteriorate
or damage your LCD panel. Leave the screen white to decrease the prints.
Do not scratch or press on the panel with any sharp objects, such as a pencil or pen as this may result in damage to the
panel. Do not attempt to brush with tissues as this may scratch the LCD panel.
When the monitor is cold and brought into a room or the room temperature goes up quickly, dew condensation
may occur inside and outside the monitor. In that case, do not turn the monitor on and wait until dew condensation
disappears, otherwise it may cause damage to the monitor.
To use the monitor comfortably
An excessively dark or bright screen may affect your eyes. Adjust the brightness of the monitor according to the
environmental conditions.
Staring at the monitor for a long time tires your eyes. Take a 10-minute rest every hour.
PRECAUTIONS
5
CONTENTS
PRECAUTIONS ...................................................... 1
2-6
EIZO Logo Display Setting............................ 19
● To display EIZO logo
LCD Panel................................................................... 5
To use the monitor comfortably ............................... 5
[EIZO Logo Appearing Function] ...................... 19
2-7
Locking Buttons ............................................ 19
● To lock operation [Adjustment Lock]................. 19
Chapter 1 Features and Overview ..................... 7
1-1
Features ............................................................ 7
1-2
Buttons and Indicators.................................... 7
1-3
Functions and Basic Operation...................... 8
2-8
Setting Adjustment menu Display................ 20
● To update menu settings [Menu Position/
Translucent/Menu Off Timer] ............................ 20
2-9
Viewing Information/Setting Language ....... 21
● To check settings, usage time, etc. .................. 21
● To set a language to be displayed
Chapter 2 Settings and Adjustments .............. 10
2-1
Utility Disk ...................................................... 10
[Language] ....................................................... 21
2-10 Resumption of Default Setting ..................... 21
● To reset color adjustment [Reset] ..................... 21
● Disk contents and software overview ............... 10
2-2
● To reset all settings [Reset] .............................. 21
Screen Adjustment .........................................11
Digital Input ...........................................................11
Chapter 3 Connecting Cables .......................... 22
Analog Input .........................................................11
3-1
2-3
Color Adjustment ........................................... 14
Connecting Two PCs to the Monitor ............ 22
● To set auto-switching of input signals
Simple adjustment [FineContrast menu] .......... 14
[Input Signal] .................................................... 23
● FineContrast Mode ........................................... 14
● To select FineContrast mode............................ 14
Advanced Adjustments [Adjustment menu] ..... 15
● To select an appropriate mode for images ....... 15
3-2
Connecting Speaker ...................................... 23
Chapter 4 Troubleshooting............................... 24
● To set/adjust color ............................................ 16
2-4
Speaker Volume Adjustment ........................ 16
● Adjust speaker volume [Volume] ...................... 16
Chapter 5 Reference ......................................... 26
5-1
Attaching an Arm (Option) ............................ 26
5-2
Cleaning.......................................................... 26
5-3
Specifications ................................................ 27
5-4
Glossary ......................................................... 29
5-5
Preset Timing ................................................. 31
● Mute the speaker temporarily [Mute] ................ 16
2-5
Off Timer/Power Saving Settings ................. 17
● To set monitor power-off time [Off Timer] ......... 17
● To set monitor power-saving
[VESA DPMS/DVI DMPM]................................ 17
● To mute the speaker with power-saving setting
[Power-saving mute]......................................... 18
6
CONTENTS
Chapter 1 Features and Overview
Thank you very much for choosing an EIZO color LCD monitor.
1-1
Features
• Dual-input compliant (DVI-D and D-sub mini 15-pin connectors)
• DVI digital input (TMDS) compliant
Resolution: 1280 dots × 1024 lines
• Easy screen adjustment with Auto Adjustment function
• FineContrast mode to allow the best mode for screen display
• Height adjustable stand
• sRGB compatible
• Built-in speaker
1-2
Buttons and Indicators
Buttons
Adjustment menu (*ScreenManager ® )
Input signal selection button
Auto adjustment button
Control buttons (Left, Down, Up, Right)
Enter button
FineContrast button
Power button
Power indicator
1.
2.
3.
4.
5.
6.
7.
8.
Indicator status
Operation status
Blue
The screen is displayed
Yellow
Power saving
Off
*
ScreenManager
NOTE
• For the power indicator status with
“Off Timer” set, refer to “To set
monitor power-off time” on page 17.
Power off
®
is an EIZO’s nickname of the Adjustment menu.
Chapter 1 Features and Overview
7
1-3
Functions and Basic Operation
To adjust the screen and color
Analog input only
1
Screen Adjustment
Page 11
Automatic Adjustment
Press .
Press
again while the message window is
displayed.
• The Adjustment menu and the FineContrast menu cannot
be displayed at the same time.
Adjustment menu (Refer to page 9 for operation)
2
Screen Adjustment
Page 11
Advaced Adjustment
[Adjustment menu]
FineContrast menu
Color Adjustment
Simple Adjustment [FineContrast mode]
Page 14
This function allows easy selection of a desired mode
from five modes according to monitor application.
● [Clock] to remove vertical bars …… see page 12
● [Phase] to remove horizontal flickering
and blur/distortion ………………… see page 12
● [Position] to correct screen position
……………………………………… see page 12
● [Range Adjustment] to adjust color
gradation automatically …………… see page 13
● [Smoothing*] to adjust blurred texts/lines
……………………………………… see page 13
*
● “Brightness,” “Temperature,” “Gamma,” “Saturation,”
“Hue,” and “Gain,” can be set for each mode (Custom/
sRGB/Text/Picture/Movie).
Settable functions vary with the display mode.
Brightness Adjustment
Press
or
or
to adjust brightness.
to adjust speaker volume.
Mute the speaker temporarily
Set mute with
or
window is displayed.
8
while the volume adjustment
Chapter 1 Features and Overview
Page 14
Color Adjustment
Advanced Adjustment [Adjustment menu]
Page 15
Speaker Volume Adjustment
Press
Function marked with * are also available for
digital input.
● “Brightness,” “Temperature,” “Gamma,”
“Saturation,” “Hue,” and “Gain” can be set for
each mode (Custom/sRGB/Text/Picture/Movie).
Settable functions vary with the display mode.
Resuming the default settings
● Reset color adjustment [Reset] …… see page 21
To make useful settings/adjustments
Adjustment menu (Refer to below for operation)
Speaker Volume Adjustment
Page 16
● [Volume] to adjust speaker volume
● [Mute] to mute the speaker temporarily
Power-saving Setting
Set the off timer
● [Off Timer] to set the monitor power off time
……………………………………… see page 17
Adjustment Menu Settings
● [Menu Position/Translucent/Menu Off Timer] to
change adjustment menu settings
……………………………………… see page 20
Resume the factory default settings
● [Reset] to reset all settings ………… see page 21
Connect two PCs
● [Input Signal] to set auto-switching of input signals
……………………………………… see page 22
Page 17
● [VESA DPMS/DVI DMPM] to set power-saving of
the monitor
● [Power-saving mute] to mute the speaker with
power-saving setting ……………… see page 18
Information/Language
Page 21
Locking Adjustment
● [Adjustment Lock] to lock operation of the
monitor ……………………………… see page 19
● [Information] to check settings, usage time, etc.
EIZO Logo Display Setting
● [EIZO Logo Appearing Function] to display or not
to display the EIZO logo …………… see page 19
Connecting Signal Cables
● 3-1 Connecting Two PCs to the Monitor
……………………………………… see page 22
● [Language] to select Adjustment mane’s
language.
Connecting Speaker
● To listen to audio …………………… see page 23
Basic operation of Adjustment menu
[Displaying Adjustment menu and selecting function]
(1) Press . The main menu appears.
(2) Select a function with / / / , and press . The sub menu appears.
(3) Select a function with / / / , and press . The adjustment/setting menu appears.
(4) Adjust the selected item with / / / , and press . The setting is saved.
[Exiting Adjustment menu]
(1) Choose <Return> from the sub menu and press , or press twice. The main menu appears.
(2) Choose <Menu Off> from the main menu and press , or press twice. The Adjustment menu quits.
NOTE
• The Adjustment menu can also be exited by pressing
twice quickly.
Chapter 1 Features and Overview
9
Chapter 2 Settings and Adjustments
2-1
Utility Disk
An “EIZO LCD Utility Disk” (CD-ROM) is supplied with the monitor. The following table shows the disk contents and
the overview of the application software programs.
● Disk contents and software overview
The disk includes a monitor information file, application software programs for adjustment, and User’s Manual. Refer to
“readme.txt” or the “Readme” file on the disk for software startup procedures or file access procedures.
Item
Overview
A “readme.txt” or “Readme” file
For Windows
For Macintosh
○
○
Monitor information file (INF file)
Available for setting the best resolution
and refresh rate for the monitor.
○
−
Color Profiles (ICC Profiles)
Color profiles
○
○
Screen Adjustment Program
Available for easy adjustments of the
monitor screen following adjustment
patterns and procedures on the
screen.
○
○
User’s Manual of this monitor (PDF file)
10
Chapter 2 Settings and Adjustments
2-2
Screen Adjustment
Digital Input
Attention
• Wait 20 minutes or more from
monitor power on before starting
adjustments.
(This period of time is required to
stabilize the operation of internal
electronic components.)
When digital signals are input, images are displayed correctly based on the
preset data of the monitor.
Analog Input
The monitor screen adjustment is used to suppress flickering of the screen or
adjust screen position and screen size correctly according to the PC to be used.
To use the monitor comfortably, adjust the screen when the monitor is set up for
the first time or when the settings of the PC in use are updated.
[Adjustment Procedure]
1
Press
NOTE
• Auto adjustment is available using
. If satisfactory adjustment cannot
be obtained with this button, perform
advanced adjustments using the
Adjustment menu.
.
A message “Your setting will be lost, if you press again now” appears for
five seconds.
Attention
2
Press
again while the message is displayed.
The Auto Adjustment function begins (showing a running status message)
to adjust clock, phase, display position, and resolution automatically.
If satisfactory adjustment cannot be obtained with the
button,
perform the adjustment following the procedure below. When the
screen is displayed correctly, go to step 5 “Range Adjustment”.
3
• This function works correctly when
an image is fully displayed over the
Windows or Macintosh display area.
It does not work properly when an
image is displayed only on a part of
the screen (DOS prompt window, for
example) or when a black background
(wallpaper, etc.) is in use.
• This function does not work correctly
with some graphics boards.
Run the Screen Adjustment Program.
Load the EIZO LCD Utility Disk on the PC, and start the Screen
Adjustment Program compatible with the PC in use.
After the program starts up, perform the adjustment in step 4 following the
instructions of the program.
NOTE
• For how to start the Screen
Adjustment Program, refer to
“readme.txt” or the “Readme” file.
When you are using a Windows PC,
you can run the program directly from
the start menu of the disk.
• If no adjustment program is available
for your PC, display a checkerboard
pattern on the screen (see below) and
go to the following steps.
Chapter 2 Settings and Adjustments
11
4
NOTE
Perform advanced adjustments for the following using the
<Screen> menu of the Adjustment menu.
● To eliminate vertical bars [Clock]
(1) Choose <Clock> from the <Screen> menu, and press
.
The <Clock> menu appears.
(2) Adjust the clock with
or
, and press
• Press the control button slowly so as
not to miss the adjustment point.
• When blurring, flickering or bars
appear on the screen after adjustment,
proceed to [Phase] to remove
flickering or blurring.
.
The adjustment is completed.
● To remove flickering or blurring [Phase]
(1) Choose <Phase> from the <Screen> menu, and press
Attention
• Flickering or blurring may not be
eliminated depending on your PC or
graphics board.
.
The <Phase> menu appears.
(2) Adjust the phase with
or
, and press
.
The adjustment is completed.
● To correct screen position [Position]
Since the number of pixels and the pixel positions are fixed on
the LCD monitor, only one position is provided to display images
correctly. The position adjustment is made to shift an image to the
correct position.
(1) Choose <Position> from the <Screen> menu, and press
.
The <Position> menu appears.
(2) Adjust the position with / / /
in the display area of the monitor.
12
Chapter 2 Settings and Adjustments
to display the image properly
NOTE
• When vertical bars appear on the
screen after adjustment, go back to
“To eliminate vertical bars [Clock].”
(Clock → Phase → Position)
5
Adjust the signal output range
● To adjust color gradation automatically [Range Adjustment]
Every color gradation (0 to 255) can be displayed by adjusting the
signal output level.
(1) Choose <Range Adjustment> from the <Screen> menu, and press
.
A message “Your setting will be lost it you press AUTO button” appears.
(2) Press
again while the message is displayed.
The output range is adjusted automatically to display images with the
maximum color gradation.
All the adjustments using the “Screen Adjustment Program” are completed.
Attention
6
Change the smoothing setting.
● To modify blurred characters/lines [Smoothing]
When a low-resolution image is displayed, the characters or lines of
the displayed image may be blurred.
• [Smoothing] is disabled when the
screen is displayed with a resolution
of 1280 × 1024.
• Blurring is not eliminated completely
because the screen is enlarged display.
(1) Choose <Screen> from the Adjustment menu, and press .
(2) Choose <Smoothing> from the <Screen> menu, and press .
The <smoothing> menu appears.
(3) Select a suitable level from 1 to 5 (where 1 = soft and 5 = sharp)
with or , and press .
The <smoothing> menu appears.
Chapter 2 Settings and Adjustments
13
2-3
Color Adjustment
Simple adjustment [FineContrast menu]
This function allows you to select the best display mode for monitor brightness,
etc.
● FineContrast Mode
An appropriate display mode is selectable out of five modes.
Mode
Purpose
Custom
Available for making desired setting.
sRGB
Suitable for color matching with sRGB compatible
peripherals.
Text
Suitable for displaying texts for word processing or
spreadsheets.
Picture
Suitable for displaying images such as photos or picture
images.
Movie
Suitable for playing back animated images.
FineContrast menu
Example: Custom
Displays current mode.
● To select FineContrast mode
(1) Press
NOTE
.
The FineContrast menu appears at the lower left of the screen.
(2) One of five modes is displayed in turn each time
(3) Press to quit the operation.
14
Chapter 2 Settings and Adjustments
is pressed.
• The Adjustment menu and the
FineContrast menu cannot be
displayed at the same time.
• This menu ends automatically when
five seconds pass after the
button
is pressed.
Attention
Advanced Adjustments [Adjustment menu]
Independent setting and saving of color adjustment are available for each
FineContrast mode.
● To select an appropriate mode for images
✓: Adjustment/setting available
Icon
−: Factory setting
Function
FineContrast mode
Custom
sRGB
Text
Picture
Movie
Brightness
✓
✓
✓
✓
✓
Temperature
✓
−
✓
✓
✓
Gamma
✓
−
✓
−
−
Saturation
✓
−
✓
✓
✓
Hue
✓
−
✓
✓
✓
Gain
✓
−
−
−
−
Reset
✓
−
✓
✓
✓
Menu
Brightness
Description
To adjust the full screen
brightness as desired
Adjustment range
0 to 100%
• Perform [Range Adjustment] before
starting color adjustment for analog
input signals.
Refer to “To adjust color gradation
automatically” on page 13.
• The FineContrast mode cannot be
changed during color adjustment. Set
the FineContrast mode in advance
with
.
• Wait 20 minutes or more from
monitor power on before starting the
color adjustment.
(It takes about 20 minutes for stable
operation of internal electronic
components.)
• Choose [Reset] from the Color menu
to revert to the default setting (factory
setting) of the color tone of the
FineContrast mode selected.
• The same image may be seen in
different colors on multiple monitors
due to their monitor-specific
characteristics. Make fine color
adjustment visually when matching
colors on multiple monitors.
NOTE
• You can also adjust the brightness by pressing
after adjustment.
Press
Temperature To select a color
temperature
or
.
4000K to 10000K in units of 500K
(including 9300K).
Default: Off (natural color of the
panel).
NOTE
• The values shown in the Kelvin (K) are available only as
reference.
• The setting automatically turns “OFF” if a value under 4,000K
or over 10,000K is set.
Gamma
To set a gamma value
NOTE
• The Adjustment menu and the
FineContrast menu cannot be
displayed at the same time.
• Adjustable functions vary depending
on the type of FineContrast mode.
1.8 to 2.6 (in increments of 0.2)
NOTE
• Digital signal input is recommended for gamma value setting.
Saturation
To adjust color saturation
–128 to 127
Setting the minimum (–128) turns
the image to a monochrome
screen.
Attention
• This function does not enable to display every color gradation.
Hue
To change the flesh color,
etc.
–32 to 32
Attention
• This function does not enable to display every color gradation.
Chapter 2 Settings and Adjustments
15
Menu
Gain
Description
Adjustment range
To adjust red, green, and
0 to 100%
blue to a desired color tone Adjust the respective brightness of
respectively
red/green/blue to make a desired
color tone. Display an image with
white or gray background for
adjustment.
NOTE
• Values shown in percentage are available only as reference.
• The <Temperature> setting invalidates this setting. The
<Gain> setting returns to the default setting.
Reset
To reset the color
settings of the selected
FineContrast mode to the
default settings.
Select [Reset].
● To set/adjust color
(1) Choose <Color> from the Adjustment menu, and press .
(2) Select a desired function from the <Color> menu, and press
.
The selected function menu appears.
(3) Adjust the selected item with
/ / /
, and press
.
The adjustment is completed.
2-4
Speaker Volume Adjustment
● Adjust speaker volume [Volume]
NOTE
• Volume adjustment or mute setting is
possible only by using , ,
or
. Refer to “1-3.Function and Basic
Operation” (page 8).
(1) Choose <Sound> from the Adjustment menu, and press .
(2) Choose <Volume> from the <Sound> menu, and press .
The volume adjustment window appears.
(3) Adjust speaker volume with
Change the speaker volume with
(4) Press
or
.
to decrease or
to increase.
at the desired volume.
The volume adjustment is completed.
● Mute the speaker temporarily [Mute]
[Setting]
(1) Choose <Sound> from the Adjustment menu, and press
(2) Choose <Mute> from the <Sound> menu, and press .
.
The Mute menu appears.
(3) Select “On” with
or
, and press
.
The mute setting is completed.
[Canceling]
Display the volume adjustment window and press
muting.
16
Chapter 2 Settings and Adjustments
or
to cancel
2-5
Off Timer/Power Saving Settings
● To set monitor power-off time [Off Timer]
This function allows the monitor to automatically turn off after a specified time
has passed. This function serves to reduce afterimages caused when the monitor
screen is left on for a long time period without use. Use this function when an
image is displayed throughout the day.
Attention
• The Off Timer functions even in the
power saving mode, but the advance
notice is disabled. The monitor power
is turned off without advance notice.
[Off Timer System]
Timer
Monitor
ON time (1H - 23H)
Operating
Last 15 min. in “ON time” Advance
“ON time” expired
Power Indicator
Blue
Notice*1
Flashing blue
Power Off
Off
*1 When
is pressed during the advance notice period, the monitor continues to operate for
additional 90 minutes. Extension of operation time can be set without limitation.
[Procedure]
(1) Choose <Others> from the Adjustment menu, and press .
(2) Choose <Off Timer> from the <Others> menu, and press .
The <Off Timer> menu appears.
(3) Select “Enable” with or .
(4) Set a monitor ON time (1 to 23 hours) with
or
, and press
.
The Off Timer setting is completed.
[Resumption Procedure]
Press .
● To set monitor power-saving [VESA DPMS/DVI DMPM]
■ Analog input
This monitor complies with the VESA DPMS standard.
Attention
[Power Saving System]
PC
Operating
Power
saving
Power
Indicator
Monitor
STAND-BY
SUSPENDED OFF
Operating
Blue
Power saving
Yellow
[Procedure]
(1) Choose <PowerManager> from the Adjustment menu, and press
• For the maximum power saving, it is
recommended that the Main Power
switch be turned off. Unplugging
the power cord completely shuts off
power supply to the monitor.
.
The <Set> menu appears.
(2) Select “VESA DPMS” with
or
, and press
.
The power saving setting is completed.
[Resumption Procedure]
Operate the mouse or keyboard to resume the normal screen.
Chapter 2 Settings and Adjustments
17
■ Digital input
This monitor complies with the “DVI DMPM” standard.
[Power Saving System]
PC
Operating
Power saving
Monitor
Operating
Power saving
Power Indicator
Blue
Yellow
[Procedure]
(1) Choose <PowerManager> from the Adjustment menu, and press
.
The <Set> menu appears.
(2) Select “DVI DMPM” with
or
, and press
.
The power saving setting is completed.
[Resumption Procedure]
Operate the mouse or keyboard.
● To mute the speaker with power-saving setting
[Power-saving mute]
The speaker output can be muted when the monitor enters the power-saving
mode.
(1) Perform the monitor power-saving setting.
(2) Choose <Sound> from the <PowerManager> menu, and press
The <Sound> menu appears.
(3) Select “Disable” with
or
, and press
.
The power-saving mute setting is completed.
To make the speaker output effective, select “Enable” and press
18
Chapter 2 Settings and Adjustments
.
.
2-6
EIZO Logo Display Setting
● To display EIZO logo [EIZO Logo Appearing Function]
NOTE
When this unit is turned on, the EIZO logo appears at the center of the screen.
Selection to display or not to display the logo is available with this function.
• The logo appears with the default
setting.
[Procedure]
(1) Press to power off the unit.
(2) Press again while pressing .
The EIZO logo does not appear on the screen.
[Resetting]
(1) Press to power off the unit.
(2) Press again while pressing .
The logo appears again.
2-7
Locking Buttons
● To lock operation [Adjustment Lock]
This function locks the buttons to retain the status adjusted or set once.
Buttons that can be
locked
(Enter button) Adjustments/settings using
Adjustment menu
•
(Auto Adjustment button)
Buttons that cannot
be locked
•
•
•
(Power button)
(FineContrast button) FineContrast menu selection/
adjustment
•
/ (Control buttons) Brightness adjustment
•
/ (Control buttons) Volume adjustment and mute
(Input Signal Selection button)
•
[Procedure]
(1) Press to turn off the unit.
(2) Press again while pressing
.
The screen is displayed with the adjustment lock.
[Unlocking]
(1) Press to turn off the unit.
(2) Press again while pressing
.
The screen is displayed with the adjustment lock released.
Chapter 2 Settings and Adjustments
19
2-8
Setting Adjustment menu Display
● To update menu settings [Menu Position/Translucent/Menu
Off Timer]
Menu Position
Adjust the menu position using the following procedure.
(1) Choose <Others> from the Adjustment menu, and press .
(2) Choose <Menu Settings> from the <Others> menu, and press .
(3) Choose <Menu Position> from the <Menu Settings> menu, and press
.
The <Menu Position> menu appears.
(4) Select a menu position with
/ /
/ , and press
.
The menu position setting is completed.
Translucent
Set the transparency for menu display using the following procedure.
(1) Choose <Others> from the Adjustment menu, and press .
(2) Choose <Menu Settings> from the <Others> menu, and press .
(3) Choose <Translucent> from the <Menu Settings> menu, and press
.
The <Translucent> menu appears.
(4) Adjust the transparency for menu display with
or
, and press
.
The transparency setting is completed.
Menu Off Timer
Set the menu display time using the following procedure.
NOTE
• The display time of the FineContrast
menu remains unchanged.
(1) Choose <Others> from the Adjustment menu, and press .
(2) Choose <Menu Settings> from the <Others> menu, and press .
(3) Choose <Menu Off Timer> from the <Menu Settings> menu, and press
The <Menu Off Time> menu appears.
(4) Choose “Enable” with or .
(5) Choose an Off Time (15/30/45/60 seconds) with
The menu off timer setting is completed.
20
Chapter 2 Settings and Adjustments
or
, and press
.
.
2-9
Viewing Information/Setting Language
● To check settings, usage time, etc.
[Information]
This function allows you to check settings, model name, serial number, and
usage time of the monitor.
(1) Choose <Information> from the Adjustment menu, and press
.
The <Information> menu appears.
(2) Then, press
to check settings, etc.
NOTE
• The usage time is not always “0”
when you purchase the monitor due
to factory inspection.
● To set a language to be displayed [Language]
Select the Adjustment menu language.
Selectable languages
English/German/French/Spanish/Italian/Swedish/Japanese
(1) Choose <Language> menu from the Adjustment menu, and press
.
The <Language> menu appears.
(2) Select a language with
/ /
/ , and press
.
The language setting is completed.
2-10 Resumption of Default Setting
● To reset color adjustment [Reset]
NOTE
Resume the default settings (factory settings) for color adjustment.
(1) Choose <Color> from the Adjustment menu, and press
(2) Choose <Reset> from the <Color> menu, and press .
.
• For default settings, refer to “Main
default settings (factory settings)” on
page 29.
The <Reset> menu appears.
(3) Select <Reset> with
or
, and press
.
The reset operation is completed.
● To reset all settings [Reset]
Reset all adjustments/settings to the factory default settings.
(1) Choose <Others> from the Adjustment menu, and press
(2) Choose <Reset> from the <Others> menu, and press .
.
The <Reset> menu appears.
(3) Select <Reset> with
or
, and press
.
The reset operation is completed.
Chapter 2 Settings and Adjustments
21
Chapter 3 Connecting Cables
3-1
Connecting Two PCs to the Monitor
Two PCs can be connected to the monitor through the DVI-I and the D-Sub
mini 15 pin connector on the back of the monitor.
Connection examples
DIV-D connector
(SIGNAL1)
D-sub mini
15-pin Connector
(SIGNAL2)
PC 1
PC 2
Digital
Signal cable
Signal cable
(FD-C39 supplied) (supplied
MD-C87)
D-sub mini 15-pin
Analog
DVI
Selecting input signal
Input Signal Selection button
Switch the input signal with . Input signal switches each time
is pressed.
When the signal is switched, the active signal type (Analog or Digital) appears
at the top right corner of the screen for two seconds.
22
Chapter 3 Connecting Cables
● To set auto-switching of input signals [Input Signal]
The monitor recognizes the connector through which PC signals are input.
When either PC is turned off or enters the power-saving mode, the monitor
automatically displays signals of another PC.
Priority setting
Function
Auto
When either PC is turned off or enters
the power-saving mode, the monitor
automatically displays signals of
another PC.
Manual
The monitor does not detect the PC’s
signals automatically. Select an active
input signal with
.
[Input signal setting]
(1) Choose <Others> from the Adjustment menu, and press .
(2) Choose <Input Signal> from the <Others> menu, and press
.
The <Input Signal> menu appears.
(3) Select “Auto” or “Manual” with
or
, and press
.
The Input Priority setting is completed.
3-2
1
Connecting Speaker
Connect the stereo mini-jack cable to the audio input
connector on the rear of the monitor.
2
Connect the other end of the cable to the audio output
connector of a peripheral device such as a PC or CD player.
Attention
• When connecting/disconnecting a
peripheral device (PC, CD player,
etc.) to/from the monitor, be sure to
turn off the monitor and the device.
• Use the supplied stereo mini-jack
cable to connect a peripheral device.
PC or CD player
● To listen to audio
The input audio can be listened to through speakers or headphones.
When headphones are connected, no audio is output from the
speakers.
Chapter 3 Connecting Cables
23
Chapter 4 Troubleshooting
If a problem still remains after applying the suggested remedies, contact your local dealer.
• No-picture problems → See No.1 - No.2.
• Imaging problems → See No.3 - No.11.
• Other problems → See No.12 - No.15.
Problems
1.
2.
Possible cause and remedy
No picture
• Power indicator does not light.
• Check whether the power cord is connected correctly. If
the problem persists, turn off the monitor, and then turn it
on again a few minutes later.
• Power indicator is lighting blue.
• Check brightness setting.
• Power indicator is lighting yellow.
• Turn on the PC.
• Switch the input signal with
.
• Operate the mouse or keyboard.
The message below appears for about 40 seconds. This message appears when the signal is not input
correctly even when the monitor functions properly.
• This message appears when no signal is input.
• The message shown left may appear, because some
PCs do not output the signal soon after power-on.
• Check whether the PC is turned on.
• Check whether the signal cable is connected properly.
• Switch the input signal with
.
• The message below shows that the input signal is
out of the specified frequency range. (Such signal
frequency is displayed in red.)
Example:
• Select an appropriate display mode using the graphics
board’s utility software. Refer to the manual of the
graphics board for details.
3.
Display position is incorrect.
• Align the top left corner of the image with the marker on
the screen using the <Position> adjustment.
• Choose a resolution (720 × 400 or 320 × 200) of the
signal that is input by <VGA Selection> to display the
screen at a proper position. This function is available
with a resolution of 720 × 400 or 320 × 200 only.
• If the problem persists, use the graphics board’s utility
software if available to change the display position.
4.
Vertical bars appear on the screen or a part of the
image is flickering.
• Adjust using <Clock> from <Screen> menu at the
Adjustment menu.
5.
Whole screen is flickering or blurring.
• Adjust using <Phase>.
6.
Characters are blurred.
• Adjust using <Smoothing>.
24
Chapter 4 Troubleshooting
Problems
Possible cause and remedy
7.
The screen is too bright or too dark.
• Adjust <Brightness>. (The LCD monitor backlight has a
fixed life span. When the screen becomes dark or begins
to flicker, contact your local dealer.)
8.
Afterimages appear.
• Use a screen saver or off timer function for a long-time
image display.
• Afterimages are particular to LCD monitors. Avoid
displaying the same image for a long time.
9.
Green/red/blue/white dots or defective dots remain • This is due to LCD panel characteristics and is not a
on the screen.
failure.
10. Interference patterns or fingerprints remain on the • Leave the monitor with a white screen. The symptom
screen.
may disappear.
11. The [Smoothing] icon on the Adjustment menu
[Screen] cannot be selected.
• <Smoothing> is disabled with a resolution of 1280 ×
1024
12. The Main menu of Adjustment menu does not start. • Check for Adjustment Lock function.
• Check whether the FineContrast menu is running. (Refer
to “Simple adjustment [FineContrast mode]” on page 15.)
13. The FineContrast menu does not start.
• Check whether the Main menu of Adjustment menu is
running. (Refer to “Advanced Adjustments [Adjustment
menu]” on page 16.)
14. The
• The
button does not function when digital signal is
input.
• Check whether the buttons are lockd.
• This function works correctly when an image is fully
displayed over the Windows or Macintosh display area.
It does not work properly when an image is displayed
only on a part of the screen (DOS prompt window, for
example) or when a black background (wallpaper, etc.) is
in use.
This function does not work correctly with some graphics
boards.
button does not function.
15. No audio.
• Check whether the stereo mini-jack cable is connected
properly.
• Check whether <Volume> is set to “0”.
• Check whether <Mute> is set to “On”.
• Check the settings of the PC and the audio software.
Chapter 4 Troubleshooting
25
Chapter 5 Reference
5-1
Attaching an Arm (Option)
The stand can be removed and replaced with an arm (or another stand) to be
attached to the monitor. Use an arm or stand of EIZO option.
[Attaching]
1
Lay the LCD monitor on a soft cloth spread over on a stable
surface with the panel surface facing down.
2
Remove the stand. (Prepare a screwdriver.)
Unscrew the two screws (M4 × 10mm) securing the unit and the stand
with the screwdriver.
3
Attention
• When using another manufacturer’s
arm or stand, confirm the following in
advance.
• Clearance between the holes of the
arm fixing screws: 100 mm × 100
mm (VESA compliant)
• Strong enough to support weight of
the monitor unit (except the stand)
and attachments such as cables
• Connect the cables after attaching an
arm.
Attach the monitor to the arm or stand.
Secure the stand to the monitor with four screws (M4 × 12mm) using a
screwdriver.
Arm
DVI
D-SUB
Fixing screws: M4 × 12mm 4 pcs
5-2
Cleaning
Clean the monitor periodically to keep the monitor clean and extend its life.
Cabinet
Clean the cabinet with a soft cloth dampened with little mild detergent.
LCD Panel
• Clean the LCD panel with a soft cloth such as cotton cloth or lens cleaning
paper.
• Remove persistent stains gently with a cloth dampened with little water, and
then clean the LCD panel again with a dry cloth for better finishing.
26
Chapter 5 Reference
Attention
• Never use any solvents or chemicals,
such as thinner, benzene, wax,
alcohol, and abrasive cleaner, which
may damage the cabinet or LCD
panel.
NOTE
• Optional ScreenCleaner is
recommended for cleaning the panel
surface.
5-3
Specifications
LCD Panel
19.0-inch (480 mm) TFT color LCD with anti-glare hard coating
Viewing angle: Horizontal: 170°; Vertical: 155° (CR>5)
Dot Pitch
0.294 mm
Horizontal Scan Frequency
Analog: 24.8 - 80 kHz (Automatic)
Digital: 31 - 64 kHz
Vertical Scan Frequency
Analog: 50 - 75.1 Hz (Automatic)
Digital: 59 - 61 Hz
(VGA TEXT: 69 - 71 Hz)
Resolution
1280 dots × 1024 lines
Max. Dot Clock
Analog: 135 MHz
Digital: 108 MHz
Max. Display Colors
16 million colors
Display Area (H × V)
376.3 mm × 301 mm
Power Supply
100 - 120 VAC ± 10% 50/60 Hz 0.8 A
200 - 240 VAC ± 10% 50 Hz 0.45 A
Power Consumption
Max.: 50 W (normal mode)
Mini.: 45 W (normal mode)
Power saving mode: 2 W or less (for single signal input)
Power button Off: 1 W or less
Input Signal Connectors
DVI-D connector, D-sub mini 15-pin connector
Analog Input Signal (Video)
Separate, TTL, positive/negative
Digital Input Signal
TMDS (Single Link)
Video Signal Memory
45 (preset: 20)
Plug & Play
VESA DDC 2B
Max. amplifier output
1W+1W
Line input
Input impedance: 47 kΩ (typical)
Input sensitivity: 500 mV
Headphone output level
6 mW + 6 mW (amplifier output: 1 W + 1 W)
Dimensions (Main unit)
415 mm (W) × 406 - 456 mm (H) × 216 mm (D) (16.3” (W) × 16.0” - 18.0” (H) × 8.5” (D))
Dimensions (without stand)
415 mm (W) × 374 mm (H) × 54 mm (D) (16.3” (W) × 14.7” (H) × 2.1” (D))
Weight (Main unit)
6.3 kg (13.9 lbs)
Weight (without stand)
4.8 kg (10.6 lbs)
Environmental Conditions
Operating temperature: –0 °C - 35 °C (32 °F - 95 °F)
Storage temperature: –20 °C - 60 °C (–4 °F - 140 °F)
Relative humidity: 30% - 80% (no condensation)
Chapter 5 Reference
27
Main default settings (factory settings)
Analog Input
Digital Input
Brightness
100%
100%
Smoothing
3
FineContrast Mode
Custom
PowerManager
VESA DPMS
Input Signal
Auto
Off Timer
Disabled
Language
English
DVI DMPM
Outside Dimensions
unit : mm (inch)
Connector Pin Assignment
• DIV-D connector
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
Pin No.
Signal
Pin No.
Signal
Pin No.
Signal
1
TMDS Data 2-
11
TMDS Data1/3 Shield
21
NC*
2
TMDS Data 2+
12
NC*
22
TMDS Clock shield
3
TMDS Data2/4 Shield
13
NC*
23
TMDS Clock+
4
NC*
14
+5V Power
24
TMDS Clock-
5
NC*
15
Ground (For +5V)
C1
Analog Red
6
DDC Clock (SCL)
16
Hot Plug Detect
C2
Analog Green
7
DDC Data (SDA)
17
TMDS Data0-
C3
Analog Blue
8
NC*
18
TMDS Data0+
C4
Analog Horizontal Sync
9
TMDS Data1-
19
TMDS Data0/5 Shield
C5
Analog Ground (analog
R,G,&B return)
10
TMDS Data1+
20
NC*
(NC*: No Connection)
28
Chapter 5 Reference
• D-sub mini 15-pin connector
3
4
5
10
15
9
1
2
8
7
6
14 13 12 11
Pin No.
Signal
Pin No.
Signal
Pin No.
Signal
1
Red
6
Red ground
11
(Short-circuited to pin 10)
2
Green
7
Green ground
12
Data (SDA)
3
Blue
8
Blue ground
13
H. Sync
4
Ground
9
NC
14
V. Sync
5
NC
10
Ground
15
Clock (SCL)
Option List
Cleaning Kit
5-4
EIZO ScreenCleaner
Glossary
Clock
The analog input monitor needs to reproduce a clock of the same frequency as the dot clock of the graphics system in
use, when the analog input signal is converted to a digital signal for image display.
This is called clock adjustment. If the clock pulse is not set correctly, some vertical bars appear on the screen.
DVI (Digital Visual Interface)
DVI is a digital interface standard. DVI allows direct transmission of the PC’s digital data without loss.
This adopts the TMDS transmission system and DVI connectors. There are two types of DVI connectors. One is
a DVI-D connector for digital signal input only. The other is a DVI-I connector for both digital and analog signal
inputs.
DVI DMPM (DVI Digital Monitor Power Management)
DVI DMPM is a digital interface power-saving function. The “Monitor ON (operating mode)” and “Active Off
(power-saving mode)” are indispensable for DVI DMPM as the monitor’s power mode.
Gain
This is used to adjust each color parameter for red, green and blue. An LCD monitor displays the color by the light
passing through the panel color filter. Red, green and blue are the three primary colors. All the colors on the screen
are displayed by combining these three colors. The color tone can be changed by adjusting the light intensity (volume)
passing through each color’s filter.
Gamma
Generally, the monitor brightness varies nonlinearly with the input signal level, which is called “Gamma
Characteristic”. A small gamma value produces a low-contrast image, while a large gamma value produces a highcontrast image.
Chapter 5 Reference
29
Phase
Phase means the sampling timing to convert the analog input signal to a digital signal. Phase adjustment is made to
adjust the timing. It is recommended that phase adjustment be made after the clock is adjusted correctly.
Range Adjustment
Range adjustment controls the signal output levels to display every color gradation. It is recommended that range
adjustment be made before color adjustment.
Resolution
The LCD panel consists of numerous pixels of specified size, which are illuminated to form images. The EIZO
M1900 monitor consists of 1280 horizontal pixels and 1024 vertical pixels. At a resolution of 1280 × 1024, all pixels
are illuminated as a full screen (1:1).
sRGB (Standard RGB)
International standard for “color reproduction and color space” among peripheral devices (such as monitors, printers,
digital cameras, scanners). sRGB allows Internet users to closely match colors as a simple color matching means for
the Internet use.
Temperature
Color temperature is a method to measure the white color tone, generally indicated in degrees Kelvin. The screen
becomes reddish at a low temperature, and bluish at a high temperature, like the flame temperature.
5000K: Slightly reddish white
6500K: Warm white like paper white
9300K: Slightly bluish white
TMDS (Transition Minimized Differential Signaling)
A signal transmission system for digital interface.
VESA DPMS (Video Electronics Standards Association - Display Power Management Signaling)
VESA provides the standardization of signals from PC (graphics board) for power saving of PC monitors. DPMS
defines the signal status between PC and monitor.
30
Chapter 5 Reference
5-5
Preset Timing
The following table shows factory preset video timing.
Mode
VGA Graphic 320×200
VGA TEXT 720×400
28.3 MHz
VGA 640×480
25.2 MHz
Macintosh 640×480
30.2 MHz
Macintosh 832×624
57.3 MHz
Macintosh 1152×870
100.0 MHz
Macintosh 1280×960
126.2 MHz
VESA 640×480
31.5 MHz
VESA 640×480
31.5 MHz
VESA 800×600
VESA 800x600
36.0 MHz
40.0 MHz
VESA 800×600
50.0 MHz
VESA 800×600
49.5 MHz
VESA 1024×768
VESA 1024×768
65.0 MHz
75.0 MHz
VESA 1024×768
78.8 MHz
VESA 1152×864
108.0 MHz
VESA 1280×960
108.0 MHz
VESA 1280×1024
VESA 1280×1024
Frequency
Horizontal: kHz
Vertical: Hz
Polarity
Horizontal
31.5
Negative
Vertical
70.1
Positive
Horizontal
31.47
Negative
Dot clock
25.2 MHz
108.0 MHz
135.0 MHz
Attention
Vertical
70.09
Positive
Horizontal
31.47
Negative
Vertical
59.94
Negative
Horizontal
35
Negative
Vertical
66.67
Negative
Horizontal
49.72
Negative
Vertical
74.55
Negative
Horizontal
68.68
Negative
Vertical
75.06
Negative
Horizontal
74.76
Positive
Vertical
74.76
Positive
Horizontal
37.86
Negative
Vertical
72.81
Negative
Horizontal
37.5
Negative
Vertical
75
Negative
Horizontal
35.16
Positive
Vertical
56.25
Positive
Horizontal
37.88
Positive
Vertical
60.32
Positive
Horizontal
48.08
Positive
Vertical
72.19
Positive
Horizontal
46.88
Positive
Vertical
75
Positive
Horizontal
48.36
Negative
Vertical
60
Negative
Horizontal
56.48
Negative
Vertical
70.07
Negative
Horizontal
60.02
Positive
Vertical
75.03
Positive
Horizontal
67.5
Positive
Vertical
75
Positive
Horizontal
60
Positive
Vertical
60
Positive
Horizontal
63.98
Positive
Vertical
60.02
Positive
Horizontal
79.98
Positive
Vertical
75.03
Positive
• Display position may be deviated
depending on the PC connected,
which may require screen adjustment
using Adjustment menu.
• If a signal other than those listed in
the table is input, adjust the screen
using the Adjustment menu. However,
screen display may still be incorrect
even after the adjustment.
• When interlace signals are used, the
screen cannot be displayed correctly
even after screen adjustment using the
Adjustment menu.
Chapter 5 Reference
31
[Applicable to gray cabinet.]
Congratulations!
The display you have just purchased carries the TCO’03 Displays label. This
means that your display is designed, manufactured and tested according to
some of the strictest quality and environmental requirements in the world.
This makes for a high performance product, designed with the user in focus
that also minimizes the Impact on our natural environment.
Some of the features of the TCO’03 Display requirements:
Ergonomics
● Good visual ergonomics and image quality in order to improve the working environment for the user
and to reduce sight and strain problems. Important parameters are luminance, contrast, resolution,
reflectance, colour rendition and image stability.
Energy
● Energy-saving mode after a certain time - beneficial both for the user and environment
● Electrical safety
Emissions
● Electromagnetic fields
● Noise emissions
Ecology
● The products must be prepared for recycling and the manufacturer must have a certified environmental
management system such as EMAS or ISO 14000
● Restrictions on
● chlorinated and brominated flame retardants and polymers
● heavy metals such as cadmium, mercury and lead.
The requirements includes in this label have been developed by TCO Development in co-operation with scientists,
experts, users as well as manufacturers all over the world. Since the end of the 1980s TCO has been involved in
influencing the development of IT equipment in a more user-friendly direction. Our labeling system with displays
in 1992 and is now requested by users and IT-manufacturers all over the world.
For more information, please visit
www.tcodevelopment.com
32
Chapter 5 Reference
[Applicable to black cabinet.]
Congratulations!
You have just purchased a TCO’99 approved and labelled product! Your choice has
provided you with a product developed for professional use. Your purchase has also
contributed to reducing the burden on the environment and also to the further development
of environmentally adapted electronics products.
Why do we have environmentally labelled computers?
In many countries, environmental labelling has become an established method for encouraging the adaptation of
goods and services to the environment. The main problem, as far as computers and other electronics equipment
are concerned, is that environmentally harmful substances are used both in the products and during their
manufacture. Since it is not so far possible to satisfactorily recycle the majority of electronics equipment, most of
these potentially damaging substances sooner or later enter nature.
There are also other characteristics of a computer, such as energy consumption levels, that are important from
the viewpoints of both the work (internal) and natural (external) environments. Since all methods of electricity
generation have a negative effect on the environment (e.g. acidic and climate-influencing emissions, radioactive
waste), it is vital to save energy. Electronics equipment in offices is often left running continuously and thereby
consumes a lot of energy.
What does labelling involve?
This product meets the requirements for the TCO’99 scheme which provides for international and environmental
labelling of personal computers. The labelling scheme was developed as a joint effort by the TCO (The Swedish
Confederation of Professional Employees), Svenska Naturskyddsforeningen (The Swedish Society for Nature
Conservation) and Statens Energimyndighet (The Swedish National Energy Administration).
Approval requirements cover a wide range of issues: environment, ergonomics, usability, emission of electric and
magnetic fields, energy consumption and electrical and fire safety.
The environmental demands impose restrictions on the presence and use of heavy metals, brominated and
chlorinated flame retardants, CFCs (freons) and chlorinated solvents, among other things. The product must be
prepared for recycling and the manufacturer is obliged to have an environmental policy which must be adhered to
in each country where the company implements its operational policy.
The energy requirements include a demand that the computer and/or display, after a certain period of inactivity,
shall reduce its power consumption to a lower level in one or more stages. The length of time to reactivate the
computer shall be reasonable for the user.
Labelled products must meet strict environmental demands, for example, in respect of the reduction of electric
and magnetic fields, physical and visual ergonomics and good usability.
You will find a brief summary of the environmental requirements met by this product on the right. The complete
environmental criteria document may be ordered from:
TCO Development
SE-114 94 Stockholm, Sweden
Fax: +46 8 782 92 07
Email (Internet): development @ tco. se
Current information regarding TCO’99 approved and labelled products may also be obtained via the Internet, using
the address: http://www.tcodevelopment.com/
Chapter 5 Reference
33
For U.S.A. , Canada, etc. (rated 100-120 Vac) Only
FCC Declaration of Conformity
We, the Responsible Party
EIZO NANAO TECHNOLOGIES INC.
5710 Warland Drive, Cypress, CA 90630
Phone: (562) 431-5011
declare that the product
Trade name: EIZO
Model: FlexScan M1900
is in conformity with Part 15 of the FCC Rules. Operation of this product is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures.
*
*
*
*
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
Note
Use the attached specified cable below or EIZO signal cable with this monitor so as to keep interference within the
limits of a Class B digital device.
- AC Cord
- Shielded Signal Cable (D-SUB mini 15 pin - D-SUB mini 15 pin, the enclesed signal cable)
- Stereo mini-jack cable
Canadian Notice
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de le classe B est comforme à la norme NMB-003 du Canada.
34
Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor
Dieser Monitor ist für Bildschirmarbeitsplätze vorgesehen. Wenn nicht der zum Standardzubehör gehörige
Schwenkarm verwendet wird, muss statt dessen ein geeigneter anderer Schwenkarm installiert werden. Bei der
Auswahl des Schwenkarms sind die nachstehenden Hinweise zu berücksichtigen:
Der Standfuß muß den nachfolgenden Anforderungen entsprechen:
a) Der Standfuß muß eine ausreichende mechanische Stabilität zur Aufnahme des Gewichtes vom Bildschirmgerät
und des spezifizierten Zubehörs besitzen. Das Gewicht des Bildschirmgerätes und des Zubehörs sind in der
zugehörenden Bedienungsanleitung angegeben.
b)Die Befestigung des Standfusses muß derart erfolgen, daß die oberste Zeile der Bildschirmanzeige nicht höher
als die Augenhöhe eines Benutzers in sitzender Position ist.
c) Im Fall eines stehenden Benutzers muß die Befestigung des Bildschirmgerätes derart erfolgen, daß die Höhe der
Bildschirmmitte über dem Boden zwischen 135 – 150 cm beträgt.
d)Der Standfuß muß die Möglichkeit zur Neigung des Bildschirmgerätes besitzen (max. vorwärts: 5°, min. nach
hinten ≥ 5°).
e) Der Standfuß muß die Möglichkeit zur Drehung des Bildschirmgerätes besitzen (max. ±180°). Der maximale
Kraftaufwand dafür muß weniger als 100 N betragen.
f) Der Standfuß muß in der Stellung verharren, in die er manuell bewegt wurde.
g)Der Glanzgrad des Standfusses muß weniger als 20 Glanzeinheiten betragen (seidenmatt).
h)Der Standfuß mit Bildschirmgerät muß bei einer Neigung von bis zu 10° aus der normalen aufrechten Position
kippsicher sein.
Hinweis zur Ergonomie :
Dieser Monitor erfüllt die Anforderungen an die Ergonomie nach EK1-ITB2000 mit dem Videosignal, 1280 ×
1024 (M1900) RGB analog, 0,7 Vp-p und mindestens 75,0 Hz Bildwiederholfrequenz, non interlaced. Weiterhin
wird aus ergonomischen Gründen empfohlen, die Grundfarbe Blau nicht auf dunklem Untergrund zu verwenden
(schlechte Erkennbarkeit, Augenbelastung bei zu geringem Zeichenkontrast.)
„Maschinenlärminformations-Verordnung 3. GPSGV:
Der höchste Schalldruckpegel beträgt 70 dB(A) oder weniger gemäss EN ISO 7779“
35
Recycle Auskunft
Die Rücknahme dieses Produktes nach Nutzungsende übernimmt EIZO in Deutschland zusammen mit dem
Partner eds-r gmbh rucknahmesysteme. Dort werden die Geräte in ihre Bestandteile zerlegt, die dann der
Wiederverwertung zugeführt werden. Um einen Abholtermin zu vereinbaren und die aktuellen Kosten zu erfahren,
benutzen Sie bitte folgende Rufnummer: 02153-73 35 00. Weitere Informationen finden Sie auch unter der
Internet-Adresse: www.eizo.de.
Recycling Information for customers in Switzerland:
All recycling information is placed in the SWICO’s website.
http://www.swico.ch
Recycling-Information für Kunden in der Schweiz:
Alle Informationen zum Thema Recycling finden Sie auf der Homepage des Brancheverbandes SWICO.
http://www.swico.ch
Renseignements de recyclage pour les clients en Suisse:
Vous trouvez tous les renseignements pour le sujet de recyclage sur la page WEB de I’UNION DE BRAN CHE
SWICO.
http://www.swico.ch
Recycling Information for customers in USA:
All recycling information is placed in the EIZO Nanao Technologies, Inc’s website.
http://www.eizo.com
Återvinnings information för kunder i Sverige:
All information om återvinning finns på Eizo Europe AB:s hemsida:
www.eizo.se
36
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising