Panasonic MCO-170 AICL, AICUVL, AICUVHL CO2 Incubator Operating Instructions

Below you will find brief information for CO2 Incubator MCO-170 AICL, CO2 Incubator MCO-170 AICUVL and CO2 Incubator MCO-170 AICUVHL. The Panasonic MCO-170 series CO2 Incubators provide a variety of features that can be used to create a stable and reliable environment for cell cultures. They are equipped with a touch screen interface and various alarm systems to ensure safe operation. In addition, the incubator can be upgraded with optional features such as an electric lock, an automatic CO2 gas supply line changeover kit, and a gas auto-calibration kit.

PDF Download
Document
CO2 Incubator MCO-170 AICL, AICUVL, AICUVHL Operating Instructions | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Touch screen interface
  • Various alarm systems
  • Electric lock (optional)
  • Automatic CO2 gas supply line changeover kit (optional)
  • Gas auto-calibration kit (optional)
  • UV lamp disinfection
  • H2O2 decontamination
  • Temperature and CO2 density control
  • Humidity control
  • Data logging

Frequently asked questions

Refer to page 19 for instructions on connecting a CO2 gas cylinder to the incubator. Ensure that the gas pressure is set at 0.03 MPa(G) (0.3 kgf/cm2(G), 4.3 psi(G)).

Refer to page 20 for instructions on cleaning the incubator chamber before first use. It is important to use a mild neutral detergent and rinse thoroughly with distilled water. Do not use detergents or antiseptic solutions with acid, alkali, or chlorine.

The humidifying pan should be filled with sterile distilled water to maintain humidity in the chamber. Refer to page 24 for instructions on filling the pan.

To prevent contamination, choose a suitable installation site with low humidity and keep the chamber clean. Use sterile distilled water in the humidifying pan. Refer to page 25 for a comprehensive overview of contamination prevention methods.
Preparing document for printing…
0%