Yamaha | CDX-450 | Owner's Manual | Yamaha CDX-450 Owner's manual

Yamaha CDX-450 Owner's manual
 CONTENTS
Safety Instructions ere
Caution: eee,
Warning... rar car cea secs ee cernes enr
Connections ere esse
Identification of Components...
Loading the Disc/Disc Play .
Random-sequence Play es
Repeat Play ............
Program Play ............22.2 es
Index Search see sean s een
Track Programming for Recording to Tape
Notes about the Remote Control Transmitte
Notes about Handling Compact Discs .......
Troubleshooting serein
Specifications ............
OWNER'S MANUAL
IMPORTANT!
Please make a note of the serial number of
0 this unit in the space indicated below.
2 Model:
нее > Serial No.:
… 5 The serial number is inscribed on the rear
… 6 ofthe unit.
… 9 Keep this Owner's Manual in a safe place
… 9 for future reference.
… 10
… 41
… 12 WARNING |
… 15 To reduce the risk of fire or electric shock,
15 do not expose this appliance to rain or
ve a moisture.
TION: TO REDUCE THE RISK OF =~ 7
a. ELECTRIC SHOCK, DO. NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
„обес PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
e Explanation of Graphical Symbols
The lightning flash with arrowhead
symbol, within an equilateral triangle, is
intended to alert you 10 the presence
of uninsulated “dangerous voltage”
within the product's enclosure that may
be of sufficient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended to alert
you to the presence of important
operating and maintenance (servicing)
instructions in the literature
accompanying the appliance.
1 Read Instructions — All the safety and operating
instructions should be read before the appliance is
operated. |
2 Retain Instructions — The safety and operating
instructions should be retained for future reference.
3 Heed Warnings ~ All warnings on the appliance and
in the operating instructions should be adhered to.
4 Follow Instructions — All operating and other
instructions should be followed.
5 Water and Moisture — The appliance should not be
used near water — for example, near a bathtub,
washbowl, kitchen sink, laundry tub, in a wet
basement, or near a swimming pool, etc.
6 Carts and Stands — The appliance should be used
only with a cart or stand that is recommended by the
manufacturer.
8A An appliance and cart
| combination should be moved
with care. Quick stops, excessive
force, and uneven surfaces may
cause the appliance and cart
combination to overturn.
7 Wall or Ceiling Mounting — The appliance should be
mounted to a wall or ceiling only as recommended by
the manufacturer.
8 Ventilation — The appliance should be situated so that
its location or position does not interfere with its
proper ventilation. For example, the appliance should
not be situated on a bed, sofa, rug, or similar surface,
that may block the ventilation openings; or placed in
a built-in installation, such as a bookcase or cabinet
that may impede the flow of air through the ventilation
openings.
9 Heat — The appliance should be situated away from
heat sources such as radiators, stoves, or other
appliances that produce heat.
10
11
12
13
14
17
18
Power Sources — The appliance should be connected
to a power supply only of the type described in the
operating instructions or as marked on the appliance.
Power-Cord Protection — Power-supply cords should
be routed so that they are not likely to be walked on
or pinched by items placed upon or against them,
paying particular attention to cords at plugs,
convenience receptacles, and the point where they
exit from the appliance.
Cleaning — The appliance should be cleaned only as
recommended by the manufacturer.
Nonuse Periods — The power cord of the appliance
should be unplugged from the outlet when left unused
for a long period of time.
Object and Liquid Entry — Care should be taken so
that objects do not fall into and liquids are not spilled
into the inside of the appliance. |
Damage Requiring Service — The appliance should be
serviced by qualified service personnel when:
The power-supply cord or the plug has been
damaged; or
Objects have fallen, or liquid has been spilled into the
appliance; or
The appliance has been exposed to rain; or
The appliance does not appear to operate normally or
exhibits a marked change in performance; or
The appliance has been dropped, or the cabinet
damaged. |
Servicing — The user should not attempt to service the
appliance beyond those means described in the
operating instructions. all other servicing should be
referred to qualified service personnel.
Power Lines — An outdoor antenna should be located
away from power lines.
Grounding or Polarization — The precautions that
should be taken so that the grounding or polarization
is not defeated.
À To ensure the finest performance, please read this
manual carefully. Keep it in a safe place for future
reference.
2 Install your unit in a cool, dry, clean place — away
from windows, heat sources, and too much vibration,
dust, moisture or cold. Avoid sources of hum
(transformers, motors). To prevent fire or electrical
shock, do not expose to rain and water.
3 Do not operate the unit upside-down. It may overheat,
possibly causing damage.
4 Never open the cabinet. If a foreign object drops into
the set, contact your dealer.
Do not place records or other objects on top of the
‘unit; this will block the ventilation holes, cause the
internal temperature to rise and may result in a failure.
Do not use force on switches, knobs or cords. When
moving the set, first turn the unit off. Then gently -
disconnect the power plug and the cords connecting
to other equipment. Never pull the cord itself.
Do not attempt to clean the unit with chemical
solvents; this might damage the finish. Use a clean,
dry cloth.
Be sure to read the “Troubleshooting” section on
common operating errors before concluding that your
unit is faulty.
WARNING
DANGER
defeated.
Avoid direct exposure to beam.
Invisible laser radiation when open and interlock failed or
CAUTION
Use of controls or adjustments or performance of
procedures other than those specified herein may result
in hazardous radiation exposure.
As the laser beam used in this compact disc player is
harmful to the eyes, do not attempt to disassemble the
cabinet. Refer servicing to qualified personel only.
To avoid electrical shock, do not open the unit. Refer
servicing to qualified personnel only.
DANGER: The use of optical instrument with this product
will increase eye hazard.
FCC INFORMATION (U.S.A)
1. IMPORTANT NOTICE : DO NOT MODIFY THIS
UNIT!
This product, when installed as indicated in the
instructions contained in this manual, meets FCC
requirements. Modifications not expressly approved
by Yamaha may void your authority, granted by the
FCC, to use the product. |
2. IMPORTANT : When connecting this product to
accessories and/or another product use only high
quality shielded cables. Cable/s supplied with this
product MUST be used. Follow all installation
instructions. Failure to follow instructions could void
your FCC authorization to use this product in the
USA.
3. NOTE : This product has been tested and found to
comply with the requirements listed in FCC
Regulations, Part 15 for Class “B” digital devices.
Compliance with these requirements provides a
reasonable level of assurance that your use of this
product in a residential environment will not result
in harmful interference with other electronic devices.
This equipment generates/uses radio frequencies
and, if not installed and used according to the
instructions found in the users manual, may cause
interference harmful to the operation of other
electronic devices.
Compliance with FCC regulations does not
guarantee that interference will not occur in all
installations. If this product is found to be the
source of interference, which can be determined by
turning the unit “OFF” and “ON”, please try to
eliminate the problem by using one of the following
measures:
Relocate either this product or the device that is
being affected by the interference.
Utilize power outlets that are on different branch
(circuit breaker or fuse) circuits or install AC line
filter/s.
In the case of radio or TV interference,
relocate/reorient the antenna. If the antenna lead-in
is 300 ohm ribbon lead, change the lead-in to co-
axial type cable. |
If these corrective measures do not produce
satisfactory results, please contact the local retailer
authorized to distribute this type of product. If you
can not locate the appropriate retailer, please contact
Yamaha Electronics Corp., U.S.A. 6722 Orangethorpe
Ave, Buena Park, CA 90620.
The above statements apply ONLY to those products
distributed by Yamaha Corporation of America or its
subsidiaries.
The solder used in the manufacture of this product
contains LEAD. In addition, the electrical/electronic and/or
plastic (where applicable) components may also contain
traces of chemicals found by the California Health and
Welfare Agency (and possibly other entities) to cause
cancer and/or birth defects or other reproductive harm.
DC NOT REMOVE ANY ENCLOSURE COMPONENTS! _.
There are no user serviceable parts inside. All service
should be performed by a service representative
authorized by Yamaha to perform such service.
IMPORTANT MESSAGE: Yamaha strives to produce
products that are both user safe and environmentally
“friendly”. We sincerely believe that our products meet
these goals. However, in keeping with both the spirit and
the letter of various statutes we have included the
preceding messages and others in various locations in this
manual.
e Before making any connections, switch OFF the power
to the unit and the amplifier or other component.
e Connect the “LINE OUT” terminals to the “CD” (or
“AUX”) terminals of the amplifier. If the amplifier does
not have such terminals, use the “TAPE PB” terminals.
For additional details concerning these connections, refer
to the operation instructions for the amplifier being used.
- LINE QUT
® Be sure that the connection from the left (“L”) LINE
OUT analog output terminal and from the right (“R”)
terminal are to the correct corresponding (left and right)
terminals of the amplifier or other component.
e If the placement of this unit causes noise to other
equipment, such as a tuner, use them farther away from
each other. | |
©
© |
Lee
To AC outlet
Connection cords (included)
( \ es
Amplifier
D > E] CC
9 © OO O0 OOC®
co ama I
FRONT PANEL
SEARCH button
POWER switch | i | |
Display pane STOP button
PAUSE button
Disc tray
SKIP button
Remote contro! sensor
| PLAY button
Г — | DD AU == FTP |
5 ===
a Sese 8 Bee (0
- | CT
TAPE button
PROG button
RANDOM button
OPEN/CLOSE button REPEAT button
TIME display mode-
select bution
OUTPUT LEVEL control
PHONES jack
-* The control functions on the main unit and on the
remote-control transmitter are virtually identical, with the
exceptions described below.
MODE button
Numeric buttons
INDEX button
+ bin EL
San ©
С Г J | TT
4 POWER
| 4 OPEN/CLOSE
Nl
Label side
£& OPEN/CLOSE
TS
Disc tray
Display information at disc play -
oo
+ swueLe 1-11 =
TRACK J “5 Li EILI 0000000600000
3 4 887 8 8 0 99 92
AN £
E - ñ
|
©
(D Shows the track number to be played.
Shows the time displays. (Refer to “Selecting time
displays” on page 8.)
@ Displays the numbers that correspond to the numbers
of the tracks (as high as number 20) on the disc.
After each track is piayed, its corresponding number
disappears so the number of remaining tracks (and
their numbers) can be seen at a glance.
Notes
e After closing the disc tray by pressing the
OPEN/CLOSE button, the display shows the total
number of tracks and the total recorded time of the
disc for a few seconds.
DISC [| ~ 1 vara _
TRACK | 59:36
tes"
(0000006000000
12 34687 88 1019 12
® Additionally, you can close the disc tray by pressing the
PLAY button, a numeric button on the remote-control
transmitter or the RANDOM button, or by pressing the
front edge of the disc tray gently. № the tray is closed
in these ways, play will begin automatically, however,
the display will not show the total number of tracks and
the total recorded time of the disc.
D) PAUSE
* To resume play, press the PAUSE button again or
press the PLAY button.
DIRECT PLAY
Select a desired track by using the numeric buttons on
the remote control transmitter.
0
SD
AI
|
a
The selected track
number is displayed.
Example: To select track 23
1. Press > twice.
2. Press once shortly.
* If a track number higher than the highest track number
on the disc is selected, the last track on the disc will
be played.
SKIP PLAY
e To play from the beginning of the track following the
‘one now playing |
kk SKIP DO
I
PROG STEP
e To play from the beginning of the track now piaying
kg SKIP mal
1
PROG STEP
e To play from the beginning of the track before the one
now playing SKIP
PROG STEP
(twice)
* This operation can be activated even if the unit is in the
pause or stop mode.
When you listen with headphones
Connect the headphones to the PHONES jack and adjust
the volume by using the OUTPUT LEVEL control. At that
time, note that this adjustment will also vary the signal
level output to the amplifier.
PHONES
OUTPUT LEVEL
DOWN UP
OUTPUT LEVEL
DOWN UP
A ~ Or
To advance rapidly
<<] SEARCH >>
TRACK
(press and hold)
e The sound can be heard (although slightly garbled)
during manual search in either direction. This is
convenient for locating a precise position within a
track, or for reviewing the contents quickly.
® When manual search in either direction is initiated
during the pause mode, the action is the same, but
no sound is heard.
To reverse rapidly
<<) SEARCH Pt
TRACK
(press and hold)
Selecting time displays
You can select any of the four types of time displays by pressing the TIME display mode-select button.
= _ UOTE =
5A — en e Г.
TRACK Le Lo IT 0000000033000
23485678 ¢ 109 12
DISC =} nas ==
PEA, — SINGLE , и
TRACK Г PERSA Pri
2 3 48 € 7 8 8 12 70 12
JC£0300000000
DElapsed time of the track now playing
ORemaining time of the track now playing
Total disc play time |
@Total remaining time on the disc
оС |. — PETAL — о, т Г C=
TRACK Lo onemam ZELL 020000050008
2 34 BEB 7 8 8 40 91 12
TIME
@
[DISC] CT] vera — — C=
- E Hei
TRACK E ALT 1 ODGoDETaDPCDDO
23458 7 8 89 101° 12
четы!
Notes | 3 |
e The remaining time will not be displayed for track
number 25 or higher. -
e If desired, you can change brightness of the display
in three degrees by pressing the MODE button.
You can have tracks on the disc played in a random sequence selected by the unit's microcomputer.
DIL Jo LI] En
| name ©
2 OPEN/CLOSE
RANDOM
—
To cancel random-sequence play
Press the STOP button or RANDOM button once again,
or open the disc tray by pressing the OPEN/CLOSE
button.
Notes
e This feature will not function during programming, or
during programmed play.
® If the SKIP == button is pressed during random-
sequence play, the next randomly programmed track will
be played. If the SKIP ~<a button is pressed, play will
return to the beginning of the track now being played.
This indication appears while the unit is
/ mixing up tracks.
e Total remaining time on the disc will not be displayed
during random-sequence play.
You can play any desired track or the entire disc repeatedly by pressing the REPEAT button. The repeat-play mode will
change whenever you press the REPEAT button.
C=
—
Л H воопоосоооОВ:
(OFF)
E
REPEAT
Li O009ODONO0DODO
SINGLE REPEAT (S)
Only a designated track is played repeatediy.
FULL REPEAT (F)
All tracks (the entire disc) are played repeatedly.
* In the programmed-play mode, all programmed tracks
are played repeatedly.
Notes
® Repeat play mode can be set in both the play mode
and stop mode. |
® Repeat play is also possible during the random-
sequence play mode.
EH MANUALLY PROGRAMMED PLAY
You can enjoy listening to your favorite tracks in any desired order by a programmed play. As many as 25 tracks can be
programmed for a disc.
. J ro
a. 1
1 ol | EE O0
II SPS = = O 3
CT
1 Set the unit in the stop mode.
3] SEARCH GP
OsTOP СЕ
A TRACK
SKIP >
PROG PROG STEP
DISC TOTAL ‚= _
TRACK Hoo
PROG = = } Li 7 * Re
peat step 3 to set more programs.
You can select the same track again and again.
> PLAY
Display information at program play
DISG TOTAL mo:
ДСК — — J 7 1 | 00000600202000
-
D
? O
|
DISC A TOTAL 7, Y т \
BECK | A 0000000300000
> в 2“
< 7
|
@
Shows the program number next to be set.
Shows the selected track number.
Shows the total time of the tracks programmed until
now. |
Shows only the numbers of programmed tracks.
ODO
©
* If the total time exceeds 99 minutes and 59 seconds,
the time will not be displayed.
10
Notes
In step 2, if “P-01” does not appear in the display,
press the TIME display mode-select button.
If, during program setting, the TIME display mode-select
button is pressed, the program number display can be
changed to a display of the total time of the
programmed tracks. To return to the previous display,
press the TIME display mode-select button once again.
The SKIP (:<< and >> ) button can be used, but only
within the range of the programmed tracks.
The SEARCH (<< and >>) button can be used for
search throughout all tracks, including unprogrammed
tracks.
The PAUSE mode can also be programmed (one time
only), if so desired, by pressing the PAUSE button
instead of a numeric button. (In this case, "O OB” is
illuminated in the display.)
if, for a compact disc with 25 tracks or more, track
number 25 or higher is programmed, the total time will
not be displayed correctly.
To stop program play
Press the STOP button. The first track number
programmed will be displayed.
To resume play, press the PLAY button. Play begins from
the beginning of the program.
To cancel a programmed setting
There are several methods, as described below.
e Press the STOP button (after programming is completed,
or while the unit is in the stop mode).
® Open the disc tray.
e Switch off the power.
To check programmed data
1.
2.
3
To
If the unit is in the play mode, press the STOP
button.
Press the PROG button.
Each time the SKIP > button is then pressed, the
track numbers and sequential order of the
programmed tracks can be checked one after another.
The display of the track number can be returned
(sequentially in reverse order) by pressing the SKIP
«31 button.
correct programmed data
Follow the procedures in “To check programmed
data”.
Display the track number to be corrected by pressing
the SKIP button.
Press a numeric button on the remote control
transmitter to select a track to replace the displayed
one. The previously programmed track will be cleared
(from the memory) and the new one will be
programmed. (You can aiso select a track using the
SEARCH button on the front panel of the main unit
instead of the numeric buttons.)
After the correction has been completed, once again
press the PROG button.
If the disc includes index numbers, play can be started from any desired index number.
1 In the pause or stop mode, select a track
which has index numbers.
<<] SKIP
||
>
PROG STEP
Select the desired
index number.
To cancel the index search function
Press the INDEX button.
Notes |
® Some discs have index numbers, and some do not.
The index system is a method for sub-dividing tracks
into smaller divisions (such as, for example, the
movements within classical symphonies) for easier
location of those parts. The liner notes with the disc
usually teil if such index numbers are included.
if an index number is selected that is higher than any
index number on that disc, play will start from the last
index number point on the disc.
For some discs, play may begin slightly prior to the
actual designated index point.
If the disc has no encoded index points, play will begin
from the start of the track selected by using the SKIP
button.
The index number can be designated only while the
INDEX number display is illuminated.
11
12
This feature can be conveniently used to program tracks on a disc for recording to tape. By only memorizing the tape’s
total possible recording time, the unit will automatically program tracks or help you to program tracks so they will fit onto
the tape with the least amount of unrecorded space remaining at each end of the tape.
Automatic tape-programming
This is useful for recording a disc onto tape with the order of tracks unchanged.
1 Set the unit in the stop mode.
DsTOP
REPEAT
* By pressing the REPEAT button, the unit
| automatically programs tracks for side A and side B
Enter the tape's total possible recording time. separately considering the tape's total time.
TAPE \ | и | |
| ~ г Begin recording on the tape deck and at the same
oT 10 time press the PLAY button on this unit.
и |
You can select any of four types of tape's length
by pressing the TAPE button.
When this unit (at the end of side A of the tape)
7-46 changes to the pause mode, turn the tape over (to
L 6 a side B). Resume the recording and, at the same
TAPE в | time, press the PLAY button or the PAUSE button
A
(off) on this unit.
5-60 = [-50 Notes
® All tracks may not be programmed if the tape’s length
| | is not enough. To program all tracks, use a longer
Otherwise, you can also enter the tape's total tape.
possible recording time manually. e In step 5, you can check the program data for side A
and side B separately for a moment.
Example:
For a C-64 tape (32 minutes on each side) D @
KID SKIP >> |
|
ии [О тота/ —\
MODE PROG STEP TRACK 7 de IM
CJ 2) | PROG — L dá Oo000cCOnDaDDO
Cr a г @— 200
coco 2355
ss = or N
WO |
Un ]
NE ha AD TRACK (D Shows the number of programmed tracks.
С СЭС | O Shows the total time of programmed tracks.
| @ Shows the side of the tape.
@ Shows the programmed track numbers.
- с
TRACK SINGLES} …
KL
‚ i. Ln 0000000200000
123 46586780 1011 12 13 14 16 18 97 98 19 20
Manual tape-programming
This is useful for recording desired tracks in any desired order onto tape.
a J]!
EL
TT E E
— |
1 Follow steps 1 — 3 on page 12.
DISS TOTAL —
TRACK HI
_ §
E \= 4. AE Гу Li A
—1 2 3 4 5 & 7 8 98 10 11 18 —
77 | IN
00000000000580
Select track numbers (to be recorded for
side A) in the desired order.
/ вы
ra
* Programmed track numbers are illuminated on the
display. You can select a track which can be
programmed for the remaining time of (the side of)
the tape from track numbers flashing on the display,
but you cannot select any darkened track number.
Program a pause mode.
D) PAUSE
Select track numbers (to be recorded for side
B) in the desired order.
Begin recording on the tape deck and at the same
time press the PLAY button on this unit.
When this unit (at the end of side À of the tape)
changes to the pause mode, turn the tape over (to
side B). Resume the recording and, at the same
time, press the PLAY button or the PAUSE button
on this unit.
Notes
©
If, in step 3 or 5, “E rr” appears in the display, the
track number just selected cannot be programmed
because there is not enough time remaining on the
tape. However, at this time, if any other track number
is flashing continuously in the display, you can program
it instead of the unprogrammable one.
In step 3 or 5, each time a selection is made, the track
number and the tape’s remaining time will be displayed,
and then the display will change to indicate the number
of the next program.
In step 3 and 5, you can also select track numbers on
the front panel. (Select a track number by the SEARCH
button and next, set the number as a program by
pressing the right side of the SKIP c= button.
Repeat these steps to set more programs.) in this case,
however, the display information is somewhat different
from mentioned above.
Notes on tape-programming -
e lo check, cancel or correct program data, refer to page
11.
~ * In checking the program data, note that “Pu” appears
between track numbers for side A and side B.
The maximum number of tracks that can be
programmed is 25 (P-01 to P-25). If, however, the
PAUSE mode is inserted, it is counted as one track.
13
14
I Random sequential tape-programming
The unit will automatically program tracks in random sequential order for recording to tape.
| 1 Follow steps 1 — 3 on page 12.
RANDOM
* The unit automatically programs tracks for side A and
side B separately by considering the tape's total time.
Begin recording on the tape deck and at the same
time press the PLAY button on this unit.
When this unit (at the end of side A of the tape)
changes to the pause mode, turn the tape over (to
side B). Resume the recording and, at the same
time, press the PLAY button or the PAUSE button
on this unit.
Notes
e Because the programmed data changes every time the
RANDOM button is pressed, the amount of time
remaining at the end of the tape also change
accordingly.
e If the tape's length is not enough, all tracks cannot be
programmed. In this case, exchange the tape for a
longer one.
e In step 2, you can check the program data for side A
and side B separately for a moment.
© ®
|
SE a TT
TRACK | E de a обепоооСОРОЗОВ
BP; â 6
x —
(D Shows the number of programmed tracks.
Shows the total time of programmed tracks.
© Shows the side of the tape. |
Shows the programmed track numbers.
Battery replacement
if the remote-control transmitter must be used closer to
the main unit, the batteries are weak. Replace both
batteries with new ones.
Notes
e Use only "AAA" (RO3) batteries for replacement.
® Be sure the polarities are correct. (See the illustration
inside the battery compartment.)
® Remove the batteries if the remote-control transmitter
will not be used for an extended period of time.
® If batteries leak, immediately dispose of them. Avoid
touching the leaked material or letting it come in
contact with clothing, etc. Clean the battery
compartment thoroughly before installing new batteries.
Remote-control transmitter operation range
/ Da
Remote-control
sensor
Within approximately
N 7 m (23 feet)
Notes
e There should be no large obstacles between. the
~ remote-control transmitter and the main unit.
e |f the remote control sensor is struck by strong lighting
(of an inverter type of fluorescent lamp etc.), it may
happen that the remote-control transmitter does not work
correctly. In this case, change the position of the main
unit to avoid being lit directly. |
IPACT DISCS
e This compact-disc player is designed only for
reproduction of compact discs bearing the eS mark.
Never attempt to load any other type of disc into the
unit.
The unit will also play 3-inch (8-cm) compact discs.
® To remove a disc from its storage case, open the case
and then press down at the center; with a finger
through the center hole and the outer edges held as
shown in the illustration, lift the disc out carefully.
® Always handle the disc with care so that its surface is
not scratched.
e Compact discs are not subjected to wear during play,
but damage to the disc surface when the disc is being
handled can adversely affect the disc's play.
@ Compact discs are not affected by small particles of
dust or fingerprints on their playing surface, but even so
they should be kept clean. Wipe by using a clean, dry
cloth. Do not wipe with a circular motion; wipe straight
outward from the center.
e Do not try to clean the disc's surface by using any type
of disc cleaner, record spray, anti-static spray or liquid,
or any other chemical-based liquid, because such
substances might irreparably damage the disc's surface.
® Do not expose discs to direct sunlight, high temperature
or high humidity for a long period of time, because
these might warp or otherwise damage the disc.
To play a 3-inch (8-cm) CD
Place it in the inner recessed area of the disc tray. Do
not put a normal (5-inch/12-cm) CD on top of a 3-inch
CD.
15
TROUB
LESHOOTING
if the unit fails to operate normally, check the following paints to determine whether the problem can be corrected by the simple measures suggested. if it
cannot, or if the problem is not listed in the SYMPTOM column, disconnect the unit's power cord and contact your dealer or service center for assistance.
Sue
| The player does not switch ON when the The power cord is not Securely connect the power cord.
POWER switch is pressed. connected.
The disc tray does not close completely. A foreign object is obstructing the tray. Carefully check the disc tray and remove the foreign
| | | object.
The DISC indicator does not illuminate. The disc has been loaded upside down. Load the disc correctly.
The disc is damaged. | Check the disc care fully; replace it if necessary.
There is moisture on the laser pickup. Wait 20 to 30 minutes after switching the unit ON
betore trying ta play a disc.
Play does not begin. The disc has been loaded upside down. Reload the disc with the label side up.
The disc is dirty. Clean the disc.
Play is delayed, or begins at the wrong The disc may be scratched or damaged. Check the disc carefully; replace it if necessary.
place.
No sound. | | Improper output cable connections. Connect the cables properly. If the problem persists,
| the cables may be defective.
Improper amplifier operation. - Set the amplifier controls to the correct input
selection.
Sound “skips”. The player is being subjected to vibrations or Relocate the player.
impacts.
The disc is dirty. | Clean the disc. |
Sound “hums”. Improper cable connections. | Securely connect the audio cables. if the problem
i persists, the cables may be defective. |
Noise from a nearby tuner. The tuner is too close to the player. | Move the tuner and player farther apart.
Noise from within the disc tray. The disc may be warped. Replace the disc.
The remote-control transmitter does not Direct sunlight or lighting (of an inverter type of Change position of the main unit.
work. flourescent lamp etc.) is striking the remote control
sensor of the main unit.
SPECIFICATIC
AUDIO SECTION | GENERAL
Frequency response .................. 2 Hz — 20 kHz, o dB Power requirements
. ss A U.S.A. and Canada models .................. 120V, 60 Hz
De-emphasis equalization .......................... $0.3 dB Australia and U.K. models 7 240V, 50 Hz
Harmonic distortion+noise ..................... 0.0038% (1 kHz) Europe model 230V 50 Hz
S/N ratio are nene en ener er 105 ов General model CC 110/120/220/240V. 50/60 Hz
Dynamic range REED 98 d Power consumption TS 20W
Wow $ flutter ........................_..._i.een ee Unmeasurable Dimensions (W x H x D) ........... 435 x 925 x 267 mm
Output orage DOV Max. Cenes (17-1/8” x 3-5/8" x 10-1/2”)
Headoh ut ee t (C20 dB) UU 300 mV/150 ohms Weight .... a 3.6 kg (7 Ibs. 15 oz.)
eadphones output ( UT Accessories ............... a enereece. Connection cord
Remote contro! transmitter
Batteries (size "AAA", R03)
Please note that all specifications are subject to change
without notice.
YAMAHA ELECTRONICS CORPORATION, USA 6722 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. +135 MILNER AVE, SCARBCROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, D-2084 RELLINGEN BEI HAMBURG, F.R. OF GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A. 17 RUE DES CAMPANULES, LOGNES 77321 MARNE LA VALLEE CEDEX 2, FRANCE ; a : |
YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND .
YAMAHA SCANDINAVIA AB. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VASTRA FROLUNDA, SWEDEN YAMAHA CORPORATION
YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA
VK62780-0 Printed in Japan BWWB8, G®
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising