Martin | MAC 300 | MAC 500 - Creative Staging

MAC 500 - Creative Staging
MAC 500
MAC 500
The MAC 500 is a powerful automated moving
head profile spot luminaire with a reputation
for road-proven durability. This industry
workhorse is one of the most successful
automated moving heads in the lighting
industry.
The MAC 500 offers an impressive array of
effects and is used wherever sharp-edged
profile projection is needed. Specified the
world over in a variety of applications, the
MAC 500 has an unmatched performance and
specification.
Iris, Prism, Focus
A motorized iris, rotating 3-facet bi-directional prism
and motorized focus are incorporated to enhance
beam effects.
Motorized focus of the optical bank allows for very
sharp and clear projection. Smooth crossfades are
possible as well as immediate changes in projection
length. The focus ranges from 2 meters to infinity.
Two Color Wheels
Easily replaceable gobos
Dual color wheels combine to produce 67 different
color shades. One wheel offers 9 easily replaceable
color slots. Color Temperature Correction (CTC) filters
are included as well.
Two Projection Wheels
One wheel houses 5 replaceable indexible rotating
gobos. The second wheel is fixed with 9 replaceable
gobo slots.
Gobos are replaced in seconds by simply removing a
single spring mechanism and then removing the gobo
slot.
MAC 500
Lamp
Optics
Achromatic lenses provide hard-edged 17˚ and 23.5˚
beam angles. A unique bayonet mounting system
makes beam angle changes a breeze.
A powerful 575 Watt discharge lamp provides 2000
hours of lamp life. The MAC 500 accepts four different
lamp models from two top industry manufacturers.
Dimmer and Shutter
A combined microstep-driven, full range dimmer/
shutter can strobe up to 23 Hz. It provides fluid, linear
or simulated tungsten dimming curves.
LED Display
A 4-digit LED readout allows the user to customize
settings for easy programming. Error messages are
easily understood, lamp and fixture usage is displayed
and the readout flips for easy reading in any position.
MAC 500
456
447
456
447
17°
17°
Elevations
437
437
558
558
Pan and Tilt
145
145
The lumination head features 440˚ of horizontal pan
and 306˚ of vertical tilt. Self-adjusting motor belts
356
420quick adjustments.
insure smooth and
356
O
1
OUT
IN
O
1
OUT
IN
420
481
220˚
481
153˚
153˚
220˚
481
696
673
Service Friendly
O
1
OUT
IN
356
Convenient 1/2 turn screws make for easy component
accessibility and simple lamp adjustments.
Rigging
45°
All dimensions in mm.
256
Dedicated anchoring points, a quarter-turn fastening
system and mid-pan-range locator make for versatile
and trouble-free rigging.
MAC 500
Optional 23.5° Lens
Luminous intensity (cd)
Luminous intensity (cd)
Standard 17° Lens
-12˚
-9˚
-6˚
-3˚
0
3
6
9
12
-12˚
-9˚
-6˚
Degrees from center
-3˚
0
3
6
9
12
30
35
40
30
35
40
Illuminance (lux or fc)
Illuminance (lux or fc)
Degrees from center
0
5
10
15
20
25
30
35
40
0
5
10
15
20
25
Distance (m or ft)
Field diameter (m or ft)
Field diameter (m or ft)
Distance (m or ft)
0
5
10
15
20
25
30
35
40
0
5
10
15
20
25
Distance (m or ft)
Distance (m or ft)
Illuminance (lux or fc) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .245,826 cd / distance2 (m or ft)
Diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.30 x distance
Field angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17°
Measurement conditions . . . . . . . . . . . . . . . . . . .230 V, 50 Hz; no color or effects applied
Measurement source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Philips MSR 575/2
Illuminance (lux or fc) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134,298 / distance2 (m or ft)
Diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.42 x distance
Field angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23.5°
Measurement conditions . . . . . . . . . . . . . . . . . . .230 V, 50 Hz; no color or effects applied
Measurement source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Philips MSR 575/2
The MAC 500 is also available in an electronic ballast version, the MAC 500 E.
Distinguishing characteristics of the MAC 500 E
Description for MAC 500 E
The MAC 500 E is an electronic ballast
version of the MAC 500 automated
moving head profile spotlight. In addition to the regular features of the
MAC 500,the electronic ballast provides
flicker-free operation, an economic
power-saving mode, compatibility with
100 and 120 volt AC supplies, and
considerably lighter weight.
Physical
• Length: 356 mm (14.0 in)
• Width: 481 mm (18.9 in)
• Height (head at maximum tilt)
673 mm (26.5 in)
• 26.1 kg (57.4 lbs)
AC Supply
©November 2002 Martin Professional A/S
• AC input: 3 m trailing cable w/o
cord cap
• Wiring options, MAC 500 E:
100/110/120/210/220/230/240 V,
50-60 Hz
Ordering information
• MAC 500 E, black: 90215200
• MAC 500 E, white: 90215338
Maximum power and current
Option
100 V, 50-60 Hz
110 V, 50-60 Hz
120 V, 50-60 Hz
210 V, 50-60 Hz
220 V, 50-60 Hz
230 V, 50-60 Hz
240 V, 50-60 Hz
Watts
730
725
715
700
700
700
700
Amps
8.5
7.6
7.2
3.4
3.3
3.2
3.1
Specification
Specifications are subject to change without notice
General
The luminaire is an automated yokemounted profile spotlight, with electronic ballast, that employs a 575 Watt
discharge lamp as the light source.
Electrical
The luminaire operates on 50 Hz and
60 Hz supplies at 100, 110, 120, 200,
210, 220, 230, and 240 volts; +/- five
percent. It is fitted with a 3 meter (9.8
ft.) length of three conductor 1.5 sq.
mm (16 AWG) electrical cable for connection to AC power. The luminaire
must be electrically grounded.
The luminaire, without operator intervention, reduces lamp power 40 percent within ten seconds of being set to
blackout condition. Lamp power is
restored to full without visible delay
upon opening of the dimmer.
The luminaire conforms with CE standards EN 60598-1 and EN 60598-2-17
for safety, and with CE standards EN 50
081-1 and EN 50 082-1 for electromagnetic compatibility.
Physical
Size (head at maximum tilt): 356 x 481
x 673 mm (14.0 x 18.9 x 26.5 in)
Weight: 26.1kg (57.4 lbs)
Specifications
Description
AC Supply
Ordering information
The MAC 500 is an automated moving
head profile spotlight designed for a
575 Watt discharge source. It provides
18 combinable dichroic color filters,
nine replaceable static and five replaceable indexed-rotation gobos,
variable iris and focus, rotating threefacet prism, continuous full-range
dimming, strobe effects up to 23 Hz,
and 16-bit resolution movement.
• AC input: 3 m trailing cable w/o
cord cap
• Wiring options, MAC 500:
200/230/245 V, 50 Hz; 208/227 V, 60 Hz
• Maximum power and current
• MAC 500, black: 90215000
• MAC 500, white: 90215032
Physical
• Length: 356 mm (14.0 in)
• Width: 481 mm (18.9 in)
• Height (head at maximum tilt)
673 mm (26.5 in)
• Weight: 32.8 kg (72.2 lbs)
Source
©November 2002 Martin Professional A/S
• Lamp: 575 W discharge
• Base: GX 9.5
• Approved models: Philips MSR 575/2,
MSD 575; Osram HSR 575/2, HSD 575
• Control: automatic and/or remote
on/off
Performance
• Light output: (standard lens, MSR
575/2 lamp) 9000 lumens
Gobos
• Diameter: 27.9 mm + 0.0 / - 0.3 mm
(1.098 in. + 0.000 / - 0.012 in.)
• Maximum image diameter: 23 mm
(0.905 in.)
• Thickness, rotating: 0.5 to 4 mm
(0.020 to 0.157 in.)
• Thickness, static: 0.5 mm (0.020 in.)
• Glass type: high-temperature Borofloat
or better
• Glass coating: dichroic or enhanced
aluminum
• Metal type: aluminum (steel ok for
short-term use)
Thermal
Specifications are subject to change without notice
• Maximum ambient temperature (Ta):
40° C (104° F)
• Maximum surface temperature:
80° C (176° F)
• Total heat dissipation: 2660 Btu/hr
Control and programming
• Control options: USITT DMX-512,
Martin RS485
• Setting and addressing: LED control
panel, remote with MP-2 Uploader
• Firmware update: serial upload (MUF)
• Pan/tilt resolution: 8- or 16-bit
• DMX speed control: tracking and/or
vector
• DMX channels: 12 - 16
• Receiver: Opto-isolated RS-485
• Data I/O: locking 3-pin XLR female;
pin 1 shield, pin 2 cold (-), pin 3 hot
(+) socket
Maximum power and current
Option
200 V, 50 Hz
230 V, 50 Hz
245 V, 50 Hz
208 V, 60 Hz
227 V, 60 Hz
Watts
780
780
780
730
740
Amps
4.4
4.1
3.7
4.0
3.8
Design standards
• EU EMC: EN 50 081-1, EN 50 082-1
• EU safety: EN 60598-1, EN 60598-217
• Canadian safety: CSA C22.2 No.166*
• US safety: ANSI/UL 1573*
*MAC 500 US only
Electromechanical effects
• Color wheel 1: 9 replaceable filters
+ open, split
• Color wheel 2: 9 filters + open, split
• Static-gobo wheel: 9 replaceable
gobos + open
• Rotating-gobo wheel: 5 replaceable
gobos + open
• Gobo rotation: indexible variable
speed and direction
• Dimmer/Shutter: variable flash up to
23 Hz 0 - 100%
• Rotating 3-facet prism: in/out
variable speed and direction
• Focus: 2 m (6.5 ft.) - infinity
• Iris: 0 - 85% closed
• Pan: 32,768, 440°
• Tilt: 45,567, 306°
Construction
• Housing: steel and aluminum with
molded plastic covers
• Colors: black or white
• Metal finish: electrostatic powder
coating
• Protection factor: IP 20, IP 44 with
Outdoor Protection Dome
Installation
• Mounting points: 8 pairs of 1/4-turn
locks, offset 45°
• Orientation: any
• Omega bracket, MAC 500/600,
1/4-turn: 91602000
• Minimum installation distance,
center-to-center: 490 mm (19.3 in)
• Minimum distance to combustible
materials: 1 m (39 in)
• Minimum distance to illuminated
surfaces: 1 m (39 in)
Included items
• 2 x Omega bracket, MAC 500/600,
1/4-turn: 91602001
• Extra gobos, MAC 500: 56600012
• XLR cable, 5 m, black, 3-pin: 11820008
• User manual:35000016
Accessories
• MP-2 Uploader: 90758420
• Outdoor Protection Dome: 90525010
• Flight case for 2 x MAC 500/600:
91510002
• 23.5° lens kit for bayonet-mount
system: 91610015
• 23.5° lens kit for screw-mount
system: 91610009
• Focus lens (bayonet mount) retrieval
tool: 50521600
• Frost filter for MAC 500/RS 918,
assembled: 91611003
• Safety cable for head shell: 50300502
• G-clamp: 91602003
• Half-coupler clamp: 91602005
• The Martin King Dome
Specification
General
The luminaire is an automated yokemounted profile spotlight that employs
a 575 Watt discharge lamp as the light
source.
Mechanical effects
The luminaire has two color wheels,
each with nine positions for dichroic
glass color filters and an open position.
The filters on one of the wheels are
replaceable. The wheels overlap to
provide 67 possible full-color combinations. The wheels rotate continuously
clockwise and counterclockwise and
are positionable between filters.
The luminaire has one wheel with nine
replaceable static positions and one
wheel with five replaceable rotating
positions for user-selectable gobos.
The rotating positions turn continuously clockwise and counterclockwise at
variable speed and are indexible to 256
positions. The gobo wheels overlap to
provide combined pattern effects, and
the luminaire is capable of focusing
either gobo wheel at a distance of 2
meters (6.5 ft.) to infinity.
The luminaire has an iris that reduces
the beam width 85 percent, and it has
a three-facet prism that rotates clockwise and counterclockwise at variable
speed. The luminaire is prepared for an
optional frost filter that may be installed in lieu of the prism.
The luminaire has a mechanical dimmer
system to vary the intensity of the light
output from 0 to 100 percent in 256
steps. The dimmer is capable of generating stroboscopic effects at speeds of
up to 23 flashes per second.
The yoke pans 440° and the head tilts
306°.
Control
The luminaire responds to command
signals conforming to either the USITT
DMX512 (1990) standard or the Martin
RS485 standard. All user-selected software settings are adjustable via an
onboard control panel with LED display
or via data cabling in conjunction with
a remote control unit. The luminaire
has two locking 3-pole XLR connectors
for serial data transfer.
Performance
When fitted with a new MSR 575/2
discharge lamp, the luminaire emits a
total luminous flux of 9000 lumens in a
focused beam 17° wide.
Housing
The luminaire is constructed of sheet
steel and aluminum alloy. The exterior
finish is an electrostatically applied
powder coating. Non-structural covers
are constructed of molded plastic. The
exterior color can be black or white.
Installation
The luminaire operates in any orientation.It is supplied with two brackets to
which mounting clamps may be bolted.
These brackets are attached to the
base with quarter-turn fasteners such
that the luminaire may be installed at
any increment of 45° in a plane parallel
to the structure. When installed above
floor level, a secondary attachment is
fastened to a reinforced clamping point
in the luminaire's base.
Electrical
The luminaire operates on 50 Hz supplies at 200, 230, and 245 volts; and on
60 Hz supplies at 208 and 227 volts, +/five percent. It is fitted with a 3 meter
(9.8 ft.) length of three conductor 1.5
sq. mm (16 AWG) electrical cable for
connection to AC power. The luminaire
must be electrically grounded.
The luminaire conforms with CE safety
standards EN 60598-1 and EN 60598-217, and with CE electromagnetic compatibility standards EN 50 081-1 and
EN 50 082-1. Units intended for use in
North America are cETL certified for
compliance with CSA standard C22.2
No. 166, and ETL certified for compliance with ANSI/UL standard 1573.
Environmental
The luminaire must be located in a dry,
well ventilated area in which the ambient temperature does not exceed 40°
C (104° F). Where installed outdoors,
the luminaire should be supplied with a
protective housing with an IP rating of44.
Physical
Size (head at maximum tilt): 356 x 481
x 673 mm (14.0 x 18.9 x 26.5 in)
Weight: 32.8 kg (72.2 lbs)
For a MAC 300 specification quote, see the Service
and Support page on the Martin website: www.martin.dk
Martin Professional A/S • Olof Palmes Allé 18 • 8200 Aarhus N • Denmark • Phone: +45 87 40 00 00 • Fax: +45 87 40 00 10 • Internet: www.martin.dk
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising