Crestron | DM-MD64X64 | Product Specifications: DM-MD64X64

Product Specifications: DM-MD64X64
DM-MD64X64
64x64 DigitalMedia™ Switcher
>> Provides lossless HD AV signal routing over twisted pair copper
wire or fiber
>> Integrates video, audio, networking, and control over one wire
or fiber strand
>> Modular design configurable in blades of 8 inputs or outputs
>> Enables full matrix switching scalable from 8x8 to 64x64
>> Handles HDMI® with Deep Color, 3D, 4K, and high-bitrate 7.1
encoded audio [1,3]
>> HDBaseT® Certified — Enables direct connection to other
HDBaseT certified equipment [1]
>> Supports up to 64 DM 8G® transmitters and 64 DM 8G receivers
>> Distributes Full HD 1080p, Ultra HD, and 4K signals over CAT type
twisted pair cable at distances up to 330 ft (100 m) via DM 8G+™
and HDBaseT [1,4,7]
>> Distributes 1080p and WUXGA signals over multimode fiber at
distances up to 1000 ft (300 m) via DM 8G® Fiber [5,7]
>> Distributes 1080p and WUXGA signals over single-mode fiber at
distances up to 7.5 miles (12 km) via DM 8G SM Fiber [6,7]
>> QuickSwitch HD® technology manages HDCP keys for fast,
reliable switching
>> Auto-Locking™ technology achieves rapid switching between
disparate sources
>> 15” color touch screen enables simplified front panel setup,
operation, video preview, and troubleshooting
>> Built-in Web server enables full operation from any
networked computer
>> Allows system monitoring through front panel, Web browser,
control system, or Fusion RV®
>> Allows independent scaling for every display device through
select DM receivers [8]
>> Enables device control via CEC
>> Distributes USB HID mouse and keyboard signals between
transmitters and receivers [9]
>> Expanded USB routing capabilities available using USB over
Ethernet Extenders [9]
>> Includes integrated Ethernet switch with Gigabit LAN port
>> Private Network Mode — requires just one IP address for the
complete DM system
>> Features hot-swappable redundant power supplies and fan tray
with advanced status monitoring
>> Hot-swappable I/O blades afford fast restoration of service with
minimal disruption
>> 14-space 19-inch rack-mountable
Crestron® DM® Switchers provide the foundation for a complete
DigitalMedia™ system, delivering an advanced 4K ultra high-definition
AV signal routing solution that’s extremely flexible and installer-friendly.
The DM-MD64X64 is a modular matrix switcher designed for large-scale
projects demanding ultimate reliability. It delivers ultra fast signal routing
and pure, lossless distribution of HDMI® and other signals to support
all the Blu-ray Disc® players, HDTV receivers, digital media servers,
computers, cameras, and display devices that fill any modern facility.
crestron.com
| 800.237.2041
DigitalMedia thoughtfully manages all of the disparate AV signals and
devices to deliver a transparent user experience, and to ensure an
optimum video image and audio signal at every location.
Featuring a scalable blade-based design, the DM-MD64X64 affords
maximum input and output count in a condensed 14U rack-mountable
chassis. The DM-MD64X64 is field-configurable to handle up to 64 inputs
and 64 outputs, supporting HDMI, HDBaseT®, analog audio, and all types
of DigitalMedia 8G™ signals.[1] Through a selection of hot-swappable input
and output blades, and a variety of DM 8G® transmitters and receivers, the
DM-MD64X64 allows extensive connectivity throughout a commercial or
residential facility, supporting a wide range of signal types all through
one switcher!
Integrated Ethernet networking and USB distribution provide a
complete connectivity solution combined with built-in Crestron control[2]
for managing the displays and other room devices without necessitating
any additional wiring. Hot-swappable redundant power supplies and
advanced system-wide monitoring ensure continuous, dependable
operation for mission-critical applications. User-friendly operation, setup,
and troubleshooting tools are provided through the front panel touch
screen or Web browser interface to make setting up a complete multiroom
4K video distribution system easy.
DM-MD64X64 64x64 DigitalMedia™ Switcher
4K Ultra HD
Crestron DigitalMedia continues to advance the standard for digital
AV signal distribution, delivering the world’s first end-to-end 4K system
solution. From day one, the DM-MD64X64 was designed to meet the
extreme bandwidth requirements for handling 4K and Ultra HD video
signals. Support for 4K video also ensures support for the latest
generation of computers and monitors with native resolutions beyond
1080p and WUXGA.[3]
DigitalMedia 8G™
As the leader in HDMI and control system technologies, Crestron developed
DigitalMedia (DM) to deliver the first complete HD AV distribution system
to take HDMI to a higher level. DigitalMedia allows virtually any mix of
HDMI and other AV sources to be distributed throughout a room, building,
or campus. The latest generation of DM is called DigitalMedia 8G (DM 8G).
Engineered for ultra high-bandwidth and ultimate scalability, DM 8G
provides a true one-wire lossless transport for moving high-definition
video, audio, Ethernet, and control signals over a choice of twisted pair or
fiber optic cable.
DM 8G handles uncompressed Full HD 1080p, Ultra HD, 2K, and 4K[3]
video signals with support for 3D, Deep Color, and HDCP. Audio capabilities
include support for high-bitrate 7.1 audio formats like Dolby® TrueHD and
DTS-HD Master Audio™ as well as uncompressed linear PCM. All signals
are transported over one CAT type twisted pair cable or one strand of
multimode or single-mode fiber. DM 8G enables wire distances up to
330 feet (100 m) via DM 8G+™ (DM 8G over twisted pair copper wire)[1,4,7],
1000 feet (300 m) via DM 8G Fiber (DM 8G over multimode fiber)[5,7], or
7.5 miles (12 km) via DM 8G SM Fiber (DM 8G over single-mode fiber)[6,7].
HDBaseT® Certified
Crestron DigitalMedia 8G+ technology is designed using HDBaseT Alliance
specifications, ensuring interoperability with other HDBaseT certified
products. Via DM 8G+, the DM-MD64X64 can be connected directly to an
HDBaseT compliant device without requiring a DM transmitter or receiver.
Modular Architecture
The DM-MD64X64 features a modular architecture with 8 input blade
slots and 8 output blade slots. Each blade slot on the DM-MD64X64 is
field-installable, allowing for easy and flexible system configuration with
the ability to make changes to the system as needs change. The input and
output blades are hot-swappable to facilitate servicing without shutting
down the whole switcher. I/O blades are offered to support the choice of
HDMI, HDBaseT, analog audio, DM 8G+, DM 8G Fiber, and DM 8G SingleMode Fiber. Each blade provides eight inputs or outputs of any one type.[1]
QuickSwitch HD®
Handling high-definition digital media means handling HDCP (Highbandwidth Digital Content Protection), the encryption scheme that content
providers use to protect their DVDs, Blu-ray discs, and broadcast signals
against unauthorized copying. Viewing HDCP encrypted content requires a
source device to “authenticate” each display and signal processor in the
system and issue it a “key” before the content can be viewed. Ordinarily
this causes a complete loss of signal for up to 15 seconds each time a new
source or display is selected anywhere in the system. To make matters
worse, every source device has a limited number of keys available, so
crestron.com
| 800.237.2041
DM-MD64X64 – Rear view with I/O blades installed
connect too many displays and the source will simply stop outputting a
signal without warning.
Not to worry — Crestron QuickSwitch HD manages the keys for every
HDCP-compliant device in the system, maintaining continuous
authentication for each device to ensure fast, reliable routing of any source
to any number of display devices.
Auto-Locking™ Technology
Crestron Auto-Locking Technology enables super fast signal switching by
instantaneously configuring every device in the signal path as soon as the
signal hits the first device. Whether switching between sources or TV
channels, Auto-Locking significantly reduces the time it takes each device
to sense the new signal and configure itself to handle the changes,
virtually eliminating any noticeable gap while switching.
EDID Format Management
With all of today’s varied AV sources comes a multitude of confusing video
and audio formats to keep track of, and chances are not every device in
your system supports all of the same formats. Such conflicts can wreak
havoc any time you route one source to more than one display or audio
DM-MD64X64 64x64 DigitalMedia™ Switcher
component. The media source feeding your 1080p or Ultra HD projector
in the theater may restrict itself to a lower resolution, or even shut off
completely, if someone decides to view the same signal on a smaller TV
in another room. And, instead of enjoying your theater’s incredible 7.1
surround sound, you may find yourself limited to 5.1 or even plain
old stereo.
DigitalMedia eliminates such conflicts by managing the EDID
(Extended Display Identification Data) that modern digital devices use to
communicate their capabilities. Through the DM-MD64X64, the format
and resolution capabilities of each device can be assessed, allowing the
installer to configure EDID appropriately for the most desirable and
predictable behavior.
A Scaler for Every Display
High-performance scaling capability can be added to any DM system
using select DM receivers with built in HD and 4K scalers. By placing an
independent scaler at every display device, DigitalMedia truly delivers
the most flexible and user-friendly solution for routing multiple disparate
sources to many different display devices. This “Distributed Scaler
Approach” ensures an optimal image on every screen no matter what
sources are selected. Distributed scaling allows a high-res computer
source to be viewed on any display in the building. It also allows an HD,
Ultra HD, or 3D video source to be viewed simultaneously on the 4K display
in your theater and on lower-resolution 2D displays throughout the house.
Built-in Ethernet Switch
In addition to transporting digital video and audio, DigitalMedia can also
extend 10/100 Ethernet out to each display and source device via select
DM receivers and transmitters, providing high-speed connectivity for
any room device that requires a LAN connection. Ethernet is also utilized
internally by the Crestron control bus to manage all of the DM devices in
the system and provide display control in each room.
Private Network Mode
To streamline its implementation on a corporate or university LAN, the
DM-MD64X64 employs Private Network Mode to provide a single-point
connection for the complete system. Using Private Network Mode, the
DM-MD64X64 requires just one IP address for the complete DM network
including all connected DM receivers and transmitters.
USB Signal Routing
Along with video, audio, and Ethernet, DigitalMedia also provides for the
routing of USB HID (Human Interface Device) signals, allowing a USB HID
compliant keyboard and/or mouse at one location to control a computer
or media server in another location, whether just across the room or in
another building. USB HID connectivity is provided through select DM
receivers and transmitters.
Crestron also offers USB extenders to enable the routing of virtually any
type of USB peripheral to any host device, all managed through the
DigitalMedia system. Connect a USB over Ethernet Extender host module
(USB-EXT-DM-LOCAL[8]) to each computer, media server, game system,
annotator, and any other host that you want to control or communicate
with. Then, install a device module (USB-EXT-DM-REMOTE[8]) at every
display location to connect keyboards, mice, game controllers, whiteboards, flash drives, cameras, and mobile devices. Every module
crestron.com
| 800.237.2041
communicates with the DM switcher over the local Ethernet network or
via a direct connection to the LAN port of a DM transmitter or receiver.
CEC Embedded Device Control
The primary objective of every Crestron system is to enable precisely the
control desired for a seamless user experience. DigitalMedia provides an
alternative to conventional IR and RS-232 device control by harnessing the
CEC (Consumer Electronics Control) signal embedded in HDMI. Through its
connection to the control system, the DM-MD64X64 provides a gateway
for controlling many devices right through their HDMI connections,
potentially eliminating the need for any dedicated control wires or IR
emitters. Through proper CEC signal management, DigitalMedia allows
you to take control of each device as you like.
Touch Screen Front Panel
Simplified setup and operation of the DM-MD64X64 is provided through a
large 15” color touch screen. Through its user-friendly graphical interface,
the touch screen enables the routing of AV signals with the ability to view
resolution and format information for every input and output signal, and
even preview a live video image of any input. Configuration and
diagnostics capabilities include monitoring of the status for each i/o blade,
fan tray and power supply, configuration of Ethernet settings, and
updating of the firmware for all connected devices.
Web Browser Control
The DM-MD64X64 also includes a built-in Web server, enabling full
operation and monitoring through any networked computer with a Web
browser. Password protection prevents unauthorized access to this feature.
Hot-Swappable Redundant Power Supplies
The DM-MD64X64 delivers enhanced reliability for mission critical
applications, employing hot-swappable redundant power supplies to
ensure continuous operation throughout the life of the system. Each of
its two onboard power supplies has a demonstrated MTBF (Mean Time
Between Failures) of over a half million hours, and in the unlikely event
of an individual power supply fault, the switcher will continue to operate
unhindered on only one power supply. Clear indication of such a fault is
provided on the unit’s front panel, and the power supplies can even be
remotely monitored via a control system touch screen, mobile device, or
Crestron Fusion RV® Remote Asset Management Software. A modular hotswappable plug-in design allows either supply to be replaced in seconds
without ever shutting down the switcher or removing it from the
equipment rack.
Please refer to the DigitalMedia Resources Webpage at
http://www.crestron.com/dmresources/ for additional design tools and
reference documents.
DM-MD64X64 64x64 DigitalMedia™ Switcher
SPECIFICATIONS
Audio
Maximum DM 8G® Cable Lengths
Switcher: 64x64 digital multi-channel audio-follow-video matrix
switching, monitor output;
Note: Audio breakaway is not supported
Input Signal Types: Configurable via modular plug-in blades supporting
HDMI, DisplayPort Multimode[10], HDBaseT[1], analog (stereo 2-channel),
DM 8G+[1], DM 8G Fiber, and DM 8G SM Fiber
Output Signal Types: Configurable via modular plug-in blades supporting
HDMI[1], HDBaseT, analog (stereo 2-channel)[1], DM 8G+, DM 8G Fiber, and
DM 8G SM Fiber
Formats: Dolby Digital®, Dolby Digital EX, Dolby Digital Plus,
Dolby® TrueHD, DTS®, DTS-ES, DTS 96/24, DTS-HD High Res,
DTS-HD Master Audio™, up to 8ch PCM
Cable Type: DM-CBL-ULTRA
DM® Ultra
Cable
Resolution:
DM-CBL-8G
DM 8G®
Cable
3rd-Party
CAT5e
(or better)
UTP or STP
1080p60 Full HD
1920x1200 WUXGA
330 ft (100 m)
via any DM 8G+ cards
1600x1200 UXGA
2048x1080 2K DCI
@24Hz
2048x1080 2K DCI
@60Hz
2560x1440 WQHD
2560x1600 WQXGA
3840x2160 Ultra HD
330 ft
(100 m)
via “4K”
DM 8G+
cards
230 ft
(70 m)
via “4K”
DM 8G+
cards
165 ft
(50 m)
via “4K”
DM 8G+
cards
4096x2160 4K DCI
Cable Type:
Resolution:
CRESFIBER8G
CresFiber® 8G
Multimode Fiber
3rd-Party
OM3
Multimode Fiber
1080p60 Full HD
1920x1200 WUXGA
1600x1200 UXGA
2048x1080 2K DCI
@24Hz
Cable Type:
Resolution:
1000 ft (300 m)
via DM 8G Fiber cards
CRESFIBER8G-SM
CresFiber 8G
Single-Mode Fiber
500 ft (150 m)
via DM 8G Fiber cards
3rd-Party
G.652.D (or better)
Single-Mode Fiber
1080p60 Full HD
Ethernet: 10/100/1000 Mbps, auto-switching, auto-negotiating,
auto-discovery, full/half duplex, DHCP, Private Network Mode, Web server
for remote configuration and operation
USB: USB signal routing via select transmitters, receivers, and
extenders[9]; USB service port for computer console
DigitalMedia: DM 8G+ [1], DM 8G Fiber, DM 8G SM Fiber, HDCP, EDID, CEC,
PoDM, Ethernet
HDBaseT: HDCP, EDID, PoH, Ethernet
HDMI: HDCP, EDID, CEC
NOTE: Supports management of HDCP and EDID; supports management of
CEC between HDMI devices and a control system
Blade Slots
INPUT 1 – 8: (8) DM switcher input blade slots, hot-swappable;
Each slot accepts (1) DMB-I series input blade
OUTPUT 1 – 8: (8) DM switcher output blade slots, hot-swappable;
Each slot accepts (1) DMB-O series output blade
CPU: Accepts (1) DMB-CPU-64 CPU blade (included)
1920x1200 WUXGA
1600x1200 UXGA
2048x1080 2K DCI
@24Hz
7.5 miles (12 km)
via DM 8G SM Fiber cards
Connectors – CPU
LAN: (1) 8-wire RJ45 female;
10Base-T/100Base-TX/1000Base-T Ethernet port
SERVICE: (1) 8-wire RJ45 female;
Computer console part
Video
Switcher: 64x64 digital matrix, modular input/output blades, Crestron
QuickSwitch HD®
Input Signal Types: Configurable via modular plug-in blades supporting
HDMI®, DisplayPort Multimode[10], DVI[10], HDBaseT®[1], DM 8G+™[1],
DM 8G Fiber, and DM 8G SM Fiber
Output Signal Types: Configurable via modular plug-in blades supporting
HDMI[1], DVI[10], HDBaseT, DM 8G+, DM 8G Fiber, and DM 8G SM Fiber
Formats: HDMI, HDBaseT, or DM 8G w/Deep Color, 3D, & 4K; DVI; HDCP
content protection support
Input Resolutions: Refer to the specifications for each input blade
Output Resolutions: Refer to the specifications for each output blade
crestron.com
Communications
| 800.237.2041
MEMORY: (1) SD memory card slot; accepts one SD™ or SDHC™ card up
to 32 GB for memory expansion (2 GB SD card included);
For save/load of configuration and EDID settings, and firmware update
AUDIO OUT: (1) 5-pin 3.5mm detachable terminal block;
Balanced/unbalanced stereo line-level output;
Output Impedance: 200 Ohms balanced, 100 Ohms unbalanced;
Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced
DM-MD64X64 64x64 DigitalMedia™ Switcher
Connectors – Main Chassis
Environmental
100-127V~50/60Hz 16A, 200-240V~50/60Hz 8A: (2) IEC 60320 C-20
main power inlets; mate with removable power cords, included
Temperature: 32° to 104°F (0° to 40°C)
Humidity: 10% to 90% RH (non-condensing)
Heat Dissipation: 5460 BTU/hr maximum, 3000 BTU/hr typical, with all
blade slots occupied
G: (1) 6-32 screw, chassis ground lug
COMPUTER (front): (1) USB Type B female;
USB computer console port (6 ft cable included)
Touch Screen
15 inch (381 mm) diagonal TFT active matrix color LCD, 15:9 WXGA,
1280 x 768 pixels, resistive touch membrane, amplified speakers;
Provides signal routing, video input preview, video and audio signal
information, system diagnostics, setup and configuration
Controls & Indicators
Touch Screen Hard Key: (1) pushbutton, not used
POWER SUPPLIES, 1 – 2: (2) green LEDs, indicate when each
corresponding supply is functioning
POWER SUPPLIES, FAULT: (1) red flashing LED, indicates a fault with
either supply
HW-R: (1) recessed miniature pushbutton for hardware reset, reboots
the switcher
ACT (rear, CPU): (1) green LED, indicates CPU activity
MSG (rear, CPU): (1) red LED, indicates CPU has generated an
error message
CPU RESET (rear, CPU): (1) recessed miniature pushbutton, reboots the
CPU and front panel
LAN (rear, CPU): (2) LEDs, green LED indicates Ethernet link status,
amber LED indicates Ethernet activity
SERVICE (rear, CPU): (2) LEDs, green LED indicates Ethernet link status,
amber LED indicates Ethernet activity
OK (rear, power supplies): (2) green LEDs, indicate when each
corresponding supply is powered and functioning
! (rear, power supplies): (2) amber LEDs, each indicates a fault with the
corresponding supply
Power Requirements
Main Power: 16 Amps @ 100-127 Volts AC or 8 Amps @ 200-240 Volts
AC, 50/60 Hz;
Requires (2) 20 Amp @ 100-127V, or (2) 10 Amp @ 200-240V, AC circuits
Available PoDM/PoH Power: Refer to the specifications for each DM 8G+
input and output blade[1]
Redundant Power Supplies
Quantity/Type: (2) high efficiency (>90%), hot-swappable, variable speed
fan cooled, Crestron model DM-MDA-64-PWS (included)
Demonstrated MTBF: >500,000 hours per power supply
Redundancy: Complete unit continues to operate at full capacity on one or
more functioning power supplies
crestron.com
| 800.237.2041
Enclosure
Chassis: Metal with black finish, integrated rack ears, vented sides and
rear, fan-cooled
Faceplate: Metal, black finish with polycarbonate label overlay, plastic
touch screen bezel
Mounting: 14U 19-inch rack-mountable (rack ears built in)
Dimensions
Height: 24.44 in (621 mm)
Width: 19.00 in (483 mm)
Depth: 16.26 in (413 mm) without I/O blades
Weight
49.0 lb (22.3 kg) without I/O blades
DM-MD64X64 64x64 DigitalMedia™ Switcher
MODELS & ACCESSORIES
Notes:
Available Models
1. Onboard HDMI output, analog audio output, HDBaseT input, and DM 8G+ input are future
features that will be enabled through future output and input blades.
2. Crestron control via the DM network requires a Crestron control system, sold separately.
3. 4K and Ultra HD are currently supported via HDMI inputs and DM 8G+ (HDBaseT compatible)
outputs. Additional 4K I/O options are coming soon.
4. The maximum cable length for DigitalMedia 8G+ (DM 8G+) or HDBaseT is dependent upon
the type of cable and the resolution of the video signal. Refer to the “Maximum DM 8G Cable
Lengths” table for a detailed overview. Crestron legacy cable models DM-CBL DigitalMedia
Cable and DM-CBL-D DigitalMedia D Cable support the same resolutions and cable lengths as
CAT5e. Shielded cable and connectors are recommended to safeguard against unpredictable
environmental electrical noise which may impact performance at resolutions above 1080p. DM
8G+ is compatible with HDBaseT Alliance specifications for connecting to HDBaseT compliant
equipment.
5. The maximum cable length for DigitalMedia 8G Fiber (DM 8G Fiber) is 1000 ft (300 m) using
CRESFIBER8G multimode fiber optic cable, or 500 ft (150 m) using CRESFIBER (legacy),
CRESFIBER-SINGLE-SC, or third-party OM3 simplex multimode fiber optic cable.
6. The maximum cable length for DigitalMedia 8G Single-Mode Fiber (DM 8G SM Fiber) is
7.5 miles (12 km) using CRESFIBER8G-SM or third-party G.652.D (or better) single-mode fiber
optic cable.
7. Refer to the Crestron DigitalMedia Design Guide, Doc. #4546 for complete system design
guidelines. All wire and cables are sold separately.
8. Item(s) sold separately.
9. Manages the routing of USB HID signals between peripheral DM devices that are equipped
with USB HID ports. Also programmable to manage the routing of USB signals between
Crestron USB over Ethernet Extender modules (USB-EXT-DM, sold separately).
10. DVI and DisplayPort Multimode connectivity is supported via an HDMI input port using a
suitable adapter or interface cable. DVI output is supported via an HDMI output port using a
suitable adapter or interface cable. CBL-HD-DVI interface cables are available separately.
DM-MD64X64: 64x64 DigitalMedia™ Switcher
Included Accessories
DMB-CPU-64: CPU Blade for DM-MD64X64 (Qty. 1 Included)
DM-MDA-64-FANTRAY: Fan Tray for DM-MD64X64 (Qty. 1 Included)
DM-MDA-64-PWS: Power Supply for DM-MD64X64 (Qty. 2 Included)
Available Accessories
DMB Series: Input and Output Blades for DM® Switchers
DM-CBL-ULTRA-NP: DigitalMedia™ Ultra Cable, Non-Plenum Type CMR
DM-CBL-ULTRA-P: DigitalMedia™ Ultra Cable, Plenum Type CMP
DM-CBL-ULTRA-LSZH: DigitalMedia™ Ultra Cable, Low Smoke Zero
Halogen
DM-CONN: DigitalMedia™ Cable Connector
DM-CBL-8G-NP: DigitalMedia 8G™ Cable, non-plenum
DM-CBL-8G-P: DigitalMedia 8G™ Cable, plenum
DM-8G-CONN: DigitalMedia 8G™ Cable Connector
DM-8G-CRIMP: Crimping Tool for DM-8G-CONN
DM-8G-CONN-WG: DigitalMedia 8G™ Cable Connector with Wire Guide
DM-8G-CRIMP-WG: Crimping Tool for DM-8G-CONN-WG
CRESFIBER8G: CresFiber® 8G Multimode Fiber Optic Cable
CRESFIBER-CONN-SC50UM-12: CresFiber® Fiber Optic Cable Connector
CRESFIBER8G-SM: CresFiber® 8G Single-Mode Fiber Optic Cable
CRESFIBER8G-SM-CONN-LC-12: CresFiber® 8G Single-Mode Fiber Optic
Cable Connectors
CRESFIBER-TK: CresFiber® Termination Kit
CRESFIBER-SINGLE-SC: CresFiber® Simplex Fiber Optic Cable Assembly,
50/125, SC
CRESFIBER-SINGLE-SC-ARMORED: CresFiber® ARMORED Simplex Fiber
Optic Cable Assembly, 50/125, SC
CRESFIBER-SINGLE-SC-CLEAR: CresFiber® CLEAR Simplex Fiber Optic
Cable Assembly, 50/125, SC
USB-EXT-DM-REMOTE: USB over Ethernet Extender with Routing, 4-Port
Device Module
USB-EXT-DM-LOCAL: USB over Ethernet Extender with Routing, Host
Module
AMP-2210S: 2x210W Commercial Power Amplifier, 4/8Ω
AIR SR6: AIR® 6.5” 2-Way Surface Mount Speakers
crestron.com
| 800.237.2041
This product may be purchased from an authorized Crestron dealer. To find a dealer, pleasecontact
the Crestron sales representative for your area. A list of sales representatives is available online at
www.crestron.com/salesreps or by calling 800-237-2041.
The specific patents that cover Crestron products are listed online at: patents.crestron.com.
Crestron, the Crestron logo, AIR, Auto-Locking, CresFiber, DigitalMedia, DigitalMedia 8G,
DigitalMedia 8G+, DM, DM 8G, DM 8G+, Fusion RV, and QuickSwitch HD are either trademarks
or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries.
Blu-ray Disc is either a trademark or registered trademark of the Blu-ray Disc Association in the
United States and/or other countries. Dolby and Dolby Digital are either trademarks or registered
trademarks of Dolby Laboratories in the United States and/or other countries. DTS, DTS-HD
Master Audio, and the DTS logo are either trademarks or registered trademarks of DTS, Inc. in
the United States and/or other countries. HDBaseT and the HDBaseT Alliance logo are either
trademarks or registered trademarks of the HDBaseT Alliance in the United States and/or other
countries. HDMI and the HDMI Logo are either trademarks or registered trademarks of HDMI
Licensing LLC in the United States and/or other countries. SD and SDHC are either a trademarks
or registered trademarks of SD-3C, LLC in the United States and/or other countries. Other
trademarks, registered trademarks, and trade names may be used in this document to refer
to either the entities claiming the marks and names or their products. Crestron disclaims any
proprietary interest in the marks and names of others. Crestron is not responsible for errors in
typography or photography. Specifications are subject to change without notice.
©2014 Crestron Electronics, Inc.
DM-MD64X64 64x64 DigitalMedia™ Switcher
|
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647
Tel: 800.237.2041 / 201.767.3400
www.crestron.com
| Fax: 201.767.1903
All brand names, product names and trademarks are the property of their respective owners.
©2014 Crestron Electronics, Inc.
Specifications subject to change without notice. Revised 11/25/14
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising