Catalogue Sheet: RP Series

Catalogue Sheet: RP Series
Type:
new product
Project/Location:
Contractor:
Prepared By:
Date:
Model No.:
Made in Canada
TYPICAL SPECIFICATIONS
RP SERIES
All-Plastic Pictogram Exit Sign
Commercial-grade,
universal-mount and snap-fit
Supply and install the Ready-Lite® RP pictogram Exit Sign. The equipment shall operate with universal 2-wire
AC input voltage of 120 to 347VAC at less than 2.5W and universal 2-wire DC input voltage from 6 to 24VDC
at 1W consumption for single and double face signs. The sign shall come standard with a canopy and shall
be suitable for wall, end, or ceiling mounting. The frame, faceplates, back plate and canopy shall each be
constructed of a one-piece UV-stabilized thermoplastic material coloured factory white. The light source shall be
white light-emitting diodes (LED) and shall provide even illumination in normal and emergency operation. The
equipment in a Self-powered configuration shall use a sealed Nickel-Cadmium battery of 2.4V nominal voltage.
The equipment shall recharge the battery in 24 hours and stay illuminated at least two hours upon AC failure.
The pictogram Exit Sign shall be listed to the CSA 22.2 No.141-10 standard.
The equipment shall be Ready-Lite® Model: ____________________________________________________ .
Dimensions are approximate and subject to change.
4-1/2” [11.4 cm]
8-7/8” [22.5 cm]
• Durable factory white, thermoplastic
housing
• Universal mounting: wall-, end-, or
ceiling-mount
• Long-life white LED light source
• Certified CSA 22.2 No.141-10 for
pictogram safety signs
• Two-wire universal AC input: 120 to
347VAC; two-wire standard DC input:
6 to 24VDC
• Energy efficient – consumes less than
2.5W in AC mode and only 1W in
DC-remote
• Self-powered model delivers standard
two hours of back-up lighting
• Optional vandal-proof shield and
tamper-proof screws
DIMENSIONS
8” [20.3 cm]
The Ready-Lite® RP Series is a compact
pictogram Exit Sign with an all-in-one,
snap-fit design. Easy to install and
affordable, the RP Series Exit Sign is
ideally suited for commercial applications,
especially those in which large numbers
of Exit Signs are required.
6-1/8” [15.6 cm]
FEATURES
12-1/8” [30.7 cm]
2-1/4” [5.7 cm]
13” [33.0 cm]
POWER CONSUMPTION AND UNIT RATING
MODEL
AC only
AC/DC standard
AC/Special DC
AC SPECS
DC SPECS
120 to 347VAC
120 to 347VAC
120 to 347VAC
less than 2.5W
less than 2.5W
less than 2.5W
6 to 24VDC
36, 48, 120VDC
less than 1.5W
less than 2.5W
Two-wire 120V AC/DC
120VAC
self-powered
120 to 347VAC
less than 2.5W
120VDC
less than 2.5W
less than 3W
nickel-cadmium battery
min. 2 hours
ORDERING INFORMATION
SERIES
RP= plastic pictogram
FACES/MOUNTING
1= single face, universal mounting
2= double face, universal mounting
3= universal face, universal mounting
ENCLOSURE
COLOUR
VOLTAGE
W= factory white
B= black
SP= s elf-powered, 120 to 347VAC
U= u
niversal 120 to 347VAC; 6 to 24VDC
U00= 120 to 347VAC only
U36= 120 to 347VAC; 36VDC
U48= 120 to 347VAC; 48VDC
U120= 120 to 347VAC; 120VDC
24= 2-wire 6 to 24VDC
2120= 2-wire 120VAC/VDC
OPTIONS
TP= tamper-proof screws*
VR= vandal resistant shield with
tamper-proof screws*
*990.0119-RL= T
amper-proof bit (sold
separately)
* Option VR not available with
universal face
EXAMPLE: RP1WUVR
Unlike EXIT signs, the pictogram sign is not available in double arrow configurations.
52
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement