Trendnet TPE-102S Power over Ethernet Splitter Quick Installation Guide
Add to my manuals12 Pages
Trendnet TPE-102S is a Power over Ethernet (PoE) splitter that enables you to power non-PoE devices through an Ethernet cable using PoE technology. With four different voltage options (5V, 7.5V, 9V, and 12V), it's compatible with various devices like access points, VoIP phones, and IP cameras that support passive PoE. Simply connect your PoE switch or PoE injector to the Data In port, then your non-PoE device to the Data Out port, and use the included jumper cable to supply power.
advertisement
Quick Installation Guide
TPE-101I
TPE-102S
Français .....................................................................................................
1. Avant de commencer ........................................................................
2. Installation du matériel ......................................................................
1
1
3
Technical Specifications ................
............................................
................
21
Troubleshooting ........................................................................................
22
Version 06.20.2007
1. Avant de commencer
Contenu de l'emballage
Câble Jumper (TPE-102S)
Remarque: Le TPE-101I et le TPE-102S ne supportent que les périphériques
Power Over Ethernet (PoE) qui repectent la norme IEEE 802.3af
Remarque: Le TPE-102S ne supporte que les périphériques non-PoE avec une puissance de sortie de 5V, 7,5V, 9V ou de 12V.
Paneau frontal
TPE-101I
Power
S'éclaire en vert lorsque le cordon d'alimentation est branché à une prise et que le périphérique PoE est relié à l'injecteur.
TPE-102S
POWER
S'éclaire en vert lorsqu'un périphérique PoE est branché au splitter.
1
Français
Application
Power over Ethernet Injector
(TPE-101I)
Power + Data (PoE)
PoE Device
Power
Data
Power + Data
Power over Ethernet Injector
(TPE-101I)
Power
Data
Power
Jack
Power
Jack
8-Port 10/100Mbps
Fast Ethernet Switch
(TE100-S8)
Power
Data
8-Port 10/100Mbps
Fast Ethernet Switch
(TE100-S8)
Power + Data
(PoE)
Data
5V/7.5V/9V/12V Power
Power
5V/7.5V/9V/12V DC Power
Data
Power + Data
Power over Ethernet Splitter
(TPE-102S)
Non-PoE Device which uses
5V/7.5V/9V/12V Power Input
PoE Switch
(TPE-S44)
5V/7.5V/9V/12V Power
Data
Power + Data
Power over Ethernet Splitter
(TPE-102S)
Power + Data (PoE)
Power + Data
(PoE)
Power over Ethernet Injector
(TPE-101I)
Power
Data
Data
5V/7.5V/9V/12V Power
Non-PoE Device which uses
5V/7.5V/9V/12V Power Input
Power
Jack
8-Port 10/100Mbps
Fast Ethernet Switch
(TE100-S8)
Power over Ethernet Splitter
(TPE-102S)
Power
5V/7.5V/9V/12V Power
Data
Power + Data
Data
5V/7.5V/9V/12V Power
Non-PoE Device which uses
5V/7.5V/9V/12V Power Input
2
Français
2. Installation du matériel
Utilisation du TPE-101I avec un périphérique PoE
1. Branchez le cordon
d'alimentation à l'injecteur.
Branchez ensuite ce dernier à une prise.
2. Branche un câble CAT-5 entre un switch et le port
Data In du
TPE-101I.
3. Branchez un câble CAT-5 entre un périphérique PoE (p. ex. le
TEW-434APB) et le port
PoE Out
du TPE-101I.
3
Français
Utilisation du TPE-102S avec un périphérique non PoE
Remarque: notez la puissance de sortie de votre périphérique non PoE. Le
TPE-102S ne supporte que les périphériques non PoE avec une puissance de sortie de 5V, 7,5V, 9V ou de 12V.
1. Sélectionnez le voltage adéquat
(5V, 7,5V, 9V ou 12V)
.
2. Branchez un câble Ethernet entre le switch PoE et le port PoE In du
TPE-102S.
3. Branchez le câble Ethernet du port
Data-Out du TPE-102S au port
LAN du périphérique non PoE (p. ex. le TEW-450APB).
4. Branchez le câble Jumper entre un périphérique non PoE (p. ex. le
TEW-450APB) et le TPE-102S.
L'installation est maintenant complète.
Enregistrez votre produit
Afin d’être sûr de recevoir le meilleur niveau de service clientèle et le meilleur support possibles, veuillez prendre le temps d’enregistrer votre produit en ligne sur:
www.trendnet.com/register
Nous vous remercions d’avoir choisi Trendnet
4
Français
Applicable Standards
Ethernet Pin Usage
Fixed Ports
Speed
LED Indicator
Switches
Cable
Dimensions
Power
Power Consumption
Operating Temperature
Storage Temperature
Humidity
Certificates
Technical Specifications
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3af Power Over Ethernet (PoE)
Data: 1, 2, 3, 6
Power: 4, 5 (V+), 7, 8 (V-)
TPE-101I: 1 Data In, 1 PoE Out
TPE-102S: 1 Data Out, 1 PoE In
10/20Mbps for half/full-duplex
100/200Mbps for half/full-duplex
POWER
TPE-102S: DC OUT (5V, 7.5V, 9V, 12V)
10BASE-T:
UTP/STP Cat. 3,4,5
100BASE-TX:
UTP/STP Cat. 5, 5e, 6
TPE-101I: 115 x 57 x 35mm (4.5 x 2.2 x 1.4 in.)
TPE-102S: 80 x 54 x 24mm (3.2 x 2.13.35 x 0.9 in.)
TPE-101I: 48V DC, 0.3A
TPE-102S: DC Output 5V , 7.5V, 9V, or 12V
TPE-101I: 15.5 Watts (max)
TPE-102S: 10 Watts (max)
0°C ~ 45°C (32°F ~ 104°F)
-40°C ~ 70°C (14°F ~ 158°F)
10 ~ 90%, non-condensing
FCC, CE
5
Troubleshooting
Q1: Why is the POWER LED off on the TPE-101I?
A1:
First, make sure the TPE-101I is connected into a power outlet. Second, make sure that the PoE device is connected properly to the TPE-101I. Third, try using another CAT-5 cable.
Q2: Why is the POWER LED off on the TPE-102S?
A2:
First, make sure that the TPE-102S is connected properly to the PoE switch or
TPE-101I (See 3.Hardware Installation). Second, try using another CAT-5 cable.
Q3: Will the TPE-101I work with any PoE device?
A3:
Any PoE device that follows the IEEE 802.3af standard will work with
TPE-101I.
Q4: Will the TPE-102S work with any non-PoE device?
A4:
Non-PoE devices such as access points will work with the TPE-102S only if the non-PoE device operates at 5V, 7.5V, 9V or 12V.
Q5: I connected my non-PoE device into the TPE-102S, but my switch does not recognize the device.
A5:
Power cycle the non-PoE device by either pulling out the power adapter connector from the PoE injector or disconnecting the CAT 5 cable from the PoE
Out port. Reinsert the connection after 5-10 seconds have elapsed.
If you still encounter problems or have any questions regarding the PoE Injector/Splitter, please contact TRENDnet's Technical Support Department.
6
Limited Warranty
TRENDnet warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase.
TPE-101I/TPE-102S - 5 Year Warranty
If a product does not operate as warranted above during the applicable warranty period,
TRENDnet shall, at its option and expense, repair the defective product or deliver to customer an equivalent product to replace the defective item. All products that are replaced will become the property of TRENDnet. Replacement products may be new or reconditioned.
TRENDnet shall not be responsible for any software, firmware, information, or memory data of customer contained in, stored on, or integrated with any products returned to
TRENDnet pursuant to any warranty.
There are no user serviceable parts inside the product. Do not remove or attempt to service the product through any unauthorized service center. This warranty is voided if
(i) the product has been modified or repaired by any unauthorized service center, (ii) the product was subject to accident, abuse, or improper use (iii) the product was subject to conditions more severe than those specified in the manual.
Warranty service may be obtained by contacting TRENDnet office within the applicable warranty period for a Return Material Authorization (RMA) number, accompanied by a copy of the dated proof of the purchase. Products returned to TRENDnet must be preauthorized by TRENDnet with RMA number marked on the outside of the package, and sent prepaid, insured and packaged appropriately for safe shipment.
7
WARRANTIES EXCLUSIVE: IF THE TRENDNET PRODUCT DOES NOT OPERATE
AS WARRANTED ABOVE, THE CUSTOMER’S SOLE REMEDY SHALL BE, AT
TRENDNET’S OPTION, REPAIR OR REPLACEMENT. THE FOREGOING
WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER
WARRANTIES, EXPRESSED OR IMPLIED, EITHER IN FACT OR BY OPERATION OF
LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. TRENDNET
NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT
ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION,
MAINTENANCE OR USE OF TRENDNET’S PRODUCTS.
TRENDNET SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND
EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES
NOT EXIST OR WAS CAUSED BY CUSTOMER’S OR ANY THIRD PERSON’S
MISUSE, NEGLECT, IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED
ATTEMPTS TO REPAIR OR MODIFY, OR ANY OTHER CAUSE BEYOND THE
RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING, OR OTHER
HAZARD.
LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW TRENDNET
ALSO EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER
BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL,
CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND,
OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF
INFORMATION OR DATE, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN
CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE,
PERFORMANCE, FAILURE, OR INTERRUPTION OF THE POSSIBILITY OF SUCH
DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND
OF THE PURCHASE PRICE PAID, AT TRENDNET’S OPTION. THIS DISCLAIMER OF
LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED
HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE.
Governing Law: This Limited Warranty shall be governed by the laws of the state of
California.
Note: AC/DC Power Adapter, Cooling Fan, Cables and Power Supply carry a 1-Year
Warranty
8
Certifications
This equipment has been tested and found to comply with FCC and CE Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received. Including interference that may cause undesired operation.
Waste electrical and electronic products must not be disposed of with household waste. Please recycle where facilities exist. Check with you Local
Authority or Retailer for recycling advice.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO
OPERATE THE EQUIPMENT.
ADVERTENCIA EN CASO DE REQUERIR AC ADAPTER
En todos nuestros equipos se mencionan claramente las caracteris-ticas del adaptador de alimentacón necesario para su funcionamiento El uso de un adaptador distinto al mencionado puede producir daños fisicos y/o daños al equipo conectado.
TRENDnet Technical Support
Toll Free Telephone: 1(866) 845-3673
24/7 Tech Support
Europe
.
.
.
.
Toll Free Telephone: +00800 60 76 76 67
English/Espanol - 24/7
Francais/Deutsch - 11am-8pm, Monday - Friday MET
Worldwide
Telephone: +(31) (0) 20 504 05 35
English/Espanol - 24/7
Francais/Deutsch - 11am-8pm, Monday - Friday MET
Product Warranty Registration
Please take a moment to register your product online.
Go to TRENDnet’s website at http://www.trendnet.com/register
20675 Manhattan Place
Torrance, CA 90501
USA
Copyright ©2007. All Rights Reserved. TRENDnet.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project