Motorola | MOTOTRBO DP2600 | User guide | Motorola MOTOTRBO DP2600 User guide

Motorola MOTOTRBO DP2600 User guide
PROFESSIONAL DIGITAL TWO-WAY RADIO
MOTOTRBO™
DP2600
LIMITED KEYPAD PORTABLE
USER GUIDE
LKP_EMEA.book Page i Wednesday, March 28, 2012 1:35 PM
Contents
This User Guide contains all information you need to use the
MOTOTRBO DP2600 Digital Portable Radio.
Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v
Important Safety Information . . . . . . . . . . . . . . . . . vi
Product Safety and RF Exposure Compliance . . .vi
Firmware Version . . . . . . . . . . . . . . . . . . . . . . . . . . . vi
Computer Software Copyrights . . . . . . . . . . . . . . . vii
Handling Precautions . . . . . . . . . . . . . . . . . . . . . . viii
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
How to Use This Guide . . . . . . . . . . . . . . . . . . . . . . . 1
What Your Dealer/System Administrator Can
Tell You . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Preparing Your Radio for Use . . . . . . . . . . . . . . . . . . 2
Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . 2
Attaching the Battery . . . . . . . . . . . . . . . . . . . . . . . . . 3
Attaching the Antenna . . . . . . . . . . . . . . . . . . . . . . . . 3
Attaching the Belt Clip . . . . . . . . . . . . . . . . . . . . . . . . 4
Attaching the Universal Connector Cover
(Dust Cover) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Attaching the Accessory Connector . . . . . . . . . . . . . 5
Powering Up the Radio . . . . . . . . . . . . . . . . . . . . . . . 5
Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . . . 6
Identifying Radio Controls . . . . . . . . . . . . . . . . . . . . 7
Radio Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Programmable Buttons . . . . . . . . . . . . . . . . . . . . . . . 9
Assignable Radio Functions . . . . . . . . . . . . . . . . . 9
Assignable Settings or Utility Functions . . . . . . . . 10
Accessing the Programmed Functions . . . . . . . . . . 11
Push-To-Talk (PTT) Button . . . . . . . . . . . . . . . . . . . 11
Switching Between Conventional Analog and
Digital Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
IP Site Connect . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Linked Capacity Plus . . . . . . . . . . . . . . . . . . . . . . . 14
Identifying Status Indicators . . . . . . . . . . . . . . . . . . 15
Display Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Call Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Advanced Menu Icons . . . . . . . . . . . . . . . . . . . . . . 17
Mini Notice Icons . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Sent Item Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
LED Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Audio Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Indicator Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Making and Receiving Calls . . . . . . . . . . . . . . . . . . 20
Selecting a Zone . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Selecting a Channel . . . . . . . . . . . . . . . . . . . . . . . . 21
Receiving and Responding to a Radio Call . . . . . . 22
English
i
LKP_EMEA.book Page ii Wednesday, March 28, 2012 1:35 PM
ii
Receiving and Responding to a Group Call . . . .
Receiving and Responding to a Private Call . . .
Receiving an All Call . . . . . . . . . . . . . . . . . . . . . .
Receiving and Responding to a Selective Call .
Making a Radio Call . . . . . . . . . . . . . . . . . . . . . . . .
Making a Call with the Channel Selector Knob . .
Making a Selective Call . . . . . . . . . . . . . . . . . . .
Stopping a Radio Call . . . . . . . . . . . . . . . . . . . . . .
Talkaround . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Monitoring Features . . . . . . . . . . . . . . . . . . . . . . . .
Monitoring a Channel . . . . . . . . . . . . . . . . . . . . .
Permanent Monitor . . . . . . . . . . . . . . . . . . . . . . .
22
23
24
25
26
26
28
29
30
30
30
31
Advanced Features . . . . . . . . . . . . . . . . . . . . . . . . .
Radio Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sending a Radio Check . . . . . . . . . . . . . . . . . . .
Scan Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Viewing an Entry in the Scan List . . . . . . . . . . . .
Editing the Scan List . . . . . . . . . . . . . . . . . . . . . .
Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Starting and Stopping Scan . . . . . . . . . . . . . . . .
Responding to a Transmission During a Scan . .
Deleting a Nuisance Channel . . . . . . . . . . . . . . .
Restoring a Nuisance Channel . . . . . . . . . . . . . .
Vote Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contacts Settings . . . . . . . . . . . . . . . . . . . . . . . . . .
32
32
32
33
33
34
35
36
36
37
37
38
38
English
Making a Group Call from Contacts . . . . . . . . . .
Making a Private Call from Contacts . . . . . . . . .
Setting Default Contact . . . . . . . . . . . . . . . . . . .
Call Indicator Settings . . . . . . . . . . . . . . . . . . . . . .
Activating and Deactivating Call Ringers for
Call Alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Activating and Deactivating Call Ringers for
Private Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Activating and Deactivating Call Ringers for
Selective Call . . . . . . . . . . . . . . . . . . . . . . . . . . .
Assigning Ring Styles . . . . . . . . . . . . . . . . . . . .
Escalating Alarm Tone Volume . . . . . . . . . . . . . .
Call Log Features . . . . . . . . . . . . . . . . . . . . . . . . .
Viewing Recent Calls . . . . . . . . . . . . . . . . . . . . .
Deleting a Call from a Call List . . . . . . . . . . . . . .
Call Alert Operation . . . . . . . . . . . . . . . . . . . . . . . .
Receiving and Responding to a Call Alert . . . . .
Making a Call Alert from the Contacts List . . . . .
Making a Call Alert with the One Touch Access
Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Emergency Operation . . . . . . . . . . . . . . . . . . . . . .
Sending an Emergency Alarm . . . . . . . . . . . . . .
Sending an Emergency Alarm with Call . . . . . . .
Sending an Emergency Alarm with Voice to
Follow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Reinitiating an Emergency Mode . . . . . . . . . . . .
39
39
40
41
41
41
42
42
43
43
43
44
45
45
45
46
46
47
48
49
50
LKP_EMEA.book Page iii Wednesday, March 28, 2012 1:35 PM
Exiting Emergency Mode . . . . . . . . . . . . . . . . . . . 51
Text Message Features . . . . . . . . . . . . . . . . . . . . . 52
Sending a Quick Text Message . . . . . . . . . . . . . . 52
Sending a Quick Text Message with the
One Touch Access Button . . . . . . . . . . . . . . . . . . 52
Managing Fail-to-Send Text Messages . . . . . . . 53
Resending a Text Message . . . . . . . . . . . . . . . . 53
Forwarding a Text Message . . . . . . . . . . . . . . . . 53
Managing Sent Text Messages . . . . . . . . . . . . . 53
Viewing a Sent Text Message . . . . . . . . . . . . . . 54
Deleting All Sent Text Messages from Sent
Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Receiving a Text Message . . . . . . . . . . . . . . . . . 56
Reading a Text Message . . . . . . . . . . . . . . . . . . . 56
Managing Received Text Messages . . . . . . . . . . 56
Deleting a Text Message from the Inbox . . . . . . . 57
Deleting All Text Messages from the Inbox . . . . . 57
Analog Message Encode . . . . . . . . . . . . . . . . . . . . 58
Sending MDC Message Encode to Dispatcher . . 58
Sending 5-Tone Message Encode to Contact . . . 58
Analog Status Update . . . . . . . . . . . . . . . . . . . . . . 59
Sending Status Update to Predefined Contact . . 59
Viewing a 5-Tone Status Details . . . . . . . . . . . . . 59
Privacy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Dual Tone Multi Frequency (DTMF) . . . . . . . . . . . . 61
Multi-Site Controls . . . . . . . . . . . . . . . . . . . . . . . . . 61
Starting an Automatic Site Search . . . . . . . . . . . . 61
Stopping an Automatic Site Search . . . . . . . . . . . 62
Starting a Manual Site Search . . . . . . . . . . . . . . . 63
Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Radio Disable . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Radio Enable . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Lone Worker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Password Lock Features . . . . . . . . . . . . . . . . . . . . 66
Accessing the Radio from Password . . . . . . . . . . 66
Unlocking the Radio from Locked State . . . . . . . 67
Turning the Password Lock On or Off . . . . . . . . . 67
Changing the Password . . . . . . . . . . . . . . . . . . . . 68
Notification List . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Accessing the Notification List . . . . . . . . . . . . . . . 68
Utilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Turning the Radio Tones/Alerts On or Off . . . . . . 69
Setting the Tone Alert Volume Offset Level . . . . 69
Turning the Talk Permit Tone On or Off . . . . . . . 70
Setting the Power Level . . . . . . . . . . . . . . . . . . . . 70
Adjusting the Display Brightness . . . . . . . . . . . . . 71
Controlling the Display Backlight . . . . . . . . . . . . . 71
Setting the Squelch Level . . . . . . . . . . . . . . . . . . 72
Turning the Introduction Screen On or Off . . . . . . 72
Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Turning the LED Indicator On or Off . . . . . . . . . . 73
iii
English
LKP_EMEA.book Page iv Wednesday, March 28, 2012 1:35 PM
Turning the Voice Operating Transmission (VOX)
Feature On or Off . . . . . . . . . . . . . . . . . . . . . . . . 73
Voice Announcement . . . . . . . . . . . . . . . . . . . . . 74
Call Forwarding . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Menu Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Analog Mic Automatic Gain Control (AGC) . . . . . 76
Digital Mic AGC . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Intelligent Audio . . . . . . . . . . . . . . . . . . . . . . . . . 77
Accessing General Radio Information . . . . . . . . 78
Front Panel Programming (FPP) . . . . . . . . . . . . . . 79
Entering FPP Mode . . . . . . . . . . . . . . . . . . . . . . . 79
Editing FPP Mode Parameters . . . . . . . . . . . . . . 79
Batteries and Chargers Warranty . . . . . . . . . . . . . 81
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
iv
English
LKP_EMEA.book Page v Wednesday, March 28, 2012 1:35 PM
Notes
Notes
v
English
LKP_EMEA.book Page vi Wednesday, March 28, 2012 1:35 PM
Important Safety Information
Firmware Version
Product Safety and RF Exposure Compliance
All the features described in the following sections are
supported by the radio's software version R02.04.00.
Important Safety Information
Before using this product, read the operating
instructions for safe usage contained in the
Product Safety and RF Exposure booklet
enclosed with your radio.
ATTENTION!
This radio is restricted to occupational use only to
satisfy FCC/ICNIRP RF energy exposure
requirements. Before using this product, read the RF
energy awareness information and operating instructions
in the Product Safety and RF Exposure for Portable
Two-Way Radios (Motorola Publication part number
6864117B25) to ensure compliance with RF energy
exposure limits.
For a list of Motorola-approved antennas, batteries, and
other accessories, visit the following website:
http://www.motorolasolutions.com/governmentandenterprise
vi
English
See Checking the Firmware Version and Codeplug
Version and Codeplug Version on page 79 to
determine your radio's software version.
Check with your dealer or system administrator
for more details of all the features supported.
LKP_EMEA.book Page vii Wednesday, March 28, 2012 1:35 PM
Computer Software Copyrights
This voice coding Technology is licensed solely for use
within this Communications Equipment. The user of this
Technology is explicitly prohibited from attempting to
decompile, reverse engineer, or disassemble the Object
Code, or in any other way convert the Object Code into a
human-readable form.
U.S. Pat. Nos. #5,870,405, #5,826,222, #5,754,974,
#5,701,390, #5,715,365, #5,649,050, #5,630,011,
#5,581,656, #5,517,511, #5,491,772, #5,247,579,
#5,226,084 and #5,195,166.
Computer Software Copyrights
The Motorola products described in this manual may
include copyrighted Motorola computer programs stored
in semiconductor memories or other media. Laws in the
United States and other countries preserve for Motorola
certain exclusive rights for copyrighted computer
programs including, but not limited to, the exclusive right
to copy or reproduce in any form the copyrighted
computer program. Accordingly, any copyrighted
Motorola computer programs contained in the Motorola
products described in this manual may not be copied,
reproduced, modified, reverse-engineered, or distributed
in any manner without the express written permission of
Motorola. Furthermore, the purchase of Motorola
products shall not be deemed to grant either directly or by
implication, estoppel, or otherwise, any license under the
copyrights, patents or patent applications of Motorola,
except for the normal non-exclusive license to use that
arises by operation of law in the sale of a product.
The AMBE+2TM voice coding Technology embodied in
this product is protected by intellectual property rights
including patent rights, copyrights and trade secrets of
Digital Voice Systems, Inc.
vii
English
LKP_EMEA.book Page viii Wednesday, March 28, 2012 1:35 PM
Handling Precautions
The MOTOTRBO DP2600 Portable Radio meets IP55
specifications with antenna attached, allowing the radio to
withstand adverse field conditions such as being used in rain or
dusty environment.
Handling Precautions
• If the radio has been exposed to water or rain, shake the
viii
radio well to remove any water that may be trapped inside the
speaker grille, microphone port and aesthetic cover (if
applicable). Trapped water in speaker grille and microphone
port could cause decreased audio performance. If aesthetic
cover is attached onto radio, trapped water in aesthetic cover
could cause corrosion on the slim connector interface gold
contacts.
• If the radio’s battery contact area has been exposed to water,
clean and dry battery contacts on both the radio and the
battery before attaching the battery to the radio. The residual
water could short-circuit the radio.
• If the radio has been exposed to corrosive substance
(e.g.saltwater), rinse the radio and battery in fresh water then
dry the radio and battery.
• To clean the exterior surfaces of the radio, use a diluted
solution of mild dishwashing detergent and fresh water (i.e.
one teaspoon of detergent to one gallon of water).
• The radio with antenna attached properly is designed to be
protected against dust and low pressure jets of water
projected with nozzle 6.3mm diameter at flow rate of 12.5 l/
min, with water pressure at 30 kN/m2 and from a distance of
English
2.5m to 3m for at least 3 min. Exceeding either maximum limit
or use without antenna may result in damage to the radio.
• When cleaning the radio, do not use a high pressure jet spray
on the radio as this may cause to leak.
Do not disassemble the radio. This could
damage radio seals and result in leak paths into
the radio. Radio maintenance should only be
done in service depot that is equipped to test
and replace the seal on the radio.
LKP_EMEA.book Page 1 Wednesday, March 28, 2012 1:35 PM
Getting Started
How to Use This Guide
Selected features are also available on the single-site trunking
mode, Capacity Plus. See Capacity Plus on page 13 for more
information.
Selected features are also available in the multi-site trunking
mode, Linked Capacity Plus. See Linked Capacity Plus on
page 14 for more information.
This User Guide covers the basic operation of the MOTOTRBO
Portables.
What Your Dealer/System Administrator Can
Tell You
However, your dealer or system administrator may have
customized your radio for your specific needs. Check with your
dealer or system administrator for more information.
You can consult your dealer or system administrator about the
following:
Throughout this publication, the icons below are used to
indicate features supported in either the conventional Analog
mode or conventional Digital mode:
Getting Started
Take a moment to review the following:
How to Use This Guide . . . . . . . . . . . . . . . . . . . . . . . . . page 1
What Your Dealer/System Administrator
Can Tell You. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 1
For features that are available in a conventional multi-site
mode, see IP Site Connect on page 13 for more information.
• Is your radio programmed with any preset conventional
channels?
• Which buttons have been programmed to access other
features?
Indicates a conventional Analog Mode-Only feature.
• What optional accessories may suit your needs?
• What are the best radio usage practices for effective
Indicates a conventional Digital Mode-Only feature.
communication?
• What maintenance procedures will help promote longer radio
For features that are available in both conventional Analog and
Digital modes, no icon is shown.
life?
1
English
LKP_EMEA.book Page 2 Wednesday, March 28, 2012 1:35 PM
Charging the Battery
Preparing Your Radio for Use
Preparing Your Radio for Use
Assemble your radio by following these steps:
Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . .
Attaching the Battery. . . . . . . . . . . . . . . . . . . . . . . . . . .
Attaching the Antenna. . . . . . . . . . . . . . . . . . . . . . . . . .
Attaching the Belt Clip. . . . . . . . . . . . . . . . . . . . . . . . . .
Attaching the Universal Connector
Cover (Dust Cover) . . . . . . . . . . . . . . . . . . . . . . . . . .
Powering Up the Radio . . . . . . . . . . . . . . . . . . . . . . . . .
Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . . . . .
2
English
page 2
page 3
page 3
page 4
page 4
page 5
page 6
Your radio is powered by aNickel Metal-Hydride (NiMH) or
Lithium-Ion (Li-lon) battery. To avoid damage and comply with
warranty terms, charge the battery using a Motorola charger
exactly as described in the charger user guide.
Charge a new battery 14 to 16 hours before initial use for best
performance.
IMPORTANT: ALWAYS charge your IMPRES battery with an
IMPRES charger for optimized battery life and
valuable battery data. IMPRES batteries
charged exclusively with IMPRES chargers
receive a 6-month capacity warranty extension
over the standard Motorola Premium battery
warranty duration.
LKP_EMEA.book Page 3 Wednesday, March 28, 2012 1:35 PM
Attaching the Battery
Attaching the Antenna
To remove the battery,
turn the radio off. Move
the battery latch into
unlock position and
hold, and slide the
battery down and off
the rails.
With the radio turned off, set the antenna in its receptacle and
turn clockwise.
To remove the antenna, turn the antenna counterclockwise.
Preparing Your Radio for Use
Align the battery with the rails on the back of the radio. Press
the battery firmly, and slide upward until the latch snaps into
place.
If antenna needs to be replaced, ensure that only
MOTOTRBO antennas are used. Neglecting this will
damage your radio.
Battery Latch
3
English
LKP_EMEA.book Page 4 Wednesday, March 28, 2012 1:35 PM
Attaching the Belt Clip
Preparing Your Radio for Use
Align the grooves on the clip
with those on the battery and
press downward until you hear
a click.
To remove the clip, press the
belt clip tab away from the
battery using a key. Then slide
the clip upward and away from
the radio.
4
English
Attaching the Universal Connector Cover
(Dust Cover)
The universal connector is located on the antenna side of the
radio. It is used to connect MOTOTRBO accessories to the
radio.
Insert the slanted end of
the cover into the slots
above the universal
connector. Press
downward on the cover to
seat the dust cover
properly on the Universal
Connector.
1
Secure the dust cover to
the radio by pushing the
latch upwards.
2
3
To remove the dust cover,
push the latch downwards.
Lift the cover up and slide
down the dust cover from
the universal connector to
remove it.
Replace the dust cover when the universal connector is not in
use.
LKP_EMEA.book Page 5 Wednesday, March 28, 2012 1:35 PM
Attaching the Accessory Connector
Powering Up the Radio
To attach the accessory
connector, refer to the steps
shown in the diagram.
1
2
3
To remove the accessory
connector, refer to the steps
shown in the diagram.
Rotate the On/Off/Volume
Control Knob clockwise
until you hear a click. You
see MOTOTRBO (TM) on the
radio’s display momentarily,
followed by a welcome
message.
The LED lights up solid
green and the Home screen
lights up if the backlight
setting is set to turn on
automatically.
LED
Indicator
Preparing Your Radio for Use
The accessory connector is
to be secured to the
universal connector on the
antenna side of the radio.
3
2
1
5
English
LKP_EMEA.book Page 6 Wednesday, March 28, 2012 1:35 PM
Preparing Your Radio for Use
NOTE: The Home screen does not light up during a power up if
the LED indicator is disabled (see Turning the LED
Indicator On or Off on page 73).
Adjusting the Volume
A brief tone sounds, indicating that the power up test is
successful.
To increase the volume,
turn the On/Off/Volume
Control Knob clockwise.
NOTE: There is no power up tone if the radio tones/alerts
function is disabled (see Turning the Radio Tones/
Alerts On or Off on page 69).
To decrease the volume,
turn this knob
counterclockwise.
If your radio does not power up, check your battery. Make sure
that it is charged and properly attached. If your radio still does
not power up, contact your dealer.
To turn off the radio, rotate this knob counterclockwise until you
hear a click. You see a brief Powering Down on the radio’s
display.
6
English
NOTE: Your radio can be
programmed to
have a minimum
volume offset
where the volume
level cannot be
turned down fully.
Check with your
dealer or system
administrator for
more information.
LKP_EMEA.book Page 7 Wednesday, March 28, 2012 1:35 PM
Identifying Radio Controls
Digital Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 12
IP Site Connect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 13
Capacity Plus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 13
Linked Capacity Plus . . . . . . . . . . . . . . . . . . . . . . . . . . page 14
Identifying Radio Controls
Take a moment to review the following:
Radio Controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 8
Programmable Buttons . . . . . . . . . . . . . . . . . . . . . . . . . page 9
Accessing the Programmed Functions . . . . . . . . . . . . page 11
Push-To-Talk (PTT) Button . . . . . . . . . . . . . . . . . . . . . page 11
Switching Between Conventional Analog and
7
English
LKP_EMEA.book Page 8 Wednesday, March 28, 2012 1:35 PM
Radio Controls
18
1
Identifying Radio Controls
2
5
Microphone
6
Side Button 1*
7
Side Button 2*
8
Left Navigation Button
17
9
Menu Button
4
16
10
Front Button P1*
11
OK Button
12
Front Button P2*
13
Back/Home Button
14
Right Navigation Button
15
Display
16
Speaker
17
Universal Connector for Accessories
18
Antenna
15
14
13
7
8
9
10
12
11
1
Channel Selector Knob
2
On/Off/Volume Control Knob
3
LED Indicator
English
Push-to-Talk (PTT) Button
3
5
6
8
4
* These buttons are programmable.
LKP_EMEA.book Page 9 Wednesday, March 28, 2012 1:35 PM
Programmable Buttons
Assignable Radio Functions
Call Alert – Direct access to the radio contacts list to select a
radio contact to send a call alert to.
• Short press – Pressing and releasing rapidly.
Call Forwarding – Toggles Call Forwarding on or off.
• Long press – Pressing and holding for the programmed
Call Log – Selects the call log list.
duration.
• Hold down – Keeping the button pressed.
NOTE: The programmed duration of a button press is
applicable for all assignable radio/utility functions or
settings. See Emergency Operation on page 46 for
more information on the programmed duration of the
Emergency button.
Channel Announcement – Plays zone and channel
announcement voice messages for the current channel.
Emergency – Depending on the programming, initiates or
cancels an emergency alarm or call.
Intelligent Audio On/Off – Toggles intelligent Audio on or off.
Manual Site Roam*‡
– Starts the manual site search.
Mic AGC On/Off – Toggles the internal microphone automatic
gain control (AGC) on or off.
Identifying Radio Controls
Contacts – Provides direct access to the Contacts list.
Your dealer can program the programmable buttons as
shortcuts to radio functions or preset channels/groups
depending on the duration of a button press:
Monitor – Monitors a selected channel for activity.
Nuisance Channel Delete*‡ – Temporarily removes an
unwanted channel, except for the Selected Channel, from the
scan list. The Selected Channel refers to the user’s selected
zone/channel combination from which scan is initiated.
* Not applicable in Capacity Plus
applicable in Linked Capacity Plus
‡ Not
9
English
LKP_EMEA.book Page 10 Wednesday, March 28, 2012 1:35 PM
One Touch Access
– Directly initiates a predefined
Private or Group Call or a Call Alert or a Quick Text message.
Permanent Monitor*‡ – Monitors a selected channel for all
radio traffic until function is disabled.
Transmit Interrupt Remote Dekey
– Stops the
transmission of a remote monitored radio without giving any
indicators, or an ongoing interruptible call to free the channel.
(A Software License Key sold separately is required to use this
feature.)
Privacy
Text Message
– Toggles privacy on or off.
Identifying Radio Controls
Radio Alias and ID – Provides radio alias and ID.
Radio Check
– Determines if a radio is active in a system.
Radio Enable
enabled.
– Allows a target radio to be remotely
Radio Disable
disabled.
– Allows a target radio to be remotely
Scan*‡ – Toggles scan on or off.
Site Lock
or off.
10
English
Voice Announcement On/Off – Toggles Voice Announcement
on or off.
Voice Operating Transmission (VOX) – Toggles VOX on or
off.
Zone – Allows selection from a list of zones.
Repeater/Talkaround*‡ – Toggles between using a repeater
and communicating directly with another radio.
On/Off*‡
– Selects the text message menu.
Assignable Settings or Utility Functions
All Tones/Alerts – Toggles all tones and alerts on or off.
Backlight – Toggles display backlight on or off.
Backlight brightness – Adjusts the brightness level.
– Toggles the automatic site roam on
* Not applicable in Capacity Plus
applicable in Linked Capacity Plus
‡ Not
Power Level – Toggles transmit power level between high and
low.
Squelch
normal.
– Toggles squelch level between tight and
LKP_EMEA.book Page 11 Wednesday, March 28, 2012 1:35 PM
Push-To-Talk (PTT) Button
Accessing the Programmed Functions
The PTT button on the side of the radio serves two basic
purposes:
Identifying Radio Controls
You can access various radio functions through one of the
following ways:
• A short or long press of the
relevant programmable buttons.
OR
<
c
• Use the Menu Navigation Buttons as follows:
e
>
d
1 To access the menu, press the c button. Press the
PTT
Button
appropriate Menu Scroll button (<or >) to access
the menu functions.
2 To select a function or enter a sub-menu, press the e
button.
3 To go back one menu level, or to return to the previous
screen, press the d button. Long press the d button
to return to the Home screen.
NOTE: Your radio automatically exits the menu after a period
of inactivity and returns to your Home screen.
• While a call is in progress, the PTT button allows the radio to
transmit to other radios in the call.
Press and hold down PTT button to talk. Release the PTT
button to listen.
The microphone is activated when the PTT button is pressed.
11
English
LKP_EMEA.book Page 12 Wednesday, March 28, 2012 1:35 PM
• While a call is not in progress, the PTT button is used to make
a new call (see Making a Radio Call on page 26).
Switching Between Conventional Analog and
Digital Mode
If the Talk Permit Tone (see Turning the Talk Permit Tone On
Identifying Radio Controls
or Off on page 70) or the PTT Sidetone
is enabled, wait
until the short alert tone ends before talking.
12
English
During a call, if the Channel Free Indication feature is
enabled on your radio (programmed by your dealer), you
will hear a short alert tone the moment the target radio (the
radio that is receiving your call) releases the PTT button,
indicating the channel is free for you to respond.
Each channel in your radio can be configured as a conventional
analog or conventional digital channel. Use the Channel
Selector Knob to switch between an analog or a digital channel.
Channel
Selector
Knob
You will also hear a continuous talk prohibit tone, if your
call is interrupted, indicating that you should release the
PTT button, for example when the radio receives an
Emergency Call.
When switching from digital to analog mode, certain features
are unavailable. Icons for the digital features (such as
Messages) reflect this change by appearing ‘greyed out’.
Disabled features are hidden in the menu.
Your radio also has features available in both analog and digital
mode. However, the minor differences in the way each feature
works does NOT affect the performance of your radio.
Your radio also switches between digital and analog modes
during a dual mode scan (see Scan on page 35).
LKP_EMEA.book Page 13 Wednesday, March 28, 2012 1:35 PM
IP Site Connect
When the radio moves out of range from one site and into the
range of another, it connects to the new site's repeater to send
or receive calls/data transmissions. Depending on your settings,
this is done automatically or manually.
If the radio is set to do this automatically, it scans through all
available sites when the signal from the current site is weak or
when the radio is unable to detect any signal from the current
site. It then locks on to the repeater with the strongest Received
Signal Strength Indicator (RSSI) value.
In a manual site search, the radio searches for the next site in
the roam list that is currently in range (but which may not have
the strongest signal) and locks on to it.
NOTE: Each channel can only have either Scan or Roam
enabled, not both at the same time.
Channels with this feature enabled can be added to a particular
roam list. The radio searches the channel(s) in the Members
roam list during the automatic roam operation to locate the best
site.
A roam list supports a maximum of 16 channels (including the
Selected Channel).
Check with your dealer or system administrator for more
information.
Capacity Plus
Capacity Plus is a single-site trunking configuration of the
MOTOTRBO radio system, which uses a pool of channels to
support hundreds of users and up to 254 Groups. This feature
allows your radio to efficiently utilize the available number of
programmed channels while in Repeater Mode.
Icons of features not applicable to Capacity Plus are not
available in the menu. You hear a negative indicator tone if you
try to access a feature not applicable to Capacity Plus via a
programmable button press.
Your radio also has features that are available in conventional
digital mode, and Capacity Plus. However, the minor differences
in the way each feature works does NOT affect the performance
of your radio. A Software License Key sold separately is
required to use this feature.
Identifying Radio Controls
This feature allows your radio to extend conventional
communication beyond the reach of a single site, by connecting
to different available sites which are connected via an Internet
Protocol (IP) network.
You cannot manually add or delete an entry to the roam list. A
Software License Key sold separately is required to use this
feature
Check with your dealer or system administrator for more
information on this configuration.
13
English
LKP_EMEA.book Page 14 Wednesday, March 28, 2012 1:35 PM
Linked Capacity Plus
Identifying Radio Controls
Linked Capacity Plus is a multi-site multi-channel trunking
configuration of the MOTOTRBO radio system, combining the
best of both Capacity Plus and IP Site Connect configurations.
14
Linked Capacity Plus allows your radio to extend trunking
communication beyond the reach of a single site, by connecting
to different available sites which are connected via an Internet
Protocol (IP) network. It also provides an increase in capacity by
efficiently utilizing the combined available number of
programmed channels supported by each of the available sites.
When the radio moves out of range from one site and into the
range of another, it connects to the new site's repeater to send
or receive calls/data transmissions. Depending on your settings,
this is done automatically or manually.
If the radio is set to do this automatically, it scans through all
available sites when the signal from the current site is weak or
when the radio is unable to detect any signal from the current
site. It then locks on to the repeater with the strongest Received
Signal Strength Indicator (RSSI) value.
In a manual site search, the radio searches for the next site in
the roam list that is currently in range (but which may not have
the strongest signal) and locks on to it.
Any channel with Linked Capacity Plus enabled can be added
to a particular roam list. The radio searches these channels
during the automatic roam operation to locate the best site.
English
NOTE: You cannot manually add or delete an entry to the roam
list. Check with your dealer or system administrator for
more information.
Similar to Capacity Plus, icons of features not applicable to
Linked Capacity Plus are not available in the menu. You hear a
negative indicator tone if you try to access a feature not
applicable to Linked Capacity Plus via a programmable button
press. A Software License Key sold separately is required to
use this feature.
Check with your dealer or system administrator for more
information on this configuration.
LKP_EMEA.book Page 15 Wednesday, March 28, 2012 1:35 PM
Identifying Status Indicators
Display Icons
The 132 x 36 pixels, monochrome display, liquid crystal display
(LCD) of your radio shows radio status, text entries, and menu
entries.
Advanced Menu Icons . . . . . . . . . . . . . . . . . . . . . . . . . page 17
The following are icons that appear on the status bar at the top
of the radio’s display. Icons are displayed on the status bar,
arranged left-to-right, in order of appearance/usage.
Mini Notice Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 17
Sent Item Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 18
Audio Tones. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 19
Indicator Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 20
Received Signal Strength Indicator (RSSI)
The number of bars displayed represents the radio
signal strength. Four bars indicate the strongest
signal. The icon is only displayed while receiving.
Battery
The number of bars (0 – 4) shown indicates the
charge remaining in the battery. Blinks when the
battery is low.
Identifying Radio Controls
Your radio indicates its operational status through the following:
Identifying Status Indicators. . . . . . . . . . . . . . . . . . . . . page 15
Call Icons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 16
Emergency
Radio is in emergency mode.
Notification
Notification List has one or more missed events.
Scan*‡
Scan feature is enabled.
Scan – Priority 1*‡
Radio detects activity on channel/group designated as
Priority 1
15
English
LKP_EMEA.book Page 16 Wednesday, March 28, 2012 1:35 PM
Scan Priority 2*‡
Radio detects activity on channel/group designated as
Priority 2.
Vote Scan
Vote scan feature is enabled.
Identifying Radio Controls
OR
Monitor
Selected channel is being monitored.
Talkaround*‡
In the absence of a repeater, radio is currently
configured for direct radio to radio communication.
Site Roaming*
The site roaming feature is enabled.
Secure
The Privacy feature is enabled.
Unsecure
The Privacy feature disabled.
Tones Disabled
Tones are turned off.
OR
Power Level
Radio is set at Low Power
Radio is set at High Power
* Not applicable in Capacity Plus
applicable in Linked Capacity Plus
‡ Not
16
English
Call Icons
The following icons appear on the radio’s display during a call.
These icons also appear in the Contacts list to indicate ID type.
Private Call
Indicates a Private Call in progress. In the Contacts
list, it indicates a subscriber alias (name) or ID
(number).
Group Call/All Call
Indicates a Group Call or All Call in progress. In the
Contacts list, it indicates a group alias (name) or ID
(number)
LKP_EMEA.book Page 17 Wednesday, March 28, 2012 1:35 PM
Advanced Menu Icons
Checkbox (Empty)
Indicates the option is not selected.
Checkbox (Checked)
Indicates the option is selected.
Solid Black Box
Indicates the option selected for the menu item with a
sub-menu.
The following icons appear momentarily on the radio’s display
after an action to perform task is take.
Successful Transmission (Positive)
Successful action taken.
Failed Transmission (Negative)
Failed action taken.
Transmission in Progress (Transitional)
Transmitting. This dynamic icon is seen before
indication for Successful Transmission or Failed
Transmission.
Identifying Radio Controls
The following icons appear beside menu items that offer a
choice between two options or as an indication that there is a
sub-menu offering two options.
Mini Notice Icons
17
English
LKP_EMEA.book Page 18 Wednesday, March 28, 2012 1:35 PM
Sent Item Icons
The following icons appear in the Sent Items folder.
LED Indicator
The LED indicator shows the operational status of your radio.
Sent Successfully
The text message is sent successfully.
Identifying Radio Controls
LED Indicator
OR
Send Failed
The text message cannot be sent.
In-Progress
• The text message to a group alias or ID is pending
OR
18
English
transmission.
• The text message to a subscriber alias or ID is
pending transmission, followed by waiting for
acknowledgement.
Blinking red – Radio is transmitting at low battery condition,
receiving an emergency transmission or has failed the self-test
upon powering up.
Solid yellow – Radio is monitoring a conventional channel.
Also indicates fair battery charge when programmable button is
pressed.
Blinking yellow – Radio is scanning for activity or receiving a
Call Alert, or all local Linked Capacity Plus channels are busy.
LKP_EMEA.book Page 19 Wednesday, March 28, 2012 1:35 PM
Solid green – Radio is powering up, or transmitting. Also
indicates full charge of the battery when programmable button
is pressed.
Audio Tones
Alert tones provide you with audible indications of the radio’s
status or the radio’s response to data received.
Continuous Tone A monotone sound. Sounds
continuously until termination.
Periodic Tone
Blinking green – Radio is receiving a non-privacy-enabled call
or data, or detecting activity over the air.
Double blinking green – Radio is receiving a privacy-enabled
call or data.
NOTE: While in conventional mode, when the LED blinks
green, it indicates the radio detects activity over the air.
Due to the nature of the digital protocol, this activity
may or may not affect the radio's programmed
channel.
Repetitive Tone
Sounds periodically depending on the
duration set by the radio. Tone starts,
stops, and repeats itself.
A single tone that repeats itself until it is
terminated by the user.
Momentary Tone Sounds only once for a short period of
time defined by the radio.
Identifying Radio Controls
Double blinking yellow – Radio is no longer connected to the
repeater while in Capacity Plus or Linked Capacity Plus, all
Capacity Plus channels or Linked Capacity Plus channels are
currently busy. Auto roaming is enabled, radio is actively
searching for a new site. Also indicates radio has yet to respond
to a group call alert, or radio is locked.
NOTE: For Capacity Plus and Linked Capacity Plus, there is
no LED indication when the radio is detecting activity
over the air.
19
English
LKP_EMEA.book Page 20 Wednesday, March 28, 2012 1:35 PM
Indicator Tones
High pitched tone
Making and Receiving Calls
Low pitched tone
Once you understand how your MOTOTRBO Portable is
configured, you are ready to use your radio.
Positive Indicator Tone
Making and Receiving Calls
Negative Indicator Tone
20
English
Use this navigation guide to familiarize yourself with the basic
call features:
Selecting a Zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 21
Selecting a Channel. . . . . . . . . . . . . . . . . . . . . . . . . . . page 22
Receiving and Responding to a Radio Call . . . . . . . . . page 22
Making a Radio Call. . . . . . . . . . . . . . . . . . . . . . . . . . . page 26
Stopping a Radio Call . . . . . . . . . . . . . . . . . . . . . . . . . page 29
Talkaround . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 30
Monitoring Features. . . . . . . . . . . . . . . . . . . . . . . . . . . page 30
LKP_EMEA.book Page 21 Wednesday, March 28, 2012 1:35 PM
Selecting a Zone
Use the following procedure to select a zone.
Procedure:
Press the programmed Zone button and proceed to Step 3.
OR
Follow the procedure below.
Transmissions are sent and received on a channel. Depending
on your radio’s configuration, each channel may have been
programmed differently to support different groups of users or
supplied with different features. After selecting the relevant
Zone, select the relevant channel you require to transmit or
receive on.
1 c to access the menu.
2 < or > to Zone and press e to select.
3 The current zone is displayed and indicated by a 9.
4 < or > to the required zone and press e to select.
5 The display shows <Zone> Selected momentarily and
Making and Receiving Calls
A zone is a group of channels. Your radio supports up to 128
channels and 50 zones, with a maximum of 128 channels per
zone.
Selecting a Channel
returns to the selected zone screen.
Procedure:
Once the required zone is displayed (if you have multiple
zones in your radio), turn the programmed Channel Selector
Knob to select the channel.
21
English
LKP_EMEA.book Page 22 Wednesday, March 28, 2012 1:35 PM
Receiving and Responding to a Radio Call
Making and Receiving Calls
Once the channel, subscriber
ID or group ID is displayed,
you can proceed to receive
and respond to calls.
To receive a call from a group of users, your radio must be
configured as part of that group.
LED
Indicator
The LED lights up solid green
while the radio is transmitting
and blinks green when the
radio is receiving.
NOTE: The LED lights up solid green while the radio is
transmitting and double blinks green when the radio is
receiving a privacy-enabled call.
To unscramble a privacy-enabled call, your radio must
have the same Privacy Key, OR the same Key Value
and Key ID (programmed by your dealer), as the
transmitting radio (the radio you are receiving the call
from).
22
English
Receiving and Responding to a Group Call
See Privacy on page 60 for more information.
Procedure:
When you receive a Group Call (while on the Home screen):
1 The LED blinks green.
2 The Group Call icon appears in the top right corner. The first
text line shows the caller alias. The second text line displays
the group call alias. Your radio unmutes and the incoming
call sounds through the radio speaker.
3 To respond, hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
4
If the Channel Free Indication feature is enabled, you
will hear a short alert tone the moment the transmitting radio
releases the PTT button, indicating the channel is free for
you to respond.
Press the PTT button to respond to the call.
OR
If the Voice Interrupt feature is enabled, press the PTT
button to stop the current call from the transmitting radio and
free the channel for you to talk/respond.
LKP_EMEA.book Page 23 Wednesday, March 28, 2012 1:35 PM
Receiving and Responding to a Private Call
6 Wait for the Talk Permit Tone to finish (if enabled) and speak
A Private Call is a call from an individual radio to another
individual radio.
clearly into the microphone.
OR
Wait for the PTT Sidetone to finish (if enabled) and
speak clearly into the microphone.
7 Release the PTT button to listen.
8 If there is no voice activity for a predetermined period of
time, the call ends.
Procedure:
When you receive a Private Call:
1 Depending on how your radio is programmed:
The LED lights up solid yellow momentarily. Then, the LED
blinks green.
OR
The LED blinks green.
See Making a Group Call on page 26 for details on making a
Group Call.
2 The first text line shows private call icon. The second text
NOTE: If the radio receives a Group Call while not on the
Home screen, it remains on its current screen prior to
answering the call.
3 To respond, hold the radio vertically 1 to 2 inches (2.5 to 5.0
Long press the d button to go to the Home screen
to view the caller alias before replying.
line displays the private call alias. Your radio unmutes and
the incoming call sounds through the radio speaker.
cm) from your mouth.
4 If the Channel Free Indication feature is enabled, you will
Making and Receiving Calls
5 The LED lights up solid green.
hear a short alert tone the moment the transmitting radio
releases the PTT button, indicating the channel is free for
you to respond.
Press the PTT button to respond to the call.
OR
If the Voice Interrupt feature is enabled, press the PTT
button to stop the current call from the transmitting radio and
free the channel for you to talk/respond.
5 The LED lights up solid green.
23
English
LKP_EMEA.book Page 24 Wednesday, March 28, 2012 1:35 PM
6 Wait for the Talk Permit Tone to finish (if enabled) and speak
clearly into the microphone.
7 Release the PTT button to listen.
8 If there is no voice activity for a predetermined period of
time, the call ends.
Making and Receiving Calls
9 You hear a short tone. The display shows Call Ended.
See Making a Private Call on page 27 for details on making a
Private Call.
24
English
Receiving an All Call
An All Call is a call from an individual radio to every radio on the
channel. It is used to make important announcements requiring
the user’s full attention.
Procedure:
When you receive an All Call:
1 A tone sounds and the LED blinks green.
2 The Group Call icon appears in the top right corner. The first
text line shows the caller alias. The second text line displays
All Call. Your radio unmutes and the incoming call sounds
through the radio speaker.
3 Once the All Call ends, the radio returns to the previous
screen before receiving the call. An all call does not wait for
a predetermined period of time before ending.
If the Channel Free Indication feature is enabled, you
will hear a short alert tone the moment the transmitting radio
releases the PTT button, indicating the channel is now
available for use.
You cannot respond to an All Call.
See Making an All Call on page 28 for details on making an All
Call.
LKP_EMEA.book Page 25 Wednesday, March 28, 2012 1:35 PM
Receiving and Responding to a Selective Call
A Selective Call is a call from an individual radio to another
individual radio. It is a Private Call on an analog system.
Procedure:
When you receive a Selective Call:
1 The LED blinks green.
2 The Private Call icon appears in the top right corner. The
first text line shows the caller alias or Selective Call or
Alert with Call. Your radio unmutes and the incoming
call sounds through the radio's speaker.
3 To respond. hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
6 Wait for the Talk Permit Tone to finish (if enabled) and speak
clearly into the microphone.
7 Release the PTT button to listen.
8 If there is no voice activity for a predetermined period of
time, the call ends.
9 You hear a short tone. The display shows Call Ended.
NOTE: See Making a Selective Call on page 28 for details on
making a Private Call.
Making and Receiving Calls
NOTE: The radio stops receiving the All Call if you switch to a
different channel while receiving the call.
During an All Call, you will not be able to use any
programmed button functions until the call ends.
4 If the Channel Free Indication feature is enabled, you will
hear a short alert tone the moment the transmitting radio
releases the PTT button, indicating the channel is free for
you to respond.
Press the PTT button to respond to the call.
5 The LED lights up solid green.
25
English
LKP_EMEA.book Page 26 Wednesday, March 28, 2012 1:35 PM
Making a Radio Call
You can select a channel, subscriber ID, or group by using:
Making a Group Call
• The Channel Selector Knob
To make a call to a group of users, your radio must be
configured as part of that group.
• A programmed One Touch Access button
• A programmable button – This method is for Phone Calls
only.
Making and Receiving Calls
Making a Call with the Channel Selector Knob
• The Contacts list (see Contacts Settings on page 38)
NOTE: Your radio must have the Privacy feature enabled on
the channel to send a privacy-enabled transmission.
Only target radios with the same Privacy Key OR the
same Key Value and Key ID as your radio will be able
to unscramble the transmission.
26
English
See Privacy on page 60 for more information.
The One Touch Access feature allows you to make a
Group or Private Call to a predefined ID easily. This
feature can be assigned to a short or long
programmable button press.You can ONLY have one
ID assigned to a One Touch Access button. Your
radio can have multiple One Touch Access buttons
programmed.
Procedure:
1 Select the channel with the active subscriber alias or ID.
See Selecting a Channel on page 21.
OR
Press the programmed One Touch Access button.
2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
your mouth.
3 Press the PTT button to make the call. The LED lights up
solid green. The first text line shows the group call icon. The
second text line shows the group call alias,
4 Wait for the Talk Permit Tone to finish (if enabled) and speak
clearly into the microphone.
OR
Wait for the PTT Sidetone to finish (if enabled) and
speak clearly into the microphone.
5 Release the PTT button to listen.When the target radio
responds, the LED blinks green. You see the Group Call
icon, the group alias or ID, and transmitting radio alias or ID
on your display.
LKP_EMEA.book Page 27 Wednesday, March 28, 2012 1:35 PM
6
7 Radio returns to the screen you were on prior to initiating the
call.
You can also make a Group Call via Contacts (see Making a
Group Call from Contacts on page 39).
Making a Private Call
While you can receive and/or respond to a Private Call
initiated by an authorized individual radio, your radio
must be programmed for you to initiate a Private Call.
There are two types of Private Calls. The first type, where a
radio presence check is performed prior to setting up the call,
while the other sets up the call immediately.
Only one of these call types can be programmed to your
radio by your dealer.
You hear a negative indicator tone, when you make a Private
Call via the Contacts list, Call Log, One Touch Access button,
the programmed number keys, or the Channel Selector Knob,
if this feature is not enabled.
Use the Text Message or Call Alert features to contact an
individual radio. See Call Alert Operation on page 45 for more
information.
Procedure:
1 Select the channel with the active subscriber alias or ID.
See Selecting a Channel on page 21.
OR
Press the programmed One Touch Access button.
2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
your mouth.
3 Press the PTT button to make the call. The LED lights up
solid green. The first text line shows the private call icon.
The second text line displays the private call alias.
4 Wait for the Talk Permit Tone to finish (if enabled) and speak
clearly into the microphone.
5 Release the PTT button to listen. When the target radio
Making and Receiving Calls
If the Channel Free Indication feature is enabled, you
will hear a short alert tone the moment the target radio
releases the PTT button, indicating the channel is free for
you to respond. Press the PTT button to respond.
OR
If there is no voice activity for a predetermined period of
time, the call ends.
responds, the LED blinks green.
6 If the Channel Free Indication feature is enabled, you will
hear a short alert tone the moment the target radio releases
the PTT button, indicating the channel is free for you to
respond. Press the PTT button to respond.
OR
If there is no voice activity for a predetermined period of
time, the call ends.
7 You hear a short tone. The display shows Call Ended.
27
English
LKP_EMEA.book Page 28 Wednesday, March 28, 2012 1:35 PM
You can also make a Private Call via Contacts (see Making a
Private Call from Contacts on page 39).
This feature allows you to transmit to all users on the channel.
Your radio must be programmed to allow you to use this feature.
Just like a Private Call, while you can receive and/or
respond to a Selective Call initiated by an authorized
individual radio, your radio must be programmed for you
to initiate a Selective Call.
Procedure:
Procedure:
1 Select the channel with the active subscriber alias or ID.
1 Select the channel with the active subscriber alias or ID.
Making an All Call
See Selecting a Channel on page 21.
Making and Receiving Calls
Making a Selective Call
2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
your mouth.
3 Press the PTT button to make the call. The LED lights up
solid green. The first text line shows the All Call icon. The
second text line displays the All Call alias.
4 Wait for the Talk Permit Tone to finish (if enabled) and speak
clearly into the microphone.
OR
Wait for the PTT Sidetone to finish (if enabled) and
speak clearly into the microphone.
Users on the channel cannot respond to an All Call.
28
English
See Selecting a Channel on page 21.
2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
your mouth.
3 Press the PTT button to make the call. The LED lights up
solid green. The Private Call icon appears in the top right
corner. The first text line shows the subscriber alias. The
second text line displays the call status. Wait for the Talk
Permit Tone to finish (if enabled) and speak clearly into the
microphone.
OR
Wait for the PTT Sidetone to finish (if enabled) and speak
clearly into the microphone.
4 Release the PTT button to listen. When the target radio
responds, the LED blinks green.
5 If the Channel Free Indication feature is enabled, you will
hear a short alert tone the moment the target radio releases
the PTT button, indicating the channel is free for you to
respond. Press the PTT button to respond.
LKP_EMEA.book Page 29 Wednesday, March 28, 2012 1:35 PM
6 You hear a short tone. The display shows Call Ended.
Stopping a Radio Call
This feature allows you to stop an ongoing Group or Private Call
to free the channel for transmission. For example, when a radio
experiences a “stuck microphone” condition where the PTT
button is inadvertently pressed by the user.
Your radio must be programmed to allow you to use this feature.
Procedure:
While on the required channel:
1 Press the programmed Transmit Interrupt Remote Dekey
button.
2 The display shows Remote Dekey.
3 Wait for acknowledgment.
4 The radio sounds a positive indicator tone and the display
shows Remote Dekey Success, indicating that the channel
is now free.
OR
The radio sounds a negative indicator tone and the display
shows Remote Dekey Failed.
Making and Receiving Calls
OR
If there is no voice activity for a predetermined period of
time, the call ends.
On the interrupted radio, the display shows Call
Interrupted, and the radio sounds a negative indicator tone
until you release the PTT button, if it is transmitting an
interruptible call that is stopped via this feature.
29
English
LKP_EMEA.book Page 30 Wednesday, March 28, 2012 1:35 PM
Talkaround
You can continue to communicate when your repeater is not
operating, or when your radio is out of the repeater’s range but
within talking range of other radios.
Making and Receiving Calls
This is called “talkaround”.
30
The Talkaround setting is retained even after powering down
NOTE: At Step 4, you can also use < or > to change
the selected option.
Monitoring Features
NOTE: This feature is not applicable in Capacity Plus and
Linked Capacity Plus.
Monitoring a Channel
Procedure:
Press the programmed Repeater/Talkaround button to toggle
between talkaround and repeater modes.
OR
Follow the procedure below.
NOTE: This feature is not applicable in Capacity Plus and
Linked Capacity Plus.
1 c to access the menu.
2 < or > to Utilities and press e to select.
3 < or > to Radio Settings and press e to select.
4 Press e to enable Talkaround. The display shows 9
beside Enabled.
OR
Press e to disable Talkaround. The 9 disappears from
beside Enabled.
5 The screen automatically returns to the previous menu.
English
Use the Monitor feature to make sure a channel is clear before
transmitting.
Procedure:
1 Press and hold the programmed Monitor button and listen
for activity.
2 The Monitor icon appears on the status bar and the LED
lights up solid yellow.
3 You hear radio activity or total silence, depending on how
your radio is programmed.
4 When you hear “white noise” (that is, the channel is free),
press the PTT button to talk and release it to listen.
LKP_EMEA.book Page 31 Wednesday, March 28, 2012 1:35 PM
Permanent Monitor
NOTE: This feature is not applicable in Capacity Plus and
Linked Capacity Plus.
Procedure:
1 Press the programmed Permanent Monitor button.
2 Radio sounds an alert tone, the LED lights up solid yellow,
and the display shows Permanent Monitor On. The
Monitor icon appears on the status bar.
3 Press the programmed Permanent Monitor button to exit
Permanent Monitor mode.
4 Radio sounds an alert tone, the LED turns off, and display
shows Permanent Monitor Off.
NOTE:Radio users who switch from analog to digital channels
often assume that the lack of static on a digital channel is an
indication that the radio is not working properly. This is not the
case. Digital technology quiets the transmission by removing
the noise from the signal and allowing only the clear voice or
data information to be heard.
Making and Receiving Calls
Use the Permanent Monitor feature to continuously monitor a
selected channel for activity.
31
English
LKP_EMEA.book Page 32 Wednesday, March 28, 2012 1:35 PM
Radio Check
Advanced Features
Advanced Features
Use the navigation guide to learn more about advanced
features available with your radio:
Radio Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 32
Scan Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 33
Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 35
Vote Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 38
Contacts Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 38
Call Indicator Settings . . . . . . . . . . . . . . . . . . . . . . . . . page 41
Call Log Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 43
Call Alert Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . page 45
Emergency Operation . . . . . . . . . . . . . . . . . . . . . . . . . page 46
Text Message Features. . . . . . . . . . . . . . . . . . . . . . . . page 52
Analog Status Update . . . . . . . . . . . . . . . . . . . . . . . . . page 59
Privacy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dual Tone Multi Frequency (DTMF) . . . . . . . . . . . . . .
Multi-Site Controls. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Lone Worker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Password Lock Features. . . . . . . . . . . . . . . . . . . . . . .
Notification List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Utilities. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Front Panel Programming (FPP). . . . . . . . . . . . . . . . .
32
English
page 60
page 61
page 61
page 64
page 66
page 66
page 68
page 69
page 79
If enabled, this feature allows you to determine if another radio
is active in a system without disturbing the user of that radio. No
audible or visual notification is shown on the target radio.
This feature is only applicable for subscriber aliases or IDs.
Sending a Radio Check
Procedure:
Use the programmed Radio Check button.
1 Press the programmed Radio Check button.
2 < or > to the required subscriber alias or ID and
press e to select.
3 The display shows transitional mini notice, indicating the
request is in progress. The LED lights up solid green.
4 Wait for acknowledgement.
5 If successful, a positive indicator tone sounds and the
display shows positive mini notice.
OR
If unsuccessful, a negative indicator tone sounds and the
display shows negative mini notice.
6 Radio returns to the subscriber alias or ID screen.
OR
LKP_EMEA.book Page 33 Wednesday, March 28, 2012 1:35 PM
Procedure:
Use the menu.
2 < or > to Contacts and press e to select.
3 < or > to the required subscriber alias or ID and
press e to select.
4 < or > to Radio Check and press e to select.
5 The display shows transitional mini notice, indicating the
request is in progress. The LED lights up solid green.
6 Wait for acknowledgement.
7 If successful, a positive indicator tone sounds and the
display shows positive mini notice.
OR
If unsuccessful, a negative indicator tone sounds and the
display shows negative mini notice.
Scan lists are created and assigned to individual channels/
groups. Your radio scans for voice activity by cycling through
the channel/group sequence specified in the scan list for the
current channel/group.
Your radio can support up to 250 scan lists, with a maximum of
16 members in a list. Each scan list supports a mixture of both
analog and digital entries.
You can add, delete, or prioritize channels by editing a scan list.
You can attach a new scan list to your radio via Front Panel
Programming.
Advanced Features
1 c to access the menu.
Scan Lists
NOTE: This feature is not applicable in Capacity Plus and
Linked Capacity Plus.
Viewing an Entry in the Scan List
Procedure:
8 Radio returns to the subscriber alias or ID screen.
1 c to access the menu.
If the d button is pressed when the radio is waiting for
acknowledgement, a tone sounds, and the radio terminates all
retries and exits Radio Check mode.
2 < or > to Scan and press e to select.
3 < or > to Scan List and press e to select.
4 Use < or > to view each member on the list.
The priority icon appears left of the member’s alias, if set, to
indicate whether the member is on a Priority 1 or Priority 2
33
English
LKP_EMEA.book Page 34 Wednesday, March 28, 2012 1:35 PM
channel list. You cannot have multiple Priority 1 or Priority 2
channels in a scan list.
< or > to No and press e to select to save the
current list.
There is no priority icon if priority is set to None.
Editing the Scan List
Procedure:
Adding a New Entry to the Scan List
1 c to access the menu.
Procedure:
2 < or > to Scan and press e to select.
1 c to access the menu.
2 < or > to Scan and press e to select.
3 < or > to Scan List and press e to select.
Advanced Features
Deleting an Entry from the Scan List
4 < or > to Add Member and press e to select.
5 < or > to the required alias or ID.
6 < or > to the required priority level and press e to
select.
7 The display shows positive mini notice, followed
immediately by Add Another?.
8 < or > to Yes and press e to select, to add another
entry, and repeat Steps 5 to 8.
OR
34
English
3 < or > to Scan List and press e to select.
4 < or > to the required alias or ID.
5 Press e to select.
6 < or > to Delete and press e to select.
7 At Delete Entry?, < or > to Yes and press e to
select, to delete the entry. The display shows positive mini
notice.
OR
< or > to No and press e to select to return to the
previous screen.
8 Repeat Steps 4 to 9 to delete other entries.
After deleting all required aliases or IDs, long press d to
return to the Home screen.
LKP_EMEA.book Page 35 Wednesday, March 28, 2012 1:35 PM
Setting and Editing Priority for an Entry in the Scan
Scan
List
1 c to access the menu.
2 < or > to Scan and press e to select.
3 < or > to Scan List and press e to select.
When you start a scan, your radio cycles through the
programmed scan list for the current channel looking for voice
activity.
The LED blinks yellow and the scan icon appears on the status
bar.
5 Press c to select.
During a dual mode scan, if you are on a digital channel, and
your radio locks onto an analog channel, it automatically
switches from digital mode to analog mode for the duration of
the call. This is also true for the reverse.
6 < or > to Edit Priority and press e to select.
There are two ways of initiating scan:
7 < or > to the required priority level and press e to
• Main Channel Scan (Manual): Your radio scans all the
4 < or > to the required alias or ID.
select.
8 The display shows positive mini notice before returning to
the previous screen.
9 The priority icon appears left of the member’s name.
There is no priority icon if priority is set to None.
Advanced Features
Procedure:
channels/groups in your scan list. On entering scan, your
radio may – depending on the settings – automatically start
on the last scanned “active” channel/group or on the channel
where scan was initiated.
• Auto Scan (Automatic): Your radio automatically starts
scanning when you select a channel/group that has Auto
Scan enabled.
NOTE: This feature is not applicable in Capacity Plus and
Linked Capacity Plus.
35
English
LKP_EMEA.book Page 36 Wednesday, March 28, 2012 1:35 PM
Starting and Stopping Scan
Responding to a Transmission During a Scan
Procedure:
Press the programmed Scan button to start or stop Scan.
OR
Follow the procedure below.
During scanning, your radio stops on a channel/group where
activity is detected. The radio stays on that channel for a
programmed time period known as “hang time”.
1 Use the Channel Selector Knob to select a channel
programmed with a scan list.
2 c to access the menu.
3 < or > to Scan and press e to select.
Advanced Features
4 < or > to Scan State and press e to select.
5 < or > to required scan state and press e to select.
6 The display shows Scan On when scan is enabled. The LED
blinks yellow and the scan icon appears.
OR
The display shows Scan Off if scan is disabled. The LED
turns off and the scan icon disappears.
While scanning, the radio will only accept data (e.g. text
messagelocation, or PC data) if received on its Selected
Channel.
36
English
Procedure:
1 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
your mouth.
If the Channel Free Indication feature is enabled, you
will hear a short alert tone the moment the transmitting radio
releases the PTT button, indicating the channel is free for
you to respond.
2 Press the PTT button during hang time. The LED lights up
solid green.
3 Wait for the Talk Permit Tone to finish (if enabled) and
speak clearly into the microphone.
OR
Wait for the PTT Sidetone to finish (if enabled) and
speak clearly into the microphone.
4 Release the PTT button to listen.
5 If you do not respond within the hang time, the radio returns
to scanning other channels/groups.
LKP_EMEA.book Page 37 Wednesday, March 28, 2012 1:35 PM
Restoring a Nuisance Channel
If a channel continually generates unwanted calls or noise
(termed a “nuisance” channel), you can temporarily remove the
unwanted channel from the scan list.
Procedure:
To restore the deleted nuisance channel, do one of the
following:
This capability does not apply to the channel designated as the
Selected Channel.
• Turn the radio off and then power it on again, OR
Procedure:
1 When your radio “locks on to” an unwanted or nuisance
channel, press the programmed Nuisance Channel Delete
button until you hear a tone.
2 Release the Nuisance Channel Delete button. The
nuisance channel is deleted.
• Stop and restart a scan via the programmed Scan button or
menu, OR
• Change the channel via the Channel Selector Knob.
Advanced Features
Deleting a Nuisance Channel
Deleting a “nuisance” channel is only possible through the
programmed Nuisance Channel Delete button. This feature is
not accessible through the menu.
37
English
LKP_EMEA.book Page 38 Wednesday, March 28, 2012 1:35 PM
Vote Scan
Vote Scan provides you with wide area coverage in areas
where there are multiple base stations transmitting identical
information on different analog channels.
Contacts provides “address-book” capabilities on your radio.
Each entry corresponds to an alias or ID that you use to initiate
a call.
Your radio scans analog channels of multiple base stations and
performs a voting process to select the strongest received
signal. Once that is established, your radio unmutes to
transmissions from that base station.
Each entry, depending on context, associates with one of five
types of calls: Group Call, Private Call, All Call, PC Call or
Dispatch Call.
The LED blinks yellow and the vote scan icon appears on the
status bar.
Advanced Features
Contacts Settings
To respond to a transmission during a Vote Scan, follow the
same procedures as Responding to a Transmission During a
Scan on page 36.
38
English
PC Call and Dispatch Call are data-related. They are only
available with the applications. Refer to the data applications
documentation for more information.
NOTE: If the Privacy feature is enabled on a channel, you
can make privacy-enabled Group Call, Private Call,
and All Call on that channel. Only target radios with
the same Privacy Key OR the same Key Value and
Key ID as your radio will be able to unscramble the
transmission.
See Privacy on page 60 for more information.
Your radio supports two Contacts lists, one for Analog contacts
and one for Digital contacts, with a maximum of 500 members
for each Contacts list.
Each entry within Contacts displays the following information:
• Call Type
• Call Alias
• Call ID
LKP_EMEA.book Page 39 Wednesday, March 28, 2012 1:35 PM
For the Analog Contacts list, you can only view the
subscriber IDs, edit the subscriber IDs, and initiate a
Call Alert. Adding and deleting capabilities can only be
performed by your dealer.
Making a Group Call from Contacts
Procedure:
7 Release the PTT button to listen. When any user in the
group responds, the LED blinks green. You see the Group
Call icon, the group ID, and that user’s ID on your display.
8
If the Channel Free Indication feature is enabled, you
will hear a short alert tone the moment the target radio
releases the PTT button, indicating the channel is free for
you to respond. Press the PTT button to respond.
OR
If there is no voice activity for a programmed period of time,
the call ends.
1 c to access the menu.
Making a Private Call from Contacts
2 < or > to Contacts and press e to select.The
Procedure:
entries are alphabetically sorted.
3 < or > to the required group alias or ID.
4 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
your mouth.
5 Press the PTT button to make the call. The LED lights up
solid green.
6 Wait for the Talk Permit Tone to finish (if enabled) and
speak clearly into the microphone.
OR
Wait for the PTT Sidetone to finish (if enabled) and
speak clearly into the microphone.
Advanced Features
NOTE: You can add, or edit subscriber IDs for the Digital
Contacts list. Deleting subscriber IDs can only be
performed by your dealer.
1 c to access the menu.
2 < or > to Contacts and press e to select.The
entries are alphabetically sorted.
3 < or > to the required subscriber alias or ID.
4 Press e to select.
5 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
your mouth.
6 Press the PTT button to make the call. The LED lights up
solid green. The display shows the destination alias.
39
English
LKP_EMEA.book Page 40 Wednesday, March 28, 2012 1:35 PM
7 Wait for the Talk Permit Tone to finish (if enabled) and
speak clearly into the microphone.
8 Release the PTT button to listen. When the target radio
responds, the LED blinks green and the display shows the
transmitting user's ID.
9 If the Channel Free Indication feature is enabled, you will
hear a short alert tone the moment the target radio releases
the PTT button, indicating the channel is free for you to
respond. Press the PTT button to respond.
OR
If there is no voice activity for a programmed period of time,
the call ends.
Advanced Features
10 You hear a short tone. The display shows Call Ended.
40
English
Setting Default Contact
Procedure:
Follow the procedure below.
1 c to access the menu.
2 < or > to Contacts and press e to select.
3 < or > to the required alias or ID and press e to
select.
4 < or > to Set as Default and press e to select.
5 The radio sounds a positive indicator tone and the display
shows positive mini notice.
6 A 9 appears beside the selected default alias or ID.
LKP_EMEA.book Page 41 Wednesday, March 28, 2012 1:35 PM
Call Indicator Settings
Activating and Deactivating Call Ringers for
Private Calls
Alert
You can turn on or off the ringing tones for a received Private
Call.
You can select, or turn on or off ringing tones for a received Call
Alert.
Procedure:
Procedure:
2 < or > to Utilities and press e to select.
1 c to access the menu.
2 < or > to Utilities and press e to select.
3 < or > to Radio Settings and press e to select.
4 < or > to Tones/Alerts and press e to select.
5 < or > to Call Ringers and press e to select.
6 < or > to Call Alert and press e to select. The
current tone is indicated by a 9.
7 < or > to the required tone and press e to select. 9
appears beside selected tone.
NOTE: At Step 6, you can also use < or > to change the
selected option.
1 c to access the menu.
3 < or > to Radio Settings and press e to select.
4 < or > to Tones/Alerts and press e to select.
5 < or > to Call Ringers and press e to select.
Advanced Features
Activating and Deactivating Call Ringers for Call
6 < or > to Private Call.
7 Press e to enable Private Call ringing tones. The display
shows 9 beside Enabled.
OR
Press e to disable Private Call ringing tones. The 9
disappears from beside Enabled.
NOTE: At Step 6, you can also use < or > to change the
selected option.
41
English
LKP_EMEA.book Page 42 Wednesday, March 28, 2012 1:35 PM
Activating and Deactivating Call Ringers for
Selective Call
You can select, or turn on or off ringing tones for a received
Selective Call.
You can program your radio to sound one of ten predefined
ringing tones when receiving a Call Alert or a Text Messagefrom
a particular contact.
Procedure:
Procedure:
1 c to access the menu.
1 c to access the menu.
2 < or > to Utilities and press e to select.
2 < or > to Contacts and press e to select.The
3 < or > to Radio Settings and press e to select.
4 < or > to Tones/Alerts and press e to select.
Advanced Features
Assigning Ring Styles
entries are alphabetically sorted.
3 < or > to the required alias or ID and press e to
select.
5 < or > to Call Ringers and press e to select.
4 < or > to Edit and press e to select.
6 < or > to Selective Call and press e to select.
5 Press c until display shows Edit Ringtone menu.
The current tone is indicated by a 9.
7 < or > to the required tone and press e to select. 9
appears beside selected tone.
NOTE: At Step 6, you can also use < or > to change the
42
English
selected option.
6 A 9 indicates the current selected tone.
7 < or > to the required tone and press e to select. 9
appears beside selected tone.
8 The display shows a positive mini notice.
The radio sounds out each ring style as you navigate through
the list.
LKP_EMEA.book Page 43 Wednesday, March 28, 2012 1:35 PM
Escalating Alarm Tone Volume
Call Log Features
Your radio keeps track of all recent outgoing, answered, and
missed Private Calls. Use the call log feature to view and
manage recent calls.
Procedure:
You can perform the following tasks in each of your call lists:
1 c to access the menu.
• Delete
2 < or > to Utilities and press e to select.
• View Details
3 < or > to Radio Settings and press e to select.
Viewing Recent Calls
4 < or > to Tones/Alerts and press e to select.
The lists are Missed, Answered, and Outgoing.
5 < or > to Escalert.
6 Press e to enable Escalert. The display shows 9 beside
Enabled.
OR
Press e to disable Escalert. The 9 disappears from beside
Enabled.
NOTE: At Step 5, you can also use < or > to change the
selected option.
Procedure:
Advanced Features
You can program your radio to continually alert you when a
radio call remains unanswered. This is done by automatically
increasing the alarm tone volume over time. This feature is
known as Escalert.
1 c to access the menu.
2 < or > to Call Log and press e to select.
3 < or > to required list and press e to select.
4 The display shows the most recent entry at the top of the
list.
5 < or > to view the list.
Press the PTT button to start a Private Call with the current
selected alias or ID.
43
English
LKP_EMEA.book Page 44 Wednesday, March 28, 2012 1:35 PM
Deleting a Call from a Call List
Viewing Details from a Call List
Procedure:
Procedure:
1 c to access the menu.
1 c to access the menu.
2 < or > to Call Log and press e to select.
2 < or > to Call Log and press e to select.
3 < or > to the required list and press e to select.
3 < or > to the required list and press e to select.
4 < or > to the required alias or ID and press e to
4 < or > to the required alias or ID and press e to
select.
5 < or > to Delete and press e to select.
Advanced Features
6 Press e to select Yes to delete the entry. The display
shows positive mini notice.
OR
< or > to No to return to the previous screen.
When you select a call list and it contains no entries, the display
shows List Empty,.
44
English
select.
5 < or > to View Details and press e to select.
Display shows details.
LKP_EMEA.book Page 45 Wednesday, March 28, 2012 1:35 PM
Call Alert Operation
This feature is applicable for subscriber aliases or IDs only and
is accessible through the menu via Contacts.
Receiving and Responding to a Call Alert
When you receive a Call Alert page, you see the notification list
listing a Call Alert with the alias or ID of the calling radio on the
display.
Procedure:
1 You hear a repetitive tone. The LED blinks yellow.
2 Press the PTT button while the display still shows the Call
Alert in the Notification List to respond with a Private Call.
OR
Press d to exit the Notification List. The alert is moved to
the Missed Call Log.
Procedure:
1 c to access the menu.
2 < or > to Contacts and press e to select.
3 < or > to the required subscriber alias or ID and
press e to select.
4 < or > to Call Alert and press e to select.
5 The display shows Call Alert and the subscriber alias or
ID, indicating that the Call Alert has been sent.
6 The LED lights up solid green when your radio is sending
Advanced Features
Call Alert paging enables you to alert a specific radio user to call
you back when they are able to do so.
Making a Call Alert from the Contacts List
the Call Alert.
7 If the Call Alert acknowledgement is received, the display
shows positive mini notice.
OR
If the Call Alert acknowledgement is not received, the
display shows negative mini notice.
See Notification List on page 68 for details about the
Notification List.
See Call Log Features on page 43 for details about the Missed
Call List.
45
English
LKP_EMEA.book Page 46 Wednesday, March 28, 2012 1:35 PM
Making a Call Alert with the One Touch Access
Emergency Operation
Button
Procedure:
1 Press the programmed One Touch Access button to make
a Call Alert to the predefined alias or ID.
2 The display shows Call Alert and the subscriber alias or
ID, indicating that the Call Alert has been sent.
3 The LED lights up solid green when your radio is sending
the Call Alert.
Advanced Features
4 If the Call Alert acknowledgement is received, the display
shows positive mini notice.
OR
If the Call Alert acknowledgement is not received, the
display shows negative mini notice.
46
English
An Emergency Alarm is used to indicate a critical situation. You
are able to initiate an Emergency at any time on any screen
display even when there is activity on the current channel.
Your dealer can set the duration of a button press for the
programmed Emergency button, except for long press, which is
similar with all other buttons:
• Short press – Between 0.05 seconds and 0.75 seconds
• Long press – Between 1.00 second and 3.75 seconds
The programmed Emergency button is assigned with the
Emergency On/Off feature. Check with your dealer for the
assigned operation of the Emergency button.
If short press the programmed Emergency button is assigned
to turn on the Emergency mode, then long press the
programmed Emergency button is assigned to exit the
Emergency mode.
If long press the programmed Emergency button is assigned to
turn on the Emergency mode, then short press the programmed
Emergency button is assigned to exit the Emergency mode.
NOTE: Side Button 1 or Side Button 2 can be programmed as
the Emergency Button.
Your radio supports three Emergency Alarms:
• Emergency Alarm
• Emergency Alarm with Call
LKP_EMEA.book Page 47 Wednesday, March 28, 2012 1:35 PM
Sending an Emergency Alarm
In addition, each alarm has the following types:
This feature allows you to send an Emergency Alarm, a
non-voice signal, which triggers an alert indication on a group of
radios.
• Regular – Radio transmits an alarm signal and shows audio
and/or visual indicators.
• Silent – Radio transmits an alarm signal without any audio or
visual indicators. Radio receives calls without any sound
through the radio’s speaker, until you press the PTT button to
initiate the call.
• Silent with Voice – Radio transmits an alarm signal without
any audio or visual indicators, but allow incoming calls to
sound through the radio’s speaker.
Only ONE of the Emergency Alarms above can be assigned to
the programmed Emergency button.
Procedure:
1 Press the programmed Emergency On button.
2 The display shows Tx Alarm and the destination alias. The
LED lights up solid green and the Emergency icon appears.
OR
The display shows Tx Telegram and the destination
alias. The LED lights up solid green and the Emergency icon
appears.
Advanced Features
• Emergency Alarm with Voice to Follow
3 When an Emergency Alarm acknowledgment is received,
the Emergency tone sounds and the LED blinks green. The
display shows Alarm Sent.
OR
If your radio does not receive an Emergency Alarm
acknowledgement, and after all retries have been
exhausted, a tone sounds and the display shows
Alarm Failed.
4 Radio exits the Emergency Alarm mode and returns to the
Home screen.
If your radio is set to Silent, it will not display any audio or visual
indicators during Emergency mode.
47
English
LKP_EMEA.book Page 48 Wednesday, March 28, 2012 1:35 PM
Sending an Emergency Alarm with Call
This feature allows you to send an Emergency Alarm to a group
of radios. Upon acknowledgement by a radio within the group,
the group of radios can communicate over a programmed
Emergency channel.
Procedure:
1 Press the programmed Emergency On button.
2 The display shows Tx Alarm and the destination alias. The
Advanced Features
LED lights up solid green and the Emergency icon appears.
OR
The display shows Tx Telegram and the destination
alias. The LED lights up solid green and the Emergency icon
appears.
3 When an Emergency Alarm acknowledgment is received,
the Emergency tone sounds and the LED blinks green. The
display shows Alarm Sent.
4 Your radio enters the emergency call mode when the
display shows Emergency and the destination group alias.
5 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
your mouth.
6 Press PTT button to make the call. The LED lights up solid
green and the group icon appears on the display.
48
English
7 Wait for the Talk Permit Tone to finish (if enabled) and
speak clearly into the microphone.
OR
Wait for the PTT Sidetone to finish (if enabled) and
speak clearly into the microphone.
8 Release the PTT button to listen.
When you receive a group call, the display shows the caller
alias and group alias.
9 When the channel is free for you to respond, a short alert
tone sounds (
if the Channel Free Indication feature is
enabled). Press the PTT button to respond.
OR
Once your call ends, press the programmed Emergency
Off button to exit the Emergency mode.
10 The radio returns to the Home screen.
If your radio is set to Silent, it will not display any audio or visual
indicators during Emergency mode, or allow any received calls
to sound through the radio’s speaker, until you press the PTT
button to initiate the call.
If your radio is set to Silent with Voice, it will not display any
audio or visual indicators during Emergency mode, but allow
incoming calls to sound through the radio’s speaker. The
indicators will only appear once you press the PTT button to
initiate, or respond to, the call.
LKP_EMEA.book Page 49 Wednesday, March 28, 2012 1:35 PM
Sending an Emergency Alarm with Voice to
Follow
This activated microphone state is also known as “hot mic”.
If your radio has Emergency Cycle Mode enabled, repetitions of
hot mic and receiving period are made for a programmed
duration.
NOTE: During Emergency Cycle Mode, received calls sound
through the radio’s speaker.
If you press the PTT button during the or programmed receiving
period, you will hear a prohibit tone, indicating that you should
release the PTT button. The radio ignores the PTT press and
remains in Emergency mode.
NOTE: If you press the PTT button during hot mic, and
continue to press it after the hot mic duration expires,
the radio continues to transmit until you release the
PTT button.
1 Press the programmed Emergency On button.
2 The display shows Tx Alarm and the destination alias. The
LED lights up solid green and the Emergency icon appears.
OR
The display shows Tx Telegram and the destination
alias. The LED lights up solid green and the Emergency icon
appears.
3 Once the display shows Alarm Sent, speak clearly into the
microphone. When hot mic has been enabled, the radio
automatically transmits without a PTT press until the hot mic
duration expires.
While transmitting, the LED lights up solid green and the
Emergency icon appears.
Advanced Features
This feature allows you to send an Emergency Alarm to a group
of radios. Your radio’s microphone is automatically activated,
allowing you to communicate with the group of radios without
pressing the PTT button.
Procedure:
4 The radio automatically stops transmitting when:
Once the cycling duration between hot mic and receiving
calls expires, if Emergency Cycle Mode is enabled.
OR
Once the hot mic duration expires, if Emergency Cycle
Mode is disabled.
5 To transmit again, press the PTT button.
OR
Press the programmed Emergency Off button to exit the
Emergency mode.
6 The radio returns to the Home screen.
49
English
LKP_EMEA.book Page 50 Wednesday, March 28, 2012 1:35 PM
If your radio is set to Silent, it will not display any audio or
visual indicators during Emergency mode, or allow any
received calls to sound through the radio’s speaker, until the
programmed hot mic transmission period is over, and you
press the PTT button.
Advanced Features
If your radio is set to Silent with Voice, it will not display any
audio or visual indicators during Emergency mode when you
are making the call with hot mic, but allow sound through the
radio’s speaker when the target radio responds after the
programmed hot mic transmission period is over. The
indicators will only appear when you press the PTT button.
NOTE: If the Emergency Alarm request fails, the radio does
not retry to send the request, and enters the hot mic
state directly.
50
English
Reinitiating an Emergency Mode
NOTE: This feature is only applicable to the radio sending the
Emergency Alarm.
There are two instances where this can happen:
• You change the channel while the radio is in Emergency
mode. This exits the Emergency mode. If Emergency Alarm
is enabled on this new channel, the radio reinitiates
Emergency.
• You press the programmed Emergency On button during an
Emergency initiation/transmission state. This causes the
radio to exit this state, and to reinitiate Emergency.
LKP_EMEA.book Page 51 Wednesday, March 28, 2012 1:35 PM
Exiting Emergency Mode
Your radio exits Emergency mode when one of the following
occurs:
• Emergency Alarm acknowledgement is received (for
Emergency Alarm only), OR
•
An Emergency Exit Telegram is received, OR
• All retries to send the alarm have been exhausted, OR
• The Emergency Off button is pressed.
Advanced Features
NOTE: This feature is only applicable to the radio sending the
Emergency Alarm.
NOTE: If your radio is powered off, it exits the Emergency
mode. The radio will not reinitiate the Emergency mode
automatically when it is turned on again.
If you change channels when your radio is in
Emergency mode to a channel that has no emergency
system configured, No Emergency is shown on your
display.
51
English
LKP_EMEA.book Page 52 Wednesday, March 28, 2012 1:35 PM
Text Message Features
Your radio is able to receive data, for example a text message,
from another radio or an e-mail application.
The maximum length of characters for a text message,
including the subject line (seen when receiving message from
an e-mail application), is 140 for sending and receiving.
The radio exist the current screen once the inactivity timer
expires. Any text message in the writing/editing screen is
automatically saved to the Drafts folder.
NOTE: Long press d at any time to return to the Home
screen.
Sending a Quick Text Message
Procedure:
1 < or > to Message and press e to select.
2 < or > to Quick Text and press e to select.
3 < or > to the required message. Press e to send.
4 The display shows transitional mini notice, confirming your
message is being sent.
5 If the message is sent, a tone sounds and the display shows
52
positive mini notice.
OR
English
If the message is not sent, a low tone sounds and the
display shows negative mini notice.
If the text message fails to send, the radio returns you to the
Resend option screen (see Managing Fail-to-Send Text
Messages on page 53).
Sending a Quick Text Message with the One
Touch Access Button
Procedure:
1 Press the programmed One Touch Access button to send
a predefined Quick Text message to a predefined alias or
ID.
2 The display shows transitional mini notice, confirming your
message is being sent.
3 If the message is sent, a tone sounds and the display shows
the positive mini notice.
OR
If the message is not sent, a low tone sounds and the
display shows negative mini notice.
If the text message fails to send, the radio returns you to the
Resend option screen (see Managing Fail-to-Send Text
Messages on page 53)
LKP_EMEA.book Page 53 Wednesday, March 28, 2012 1:35 PM
Managing Fail-to-Send Text Messages
Forwarding a Text Message
You can select one of the following options while at the Resend
option screen:
Select Forward to send the message to another subscriber/
group alias or ID.
• Resend
Procedure:
• Forward
1 < or > to Forward and press e to select.
• Edit
2 < or > to the required alias or ID and press e to
select.
NOTE: If the channel type (i.e. conventional digital) is not a
match, you can only edit and forward a Fail-to-Send
message.
3 The display shows transitional mini notice, confirming your
Resending a Text Message
4 If the message is sent, a tone sounds and the display shows
Procedure:
1 Press e to resend the same message to send to the same
subscriber/group alias or ID.
2 If the message is sent, a tone sounds and the display shows
positive mini notice.
OR
If the message is not sent, a low tone sounds and the
display shows negative mini notice.
message is being sent.
positive mini notice.
OR
If the message is not sent, a low tone sounds and the
display shows negative mini notice.
Managing Sent Text Messages
Once a message is sent to another radio, it is saved in Sent
Items. The most recent sent text message is always added to
the top of the Sent Items list.
The Sent Items folder is capable of storing a maximum of
thirty (30) last sent messages. When the folder is full, the next
sent text message automatically replaces the oldest text
message in the folder.
53
English
LKP_EMEA.book Page 54 Wednesday, March 28, 2012 1:35 PM
NOTE: Long press d at any time to return to the Home
screen.
• Forward
Viewing a Sent Text Message
If the channel type (i.e. conventional digital) is not a match, you
can only edit, forward, or delete a Sent message.Procedure:
Procedure:
Press the programmed Text Message button and proceed to
Step 3.
OR
Follow the procedure below.
1 c to access the menu.
2 < or > to Messages and press e to select.
3 < or > to Sent Items and press e to select.
4 < or > to the required message and press e to
select.
A subject line may be shown if the message is from an
e-mail application.
The icon beside each message indicates the status of the
message (see Sent Item Icons on page 18).
Sending a Sent Text Message
You can select one of the following options while viewing a sent
text message:
• Resend
54
English
• Delete
1 Press c again while viewing the message.
2 < or > to Resend and press e to select.
3 The display shows transitional mini notice, confirming that
the same message is being sent to the same target radio.
4 If the message is sent, a tone sounds and the display shows
positive mini notice.
OR
If the message is not sent, a low tone sounds and the
display shows negative mini notice.
If the message fails to send, the radio returns you to the Resend
option screen. Press e to resend the message to the same
subscriber/group alias or ID.
NOTE: Changing the volume, and pressing any button, except
for e, <, or >, returns you to the message.
The radio exits the Resend option screen if you press
the PTT button to initiate a Private or Group Call, or to
respond to a Group Call. The radio also exits the
screen when it receives a text or telemetry message,
an emergency call or alarm, or a call alert.
LKP_EMEA.book Page 55 Wednesday, March 28, 2012 1:35 PM
The display returns to the Resend option screen if you
press the PTT button to respond to a Private Call
(except when the radio is displaying the Missed Call
screen), and at the end of an All Call.
Deleting All Sent Text Messages from Sent Items
Press < or > to access the Forward, or Delete option
screen:
Procedure:
Press the programmed Text Message button and proceed to
Step 3.
OR
Follow the procedure below.
• Select Forward to send the selected text message to another
1 c to access the menu.
subscriber/group alias or ID (see Forwarding a Text
Message on page 53).
2 < or > to Messages and press e to select.
• Select Delete to delete the text message.
3 < or > to Sent Items and press e to select.
NOTE: If you exit the message sending screen while the
message is being sent, the radio updates the status of
the message in the Sent Items folder without providing
any indication in the display or via sound.
4 < or > to Delete All and press e to select.
If the radio changes mode or powers down before the
status of the message in Sent Items is updated, the
radio cannot complete any In-Progress messages and
automatically marks it with a Send Failed icon.
The radio supports a maximum of five (5) In-Progress
messages at one time. During this period, the radio cannot send
any new message and automatically marks it with a Send Failed
icon.
5 < or > to Yes and press e to select. The display
shows positive mini notice
OR
< or > to No and press e to return to the previous
screen.
When you select Sent Items and it contains no text messages,
the display shows List Empty.
55
English
LKP_EMEA.book Page 56 Wednesday, March 28, 2012 1:35 PM
Receiving a Text Message
When your radio receives a message, the display shows the
Notification List with the alias or ID of the sender and the
message icon.
You can select one of the following options when receiving a
text message:
• Read
• Select Read Later to return to the screen you were on prior
to receiving the text message.
• Select Delete to delete the text message.
Managing Received Text Messages
• Read Later
Use the Inbox to manage your text messages. The Inbox is
capable of storing a maximum of 30 messages.
• Delete
Your radio supports the following options for text messages:
NOTE: The radio exits the Text Message alert screen and sets
up a Private or Group Call to the sender of the
message if the PTT button is pressed when the radio is
displaying the alert screen.
• Forward
Reading a Text Message
NOTE: If the channel type (i.e. conventional digital) is not a
match, you can only forward, delete, or delete all
Received messages.
Procedure:
1 < or > to Read? and press e to select.
2 Selected message in the Inbox opens.
A subject line may be shown if the message is from an
e-mail application.
3 Press d to return to the Inbox.
OR
56
Press < or > to access the Read Later or Delete option
screen:
Press e to reply, forward, or delete the text message.
English
• Delete
• Delete All
Text messages in the Inbox are sorted according to the most
recently received.
NOTE: Long press d at any time to return to the Home
screen.
LKP_EMEA.book Page 57 Wednesday, March 28, 2012 1:35 PM
Viewing a Text Message from the Inbox
3 < or > to Inbox and press e to select.
Procedure:
4 < or > to the required message and press e to
1 c to access the menu.
2 < or > to Messages and press e to select.
select.
A subject line may be shown if the message is from an
e-mail application.
3 < or > to Inbox and press e to select.
5 Press e once more to access the sub-menu.
4 < or > to view the messages.
6 < or > to Delete and press e to select.
A subject line may be shown if the message is from an
e-mail application.
5 Press e to select the current message, and press e
again to reply, forward, or delete that message.
OR
Long press d to return to the Home screen.
Deleting a Text Message from the Inbox
Procedure:
Press the programmed Text Message button and proceed to
Step 3.
OR
Follow the procedure below.
1 c to access the menu.
2 < or > to Messages and press e to select.
7 < or > to Yes and press e to select.
8 The display shows positive mini notice.
9 The screen returns to the Inbox.
Deleting All Text Messages from the Inbox
Procedure:
Press the programmed Text Message button and proceed to
Step 3.
OR
Follow the procedure below.
1 c to access the menu.
2 < or > to Messages and press e to select.
3 < or > to Inbox and press e to select.
4 < or > to Delete All and press e to select.
57
English
LKP_EMEA.book Page 58 Wednesday, March 28, 2012 1:35 PM
5 < or > to Yes and press e to select.
Sending 5-Tone Message Encode to Contact
6 The display shows positive mini notice.
Procedure:
When you select the Inbox and it contains no text messages,
the display shows List Empty
2 < or > to Quick Text and press e to select.
Analog Message Encode
1 < or > to Message and press e to select.
3 < or > to the required message. Press e to select.
4 < or > to the required contact. Press e to select.
Your radio is able to send preprogrammed messages from the
Message list to a radio alias or to the dispatcher.
5 The display shows transitional mini notice, confirming your
Sending MDC Message Encode to Dispatcher
6 If the message is sent, a tone sounds and the display shows
Procedure:
1 < or > to Message and press e to select.
2 < or > to Quick Text and press e to select.
3 < or > to the required message. Press e to send.
4 The display shows transitional mini notice, confirming your
message is being sent.
5 If the message is sent, a tone sounds and the display shows
positive mini notice.
OR
If the message is not sent, a low tone sounds and the
display shows negative mini notice.
58
English
message is being sent.
positive mini notice.
OR
If the message is not sent, a low tone sounds and the
display shows negative mini notice.
LKP_EMEA.book Page 59 Wednesday, March 28, 2012 1:35 PM
Analog Status Update
For 5-Tone systems, see Setting Default Contact on page 40
for details on setting the default contact.
Your radio is able to send preprogrammed messages from the
Status List indicating your current activity to a radio contact (for
5-Tone systems) or to the dispatcher (for MDC systems).
For 5-Tone systems, a PTT button press while in the status list
sends the selected status update and returns to the Home
screen to initiate a voice call.
The last acknowledged message is kept at the top of the Status
List. The other messages are arranged in alphanumeric order.
Viewing a 5-Tone Status Details
Sending Status Update to Predefined Contact
Procedure:
1 < or > to Status and press e to select.
2 < or > to the required status. Press e to select.
3 < or > to Set as Default. Press e to send the
status update.
4 The display shows transitional mini notice, confirming your
Procedure:
1 < or > to Status and press e to select.
2 < or > to the required status. Press e to select.
3 < or > to View Details. Press e to select.
4 The display shows details of the selected status.
NOTE: A Software License Key sold separately is required to
use this feature
status update is being sent.
5 If the status update is acknowledged, a tone sounds and the
display shows positive mini notice. A 9 appears beside the
acknowledged status.
OR
If the status update is not acknowledged, a low tone sounds
and the display shows negative mini notice. A 9 remains
beside the previous status.
59
English
LKP_EMEA.book Page 60 Wednesday, March 28, 2012 1:35 PM
Privacy
If enabled, this feature helps to prevent eavesdropping by
unauthorized users on a channel by the use of a softwarebased scrambling solution. The signaling and user identification
portions of a transmission are not scrambled.
Your radio must have privacy enabled on the channel to send a
privacy-enabled transmission, although this is not a necessary
requirement for receiving a transmission. While on a privacyenabled channel, the radio is still able to receive clear
(unscrambled) transmissions.
Some radio models may not offer this Privacy feature. Check
with your dealer or system administrator for more
information.Procedure:
Press the programmed Privacy button to toggle privacy on or
off.
OR
Follow the procedure below.
1 c to access the menu.
Your radio supports two types of privacy:
2 < or > to Utilities and press e to select.
• Basic Privacy
3 < or > to Radio Settings and press e to select.
• Enhanced Privacy. (A Software License Key sold separately
is required for this feature.)
Only ONE of the privacy types above can be assigned to the
radio.
To unscramble a privacy-enabled call or data transmission, your
radio must be programmed to have the same Privacy Key (for
Basic Privacy), OR the same Key Value and Key ID (for
Enhanced Privacy) as the transmitting radio.
60
The LED lights up solid green while the radio is transmitting and
double blinks green when the radio is receiving an ongoing
privacy-enabled transmission.
If your radio receives a scrambled call that is of a different
Privacy Key, OR a different Key Value and Key ID, you will
either hear a garbled transmission (Basic Privacy) or nothing at
all (Enhanced Privacy).
English
4 < or > to Privacy
5 Press e to enable Privacy. The display shows 9 beside
Enabled.
OR
Press e to disable Privacy. The 9 disappears from beside
Enabled.
If the radio has a privacy type assigned, secure or unsecure
icon appears on the status bar, except when the radio is
sending or receiving an Emergency call or alarm.
LKP_EMEA.book Page 61 Wednesday, March 28, 2012 1:35 PM
NOTE: At Step 4, you can also use < or > to change the
selected option.
Dual Tone Multi Frequency (DTMF)
The Dual Tone Multi Frequency (DTMF) feature allows the radio
to operate in a radio system with an interface to telephone
systems.
Procedure:
To initiate a DTMF call.
1 Press and hold the PTT button.
2 Enter the desired number, * or #.
You can turn off the DTMF tone by disabling all radio tones and
alerts (see Turning the Radio Tones/Alerts On or Off on
page 69).
Multi-Site Controls
These features are applicable when your current radio channel
is part of an IP Site Connect or Linked Capacity Plus
configuration.
See IP Site Connect on page 13 and Linked Capacity Plus on
page 14 for more details about these configurations.
Starting an Automatic Site Search
NOTE: The radio only scans for a new site if the current signal
is weak or when the radio is unable to detect any signal
from the current site. If the RSSI value is strong, the
radio remains on the current site.
Procedure:
Press the programmed Site Lock On/Off button.
1 A tone sounds and the display shows Site Unlocked.
2 The LED blinks yellow rapidly when the radio is actively
searching for a new site, and turns off once the radio locks
on to a site.
3 The display shows the channel alias and the site roaming
icon appears.
OR
61
English
LKP_EMEA.book Page 62 Wednesday, March 28, 2012 1:35 PM
Procedure:
Use the menu.
1 c to access the menu.
Stopping an Automatic Site Search
When the radio is actively searching for a new site:
2 < or > to Utilities and press c to select.
Procedure:
Press the programmed Site Lock On/Off button.
3 < or > to Radio Settings and press c to select.
1 A tone sounds and the display shows Site Locked.
4 < or > to Site Roaming and press c to select.
2 The LED turns off and the display shows the channel alias.
5 < or > to Unlock Site and press c to select. A
OR
tone sounds and the display shows Site Unlocked.
6 The radio returns to the Home screen. The display shows
the channel alias and the site roaming icon appears.
7 The LED blinks yellow rapidly when the radio is actively
searching for a new site, and turns off once the radio locks
on to a site.
The radio also performs an automatic site search (site is
unlocked) during a PTT button press or data transmission if
the current channel, multi-site channel with an attached roam
list, is out of range.
Procedure:
Use the menu.
1 c to access the menu.
2 < or > to Utilities and press c to select.
3 < or > to Radio Settings and press c to select.
4 < or > to Site Roaming and press c to select.
5 < or > to Lock Site State.
6 Press c to lock site. The display shows 9 beside
Enabled.
OR
Press c to unlock site. The 9 disappears from beside
Enabled. The LED turns off and the radio returns to the
Home screen. The display shows the channel alias.
62
English
LKP_EMEA.book Page 63 Wednesday, March 28, 2012 1:35 PM
NOTE: At Step 5, you can also use < or > to change the
selected option.
Starting a Manual Site Search
connect to it, a tone sounds and the LED turns off. The
display shows Channel Busy.
8 The radio returns to the Home screen.
Procedure:
Press the programmed Manual Site Roam button and proceed
to Step 6.
OR
Follow the procedure below.
1 c to access the menu.
2 < or > to Utilities and press c to select.
3 < or > to Radio Settings and press c to select.
4 < or > to Site Roaming and press c to select.
5 < or > to Active Search and press c to select.
6 A tone sounds and the display shows Finding Site.
The LED blinks green.
7 If a new site is found, a tone sounds and the LED turns off.
The display shows Site <Alias> Found.
OR
If there is no available site within range, a tone sounds and
the LED turns off. The display shows Out of Range.
OR
If a new site is within range, but the radio is unable to
63
English
LKP_EMEA.book Page 64 Wednesday, March 28, 2012 1:35 PM
Security
You can enable or disable any radio in the system. For example,
you might want to disable a stolen radio, to prevent the thief
from using it, and enable that radio, when it is recovered.
NOTE: Performing Radio Disable and Enable is limited to
radios with these functions enabled. Check with your
dealer or system administrator for more information.
Radio Disable
Procedure:
Use the programmed Radio Disable button.
1 Press the programmed Radio Disable button.
2 < or >to the required alias or ID and press e to
select.
3 The display shows transitional mini notice, indicating the
request is in progress. The LED blinks green.
4 Wait for acknowledgment.
5 If successful, a positive indicator tone sounds and the
display shows positive mini notice.
OR
If unsuccessful, a negative indicator tone sounds and the
display shows negative mini notice.
64
OR
English
Procedure:
Use the menu.
1 c to access the menu.
2 < or > to Contacts and press e to select. The
entries are alphabetically sorted.
3 < or > to the required alias or ID and press e to
select.
< or > to Radio
Disable and press e to select.
4 The display shows transitional mini notice, indicating the
request is in progress. The LED blinks green.
5 Wait for acknowledgment.
6 If successful, a positive indicator tone sounds and the
display shows positive mini notice.
OR
If unsuccessful, a negative indicator tone sounds and the
display shows negative mini notice.
Do not press d during the Radio Disable operation as you
will not get an acknowledgement message.
LKP_EMEA.book Page 65 Wednesday, March 28, 2012 1:35 PM
Radio Enable
Procedure:
Use the programmed Radio Enable button.
1 Press the programmed Radio Enable button.
2 < or > to the required alias or ID and press e to
select.
3 The display shows Radio Enable and the subscriber alias
or ID. The LED lights up solid green.
4 Wait for acknowledgment.
5 If successful, the radio sounds a positive indicator tone and
the display shows positive mini notice.
OR
If unsuccessful, the radio sounds a negative indicator tone
and the display shows negative mini notice.
4 < or > to Radio Enable and press e to select. The
LED blinks green.
5 The display shows Radio Enable and the subscriber alias
or ID. The LED lights up solid green.
6 Wait for acknowledgment.
7 If successful, the radio sounds a positive indicator tone and
the display shows positive mini notice.
OR
If unsuccessful, the radio sounds a negative indicator tone
and the display shows negative mini notice.
Do not press d during the Radio Enable operation as you
will not get an acknowledgement message.
OR
Procedure:
Use the menu.
1 c to access the menu.
2 < or > to Contacts and press e to select. The
entries are alphabetically sorted.
3 < or > to the required alias or ID and press e to
select.
65
English
LKP_EMEA.book Page 66 Wednesday, March 28, 2012 1:35 PM
Lone Worker
This feature prompts an emergency to be raised if there is no
user activity, such as any radio button press or activation of the
channel selector, for a predefined time.
Following no user activity for a programmed duration, the radio
pre-warns the user via an audio indicator once the inactivity
timer expires.
If there is still no acknowledgment by the user before the
predefined reminder timer expires, the radio initiates an
Emergency Alarm.
Only one of the following Emergency Alarms is assigned to this
feature:
Password Lock Features
If enabled, this feature allows you to access your radio via
password upon powering up.
Accessing the Radio from Password
Procedure:
Power up the radio.
1 You will be prompt to enter a four-digit password.
2 Enter your current four-digit password. Press < or >
to choose each digit’s numeric value (0-9). Press >or
• Emergency Alarm
c to move to next digit. Each digit changes to ●. Press
e to confirm your selection.
• Emergency Alarm with Call
You hear a positive indicator tone for every digit pressed.
• Emergency Alarm with Voice to Follow
The radio remains in the emergency state allowing voice
messages to proceed until action is taken. See Emergency
Operation on page 46 on ways to exit Emergency.
NOTE: This feature is limited to radios with this function
enabled. Check with your dealer or system
administrator for more information.
66
English
Press < to remove the each ● on the display.
3 If the password is correct:
Your radio proceeds to power up. See Powering Up the
Radio on page 5.
OR
If the password is incorrect:
The display shows Wrong Password. Repeat Step 2.
OR
After the third incorrect password, the display shows Wrong
LKP_EMEA.book Page 67 Wednesday, March 28, 2012 1:35 PM
Password and then, shows Radio Locked. A tone sounds
and the LED double blinks yellow.
Turning the Password Lock On or Off
Procedure:
Your radio enters into locked state for 15 minutes, and responds
to inputs from On/Off/Volume Control Knob and programmed
Backlight Auto button only.
1 c to access the menu.
NOTE: The radio is unable to receive any call, including
emergency calls, in locked state.
3 < or > to Radio Settings and press e to select.
Unlocking the Radio from Locked State
5 Enter your current four-digit password.
Procedure:
Wait for 15 minutes. Repeat Steps 1 to 3 in Accessing the
Radio from Password on page 66.
OR
Power up the radio, if you have powered down the radio during
locked state:
1 A tone sounds and the LED double blinks yellow. The
display shows Radio Locked.
2 Wait for 15 minutes. Repeat Accessing the Radio from
Password on page 66.
Your radio restarts the 15 minutes timer for locked state when
you power up.
2 < or > to Utilities and press e to select.
4 < or > to Passwd Lock and press e to select.
See Step 2 in Accessing the Radio from Password on
page 66.
6 If the password is correct:
Press e to enable Password Lock. The display shows 9
beside Enabled.
OR
Press e to disable Password Lock. The 9 disappears from
beside Enabled.
OR
If the password is incorrect:
The display shows Wrong Password and automatically
returns to the previous menu.
NOTE: At Step 6, you can also use < or > to change the
selected option.
67
English
LKP_EMEA.book Page 68 Wednesday, March 28, 2012 1:35 PM
Changing the Password
Procedure:
1 c to access the menu.
2 < or > to Utilities and press e to select.
3 < or > to Radio Settings and press e to select.
4 < or > to Passwd Lock and press e to select.
5 Enter your current four-digit password.
See Step 2 in Accessing the Radio from Password on
page 66.
6 If the password is correct:
< or > to Change
Pwd and press e to select.
OR
If the password is incorrect:
The display shows Wrong Password and automatically
returns to the previous menu.
7 Enter a new four-digit password. See Step 2 in Accessing
the Radio from Password on page 66.
8 Re-enter the new four-digit password. See Step 2 in
Accessing the Radio from Password on page 66.
9 If both of the new password inputs match:
68
The display shows Password Changed.
OR
English
If both of the new password inputs do not match:
The display shows Passwords Do Not Match.
10 The screen automatically returns to the previous menu.
Notification List
Your radio has a Notification List that collects all your “unread”
events on the channel, such as unread text messages, missed
calls, and call alerts.
The Notification icon appears on the status bar when the
Notification List has one or more events.
The list supports a maximum of forty (40) unread events. When
it is full, the next event automatically replaces the oldest event.
After the events are read, they are removed from the
Notification List.
Accessing the Notification List
Procedure:
1 c to access the menu.
2 < or > to Notification and press e to select.
3 < or > to the required event and press e to select.
Long press d to return to the Home screen.
LKP_EMEA.book Page 69 Wednesday, March 28, 2012 1:35 PM
Utilities
Turning the Radio Tones/Alerts On or Off
You can enable and disable all radio tones and alerts (except for
the incoming Emergency alert tone) if needed.
Procedure:
Press the programmed All Tones/Alerts button to toggle all
tones on or off.
OR
Follow the procedure below.
1 c to access the menu.
2 < or > to Utilities and press e to select.
3 < or > to Radio Settings and press e to select.
4 < or > to Tones/Alerts and press e to select.
5 < or > to All Tones and press e to select.
6 Press e to enable all tones. The display shows 9 beside
Enabled.
OR
Press e to disable all tones. The 9 disappears from beside
Enabled.
NOTE: At Step 5, you can also use < or > to change the
selected option.
Setting the Tone Alert Volume Offset Level
You can adjust the Tone Alert Volume Offset level if needed.
This feature adjusts the volume of the tones/alerts, allowing it to
be higher or lower than the voice volume.
Procedure:
1 c to access the menu.
2 < or > to Utilities and press e to select.
3 < or > to Radio Settings and press e to select.
4 < or > to Tones/Alerts and press e to select.
5 < or > to Vol. Offset and press e to select.
6 < or > to the required volume value. The radio
sounds a feedback tone with each corresponding volume
value.
7 Press e to keep the required displayed volume value.
OR
Repeat Step 6 to select another volume value.
OR
d to exit without changing the current volume offset
settings.
69
English
LKP_EMEA.book Page 70 Wednesday, March 28, 2012 1:35 PM
Turning the Talk Permit Tone On or Off
Setting the Power Level
You can enable and disable the Talk Permit Tone if needed.
You can customize your radio’s power setting to high or low for
each channel.
Procedure:
1 c to access the menu.
2 < or > to Utilities and press e to select.
3 < or > to Radio Settings and press e to select.
Settings: High enables communication with radios located at
a considerable distance from you. Low enables communication
with radios in closer proximity.
5 < or > to Talk Permit and press e to select.
Procedure:
Press the programmed Power Level button to toggle transmit
power level between high and low.
OR
Follow the procedure below.
6 Press e to enable Talk Permit Tone. The display shows 9
1 c to access the menu.
4 < or > to Tones/Alerts and press e to select.
beside Enabled.
OR
Press e to disable Talk Permit Tone. The 9 disappears
from beside Enabled.
NOTE: At Step 5, you can also use < or > to change the
selected option.
2 < or > to Utilities and press e to select.
3 < or > to Radio Settings and press e to select.
4 < or > to Power and press e to select.
5 < or > to the required setting and press c to
select. 9 appears beside selected setting.
6 Screen returns to the previous menu.
Long press d to return to the Home screen. The power level
icon is visible.
70
English
LKP_EMEA.book Page 71 Wednesday, March 28, 2012 1:35 PM
NOTE: At Step 4, you can also use < or > to change the
selected option.
Adjusting the Display Brightness
You can adjust radio’s display brightness as needed.
Procedure:
Press the programmed Brightness button and proceed to
Step 5.
OR
Follow the procedure below.
1 c to access the menu.
2 < or > to Utilities and press e to select.
3 < or > to Radio Settings and press e to select.
4 < or > to Brightness and press e to select.
5 The display shows a progress bar. Decrease display
brightness by pressing < or increase the display
brightness by pressing >. Press e to confirm your
entry.
Controlling the Display Backlight
You can enable or disable the radio’s display backlight as
needed. The setting also affects the Menu Navigation Buttons.
Procedure:
Press the programmed Backlight Auto button to toggle the
backlight settings.
OR
Follow the procedure below.
1 c to access the menu.
2 < or > to Utilities and press e to select.
3 < or > to Radio Settings and press e to select.
4 < or > to Backlight Auto
5 Press e to enable backlight. The display shows 9 beside
Enabled.
OR
Press e to disable backlight. The 9 disappears from
beside Enabled.
The display backlight are automatically turned off if the LED
indicator is disabled (see Turning the LED Indicator On or Off
on page 73).
NOTE: At Step 4, you can also use < or > to change the
selected option.
71
English
LKP_EMEA.book Page 72 Wednesday, March 28, 2012 1:35 PM
Setting the Squelch Level
You can adjust your radio's squelch level to filter out unwanted
calls with low signal strength or channels that have a higher
than normal background noise.
Settings: Normal is the default. Tight filters out (unwanted)
calls and/or background noise. However, calls from remote
locations may also be filtered out.
Procedure:
Press the programmed Squelch button to toggle squelch level
between normal and tight.
OR
Follow the procedure below.
1 c to access the menu.
2 < or > to Utilities and press e to select.
3 < or > to Radio Settings and press e to select.
4 < or > to Squelch and press e to select.
5 The display shows Tight and Normal. < or > to the
required setting and press e to enable. 9 appears besides
selected setting.
6 Screen returns to the previous menu.
72
English
NOTE: At Step 4, you can also use < or > to change the
selected option.
Turning the Introduction Screen On or Off
You can enable and disable the Introduction Screen if needed.
Procedure:
1 c to access the menu.
2 < or > to Utilities and press e to select.
3 < or > to Radio Settings and press e to select.
4 < or > to Intro Screen and press e to select.
5 Press e to enable Introduction Screen. The display shows
9 beside Enabled.
OR
Press e to disable Introduction Screen. The 9 disappears
from beside Enabled.
NOTE: At Step 4, you can also use < or > to change the
selected option.
LKP_EMEA.book Page 73 Wednesday, March 28, 2012 1:35 PM
Language
Turning the LED Indicator On or Off
You can set your radio display to be in your required language.
You can enable and disable the LED Indicator if needed.
Procedure:
Procedure:
1 c to access the menu.
1 c to access the menu.
2 < or > to Utilities and press e to select.
2 < or > to Utilities and press e to select.
3 < or > to Radio Settings and press e to select.
3 < or > to Radio Settings and press e to select.
4 < or > to Language and press e to select.
4 < or > to LED Indicator and press e to select.
5 < or > to the required language and press e to
5 Press e to enable LED indicator. The display shows 9
enable. 9 appears beside selected language.
NOTE: At Step 4, you can also use < or
the selected option.
> to change
beside Enabled.
OR
Press e to disable LED indicator. The 9 disappears from
beside Enabled.
The display backlight, and buttons backlighting are
automatically turned off if the LED indicator is disabled (see
Controlling the Display Backlight on page 71).
NOTE: At Step 4, you can also use < or
the selected option.
> to change
Turning the Voice Operating Transmission (VOX)
Feature On or Off
This feature allows you to initiate a hands-free voice activated
call on a programmed channel. The radio automatically
73
English
LKP_EMEA.book Page 74 Wednesday, March 28, 2012 1:35 PM
transmits, for a programmed period, whenever the microphone
on the VOX-capable accessory detects voice.
Pressing the PTT button during radio operation will disable
VOX. To re-enable VOX, do one of the following:
• Turn the radio off and power it on again, OR
• Change the channel via the Channel Selector Knob, OR
• Follow the procedure below.
NOTE: Turning this feature on or off is limited to radios with
this function enabled. Check with your dealer or system
administrator for more information.
Procedure:
Press the programmed VOX button to toggle the feature on or
off.
OR
Follow the procedure below.
If the Talk Permit Tone feature is enabled (see Turning the Talk
Permit Tone On or Off on page 70), use a trigger word to
initiate the call. Wait for the Talk Permit Tone to finish before
speaking clearly into the microphone.
NOTE: At Step 4, you can also use < or > to change the
selected option.
Voice Announcement
This feature enables the radio to audibly indicate the current
Zone or Channel the user has just assigned, or programmable
button press. This audio indicator can be customized per
customer requirements. This is typically useful when the user is
in a difficult condition to read the content shown on the display.
1 c to access the menu.
Use the following features to toggle Voice Announcement on or
off.
2 < or > to Utilities and press e to select.
Procedure:
3 < or > to Radio Settings and press e to select.
74
Press e to disable VOX. The 9 disappears from beside
Enabled.
4 < or > to VOX.
Press the programmed Voice Announcement button.
OR
Follow the procedure below.
5 Press e to enable VOX. The display shows 9 beside
1 c to access the menu.
Enabled.
OR
English
2 < or > to Utilities and press e to select.
LKP_EMEA.book Page 75 Wednesday, March 28, 2012 1:35 PM
3 < or > to Radio Settings and press e to select.
Call Forwarding
4 < or > to Voice Announcement.
You can enable your radio to automatically forward voice calls
to another radio.
5 Press e to enable Voice Announcement. The display
shows 9 beside Enabled.
OR
Press e to disable Voice Announcement. The 9
disappears from beside Enabled.
NOTE: At Step 3, you can also use < or > to change
the selected option.
Procedure:
1 c to access the menu.
2 < or > to Utilities and press e to select.
3 < or > to Call Forward.
4 Press e to enable Call Forwarding. The display shows 9
beside Enabled.
OR
Press e to disable Call Forwarding. The 9 disappears
from beside Enabled.
NOTE: At Step 3, you can also use < or > to change the
selected option.
75
English
LKP_EMEA.book Page 76 Wednesday, March 28, 2012 1:35 PM
Menu Timer
Analog Mic Automatic Gain Control (AGC)
Set the period of time your radio stays in the menu before it
automatically switches to the Home screen.
This feature controls the your radio's microphone gain
automatically while transmitting on an analog system. It
suppresses loud audio or boosts soft audio to a preset value in
order to provide a consistent level of audio.
Procedure:
1 c to access the menu.
Procedure:
2 < or > to Utilities and press e to select.
1 c to access the menu.
3 < or > to Radio Settings and press e to select.
2 < or > to Utilities and press e to select.
4 < or > to Menu Timer and press e to select.
3 < or > to Radio Settings and press e to select.
5 < or > to the required setting and press e to enable.
4 < or > to Analog Mic AGC.
5 Press e to enable Analog Mic AGC. The display shows 9
beside Enabled.
OR
Press e to disable Analog Mic AGC. The 9 disappears
from beside Enabled.
NOTE: At Step 3, you can also use < or > to change the
selected option.
76
English
LKP_EMEA.book Page 77 Wednesday, March 28, 2012 1:35 PM
Digital Mic AGC
Intelligent Audio
This feature controls the your radio's microphone gain
automatically while transmitting on an digital system. It
suppresses loud audio or boosts soft audio to a preset value in
order to provide a consistent level of audio.
Your radio automatically adjusts its audio volume to overcome
current background noise in the environment.
Procedure:
1 c to access the menu.
2 < or > to Utilities and press e to select.
3 < or > to Radio Settings and press e to select.
Use the following features to toggle Intelligent Audio on or off.
Procedure:
Press the programmed Intelligent Audio button to toggle the
feature on or off.
OR
Follow the procedure below.
1 c to access the menu.
4 < or > to Digital Mic AGC.
2 < or > to Utilities and press e to select.
5 Press e to enable Digital Mic AGC. The display shows 9
3 < or > to Radio Settings and press e to select.
beside Enabled.
OR
Press e to disable Digital Mic AGC. The 9 disappears
from beside Enabled.
NOTE: At Step 3, you can also use < or > to change the
selected option.
4 < or > to Intelligent Audio.
5 Press e to enable Intelligent Audio. The display shows 9
beside Enabled.
OR
Press e to disable Intelligent Audio. The 9 disappears
from beside Enabled.
NOTE: At Step 3, you can also use < or > to change the
selected option.
77
English
LKP_EMEA.book Page 78 Wednesday, March 28, 2012 1:35 PM
Accessing General Radio Information
Your radio contains information on the following:
• Battery
• Radio Alias and ID
• Firmware and Codeplug Versions
NOTE: Press d at any time to return to the previous screen
or long press d to return to the Home screen. The
radio exits the current screen once the inactivity timer
expires.
Accessing the Battery Information
Displays information on your radio battery.
Checking the Radio Alias and ID
Displays the ID of your radio.
Procedure:
Press the programmed Radio Alias and ID button to check your
radio alias and ID. You hear a positive indicator tone.
OR
Follow the procedure below.
1 c to access the menu.
Procedure:
2 < or > to Utilities and press e to select.
1 c to access the menu.
3 < or > to Radio Info and press e to select.
2 < or > to Utilities and press e to select.
4 < or > to My Number and press e to select.
3 < or > to Radio Info and press e to select.
5 The first line of the display shows the radio alias. The
4 < or > to Battery Info and press e to select.
5 The display shows the battery information.
78
Recondition Battery if the battery requires
reconditioning in an IMPRES charger.
After the reconditioning process, the display then shows the
battery information.
OR
For IMPRES batteries ONLY: The display reads
English
second line of the display shows the radio ID
You can also press the programmed Radio Alias and ID button
to return to the previous screen.
LKP_EMEA.book Page 79 Wednesday, March 28, 2012 1:35 PM
Checking the Firmware Version and Codeplug
Front Panel Programming (FPP)
Version
Displays the firmware and codeplug versions on your radio.
Procedure:
1 c to access the menu.
2 < or > to Utilities and press e to select.
3 < or > to Radio Info and press e to select.
4 < or > to Versions and press e to select.
5 The display shows the current firmware and codeplug
versions.
Your radio is able to customize certain feature parameters to
enhance the use of your radio.
Entering FPP Mode
Procedure:
1 c to access the menu.
2 < or > to Utilities and press e to select.
3 < or > to Program Radio and press e to select.
NOTE: Long press d at any time to return to the Home
screen.
Editing FPP Mode Parameters
Use the following buttons as required while navigating through
the feature parameters.
<, > – Scroll through options, increase/decrease values,
or navigate vertically
e – Select the option or enter a sub-menu
d – Short-press to return to previous menu or to exit the
selection screen. Long-press to return to Home screen.
79
English
Blank.fm Page 80 Friday, June 8, 2012 9:36 AM
Notes
Notes
80
English
LKP_EMEA.book Page 81 Wednesday, March 28, 2012 1:35 PM
Batteries and Chargers Warranty
The Capacity Warranty
The capacity warranty guarantees 80% of the rated capacity for the
The workmanship warranty guarantees against defects in
workmanship under normal use and service.
All MOTOTRBO Batteries
Two (2) Years
IMPRES Chargers (Single-Unit and Multi-Unit,
Non-Display)
Two (2) Years
IMPRES Chargers (Multi-Unit with Display)
One (1) Year
Nickel Metal-Hydride (NiMH) or Lithium-Ion
(Li-lon) Batteries
12 Months
IMPRES Batteries, When Used Exclusively
with IMPRES Chargers
18 Months
Batteries and Chargers Warranty
warranty duration.
The Workmanship Warranty
81
English
LKP_EMEA.book Page 82 Wednesday, March 28, 2012 1:35 PM
obligations or liability for additions or modifications to this warranty
unless made in writing and signed by an officer of MOTOROLA.
Limited Warranty
MOTOROLA COMMUNICATION PRODUCTS
I. WHAT THIS WARRANTY COVERS AND FOR HOW
LONG:
Limited Warranty
MOTOROLA SOLUTIONS, INC. (“MOTOROLA”) warrants the
MOTOROLA manufactured Communication Products listed below
(“Product”) against defects in material and workmanship under
normal use and service for a period of time from the date of
purchase as scheduled below:
82
DP Series Digital Portable Radios
Two (2) Years
Product Accessories (Excluding
Batteries and Chargers)
One (1) Year
MOTOROLA, at its option, will at no charge either repair the
Product (with new or reconditioned parts), replace it (with a new or
reconditioned Product), or refund the purchase price of the Product
during the warranty period provided it is returned in accordance
with the terms of this warranty. Replaced parts or boards are
warranted for the balance of the original applicable warranty period.
All replaced parts of Product shall become the property of
MOTOROLA.
This express limited warranty is extended by MOTOROLA to the
original end user purchaser only and is not assignable or
transferable to any other party. This is the complete warranty for the
Product manufactured by MOTOROLA. MOTOROLA assumes no
English
Unless made in a separate agreement between MOTOROLA and
the original end user purchaser, MOTOROLA does not warrant the
installation, maintenance or service of the Product.
MOTOROLA cannot be responsible in any way for any ancillary
equipment not furnished by MOTOROLA which is attached to or
used in connection with the Product, or for operation of the Product
with any ancillary equipment, and all such equipment is expressly
excluded from this warranty. Because each system which may use
the Product is unique, MOTOROLA disclaims liability for range,
coverage, or operation of the system as a whole under this
warranty.
II. GENERAL PROVISIONS:
This warranty sets forth the full extent of MOTOROLA'S
responsibilities regarding the Product. Repair, replacement or
refund of the purchase price, at MOTOROLA’s option, is the
exclusive remedy. THIS WARRANTY IS GIVEN IN LIEU OF ALL
OTHER EXPRESS WARRANTIES. IMPLIED WARRANTIES,
INCLUDING WITHOUT LIMITATION, IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED
WARRANTY. IN NO EVENT SHALL MOTOROLA BE LIABLE FOR
DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE
PRODUCT, FOR ANY LOSS OF USE, LOSS OF TIME,
INCONVENIENCE, COMMERCIAL LOSS, LOST PROFITS OR
SAVINGS OR OTHER INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR
LKP_EMEA.book Page 83 Wednesday, March 28, 2012 1:35 PM
INABILITY TO USE SUCH PRODUCT, TO THE FULL EXTENT
SUCH MAY BE DISCLAIMED BY LAW.
SOME STATES DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES
OR LIMITATION ON HOW LONG AN IMPLIED WARRANTY
LASTS, SO THE ABOVE LIMITATION OR EXCLUSIONS MAY
NOT APPLY.
This warranty gives specific legal rights, and there may be other
rights which may vary from state to state.
IV. HOW TO GET WARRANTY SERVICE:
You must provide proof of purchase (bearing the date of purchase
and Product item serial number) in order to receive warranty
service and, also, deliver or send the Product item, transportation
and insurance prepaid, to an authorized warranty service location.
Warranty service will be provided by MOTOROLA through one of its
authorized warranty service locations. If you first contact the
company which sold you the Product (e.g., dealer or
communication service provider), it can facilitate your obtaining
warranty service.
V. WHAT THIS WARRANTY DOES NOT COVER:
A) Defects or damage resulting from use of the Product in other
than its normal and customary manner.
B) Defects or damage from misuse, accident, water, or neglect.
Limited Warranty
III. STATE LAW RIGHTS:
C)Defects or damage from improper testing, operation,
maintenance, installation, alteration, modification, or adjustment.
D)Breakage or damage to antennas unless caused directly by
defects in material workmanship.
E) A Product subjected to unauthorized Product modifications,
disassembles or repairs (including, without limitation, the addition
to the Product of non-MOTOROLA supplied equipment) which
adversely affect performance of the Product or interfere with
MOTOROLA's normal warranty inspection and testing of the
Product to verify any warranty claim.
F) Product which has had the serial number removed or made
illegible.
G)Rechargeable batteries if:
(1) any of the seals on the battery enclosure of cells are broken
or show evidence of tampering.
(2) the damage or defect is caused by charging or using the
battery in equipment or service other than the Product for which it
is specified.
H)Freight costs to the repair depot.
I) A Product which, due to illegal or unauthorized alteration of the
software/firmware in the Product, does not function in
accordance with MOTOROLA’s published specifications or the
FCC certification labeling in effect for the Product at the time the
Product was initially distributed from MOTOROLA.
J) Scratches or other cosmetic damage to Product surfaces that
does not affect the operation of the Product.
K) Normal and customary wear and tear.
83
English
LKP_EMEA.book Page 84 Wednesday, March 28, 2012 1:35 PM
Limited Warranty
VI. PATENT AND SOFTWARE PROVISIONS:
MOTOROLA will defend, at its own expense, any suit brought
against the end user purchaser to the extent that it is based on a
claim that the Product or parts infringe a United States patent, and
MOTOROLA will pay those costs and damages finally awarded
against the end user purchaser in any such suit which are
attributable to any such claim, but such defense and payments are
conditioned on the following:
A) that MOTOROLA will be notified promptly in writing by such
purchaser of any notice of such claim;
B) that MOTOROLA will have sole control of the defense of such
suit and all negotiations for its settlement or compromise; and
C)should the Product or parts become, or in MOTOROLA’s opinion
be likely to become, the subject of a claim of infringement of a
United States patent, that such purchaser will permit
MOTOROLA, at its option and expense, either to procure for
such purchaser the right to continue using the Product or parts or
to replace or modify the same so that it becomes non-infringing
or to grant such purchaser a credit for the Product or parts as
depreciated and accept its return. The depreciation will be an
equal amount per year over the lifetime of the Product or parts as
established by MOTOROLA.
84
English
MOTOROLA will have no liability with respect to any claim of patent
infringement which is based upon the combination of the Product or
parts furnished hereunder with software, apparatus or devices not
furnished by MOTOROLA, nor will MOTOROLA have any liability
for the use of ancillary equipment or software not furnished by
MOTOROLA which is attached to or used in connection with the
Product. The foregoing states the entire liability of MOTOROLA with
respect to infringement of patents by the Product or any parts
thereof.
Laws in the United States and other countries preserve for
MOTOROLA certain exclusive rights for copyrighted MOTOROLA
software such as the exclusive rights to reproduce in copies and
distribute copies of such MOTOROLA software. MOTOROLA
software may be used in only the Product in which the software was
originally embodied and such software in such Product may not be
replaced, copied, distributed, modified in any way, or used to
produce any derivative thereof. No other use including, without
limitation, alteration, modification, reproduction, distribution, or
reverse engineering of such MOTOROLA software or exercise of
rights in such MOTOROLA software is permitted. No license is
granted by implication, estoppel or otherwise under MOTOROLA
patent rights or copyrights.
VII. GOVERNING LAW:
This Warranty is governed by the laws of the State of Illinois, U.S.A.
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and
the Stylized M logo are trademarks or registered trademarks
of Motorola Trademark Holdings, LLC and are used under license.
All other trademarks are the property of their respective owners.
© 2012 Motorola Solutions, Inc. All rights reserved.
March 2012.
www.motorolasolutions.com/mototrbo
*68012004046*
68012004046-A
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising