HP | ProLiant ML150 | QuickSpecs | HP ProLiant ML150 QuickSpecs

HP ProLiant ML150 QuickSpecs
QuickSpecs
HP ProLiant ML150 Generation9 (Gen9)
Overview
HP ProLiant ML150 Generation9 (Gen9)
The HP ProLiant ML150 Gen9 Server delivers the essential mix of performance, price and expandability to fit the needs of growing budget
conscious businesses. Designed as a dual-socket tower server, it is a right size tower with performance and expandability. With expansion
options, it allows you to grow as needed with a low initial capital outlay. Covering a wide range of applications and workloads and addressing
our customers from sophisticated SMB to large enterprise class server environments.
Front view details for Rack (SFF) and Tower (LFF)
1.
2.
3.
4.
5.
6.
Drive Cage (4 LFF shown) Alternative server choice
would offer 8 SFF
Drive Cage (4 LFF shown) Alternative server choice
would offer 8 SFF
USB 3.0 (2)
Media bay, Optional SATA 9.5mm DVD-ROM shown.
Media bay, blank shown.*
NOTE: *Optional choices: SATA 9.5mm DVD-ROM or DVD
RW Optical Drive, Tape Drive, or LFF.
NOTE: When populating 10 LFF, not able to install Tape
Drive or Optical Drive. Possible Configurations: 1) 8LFF
+1 ODD + 1 Tape Drive (Full/Half), or 2) 9LFF + 1 ODD, or
3) 9LFF + 1 Tape Drive (Full/Half).
Media bay, blank shown.*
NOTE: *Optional choices: SATA 9.5mm DVD-ROM or DVD
RW Optical Drive, Tape Drive, or LFF.
NOTE: When populating 10 LFF, not able to install Tape
Drive or Optical Drive. Possible Configurations: 1) 8LFF
c04447841 – DA – 15090 North America — Version 1 — December 1, 2014
Page 1
QuickSpecs
HP ProLiant ML150 Generation9 (Gen9)
Overview
7.
8.
9.
+1 ODD + 1 Tape Drive (Full/Half), or 2) 9LFF + 1 ODD, or
3) 9LFF + 1 Tape Drive (Full/Half).
Power On/Standby button and system power LED
button
NIC status
Health LED
Rear View (Tower Model)
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
PCI Slots (Slots 1-6) Slot 1 and 3 can support Optional
GPU
Unit ID LED
USB 2.0 (2)
USB 3.0 (2)
Video Connector
HP 550W Power Supply
Power supply Power LED
Power Supply Power connection
Cable tie back
Network RJ-45 Ports (2)
c04447841 – DA – 15090 North America — Version 1 — December 1, 2014
Page 2
QuickSpecs
HP ProLiant ML150 Generation9 (Gen9)
Overview
Interior View (Rack Model)
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Power Supply
Sixteen (16) DDR4 DIMM slots. Shown fully populated in
16 slots (8 per processor)
System Fans: Three fans for 2P SKU
Internal USB 3.0 connector
Internal USB 2.0 connector
Two (2) processors and heatsinks with HP Smart Socket
Guide (Second Processor is Optional)
Gen9 Smart Storage Battery Holder Kit
MicroSD slot
Dedicated iLO module slot
Six (6) PCIe expansion slots
c04447841 – DA – 15090 North America — Version 1 — December 1, 2014
Page 3
QuickSpecs
HP ProLiant ML150 Generation9 (Gen9)
Standard Features
NOTE: For more information regarding Intel Xeon processors, please see the following http://www.intel.com/xeon.
Intel® Xeon® processor E5-2600 v3 product family is designed to deliver the best combination of performance, built-in capabilities, and costeffectiveness. One (or two) of the following Intel® Xeon® E5-2600 v3 processors based on the model.
Processor
One of the following
depending on model
Model
CPU frequency
Cores
L3 Cache
Power
QPI
DDR4 Hz
E5-2650Lv3
1.8GHz
12
30MB
65W
9.6GT/s
2133
E5-2640v3
2.6GHz
8
20MB
90W
8.0GT/s
1866
E5-2630v3
2.4Ghz
8
20MB
85W
8.0GT/s
1866
E5-2620v3
2.4GHz
6
15MB
85W
8.0GT/s
1866
E5-2609v3
1.9GHz
6
15MB
85W
6.4GT/s
1600
E5-2603v3
1.6GHz
6
15MB
85W
6.4GT/s
1600
NOTE: Up to 2 processors supported. Mixing different processor models is not supported.
NOTE: Recommend to select 900W for 2P configuration or check power advisor for power consumption for the customer
usage case.
Cache Memory
One of the following
depending on model
15MB (1 x 15MB) Level 3
NOTE: For Six-core processors.
20MB (1 x 20MB) Level 3
NOTE: For Eight-core processors.
30MB (1 x 30MB) Level 3
NOTE: For Twelve-core processors.
Chipset
Intel® C610 Series Chipset
Intel® E5-2600v3 Processor Family
NOTE: For more information regarding Intel® chipsets, please see the following URL:
http://www.intel.com/products/server/chipsets/.
On System
HP iLO (Firmware HP iLO4 2.0) 2GB NAND
Management Chipset NOTE: 1GB USB user space configurable via UEFI and accessible via iLO. Read and learn more in the iLO
QuickSpecs.
Memory
Type:
HP SmartMemory
DDR4 Registered (RDIMM) or Load Reduced (LRDIMM)
DIMM Slots Available
16
Maximum Capacity (LRDIMM) 256GB (16 x 16GB LRDIMM @2133MHz)
Maximum Capacity (RDIMM)
256GB (16 x 16GB RDIMM @2133MHz)
NOTE: This server does not support mixing LRDIMMs or RDIMMs. Attempting to mix any combination of these
DIMMs can cause the server to halt during BIOS installation.
Memory Protection
Advanced ECC
Online spare
Advanced ECC uses single device data correction to detect and correct single and all
multi-bit error that occurs within a single DRAM chip.
Memory online spare mode detects a rank that is degrading and switches operation
to the spare rank.
Expansion Slots
Expansion Technology Bus Width Connector Bus Number
Slots #
Width
6
PCIe 3.0
x8
x8
5
PCIe 3.0
x16
x16
4
PCIe 3.0
x8
x8
3
PCIe 3.0
x16
x16
2
PCIe 3.0
x8
x8
1
PCIe 3.0
x8
x8
Form Factor
Half Length/Full Height
Full Length/Full Height
Half Length/Full Height
Full Length/Full Height
Half Length/Full Height
Half Length/Full Height
c04447841 – DA – 15090 North America — Version 1 — December 1, 2014
Notes
For processor 1
For processor 1
For processor 1
For processor 2
For processor 1
For processor 2
Page 4
QuickSpecs
HP ProLiant ML150 Generation9 (Gen9)
Standard Features
NOTE: Bus number - Default bus assignment (in decimal). Inserting cards with PCI bridges may alter the actual bus
assignment number.
NOTE: Six total expansion PCIe 3.0 slots. Two PCIe 3.0 x16 (x16 speed); Four PCIe 3.0 x 8 (x8 speed).
Expansion Technology Bus Width Connector Bus Number Device
Form Factor
Notes
Slots #
Width
Number
7
HP ML Gen9
x1
x1
Dedicate for ML
Dedicated
Series
iLO Port Kit
Storage Controller
One of the following
depending on model
Entry Models
HP Dynamic Smart Array B140i Controller
NOTE: B140i can't mix with any standup internal controller.
Base Models
HP Dynamic Smart Array B140i Controller
NOTE: B140i can't mix with any standup internal controller.
Performance Models
HP H240 FIO Smart Host Bus Adapter
Internal Storage
Devices
One of the following
depending on model
Optical Drive
Hard Drives
Hard Drive Bays
Maximum Internal
Storage
One of the following
depending on model
Power Supply
One of the following
depending on model
Optional SATA 9.5mm DVD-ROM Optical Drive
Optional SATA 9.5mm DVD RW Optical Drive
NOTE: Optical is optional in entry, base and performance models.
NOTE: ML150 Gen9 Slim ODD Enablement Kit (PN: 784603-B21) is required for any
DVD options.
None ship standard
Up to 10 Non-hot plug SATA 3.5" drives
NOTE: Mixing drive cage types is not allowed.
NOTE: All Pre-configured Models come populated with hard drive blanks installed.
The 4LFF configurations includes 2 blanks and 8SFF includes 6 blanks. Additional
hard drive blanks can be ordered using either P/N 666986-B21 for the HP LFF HDD
Blank Kit or P/N 666987-B21 for the HP SFF HDD Blank Kit. These part numbers for
single HDD blanks below are also provided should you require replacement HDD
blanks for your server.
NOTE: NHP SATA is limited to B140i controller.
NOTE: When populate 10 LFF, not able to install any Tape Drive and Optical
Drive. Possible Configurations: 1) 8LFF +1 ODD + 1 Tape Drive (Full/Half), or 2) 9LFF +
1 ODD, or 3) 9LFF + 1 Tape Drive (Full/Half).
NOTE: Must select two 4LFF NHP drive cage and 10LFF enablement kit if customer
wants to support 10 LFF drives.
(4) Hot plug LFF SAS/SATA HDD bays; upgradable to (8)
(8) Hot plug SFF SAS/SATA HDD bays; upgradable to (16)
NOTE: 16SFF is limited to P840 controller.
NOTE: H240 8LFF/8SFF require 2 cable kit P/N: 784606-B21.
NOTE: P840 16SFF require 2 cable kit P/N: 784608-B21.
Hot Plug LFF SAS
Hot Plug LFF SATA
Hot Plug SFF SAS
Hot Plug SFF SATA
Non-Hot Plug LFF SATA
Hot Plug LFF SAS SSD
Hot Plug LFF SATA SSD
Hot Plug SFF SAS SSD
Hot Plug SFF SATA SSD
CAPACITY
60TB
60TB
19.2TB
16TB
30TB
16TB
16TB
25.6TB
25.6TB
CONFIGURATION
10 x 6TB
10 x 6TB
16 x 1.2TB
16 x1TB
10 x 3TB
10 x 1.6TB
10 x 1.6TB
16 x 1.6TB
16 x 1.6TB
HP 550W FIO Power Supply
HP 800W/900W Gold AC Power Input Module
c04447841 – DA – 15090 North America — Version 1 — December 1, 2014
Page 5
QuickSpecs
HP ProLiant ML150 Generation9 (Gen9)
Standard Features
HP Entry-Level Power Supplies provide lower-cost options for customers trying to balance their need for enterprise
class efficiency and reliability while maintaining lowest possible hardware costs. All Entry-Level power supply
options have been designed specifically for HP ProLiant Gen9 Essential Series servers.
The HP 550W FIO Power Supply is the standard, non-redundant AC power supply option for most HP ProLiant Gen9
Essential servers. It features Silver-level (89%) certified power efficiency with a set of features optimized for the
Gen9 Essential-series rack and tower servers.
The HP 800W Gold (Redundant)/900W (Non-Redundant) AC Power Input Module with Power Backplane can be
configured to support power redundancy in ProLiant servers that offer only a single power supply bay, providing
additional protection against power loss. With an 80 Plus Gold power efficiency rating (up to 92%), this power
option helps to reduce operating expenses while protecting against trapped power capacity in the data center. Each
power backplane option can support up to two (2) hot-plug AC power input modules.
All pre-configured servers ship with a standard 6-foot IEC C-13/C-14 jumper cord (A0K02A). This jumper cord is also
included with each standard AC power supply option kit. If a different power cord is required, please check the
ProLiant Power Cables web page.
To review the power requirements for your selected system, please use the HP Power Advisor Tool located at
http://www.hp.com/go/hppoweradvisor.
Power specifications and technical content for all HP Server power supplies can be found at
http://www.hp.com/go/proliant/powersupply.
Rack Options
One of the following
depending on model
HP T/R CONV TRAY UNIVERSAL Kit
System Fans
One of the following
depending on model
Non-redundant
Redundant
1P model
2 fans
NA
NOTE: Two (2) Non-hot plug, non-redundant fans ship as standard.
Non-redundant
Redundant
2P model
3 fans
NA
NOTE: Third fan is shipped with 2nd CPU Kit. Third fan is only required in 2P configurations.
Interfaces
Video
1 (rear)
Network RJ-45 (Ethernet)
2
HP iLO Remote Management Network 2 Gb Dedicated
Port
Micro SD Slot
1 (internal)
NOTE: The Micro-SD slot is not a hot-pluggable device. Customers should not attempt to plug a Micro-SD card
into the Micro-SD slot while the server is powered.
USB 3.0
5 (2 rear, 1 internal, 2 front )
USB 2.0
3 (2 rear, 1 internal)
Operating Systems
Microsoft Windows Server
and Virtualization
Canonical Ubuntu
Software Support for Red Hat Enterprise Linux (RHEL)
ProLiant Servers
SUSE Linux Enterprise Server (SLES)
VMware
Oracle Solaris
NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization
Software and latest listing of software drivers available for your server, please visit our Support Matrix at:
http://www.hp.com/go/ossupport and our driver download page http://www.hp.com/support/ML150Gen9.
Upgradeability
Upgradeable to two processors (24 cores)
NOTE: Total 6, 8, 12cores.
Up to 16 SFF Hard Drive Bays; Or 10 LFF Hard Drive Bays
c04447841 – DA – 15090 North America — Version 1 — December 1, 2014
Page 6
QuickSpecs
HP ProLiant ML150 Generation9 (Gen9)
Standard Features
Up to 16 DIMM slots
Redundant Power Supply
Tower to rack conversion
Optional optical drive (up to 1)
NOTE: When populate 10 LFF, not able to install Optical Drive. Possible Configurations: 1) 8LFF +1 ODD + 1 Tape Drive
(Full/Half), or 2) 9LFF + 1 ODD, or 3) 9LFF + 1 Tape Drive (Full/Half).
Industry Standard
Compliance
ACPI 2.0b Compliant
PCIe 3.0 Compliant
PXE Support
WOL Support
Novell Certified
IPMI 2.0, SMASH CLP, DCMI 1.0 compliant
Microsoft® Logo certifications
USB 3.0 Support
SMBIOS 2.7.1
ASHRAE A3
Graphics
HP NVIDIA Quadro K2200 GPU Module
HP Server
UEFI/Legacy ROM
HP Server UEFI /Legacy ROM
Unified Extensible Firmware Interface (UEFI) is an industry standard that provides better manageability and more
secured configuration while interacting with your server at boot time. HP ProLiant Gen9 platform defaults to UEFI
and can be factory or field configured for Legacy BIOS Boot Mode.
NOTE: The UEFI System Utilities function is analogous to the HP ROM-Based Setup Utility (RBSU) of legacy BIOS. For
more information, please visit http://www.hp.com/go/proliantuefi/docs.
UEFI enables numerous new capabilities specific to HP ProLiant servers such as:
 Secure Boot

Operating system specific functionality

Support for > 2.2 TB (using GPT) boot drives

USB 3.0 Stack

Embedded UEFI Shell

Mass Configuration Deployment Tool using HP RESTful API.

PXE boot support for IPv6 networks

Boot support for option cards that only support a UEFI option ROM
For more information please visit http://www.hp.com/go/proliant/uefi.
NOTE: For UEFI Boot Mode, boot environment and OS image installations should be configured properly to support
UEFI.
NOTE: HP UEFI FIO Setting (758959-B22) can be selected to configure the system in Legacy mode in the factory.
Form Factor
Tower or Rack (5U)
Embedded
Management
HP Integrated
Lights-Out (HP iLO)
Monitor your servers for ongoing management, service alerting, reporting and remote
management with HP iLO. Learn more at http://www.hp.com/go/ilo.
UEFI
Configure and boot your servers securely with industry standard Unified Extensible
Firmware Interface (UEFI). Learn more at http://www.hp.com/go/ProLiant/uefi.
HP RESTful API
RESTful API is an application programming interface. RESTful Web Service API served by
iLO’s web server: Learn more at http://www.hp.com/go/restfulapi.
c04447841 – DA – 15090 North America — Version 1 — December 1, 2014
Page 7
QuickSpecs
HP ProLiant ML150 Generation9 (Gen9)
Standard Features
Server utilities
Intelligent
Provisioning
Provision servers by discovering and deploying 1 to few servers with Intelligent
Provisioning. Learn more at http://www.hp.com/go/intelligentprovisioning.
Embedded Remote
Support
HP’s embedded remote support, when used with Insight Online direct connect or HP
Insight Remote Support, allows HP ProLiant servers to transmit hardware events
directly to HP or an HP Authorized Partner for automated phone home support. Learn
more at http://www.hp.com/go/insightonline/info.
HP Smart Update
Optimize firmware and driver updates with HP Smart Update solutions. Learn more at
http://www.hp.com/go/smartupdate.
HP Systems Insight
Manager (HP SIM)
HP SIM allows you to monitor the health of your HP ProLiant Servers and HP Integrity
Servers, and also provides you with basic support for non-HP servers.
HP SIM also integrates with HP SUM to provide quick and seamless firmware updates.
Learn more at http://www.hp.com/go/sim.
Scripting Tool Kit and Provision 1 to many servers using your own scripts to discover and deploy them with HP
Windows PowerShell Scripting Tool Kit for Windows and Linux or HP Scripting Tools for Windows PowerShell.
Learn more at http://www.hp.com/go/ProLiantSTK or http://www.hp.com/go/powershell.
HP RESTful Interface HP RESTful Interface tool is a scripting tool to provision servers using RESTful API
Tool
Interface to discover and deploy servers at scale. Learn more at
http://www.hp.com/go/restfulapi.
HP iLO Mobile
Application
Enables the ability to access, deploy, and manage your server anytime from anywhere
from select smartphones and mobile devices. For additional information please visit:
http://www.hp.com/go/ilo/mobileapp.
HP Insight Online
HP Insight Online, available at no additional cost as part of your HP warranty, Care Pack or
contractual support agreement with HP, is a personalized dashboard for simplified
tracking of IT operations and support information from anywhere, anytime. Learn more at
http://www.hp.com/go/insightonline/info.
NOTE: The Service Pack for ProLiant (which includes HP SUM) can be downloaded from
http://www.hp.com/go/spp/download. More information can be found: http://www.hp.com/go/SmartUpdate,
http://www.hp.com/go/spp and http://www.hp.com/go/hpsum.
Security
Power-on password
Setup password
Serial interface control
Power switch security
Administrator's password
TPM 1.2
UEFI
Warranty
This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP
Authorized Channel Partners resellers. Hardware diagnostic support and repair is available for three years from date
of purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to
warranty services are available through HP Care Pack services or customized service agreements. Hard drives have
either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
NOTE: Server Warranty includes 3-Year Parts, 1-Year Labor, 1-Year Onsite support with next business day response.
Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two
categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when
customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but
may involve added complexity. Customers may choose to have HP replace Optional CSR parts at no charge. Additional
information regarding worldwide limited warranty and technical support is available at:
http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html.
c04447841 – DA – 15090 North America — Version 1 — December 1, 2014
Page 8
QuickSpecs
HP ProLiant ML150 Generation9 (Gen9)
Optional Features
Embedded
Management
iLO Essentials
HP iLO Essentials is the preferred license for small and medium business that offers full
remote server management capabilities for small and medium business via the
Integrated Remote Console (IRC), virtual media, and e-mail based alerts. Learn more
about HP iLO Essentials at http://www.hp.com/go/iLO/essentials.
iLO Scale-Out
HP iLO Scale-Out is the preferred license built for web hosting, cloud service providers,
and high performance computing data centers, managing massive scale out
environments. This license offers sophisticated scripting tools that provides remote
access through Text Console via SSH, Dynamic power capping, Email-based Alerting and
proactive notifications. For more information, visit http://www.hp.com/go/iLO/scale-out.
iLO Advanced
HP iLO Advanced licenses offer smart remote functionality without compromise, for all HP
ProLiant servers. The license includes the full integrated remote console, virtual keyboard,
video, and mouse (KVM), multi-user collaboration, console record and replay, and GUI-based
and scripted virtual media and virtual folders. You can also activate the enhanced security
and power management functionality. Learn more about HP iLO Advanced at
http://www.hp.com/go/iloadvanced.
Server Management
HP Insight Control HP Insight Control, lets you deploy, migrate, monitor, remote control, and optimize your IT
infrastructure through a single, simple management console. For more information, see
http://www.hp.com/go/insightcontrol.
High Performance
Clusters
HP Insight Cluster Management Utility (CMU) is an HP-licensed and HP-supported suite of tools that are used for
lifecycle management of hyperscale clusters of Linux ProLiant systems. CMU includes software for the centralized
provisioning, management and monitoring of nodes. CMU makes the administration of clusters user friendly,
efficient, and effective. http://www.hp.com/go/cmu.
HP Cluster Platforms are specifically engineered, factory-integrated large-scale ProLiant clusters optimized for
High Performance Computing, with a choice of servers, networks and software. Operating system options include
specially priced offerings for Red Hat Enterprise Linux and SUSE Linux Enterprise Server, as well as Microsoft
Windows HPC Server. A Cluster Platform Configurator simplifies ordering. http://www.hp.com/go/clusters.
HPC Interconnects
NOTE: High Performance Computing (HPC) interconnect technologies are available for this server under the HP
Cluster Platform product portfolio. These high-speed interconnects are fully supported by HP when they are part of
these configure to order clusters. Solutions can be defined with a lot of flexibility with the help of configuration
tools. Please visit the following URL to configure HPC Clusters with InfiniBand Interconnects:
http://www.hp.com/techservers/clusters/ucp/index.html.
Storage Software
Whether you need to solve a specific data protection, archiving, or storage command and control challenge, or
deliver on strategic consolidation, compliance, or continuity initiatives, look no further than HP storage software.
Our storage software helps you reduce costs, simplify storage infrastructure, protect vital assets and respond
faster to business opportunities.
Storage software that gets the job done:




Data Protection and Recovery Software
Whether you're a large enterprise or a smaller business, HP data protection and recovery software will
cost-effectively protect you against disaster and ensure business continuity.
Data Archive and Migration Software
HP's storage software enables you to comply with data retention and retrieval requirements, improve
application performance, and reduce costs by efficiently migrating infrequently accessed or less
valuable data to lower cost storage.
Storage Resource Management Software (SRM)
HP's storage resource management software reduces operational costs and provides the command and
control foundation you need to efficiently manage and visualize your physical and virtual
environments.
Data Replication Software
HP offers array-based and host-based replication software for use in disaster recovery, testing,
application development and reporting.
c04447841 – DA – 15090 North America — Version 1 — December 1, 2014
Page 9
QuickSpecs
HP ProLiant ML150 Generation9 (Gen9)
Optional Features


Storage Device Management Software
Maximize your investment in HP storage and networking with software that enables hardware-specific
configuration, performance tuning and connectivity management.
HP StoreVirtual VSA
With HP StoreVirtual VSA you can use the power of virtualization to create a virtual array within your
host server. Manage it as a single pool of shared storage capacity, and scale it to match your evolving
needs. HP ProLiant Gen9 servers include a 3-year limited license for HP StoreVirtual VSA software with
1TB of capacity at no extra cost. Simply select to install HP StoreVirtual VSA software during server
setup within Intelligent Provisioning. More information, instructional videos, and free console
management software are available at http://www.hp.com/go/vsa1TB.
NOTE: For more information about Storage Software including QuickSpecs, please see:
http://www.hp.com/go/storage/software.
One Config Simple
(SCE)
SCE is a guided self-service tool to help sales and non-technical people provide customers with initial configurations in
3 to 5 minutes. You may then send the configuration on for configuration help, or use in your existing ordering
processes. If you require "custom" rack configuration or configuration for products not available in SCE, please contact
HP's Customer Business Center or an Authorized Partner for assistance. http://www.hp.com/products/configurator.
c04447841 – DA – 15090 North America — Version 1 — December 1, 2014
Page 10
QuickSpecs
HP ProLiant ML150 Generation9 (Gen9)
Service and Support
Service and Support
HP Technology Services for Industry Standard Servers
HP Technology Services delivers confidence, reduces risk and helps customers realize agility and stability. Connect to
HP to help prevent problems and solve issues faster. Our support technology lets you to tap into the knowledge of
millions of devices and thousands of experts to stay informed and in control, anywhere, any time.
Protect your business beyond warranty with HP Care Pack Services
HP Care Pack Services enable you to order the right service level, length of coverage and response time as you
purchase your new server, giving you full entitlement for the term you select.
Optimized Care
Supports maintaining servers at optimum performance availability
HP Proactive Care with 24x7 coverage, three year Care Pack Service
HP Proactive Care helps prevent problems and stabilize IT by utilizing secure, real-time, predictive analytics and
proactive consultations when your products are connected to HP. This Care Pack Service combines three years’
proactive reporting and advice with our 24x7 coverage and enhanced escalation management, four hour hardware
response time and two hour call back for software questions on leading industry standard software running on your
HP ProLiant server. http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA3-8855ENW.pdf
Standard Care
Package
Supports maintaining high level of server availability
Foundation Care 24x7, three-year Care Pack Service
HP Foundation Care 24x7 connects you to HP 24 hours a day, seven days a week for assistance on resolving issues.
Hardware onsite response within four hours if needed; collaborative software included in this Care Pack service
provides troubleshooting assistance on industry leading software running on your HP server. Simplify your support
experience and make HP your first call for hardware or software questions.
http://h20195.www2.hp.com/V2/GetDocument.aspx?docname=4AA4-8876ENW&cc=us&lc=en
Related Services
HP ProLiant Server Hardware Installation
Provides for the basic hardware installation of HP branded servers, storage devices and networking options to assist
you in bringing your new hardware into operation in a timely and professional manner.
http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-9356EN.pdf
Factory Express for Servers and storage
HP Factory Express offers configuration, customization, integration and deployment services for HP servers and
storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped and
deployed. For more information on Factory Express services for your specific server model please contact your sales
representative or go to: http://www.hp.com/go/factory-express.
Data Privacy Services
Protect your data through better media management. HP Data privacy services help manage and protect sensitive
data to reduce the risk of unauthorized access to private information and help meet compliance requirements. Our
retention services allow you to keep drives and other devices upon failure, our removal services provide convenient
data sanitization and our recovery services allow you to safely retire IT assets and capture any remaining value from
the hardware. http://www.hp.com/services/dataprivacy
Additional HP Care Pack services can be found at: http://www.hp.com/go/cpc
Get connected to HP to Prevent problems with innovative, automated monitoring tools and proactive services. Combining Proactive Care
improve your support Services with our remote support technology such as Insight Online provides you with expert advice and personalized,
experience
cloud-based automated IT support, helping to prevent unplanned down time and solve problems quickly. For more
information, visit: http://www.hp.com/go/proactiveinsightexperience
HP Support Center
Personalized online support portal with access to information, tools and experts to support HP business products.
Submit support cases online, chat with HP experts, access support resources or collaborate with peers. Learn more
http://www.hp.com/go/hpsc
HP's Support Center Mobile App** allows you to resolve issues yourself or quickly connect to an agent for live support.
Now, you can get access to personalized IT support anywhere, anytime.
c04447841 – DA – 15090 North America — Version 1 — December 1, 2014
Page 11
QuickSpecs
HP ProLiant ML150 Generation9 (Gen9)
Service and Support
HP Insight Remote Support and HP Support Center are available at no additional cost with a HP warranty, HP Care Pack
or HP contractual support agreement.
** HP Support Center Mobile App is subject to local availability.
Parts and Materials
HP will provide HP-supported replacement parts and materials necessary to maintain the
covered hardware product in operating condition, including parts and materials for available
and recommended engineering improvements.
Parts and components that have reached their maximum supported lifetime and/or the
maximum usage limitations as set forth in the manufacturer's operating manual, product
quick-specs, or the technical product data sheet will not be provided, repaired, or replaced as
part of these services.
The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives replaced by HP
due to malfunction.
For more information To learn more on HP ProLiant servers, please contact your HP sales representative or HP Authorized Channel Partner
or visit: http://www.hp.com/services/proliant
c04447841 – DA – 15090 North America — Version 1 — December 1, 2014
Page 12
QuickSpecs
HP ProLiant ML150 Generation9 (Gen9)
Pre-configured Models
For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory Integrated Models" section.
1. Pre-configured models ship with the configurations below. Options can be selected from the Core or Additional options section of this QuickSpecs.
2. HP does not allow factory integration of options into pre-configured models. Any additional options purchased will be shipped separately.
3. If you desire a custom configuration please see "Configuration Information - Factory Integrated Models" section of this QuickSpecs.
NOTE: All Pre-configured Models come populated with some hard drive blanks installed. Should the customer need additional hard drive blanks, they
can order more using either P/N 666987-B21: HP SFF Hard Drive Blank Kit or P/N 666986-B21: HP LFF Hard Drive Blank Kit.
NOTE: All pre-configured servers ship with a standard 6-foot IEC C-13/C-14 jumper cord (A0K02A). This jumper cord is also included with each standard
AC power supply option kit. If a different power cord is required, please check the ProLiant Power Cables web page.
Caution: HP recommends that a minimum of two people are required for all Rack Server installations. Please refer to your installation instructions for
proper tools and number of people to use for any installation.
[SKU Number]
Model Name
Processor
Number of Processors
Memory
Network Controller
Storage Controller
Hard Drive
Internal Storage
Optical Drive Bay
Optical Drive
PCI-Express Slots
Power Supply
Fans
Management
Form Factor
Warranty
[SKU Number]
Model Name
Processor
Number of Processors
Memory
Network Controller
Storage Controller
Hard Drive
Internal Storage
Optical Drive Bay
Optical Drive
PCI-Express Slots
Power Supply
Fans
Management
Form Factor
Entry Models
Base Models
776274-001
776275-001
HP ProLiant ML150 Gen9 E5-2603v3 4GB B140i HP ProLiant ML150 Gen9 E5-2609v3 8GB B140i
Non-hot Plug 4LFF SATA Entry 550W PS Server
Hot Plug 4LFF SATA Base 550W PS Server
Intel® Xeon® E5-2603v3
Intel® Xeon® E5-2609v3
One
4GB (1x4GB Registered DIMMs, 2133 MHz)
8GB (1x8GB Registered DIMMs, 2133 MHz)
Broadcom 5717 Dual-port 1GbE
HP Dynamic Smart Array B140i
None ship standard
4 LFF HDD Bays (Non Hot Plug)
4 LFF HDD Bays
1; (Optional: DVD-ROM, DVD-RW)
Optional Slim Optical Bay (SATA DVD-RW/ROM Optical Drive)
6 PCIe slots
(1) HP 550W FIO Power Supply
2 non-hot plug, non-redundant fans
Mid-tier iLO with 2GB NAND
Tower (5U)
Server Warranty includes 3-Year Parts, 1-Year Labor, 1-Year Onsite support with next business
day response.
Performance Models
776276-001
HP ProLiant ML150 Gen9 E5-2620v3 16GB H240 Hot Plug 8SFF SAS Perf 900W PS Server
Intel® Xeon® E5-2620v3
One
16GB (1x16GB Registered DIMMs, 2133 MHz)
Broadcom 5717 Dual-port 1GbE
HP H240 Smart Host Bus Adapter
NOTE: HP ML150 Gen9 PCI BAFFLE Kit (779861-B21) is included while order Performance Model
with H240 Storage Controller
None ship standard
8 SFF HDD Bays
1; (Optional: DVD-ROM, DVD-RW)
Optional Slim Optical Bay (SATA DVD-RW/ROM Optical Drive)
6 PCIe slots
(1) HP 900W FIO Power Supply
2 non-hot plug, non-redundant fans
Mid-tier iLO with 2GB NAND
Tower (5U)
c04447841 – DA – 15090 North America — Version 1 — December 1, 2014
Page 13
QuickSpecs
HP ProLiant ML150 Generation9 (Gen9)
Pre-configured Models
Warranty
Server Warranty includes 3-Year Parts, 1-Year Labor, 1-Year Onsite support with next business
day response.
c04447841 – DA – 15090 North America — Version 1 — December 1, 2014
Page 14
QuickSpecs
HP ProLiant ML150 Generation9 (Gen9)
Configuration Information - Factory Integrated Models
This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP
recommends the use of an HP approved configurator. Contact your local sales representative for information on configurable product offerings and
requirements.
1. Factory Integrated Models must start with a CTO Server.
2. FIO indicates that this option is only available as a factory installable option.
3. All Factory Integrated Models will be populated with sufficient hard drive blanks based on the number of initial hard drives ordered with the server.
4. Some options may not be integrated at the factory. Contact your local sales representative for additional information.
Step 1: Base Configuration (choose one of the following configurable models)
[Chassis]
SKU Number
Processor
DIMM Slots
Storage
Controller
PCIe
Drive Cage
Network
Controller
Fans
Management
USB
HP ProLiant ML150 Gen9 Non-hot HP ProLiant ML150 Gen9 Hot Plug
HP ProLiant ML150 Gen9 Hot Plug
Plug 4LFF Configure-to-order
4LFF Configure-to-order Server
8SFF Configure-to-order Server
Server
767062-B21
767063-B21
767064-B21
2 (optional) x HP Smart Socket Guides
16 DIMM slots for RDIMM, LRDIMM DDR4 Memory
HP Dynamic Smart Array B140i
4LFF Non Hot Plug
6 Standard (4FH/HL, 2FH/FL)
4LFF Hot Plug
Broadcom 5717 Dual-port 1GbE
8LFF Hot Plug
2 non-hot plug, non-redundant fans
Mid-tier iLO with 2GB NAND
2 front, 2 internal, 4 rear
Step 2: Choose Required Options (only one of the following from each list unless otherwise
noted)
HP Processors
HP Memory
Entry Processors - E5-2600v3 series Processors
HP ML150 Gen9 Intel® Xeon® E5-2603v3 (1.6GHz/6-core/15MB/85W) FIO Processor Kit
HP ML150 Gen9 Intel® Xeon® E5-2609v3 (1.9GHz/6-core/15MB/85W) FIO Processor Kit
Base Processors - E5-2600v3 series Processors
HP ML150 Gen9 Intel® Xeon® E5-2620v3 (2.4GHz/6-core/15MB/85W) FIO Processor Kit
HP ML150 Gen9 Intel® Xeon® E5-2630v3 (2.4GHz/8-core/20MB/85W) FIO Processor Kit
HP ML150 Gen9 Intel® Xeon® E5-2640v3 (2.6GHz/8-core/20MB/90W) FIO Processor Kit
Performance Processors - E5-2600v3 series Processors
HP ML150 Gen9 Intel® Xeon® E5-2650Lv3 (1.8GHz/12-core/30MB/65W) FIO Processor Kit
NOTE: If two processors are desired, select one xxxxxx-L21 and one xxxxxx-B21.
NOTE: Up to two processors are supported. Mixing different processor models is not supported.
NOTE: DDR4 speed is the maximum memory speed of the processor. Actual memory speed may
depend on the quantity and type of DIMMs installed.
NOTE: For the Intel® C600 Chipset E5-2600 Series, the letter preceding the model number
indicates the Product Line (E3, E5, E7); 2600x v#, 2 = number of CPUs in a Node, 6 is
socket/segment designation, 00 = Processor SKU, x = L for low power SKUs and v# (not yet
designated) = version number.
Registered DIMMs (RDIMMs) for E5-2600v3 Series
HP 4GB (1x4GB) Single Rank x8 DDR4-2133 CAS-15-15-15 Registered Memory Kit
HP 8GB (1x8GB) Single Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory Kit
HP 8GB (1x8GB) Dual Rank x8 DDR4-2133 CAS-15-15-15 Registered Memory Kit
HP 16GB (1x16GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory Kit
Load Reduced DIMMs (LRDIMMs) for E5-2600v3 Series
HP 16GB (1x16GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Load Reduced Memory Kit
c04447841 – DA – 15090 North America — Version 1 — December 1, 2014
726663-L21
726660-L21
726657-L21
726653-L21
726650-L21
726667-L21
726717-B21
726718-B21
759934-B21
726719-B21
726720-B21
Page 15
QuickSpecs
HP ProLiant ML150 Generation9 (Gen9)
Configuration Information - Factory Integrated Models
NOTE: LRDIMM, RDIMM are all distinct memory technologies and cannot be mixed within a server.
The majority of ProLiant Gen9 servers support LRDIMM and RDIMM.
NOTE: HP memory from previous generation servers are not qualified or warranted with this HP
ProLiant Server. HP SmartMemory is required to realize the memory performance improvements
and enhanced functionality listed in this document for Gen9.
NOTE: If only one processor is installed, only half of the total DIMM slots are available. When
populating with two processors all DIMM slots are available.
NOTE: Kits described as LP include Low Power DIMMs. For more information on ProLiant Energy
Efficient Features, see: http://www.hp.com/go/proliant-energy-efficient.
NOTE: Depending on the memory configuration and processor model, the memory speed may run
at 2133MHz, 1866MHz, 1600MHz, or 1333MHz. Please see Memory Population Table or the Online
Memory Configuration Tool at: http://www.hp.com/go/ddr4config.
HP Power Supplies
HP Storage Controllers
HP Entry-Level Power Supplies
HP 550W FIO Power Supply Kit
NOTE: The above power supply option is 80Plus Silver-certified with an efficiency rating of up to
89%. Power specifications and technical content for all HP Server power supplies can be found
at http://www.hp.com/go/proliant/powersupply.
HP 800W Gold (Redundant)/900W (Non-Redundant) AC Power Input Module
NOTE: The above power supply option is 80Plus Gold-certified with an efficiency rating of up to
92%. Each power backplane kit (745813-B21) can support up to two (2) AC power input modules
(744689-B21). Power specifications and technical content for all HP Server power supplies can
be found at http://www.hp.com/go/proliant/powersupply.
NOTE: HP 800W/900W Gold AC Power Input Module only support up to maximum 800W
redundant with 2 x 900W power module.
NOTE: Must select power backplane along with 900W power module:
900w power module x 1 requires 900W power backplane x 1 (Non-redundant PSU)
900w power module x 2 requires 900W power backplane x 1 (Redundant PSU)
NOTE: Recommend to select 900W for 2P configurations or check power advisor for power
consumption for the customer usage case. Power specifications and technical content for all HP
Server power supplies can be found at http://www.hp.com/go/proliant/powersupply.
HP Server Redundant Power Supply Backplane Kit
NOTE: Each power backplane kit (745813-B21) can support up to two (2) AC power input
modules (744689-B21). HP Server Redundant Power Supply Backplane Kit is required if selecting
P/N: 744689-B21.
730941-B21
744689-B21
745813-B21
NOTE: If not using the embedded B140i controller as primary controller, must select one of the following HP Storage
Controllers noted below to support SAS drives depending on CTO Server model selected in Step 1.
HP Smart Array Controllers
HP Smart Array P440/4GB FBWC 12Gb 1-port Int FIO SAS Controller
761872-B21
NOTE: If HP ProLiant ML150 Gen9 4LFF CTO Server (PN: 767063-B21) or HP ProLiant ML150 Gen9 8SFF CTO Server
(PN: 767064-B21) is selected in Step 1.
NOTE: Must also select Smart Storage Battery Holder Kit (PN: 786710-B21).
NOTE: Must also select one HP ML150 Gen9Mini SAS P440/P840 Cable Kit (PN: 784606-B21).
NOTE: Must also select one HP ML150 Gen9 PCI BAFFLE Kit (779861-B21).
HP Smart Array P840/4GB FBWC 12Gb 2-ports Int FIO SAS Controller
761874-B21
NOTE: If HP ProLiant ML150 Gen9 8SFF CTO Server (PN: 767064-B21) is selected in Step 1.
NOTE: This controller is required if HP ML150 Gen9 8SFF Hot Plug Drive Cage (PN: 725874-B21) is selected.
NOTE: Must also select Smart Storage Battery Holder Kit (PN: 786710-B21).
NOTE: Must also select two HP ML150 Gen9Mini SAS P440/P840 Cable Kits (PN: 784606-B21).
NOTE: Must also select one HP ML150 Gen9 PCI BAFFLE Kit (779861-B21).
HP Smart Host Bus Adapters
HP H240 12Gb 2-ports Int FIO Smart Host Bus Adapter
761873-B21
NOTE: If HP ProLiant ML150 Gen9 4LFF CTO Server (PN: 767063-B21) or HP ProLiant ML150 Gen9 8SFF CTO Server
(PN: 767064-B21) is selected in Step 1.
NOTE: Must also select one HP ML150 Gen9 Mini SAS H240 Cable Kit (PN: 784606-B21) to support the HP ProLiant
ML150 Gen9 4LFF CTO Server or two Cable Kits (PN: 784606-B21) to support HP ProLiant ML150 Gen9 8SFF CTO
Server or if adding HP ML150 Gen9 4LFF Hot Plug Drive Cage (PN: 725872-B21).
HP Cable Options
c04447841 – DA – 15090 North America — Version 1 — December 1, 2014
Page 16
QuickSpecs
HP ProLiant ML150 Generation9 (Gen9)
Configuration Information - Factory Integrated Models
HP ML150 Gen9 Mini SAS H240 Cable Kit
HP ML150 Gen9 Mini SAS P440/P840 Cable Kit
Battery Holder
HP ML150 Gen9 Smart Storage Battery Holder Kit
784606-B21
784608-B21
786710-B21
Step 3: Choose Additional Factory Integratable Options
BIOS Mode
HP Legacy FIO Mode Setting
NOTE: If B140i is the only primary controller, then this option cannot be selected.
NOTE: Selecting this option will change the default UEFI BIOS setting into Legacy BIOS setting.
758959-B21
Controller State
HP Mfg FIO Enable HBA Mode Setting
NOTE: Can only be selected with H240 FIO Smart Host Bus Adapter
NOTE: If H240 is the primary controller then RAID is not allowed with this selection.
HP AHCI-Enable FIO Setting
NOTE: If B140i is the primary controller then RAID is not allowed with this selection.
792962-B21
801845-B21
Step 4: Choose Additional Options for Factory Integration from Core and Additional Options
sections below.
c04447841 – DA – 15090 North America — Version 1 — December 1, 2014
Page 17
QuickSpecs
HP ProLiant ML150 Generation9 (Gen9)
Core Options
NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP recommends the use of an HP approved
configurator. Contact your local sales representative for additional information.
HP Unique Options
HP ML150 Gen9 4LFF Hot Plug Drive Cage
725872-B21
NOTE: Adding 4LFF Hard Drive Cage allow up to 8FF Drive Bays.
HP Processors
HP Memory
HP ML150 Gen9 8SFF Hot Plug Drive Cage
NOTE: Adding 8SFF Hard Drive backplane allow up to 16SFF Drive Bays.
725874-B21
HP ML150 Gen9 4LFF Non-hot Plug Drive Cage
NOTE: Adding 4LFF Hard Drive Cage allow for up to 8LFF Drive Bays.
779859-B21
HP ML150 Gen9 PCI Baffle Kit
NOTE: Must select when a PCIe card is installed with any Networking, Controllers (SAS, SCSI
and Fiber Channel), Graphic options.
HP ML150 Gen9 Slim ODD Enablement Kit
NOTE: Must select with the ODD option.
779861-B21
HP ML150 Gen9 Smart Storage Battery Holder Kit
NOTE: Must select when install Smart Store Battery PN: 727258-B21.
NOTE: Must select when install P440/840 FIO controller PN: 761872-B21/761874-B21.
NOTE: Must select when support upgrade battery.
786710-B21
HP ML150 Gen9 9/10LFF Drive Enablement Kit
NOTE: When populate 10 LFF, not able to install any Tape Drive or Optical Drive. Possible
Configurations: 1) 8LFF +1 ODD + 1 Tape Drive (Full/Half), or 2) 9LFF + 1 ODD, or 3) 9LFF + 1
Tape Drive (Full/Half).
NOTE: Must select both 4LFF NHP drive cage and 10LFF enablement kit if plan to expand to
10LFF.
NOTE: Only support NHP SATA HDD.
NOTE: Must select P840/4G controller.
788567-B21
HP ML150 Gen9 Dedicated iLO Management Port Kit
HP ML150 Gen9 Mini SAS H240 Cable Kit
NOTE: Must be selected for H240 controller.
1 cable kit is required for Hot Plug 4LFF.
2 cable kits are required for below:
- Hot Plug 4+4 LFF (with additional drive cage)
- 8SFF
HP ML150 Gen9 Mini SAS P440/P840 Cable Kit
NOTE: Must be selected for P440/P840 controller.
1 cable kit is required for P440x1.
2 cable kits are required for P840x1.
HP Tower to Rack Conversion Tray Universal Kit
780310-B21
784606-B21
Entry Processors - E5-2600v3 series Processors
HP ML150 Gen9 Intel® Xeon® E5-2603v3 (1.6GHz/6-core/15MB/85W) Processor Kit
HP ML150 Gen9 Intel® Xeon® E5-2609v3 (1.9GHz/6-core/15MB/85W) Processor Kit
Base Processors - E5-2600v3 series Processors
HP ML150 Gen9 Intel® Xeon® E5-2620v3 (2.4GHz/6-core/15MB/85W) Processor Kit
HP ML150 Gen9 Intel® Xeon® E5-2630v3 (2.4GHz/8-core/20MB/85W) Processor Kit
HP ML150 Gen9 Intel® Xeon® E5-2640v3 (2.6GHz/8-core/20MB/90W) Processor Kit
Performance Processors - E5-2600v3 series Processors
HP ML150 Gen9 Intel® Xeon® E5-2650Lv3 (1.8GHz/12-core/30MB/65W) Processor Kit
NOTE: Recommend to select 900W for 2P configurations or check power advisor for power
consumption for the customer usage case.
784603-B21
784608-B21
417705-B21
726663-B21
726660-B21
726657-B21
726653-B21
726650-B21
726667-B21
Registered DIMMs (RDIMMs) for E5-2600v3 Series
HP 4GB (1x4GB) Single Rank x8 DDR4-2133 CAS-15-15-15 Registered Standard Memory Kit
HP 8GB (1x8GB) Single Rank x4 DDR4-2133 CAS-15-15-15 Registered Standard Memory Kit
HP 4GB (1x4GB) Single Rank x8 DDR4-2133 CAS-15-15-15 Registered Memory Kit
HP 8GB (1x8GB) Single Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory Kit
c04447841 – DA – 15090 North America — Version 1 — December 1, 2014
803026-B21
803028-B21
726717-B21
726718-B21
Page 18
QuickSpecs
HP ProLiant ML150 Generation9 (Gen9)
Core Options
HP 8GB (1x8GB) Dual Rank x8 DDR4-2133 CAS-15-15-15 Registered Memory Kit
HP 16GB (1x16GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory Kit
Load Reduced DIMMs (LRDIMMs) for E5-2600v3 Series
759934-B21
726719-B21
HP 16GB (1x16GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Load Reduced Memory Kit
726720-B21
HP Optical Drives
HP 9.5mm SATA DVD-ROM JackBlack Gen9 Optical Drive
HP 9.5mm SATA DVD-RW JackBlack G9 Optical Drive
HP ML150 Gen9 Slim ODD Enablement Kit
NOTE: Must be selected with the ODD option.
NOTE: Must select ODD enablement kit, one kit per ODD.
726536-B21
726537-B21
784603-B21
HP Drives
NOTE: User may select any combination of SAS or SATA Hard Drives. However, if RAID is selected and both SAS and SATA
Hard Drives have been selected, then only the SAS Drives will be used in the RAID set.
NOTE: If B140i is the primary controller, user can only select SATA drives.
NOTE: User may select any combination of SAS or SATA Hard Drives.
However, if RAID is selected and both SAS and SATA Hard Drives have been selected, then only the SAS Drives will be used
in the RAID set.
NOTE: SAS drives require the selection of a SAS controller. See card lists in Controllers section.
SAS Hot Plug SFF (2.5-inch) Enterprise (ENT) Drives
HP 1.2TB 6G SAS 10K rpm SFF (2.5-inch) SC Dual Port Enterprise 3yr Warranty Hard Drive
718162-B21
HP 900GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
652589-B21
HP 600GB 12G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
759212-B21
HP 600GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
652583-B21
HP 450GB 12G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
759210-B21
HP 450GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
652572-B21
HP 300GB 12G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
759208-B21
HP 300GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
652564-B21
HP 146GB 6G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
652605-B21
SAS Hot Plug SFF (2.5-inch) Midline (MDL) Drives
HP 500GB 6G SAS 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive
HP 1TB 6G SAS 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive
SAS Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives
HP 450GB 12G SAS 15K rpm LFF (3.5-inch) SC Converter Enterprise 3yr Warranty Hard Drive
HP 300GB 12G SAS 15K rpm LFF (3.5-inch) SC Converter Enterprise 3yr Warranty Hard Drive
HP 600GB 12G SAS 15K rpm LFF (3.5-inch) SC Converter Enterprise 3yr Warranty Hard Drive
SAS Hot Plug LFF (3.5-inch) Midline (MDL) Drives
652745-B21
652749-B21
HP 6TB 6G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
HP 4TB 6G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
HP 3TB 6G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
HP 2TB 6G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
HP 1TB 6G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
SATA Hot Plug SFF (2.5-inch) Midline (MDL) Drives
761477-B21
695510-B21
652766-B21
652757-B21
652753-B21
HP 1TB 6G SATA 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive
HP 500GB 6G SATA 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive
SATA Hot Plug LFF (3.5-inch) Midline (MDL) Drives
HP 6TB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
HP 4TB 6G SATA 7.2k rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
HP 3TB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
HP 2TB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
HP 1TB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
655710-B21
655708-B21
c04447841 – DA – 15090 North America — Version 1 — December 1, 2014
737394-B21
737261-B21
765424-B21
753874-B21
693687-B21
628061-B21
658079-B21
657750-B21
Page 19
QuickSpecs
HP ProLiant ML150 Generation9 (Gen9)
Core Options
HP 500GB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
SATA Non-Hot Plug LFF (3.5-inch) Midline (MDL) Drives
658071-B21
HP 3TB 6G SATA 7.2K rpm LFF (3.5-inch) Non-hot plug Midline 1yr Warranty Hard Drive
HP 1TB 6G SATA 7.2K rpm LFF (3.5-inch) Non-hot plug Midline 1yr Warranty Hard Drive
HP 2TB 6G SATA 7.2K rpm LFF (3.5-inch) Non-hot plug Midline 1yr Warranty Hard Drive
HP 500GB 6G SATA 7.2K rpm LFF (3.5-inch) Non-hot plug Midline 1yr Warranty Hard Drive
12G SAS Hot Plug SFF (2.5-inch) Enterprise Performance Solid State Drives
628065-B21
659337-B21
659339-B21
659341-B21
HP 800GB 12G SAS High Endurance SFF 2.5-in SC Enterprise Performance 3yr Wty Solid
State Drive
HP 400GB 12G SAS High Endurance SFF 2.5-in SC Enterprise Performance 3yr Wty Solid
State Drive
HP 200GB 12G SAS High Endurance SFF 2.5-in SC Enterprise Performance 3yr Wty Solid
State Drive
12G SAS Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State Drives
741159-B21
HP 800GB 12G SAS Mainstream Endurance SFF 2.5-in SC Enterprise Mainstream 3yr Wty
Solid State Drive
HP 400GB 12G SAS Mainstream Endurance SFF 2.5-in SC Enterprise Mainstream 3yr Wty
Solid State Drive
HP 200GB 12G SAS Mainstream Endurance SFF 2.5-in SC Enterprise Mainstream 3yr Wty
Solid State Drive
12G SAS Hot Plug SFF (2.5-inch) Enterprise Value Solid State Drives
741146-B21
HP 1.6TB 12G SAS Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty Solid State Drive
HP 800GB 12G SAS Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty Solid State
Drive
12G SAS Hot Plug LFF (3.5-inch) Enterprise Value Solid State Drives
762263-B21
762261-B21
HP 800GB 12G SAS Value Endurance LFF 3.5-in SC Enterprise Value 3yr Wty Solid State
Drive
HP 1.6TB 12G SAS Value Endurance LFF 3.5-in SC Enterprise Value 3yr Wty Solid State Drive
6G SATA Hot Plug LFF (3.5-inch) Enterprise Light G1 Solid State Drives
762270-B21
HP 960GB 6G SATA Light Endurance LFF 3.5-in SC Converter ENT Light 3yr Wty G1 Solid
State Drive
6G SATA Hot Plug SFF (2.5-inch) Enterprise Value Solid State Drives
756604-B21
HP 1.6TB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty Solid State
Drive
HP 480GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty G1 Solid State
Drive
HP 240GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty G1 Solid State
Drive
HP 120GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty G1 Solid State
Drive
6G SATA Hot Plug SFF (2.5-inch) Enterprise Light G1 Solid State Drives
757339-B21
HP 960GB 6G SATA Light Endurance SFF 2.5-in SC Enterprise Light 3yr Wty G1 Solid State
Drive
6G SATA Hot Plug LFF Value Endurance (3.5-inch) Converter Enterprise Value G1
Solid State Drives
756601-B21
HP 1.6TB 6G SATA Value Endurance LFF 3.5-in SC Converter Enterprise Value 3yr Wty Solid
State Drive
HP 480GB 6G SATA Value Endurance LFF 3.5-in SC Converter ENT Value 3yr Wty G1 Solid
State Drive
HP 240GB 6G SATA Value Endurance LFF 3.5-in SC Converter ENT Value 3yr Wty G1 Solid
State Drive
HP 120GB 6G SATA Value Endurance LFF 3.5-in SC Converter ENT Value 3yr Wty G1 Solid
State Drive
757342-B21
c04447841 – DA – 15090 North America — Version 1 — December 1, 2014
741155-B21
741151-B21
741142-B21
741138-B21
762272-B21
756657-B21
756636-B21
756621-B21
756660-B21
756639-B21
756624-B21
Page 20
QuickSpecs
HP ProLiant ML150 Generation9 (Gen9)
Core Options
Hard Drive Blank Kits
HP Large Form Factor Hard Drive Blank Kit
HP Small Form Factor Hard Drive Blank Kit
HP Networking
HP Power Supplies
1 Gigabit Ethernet adapters
HP Ethernet 1Gb 4-port 331T Adapter
HP Ethernet 1Gb 2-port 361T Adapter
HP Ethernet 1Gb 2-port 332T Adapter
10 Gigabit Ethernet adapters
HP Ethernet 10Gb 2-port 560SFP+ Adapter
HP Ethernet 10Gb 2-port 561T Adapter
666986-B21
666987-B21
647594-B21
652497-B21
615732-B21
665249-B21
716591-B21
HP Entry-Level Power Supplies
HP Server Redundant Power Supply Backplane Kit
HP 800W Gold (Redundant)/900W (Non-Redundant) AC Power Input Module
NOTE: The above power supply option is 80Plus Gold-certified with an efficiency rating of
up to 92%. Each power backplane kit (745813-B21) can support up to two (2) AC power
input modules (744689-B21). Power specifications and technical content for all HP Server
power supplies can be found at http://www.hp.com/go/proliant/powersupply.
NOTE: HP 800W/900W Gold AC Power Input Module only support up to maximum 800W
redundant with 2 x 900W power module.
NOTE: Must select power backplane along with 900W power module:
900w power module x 1 requires 900W power backplane x 1 (Non-redundant PSU)
900w power module x 2 requires 900W power backplane x 1 (Redundant PSU)
NOTE: Recommend to select 900W for 2P configurations or check power advisor for power
consumption for the customer usage case. Power specifications and technical content for
all HP Server power supplies can be found at
http://www.hp.com/go/proliant/powersupply.
745813-B21
744689-B21
HP Computation and HP NVIDIA Quadro K2200 Graphics Accelerator
J0G89A
Graphics Accelerators NOTE: Must select 2 processor if 2 graphic cards are selected.
NOTE: Must select 900W power supply when 2 graphic cards are selected.
NOTE: Only the above listed Graphics cards are HP standard supported options in this server.
NOTE: The NVIDIA Quadro modules are supported only on 64-bit versions of Linux and Windows operating systems
as well as on Virtual Machine client operating systems. The supported bare metal operating systems are RHEL6,
SLES 11 and Windows Server 2012 R2.
NOTE: Please see the HP Power Advisor for estimated power consumption of your individual system configuration
prior to installing GPUs. The HP Power Advisor is located at: http://www.hp.com/go/hppoweradvisor.
HP Cooling Options
HP ML150 Gen9 PCI Baffle Kit
NOTE: Must be selected when a PCIe card is installed with any Networking, Controllers
(SAS, SCSI and Fiber Channel), Graphic options.
c04447841 – DA – 15090 North America — Version 1 — December 1, 2014
779861-B21
Page 21
QuickSpecs
HP ProLiant ML150 Generation9 (Gen9)
Additional Options
NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP recommends the use of an HP approved
configurator. Contact your local sales representative for additional information.
Embedded
HP iLO Advanced
Management
HP iLO Advanced 1 Server License with 3yr 24x7 Tech Support and Updates
BD505A
HP iLO Advanced including 1yr 24x7 Technical Support and Updates E-LTU
HP iLO Advanced including 1yr 24x7 Technical Support and Updates Single Server License
HP iLO Advanced including 3yr 24x7 Technical Support and Updates E-LTU
HP iLO Essentials
HP Integrated Lights-Out Essentials including 3yr 24x7 Tech Support and Updates Single
Svr License
HP Integrated Lights-Out Essentials including 1yr 24x7 Tech Support and Updates Single
Svr License
HP Integrated Lights-Out Essentials including 3yr 24x7 Technical Support and Updates E-LTU
HP Integrated Lights-Out Essentials including 1yr 24x7 Technical Support and Updates E-LTU
High Performance
Clusters
HP Storage
Controllers
E6U59ABE
512485-B21
E6U64ABE
BD774A
BD775A
E6U61ABE
E6U62ABE
HP Insight Cluster Management Utility
HP Insight Cluster Management Utility 3yr 24x7 Flexible License
HP Insight Cluster Management Utility 1yr 24x7 Flexible License
NOTE: These part numbers can be used to purchase one certificate for multiple licenses
and support with a single activation key. Each license is for one node (server). Customer
will receive a printed end user license agreement and license entitlement certificate via
physical shipment. The license entitlement certificate must be redeemed online in order to
obtain a license key. Customer also will receive a support agreement.
HP Insight Cluster Management Utility Media
BD476A
QL803B
BD477A
SAS Controller
HP Smart Array P440/4GB FBWC 12Gb 1-port Int SAS Controller
HP Smart Array P441/4GB FBWC 12Gb 2-ports Ext SAS Controller
HP Smart Array P840/4GB FBWC 12Gb 2-ports Int SAS Controller
NOTE: B140i can't mix with any standup internal controller.
NOTE: HP ML150 Gen9Mini SAS P440/P840 Cable Kit must be selected PN: 784606-B21 for
P440 controller (1 cable kit is required for P440x1).
NOTE: HP ML150 Gen9 PCI BAFFLE Kit (779861-B21) is required while order controller card.
NOTE: B140i can't mix with any standup internal controller.
NOTE: Must select P840/4G Controller when apply 16SFF.
NOTE: HP ML150 Gen9Mini SAS P440/P840 Cable Kit must be selected PN: 784606-B21 for
P840 controller (2 cable kits are required for P840x1).
NOTE: HP ML150 Gen9 PCI BAFFLE Kit (779861-B21) is required while order controller card.
SAS Controller Options
726821-B21
726825-B21
726897-B21
HP 96W Smart Storage Battery with 145mm Cable for DL/ML/SL Servers
HP Host Bus Adapter
727258-B21
HP H240 12Gb 2-ports Int Smart Host Bus Adapter
726907-B21
HP H241 12Gb 2-ports Ext Smart Host Bus Adapter
726911-B21
NOTE: Must select for H240 controller.
1 cable kit is required for Hot Plug 4LFF.
2 cable kits are required for below:
- Hot Plug 4+4 LFF (with additional drive cage)
- 8SFF
NOTE: If H240 is the primary controller and if HP Mfg FIO Enable HBA Mode Setting is selected, then RAID is not
allowed.
NOTE: B140i can't mix with any standup internal controller.
NOTE: HP ML150 Gen9 PCI BAFFLE Kit (779861-B21) is required while order controller card.
HP Cable Options
HP ML150 Gen9 Mini SAS H240 Cable Kit
c04447841 – DA – 15090 North America — Version 1 — December 1, 2014
784606-B21
Page 22
QuickSpecs
HP ProLiant ML150 Generation9 (Gen9)
Additional Options
HP Tape Backup
HP Power
Distribution Units
(PDUs)
HP ML150 Gen9 Mini SAS P440/P840 Cable Kit
Battery Holder
784608-B21
HP ML150 Gen9 Smart Storage Battery Holder Kit
786710-B21
NOTE: For the complete range of tape drives, autoloaders, libraries and media see: http://www.hp.com/go/tape. For
hardware and software compatibility of HP tape backup products see: http://www.hp.com/storage/SPOCK and
http://www.hp.com/go/ebs.
NOTE: Must select SAS controller to support internal SAS tape drives.
NOTE: Tape drive and HDD total amount can't exceed SAS controller support qty.
Tape Drives
HP StoreEver 1/8 G2 LTO-6 Ultrium 6250 FC Tape Autoloader
HP StoreEver LTO-6 Ultrium 6250 Tape Drive in 1U Rack-mount Kit
HP StoreEver LTO-4 Ultrium 1760 SAS (1) in 1U Rack-mount Kit
HP StoreEver LTO-5 Ultrium 3000 SAS Tape Drive in 1U Rack-mount
HP StoreEver LTO-5 Ultrium 3280 SAS Tape Drive in 3U Rack-mount
HP StoreEver 1U SAS Rack-mount Kit
HP StoreEver LTO-6 Ultrium 6650 SAS Internal Tape Drive
HP StoreEver LTO-6 Ultrium 6650 SAS External Tape Drive
HP StoreEver LTO-6 Ultrium 6250 Internal Tape Drive
HP StoreEver LTO-5 Ultrium 3000 SAS Internal Tape Drive
HP StoreEver LTO-5 Ultrium 3000 SAS External Tape Drive
HP StoreEver LTO-5 Ultrium 3280 SAS Internal Tape Drive
HP StoreEver LTO-5 Ultrium 3280 SAS External Tape Drive
HP StoreEver LTO-6 Ultrium 6250 External Tape Drive
HP StoreEver LTO-4 Ultrium 1760 SAS Internal WW Tape Drive
HP StoreEver LTO-4 Ultrium 1760 SCSI External Tape Drive
HP StoreEver LTO-3 Ultrium 920 SCSI External Tape Drive
HP Mini-SAS Cable for LTO Internal Tape Drive
HP Mini-SAS Cable for DAT Internal Tape Drive
HP Tape Storage Systems HP StoreEver MSL6480
C0H19A
C0L99A
EH946C
EJ014B
EJ013B
AE459B
EH963A
EH964A
EH969A
EH957B
EH958B
EH899B
EH900B
EH970A
EH919B
EH922B
EH842B
AP746A
AP747A
HP StoreEver MSL6480 Scalable Expansion Module
HP StoreEver MSL6480 Scalable Base Module
HP MSL2024 0-Drive Tape Library
HP MSL4048 0-Drive Tape Library
QU626A
QU625A
AK379A
AK381A
HP Basic Power Distribution Unit (bPDU)
HP 1.9kVA 120 Volt L5-20 Input (12xNEMA 5-20R) NA/JP Basic PDU
HP 3.6kVA 200-240 Volt Detachable C20 Input ( 12xC13) WW Basic PDU
HP 2.8kVA 120 Volt L5-30 Input (18xNEMA 5-20R) NA/JP Basic PDU
HP 3.6kVA 200-240 Volt Detachable C20 Input (18xC13) WW Basic PDU
HP 4.9kVA 208 Volt L6-30 Input (20xC13) NA/JP Basic PDU
HP 8.6kVA 208 Volt L15-30 3-Phase Input (18xC13) NA/JP Basic PDU
HP 4.9kVA 208 Volt L6-30 Input (24xC13/6xC19) NA/JP Basic PDU
HP 8.3kVA 208 Volt CS8265C Input (30xC13/6xC19) NA/JP Basic PDU
HP Hardwired 200-240 Volt Input (30xC13/6xC19) WW Basic PDU
HP 5.7kVA 208 Volt L21-20 3-Phase Input (24xC13/3xNEMA 5-20R) NA/JP Basic PDU
HP 8.6kVA 208 Volt L21-30 3-Phase Input (24xC13/3xC19/3xNEMA 5-20R) NA/JP Basic
PDU
HP 8.6kVA 208 Volt L15-30 3-Phase Input (24xC13/6xC19) NA/JP Basic PDU
HP 11kVA 400 Volt IEC309 30A 3-Phase Input (36xC13/6xC19) NA Basic PDU
c04447841 – DA – 15090 North America — Version 1 — December 1, 2014
H5M54A
H5M56A
H5M55A
H5M57A
H5M58A
H5M61A
H5M59A
H5M60A
H5M75A
H5M63A
H5M64A
H5M62A
H5M67A
Page 23
QuickSpecs
HP ProLiant ML150 Generation9 (Gen9)
Additional Options
HP 13.2kVA 480 Volt IEC309 30A 3-Phase Input (15 Outlet) NA Basic PDU
H3X07A
HP 19.9kVA 480 Volt IEC309 30A 3-Phase Input (30 Outlet) NA Basic PDU
H3X08A
HP 800VA - 277V Input / 230V Output NA Rack Mount Transformer
H3X09A
HP 2.8kVA 24A Low Voltage NA/JP Modular Power Distribution Unit
252663-D71
HP 4.9kVA 24A High Voltage NA/JP Core Modular Power Distribution Unit
252663-D74
HP 8.3kVA 40A High Voltage NA/JP Core Modular Power Distribution Unit
252663-D75
HP 8.6kVA 24A Three Phase NA/JP Modular Power Distribution Unit
AF512A
HP 14.4kVA 40A Three Phase NA/JP Modular Power Distribution Unit
AF519A
HP 17.3kVA 48A Three Phase NA/JP Modular Power Distribution Unit
AF511A
NOTE: To learn more about HP Basic Power Distribution Units (bPDU), please visit the HP website at
http://www.hp.com/go/pdu.
HP Monitored Power Distribution Units (mPDU)
HP 2.8kVA 120 Volt L5-30 Input (12xNEMA 5-20R)NA/JP Monitored PDU
D9N43A
HP 3.6kVA 200-240 Volt Detachable C20 Input (12xC13) WW Monitored PDU
D9N46A
HP 4.9kVA 208 Volt L6-30 Input (12xC13) NA/JP Monitored PDU
D9N44A
HP 3.6kVA 200-240 Volt Detachable C20 Input (16xC13) WW Monitored PDU
D9N45A
HP 4.9kVA 208 Volt L6-30 Input (12xC13) NA/JP Monitored PDU
G9Z05A
HP 4.9kVA 208 Volt L6-30 Input (20xC13/4xC19) NA/JP Monitored PDU
D9N47A
HP 8.6kVA 208 Volt L15-30 3-Phase Input (18xC13/3xC19) NA/JP Monitored PDU
D9N51A
HP 5.7kVA 208 Volt L21-20 3-Phase Input (18xC13/3xNEMA 5-20R) NA/JP Monitored PDU
D9N52A
HP 8.6kVA 208 Volt L21-30 3-Phase Input (20xC13/3xC19/3xNEMA 5-20R) NA/JP
D9N53A
Monitored PDU
HP 8.3kVA 208 Volt CS8265C Input (30xC13/3xC19) NA Monitored PDU
D9N49A
HP 14.4kVA 208 Volt CS8365C 3-Phase Input (12xC13/12xC19)NA Monitored PDU
D9N58A
HP 16.6kVA 400 Volt IEC309 30A 3-Phase Input (30xC13/3xC19) NA Monitored PDU
D9N61A
HP 16.6kVA 400 Volt IEC309 30A 3-Phase Input (12xC13/12xC19) NA Monitored PDU
D9N62A
HP 17.3kVA 208 Volt IEC309 60A 3-Phase Input (24xC13/3xC19) NA/JP Monitored PDU
D9N54A
HP 17.3kVA 208 Volt IEC309 60A 3-Phase Input (12xC13/12xC19) NA/JP Monitored PDU
D9N59A
HP 17.3kVA 208 Volt IEC309 60A 3-Phase Watertight Input (12xC13/12xC19) NA/JP
G9Z07A
Monitored PDU
HP 19.9kVA 480 Volt 3-Phase (30 Outlet) NA Monitored PDU
D9N63A
HP Environmental Sensor for Remote Monitored PDUs
E2D53A
NOTE: Please see the HP Monitored Power Distribution Units QuickSpecs for information on
additional options and product specifications.
HP Intelligent Power Distribution Units (iPDU)
HP 4.9kVA 24A Single Phase NA/JP Core Intelligent Modular Power Distribution Unit
AF520A
HP 8.3kVA 40A Single Phase NA/JP Core Intelligent Modular Power Distribution Unit
AF521A
HP 8.6kVA 24A Three Phase NA/JP Core Intelligent Modular Power Distribution Unit
AF522A
HP 17.3kVA 48A Three Phase NA/JP Core Intelligent Modular Power Distribution Unit
AF523A
HP 11.4kVA 16A 415V Three Phase L22-20 NA Core Intelligent Power Distribution Unit
AF900A
HP 17.3kVA 24A 415V Three Phase IEC309 NA Core Intelligent Power Distribution Unit
AF901A
HP 17.3kVA 48A 208V Three Phase 12 Outlet Core NA/JP Intelligent Power Distribution Unit
AF535A
HP 17.3kVA 24A 415V Three Phase 12 Outlet Core NA/JP Intelligent Power Distribution Unit
AF537A
HP 4.9kVA 24A Single Phase NA/JP Intelligent Modular Power Distribution Kit
AF531A
HP 8.6kVA 24A Three Phase NA/JP Intelligent Modular Power Distribution Kit
AF532A
HP 14.4kVA 40A Three Phase NA/JP Intelligent Modular Power Distribution Unit
AF533A
HP 5xC13 Intelligent PDU Extension Bar G2 Kit
AF547A
HP 5xC13 Outlets Power and UID LEDs Pair Standard Extension Bar
AF528A
NOTE: Please see the HP Intelligent Power Distribution Units QuickSpecs for information on
additional options and product specifications.
c04447841 – DA – 15090 North America — Version 1 — December 1, 2014
Page 24
QuickSpecs
HP ProLiant ML150 Generation9 (Gen9)
Additional Options
HP Managed Power Distribution Units (maPDU)
HP 2.8kVA 120 Volt L5-30 Input (24x NEMA 5-20) NA/JP Managed PDU
HP 3.6kVA 200-240 Volt Detachable C20 Input (7xC13/1xC19) WW Managed PDU
HP 4.9kVA 208 Volt L6-30 Input (20xC13/4xC19) NA/JP Managed PDU
HP 8.6kVA 208 Volt L15-30 3 Phase Input (18xC13/6xC19) NA/JP Managed PDU
HP 8.6kVA 208 Volt L21-30 3 Phase Input (20xC13/3xC19/1x NEMA 5-20) NA/JP Managed
PDU
HP 14.4kVA 208V CS8365C 3 Phase Input (12xC13/12xC19) NA/JP Managed PDU
HP 17.3kVA 208V IEC309 60A 3 Phase Input (12xC13/12xC19) NA/JP Managed PDU
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
http://www8.hp.com/h20195/v2/GetHtml.aspx?docname=c04376687
NOTE: To learn more, please visit the HP Uninterruptible Power Systems (UPS) web page.
HP Rack Mount
Consoles, KVM
Switches, and
Keyboards
H8B48A
H8B49A
H8B50A
H8B52A
H8B53A
H8B55A
H8B56A
HP Rack Mount Consoles
HP TFT7600 G2 KVM Console Rackmount Keyboard US Monitor
HP TFT7600 G2 KVM Console Rackmount Keyboard US TAA Monitor
NOTE: Please see the HP Rack Console QuickSpecs for information on additional options
and product specifications.
HP KVM Switches
AZ870A
AZ885A
HP Server Console 0x2x8 Port Analog Switch
HP Server Console 0x2x16 Port Analog Switch
HP TAA 0x2x16xKVM Server Console G2 Switch
HP KVM Console USB Interface Adapter
HP 0x2x16 KVM Server Console Switch G2 with Virtual Media CAC Software
HP 0x2x32 KVM Server Console Switch G2 with Virtual Media CAC Software
HP KVM Console USB 2.0 Virtual Media CAC Interface Adapter
HP 1x4 USB/PS2 KVM Console Switch
HP 1x1Ex8 KVM IP Console Switch G2 with Virtual Media CAC Software
HP 2x1Ex16 KVM IP Console Switch G2 with Virtual Media CAC Software
HP 4x1Ex32 KVM IP Console Switch G2 with Virtual Media CAC Software
NOTE: To learn more, please visit the HP KVM Switches web page.
HP USB Keyboard and Mouse
AF616A
AF617A
AF626A
AF628A
AF618A
AF619A
AF629A
AF611A
AF620A
AF621A
AF622A
HP USB BFR with PVC Free US Keyboard/Mouse Kit
NOTE: Please see the HP USB Keyboard and Mouse QuickSpecs for information on
additional options and product specifications.
631341-B21
HP Uninterruptible
HP Rack-mountable UPS
Power Systems (UPS) HP R1500 G3 Uninterruptible Power Supply (UPS)
HP R1.5kVA G3 1U NA Uninterruptible Power System
HP R/T3000 Uninterruptible Power System (UPS)
AF469A
HP R/T3000 G2 2U L530 Low Voltage NA/JP Uninterruptible Power System
HP R/T3000 G2 2U L620 High Voltage NA/JP Uninterruptible Power System
R5000 Uninterruptible Power System (UPS)
AF466A
AF467A
HP R5KVA 3U L630 High Voltage NA/JP Uninterruptible Power System
R7000 Uninterruptible Power System (UPS)
AF460A
HP R7KVA 4U 50A High Voltage NA/JP Uninterruptible Power System
HP T750 G2 UPS Models
AF462A
HP T750 G2 750VA NA Tower Uninterruptible Power System
HP T1500 G3 UPS Models
HP T1500 G3 1400VA NA Tower Uninterruptible Power System
AF446A
c04447841 – DA – 15090 North America — Version 1 — December 1, 2014
AF450A
Page 25
QuickSpecs
HP ProLiant ML150 Generation9 (Gen9)
Additional Options
NOTE: To learn more, please visit the HP Uninterruptible Power Systems (UPS) web page.
HP USB and SD
Options
HP Enterprise Mainstream Flash Media Kits for Memory Cards
HP 8GB microSD Enterprise Mainstream Flash Media Kit
HP Care Pack Services Installation & Start-up Services
HP Install ProLiant ML350e Service
HP Startup ProLiant ML350e Service
Foundation Care
HP 3y 24x7 ML150 Gen9 FC Service
HP 3y 24x7 w/DMR ML150 Gen9 FC Service
HP 3y 24x7 w/CDMR ML150 Gen9 FC Service
Proactive Care
HP 3y 24x7 ML150 Gen9 PC Service
HP 3y 24x7 w/DMR ML150 Gen9 PC SVC
HP 3y 24x7 w/CDMR ML150 Gen9 PC SVC
c04447841 – DA – 15090 North America — Version 1 — December 1, 2014
726116-B21
U6D41E
U6D43E
U7WR1E
U7WR2E
U7WR3E
U7WT8E
U7WT9E
U7WU0E
Page 26
QuickSpecs
HP ProLiant ML150 Generation9 (Gen9)
Memory
Memory Subsystem
Architecture
Each Intel® Xeon® E5-2600v3 family processor socket contains four memory channels per installed processor with two
DIMMs per channel for a total of eight (8) DIMMs or a grand total of sixteen (16) DIMMs for the server.
Memory Population
guidelines
General Memory Population Rules and Guidelines:
. Install DIMMs only if the corresponding processor is installed.
. If only one processor is installed in a two processor system, only half of the DIMM slots are available.
. To maximize performance, it is recommended to balance the total memory capacity between all installed
processors and load the channels similarly whenever possible.
. When two processors are installed, balance the DIMMs across the two processors.
. White DIMM slots denote the first slot to be populated in a channel.
. Place the DIMMs with the highest number of ranks in the white slot when mixing DIMMs of different ranks on the
same channel.
. Do not mix RDIMMs or LRDIMMs.
. Quad rank RDIMMs are not supported in HP ProLiant ML350 Gen9 servers.
. Quad rank LRDIMMs are capable of up to three DIMMs per channel.
. RDIMMs operating at 1.2V.
. DIMMs of different speeds may be mixed in any order; the server will select a common optimal speed.
. The maximum memory speed is a function of the memory type, memory configuration, and processor model.
. The maximum memory capacity is a function of the memory type and number of installed processors.
. To realize the performance memory capabilities listed in this document, HP SmartMemory is required.
. There are four (4) channels per processor; eight (8) channels per server.
There are three (3) DIMM slots for each memory channel; twenty-four (24) total slots.
Memory channels1 and 3 consists of the three (3) DIMMs that are furthest from the processor.
Memory channel 2 and 4 consists of the three (3) DIMMs that are closest to the processor.
c04447841 – DA – 15090 North America — Version 1 — December 1, 2014
Page 27
QuickSpecs
HP ProLiant ML150 Generation9 (Gen9)
Memory
Intel Gen9 Supported Memory Bandwidth for HP ProLiant Gen9 Intel® Xeon®E5-2600v3 Series Processor Family
Memory Bandwidth and Capacity
[DIMM Type]
DIMM Rank
DIMM Capacity
4GB
Voltage
SLOTS THAT CAN BE
POPULATED
16 slot servers
MAXIMUM CAPACITY
(GB)
64
Single Rank
Dual Rank
8GB
Std Voltage 1.2V
16
128
1 DIMM Per Channel
2 DIMM Per Channel
256
2133
2133
DIMM slot and configuration
diagram
DIMM slot and configuration diagrams
• Population order; start with "A" first, "B" second, "C" third, etc.
• When one processor is installed, install DIMMs in sequential alphabetic order: A, B, C, D, E, F …
• When two processors are installed, install DIMMs in sequential
• alphabetic order: CPU1-A, CPU2-A,CPU1-B,CPU2-B,CPU1-C, CP2-C
Chnl 3
Chnl 4
Chnl 2
Chnl 1
Memory Speed by
Processor Model
Load Reduced
(LRDIMMs)
Dual Rack
16GB
Registered Dimms (RDIMMs)
CPU 1
Slot # population order
Slot #
1
2
1
2
C
G
CPU 1
Slot # population order
Slot #
3
4
3
4
D
H
CPU 1
Slot # population order
Slot #
5
6
5
6
F
B
CPU 1
Slot # population order
Slot #
7
8
7
8
E
A
Processor Models
E5-2603v3, E5-2609v3,
E5-2620v3, E5-2630v3, E5-2640v3,
E5-2650Lv3,
CPU 2
population order
A
E
Chnl 1
CPU 2
population order
B
F
Chnl 2
CPU 2
population order
H
D
Chnl 4
CPU 2
population order
G
C
Chnl 3
Supported Memory Speeds
1600MHz
1866MHz
2133MHz
c04447841 – DA – 15090 North America — Version 1 — December 1, 2014
Page 28
QuickSpecs
HP ProLiant ML150 Generation9 (Gen9)
Memory
Standard and
Maximum Memory
Capacity (Preconfigured Models)
Pre-Configured Models
Standard Memory
E5-2603v3,
E5-2609v3,
E5-2620v3,
4GB (1x4GB)
8GB (1x8GB)
16GB (1x16GB)
Maximum Memory Plus
Optional Memory
244GB (15x16GB, 1x4GB)
248GB (15x16GB, 1x8GB)
256GB (15x16GB, 1x16GB)
Standard Memory Replaced
with Optional Memory
256GB (16x16GB)
256GB (16x16GB)
256GB (16x16GB)
DDR4 memory options part number decoder
NOTE: Capacity references are rounded to the common gigabyte (GB) values.
 4GB = 4,096MB
 8GB = 8,192MB
 16GB = 16,384MB
1.
2.
3.
4.
5.
6.
7.
Capacity: 4GB/8GB/16GB/32GB
Rank: 1R = Single-rank; 2R = Dual-rank; 4R = Quad-rank
Data width: x4 = 4-bit; x8 = 8-bit
Memory generation: DDR4
Maximum memory speed: 2133 MT/s
CAS latency: P = 15
DIMM type: R = RDIMM (registered); L = LRDIMM (load reduced)
c04447841 – DA – 15090 North America — Version 1 — December 1, 2014
Page 29
QuickSpecs
HP ProLiant ML150 Generation9 (Gen9)
Storage
4-bay LFF non-hot-plug drive model
8-bay SFF hot-plug drive model
4-bay LFF hot-plug drive model
1-8
8 x LFF SATA/SSD Non-hot-plug Hard Drive Bays
9-10
Media Bays
NOTE: When populating 10 LFF, not able to install Tape
Drive or Optical Drive. Possible Configurations: 1) 8LFF
+1 ODD+ 1 Tape Drive (Full/Half), or 2) 9LFF + 1ODD, or
3) 9LFF + 1 Tape Drive (Full/Half).
1 x 1-8
8 x LFF SAS/SSD Hot Pluggable Hard Drive Bays
2 x 1-8
8 x LFF SAS/SSD Hot Pluggable Hard Drive Bays
1 x 1-4
4 x LFF SATA/SSD Hot Pluggable Hard Drive Bays
2 x 1-4
4 x LFF SATA/SSD Hot Pluggable Hard Drive Bays
c04447841 – DA – 15090 North America — Version 1 — December 1, 2014
Page 30
QuickSpecs
HP ProLiant ML150 Generation9 (Gen9)
Technical Specifications
System Unit
Tower Dimensions 17.03(H) x 7.87(W) x 24.41(D) in (43.26 x 20 x 62 cm)
Tower Weight
Minimum:
Maximum:
Input
Requirements
Range Line Voltage
(for Standard 460W Rated Input Current
PSU, see power
specifications tables Rated Input
Frequency
for detail on 460W,
750W and 1200W Rated Input Power
power supplies)
BTU Rating
Maximum
Power
Specifications
Power Supply
Output
System Inlet
Temperature
37.26lb (16.9kg)
61.73lb (28kg)
100 to 240 VAC
For 550W Power Supply:6.7 A (at 100 VAC)3.3 A (at 100 VAC)
47 to 63 Hz
For 550 W Power Supply:< 670 W (at 100 VAC),< 660 W (at 200 VAC),
For 550 W Power Supply: 2201 BTU/hr (at 100 VAC),2153 BTU/hr (at
200 VAC)
To review typical system power ratings use the Power Advisor which is available via the
online tool located at URL: www.hp.com/go/proliant-energy-efficient or
www.hp.com/go/hppoweradvisor - Click on the system of interest. Example: ML150 Gen9Follow the instructions of the next screens.
Rated Steady-State For 550 W Power Supply:550 W (at 100 VAC),550 W (at 200 VAC),
Power
Maximum Peak
For 550 W Power Supply:550 W (at 100 VAC),550 W (at 200 VAC),
Power
Standard Operating 10° to 35°C (50° to 95°F) at sea level with an altitude derating of
Support
1.0°Cper every 304.8 m (1.8°F per every 1000 ft) above sea level to a
maximum of 3048 m (10,000 ft), no direct sustained sunlight.
Maximum rate of change is 20°C/hr (36°F/hr). The upper limit and rate
of change may be limited by the type and number of options installed.
System performance during standard operating support may be
reduced if operating with a fan fault or above 30°C (86°F).
Extended Ambient For approved hardware configurations, the supported system inlet
Operating Support range is extended to be: 5° to 10°C (41° to 50°F) and 35° to 40°C (95° to
104°F) at sea level with an altitude derating of 1.0°C per every 175 m
(1.8°F per every 574 ft) above 900 m (2953 ft) to a maximum of 3050
m (10,000 ft). The approved hardware configurations for this system
are listed at the URL: http://www.hp.com/servers/ashrae
For approved hardware configurations, the supported system inlet
range is extended to be: 40° to 45°C (104° to 113°F) at sea level with an
altitude derating of 1.0°C per every 125 m (1.8°F per every 410 ft)
above 900 m (2953 ft) to a maximum of 3048 m (10,000 ft). The
approved hardware configurations for this system are listed at the
URL: http://www.hp.com/servers/ashrae
Non-operating
Relative Humidity Operating
Non-operating
Altitude
Operating
Non-operating
System performance may be reduced if operating in the extended
ambient operating range or with a fan fault.
NOTE: Supports A3 extended ambient, A4 extended ambience will be
available in early 2015.
-30° to 60°C (-22° to 140°F). Maximum rate of change is
20°C/hr(36°F/hr).
Minimum to be the higher (more moisture) of -12°C (10.4°F) dew point
or 8% relative humidity. Maximum to be the lower (less moisture)
of24°C (75.2°F) dew point or 90% relative humidity.
5% to 95% relative humidity (Rh), 38.7°C (101.7°F) maximum wet bulb
temperature, non-condensing.
3048 m (10,000 ft). This value may be limited by the type and number
of options installed. Maximum allowable altitude change rate is
457m/min (1500 ft/min).
9144 m (30,000 ft). Maximum allowable altitude change rate is
457m/min (1500 ft/min).
c04447841 – DA – 15090 North America — Version 1 — December 1, 2014
Page 31
QuickSpecs
HP ProLiant ML150 Generation9 (Gen9)
Technical Specifications
Acoustic Noise
Listed are the declared A-Weighted sound power levels (LWAd) and declared average
bystander position A-Weighted sound pressure levels (LpAm) when the product is operating
in a 23°C ambient environment. Noise emissions were measured in accordance with ISO 7779
(ECMA 74) and declared in accordance with ISO 9296 (ECMA 109).
Idle
L WAd
3.8 Bels (1P LFF Non Hot-Plug Entry)
3.8 Bels (1P LFF Hot-plug Base)
4.3 Bels (1P SFF Hot-plug Performance)
L pAm
22 dBA (1P LFF Non Hot-Plug Entry)
22 dBA (1P LFF Hot-plug Base)
25 dBA (1P SFF Hot-plug Performance)
Operating
L WAd
3.8 Bels (1P LFF Non Hot-Plug Entry)
3.8 Bels (1P LFF Hot-plug Base)
4.1 Bels (1P SFF Hot-plug Performance)
L pAm
23 dBA (1P LFF Non Hot-Plug Entry)
22 dBA (1P LFF Hot-plug Base)
25 dBA (1P SFF Hot-plug Performance)
NOTE: Configurations tested for 1P LFF Entry models included two (2) 500GB LFF SATA
Midline HDD and Windows 2012 Enterprise 64-bit.
NOTE: Configurations tested for 1P and 2P SFF models included two (2) 500GB SFF SATA
Midline HDD and Windows 2012 Enterprise 64-bit.
NOTE: The Listed sound levels apply to standard shipping configurations. Additional options
may result in increased sound levels.
FCC Rating
Class A
Normative Standards CISPR 22; EN55022; EN55024; FCC CFR 47, Pt 15; ICES-003; CNS13438;
GB9254; K22;K24; EN 61000-3-2; EN 61000-3-3; EN 60950-1; IEC
60950-1
NOTE: Product conformance to cited product specifications is based on sample (type) testing,
evaluation, or assessment. This product or family of products is eligible to bear the
appropriate compliance logos and statements.
Emissions
Classification
HP Dynamic Smart Number of PCI links
Array B140i
PCI link rate
Controller
Storage protocol
support
SAS/SATA peak
data tranfer rate
Number of
SAS/SATA links
SAS/SATA
connectivity
Expander support
Drives supported
(max)
RAID support
Software
management
Warranty
HP Secure
Encryption license
HP SmartCache
License
HP Smart Storage
Administrator
Four
4 Gb/s
SATA
6 Gb/s
10 links
2x4 connectors; 2x1 connectors
No
Up to 10 Internal Drives
0, 1, 10, 5 SATA
HP SSA, SMH, SIM
Server warranty
Not Supported
Not Supported
Supported
c04447841 – DA – 15090 North America — Version 1 — December 1, 2014
Page 32
QuickSpecs
HP ProLiant ML150 Generation9 (Gen9)
Technical Specifications
HP Ethernet 1Gb 4- Network Interface 10Base-T/100Base-TX/1000Base-TX
port 331i Adapter Compatibility
IEEE 802.3 10Base-T
IEEE 802.3ab 1000Base-T
IEEE 802.3u 100Base-TX
Data Transfer
Method
Controller
Network Transfer
Rate
Connector
Cable Support
PCI Express, two lanes (x2)
BCM5717
10Base-T (HalfDuplex)
10Base-T (FullDuplex)
100Base-TX (HalfDuplex)
100Base-TX (FullDuplex)
100Base-TX (HalfDuplex)
100Base-TX (FullDuplex)
10 Mb/s per port, 40 Mb/s combined
20 Mb/s per port, 80 Mb/s combined
100 Mb/s per port, 400 Mb/s combined
200 Mb/s per port, 800 Mb/s combined
1000Mb/s per port, 4000 Mb/s combined
2000Mb/s per port, 8000 Mb/s combined
RJ-45
10 Base-T
10/100/1000 Base-TX
Environment-friendly End-of-life
Products and Approach Management and
Recycling
Categories 3, 4 or 5 UTP; up to 328 ft (100 m)
Category 5 or higher UTP; up to 328 ft (100 m)
Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling programs in
many geographic areas. For trade-in information, please go to:
http://www.hp.com/go/green. To recycle your product, please go to:
http://www.hp.com/go/green or contact your nearest HP sales office. Products returned to
HP will be recycled, recovered or disposed of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment
information for each product type for use by treatment facilities. This information (product
disassembly instructions) is posted on the Hewlett Packard web site at:
http://www.hp.com/go/green. These instructions may be used by recyclers and other WEEE
treatment facilities as well as HP OEM customers who integrate and re-sell HP equipment.
© Copyright 2014 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the
express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional
warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
Intel® and Xeon® are registered trademarks of Intel Corporation in the U.S. and other countries.
Microsoft®, Windows®, and Windows Server® are U.S. registered trademarks of the Microsoft group of companies.
For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less
c04447841 – DA – 15090 North America — Version 1 — December 1, 2014
Page 33
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising