CyberData | SiP Compliant 010846 | Product specifications | CyberData SiP Compliant 010846 Product specifications

CyberData SiP Compliant 010846 Product specifications
The IP Endpoint Company
VoIP Paging Gateway
Operations Guide
Part #010846
Document Part #930098F
for Firmware Version 3.00
CyberData Corporation
3 Justin Court
Monterey, CA 93940
(831) 373-2601
VoIP Paging Gateway 930098F
SiP Compliant 010846
COPYRIGHT NOTICE:
© 2012, CyberData Corporation, ALL RIGHTS RESERVED.
This manual and related materials are the copyrighted property of CyberData Corporation. No part
of this manual or related materials may be reproduced or transmitted, in any form or by any means
(except for internal use by licensed customers), without prior express written permission of
CyberData Corporation. This manual, and the products, software, firmware, and/or hardware
described in this manual are the property of CyberData Corporation, provided under the terms of an
agreement between CyberData Corporation and recipient of this manual, and their use is subject to
that agreement and its terms.
DISCLAIMER: Except as expressly and specifically stated in a written agreement executed by
CyberData Corporation, CyberData Corporation makes no representation or warranty, express or
implied, including any warranty or merchantability or fitness for any purpose, with respect to this
manual or the products, software, firmware, and/or hardware described herein, and CyberData
Corporation assumes no liability for damages or claims resulting from any use of this manual or
such products, software, firmware, and/or hardware. CyberData Corporation reserves the right to
make changes, without notice, to this manual and to any such product, software, firmware, and/or
hardware.
OPEN SOURCE STATEMENT: Certain software components included in CyberData products are
subject to the GNU General Public License (GPL) and Lesser GNU General Public License (LGPL)
“open source” or “free software” licenses. Some of this Open Source Software may be owned by
third parties. Open Source Software is not subject to the terms and conditions of the CyberData
COPYRIGHT NOTICE or software licenses. Your right to copy, modify, and distribute any Open
Source Software is determined by the terms of the GPL, LGPL, or third party, according to who
licenses that software.
Software or firmware developed by CyberData that is unrelated to Open Source Software is
copyrighted by CyberData, subject to the terms of CyberData licenses, and may not be copied,
modified, reverse-engineered, or otherwise altered without explicit written permission from
CyberData Corporation.
TRADEMARK NOTICE: CyberData Corporation and the CyberData Corporation logos are
trademarks of CyberData Corporation. Other product names, trademarks, and service marks may be
the trademarks or registered trademarks of their respective owners.
Technical Support
The IP Endpoint Company
The fastest way to get technical support for your VoIP product is to
submit a VoIP Technical Support form at the following website:
http://www.cyberdata.net/support/contactsupportvoip.html
Phone: (831) 373-2601, Ext. 333
Email: support@cyberdata.net
Fax: (831) 373-4193
Company and product information is at www.cyberdata.net.
Operations Guide
930098F
CyberData Corporation
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has
two blades with one wider than the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete
outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
13. Prior to installation, consult local building and electrical code requirements.
14. WARNING: The VoIP Intercom enclosure is not rated for any AC voltages!
Warning
Electrical Hazard: This product should be installed by a licensed electrician
according to all local electrical and building codes.
GENERAL ALERT
Warning
Electrical Hazard: To prevent injury, this apparatus must be securely attached to
the floor/wall in accordance with the installation instructions.
GENERAL ALERT
Operations Guide
930098F
CyberData Corporation
Pictorial Alert Icons
General Alert
This pictoral alert indicates a potentially hazardous situation. This alert will be
followed by a hazard level heading and more specific information about the
hazard.
GENERAL ALERT
Ground
This pictoral alert indicates the Earth grounding connection point.
Hazard Levels
Danger: Indicates an imminently hazardous situation which, if not avoided, will result in death or
serious injury. This is limited to the most extreme situations.
Warning: Indicates a potentially hazardous situation which, if not avoided, could result in death or
serious injury.
Caution: Indicates a potentially hazardous situation which, if not avoided, could result in minor or
moderate injury. It may also alert users against unsafe practices.
Notice: Indicates a statement of company policy (that is, a safety policy or protection of property).
The safety guidelines for the equipment in this manual do not purport to address all the safety
issues of the equipment. It is the responsibility of the user to establish appropriate safety, ergonomic,
and health practices and determine the applicability of regulatory limitations prior to use. Potential
safety hazards are identified in this manual through the use of words Danger, Warning, and
Caution, the specific hazard type, and pictorial alert icons.
Operations Guide
930098F
CyberData Corporation
Revision Information
Revision 930098F, which was released on August 31, 2012 and corresponds to firmware version 3.00,
has the following changes:
• Updates Section 1.2, "Supported Protocols".
Operations Guide
930098F
CyberData Corporation
6
Contents
Chapter 1 Product Overview
1
1.1 Product Features .....................................................................................................................................1
1.2 Supported Protocols ..............................................................................................................................2
1.3 Product Specifications ...........................................................................................................................2
Chapter 2 Setting Up, Configuring, and Using the Paging Gateway
3
2.1 Parts List ..................................................................................................................................................3
2.2 Typical Installation .................................................................................................................................4
2.3 Setting up the VoIP Paging Gateway ..................................................................................................5
2.3.1 Connect to the Power Source ....................................................................................................5
2.3.2 Connect to the Network ............................................................................................................6
2.3.3 Confirm that the VoIP Paging Gateway is Working Properly ..............................................7
2.3.3.1 Confirm Power on, Network Connectivity, and Connection Speed .........................7
2.3.3.2 Verify Network Activity .................................................................................................7
2.3.4 Connect to a Paging Device ......................................................................................................8
2.3.4.1 Connect the VoIP Paging Gateway to a Paging Amplifier .........................................8
2.3.4.2 Connect the VoIP Paging Gateway to a Telephone .....................................................8
2.3.5 Broadcast a test message to all paging zones .........................................................................9
2.3.6 Restore the Factory Default Settings as Required ............................................................... 10
2.4 Configuring the VoIP Paging Gateway ............................................................................................ 11
2.4.1 Gather the Required Configuration Information ................................................................ 11
2.4.1.1 Static or DHCP Addressing? ........................................................................................ 11
2.4.1.2 Username and Password for Configuration GUI ..................................................... 11
2.4.1.3 Zone Numbers for Testing Purposes .......................................................................... 11
2.4.1.4 SIP Settings ..................................................................................................................... 11
2.4.2 Log in to the Configuration GUI ............................................................................................12
2.4.3 Configure the Network Parameters ...................................................................................... 14
2.4.4 Change the Default Username and Password ..................................................................... 16
2.4.5 Broadcast a Test Message to a Specific Paging Zone .......................................................... 18
2.4.6 Configure the SiP Parameters ................................................................................................. 19
2.5 Upgrading the Firmware ................................................................................................................... 22
2.6 Rebooting the VoIP Paging Gateway ............................................................................................... 24
Appendix A: Setting Up a TFTP Server
25
A.1 Set up a TFTP Server .......................................................................................................................... 25
A.1.1 In a LINUX Environment ........................................................................................................ 25
A.1.2 In a Windows Environment ................................................................................................... 25
Appendix B: Troubleshooting/Technical Support
26
B.1 Frequently Asked Questions (FAQ) .................................................................................................. 26
B.2 Documentation ..................................................................................................................................... 26
B.3 Contact Information ............................................................................................................................ 27
B.4 Warranty ............................................................................................................................................... 28
B.4.1 Warranty & RMA Returns within the United States ........................................................... 28
B.4.2 Warranty & RMA Returns Outside of the United States .................................................... 28
B.4.3 Spare in the Air Policy .............................................................................................................28
B.4.4 Return and Restocking Policy ................................................................................................. 29
B.4.5 Warranty and RMA Returns Page .......................................................................................... 29
Index
Operations Guide
30
930098F
CyberData Corporation
1
1 Product Overview
The VoIP Paging Gateway enables access to existing paging speakers through a VoIP phone system.
This interface uses a standard paging amplifier, and supports paging to multiple zones from a VoIP
phone.
1.1 Product Features
• SIP compliancy
• Dual speeds of 10Mbps and 100 Mbps
• Multi-zone paging for up to 99 Zones
• Web-based firmware upgrades
• PoE enabled
• Connector for optional external power supply
Operations Guide
930098F
CyberData Corporation
2
1.2 Supported Protocols
• Asterisk™ SIP server
• Offers Open Source benefits with the rich and flexible feature set of a large, proprietary PBX
system.
• HTTP Web-based configuration
• Provides an intuitive GUI for easy system configuration and verification of gateways
operations.
• DHCP Client
• Dynamically assigns IP addresses in addition to the option to use static addressing.
• TFTP Client
• Facilitates Web-based firmware upgrades of the latest speaker capabilities.
• Audio Codec
• G.711 U-law
• Packet size: 20 ms
• DTMF detection/generation
• Echo cancellation
1.3 Product Specifications
Specifications
Operations Guide
Regulatory Compliance
FCC Class A, UL 60950, CE
Power Requirement
PoE or 48V DC
Connection Speed
10/100 Mbps
Protocol
SiP compliant
Part Number
010846
Dimensions
6.11”L x 4.05”W x 1.15” H
Weight
1.2 pounds
930098F
CyberData Corporation
3
2 Setting Up, Configuring, and Using the
Paging Gateway
2.1 Parts List
The packaging for the VoIP Paging Gateway includes the parts shown in Table 2-1.
Table 2-1. Parts List
Quantity Part Name
Operations Guide
Illustration
1
VoIP Paging Gateway
1
Installation Quick Reference Guide
1
Mounting Template (located on the last
page of the Installation Quick
Reference)
1
Mounting Kit (part #070057A)
which includes:
(2) #4-6 x 7/8" Mounting Anchors
(2) #4 x 1-1/4" Round Phillips Wood
Screws
2
#4-6 x 7/8" Mounting Anchors
2
#4 x 1-1/4" Round Phillips Wood
Screws
930098F
CyberData Corporation
4
2.2 Typical Installation
Figure 2-1 illustrates how the VoIP Paging Gateway is normally installed as part of a paging system.
Figure 2-1. Typical Installation
PoE VoIP Paging Gateway
VoIP Phone
Paging Speakers
FXO
Paging Amplifier
FXS
IP PBX
Complete the following steps after installation:
1. Call to make a page. The VoIP Paging Gateway generates a tone over the phone.
2. When you hear the tone, enter the two-digit code for the zone that you want to page.
• The VoIP Paging Gateway sends the code to the paging amplifier.
• When the paging amp acknowledges the code, the VoIP Paging Gateway generates another tone
to the phone.
3. When you hear the tone, you can begin paging.
Operations Guide
930098F
CyberData Corporation
5
2.3 Setting up the VoIP Paging Gateway
Before you set up the VoIP Paging Gateway, be sure that you have received all the parts described in
Section 2.1, "Parts List".
To set up the VoIP Paging Gateway, see the following sections:
• Section 2.3.1, "Connect to the Power Source"
• Section 2.3.2, "Connect to the Network"
• Section 2.3.3, "Confirm that the VoIP Paging Gateway is Working Properly"
• Section 2.3.3.1, "Confirm Power on, Network Connectivity, and Connection Speed"
• Section 2.3.3.2, "Verify Network Activity"
• Section 2.3.4, "Connect to a Paging Device"
• Section 2.3.4.1, "Connect the VoIP Paging Gateway to a Paging Amplifier"
• Section 2.3.4.2, "Connect the VoIP Paging Gateway to a Telephone"
• Section 2.3.5, "Broadcast a test message to all paging zones"
• Section 2.3.6, "Restore the Factory Default Settings as Required"
2.3.1 Connect to the Power Source
To use PoE, plug a Cat 5 Ethernet cable from the VoIP Paging Gateway Ethernet port to your
network. As an alternative to PoE, you can plug one end of a +48V DC power supply into the Paging
Gateway, and plug the other end into a receptacle. Connect the earth grounding wire to the chassis
ground on the back of the unit.
Figure 2-2. Connecting to the Power Source
48V DC
Chassis
ground
Operations Guide
930098F
CyberData Corporation
6
2.3.2 Connect to the Network
Plug one end of a standard Ethernet cable into the Paging Gateway Ethernet port. Plug the other
end into your network.
Figure 2-3. Connecting to the Network
48V DC
Operations Guide
930098F
CyberData Corporation
7
2.3.3 Confirm that the VoIP Paging Gateway is Working Properly
The indicator lights on the front of the VoIP Paging Gateway verify the unit’s operations.
Figure 2-4. Paging Gateway Indicator Lights
Link
Test/Reset switch
On when network connection is established
Orange when baud rate = 100Mbps
Yellow when baud rate = 10Mbps
Act.
Status
Paging
Blinks to indicate network activity
Blinks when unit is up and running
Blinks when unit is paging
2.3.3.1 Confirm Power on, Network Connectivity, and Connection Speed
When you plug in the Ethernet cable or power supply:
• The round, blue Status light on the front of the VoIP Paging Gateway comes on indicating that
the power is on. Once the device has been initialized, this light blinks at one second intervals.
• The square, green Link light above the Ethernet port indicates that the network connection has
been established. The Link light changes color to confirm the auto-negotiated baud rate:
• This light is yellow at 10 Mbps.
• It is orange at 100 Mbps.
• The green Paging light comes on after the device is booted and initialized. This light blinks
when a page is in progress.
2.3.3.2 Verify Network Activity
The square, yellow Act light blinks when there is network activity.
Operations Guide
930098F
CyberData Corporation
8
2.3.4 Connect to a Paging Device
You can broadcast test messages via two different paging devices:
• A paging amplifier, which you use for normal paging operations, broadcasts the test message to
the speakers in a specified paging zone. To do so, you need to first see Section 2.3.4.1, "Connect
the VoIP Paging Gateway to a Paging Amplifier".
• Via a Plain Old Telephone (POT), which broadcasts the test message to you over the phone. See
Section 2.3.4.2, "Connect the VoIP Paging Gateway to a Telephone".
2.3.4.1 Connect the VoIP Paging Gateway to a Paging Amplifier
Plug one end of a modular telephone cord into the Paging Gateway Line Out port. Plug the other
end into your paging amplifier.
Figure 2-5. Connecting to a Paging Amplifier
48VDC
2.3.4.2 Connect the VoIP Paging Gateway to a Telephone
Plug one end of a modular telephone cord into the Paging Gateway Line Out port. Plug the other
end into a touch tone telephone.
Operations Guide
930098F
CyberData Corporation
9
2.3.5 Broadcast a test message to all paging zones
The Test/Reset switch is located on the back of the VoIP Paging Gateway (see Figure 2-6). The Test/
Reset switch enables testing to all paging zones and lets you restore the VoIP Paging Gateway to its
factory default settings.
Figure 2-6. Test/Reset Switch
Test/Reset switch
Once the VoIP Paging Gateway is running and connected to a paging device, use the Test/Reset
switch to broadcast a test message to all of the zones in the paging system.
When the VoIP Paging Gateway has been configured and connected to a paging device, you can
also broadcast a test message to a paging zone that you specify. See Section 2.4.5, "Broadcast a
Test Message to a Specific Paging Zone".
To use the Test/Reset switch to broadcast a test message to all zones, complete the following steps:
1. Press the end of a paper clip into the switch only until it beeps after one second.
2. Immediately release the switch. The VoIP Paging Gateway sends the audio message, via the
paging amplifier, to zone 00, which is the code for all zones, and the test message is broadcast to
all enabled paging zones. The round, green Paging light below the Status light blinks when the
page is in progress.
Caution
Pressing the Test/Reset switch for longer than one second might restore the VoIP
Paging Gateway settings to the factory defaults.
GENERAL ALERT
Operations Guide
930098F
CyberData Corporation
10
2.3.6 Restore the Factory Default Settings as Required
The VoIP Paging Gateway is delivered with factory set default values for the following parameters.
Use the Test/Reset switch on the back of the unit to restore these parameters to the factory default
settings.
When you perform this procedure, the factory default settings are restored for all the following
parameters.
Parameter
Factory Default Setting
IP Addressing
static
IP Address
192.168.3.10
Username
admin
Password
admin
Subnet Mask
255.255.255.0
Default Gateway
192.168.3.1
To restore these parameters to the factory default settings:
1. Press and hold the Test/Reset switch while the unit beeps after one second and all indicator
lights on the front of the unit come on.
2. Continue to press the switch until after the indicator lights go off, and then release it. The
following will then occur:
• The VoIP Paging Gateway settings are restored to the factory defaults.
• The unit announces the restored default IP address:
• 192.168.3.10
• Then, a voice message announces that the unit is rebooting.
Operations Guide
930098F
CyberData Corporation
11
2.4 Configuring the VoIP Paging Gateway
Complete the following sections to configure the VoIP Paging Gateway online:
• Section 2.4.1, "Gather the Required Configuration Information"
• Section 2.4.2, "Log in to the Configuration GUI"
• Section 2.4.3, "Configure the Network Parameters"
• Section 2.4.4, "Change the Default Username and Password"
• Section 2.4.6, "Configure the SiP Parameters"
2.4.1 Gather the Required Configuration Information
Gather all of the information indicated in the following sections before you configure the VoIP
Paging Gateway.
2.4.1.1 Static or DHCP Addressing?
Know whether your system uses static or dynamic (DHCP) IP addressing. If it uses static
addressing, you also need to know the values to assign to the following VoIP Paging Gateway
parameters:
• IP Address
• Subnet Mask
• Default Gateway
2.4.1.2 Username and Password for Configuration GUI
Determine the Username and Password that will replace the defaults after you initially log in to the
configuration GUI.
• The Username is case-sensitive, and must be from four to 25 alphanumeric characters long
• The Password is case-sensitive, and must be from four to 20 alphanumeric characters long
2.4.1.3 Zone Numbers for Testing Purposes
To audio test the VoIP Paging Gateway you need to enter the zone number you are testing. Be sure
to have this information on hand so that you can audio test the gateway with each paging zone.
2.4.1.4 SIP Settings
To configure the SIP parameters, determine whether you want to register the server. If you do,
determine the number of minutes the registration lease remains valid, and whether you want to
automatically unregister when you reboot. To configure the SIP parameters, you also need to
determine the values for these parameters:
• SIP Server IP Address
• Remote and Local SIP Port Numbers
• SIP User ID, and Authenticate ID and Password for this User ID
Operations Guide
930098F
CyberData Corporation
12
2.4.2 Log in to the Configuration GUI
To log in:
1. For the initial configuration of the VoIP Paging Gateway, open your browser and enter the
following address:
http://192.168.3.10
To work with the VoIP Paging Gateway configuration after the initial configuration, log in using
the IP address you assign to the device. Section 2.4.3, "Configure the Network Parameters"
provides instructions for entering the IP address.
2. When prompted, use the following default Username and Password to open the configuration
Home page:
Username: admin
Password: admin
Figure 2-7. Home Page
Operations Guide
930098F
CyberData Corporation
13
3. On the Home Page, review the setup details and navigation buttons described in Table 2-1.
Table 2-1. Home Page Overview
Web Page Item
Description
Device Name
Shows the device name.
Serial #
Device serial number.
Ethernet Address
Device ethernet address.
IP Addressing
Shows the current IP addressing setting (DHCP or static).
IP Address
Shows the current IP address.
Subnet Mask
Shows the current subnet mask address.
Default Gateway
Shows the current default gateway address.
Link to the Network Setup web page.
Link to the Gateway Setup web page.
Link to the SIP Setup web page.
Link to the Upgrade Firmware web page.
At this point you can do the following:
• Review the VoIP Paging Gateway’s Current Settings. Use the Test/Reset switch to restore the
factory default settings. See Section 2.3.6, "Restore the Factory Default Settings as Required" .
• Configure the network parameters. Click Network Setup and see Section 2.4.3, "Configure the
Network Parameters" for instructions.
• Configure the VoIP Paging Gateway parameters. Click Gateway Setup and see Section 2.4.4,
"Change the Default Username and Password" for instructions.
• Configure the SIP parameters. Click SIP Setup and see Section 2.4.6, "Configure the SiP
Parameters".
Click the Upgrade Firmware button any time that you need to upload new versions of the
firmware or Reboot the VoIP Paging Gateway. See Section 2.5, "Upgrading the Firmware" and
Section 2.6, "Rebooting the VoIP Paging Gateway" for instructions.
Operations Guide
930098F
CyberData Corporation
14
2.4.3 Configure the Network Parameters
Configuring the network parameters enables your network to recognize the VoIP Paging Gateway
and communicate with it. Click Network Setup on the Home page to open the Network
Configuration page.
Figure 2-8. Network Setup Page
Operations Guide
930098F
CyberData Corporation
15
4. On the Network Setup page, enter values for the parameters indicated in Table 2-2.
Table 2-2. Network Setup Parameters
Web Page Item
Description
IP Addressing*
Select either DHCP IP Addressing or Static IP Addressing by
marking the appropriate radio button. If you select Static, configure
the remaining parameters indicated in Table 2-2. If you select DHCP,
go to Step 3.
IP Address*
Enter the Static IP address.
Subnet Mask
Enter the Subnet Mask address.
Default Gateway
Enter the Default Gateway address.
DNS Server 1*
Enter the DNS Server 1 address.
DNS Server 2*
Enter the DNS Server 2 address.
Click on this button to save your configuration settings. Changing a
parameter that has an asterisk next to it will cause a system reboot
when saved.
Link to the Gateway Setup web page.
Link to the SIP Setup web page.
Link to the Upgrade Firmware web page.
Link to the Home page.
On this page, complete the following steps:
1. Specify whether you use Static or DHCP IP Addressing by marking the appropriate radio
button. Then, if you select Static, go to Step 2.
Changing the IP Addressing selection causes the system to reboot after you select Save
Settings.
2. For Static IP Addressing, also enter values for the following parameters:
a. The VoIP Paging Gateway’s IP Address: The VoIP Paging Gateway is delivered with a
factory default IP address. Change the default address to the correct IP address for your
system.
Changing the VoIP Paging Gateway’s IP Address causes the system to reboot after you select
Save Settings.
b. The Subnet Mask.
c. The Default Gateway.
3. Click Save Settings when you are finished.
Operations Guide
930098F
CyberData Corporation
16
2.4.4 Change the Default Username and Password
On the Home page, click Gateway Setup to open the Gateway Configuration page. After changing
the Username and Password settings on this page, you will be required to log in using these new
parameters.
You can also run an audio test from this page. See Section 2.4.5, "Broadcast a Test Message to a
Specific Paging Zone" for more information.
Figure 2-9. Gateway Configuration Page
Operations Guide
930098F
CyberData Corporation
17
4. On the Gateway Setup page, enter values for the parameters indicated in Table 2-3.
Table 2-3. Gateway Setup Parameters
Web Page Item
Description
Device Name
Enter the name of the device.
Change Web Access Username
Use this field to change the Web Access Username
Change Web Access Password
Use this field to change the Web Access Password
Re-enter New Password
Use this field to re-enter a new password
Ring Out
This selects the option for the gateway to either provide a
ring to the attached device or to connect without ringing.
Select Yes or No whether you want to enable the Ring.
Zone Digits (0-2)
Selecting 0 Zone digits enables the caller to connect directly
to the attached device without having to enter in a DTMF
tone.
Selecting either 1 or 2 digits forces the entry of the DTMF
tones.
Zone
Enter the Zone number to be tested.
Click on this button to save your configuration settings.
Changing a parameter that has an asterisk next to it will
cause a system reboot when saved.
Click on this button to do an audio test. Generates a voice
message for testing the speaker audio quality and volume.
Link to the Network Setup web page.
Link to the SIP Setup web page.
Link to the Upgrade Firmware web page.
Link to the Home page.
To change the default Web access Username and Password, complete the following steps:
1. Enter the new Username from four to 25 alphanumeric characters in the Change Username
field. The Username is case-sensitive.
2. Enter the new Password from four to 20 alphanumeric characters in the Change Password field.
The Password is case-sensitive.
3. Enter the new password again in the Re-enter New Password field.
4. Select Save Settings.
Operations Guide
930098F
CyberData Corporation
18
2.4.5 Broadcast a Test Message to a Specific Paging Zone
Once the VoIP Paging Gateway is set up and configured, you can broadcast test messages to
different paging zones that you specify. On the Home page, click Gateway Setup to open the
Gateway Configuration page.
You can broadcast a test message to all paging zones by using the Test/Reset switch on the back
of the VoIP Paging Gateway. See Section 2.3.5, "Broadcast a test message to all paging zones" for
instructions.
Figure 2-10. Gateway Configuration Page
To broadcast a test message to a specific paging zone, complete the following steps:
1. Enter the paging Zone you want to test.
2. Click Audio Test. The VoIP Paging Gateway sends a brief audio message to that zone. Notice
that the round, green Paging light below the Status light blinks when a page is in progress
Operations Guide
930098F
CyberData Corporation
19
2.4.6 Configure the SiP Parameters
The SIP parameters enable the VoIP Paging Gateway to contact and register with the SIP server. On
the Home page, click SIP Setup to open the SIP Configuration page.
Figure 2-11. SIP Configuration Page
Operations Guide
930098F
CyberData Corporation
20
3. On the SIP Setup page, enter values for the parameters indicated in Table 2-4.
Table 2-4. SIP Setup Parameters
Web Page Item
Description
SIP Server*
Enter the SIP server represented as either a numeric IP
address in dotted decimal notation or the fully qualified
host name (FQHN) up to 64 characters.
Outbound Proxy
Enter the Outbound Proxy as either a numeric IP address
in dotted decimal notation or the fully qualified host name
(FQHN) up to 64 characters.
Remote SIP Port*
Enter the Remote SIP Port number (default is 5060).
Local SIP Port*
Enter the Local SIP Port number (default is 5060).
SIP User ID*
Enter the SIP User ID (up to 25 alphanumeric characters).
Authenticate ID*
Enter the Authenticate ID
(up to 25 alphanumeric characters).
Authenticate Password*
Enter the Authenticate Password
(up to 25 alphanumeric characters).
SIP Registration*
Enable/Disable SIP Registration.
Unregister on Reboot*
• Select Yes to automatically unregister the speaker when
it is rebooted.
• Select No to keep the speaker registered when it is
rebooted.
Register Expiration*
Enter the SIP Registration lease time in minutes (default is
60 minutes).
Click on this button to save your configuration settings.
Changing a parameter that has an asterisk next to it will
cause a system reboot when saved.
Link to the Network Setup web page.
Link to the Gateway Setup web page.
Link to the Upgrade Firmware web page.
Link to the Home page.
Operations Guide
930098F
CyberData Corporation
21
Complete the following steps:
1. Enter the IP address of the SIP Server.
2. Enter the port numbers used for SIP signaling:
a. Remote SIP Port
b. Local SIP Port
3. Enter the SIP registration parameters:
a. SIP User ID
b. Authenticate ID
c. Authenticate Password
4. For SIP Registration, designate whether you want the IP Gateway to register with your SIP
server.
5. At Unregister on Reboot:
a. Select Yes to automatically unregister the VoIP Paging Gateway when you reboot it. Section
2.6, "Rebooting the VoIP Paging Gateway" provides instructions on that process.
b. Select No to keep the VoIP Paging Gateway registered when you reboot it.
6. In the Register Expiration field, enter the number of minutes the VoIP Paging Gateway
registration lease remains valid with the SIP Server. The VoIP Paging Gateway automatically reregisters with the SIP server before the lease expiration timeout.
Operations Guide
930098F
CyberData Corporation
22
2.5 Upgrading the Firmware
The firmware on the board consists of two files: a Kernel and an Application, that can be loaded
separately. Uploading the firmware files requires a host machine running a TFTP server. If you need
to set up this server, see Appendix A, “Setting up a TFTP server” for instructions.
Figure 2-12. Firmware Upgrade Page
To upload a firmware file, log in as instructed in Section 2.4.2, "Log in to the Configuration GUI".
Table 2-5 shows the web page items on the Firmware Upgrade page.
Table 2-5. Firmware Upgrade Parameters
Operations Guide
Web Page Item
Description
System Configuration
Shows the current configuration.
Bootname
Shows the current boot loader filename.
Kernel
Shows the current kernel filename for partition 1 and 2.
Application
Shows the current application filename for partition 1
and 2.
TFTP Server IP address
Enter the TFTP Server IP address.
New Filename
Use this field to enter the new file name for the kernel or
application firmware file that you are uploading.
930098F
CyberData Corporation
23
Table 2-5. Firmware Upgrade Parameters (continued)
Web Page Item
Description
Click on this button to automatically upload the selected
firmware and reboot the system.
Link to the Network Setup web page.
Link to the Gateway Setup web page.
Link to the SIP Setup web page.
Link to the Home page.
Click on this button to reboot the system.
To upgrade the firmware for the Paging Gateway, complete the following steps:
1. On the Home page, click Upgrade Firmware to open the Firmware Upgrade page.
2. Enter the TFTP Server IP address.
3. Enter the Kernel or Application New Filename for the firmware file you are uploading.
4. Select the Partition to which the firmware is uploaded.
5. Click Upload File to automatically upload the selected firmware, and reboot your system.
Operations Guide
930098F
CyberData Corporation
24
2.6 Rebooting the VoIP Paging Gateway
To reboot the system, complete the following steps:
1. Log in as instructed in Section 2.4.2, "Log in to the Configuration GUI".
2. On the Home page, click Upgrade Firmware to open the Firmware Upgrade page.
See Figure 2-13.
Figure 2-13. .Firmware Upgrade Page
3. Go to the Reboot section on the right side of the page.
4. Select Partition 1 or Partition 2 for the Kernel and the Application.
5. Click Reboot.
Operations Guide
930098F
CyberData Corporation
25
Appendix A: Setting Up a TFTP Server
A.1 Set up a TFTP Server
Autoprovisioning requires a TFTP server for hosting the configuration file.
A.1.1 In a LINUX Environment
To set up a TFTP server on LINUX:
1. Create a directory dedicated to the TFTP server, and move the files to be uploaded to that
directory.
2. Run the following command where /tftpboot/ is the path to the directory you created in
Step 1: the directory that contains the files to be uploaded. For example:
in.tftpd -l -s /tftpboot/your_directory_name
A.1.2 In a Windows Environment
You can find several options online for setting up a Windows TFTP server. This example explains
how to use the Solarwinds freeware TFTP server, which you can download from the following
website address:
http://www.cyberdata.net/support/voip/solarwinds.html
To set up a TFTP server on Windows:
1. Install and start the software.
2. Select File/Configure/Security tab/Transmit Only.
3. Make a note of the default directory name, and then move the firmware files to be uploaded to
that directory.
Operations Guide
930098F
CyberData Corporation
26
Appendix B: Troubleshooting/Technical
Support
B.1 Frequently Asked Questions (FAQ)
A list of frequently asked questions (FAQs) are available on the VoIP Paging Gateway product page
at:
http://www.cyberdata.net/products/voip/legacyanalog/paginggateway/faqs.html
Select the support page for your product to see a list of frequently asked questions for the
CyberData product:
B.2 Documentation
The documentation for this product is released in an English language version only.
You can download PDF copies of CyberData product documentation from the
VoIP Paging Gateway product page at:
http://www.cyberdata.net/products/voip/legacyanalog/paginggateway/docs.html
Operations Guide
930098F
CyberData Corporation
27
B.3 Contact Information
Contact
CyberData Corporation
3 Justin Court
Monterey, CA 93940 USA
www.CyberData.net
Phone: 800-CYBERDATA (800-292-3732)
Fax: 831-373-4193
Sales
Sales 831-373-2601 Extension 334
Technical
Support
The fastest way to get technical support for your VoIP product is to submit a VoIP Technical Support
form at the following website:
http://www.cyberdata.net/support/contactsupportvoip.html
Phone: (831) 373-2601, Ext. 333
Email: support@cyberdata.net
Returned
Materials
Authorization
To return the product, contact the Returned Materials Authorization (RMA) department:
Phone: 831-373-2601, Extension 136
Email: RMA@CyberData.net
When returning a product to CyberData, an approved CyberData RMA number must be printed on
the outside of the original shipping package. No product will be accepted for return without an
approved RMA number. Send the product, in its original package, to the following address:
CyberData Corporation
3 Justin Court
Monterey, CA 93940
Attention: RMA "your RMA number"
RMA Status Form If you need to inquire about the repair status of your product(s), please use the CyberData RMA
Status form at the following web address:
http://www.cyberdata.net/support/rmastatus.html
Operations Guide
930098F
CyberData Corporation
28
B.4 Warranty
CyberData warrants its product against defects in material or workmanship for a period of two
years from the date of purchase. Should the product fail within the warranty period, CyberData will
repair or replace the product free of charge. This warranty includes all parts and labor.
Should the product fail out-of-warranty, a flat rate repair charge of one half of the purchase price of
the product will be assessed. Repairs that are in warranty but are damaged by improper
modifications or abuse, will be charged at the out-of-warranty rate. Products shipped to CyberData,
both in and out-of-warranty, are shipped at the expense of the customer. Shipping charges for
repaired products shipped back to the customer by CyberData, will be paid by CyberData.
CyberData shall not under any circumstances be liable to any person for any special, incidental,
indirect or consequential damages, including without limitation, damages resulting from use or
malfunction of the products, loss of profits or revenues or costs of replacement goods, even if
CyberData is informed in advance of the possibility of such damages.
B.4.1 Warranty & RMA Returns within the United States
If service is required, you must contact CyberData Technical Support prior to returning any
products to CyberData. Our Technical Support staff will determine if your product should be
returned to us for further inspection. If Technical Support determines that your product needs to be
returned to CyberData, an RMA number will be issued to you at this point.
Your issued RMA number must be printed on the outside of the shipping box. No product will be
accepted for return without an approved RMA number. The product in its original package should
be sent to the following address:
CyberData Corporation
3 Justin Court.
Monterey, CA 93940
Attn: RMA "xxxxxx"
B.4.2 Warranty & RMA Returns Outside of the United States
If you purchased your equipment through an authorized international distributor or reseller, please
contact them directly for product repairs.
B.4.3 Spare in the Air Policy
CyberData now offers a Spare in the Air no wait policy for warranty returns within the United States
and Canada. More information about the Spare in the Air policy is available at the following web
address:
http://www.cyberdata.net/support/warranty/spareintheair.html
Operations Guide
930098F
CyberData Corporation
29
B.4.4 Return and Restocking Policy
For our authorized distributors and resellers, please refer to your CyberData Service Agreement for
information on our return guidelines and procedures.
For End Users, please contact the company that you purchased your equipment from for their
return policy.
B.4.5 Warranty and RMA Returns Page
The most recent warranty and RMA information is available at the CyberData Warranty and RMA
Returns Page at the following web address:
http://www.cyberdata.net/support/warranty/index.html
Operations Guide
930098F
CyberData Corporation
30
Index
Symbols
contact information 27
contact information for CyberData 27
current settings, reviewing 13
CyberData contact information 27
+48V DC power supply 5
Numerics
D
100 Mbps indicator light 7
default
gateway 10
IP address 10
subnet mask 10
username and password 10
default gateway 10, 15
default gateway for static addressing 15
default password for configuration GUI 12
default settings, restoring 10
default username and password for configuration
GUI 12
DHCP addressing 11, 15
DHCP Client 2
DHCP IP addressing 15
dimensions 2
DNS server 15
DTMF detection 2
dual speeds 1, 7
A
act light 7
address, login 12
addressing
DHCP 11, 15
static 11, 15
admin username and password 12
all paging zones, code for 9
application
partition at reboot 24
asterisk 15, 17, 20
Asterisk SIP server 2
Audio Codec 2
audio test button 18
audio testing paging zones
using the test/reset button 9
authenticate ID and password for SIP server
registration 21
autoprovisioning
setting up a TFTP server 25
E
echo cancellation 2
ethernet port 5
expiration time for SIP server lease 20, 21
B
F
blue status light 7
features 1
firmware upgrade page 23, 24
firmware, upgrade 13, 22
C
cat 5 ethernet cable 5
changing default username and password for
configuration GUI 16
configuration information 11
connection speed 2
Operations Guide
G
gateway configuration 13
930098F
CyberData Corporation
31
gateway configuration page 16, 18
gateway setup button 13, 16, 18
green light, blinking 9, 18
green link light 7
green paging light 7
GUI username and password 16
network parameters, configuring 14
network setup button 13, 14
network, connecting to 5, 6
O
orange link light 7
outbound proxy 20
H
hazard levels 4
http web-based configuration 2
P
paging amplifier
connecting to 8
in typical installation 4
paging gateway
configuration 11
paging light 7, 9, 18
paging speakers in typical installation 4
paging zones 9, 18
part number 2
parts list 3
password
configuration GUI 11, 16
for SIP server login 20
restoring the default 10
SIP server authentication 21
port
ethernet 5
line out 8
local SIP 20, 21
remote SIP 20, 21
power
requirement 2
product overview 1
I
IP address 10, 15, 22
SIP server 21
IP addressing 15
default
IP addressing setting 10
IP PBX in typical installation 4
K
kernel
partition at reboot 24
L
lease, SIP server expiration time 20, 21
line out port 8
link light 7
Linux, setting up a TFTP server on 25
local SIP port 20, 21
log in address 12
logging in to configuration GUI 12
R
reboot 23
paging gateway 24
unregistering from SIP server during 21
registration and expiration, SIP server
lease expiration 21
registration and expiration, SIP server lease 20
regulatory compliance 2
remote SIP port 20, 21
required configuration for web access username and
password 11, 17
requirements for upgrading firmware 22
reset switch 18
resetting the IP address to the default 26
restoring factory default settings 10
M
modular telephone cord 8
multi-zone paging 1
N
network activity, verifying 7
network configuration page 14
Operations Guide
930098F
CyberData Corporation
32
return and restocking policy 29
ring out 17
RMA returned materials authorization 27
RMA status 27
user ID for SIP server registration 21
user ID, SIP 20
username
restoring the default 10
username for configuration GUI 11, 16
S
V
safety instructions 3
sales 27
server
SIP 13
TFTP 22, 25
server address, SIP 20
service 27
SIP configuration
SIP Server 20
SIP configuration page 19
SIP registration 20
SIP server 20
SIP server configuration 13
SIP server parameters, configuring 11
SIP setup button 13, 19
Spare in the Air Policy 28
specifications 2
static addressing 11, 15
static IP addressing 15
status light 7
subnet mask 10, 15
subnet mask static addressing 15
supported protocols 2
verifying
network activity 7
VoIP phone in typical installation 4
W
warranty 28
warranty & RMA returns outside of the United States 28
warranty & RMA returns within the United States 28
warranty and RMA returns page 29
warranty policy at CyberData 28
web configuration log in address 12
weight 2
Windows, setting up a TFTP server on 25
Y
yellow act light 7
yellow link light 7
T
Z
tech support 27
technical support, contact information 27
test/reset switch 9
testing
a specified paging zone 18
all paging zones 9
TFTP server 2, 22, 25
TFTP server IP 23
zone 17
zone 00 9
zone digits 17
zones
audio testing 18
numbers 11
U
unregister from SIP server 21
unregister, from SIP server 20
upgrade firmware 13, 22
upgrade firmware button 13, 23, 24
upload file button 23
user ID
for SIP server login 20
Operations Guide
930098F
CyberData Corporation
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising