Rinnai Wall Heaters
PRODUCT SPECIFICATIONS
Model Number
Gas
Type
Input Range (BTU)
(Low/High)
EX08C (RHFE202FTA)
Beige only
NG
EX11C (RHFE265FTA)
Beige only
NG
5,500 / 11,000
81%
LP
5,700 / 11,000
82%
EX17C (RHFE434FTA)
Beige only
NG
NG
EX22CW (RHFE559FTA-W)
White
ES38 (RHFE1004RFA)
Beige
NG
ES38W (RHFE1004RFA-W)
White
LP
48
96.4 / 128.5
110.5 / 141.3
82%
81%
29 7/8” x 22 7/8” x 10 1/8”
73
36 5/8” x 26 3/8” x 13”
125
82%
10,500 / 38,400
ENERGY-EFFICIENT DIRECT VENT WALL FURNACES
80.6%
230.4 / 360.5
10,500 / 36,500
82.0%
* This specification is for shipping weight.
Accessories for Flexible Installations
Product Warranty
• 10 years on the heat exchanger
• 5 years on parts
• 2 years on labor
VENT TERMINATIONS
CONVERSION KITS
Part
Number
Model
Description
FOT-150
S Vent (3” – 4 1/2”)
FOT-151
A Vent (4 1/2” - 9 1/2”)
FOT-152
B Vent (9 1/2” - 15 3/4”)
FOT-153
C Vent (15 3/4” – 23 5/8”)
FOT-154
D Vent (23 5/8” – 31 1/2”)
To NG
To LP
EX08C
204000033
204000037
EX11C
204000034
204000038
EX17C
204000035
204000039
EX22C /
EX22CW
204000036
204000040
ACCESSORIES
MODEL
EXTENSION KITS
COVER KITS
FOT-155
FOT-156
FOT-157
FOT-158
FOT-201
•
•
•
•
•
EX17C
•
•
•
•
EX17C / EX17CW
•
•
•
•
EX11C
FOT-219
ES38
FOT-220
FOT-221
FOT-102
FOT-140
FOT-141
FOT-142
•
•
•
•
•
•
•
•
•
•
•
•
FOT-103
•
FOT-114
•
FOT-115
•
FOT-132
•
FOT-133
•
FOT-134
•
Rinnai is continually updating and improving products; therefore, specifications are subject to change without prior notice. Local, state, provincial and federal codes must be adhered to prior to and upon installation.
FOR MORE INFORMATION ON RINNAI PRODUCTS
ADDITIONAL RINNAI LITERATURE AVAILABLE
CONDENSING BOILERS
RINNAI INTELLIGENT
FIREPLACES
RINNAI HYDRONIC
FURNACES
Rinnai America Corporation
103 International Drive
Peachtree City, GA 30269
Toll Free 1-800-621-9419
Phone: 678-829-1700 • Fax: 678-364-8643
Visit our Web site: www.rinnai.us
E-mail: marketing@rinnai.us
R-CNHT-E-01 r6 © 2010 Rinnai America Corporation 40M-08/2010
ENERGYSAVER® DIRECT VENT WALL FURNACES
A NEW APPROACH TO HEATING
110.5 / 162.7
8,200 / 20,700
LP
Wt.
(lbs.)*
18 1/4” x 27 3/8” x 10 1/8”
81%
8,200 / 21,500
Dimensions
(W x H x D)
48.3 / 78.6
83%
8,200 / 16,700
LP
Fan CFM Output
(Low / High)
82%
3,000 / 8,000
LP
EX22C (RHFE559FTA)
Beige
AFUE
Rating
When winter sets in, there are certain rooms that are used less because of cold spots. However, with the consistent and even
heat provided by a Rinnai Direct Vent Wall Furnace, you can enjoy comfortable heat anywhere, all winter long. Rinnai Wall
Furnaces are efficient and easy to install. And, the innovative cool-to-the-touch cabinet makes them safe for the whole family.
TRADITIONAL VS RINNAI APPROACH TO HEATING
Benefits of the “C Series”
At a Glance
Ultra Efficient Heating Solution
• Large fluctuations in room temperature
The Rinnai Direct Vent Wall Furnace’s reputation lies in its ability to
extract up to 83% AFUE efficiency through the use of a unique
stainless steel heat exchanger, modulating gas valve and variablespeed blower. Whether it’s a whole-house or zone-heating solution, the
Rinnai Wall Furnace will provide a comfortable living environment,
reduce energy consumption and lower operating costs compared to
a traditional furnace.
• Slow response to thermostatically controlled heat settings
• Modern cabinet design
• User-friendly controls
• Standby power of less than 1 watt
• Programmable thermostat (Celsius or
Fahrenheit) with timer function
• Setback plus frost protection
The Traditional Approach
• Higher operating costs
• Poor distribution of the heat provided through leaky ducts
The Rinnai Approach
• Energy-efficient and economical zone or whole-house heating
HOW IT WORKS
• Wall furnace quickly adapts to small temperature changes
Temperature-Sensing
Thermistor
• Gas type field convertible
Advanced Safety Features
• Auto restart
• “Cool-to-the-touch” cabinet
• Modulating blower and gas valve automatically adjust to individual
heating needs, providing comfortable, consistent temperature from
ceiling to floor
• Quiet operation
• Sealed combustion – protects indoor air quality
• No ductwork required
• Approved for use in high altitudes of
up to 10,200 feet
• Furnace automatically shuts down if vent is obstructed or blocked
• Child safety lock
• Consistently monitors room
temperature 2” off the floor
• Accurately detects temperature
changes less than one degree
Rinnai Response
Modulation Technology
• Electronic ignition – no pilot light
• Wind tunnel tested venting systems
• On-board self diagnostics for easier maintenance
Modulating technology
replaces only the heat escaping
the structure by continuously
operating at heating levels
based on the current demand,
which leads to lower gas usage
and higher levels of comfort.
• Within 10 seconds, the Rinnai
wall furnace begins to gently heat the
room at low fan speed
• It increases fan speed and BTU
output if necessary to achieve the
desired temperature
• Once the desired temperature is
achieved, the furnace goes into
standby mode
Continuous-Run Modulating Technology
74° F
72° F
70° F
68° F
66° F
Gas Usage
Gas Usage
Gas Usage
Room Monitoring
Newly Designed, User Friendly
With the new user-friendly control panel, you can choose
a set temperature or program the timers to take total
control over your heating needs.
Venting Made Safe and Easy
Rinnai venting uses outside air which improves indoor air quality. It is easy to install
and can be vented up to 13 feet.
Product Applications
Enjoy comfortable heat in any type of:
• Room Addition or Sunroom
• Multifamily Housing
• Basement Remodel
• Condo or Loft
• Cabin, Lake or Vacation Home
EX08C / EX11C
(ideal output for
smaller areas)
EX17C
(ideal output for
mid-sized areas)
EX22C / EX22CW
(EX22CW shown)
(ideal output for mid to
larger-sized areas)
ES38
(ideal output for mid to
larger-sized areas)
Discrete Vent
Terminal,
only 4” in
diameter
Direct, Through-Wall
Vent Termination
Through-Wall Vent
Termination
with Extension Kit
• Electric-to-Gas Conversion Project
• Manufactured and Mobile Homes
For illustration only. Please reference the Owner’s Manual for installation requirements.
Through-Wall Vent
Termination
with Extension Kit
and Elbow
• As the temperature of the room
gradually drops, the wall furnace
restarts and gradually warms the room
back to the desired temperature
• If there is a sudden injection
of cold air, the furnace automatically
adjusts fan speed and BTUs to
quickly restore the set temperature
When winter sets in, there are certain rooms that are used less because of cold spots. However, with the consistent and even
heat provided by a Rinnai Direct Vent Wall Furnace, you can enjoy comfortable heat anywhere, all winter long. Rinnai Wall
Furnaces are efficient and easy to install. And, the innovative cool-to-the-touch cabinet makes them safe for the whole family.
TRADITIONAL VS RINNAI APPROACH TO HEATING
Benefits of the “C Series”
At a Glance
Ultra Efficient Heating Solution
• Large fluctuations in room temperature
The Rinnai Direct Vent Wall Furnace’s reputation lies in its ability to
extract up to 83% AFUE efficiency through the use of a unique
stainless steel heat exchanger, modulating gas valve and variablespeed blower. Whether it’s a whole-house or zone-heating solution, the
Rinnai Wall Furnace will provide a comfortable living environment,
reduce energy consumption and lower operating costs compared to
a traditional furnace.
• Slow response to thermostatically controlled heat settings
• Modern cabinet design
• User-friendly controls
• Standby power of less than 1 watt
• Programmable thermostat (Celsius or
Fahrenheit) with timer function
• Setback plus frost protection
The Traditional Approach
• Higher operating costs
• Poor distribution of the heat provided through leaky ducts
The Rinnai Approach
• Energy-efficient and economical zone or whole-house heating
HOW IT WORKS
• Wall furnace quickly adapts to small temperature changes
Temperature-Sensing
Thermistor
• Gas type field convertible
Advanced Safety Features
• Auto restart
• “Cool-to-the-touch” cabinet
• Modulating blower and gas valve automatically adjust to individual
heating needs, providing comfortable, consistent temperature from
ceiling to floor
• Quiet operation
• Sealed combustion – protects indoor air quality
• No ductwork required
• Approved for use in high altitudes of
up to 10,200 feet
• Furnace automatically shuts down if vent is obstructed or blocked
• Child safety lock
• Consistently monitors room
temperature 2” off the floor
• Accurately detects temperature
changes less than one degree
Rinnai Response
Modulation Technology
• Electronic ignition – no pilot light
• Wind tunnel tested venting systems
• On-board self diagnostics for easier maintenance
Modulating technology
replaces only the heat escaping
the structure by continuously
operating at heating levels
based on the current demand,
which leads to lower gas usage
and higher levels of comfort.
• Within 10 seconds, the Rinnai
wall furnace begins to gently heat the
room at low fan speed
• It increases fan speed and BTU
output if necessary to achieve the
desired temperature
• Once the desired temperature is
achieved, the furnace goes into
standby mode
Continuous-Run Modulating Technology
74° F
72° F
70° F
68° F
66° F
Gas Usage
Gas Usage
Gas Usage
Room Monitoring
Newly Designed, User Friendly
With the new user-friendly control panel, you can choose
a set temperature or program the timers to take total
control over your heating needs.
Venting Made Safe and Easy
Rinnai venting uses outside air which improves indoor air quality. It is easy to install
and can be vented up to 13 feet.
Product Applications
Enjoy comfortable heat in any type of:
• Room Addition or Sunroom
• Multifamily Housing
• Basement Remodel
• Condo or Loft
• Cabin, Lake or Vacation Home
EX08C / EX11C
(ideal output for
smaller areas)
EX17C
(ideal output for
mid-sized areas)
EX22C / EX22CW
(EX22CW shown)
(ideal output for mid to
larger-sized areas)
ES38
(ideal output for mid to
larger-sized areas)
Discrete Vent
Terminal,
only 4” in
diameter
Direct, Through-Wall
Vent Termination
Through-Wall Vent
Termination
with Extension Kit
• Electric-to-Gas Conversion Project
• Manufactured and Mobile Homes
For illustration only. Please reference the Owner’s Manual for installation requirements.
Through-Wall Vent
Termination
with Extension Kit
and Elbow
• As the temperature of the room
gradually drops, the wall furnace
restarts and gradually warms the room
back to the desired temperature
• If there is a sudden injection
of cold air, the furnace automatically
adjusts fan speed and BTUs to
quickly restore the set temperature
PRODUCT SPECIFICATIONS
Model Number
Gas
Type
Input Range (BTU)
(Low/High)
EX08C (RHFE202FTA)
Beige only
NG
EX11C (RHFE265FTA)
Beige only
NG
5,500 / 11,000
81%
LP
5,700 / 11,000
82%
EX17C (RHFE434FTA)
Beige only
NG
NG
EX22CW (RHFE559FTA-W)
White
ES38 (RHFE1004RFA)
Beige
NG
ES38W (RHFE1004RFA-W)
White
LP
48
96.4 / 128.5
110.5 / 141.3
82%
81%
29 7/8” x 22 7/8” x 10 1/8”
73
36 5/8” x 26 3/8” x 13”
125
82%
10,500 / 38,400
ENERGY-EFFICIENT DIRECT VENT WALL FURNACES
80.6%
230.4 / 360.5
10,500 / 36,500
82.0%
* This specification is for shipping weight.
Accessories for Flexible Installations
Product Warranty
• 10 years on the heat exchanger
• 5 years on parts
• 2 years on labor
VENT TERMINATIONS
CONVERSION KITS
Part
Number
Model
Description
FOT-150
S Vent (3” – 4 1/2”)
FOT-151
A Vent (4 1/2” - 9 1/2”)
FOT-152
B Vent (9 1/2” - 15 3/4”)
FOT-153
C Vent (15 3/4” – 23 5/8”)
FOT-154
D Vent (23 5/8” – 31 1/2”)
To NG
To LP
EX08C
204000033
204000037
EX11C
204000034
204000038
EX17C
204000035
204000039
EX22C /
EX22CW
204000036
204000040
ACCESSORIES
MODEL
EXTENSION KITS
COVER KITS
FOT-155
FOT-156
FOT-157
FOT-158
FOT-201
•
•
•
•
•
EX17C
•
•
•
•
EX17C / EX17CW
•
•
•
•
EX11C
FOT-219
ES38
FOT-220
FOT-221
FOT-102
FOT-140
FOT-141
FOT-142
•
•
•
•
•
•
•
•
•
•
•
•
FOT-103
•
FOT-114
•
FOT-115
•
FOT-132
•
FOT-133
•
FOT-134
•
Rinnai is continually updating and improving products; therefore, specifications are subject to change without prior notice. Local, state, provincial and federal codes must be adhered to prior to and upon installation.
FOR MORE INFORMATION ON RINNAI PRODUCTS
ADDITIONAL RINNAI LITERATURE AVAILABLE
CONDENSING BOILERS
RINNAI INTELLIGENT
FIREPLACES
RINNAI HYDRONIC
FURNACES
Rinnai America Corporation
103 International Drive
Peachtree City, GA 30269
Toll Free 1-800-621-9419
Phone: 678-829-1700 • Fax: 678-364-8643
Visit our Web site: www.rinnai.us
E-mail: marketing@rinnai.us
R-CNHT-E-01 r6 © 2010 Rinnai America Corporation 40M-08/2010
ENERGYSAVER® DIRECT VENT WALL FURNACES
A NEW APPROACH TO HEATING
110.5 / 162.7
8,200 / 20,700
LP
Wt.
(lbs.)*
18 1/4” x 27 3/8” x 10 1/8”
81%
8,200 / 21,500
Dimensions
(W x H x D)
48.3 / 78.6
83%
8,200 / 16,700
LP
Fan CFM Output
(Low / High)
82%
3,000 / 8,000
LP
EX22C (RHFE559FTA)
Beige
AFUE
Rating
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising