Assa Abloy | 9800 TCNE1 Series | Operating instructions | Assa Abloy 9800 TCNE1 Series Operating instructions

Assa Abloy 9800 TCNE1 Series Operating instructions
MANUFACTURER WARRANTIES
Page 1-2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8-13
Page 14
Page 15-20
Page 21-26
Page 27
Page 28-42
Page 43
Page 44
Page 45
Page 46
Page 47
Page 48-52
Page 53
Page 54
Page 55
Page 56
Page 57-58
Abus
ADA-EZ
Adams Rite
Advanced Diagnostics
Alarm Lock
American Lock
Amsec General Warranty
Amsec Gun Safe Warranty
Amsec SF & TF Safes Warranty
Amsec TF5517 Warranty
Arrow
Assa High Security
CCL
Command Access
CompX
Corbin Russwin
Detex
Don-Jo
Falcon/Monarch/Dor-o-Matic
GMS Lock
HES
HPC
Ilco
Page 59
Page 60-64
Page 65
Page 66
Page 67
Page 68
Page 69
Page 70
Page 71
Page 72
Page 73
Page 74
Page 75
Page 76
Page 77
Page 78
Page 79-80
Page 81
Page 82
Page 83
Page 84
Page 85
Page 86
Kaba Mas
Keri Systems
KSP
Kwikset
LCN
Lucky Line
Markar
Master Lock
Norton
Olympus Lock
PDQ
PHI
Pro-Lok
RCI
Sargent
Sargent & Greenleaf
Schlage Commercial
Schlage Electronics
Securitron
Select Hinges
Strattec
Von Duprin
Yale
Security is a matter of TRUST!
ABUS 2012 PRICE LIST
OCTOBER 2011
*
LIMITED WARRANTY, TERMS AND CONDITIONS
Adams Rite Manufacturing Company (hereinafter ADAMS RITE) manufactures its products
in a manner to be free of defects. Should any defect of manufacture (in material or workmanship) occur in its products ADAMS RITE, upon prompt notification and proof to its
satisfaction that the product was defective in manufacture for the use intended by ADAMS
RITE, will at its option, exchange the product, repair the defect or refund the price charged
by ADAMS RITE, FOB factory based on the following schedule:
„ All mechanical products for five (5) years from date of manufacture.
„ All electrical products (including EL and ED exit devices) for three (3) years
from date of manufacture.
Limitations and Exclusions:
This is a limited warranty and is in lieu of all other warranties (including the implied
warranties of merchantability and fitness for use) and under no circumstances shall
ADAMS RITE be liable for any incidental or consequential damages or losses.
This warranty covers products as outlined above manufactured from May 1, 2003 forward.
THIS WARRANTY DOES NOT COVER DAMAGES FROM SUCH CAUSES AS ABUSE,
ACCIDENT, NEGLECT, FIRE OR FREIGHT DAMAGE.
Returned Goods:
Defects or errors for which we are responsible will be corrected promptly. Defective
merchandise will be credited or replaced in accordance with our LIMITED WARRANTY upon
inspection by Adams Rite. Written authorization must be obtained from the factory and the
goods returned to us prepaid. Merchandise ordered in error by the customer is subject to a
minimum 35% restocking charge if returned within 90 days of receipt. Merchandise returned
90-120 days from receipt is subject to a 50% restocking charge. Credit will not be allowed
on items held longer than 120 days.
Return Material Authorizations (RMAs) will be closed if the goods are not received within
30 days of issuance.
Cancellation:
Orders that require modifications and special materials or are non-stock items are subject
to cancellation charges based on manufacturing and material expenses incurred.
14
List prices effective July 15, 2011
1 year limited warranty.
Contact Advanced Diagnostics directly to proceed.
ALARM LOCK SYSTEMS, INC.
WARRANTY/RETURN POLICY
Alarm Lock Systems Inc. warrants its products to be free from manufacturing
defects in material and workmanship. The length of said warranty is 24 months
on all products from the date of manufacture.
Any customer may get an over-the-counter exchange with the original seller
(distributor) for any Alarm Lock product failing to operate properly.
For those customers who have direct accounts with Alarm Lock, please follow
this procedure to return product for inspection:
1. Call Customer Service at 1 800 252-5625 ext 149 to obtain a return
authorization number. Or you can fax a request to 631 842-3574.
2. Advise your customer that upon receipt of said product, Alarm Lock will
inspect that product.
3. If said product is found not to be operating properly because of a factory
defect and is within the warranty period, Alarm Lock will at the customer’s
request, either issue a product replacement or a credit to the customer’s
account.
4. If said product is found not to be operating properly because, it has been
repaired by others, improperly installed, improperly used, abused, altered,
defaced in any way, or is out of warranty, there will be a charge incurred to
repair the product.
Any customer, who does not have a direct account, can return their product for
inspection if it is not operating properly. Upon inspection, the customer will be
contacted and advised of the results of the inspection. If the product is found not
to be operating properly because of a manufacturing defect, Alarm Lock can
repair or replace the product. If the product is found not to be operating
properly because, it has been repaired by others, improperly installed,
improperly used, abused, altered, defaced in any way, or is out of warranty,
there will be a charge incurred to repair the product.
If you experience a problem with any Alarm Lock product, you may contact
Alarm Lock’s Technical Support directly at 1 800 252-5625.
55
Important Operating Instructions
and Warranty Information
On Your New AMSEC Safe
Read Contents Carefully For
Trouble-Free Operation of Your Safe
Dear Valued Customer:
Congratulations on your purchase of the finest safe from American
Security Products, Co.
You’ve taken an important step in organizing and protecting your most
valued possessions. Every AMSEC safe is professionally hand-crafted and
designed to provide a lifetime of trouble-free performance.
AMSEC offers the industry’s finest warranty backed by a nationwide
network of highly skilled authorized dealers, providing prompt,
courteous, and professional service. We suggest that you read the Limited
Warranty thoroughly, and invite you to contact your authorized AMSEC
dealer or AMSEC’s Service Department if you have any questions.
Please also take the time to read and familiarize yourself with the proper
operating procedures of your new safe presented on the following pages.
Again, Congratulations and Thank You for selecting AMSEC!
AMERICAN SECURITY
PRODUCTS COMPANY
11925 Pacific Ave
Fontana, CA 92337
Visit us on the web at:
www.amsecusa.com
Each AMSEC safe is professionally hand-crafted with quality materials and is equipped with a precision-quality,
high-security combination lock. To become familiar with the lock, operate the lock (as outlined below) several times
before closing the door and locking the safe.
Operation Instructions:
• Don’t spin, force or make abrupt stops with the combination dial. A combination lock is a precision instrument and
can be damaged by abuse which leads to a costly “lockout.”
• Don’t slam the door. Extreme shock can damage the lock or jam the boltwork.
• Don’t shut the door with the boltwork in the locked position. Damage to the boltwork and marring the safe’s
finish may result.
• Don’t stack contents of the safe so that the door must be forced shut. Jamming of the boltwork may result.
• Don’t store the combination card inside the safe.
• Don’t use oil, grease or any other lubricant on the combination lock.
• Dial the combination slowly and exactly to the number looking straight at the dial. Use your thumb as a brake to
avoid passing the number.
• Restart the dialing sequence if you pass a number, it is required to dial the combination within a 1/2 number, in
order to open the lock.
• Dial the numbers to the bold, highlighted or framed mark at the 12 o’clock position on the dial ring. The other
mark is for servicing the lock which should only be done by a qualified locksmith.
• Always lock the boltwork and scramble the combination when you are finished using the safe.
• Keep all moving parts clean and free from obstruction, water and grease.
• If you experience a difference in the feel of the operation, inconsistency or difficulty opening or operating the safe,
DO NOT LOCK THE SAFE. Immediately contact the security store from whom you purchased the safe. If this is not
practical, contact the AMSEC service department at 951-685-9680, Ext. 1036.
Combination Operating Instructions:
Mechanical Group II Combination Locks:
To unlock the safe, turn the dial in the direction of the arrow for each number, stopping at the opening index mark
located at the top (12 o’clock position) of the dial ring. You must dial the combination precisely without backing up.
(See figure A).
Opening index
Turn the dial LEFT (counter clockwise), stopping when the 1st
number comes to the opening index mark the 4th time.
changing
Turn the dial RIGHT (clockwise), stopping when the 2nd
number comes to the opening index mark the 3rd time.
index
0
10
80
20
70
Turn the dial LEFT (counter clockwise), stopping when the 3rd
number comes to the opening index mark the 2nd time.
TO OPEN: Turn the dial slowly to the RIGHT (clockwise) until it
stops. Turn the handle and open the door.
90
30
60
50
40
Fig. A
TO LOCK: Close the door and turn the handle. Turn the dial to the LEFT (counter clockwise) at least 4 full revolutions.
STAR Round Door Combination Operating Instructions:
Follow the dialing instructions listed above. After dialing the third number rotate the dial to the right stopping at
“0”, press the dial in and continue turning to the right until it stops (approx. #73). Lift the door and place on a clean
surface.
Key Locking Dial (Optional):
Set the combination lock on “0”. Using the key found in the bag hanging on the handle of the safe, turn the key to the
left (counterclockwise) approx. 1/2 turn to lock. To unlock, turn the key to the right until it stops and remove. Dial the
combination as instructed above.
Electronic Combination Locks:
(Refer to operating instructions found in the bag hanging on the handle of the safe).
CAUTION FIRE SAFE CONTENT STORAGE
A fire safe contains insulation material, which may cause humidity to be present when closed extended periods
of time. It is recommended that the safe is opened on a regular basis and interior allowed to air out. It is also
recommended that documents sensitive to moisture be kept in a sealed container, I.E Ziplock® or Tupperware®.
MAINTENANCE
Standard Textured finish: Your safe is provided with a durable paint that may be easily cleaned with a mild
detergent and a soft cloth. Do Not use abrasive scouring pads or any chemical fluids, which may react and damage
the finish.
Hi-Gloss Finish: This finish is a two-stage paint, which is the same used in the automotive industry. Use a damp cloth
with mild detergent if needed. A good grade of automotive wax is recommended if the finish appear dull. Do Not use
abrasive scouring pads or any chemical fluids, which may react and damage the finish.
Door Operating Mechanism: The handle of the safe moves mechanical parts inside the door. After a period of use, if
difficulty is experienced in operation, please contact a qualified locksmith for service.
Door Hinges: If the door becomes hard to open or emits noise, the hinges may need lubrication. Please contact a
qualified locksmith for service.
Caution: AMSEC assumes no liability for finish damage due to the incorrect use of caustic lubricants.
Mechanical Combination Locks: Mechanical combination locks will perform well for the life of the safe when
operated correctly. Occasionally, they may need to be cleaned and adjusted if dialing the combination becomes
difficult. When this is experienced, contact a qualified locksmith for service. Attempting to service a combination lock
yourself will void the warranty and may result in a malfunction and require your safe to be drilled.
DAMAGE CLAIMS
Freight Damage: All safes are carefully packed for shipment. The manufacturer’s liability ceases when the
transportation carrier accepts the shipment in good condition. The carrier’s liability ceases when you sign for the
merchandise. INSPECT YOUR SHIPMENT BEFORE SIGNING THE DELIVERY RECEIPT. Although unlikely, if damage
occurs you have the option of refusing the shipment or negotiating a settlement with the carrier. To negotiate a
settlement follow these steps:
1. Note the extent of the damage on the freight bill and sign your name.
2. Save all cartons and packaging materials.
3. Call the freight carrier immediately and request a damage inspection claim.
All Claims:
1. Contact your dealer immediately.
2. Claims must be filed within 15 days.
3. Claims must be accompanied by proof of purchase receipt and photographs.
4. In the event of replacement, the safe must be returned to the dealer/factory in the original packaging.
Limited Product Warranty
LIMITED WARRANTY—SECURITY SAFES & ELECTRONIC PRODUCTS
Product Category
Duration of Warranty
(Beginning from date of first consumer purchase / Proof of purchase necessary)
All Safes and related components . . . . . . . . . . . . . . . . . . 1 Year Parts & Labor
Electronic Locks and related components . . . . . . . . . . 1 Year Parts & Labor
Special Extended Warranty / Product Category
(See special coverage guidelines enclosed for each product category)
U.L. Listed Fire Safes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Year Parts & Labor—Lifetime Free
Super Brute Floor Safes. . . . . . . . . . . . . . . . . . . . . . . . . . . . Replacement
Gun Safes
What is covered and what is not covered:
This warranty covers all defects in materials or workmanship in this product, but DOES NOT COVER:
(1)
Damage, deterioration or malfunction resulting from:
a.
Accident, negligence, misuse, abuse, improper installation, failure to perform normal maintenance or
operation to follow instructions labeled on or provided in the safe.
b.
Any damage occurred from shipment. (Claims must be presented to the carrier)
c.
Repair or attempted repair by anyone other than a pre-authorized AMSEC service dealer.
(2)
Any unit which has been altered or on which the serial number has been defaced, modified or removed.
(3)
Normal wear, battery replacement, any periodic maintenance or where combination lock has been changed
without factory authorization.
Who may enforce the warranty:
This warranty is only enforceable by the original purchaser.
What we will pay for and what you must pay for:
AMSEC will repair or replace units covered by this warranty, without charge to the consumer for labor and materials.
YOU ARE RESPONSIBLE FOR ANY INSTALLATION OR REMOVAL CHARGES AND FOR ANY SHIPPING CHARGES. State
sales tax does not apply to warranty service work and will not be honored. If safe components must be shipped for
warranty service, AMSEC will pay the shipping charges to any destination within the USA if the repairs are covered by
the warranty. Defective parts must be returned (not repaired unless instructed) to AMSEC. If parts are not returned,
the warranty invoice will be denied.
How you can get warranty service:
(1)
If your AMSEC safe requires service, contact your local authorized AMSEC dealer and the dealer will advise you
of the procedures to be followed. If this is not practical, contact the AMSEC Service Department at the address
on front cover or call 951-685-9680, ex. #1036.
(2)
All warranty service must have prior authorization, accompanied by proof of purchase as evidence of warranty
coverage. A warranty authorization number must be obtained from AMSEC before any service work is
performed. The serial number, description of product and description of problem must be supplied to AMSEC
to determine warranty status before an authorization number will be assigned. Issuance of the authorization
number recognizes only the existence of the problem and does not constitute an admission of liability by
AMSEC. Only approved service representatives will be authorized to perform warranty service. Any service
performed prior to issuance of a warranty authorization number will be subject to denial.
Limitation of Implied Warranties:
Any implied warranties, including warranties of merchantability and fitness for a particular purpose, are limited in
duration to the length of this warranty.
Exclusions of Damages:
AMSEC’s liability for any defective products is limited to repair or replacement of the product, at our option.
AMSEC shall not be liable for damages based upon inconvenience, loss of use, damage or loss of contents, or any
other damages whether incidental, consequential or otherwise.
PURCHASE RECORD
Model #:___________________________________________________________
Serial #:_ __________________________________________________________
Date of Purchase:___________________________________________________
Purchased From:____________________________________________________
Company:__________________________________________________________
Address:___________________________________________________________
City__________________________ State_________ Zip Code_ _____________
Telephone #:_ ______________________________________________________
Email Address:_ ____________________________________________________
Website:___________________________________________________________
RECORD YOUR COMBINATION AND KEY NUMBERS HERE
(STORE IN A SAFE PLACE)
Personal Combination:
_________
_________
_________
OneTwoThree
Key Number: _______________________________________________________
If you like us to send AMSEC Safe information to a friend or have any questions
concerning our complete line of security products, please send your request to:
AMERICAN SECURITY
PRODUCTS COMPANY
11925 Pacific Ave
Fontana, CA 92337
Visit us on the web at:
www.amsecusa.com
Part #4305174
Revised 03/10
Special Extended Product Warranty
U.L. Listed Fire Safes / Lifetime Replacement Warranty:
All AMSEC U.L. Listed fire safes are protected by a LIFETIME FREE REPLACEMENT
GUARANTEE, assuring the original owner free replacement of safes that are damaged
beyond repair by a fire with a current production model of comparable value. The
damaged safe must be returned freight prepaid to the factory within 30 days of the
loss, accompanied by a properly filed fire department report. This warranty does not
apply to damage or loss resulting from accident, alteration, unauthorized entry or
improper installation. AMSEC’s limited warranty policy and procedures apply to any
extended product warranties.
Super Brute Floor Safes / Lifetime Replacement Warranty
If your AMSEC Super Brute floor safe is subject of a sledgehammer or pry attack and
is forcibly entered, AMSEC will replace or repair the safe (our option) with a current
production model of comparable value - free of charge. The damaged safe must be
returned freight prepaid to the factory within 30 days of the loss, accompanied by a
properly filed police report. This warranty does not apply to damage or loss resulting
from accident, alteration, unauthorized entry or improper installation. AMSEC’s limited
warranty policy and procedures applies to any extended product warranties.
Gun Safe Lifetime Warranty
If you are the original owner of an AMSEC gun safe that suffers damage due to theft
or fire, provide us with a properly filed police report, within 30 days. We will replace
or repair (our option) free of charge with a current production model of comparable
value upon prepaid delivery to our factory. For additional assistance, please contact
your local dealer. We will be standing by ready to take immediate action to get your
valuables quickly secured back in a quality-built AMSEC safe.
Gun Safe Break-in Warranty
If your AMSEC gun safe is forcibly entered, we will replace or repair it, free of charge
upon prepaid freight to our factory.
Gun Safe Attempted Break-in Warranty
If your AMSEC gun safe has been subjected to a drill, punch or pry attack and has
performed successfully by keeping intruders out, it will be repaired or replaced free of
charge upon prepaid freight to our factory.
Gun Safe Fire Warranty
If your AMSEC gun safe has been subjected to a home fire, it will be repaired or
replaced free of charge upon prepaid freight to our factory.
Gun Safe Warranty effective on Gun Safe purchases starting 01/01/2006
SF-TF-WarrantyInstructions.qxp
1/7/2009
9:17 AM
Page 1
PURCHASE RECORD
Model #:____________________________________________________________
Serial #:____________________________________________________________
Date of Purchase:____________________________________________________
Purchased From:_____________________________________________________
Company:___________________________________________________________
Address:____________________________________________________________
City________________________State________________Zip Code ___________
Telephone #:________________________________________________________
Each AMSEC safe is professionally hand-crafted with quality materials and is equipped with a
precision-quality, high-security combination lock. To become familiar with the lock, operate
the lock (as outlined below) several times before closing the door and locking the safe.
Operation Instructions:
• Don’t spin, force or make abrupt stops with the combination dial. A combination lock is a
precision instrument and can be damaged by abuse which leads to a costly “lockout.”
• Don’t slam the door. Extreme shock can damage the lock or jam the boltwork.
• Don’t shut the door with the boltwork in the locked position. Damage to the boltwork and
marring the safe's finish may result.
• Don’t stack contents of the safe so that the door must be forced shut. Jamming of the
boltwork may result.
• Don’t store the combination card inside the safe.
• Don’t use oil, grease or any other lubricant on the combination lock.
• Dial the combination slowly and exactly to the number looking straight at the dial. Use your
thumb as a brake to avoid passing the number.
• Restart the dialing sequence if you pass a number, it is required to dial the combination within a 1/2 number, in order to open the lock.
• Dial the numbers to the bold, highlighted or framed mark at the 12 o'clock position on the dial ring.
The other mark is for servicing the lock which should only be done by a qualified locksmith.
• Always lock the boltwork and scramble the combination when you are finished using the
safe.
• Keep all moving parts clean and free from obstruction, water and grease.
• If you experience a difference in the feel of the operation, inconsistency or difficulty opening
or operating the safe, DO NOT LOCK THE SAFE. Immediately contact the security store from
whom you purchased the safe. If this is not practical, contact the AMSEC service department
at 951-685-9680, Ext. 1036.
SF-TF-WarrantyInstructions.qxp
1/7/2009
9:17 AM
Page 2
CAUTION FIRE SAFE CONTENT STORAGE
A fire safe contains insulation material, which may cause humidity to be present when closed
extended periods of time. It is recommended that the safe is opened on a regular basis and
interior allowed to air out. It is also recommended that documents sensitive to moisture be
kept in a sealed container, I.E Ziplock® or Tupperware®.
MAINTENANCE
Standard Textured finish: Your safe is provided with a durable paint that may be easily
cleaned with a mild detergent and a soft cloth. Do Not use abrasive scouring pads or any
chemical fluids, which may react and damage the finish.
Hi-Gloss Finish: This finish is a two-stage paint, which is the same used in the automotive
industry. Use a damp cloth with mild detergent if needed. A good grade of automotive wax is
recommended if the finish appear dull. Do Not use abrasive scouring pads or any chemical
fluids, which may react and damage the finish.
Door Operating Mechanism: The handle of the safe moves mechanical parts inside the door.
After a period of use, if difficulty is experienced in operation, please contact a qualified
locksmith for service.
Door Hinges: If the door becomes hard to open or emits noise, the hinges may need
lubrication. Please contact a qualified locksmith for service.
Caution: AMSEC assumes no liability for finish damage due to the incorrect use of caustic
lubricants.
Mechanical Combination Locks: Mechanical combination locks will perform well for the life of
the safe when operated correctly. Occasionally, they may need to be cleaned and adjusted if
dialing the combination becomes difficult. When this is experienced, contact a qualified
locksmith for service. Attempting to service a combination lock yourself will void the warranty
and may result in a malfunction and require your safe to be drilled.
DAMAGE CLAIMS
Freight Damage: All safes are carefully packed for shipment. The manufacturer’s liability
ceases when the transportation carrier accepts the shipment in good condition. The carrier’s
liability ceases when you sign for the merchandise. INSPECT YOUR SHIPMENT BEFORE
SIGNING THE DELIVERY RECEIPT. Although unlikely, if damage occurs you have the option of
refusing the shipment or negotiating a settlement with the carrier. To negotiate a settlement
follow these steps:
1. Note the extent of the damage on the freight bill and sign your name.
2. Save all cartons and packaging materials.
3. Call the freight carrier immediately and request a damage inspection claim.
All Claims:
1. Contact your dealer immediately.
2. Claims must be filed within 15 days.
3. Claims must be accompanied by proof of purchase receipt and photographs.
4. In the event of replacement, the safe must be returned to the dealer/factory in the original
packaging.
SF-TF-WarrantyInstructions.qxp
1/7/2009
9:17 AM
Page 2
Limited Product Warranty
LIMITED WARRANTY—SECURITY SAFES & ELECTRONIC PRODUCTS
Product Category
Duration of Warranty
(Beginning from date of first consumer purchase / Proof of purchase necessary)
All Safes and related components . . . . . . . . . . . 1 Year Parts & Labor
Electronic Locks and related components . . . . . . 1 Year Parts & Labor
Special Extended Warranty / Product Category
(See special coverage guidelines enclosed for each product category)
TF & SF Series Gun Safes Only
1 Year Parts & Labor—Lifetime Free
Replacement
What is covered and what is not covered:
This warranty covers all defects in materials or workmanship in this product, but DOES NOT
COVER:
(1) Damage, deterioration or malfunction resulting from:
a. Accident, negligence, misuse, abuse, improper installation, failure to perform normal
maintenance or operation to follow instructions labeled on or provided in the safe.
b. Any damage occurred from shipment. (Claims must be presented to the carrier)
c. Repair or attempted repair by anyone other than a pre-authorized AMSEC service dealer.
(2) Any unit which has been altered or on which the serial number has been defaced, modified
or removed.
(3) Normal wear, battery replacement, any periodic maintenance or where combination lock
has been changed without factory authorization.
Who may enforce the warranty:
This warranty is only enforceable by the original purchaser.
What we will pay for and what you must pay for:
AMSEC will repair or replace units covered by this warranty, without charge to the consumer
for labor and materials. YOU ARE RESPONSIBLE FOR ANY INSTALLATION OR REMOVAL
CHARGES AND FOR ANY SHIPPING CHARGES. State sales tax does not apply to warranty
service work and will not be honored. If safe components must be shipped for warranty
service, AMSEC will pay the shipping charges to any destination within the USA if the repairs
are covered by the warranty. Defective parts must be returned (not repaired unless instructed)
to AMSEC. If parts are not returned, the warranty invoice will be denied.
How you can get warranty service:
(1) If your AMSEC safe requires service, contact your local authorized AMSEC dealer and the
dealer will advise you of the procedures to be followed. If this is not practical, contact the
AMSEC Service Department at the address on front cover or call 951-685-9680, ex. #1036.
(2) All warranty service must have prior authorization, accompanied by proof of purchase as
evidence of warranty coverage. A warranty authorization number must be obtained from
AMSEC before any service work is performed. The serial number, description of product
and description of problem must be supplied to AMSEC to determine warranty status before
an authorization number will be assigned. Issuance of the authorization number recognizes
only the existence of the problem and does not constitute an admission of liability by
AMSEC. Only approved service representatives will be authorized to perform warranty
service. Any service performed prior to issuance of a warranty authorization number will
be subject to denial.
Limitation of Implied Warranties:
Any implied warranties, including warranties of merchantability and fitness for a particular
purpose, are limited in duration to the length of this warranty.
Exclusions of Damages:
AMSEC's liability for any defective products is limited to repair or replacement of the product,
at our option.
AMSEC shall not be liable for damages based upon inconvenience, loss of use, damage or loss
of contents, or any other damages whether incidental, consequential or otherwise.
SF-TF-WarrantyInstructions.qxp
1/7/2009
9:17 AM
Page 3
Special Extended Product Warranty
Gun Safe Lifetime Warranty
If you are the original owner of an AMSEC gun safe that suffers damage due to
theft or fire, provide us with a properly filed police report, within 30 days. With
absolutely no cost to you, which means: free parts, free labor and free freight; we
will either replace or repair (our option) with a current production model of comparable value. For additional assistance, please contact your local dealer. We will
be standing by ready to take immediate action to get your valuables quickly
secured back in a quality-built AMSEC safe.
No Cost - Break-in Warranty
If your AMSEC gun safe is forcibly entered, we will replace or repair it, free of
charge.
No Cost - Attempted Break-in Warranty
If your AMSEC gun safe has been subjected to a drill, punch or pry attack and has
performed successfully by keeping intruders out, it will be repaired or replaced
free of charge.
No Cost - Fire Warranty
If your AMSEC gun safe has been subjected to a home fire, it will be repaired or
replaced free of charge.
American Security’s Gun Safe Warranty commitment to you: We will fix the safe in your home if at all possible, we
will pay for the safe technician to open the safe, we will pay for the safe technician to repair the safe and if a repair
is not possible within the home, we will pay for the freight back to the factory.
Gun Safe Warranty effective on Gun Safe purchases starting 01/01/2006
SF-TF-WarrantyInstructions.qxp
1/7/2009
9:17 AM
Page 4
SF-TF-WarrantyInstructions.qxp
1/7/2009
9:17 AM
Page 5
Important Operating Instructions
and Warranty Information On Your
New AMSEC Safe
MODELS:
SF5924, SF6032, SF6030, SF6036, TF5924, TF6032, TF6030, TF6036
FS2215, FS3018, FS4622
Read Contents Carefully For
Trouble-Free Operation of Your Safe
Dear Valued Customer:
Congratulations on your purchase of the finest safe from American
Security Products, Co.
You’ve taken an important step in organizing and protecting your
most valued possessions. Every AMSEC safe is professionally hand-crafted and designed to provide a lifetime of trouble-free performance.
AMSEC offers the industry's finest warranty backed by a nationwide
network of highly skilled authorized dealers, providing prompt, courteous, and professional service. We suggest that you read the Limited
Warranty thoroughly, and invite you to contact your authorized AMSEC
dealer or AMSEC's Service Department if you have any questions.
Please also take the time to read and familiarize yourself with the
proper operating procedures of your new safe presented on the following
pages.
Again, Congratulations and Thank You for selecting AMSEC!
If you like us to send AMSEC Safe information to a friend or have any
questions concerning our complete line of security products, please send
your request to:
AMERICAN SECURITY
PRODUCTS COMPANY
11925 Pacific Avenue
Fontana, California 92337
Visit us on the web at:
www.amsecusa.com
Part# 4305245
Important Operating Instructions
and Warranty Information
On Your New AMSEC Safe
MODELS:
TF5517 and AM Series
Read Contents Carefully For
Trouble-Free Operation of Your Safe
Dear Valued Customer:
Congratulations on your purchase of the finest safe from American
Security Products, Co.
You’ve taken an important step in organizing and protecting your most
valued possessions. Every AMSEC safe is professionally hand-crafted and
designed to provide a lifetime of trouble-free performance.
AMSEC offers the industry’s finest warranty backed by a nationwide
network of highly skilled authorized dealers, providing prompt,
courteous, and professional service. We suggest that you read the Limited
Warranty thoroughly, and invite you to contact your authorized AMSEC
dealer or AMSEC’s Service Department if you have any questions.
Please also take the time to read and familiarize yourself with the proper
operating procedures of your new safe presented on the following pages.
Again, Congratulations and Thank You for selecting AMSEC!
If you like us to send AMSEC Safe information to a friend or have any
questions concerning our complete line of security products, please send
your request to:
AMERICAN SECURITY
PRODUCTS COMPANY
11925 Pacific Ave
Fontana, CA 92337
Visit us on the web at:
www.amsecusa.com
Part #4305244
Revised 08/10
Each AMSEC safe is professionally hand-crafted with quality materials and is equipped with a
precision-quality, high-security combination lock. To become familiar with the lock, operate the
lock (as outlined below) several times before closing the door and locking the safe.
Operation Instructions:
• Don’t spin, force or make abrupt stops with the combination dial. A combination lock is a
precision instrument and can be damaged by abuse which leads to a costly “lockout.”
• Don’t slam the door. Extreme shock can damage the lock or jam the boltwork.
• Don’t shut the door with the boltwork in the locked position. Damage to the boltwork and
marring the safe’s finish may result.
• Don’t stack contents of the safe so that the door must be forced shut. Jamming of the
boltwork may result.
• Don’t store the combination card inside the safe.
• Don’t use oil, grease or any other lubricant on the combination lock.
• Dial the combination slowly and exactly to the number looking straight at the dial. Use your
thumb as a brake to avoid passing the number.
• Restart the dialing sequence if you pass a number, it is required to dial the combination within
a 1/2 number, in order to open the lock.
• Dial the numbers to the bold, highlighted or framed mark at the 12 o’clock position on the
dial ring. The other mark is for servicing the lock which should only be done by a qualified
locksmith.
• Always lock the boltwork and scramble the combination when you are finished using the safe.
• Keep all moving parts clean and free from obstruction, water and grease.
• If you experience a difference in the feel of the operation, inconsistency or difficulty opening
or operating the safe, DO NOT LOCK THE SAFE. Immediately contact the security store from
whom you purchased the safe. If this is not practical, contact the AMSEC service department at
951-685-9680, Ext. 1036.
CAUTION
FIRE SAFE CONTENT STORAGE
A fire safe contains insulation material, which may cause humidity to be present when closed
extended periods of time. It is recommended that the safe is opened on a regular basis and
interior allowed to air out. It is also recommended that documents sensitive to moisture be kept
in a sealed container, I.E Ziplock® or Tupperware®.
MAINTENANCE
Standard Textured finish: Your safe is provided with a durable paint that may be easily cleaned
with a mild detergent and a soft cloth. Do Not use abrasive scouring pads or any chemical fluids,
which may react and damage the finish.
Hi-Gloss Finish: This finish is a two-stage paint, which is the same used in the automotive
industry. Use a damp cloth with mild detergent if needed. A good grade of automotive wax is
recommended if the finish appear dull. Do Not use abrasive scouring pads or any chemical fluids,
which may react and damage the finish.
Door Operating Mechanism: The handle of the safe moves mechanical parts inside the door.
After a period of use, if difficulty is experienced in operation, please contact a qualified locksmith
for service.
Door Hinges: If the door becomes hard to open or emits noise, the hinges may need lubrication.
Please contact a qualified locksmith for service.
Caution:
AMSEC assumes no liability for finish damage due to the incorrect use of caustic lubricants.
Mechanical Combination Locks: Mechanical combination locks will perform well for the life
of the safe when operated correctly. Occasionally, they may need to be cleaned and adjusted
if dialing the combination becomes difficult. When this is experienced, contact a qualified
locksmith for service. Attempting to service a combination lock yourself will void the warranty
and may result in a malfunction and require your safe to be drilled.
DAMAGE CLAIMS
Freight Damage: All safes are carefully packed for shipment. The manufacturer’s liability ceases
when the transportation carrier accepts the shipment in good condition. The carrier’s liability
ceases when you sign for the merchandise. INSPECT YOUR SHIPMENT BEFORE SIGNING THE
DELIVERY RECEIPT. Although unlikely, if damage occurs you have the option of refusing the
shipment or negotiating a settlement with the carrier. To negotiate a settlement follow these steps:
1.
Note the extent of the damage on the freight bill and sign your name.
2.
Save all cartons and packaging materials.
3.
Call the freight carrier immediately and request a damage inspection claim.
All Claims:
1.
Contact your dealer immediately.
2.
Claims must be filed within 15 days.
3.
Claims must be accompanied by proof of purchase receipt and photographs.
4.
In the event of replacement, the safe must be returned to the dealer/factory in the original
packaging.
Limited Product Warranty
LIMITED WARRANTY—SECURITY SAFES & ELECTRONIC PRODUCTS
Product Category
Duration of Warranty
(Beginning from date of first consumer purchase / Proof of purchase necessary)
All Safes and related components . . . . . . . . . . . . . . . . . . 1 Year Parts & Labor
Electronic Locks and related components . . . . . . . . . . 1 Year Parts & Labor
What is covered and what is not covered:
This warranty covers all defects in materials or workmanship in this product, but DOES NOT COVER:
(1) Damage, deterioration or malfunction resulting from:
a.
b.
c.
Accident, negligence, misuse, abuse, improper installation, failure to perform normal
maintenance or operation to follow instructions labeled on or provided in the safe.
Any damage occurred from shipment. (Claims must be presented to the carrier)
Repair or attempted repair by anyone other than a pre-authorized AMSEC service dealer.
(2) Any unit which has been altered or on which the serial number has been defaced, modified or
removed.
(3) Normal wear, battery replacement, any periodic maintenance or where combination lock has
been changed without factory authorization.
Who may enforce the warranty:
This warranty is only enforceable by the original purchaser.
What we will pay for and what you must pay for:
AMSEC will repair or replace units covered by this warranty, without charge to the consumer for labor
and materials. YOU ARE RESPONSIBLE FOR ANY INSTALLATION OR REMOVAL CHARGES AND FOR ANY
SHIPPING CHARGES. State sales tax does not apply to warranty service work and will not be honored.
If safe components must be shipped for warranty service, AMSEC will pay the shipping charges to any
destination within the USA if the repairs are covered by the warranty. Defective parts must be returned
(not repaired unless instructed) to AMSEC. If parts are not returned, the warranty invoice will be denied.
How you can get warranty service:
(1) If your AMSEC safe requires service, contact your local authorized AMSEC dealer and the dealer
will advise you of the procedures to be followed. If this is not practical, contact the AMSEC Service
Department at the address on front cover or call 951-685-9680, ex. #1036.
(2) All warranty service must have prior authorization, accompanied by proof of purchase as
evidence of warranty coverage. A warranty authorization number must be obtained from AMSEC
before any service work is performed. The serial number, description of product and description
of problem must be supplied to AMSEC to determine warranty status before an authorization
number will be assigned. Issuance of the authorization number recognizes only the existence of
the problem and does not constitute an admission of liability by AMSEC. Only approved service
representatives will be authorized to perform warranty service. Any service performed prior to
issuance of a warranty authorization number will be subject to denial.
Limitation of Implied Warranties:
Any implied warranties, including warranties of merchantability and fitness for a particular purpose, are
limited in duration to the length of this warranty.
Exclusions of Damages:
AMSEC’s liability for any defective products is limited to repair or replacement of the product, at our
option.
AMSEC shall not be liable for damages based upon inconvenience, loss of use, damage or loss of
contents, or any other damages whether incidental, consequential or otherwise.
PURCHASE RECORD
Model #:___________________________________________________________
Serial #:_ __________________________________________________________
Date of Purchase:___________________________________________________
Purchased From:____________________________________________________
Company:__________________________________________________________
Address:___________________________________________________________
City__________________________ State_________ Zip Code_ _____________
Telephone #:_ ______________________________________________________
Email Address:_ ____________________________________________________
Website:___________________________________________________________
RECORD YOUR COMBINATION AND KEY NUMBERS HERE
(STORE IN A SAFE PLACE)
Personal Combination:
_________
_________
_________
OneTwoThree
Key Number: _______________________________________________________
February 1, 2012
Limited Warranty/
Conditions of Sale
Limited Warranty
Keying Systems
All bittings shall be originated or authorized by the ARROW LOCK® Key Systems Department to be compatible with
one another in a specific type of cylinder (conventional, security, high security, interchangeable core, removable core)
and within a particular keying system.
ARROW LOCK® will not pay for the cost of repair performed other than in accordance with this warranty.
Refer to our Returned Goods Policy regarding the return of a product or component part believed to be defective as
covered by this warranty. A brief description of the defect will be required. Product will be examined upon return. In the
event such examination reveals a defect covered by this warranty, the product will be repaired or replaced.
THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES. TO THE EXTENT PERMITTED BY
LAW, ALL IMPLIED WARRANTIES ARE LIMITED TO THE DURATION OF THIS WARRANTY. ARROW LOCK®
MANUFACTURING COMPANY SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL
DAMAGES. NO AGENT, SALES REPRESENTATIVE OR DEALER HAS THE AUTHORITY TO INCREASE OR
ALTER THE OBLIGATIONS OF THIS WARRANTY.
SOME STATE DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR
THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS
WHICH VARY FROM STATE TO STATE.
ARROW LOCK® Manufacturing Company
ASSA ABLOY, the global leader
in door opening solutions
3
TWIN V-10, TWIN EXCLUSIVE, TWIN PRO,
TWIN MAXIMUM, C4 CLIQ
Product Catalog
& Technical
Specifications
Page: 5
Keys and Keying
All ASSA keys are manufactured from the highest quality nickel
silver material. The key’s rounded back facilitates smooth
operation and minimizes wear. The large key bow simplifies
identification and use by manually impaired people.
Keys can be provided with various options of
tactile identification upon request. Available
in several profiles or broaches, ASSA high
security keys all feature a unique side
milling on the lower portion of the key blade
and are precut at the ASSA factory. Each side
milling represents a key section that is
factory controlled on a geographic basis
providing an unmatched level of patented key control.
Benefits
• Two sets of key cuts designed to operate independent locking mechanisms
• Innovative key design protected by U.S. and international patents
• Patented key control offers the ultimate in high security
• Top cuts can be generated on standard, quality code cutting equipment
• ASSA’s generous keying capabilities allow over 160,000 change keys under a single master key
Warranty
• ASSA guarantees that if a key should break under normal usage, ASSA will replace it at no charge plus any reasonable
service charge
• ASSA guarantees that no other top level master key for any other ASSA factory generated master key system will
operate as a top level key in an end-user’s system for a specified geographic territory
• ASSA guarantees its patented systems against unauthorized key duplication
Certification
• Twin Exclusive, Twin V-10, Twin Pro and Twin Maximum keys listed under U.S. Patent numbers 5,067,335 and 5,640,865
Technical Information
• High quality nickel silver material
• Key combination is read from tip to bow
• No. 1 cut is deepest, No. 9 is shallowest
• Maximum adjacent cut is 5 (example: 1-6 is acceptable, 1-7, 8 or 9 is not)
• Cut depth is measured as root depth from back of key to bottom of cut
Special stamping and custom coining available
TWIN V-10, TWIN EXCLUSIVE, TWIN PRO,
TWIN MAXIMUM, C4 CLIQ
Product Catalog
& Technical
Specifications
Page: 8
ASSA Concept 4 CLIQ™
ASSA C4 CLIQ™ intelligent locking systems gives control over all
keys, which can easily be upgraded and can be tailor-made
to suit any needs. Since every key has its own identity,
it becomes the “personal property” of the key holder.
C4 CLIQ makes intelligent, flexible and high security lock
systems possible. The key’s mechanical design creates
the basic foundation made up of different security
zones in the same way as in mechanical lock
systems. The electronic programming
of the keys gives authorization to
individuals or to group of individuals.
C4 CLIQ technology’s basic idea is the
creation of an intelligent security system.
That means a lock system that retains a high level of security despite upgrading,
alterations or expansion. Even after many years of use by a continual flow of new
tenants, new employees or changes occurring in the workplace, the level of security
will remain the same.
ASSA C4 CLIQ offers HID Prox Chips
To match your existing HID Prox Access Control System. This allows that person to access the existing system with
one credential.
Benefits
Warranty
Technical Information
• Based on Twin Maximum
Technology
• Battery Life 2 Years or 20K Openings
• Power Supply is Provided by the Key
• Lifetime on Key Breakage
• Data Transfer 64 Bit and Higher
Certification
• Water Resistant
• Patented Key Control
• Sealed Electronics
• UL Listed
• No Wires
• Operating Temperatures:
-40° F to 130° F
• 3 Levels of Cylinders and Keying:
• High and Medium Security Levels
• Extreme Master Keying Capacity
• Concealed Keying
• Wide Range of Retrofit
Cylinder Shapes
• Possible to Add C4 CLIQ
Functionality
• HID Prox Chip
– Twin Maximum UL 437
Cylinder & Key
– Twin Maximum Medium Non
Cylinder and Twin Maximum
Key UL 437
– Twin C4 CLIQ Electromechanical
Cylinder and Key
TWIN V-10, TWIN EXCLUSIVE, TWIN PRO,
TWIN MAXIMUM, C4 CLIQ
Product Catalog
& Technical
Specifications
Mortise Cylinders
ASSA mortise cylinders are designed to replace several
original manufacturers’ cylinders in their locksets offering
the highest level of security available on the market today.
Made to standard U.S. dimensions, these rugged cylinders
are available in a variety of finishes and lengths and stand
up to even the heaviest abuse. All ASSA mortise cylinders
are listed under U.L. 437, a set of tests for determining the
cylinder's physical resistance against various forms of attack.
ASSA mortise cylinders will improve the security of standard
mortise locksets by Arrow, Corbin/Russwin, Sargent, Schlage,
Yale and many other manufacturers.
Benefits:
• Drill resistant cylinder housing and plug
• Case-hardened steel inserts and stainless steel pins
• Two independent locking mechanisms to ensure optimum pick resistance
• Inactive “false” grooves on side pins designed to catch picking tools
• Extremely close tolerances
• Can be easily rekeyed in the field
• With the purchase of one inexpensive kit, 1-1/8" mortise cylinder is easily converted to rim cylinder
Warranty:
• ASSA guarantees its cylinders against defective workmanship or wear resulting from defects for life
Certification:
• All ASSA Twin Series Mortise cylinders are U.L. 437 listed as well as ASTM F 1577 6.6 listed for standard test
methods for detention Locks.
Technical Information:
• Available in cylinder lengths 1-1/8" through 2" in 1/8" increments
• Available with limited rotation and/or unidirectional features
• 13 cam options available
• Cylinder housing and plug are made of high quality brass
• Stainless steel top pins
• Bottom pins and master pins are nickel silver
Finishes:
BHMA Symbol
625
626
605
606
612
624
U.S. Symbol
US 26
US 26D
US 3
US 4
US 10
US 10B
Euro Finishes
11
13
20
23
33
46
Description
Bright Chrome
Satin Chrome
Bright Brass
Satin Brass
Satin Bronze
Dark Oxidized Bronze
Page: 12
TWIN V-10, TWIN EXCLUSIVE, TWIN PRO,
TWIN MAXIMUM, C4 CLIQ
Product Catalog
& Technical
Specifications
Page: 20
High Security Mogul Cylinders
ASSA Mogul cylinders are designed to provide the
maximum level of security and durability. Available
for ADTEC, Folger Adam, AirTeq/Norment, R.R. Brink,
Sargent, and Southern Steel detention locksets,
the ASSA Mogul is the smart choice for today’s
corrections industry. A hardened cover plate
and hardened steel inserts in the cylinder shell
provide protection against even the most savage and
determined forms of physical attack. As with all ASSA high
security cylinders, our patented key control ensures the ultimate
protection against unauthorized key duplication.
Benefits:
• Hardened plug cover plate to prevent drill attack
• Case-hardened steel inserts and stainless steel pins
• Two independent locking mechanisms to ensure security and optimum pick resistance
• Inactive “false” grooves on side pins designed to enhance pick resistance
• Counter mill in each chamber position to further enhance pick resistance
• Extremely close tolerances
• Can be easily rekeyed in the field
Warranty:
• ASSA guarantees its cylinders against defective workmanship or wear resulting from defects for life
Certification:
• All ASSA Twin Series Mogul cylinders are U.L. 437 listed as well as ASTM F 1577 6.6 Certified for standard test methods
for Detention Locks
Technical Information:
• Available in 1-1/8" and 1-1/2" lengths
• Available with limited rotation and/or unidirectional features
• Cylinder housing and plug are made of high quality brass
• Stainless steel top pins
• Bottom pins and master pins are nickel silver
Finishes:
BHMA Symbol
626
606
U.S. Symbol
US 26D
US 4
Euro Finish
13
23
Description
Satin Chrome
Satin Brass
TWIN V-10, TWIN EXCLUSIVE, TWIN PRO,
TWIN MAXIMUM, C4 CLIQ
Product Catalog
& Technical
Specifications
Page: 25
Rim Cylinders
Commonly used on apartment and condominium
doors, ASSA rim cylinders are used on vertical
deadbolt locks and are also designed for
commercial exit and panic devices. Available
with either horizontal/vertical break-off or
lazy-motion type break-off tailpieces, ASSA
rim cylinders can be ordered with the standard
or the Sargent rim exit device mounting patterns.
The standard rim cylinder can be easily converted to
a mortise cylinder by simply replacing the rim tailpiece
assembly with the appropriate cam.
Benefits:
• Drill resistant cylinder housing and plug
• Case-hardened steel inserts and stainless steel pins
• Two independent locking mechanisms to ensure security and optimum pick resistance
• Inactive “false” grooves on side pins designed to catch picking tools
• Extremely close tolerances
• Can be easily rekeyed in the field
• Standard and Sargent hole pattern available
• Standard rim cylinder is easily converted to mortise cylinder
Warranty:
• ASSA guarantees its cylinders against defective workmanship or wear resulting from defects for life
Certification:
• All ASSA Twin Series Rim cylinders are U.L. 437 Listed as well as ASTM F 1577 6.6 Certified for standard test methods for
Detention Locks
Technical Information:
• Available with limited rotation and/or unidirectional features
• Cylinder housing and plug are made of high quality brass
• Stainless steel top pins
• Bottom pins and master pins are nickel silver
Finishes:
BHMA Symbol
625
626
605
606
612
624
U.S. Symbol
US 26
US 26D
US 3
US 4
US 10
US 10B
Euro Finish
11
13
20
23
33
46
Description
Bright Chrome
Satin Chrome
Bright Brass
Satin Brass
Satin Bronze
Dark Oxidized Bronze
TWIN V-10, TWIN EXCLUSIVE, TWIN PRO,
TWIN MAXIMUM, C4 CLIQ
Product Catalog
& Technical
Specifications
Page: 29
Mortise and Rim Interchangeable Core Cylinders
Designed with both security and convenience in mind,
the ASSA Large Format Interchangeable core cylinder is
perfect for apartment buildings, dormitories, classrooms,
and other applications requiring instant rekeying
capabilities. This versatile cylinder is adaptable to a wide
variety of manufacturers’ locksets including the ASSA Number 2
padlock and ASSA 6000 deadbolt series and can be integrated into
master keyed systems that use both standard and interchangeable
cylinders. Available in the standard ASSA large format as well as the Schlage,
Yale 6 pin, and Sargent 6 pin large formats, all ASSA Interchangeable core cylinders are
listed under U.L. 437, a set of tests for determining the cylinder's physical resistance
against various forms of attack and performance that features our patented key control
ensuring the maximum protection from unauthorized key duplication.
Benefits:
• Easily rekeyed openings in the field
• Can be used in master key system with standard locks
• Available in multiple manufacturers’ formats
• Drill resistant cylinder housing and plug
• Case-hardened steel inserts and stainless steel pins
• Two independent locking mechanisms to ensure security and optimum pick resistance
• Inactive “false” grooves on side pins designed to catch picking tools
Warranty:
• ASSA guarantees its cylinders against defective workmanship or wear resulting from defects for life
Certification:
• All ASSA Interchangeable Core cylinders are U.L. 437 Listed as well as ASTM F 1577 6.6 Certified for standard test
methods for Detention Locks
Technical Information
• Available for 1-1/4" mortise and rim cylinders
• Build-up pins in first four positions operate control feature
• Cylinder housing and interchangeable core are made of high quality brass
• Stainless steel top pins
• Bottom pins and master pins are nickel silver
Finishes:
BHMA Symbol
625
626
605
606
612
624
U.S. Symbol
US 26
US 26D
US 3
US 4
US 10
US 10B
Euro Finishes
11
13
20
23
33
46
Description
Bright Chrome
Satin Chrome
Bright Brass
Satin Brass
Satin Bronze
Dark Oxidized Bronze
TWIN V-10, TWIN EXCLUSIVE, TWIN PRO,
TWIN MAXIMUM, C4 CLIQ
Product Catalog
& Technical
Specifications
Key-in-Knob/Lever Cylinders
ASSA Key in Knob/Key in Lever cylinders
are designed to replace several original
manufacturers’ cylinders in their locksets
offering the highest level of security available
on the market today. These cylinders are
manufactured to exact manufacturers’ specifications
to ensure precise fit and operation. ASSA Key in
Knob/Key in Lever cylinders will improve the security
of standard cylindrical locksets by Arrow, Corbin/Russwin,
Falcon, Sargent, Schlage, Weiser, Yale and many other
manufacturers. All ASSA Key in Knob/Key in Lever cylinders
are listed under U.L. 437.
Benefits:
• Designed to exact manufacturers’ specifications
• Two independent locking mechanisms to ensure security and optimum pick resistance
• Inactive “false” grooves on side pins designed to catch picking tools
• Extremely close tolerances
• Can be easily rekeyed in the field
• Patented key control
Warranty:
• ASSA guarantees its cylinders against defective workmanship or wear resulting from defects for life
Certification:
• All ASSA Key-in-Knob/Lever cylinders are U.L. 437 listed
Technical Information:
• Available in 16 different retrofit assemblies
• Cylinder shell and plug made of high quality brass
• Stainless steel top pins
• Bottom pins and master pins are nickel silver
Finishes:
BHMA Symbol
625
626
605
606
612
624
U.S. Symbol
US 26
US 26D
US 3
US 4
US 10
US 10B
Euro Finishes
11
13
20
23
33
46
Description
Bright Chrome
Satin Chrome
Bright Brass
Satin Brass
Satin Bronze
Dark Oxidized Bronze
Page: 33
TWIN V-10, TWIN EXCLUSIVE, TWIN PRO,
TWIN MAXIMUM, C4 CLIQ
Product Catalog
& Technical
Specifications
Page: 42
Deadbolts
The ASSA 6000 Series deadbolt is designed to withstand
any form of physical attack including drilling, prying, driving,
or pulling. Its free spinning guard collars protect it from
pipe wrenching while its hardened inserts guard against
drilling. The 6000 comes equipped with the ASSA Hardhat ™
to protect it from outside through-the-door attacks
known as “ice picking.” All ASSA 6000 Series
deadbolts are available with interchangeable core
and feature our unique dual locking mechanism rendering them virtually pick proof.
As with all ASSA high security cylinders, our patented key control ensures the ultimate
protection against unauthorized key duplication.
Benefits:
• ASSA Hardhat™ to prevent physical attack
• Free spinning guard collars to prevent wrenching
• Available in interchangeable core
• High security solid brass cylinders
• 1/4" Aircraft strength steel mounting bolts
• Hardened bolt with full 1" throw
• Non-handed
• Patented key control
Warranty:
• ASSA guarantees its products against defective workmanship or wear resulting from defects for life Certification
Certification:
• All ASSA 6000 Deadbolts are U.L. 437 Listed as well as ASTM F 1577 6.6 Certified for standard test methods for
Detention Locks
Technical Information:
• Available in single and double cylinder and no thumb turn inside models
• Available in 2-3/8" and 2-3/4" backsets drive-in or face plate
• Available 1-3/8" to 2-1/2" door thickness, 1-3/4" standard
• Cylinder housing and plug made of high quality brass
• Stainless steel top pins
• Bottom pins and master pins are nickel silver
Finishes:
BHMA Symbol
625
626
605
606
609
612
624
U.S. Symbol
US 26
US 26D
US 3
US 4
US 5
US 10
US 10B
Euro Finishes
11
13
20
23
47
33
46
Description
Bright Chrome
Satin Chrome
Bright Brass
Satin Brass
Antique Brass
Satin Bronze
Dark Oxidized Bronze
TWIN V-10, TWIN EXCLUSIVE, TWIN PRO,
TWIN MAXIMUM, C4 CLIQ
Product Catalog
& Technical
Specifications
Auxiliary Locks
ASSA’s auxiliary lock line brings the same level
of patented key control and durability to cam
locks, window locks, drawer and desk locks,
and tube locks that are standard for all of
our high security products. All of our
auxiliary locks can be keyed into an
existing or new master key system and are
operated by the same 6 pin uniquely side
coded keys as the rest of our high security
line eliminating the need for maintaining
separate key systems.
Benefits:
• All locks operated by the same high security key
• Unlimited number of applications
• Two independent locking mechanisms to ensure security and optimum pick resistance
• Inactive “false” grooves on side pins designed to catch picking tools
• Can be easily rekeyed in the field
• Patented key control
Warranty:
• ASSA guarantees its products against defective workmanship or wear resulting from defects for life
Technical Information:
• Cylinder housing and plug made of high quality brass
• Stainless steel top pins
• Bottom pins and master pins are nickel silver
Page: 50
TWIN V-10, TWIN EXCLUSIVE, TWIN PRO,
TWIN MAXIMUM, C4 CLIQ
Product Catalog
& Technical
Specifications
Cam Locks
ASSA manufactures the most rugged high security cam
locks on the market today. The sturdy design makes
it perfect for inner safe doors and compartments,
cash storage containers, drug carts, gun cabinets,
alarm control panels, and key storage cabinets.
ASSA cam locks are operated with the same ASSA
6 pin high security key as the rest of our product
offering and are available in both key retaining and
non-key retaining models.
Benefits:
• Operated by 6 pin high security key
• Available in key retaining and non-key retaining
• 31 different catches available
• Two independent locking mechanisms to ensure security and optimum pick resistance
• Inactive “false” grooves on side pins designed to catch picking tools
• Patented key control
Warranty:
• ASSA guarantees its products against defective workmanship or wear resulting from defects for life
Certification:
• UL 437 (Pending)
Technical Information:
• Installation prep 22 mm, 7/8" Double "D" (punch available from ASSA)
• Uses hollowed out interchangeable core drivers
• Body and plug chromium plated brass
• Stainless steel top pins
• Bottom pins and master pins are nickel silver
Finishes:
BHMA Symbol
625
U.S. Symbol
US 26
Euro Finish
11
Description
Bright Chrome
Page: 51
TWIN V-10, TWIN EXCLUSIVE, TWIN PRO,
TWIN MAXIMUM, C4 CLIQ
Product Catalog
& Technical
Specifications
Utility Locks
This is truly an innovative lock assembly. A rugged
cast aluminum housing and strike assembly holds
a solid brass six pin high security cylinder. ASSA
Utility Locks are used to secure sliding glass or wood
doors, storage cabinets, and windows. They can be keyed
into any ASSA key system or used as a stand alone locking
device. The body is finished with baked on white enamel.
This assembly locks with just one push of your thumb or finger, as easy
as locking a file cabinet. The Utility Lock comes with all of its own mounting
hardware for standard wood frame applications and shims for uneven surfaces.
Benefits:
• 6 pin high security cylinder
• Two independent locking mechanisms to ensure security and optimum pick resistance
• Inactive "false" grooves on side pins designed to catch picking tools
• Patented key control
Warranty:
• ASSA guarantees its products against defective workmanship or wear resulting from defects for life
Certification:
• UL 437 (Pending)
Technical Information:
• Cast aluminum housing
• Cast aluminum rim and mortise strike
• Cylinder body and plug high quality brass
• Stainless steel top pins
• Bottom pins and master pins are nickel silver
Page: 52
TWIN V-10, TWIN EXCLUSIVE, TWIN PRO,
TWIN MAXIMUM, C4 CLIQ
Product Catalog
& Technical
Specifications
Page: 53
Cabinet Locks
ASSA manufactures the finest quality
cabinet and desk locks featuring our
high security eleven pin cylinders.
These locks are listed with Underwriters
Laboratories as U.L. 437. Our cabinet
and desk locks can be keyed into any
ASSA master key system. The cylinder
can be easily rekeyed by removing the
setscrew on the side of the
cylinder housing.
700AS – 138
Benefits:
850AS – 078
• ASSA U.L. 437 high security cylinder
• Setscrew for easy rekeying
• Two independent locking mechanisms to ensure security and optimum pick resistance
• Inactive “false” grooves on side pins designed to catch picking tools
• Patented key control
800AS – 138
850AS – 138
Warranty:
• ASSA guarantees its products against defective workmanship or wear resulting from defects for life
Certification:
• All ASSA Cabinet/Drawer lock cylinders are U.L. 437 listed
Technical Information:
• Available with plastic spacer and strike
• Cabinet lock available with horizontal or vertical bolt
• Desk lock available in 7/8" and 1-3/8" mounting thickness
• Bolt material high quality brass
• Stainless steel top pins
• Bottom pins and master pins are nickel silver
Finishes:
BHMA Symbol
626
605
U.S. Symbol
US 26D
US 3
Euro Finishes
13
20
Description
Satin Chrome
Bright Brass
TWIN V-10, TWIN EXCLUSIVE, TWIN PRO,
TWIN MAXIMUM, C4 CLIQ
Product Catalog
& Technical
Specifications
Keyswitch Locks
The ASSA Switch Lock is the newest addition
to our family of high security products.
Combining state-of-the-art Securitron®
designed electronic technology with the
versatility of an ASSA high security non-key
retaining cam lock, this product is the key
switch of the future. The switch lock is fully
reversible from maintained to momentary
and can be integrated into any new or
existing ASSA master key system.
Benefits:
• Long operating life
• Elongated mounting hole for easier, more accurate mounting
• Choice of actuation (plunger as well as a variety of integral and auxiliary actuators)
• Choice of electrical termination (solder, quick connect, PCB)
• Available with standard or narrow stile mounting plate with LED
• Patented key control
Warranty:
• ASSA guarantees its products against defective workmanship or wear resulting from defects for life
Technical Information:
• Single pull double throw (SPDT) pin actuator and solder
termination standard
• 3 amp at 12 or 24 VDC
• Uses hollowed out interchangeable core drivers
• Body and plug chromium plated brass
• Stainless steel top pins
• Bottom pins and master pins are nickel silver
Finishes:
BHMA Symbol
626
U.S. Symbol
US 26D
Euro Finishes
13
Description
Satin Chrome
Page: 54
TWIN V-10, TWIN EXCLUSIVE, TWIN PRO,
TWIN MAXIMUM, C4 CLIQ
Product Catalog
& Technical
Specifications
Page: 67
Padlocks
ASSA manufactures high security
padlocks in three classes, all of
which can be integrated into any
new or existing ASSA master key
system. Our heavy duty padlocks
are made from the highest quality
materials and have withstood the
most rigorous testing procedures.
ASSA padlocks are used in a wide
variety of applications including
storage rooms, perimeter fences,
and armories and feature the same
level of patented key control
as all ASSA high security cylinders.
Benefits:
• Sturdy design ensures maximum durability
• Class 2 available in key retaining and non-key retaining, extended shackle, and interchangeable core
• Shackle made of rust proof stainless steel
• Hockey Puck style shackleless design provides maximum protection against hacksaw and bolt cutter attacks
• Drain holes to prevent freezing
• No external screws or rivets
• Patented key control
Warranty:
• ASSA guarantees its products against defective workmanship or wear resulting from defects for life
Certification:
• All ASSA Padlock cylinders are U.L. 437 listed
Technical Information:
• Class 2 body extruded brass, stainless steel shackle, tensile strength 1.5 tons
• Class 3 body case hardened steel, stainless steel shackle, tensile strength 4.5 tons
• Class 2 convertible from key retaining to non-key retaining
• Hockey Puck style body can withstand up to 10,000 lbs of force from bolt cutters
• Stainless steel top pins
• Bottom pins and master pins are nickel silver
TWIN V-10, TWIN EXCLUSIVE, TWIN PRO,
TWIN MAXIMUM, C4 CLIQ
Product Catalog
& Technical
Specifications
Page: 74
Profile Cylinders
ASSA manufactures a wide variety of high security European
style profile cylinders including the Scandinavian oval
cylinder used in ASSA modular locksets,
the Euro Din cylinder, and the British
Oval cylinder. Available for different
door thicknesses and featuring
Euro Din Single
Cylinder No
an adjustable cam actuator, ASSA
Thumbturn
profile cylinders can be used with
Euro Din
Double Cylinder
many types of imported lockset and
specialty hardware. All profile cylinders
Oval Outside
Cylinder
are protected with ASSA’s patented
Euro Din Single Cylinder
key control and can be keyed into
Large Thumbturn
any new or existing ASSA key system.
British Oval
Double Cylinder
Benefits:
• Retrofits wide variety of European applications
• Adjustable cam actuator
• Two independent locking mechanisms to ensure security and optimum pick resistance
• Inactive "false" grooves on side pins designed to catch picking tools
• Patented key control
Warranty:
• ASSA guarantees its products against defective workmanship or wear resulting from defects for life
Certification:
• All ASSA Profile Cylinders are U.L. 437 listed
Technical Information:
• Euro Din and British Oval available for 3 different door thicknesses
• Cylinder housing and plug made of high quality brass
• Stainless steel top pins
• Bottom pins and master pins are nickel silver
Finishes:
BHMA Symbol
625
626
605
606
612
624
U.S. Symbol
US 26
US 26D
US 3
US 4
US 10
US 10B
Euro Finishes
11
13
20
23
33
46
Description
Bright Chrome
Satin Chrome
Bright Brass
Satin Brass
Satin Bronze
Dark Oxidized Bronze
Warranty
LIMITED WARRANTY AND EXCLUSIONS:
CCL strives to produce quality products at reasonable prices. If you are not satisfied with our product because of a defect, we will
repair or replace the defective part or parts free of charge for a period of one year from the date of purchase. In the event you claim
that the product contains a defect, simply notify CCL of the defect, and we will arrange for repair or replacement. The sole and
exclusive remedy against CCL relating in any way to a product defect shall be the repair or replacement of defective parts as provided
for under this LIMITED WARRANTY. No other remedy, including, but not limited to, incidental or consequential loss, is available.
This LIMITED WARRANTY shall not be deemed to have failed of its essential purpose so long as CCL is willing and able to repair or
replace defective parts in the manner prescribed in this LIMITED WARRANTY.
Any action for breach relating to the sale of an CCL product must be commenced within one year after the cause of action has a
ccrued. This LIMITED WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EXPRESS OR IMPLIED, AND ALL SUCH WARRANTIES
ARE EXCLUDED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE.
LOST COMBINATIONS ARE NOT COVERED BY WARRANTY.
©Copyright 2011 CCL
ORDER SPECIFICATIONS
DELIVERY
M
M
M
M
Specify Keyed Alike, Keyed Different or Keyed Different and Master
Keyed when ordering. Specify finish.
Specify Key Codes for Keyed Alike Orders.
See catalog charts for exact number of KA codes and Key availability
for all products, and KA code exceptions.
Stocking Locations
CompX National
PO Box 200
Mauldin, SC 29662
Phone: (864) 297-6655
Fax: (864) 297-9987
CompX National
M
M
M
M
M
Pin Tumbler stocking codes (4)...101, 103, 107, and 915.
Pin Tumbler-Satin Brass stocking codes (2)...107 and 915.
Disc Tumbler stocking codes (10)...C346A, C390A, C413A, C415A,
C420A, and C642A. New key codes: C205A, C267A, C361A, C441A.
All C8850 Core Removable plugs come Master keyed to E13A.
KA stocking codes (20)...D003A, D054A, D071A, D084A, D091A,
D177A, D233A, D256A, D284A, D313A, D346A, D362A, D390A,
D413A, D415A, D420A, D435A, D512A, D554A, and D642A.
KA exceptions:
Disc Tumbler
C8042, C8051-3, C8052-3, C8054-3, and 4G,
C8705 (all finishes) and C8706-3 available only
to C346A, C413A, and C415A.
C8751, C8754, C8758, and C8759 available only
to C413A, C415A, and C420A.
C8747, C8749, C8896, D8950, D8951, and D8952
available only to C415A.
C8046 and C8047 available only to P141A.
Pin Tumbler
M
CompX National
WESTERN DISTRIBUTION CENTER
9370 Buffalo Avenue, Unit 104
Rancho Cucamonga, CA 91730
Phone: (909) 476-7933
Fax: (909) 476-8553
Service Policy: Stock items shipped 95% complete within 24 hours
after receipt of order.
WARRANTY
CompX Security Products liability on any claims, including those for defective
material or finishes, is limited to refund, repair, replacement or a combination
of such actions as we may elect for a period of one year from date of
delivery. CompX Security Products accepts no liability as relates to the buyers
application or use of our products.
C8142-26D available to standard 4 codes plus 105
and 106.
C8150-26D available to standard 4 codes plus 102.
C8154 available only to 103, 107, and 915.
C8155 available only to 915.
CompX Fort
M
M
MFW23000 Series-stocking codes (5)...217, 221, 224, 237 and 238.
MFW29000 Double Bitted Series-stocking codes (5)...3012, 3045,
3059, 3085 and 3165.
M SD990 and Single Bitted Switch Locks-stocking codes (5)...217, 221,
224, 237 and 238.
M Tubular Cam Locks and Inner Cylinders-stocking codes (7)...79, 80, 81,
82, 83, 84 and 85.
M KA exceptions:
MFW23000 Series Brass Locks-stocking codes (2)...217 and 221.
MFW23006, 23007 and 23008-Stainless and Brass (1)...217.
Tubular Switch Locks (5)...79, 80, 81, 82 and 83.
Tubular Threaded Locks (3)...79, 80, and 81.
Tubular DR1008 and SD1990 (2)...79 and 80.
TL-37 (1)...1339; 1T-058 (3)...01, 02 and 24
MFWLTO58 (1)...55, MFWLTO78 (3)...26, 55 and 78.
CompX Chicago
M
C5001LP and C5002LP-stocking codes (6)...1X03, 1X04, 1X20, 2X01,
2X02 and 3X5.
M CEXP-19DC-stocking codes (1)...5X75.
M See catalog for stocking codes for other products.
Reorder #: F2644-008
CompX Timberline
M
All Lock Plugs in all six finishes-stocking codes (10)...100T-109T.
864.297.6655
compx.com
PO Box 200
Mauldin, SC 29662
Copyright 2011
© CompX Security Products
Limited Warranty
All Other Corbin Russwin Products.............................................................................................................................. 1 year
MicroShield® Finish............................................................................................................................................................ 1 year
Infini-T® Finish.................................................................................................................................................................. Lifetime
Finishes:
Corbin Russwin finishes are covered by a limited warranty period of one year after invoice date. Infini-T®
finish is warranted against corrosion and tarnishing for lifetime of the product.
Corbin Russwin, Inc. (Company) warrants that its products sold under the Corbin Russwin and Design®
trade name in the United States of America are free from defects in workmanship and materials under
normal use and service. This warranty does not cover defects or damage arising from improper installation,
lack of or improper maintenance, improper storage, shipping and handling, corrosion, erosion, ordinary
wear and tear, misuse, abuse, accident, unauthorized service, or use with unauthorized non-Corbin
Russwin products or parts. This warranty is void if any modification is made to the warranty product,
regardless of whether the modification causes or contributes to the alleged defect. All modifications are
made at the risk of the party making the modification.
The only liability of the Company in tort or contract whether under this warranty or otherwise shall
be limited to the repair or replacement of any product or component part which shall prove defective
as covered by this warranty, within the stated time frame listed below, after delivery to the original
purchaser.
Pyramid Cylinders..............................................................................................................................................................5 years
CL3200 Series Security Bolt Lever Locksets..............................................................................................................2 years
CL3300 Series Cylindrical Locksets..............................................................................................................................7 years
CL3500 Series Cylindrical Locksets..............................................................................................................................7 years
CL3800 Series Cylindrical Locksets..............................................................................................................................7 years
ML2000 Series Mortise Locksets...............................................................................................................................10 years
Electrified Locksets............................................................................................................................................................2 years
ED6000, ED7000, ED8000 Series Exit Devices & Trim............................................................................................ 1 year
ED4000, ED5000 Series Exit Devices & 900 Series Trim.......................................................................................5 years
All Other Exit Device Trim................................................................................................................................................ 1 year
Electrified Exit Devices.....................................................................................................................................................2 years
FE6800...................................................................................................................................................................................7 years
FE6700...................................................................................................................................................................................7 years
Access 600™ CL33600 x TCRNE1 Cylindrical.........................................7 years (mechanical), 2 years (electrical)
Access 600™ ML20600 x TCRNE1 Mortise Locks.............................. 10 years (mechanical), 2 years (electrical)
Access 600™ ED5000N x 9600 x TCRNE1 Exit Devices......................5 years (mechanical), 2 years (electrical)
Access 700® CL33700 x TCPAC1 Cylindrical..........................................7 years (mechanical), 2 years (electrical)
Access 700® ML20700 x TCPAC1 Mortise Locks................................ 10 years (mechanical), 2 years (electrical)
Access 700® ED5000N x 9700 x TCPAC1 Exit Devices........................5 years (mechanical), 2 years (electrical)
Access 700® CL33700 x TCPWI1 Cylindrical..........................................7 years (mechanical), 2 years (electrical)
Access 700® ML20700 x TCPWI1 Mortise Locks................................ 10 years (mechanical), 2 years (electrical)
Access 700® ED5000N x 9700 x TCPWI1 Exit Devices........................5 years (mechanical), 2 years (electrical)
Access 800® CL33800 x TCNE1 Cylindrical.............................................7 years (mechanical), 2 years (electrical)
Access 800® ML20800 x TCNE1 Mortise Locks................................... 10 years (mechanical), 2 years (electrical)
Access 800® ED5000N x 9800 x TCNE1 Exit Devices...........................5 years (mechanical), 2 years (electrical)
Access 800® CL33800 x TCAC2 Cylindrical.............................................7 years (mechanical), 2 years (electrical)
Access 800® ML20800 x TCAC2 Mortise Locks.................................. 10 years (mechanical), 2 years (electrical)
Access 800® ED5000 x 9800 x TCAC2 Exit Devices...........................5 years (mechanical), 2 years (electrical)
DC3200 Series Closers.....................................................................................................................................................5 years
DC4600 Series Closers.....................................................................................................................................................2 years
DC6200 & DC6400 Series Closers............................................................................................................................10 years
DC8000 Series Closers..................................................................................................................................................10 years
Warranty Requirements for Cylinders Factory or Field Combinated:
Cylinders shall be periodically lubricated depending on environmental conditions. Dry graphite,
molybdenum disulfide or Polylube™ are recommended. Petroleum-based liquid lubricants should only
be used in cylinders in harsh or corrosive environments and should not be mixed with dry lubricants.
Warranty Requirements for Cylinders Field Combinated:
1. Keys shall be cut to the Corbin Russwin key bitting specifications required for the particular keyway and depth system.
2. All pin lengths shall be selected according to prevailing factory standards.
3. Original Corbin Russwin cylinders and cylinder components, including pin tumblers and key blanks, shall be used.
We reserve the right to void the warranty if we deem that a malfunction is a result of non-original
components which do not conform to Corbin Russwin standards.
Keying Systems:
All bittings shall be originated or authorized by the Corbin Russwin Key Systems Department to be
compatible with one another in a specific type of cylinder (Pyramid, conventional, security, master ring,
interchangeable core) and within a particular keying system.
All components of electromagnetic products are covered by a limited warranty period of one year after
invoice date thereof of the original purchaser from us. Product repair or replacement, or associated
charges, will not be accepted under this warranty unless prior authorization from Corbin Russwin has
been given. Upon receipt of products returned for repair or replacement, we will determine whether
products qualify for repair or replacement under this warranty. If they do not, we will obtain authorization
prior to proceeding. We have no liability to pay any costs of repair performed by anyone other than
qualified personnel authorized by Corbin Russwin prior to the work being done. The Company will not pay
for the cost of repair performed other than in accordance with this warranty. Written notice of a product
or component part believed to be defective as covered by this warranty should be sent to Corbin Russwin,
Inc. 225 Episcopal Road, Berlin, CT 06037, and should include your name and address, an identification
of the product or component part and a brief description of the defect. Upon receipt of such notice, the
Company will inform you where to ship such product or component part, shipping charges prepaid, for
examination and, in the event such examination reveals defect covered by this warranty, the product
will be repaired or replaced. The Company reserves the right to replace discontinued product with an
equivalent product as deemed by the Company.
THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES. TO THE EXTENT PERMITTED BY LAW,
ALL IMPLIED WARRANTIES ARE LIMITED TO THE DURATION OF THIS WARRANTY. CORBIN RUSSWIN,
INC. SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. NO AGENT, SALES
REPRESENTATIVE OR DEALER HAS THE AUTHORITY TO INCREASE OR ALTER THE OBLIGATIONS OF THIS
WARRANTY. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS
OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
LIMITATION OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
Corbin Russwin Architectural Hardware • 225 Episcopal Road, Berlin, CT 06037 • phone: 800-543-3658 • Fax 800-447-6714 • ­www.corbinrusswin.com
45019-12/09R
Warranty
Falcon Door Hardware warrants its mechanical offering of locks, exit devices and door
controls products manufactured to be free from defects in materials and workmanship for
a period of TEN (10) YEARS from the date of manufacture with the exception of the
products detailed in the table below. The terms and conditions of this new warranty
apply to Falcon Door Hardware shipments made on or after November 1st, 2008.
______________________________________________________________________
This limited warranty does not cover products that (i) are not the proper size for the application;
(ii) are not installed in accordance with Falcon’s published installation instructions; (iii) are
installed with improper or incorrect parts; (iv) have been modified, repaired, or altered in any way
without the express written consent of Falcon; (v) are used for purposes which they are not
designed or intended; (vi) are subjected to misuse, abuse, negligence, or accident; or (vii) are
grade 2 products used in educational facilities. The following costs and expenses are not
covered by the provisions of this limited warranty; (i) labor costs for the removal and reinstallation
of products; (ii) shipping and freight expenses required to return products to Falcon; (iii) normal
maintenance; and (iv) economic losses. THE PREVISIONS OF THIS WARRANTY DO NOT
APPLY TO FINISHES.
Falcon will replace the products that are found to be defective, provided said products are
returned to Falcon within fifteen (15) days of defect.
FALCON SHALL IN NO EVENT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL,
INDIRECT, SPECIAL, OR PUNITIVE DAMAGES FOR ANY CLAIM WHETHER BASED ON
CONTRACT; WARRANTY, TORT (INCLUDING, BUT NOT LIMITED TO, STRICT LIABILITY OR
NEGLIGENCE), PATENT INFRINGEMENT, OR OTHERWISE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
This limited warranty replaces all other warranties, expressed or implied, and excludes any
warranties of fitness for a particular purpose or merchantability. No agent, representative, dealer,
or employee of Falcon has the authority to increase or alter the obligations of this limited
warranty.
Note: Should the Product be considered a “consumer product” as may be covered by the
Magnuson-Moss Federal Warranty Act, please be advised that: (1) Some states do not allow
limitations on incidental or consequential damages or how long an implied warranty lasts, so that
the above limitations may not fully apply; and (2) This warranty gives specific legal rights and a
user may have rights which may vary from state to state.
PRODUCT EXCEPTION
OHC100A CONCEALED CLOSERS
8200 AUTOMATIC OPERATOR
ELECTRONICS/ELECTRIFIED
WARRANTY .
5 YEARS
2 YEARS
1 YEAR
Gabrielle,
Good Morning! Per your request please see the following warranty information:
EPG-1- Warranty 3 months
HPG-10- Warranty 3 months
The warranty for the following machines covers factory defects in material and workmanship. To validate
the warranty we must recv a Invoice and warranty card for the product, warranty reflects date of Invoice.
90 Days
3344HQT
6666HQT
747E
747XU
9120RM
9160MC
9180MC
Thanks,
Sherry
1 Year
1200PCH
1200B
1200CMB
1200CMBX
1233CMSB
1200MAX
1200MAXAA
8000MGDC
8100BG
2 Years
123TSHARK
Keri Systems, Inc. Product Warranty
Reference Document
All Keri Systems, Inc. products are warranted to the original Buyer to be free from defects in goods and workmanship for
the time period identified in the Table on pages two through four. This time period begins from the date of shipment from
Keri Systems, Inc. This Limited Warranty does not apply if accident, abuse, misuse, misapplication, modification, or
negligence has damaged the product.
NO WARRANTIES, EXPRESS OR IMPLIED, EXTEND BEYOND THE TERMS OF THIS CONTRACT. THE
GOODS SOLD ARE WITHOUT ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. IN NO EVENT SHALL KERI SYSTEMS, INC. BE RESPONSIBLE OR LIABLE FOR ANY SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES INCURRED BY THE BUYER OR ANY THIRD PARTY
ARISING OUT OF THE USE OR INABILITY TO USE THE PRODUCT, OR RESULTING FROM ANY BREACH OF
WARRANTY, OR UNDER ANY OTHER LEGAL THEORY, EVEN IF KERI SYSTEMS, INC. HAS BEEN ADVISED
OR MAY OTHERWISE HAVE REASON TO KNOW THE POSSIBILITIES OF SUCH DAMAGES.
Keri Systems, Inc.'s maximum liability under any circumstance shall be limited to the actual price paid for the product.
Some States do not allow the exclusion or limitation of implied warranties, or liability for incidental or consequential
damages. This warranty gives you specific legal rights; you may have other rights that vary from state to state. No Keri
Systems, Inc. agent, employee, or representative is authorized to make any modification, extension, or addition to this
warranty.
No affirmation or representation concerning the goods sold under this contract shall be valid unless stated in Keri
Systems, Inc. current sales literature or expressed in writing in this contract. Additionally, Keri Systems, Inc. reserves the
right to improve, modify, or enhance the specifications or composition of the product, without further notice, if it is
necessary or advisable in the judgment of Keri Systems, Inc.
Goods returned for repair, whether under warranty or not, should be returned freight prepaid and must be assigned a
Return Material Authorization (RMA) number by Keri Systems, Inc. Goods returned without an RMA number will be
refused. The customer is to provide a description of the specific problem, the goods to be returned, including serial
numbers, card ID numbers, and correct facility codes, if applicable. If exact duplicates of returned cards or tags are
requested, the customer must provide Keri Systems, Inc. with the ID numbers needed. For returned goods not covered by
the warranty, a quote for the repairs will be issued. Goods returned without a pre-approved RMA number are subject to a
$50 handling fee per shipment.
If out of warranty, only goods that can be repaired and rotated into the factory refurbished stock will be repaired. If the
unit cannot be repaired, the customer will be required to purchase a new unit. Keri Systems, Inc. reserves the right to
determine when goods are beyond economical repair. Goods beyond economical repair shall be returned to the Buyer.
Goods left over thirty (30) days without a repair authorization and a purchase order will be returned with evaluation
charges and shipping costs applied.
Page 1 of 5
P/N: 01847-001 Rev. L
Warranty
(in months)
NXT NETXTREME CONTROLLER PLATFORM
NXT-2D
2 Door Xtreme Controller
NXT-4D
4 Door Xtreme Controller
NXT-4X4
4 X 4 I/O - Optional Local Door Control Module
NXT-KIT2
NXT Two Door Distributor Kit
NXT-KIT4
NXT Four Door Distributor Kit
24
24
24
By Content
By Content
NXT SERIES PROXIMITY READERS
NXT-1R
EuroMount Proximity Reader
NXT-3R
Door Frame Proximity Reader
NXT-5R
Wall Switch Proximity Reader
NXT-RM3
Reader Interface Module (for Wiegand & MS Compatibility)
Lifetime
Lifetime
Lifetime
24
NXT PROXIMITY CARDS & TAGS
NXT-C
Clamshell Proximity Cards
NXT-I
ISO Proximit Cards (without Mag Stripe)
NXT-S
ISO Proximit Cards (with Mag Stripe)
NXT-K
Proximity Key Tag
Lifetime
12
12
Lifetime
PXL-500 TIGER II CONTROLLER PLATFORM
PXL-500P
Tiger II Controller
PXL-500W
Tiger II Controller
SB-593
Satellite II Expansion Board
TDK-500
Two Door Kit
CU-500
Chip Upgrade
24
24
24
By Content
24
CONNECTIVITY PRODUCTS
LAN-520
LAN Port
NC-485
485-Network Converter
KWX-9A
Wireless Transceiver, 915MHz
ANT-91
Antenna, Remote Wiring
ANT-94
Antenna, Omni-Directional Extended Range
ANT-9Y
Antenna, Unidirectional Extended Range (Yagi)
KWX-24
Wireless Transceiver, 2.4GHz
ANT-241
Antenna, Remote Wiring
ANT-244
Antenna, Omni-Directional Extended Range
ANT-24Y
Antenna, Unidirectional Extended Range
12
12
12
12
12
12
12
12
12
12
SOFTWARE & ACCESSORIES
DOORS
Software on CD Rom (Includes manual on CD) when ordered w/system
Manual
Hard Copy of DOORS Manual
DB-300
DOORs Badging Software
Import/Export
License fee for Import/Export of cardholder databases
N/A
N/A
N/A
N/A
MS SERIES PROXIMITY READERS
MS-3000X
MicroStar TM Reader
MS-4000X
ShootingStar TM Reader
MS-5000BX
MiniStar TM Reader - Black
MS-5000WX
MiniStar TM Reader - White
MS-7000BX
SuperStar TM Reader
Lifetime
Lifetime
Lifetime
Lifetime
Lifetime
INTELLIPROX 2000
IP-2003X
MicroStar TM
IP-2005BX
MiniStar TM - Black
SM-2000X
Smart Module
HPP-22
Hand Held Programmer
KDP-552
Cable (SM-2000 / PC)
D-Lite
D-Lite Software CD
NR= NON REFUNDABLE
Lifetime/36
Lifetime/36
36
12
12
N/A
2
(Reader/SM)
(Reader/SM)
December 2009
Warranty
(in months)
PROXIMITY CARDS & TAGS (For PXL-500/510, PXL-250 and IP-2000)
KC-10X
Standard Light Proximity Card
MT-10XP
Multi-Tech Card (without Mag Stripe)
MT-10XM
Multi-Tech Card (with Mag Stripe)
PKT-10X
Proximity Key Tag
KC-26X
IntelliProx Light Proximity Card
MT-26XP
IntelliProx Multi Technology Proximity Card
MT-26XM
IntelliProx Multi Technology Proximity Card
PKT-26X
IntelliProx Proximity Key Tag
PVC-9
PVC Overlay
Lifetime
12
12
Lifetime
Lifetime
12
12
Lifetime
12
PYRAMID SERIES PROXIMITY READERS
P-300
Cascade Proximity Reader
P-400
Gibraltar Proximity Reader
P-500
Alps Proximity Reader
P-640
Patagonia Piezo Keypad/Prox Reader
P-700
Yukon Proximity Reader
DELTA3
Multi-Technology Smartcard Reader/Mullion Mount
DELTA5
Multi-Technology Smartcard Reader/Switch Plate
DELTA6.4
Multi-Technology Smartcard Reader/Keypad
Lifetime
Lifetime
Lifetime
Lifetime
Lifetime
Lifetime
Lifetime
Lifetime
PYRAMID SERIES CARDS & TAGS (For PXL-500W and PXL-250W)
PSC-1
Standard Light Proximity Card
PSI-4
Image Technology Proximity Card
PSM-2P
Multi Technology Proximity Card
PSM-2S
Multi Technology Proximity Card
PSK-3
Proximity Key Ring Tag
SMC-1
Mifare ISO 1K Smartcard
SMC-4
Mifare ISO 4K Smartcard
Lifetime
Lifetime
12
12
Lifetime
12
12
PHOTO BADGING PRINTERS
Printer, Magicard Pronto NR
24
N/A
N/A
36
N/A
N/A
24
N/A
N/A
36
Pronto Printer Ribbon, Color NR
Pronto Printer Cleaning Kit NR
Printer, Magicard RIO2 NR
RIO2 Printer Ribbon Color NR
RIO2 Printer Cleaning Kit NR
Printer, Magicard Enduro NR
Enduro Printer Ribbon, Color NR
Enduro Printer Cleaning Kit NR
Printer, Magicard Tango2 NR
ENTRAGUARD TELEPHONE ENTRY SYSTEMS
EGT-250
Entraguard Titanium, Standard Keypad (hands free,250 unit capacity)
ESP-750
Entraguard Silver, Standard Keypad (hands free, 750 unit capacity)
EGP-5000HF
Entraguard Platinum, Standard Keypad (hands free, 5000 unit capacity)
EGS-WUPW
Entraguard Walk-Up Package Wiegand Format
EGS-WUPP
Entraguard Walk-Up Package MS Format
ACCESSORIES
EGT-PL
EGP-PL
EGH-12
EPS-58
RMK-65
FMK-95
GNA-65
HSE-95
Titanium Postal Lock
Platinum/Silver Postal Lock
Heater Kit for Entraguard Units
Power Supply and Battery,
Recess Mount Kit for Titanium
Flush Mount Kit for Entraguard Platinum
Pedestal Mount Adaptor for Titanium
Hooded Enclosure for Entraguard Platinum
Defective Only
Defective Only
Defective Only
24
24
24
By Content
By Content
12
12
12
12
24
24
24
24
NO PHONE LINE (NPL) TELEPHONE ENTRY SYSTEMS
NPL11-MC
Master Controller
NPLII-RC
Relay Card
NPLII-EC
Expdander Cabinet
NPLII-TB
RJ71C Telephone Blocks
NPLII-CA
Relay Card Cable
12
12
12
12
12
ELEVATOR CONTROL
LC-502P
2 Floor Elevator Controller
LC-508P
8 Floor Elevator Controller
LC-502W
2 Floor Elevator Controller
LC-508W
8 Floor Elevator Controller
WAK-8
Wiegand Amplifier for LC-202W/502W
24
24
24
24
24
NR= NON REFUNDABLE
Defective Only
3
December 2009
Warranty
(in months)
OTHER READER TECHNOLOGIES
SX-34
Essex Keypad Reader 3 x 4
BC-60
Bar Code Reader
24
12
TRANSMITTER CARD SYSTEM
MS-1400
Keri Key, 2 Channel Receiver MS Output
TM-10
Keri Key, 1 Button Transmitter
TM-10MS
Keri Key, 1 Button Transmitter w/MS Insert
TM-10FW
Keri Key, 1 Button Transmitter w/Farpointe Insert
TM-40
Keri Key , 4 Button Transmitter
TM-40MS
Keri Key , 4 Button Transmitter w/MS Insert
TM-40FW
Keri Key, 4 Button Transmitter w/Farpointe Insert
12
12
12
12
12
12
12
WRR-42
WRT-1
WRT-4
12
12
12
Ranger, Receiver
Ranger, 1 Button Mini Transmitter
Ranger, 4 Button Transmitter
LONG RANGE VEHICLE TAG SYSTEM
VT-10P
V-Track Package Keri Format
VT-10W
V-Track Package Wiegand Format
EX-10P
V-Track Exciter/Antenna for exit lane egress
LRT-10K
Vehicle Tags Keri Format
LRT-10W
Vehicle Tags Wiegand Format
12
12
12
12
12
PERIPHERALS and ACCESSORIES
EXM-56C
Modem - External 56K Baud
KDP-552
Cable, PXL-500/IP-2000 to PC or modem
KPS-4
Power Supply
KPS-5
Power Supply
KPS-7
Power Supply
KPS-8
Battery
KPS-11
Power Supply
IRP-1
Isolation Kit
LCD-1
Alpha/Numeric Plug-In Display
12
12
12
12
12
12
12
12
12
DEMONSTRATION EQUIPMENT
DC-550
PXL-500 Demo Suitcase
DC-NXT1
NetXtreme Demo Suitcase
12
12
BADGING ACCESSORIES
Lanyard NR
Retractor (Yo-Yo) NR
Clip NR
Pouch - Vertical NR
Pouch - Horizontal NR
N/A
N/A
N/A
N/A
N/A
NR= NON REFUNDABLE
4
December 2009
Keri Systems, Inc. Product Warranty
Reference Document
Contact Keri Systems
Keri USA
Keri UK, Ireland, Europe
2305 Bering Drive
San Jose, CA 95131
Unit 17
Park Farm Industrial Estate
Ermine Street
Buntingford
Herts SG9 9AZ UK
Telephone: (800) 260-5265
(408) 435-8400
Telephone: + 44 (0) 870 444 7234
Fax: (408) 435-7163
Fax:+ 44 (0) 1763 274 106
Web: www.kerisys.com
Web:www.kerisystems.co.uk
E-mail: sales@kerisys.com
techsupport@kerisys.com
E-mail:sales@kerisystems.co.uk
tech-support@kerisystems.co.uk
End of document.
Page 5 of 5
P/N: 01847-001 Rev. L
KSP
33 HERMON STREET
WORCESTER, MA 01610
PH: 800-577-5397 Fax: 508-753-2183
To Whom It May Concern,
This letter is to certify that any product manufactured by KSP is warranted for up
to 3 years after receipt of purchase.
Regards,
Karen Zawalich
V.P. Sales & Marketing
WARRANTY
LCN warrants its products manufactured after January 1, 1989 to be free from defects in materials and workmanship for a period
of ten (10) years from the date of manufacturer for the 4000 Series and the 1000 Series products and for two (2) years from
the date of manufacturer for all other products specifically listed in the table below (see Table below for products and
warranty periods).
Products
Years
4000 Series Closers
10 Years
1000 Series Closers, Concealed Closers, High Security Closers (less DPS)
10 Years
Power Operators, Sentronics, SEM Magnets, 2210 DPS, Safety Guards
2 Years
This limited warranty does not cover products that (i) are not the proper size for the application; (ii) are not installed in
accordance with LCN’s published installation instructions; (iii) are installed with improper or incorrect parts [Note: It is
recommended that the products be installed with the LCN fasteners provided with the product.]; (iv) have been, in the opinion
of LCN, modified, repaired, or altered in any way without the express written consent of LCN; (v) are used for purposes which they
are not designed or intended; or (vi) are subjected to misuse, abuse, negligence, or accident. The following costs and expenses are
not covered by the provisions of this limited warranty: (i) labor costs for the removal and reinstallation of products; (ii) shipping
and freight expenses required to return products to LCN; (iii) normal maintenance; and (iv) economic losses.
LCN will replace the products which, in the opinion of LCN, are found to be defective, provided said products are returned to LCN,
Warranty and Replacement Department, 121 West Railroad Avenue, P.O. Box 100, Princeton, Illinois USA 61356-0100.
LCN SHALL IN NO EVENT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES FOR
ANY CLAIM WHETHER BASED ON CONTRACT, WARRANTY, TORT (INCLUDING, BUT NOT LIMITED TO, STRICT LIABILITY OR
NEGLIGENCE), PATENT INFRINGEMENT, OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
This limited warranty is in place of all other warranties, expressed or implied, and excludes any warranties of fitness for a
particular purpose or merchantability. No agent, representative, dealer, or employee of LCN has the authority to increase or alter
the obligations of this limited warranty.
Note: 900/7900 Series compressors are not manufactured by LCN and are excluded from the coverage of the LCN limited
warranty. LCN reserves the right to supply alternative compressors. For more information, parts, or repairs concerning the
compressors, contact the compressor manufacturer directly.
Ingersoll-Rand Company
P.O. Box 100
Princeton, IL 61356-0100
www.lcnclosers.com
Product Liability: General Liability is $1 million each occurrence. $2 million general
aggregate.
Product Warranty: product warranty is against manufacturing defects in workmanship or
materials. The warranty is void if product has been abused beyond normal wear and tear or
used for purposes other than intended.
Warranty Disclaimer: Except as expressly set forth in the Lucky Line Products, Inc. warranty,
Lucky Line Products, Inc. makes no warranty with respect to this product whatsoever and
specifically disclaims all other warranties, whether express or implied, including, without
limitation, all warranties regarding the product’s fitness for a particular purpose and
warranties regarding the product’s merchantability.
Return Policy: All claims for shortages, damaged/defective goods, or pricing discrepancies
must be reported within 30 days from invoice date. Custom sales are final. Credit for goods
returned in re-saleable condition will be allowed only upon our written permission with an RGA
number. All returns are subject to a 15% restocking fee.
Limited Warranty
Yale Security Inc. (the "Company") warrants that its products sold under the Norton® trade name in the United States of America are free from
defects in workmanship and materials under normal use and service.
This warranty does not cover defects or damage arising from improper installation, lack of or improper maintenance, improper storage, shipping
and handling, ordinary wear and tear, misuse, abuse, accident, unauthorized service, use with unauthorized non-Norton products or parts, or
the effects of erosion, or corrosion on the finish. This warranty is void if any modification is made to the product, regardless of whether the
modification causes or contributes to the alleged defect. All modifications are made at the risk of the party making modification.
The only liability of the Company in tort or contract whether under this warranty or otherwise shall be limited to the repair or replacement of any product or component part which
shall prove defective as covered by this warranty. This warranty does not cover, and the Company is not responsible for, any labor charges or others costs and expenses associated with
removal and reinstallation of products, or maintenance or other adjustments to the products. The warranty period after delivery to the original purchaser in all cases is as follows:
Norton® Door Controls:
7100SZ SafeZone®. ............................................................................................................................................................................................................... 2 years
7200 Electromechanical...................................................................................................................................................................................................... 2 years
7700 PowerTrack®................................................................................................................................................................................................................. 2 years
6900 PowerMatic®................................................................................................................................................................................................................. 2 years
5700 LEO®................................................................................................................................................................................................................................. 2 years
5900 X-in®................................................................................................................................................................................................................................ 2 years
1700 series............................................................................................................................................................................................................................... 5 years
9300BC series.......................................................................................................................................................................................................................... 5 years
78-B/F series...........................................................................................................................................................................................................................10 years
1600 series.............................................................................................................................................................................................................................10 years
2800ST cam closer...............................................................................................................................................................................................................10 years
7500/7700 series..................................................................................................................................................................................................................10 years
7900 overhead concealed.................................................................................................................................................................................................10 years
8000 series.............................................................................................................................................................................................................................10 years
9000 Trinity®. ........................................................................................................................................................................................................................10 years
Aluminum shells of all NORTON door controls (in the building in which originally installed)...................................................Life of Building
The Company will not pay for the cost of repair performed other than in accordance with this warranty.
Written notice of a product or component part believed to be defective as covered by this warranty should be sent to Yale Security Inc., 1902 Airport Road, Monroe, North Carolina
28110, and should include your name and address, an identification of the product or component part and a brief description of the defect. Upon receipt of such notice, the Company
will inform you where to ship such product or component part, shipping charges prepaid, for examination and, in the event such examination reveals a defect covered by this warranty,
the product will be repaired or replaced.
This warranty is in lieu of all other express warranties. To the extent permitted by law, all implied warranties are limited to the duration of this warranty. Yale Security Inc. shall not be
liable for any incidental or consequential damages.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so
the above limitations or exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
For more specific warranty information, please contact us at:
Norton Door Controls • 1902 Airport Road • Monroe, NC 28110 USA • Tel: 800-438-1951, Fax: 800-338-0965 • www.nortondoorcontrols.com
43002-5/11R
4/24/12
Olympus Lock Warranty
Horne
Proaucts
News
Documents
Instruct
ons
11 ages
V de
Projects
Contact
Connect with us on:
Olympus Warranty
Olympus
Lock warrants
and materials
not
cover
maintenance,
returned
arising
are free from defects
use and service.
from improper
wear and tear, misuse
of the company
installation,
in tort or in contract,
whether
Interchangeable
core:
Best SAC, Schlage FUll-size IC,
MedecoNale IC, CorbinlRusswin
IC, Sarge nt IC
Schlage "C" keyway
Commercial keyways, less
cylinder locks to accept third party
Schlage key-in-knob com patible
cylinders
Small pin National keyway
Small pin CCL keyway
Padlock able cam lock
Accessories
Padlocks
improper
Under no circumstances
or consequential
which are
purchase.
and is in lieu of all other representations
Lock be made liable for any incidental
does
under this warranty
of products
one year of the date of original
or implied warranties.
Product Groups:
in workmanship
This warranty
or abuse.
shall be limited to repair or replacement
prepaid to us within
This is a limited warranty
expressed
installation,
or damages
ordinary
The only liability
or otherwise
that its products
under normal
defects
Ilt
and
shall Olympus
damages
or losses.
Our customer service
representatives
are available to
assist you Monday thrugh Friday 7:00
am to 4:00 pm (Pacific Tim e).
Olympus is your single source for
cabinet lock solutions. Contact us
today to see which products might
be right for your next project.
Contact Us>
©Copyright 2012 Olympus Lock, Inc. All Rights Reserved
For website questions contact Webmaster
For more information
please Contact Us
olympus-Iock.com/warranty.htm
Allwebco
Design
& Web Hosting
I WJ':.' 1:00+'·111
© Copyright Site Design 2010
1/1
WARRANTY
PDQ MANUFACTURING LIMITED WARRANTY
GRADE 1 LOCK PRODUCT
MR Series Mortise Locks
Lifetime Warranty
XGT Spirit Series
Lifetime Warranty
GT Spirit Series
25-Year Warranty
SX Series
5-Year Warranty
GRADE 2 LOCK PRODUCT
GP Series
8-Year Warranty
SA Series
5-Year Warranty
SD Series
5-Year Warranty
SV Series
1-Year Warranty
SW Series
1-Year Warranty
SE Series
1-Year Warranty
CL Series
2-Year Warranty
K Series
1-Year Warranty
GRADE 3 LOCK PRODUCT
SR Series
1-Year Warranty
J SERIES DECORATIVE TUBULAR
J Series
5-Year Warranty
CLOSERS
3100 Series
25-Year Warranty
5100 Series
25-Year Warranty
5300 Series
25-Year Warranty
5500 Series
25-Year Warranty
7100 Series
25-Year Warranty
EXIT DEVICES
4200 Series
5-Year Warranty
6200 Series
10-Year Warranty/1-Year Electric Components
MULLIONS
Mullions
• PDQ warrants that its products sold under the PDQ
and American Eagle trade name in the United States
of America are free from defects in workmanship and
materials under normal use and service.
• This warranty does not cover defects or damage
arising from improper installation, lack of or improper
maintenance, improper storage, shipping and handling,
corrosion, erosion, ordinary wear and tear, misuse,
abuse, accident, unauthorized service, or use with
unauthorized non-PDQ or American Eagle products
or parts.
• This warranty is void if any modification is made to
the warranty product, regardless of whether the
modification causes or contributes to the alleged
defect. All modifications are made at the risk of the
party making the modification.
• The only liability of PDQ and or American Eagle, in tort
or contract whether under this warranty or otherwise,
shall be limited to the repair or replacement of any
product or component part which shall prove defective
as covered by this warranty, within the stated time period
listed below, after delivery to the original purchaser.
• This Limited Warranty does not apply
to ANSI A156.2 Grade 2 Key-In-Lever
product installed on Educational Facilities.
CYLINDERS, FACTORY OR FIELD COMBINATED
Cylinders shall be periodically lubricated depending on
environmental conditions. Dry graphite, molybdenum
disulfide or Polylube(trademark) are recommended.
Petroleum based liquid lubricants should only be used
in cylinders in harsh or corrosive environments and
should not be mixed with dry lubricants.
• PDQ and or American Eagle will not pay for the
cost of repair performed other than in accordance
with this warranty.
• Refer to our Returned Goods Policy regarding the
return of a product or component part believed to
be defective as covered by this warranty. A brief
description of the defect will be required. Product
will be examined upon return. In the event such
examination reveals a defect covered by this warranty,
the product will be repaired or replaced. If the product
is deemed not to be "in warranty", it will be returned
at customer's expense.
1-Year Warranty
THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS
WARRANTIES. TO THE EXTENT PERMITTED BY LAW,
ALL IMPLIED WARRANTIES ARE LIMITED TO THE DURATION
Commercial Hinges
5-Year Warranty
OF THIS WARRANTY. PDQ MANUFACTURING and AMERICAN
EAGLE LOCK COMPANY SHALL NOT BE LIABLE FOR ANY
INCIDENTAL OR CONSEQUENTIAL DAMAGES. NO AGENT, SALES REPRESENTATIVE OR DEALER HAS THE AUTHORITY TO INCREASE OR ALTER THE OBLIGATIONS OF THIS WARRANTY.
HINGES
SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS
OR EXCLUSIONS MAY NOT APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
3
LT1007-2-12
WARRANTY
1. STANLEY SECURITY SOLUTIONS, INC. mechanical products are warranted against defects in material and workmanship
for a period of FIVE (5) YEARS for Apex 2000 series THREE (3) YEARS for Reliant 5000 and Olympian series from the date
of invoice.
2. STANLEY SECURITY SOLUTIONS, INC. electrical products are warranted against defects in material and workmanship for
a period of ONE (1) YEAR from the date of invoice. The D-4990 product is warranted against defects in material and
workmanship for a period of TWO (2) YEARS from the date of invoice.
3. This warranty does not cover defects or damage arising from failure to perform normal maintenance, faulty installation,
ordinary wear and tear, misuse, abuse, freight damage, application for which the product was not designed, or incorrect or
improper wiring of electrical products.
4. Claims under this warranty must be made in writing to STANLEY. At its option, STANLEY will repair the defect, replace the
product, or issue credit at the net value originally invoiced. STANLEY liability shall in no event exceed the net cost of the product.
REPAIR, REPLACEMENT OR CREDIT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE
CONSUMER. STANLEY SECURITY SOLUTIONS, INC. SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL
DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT
PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. WE ARE NOT
RESPONSIBLE FOR ANY CHARGES FOR LABOR OR MATERIALS INCURRED BY OTHERS WITHOUT OUR PRIOR
WRITTEN CONSENT.
Some states do not allow the exclusion or limitation of incidental or consequential damages, or allow limitations on how long an
implied warranty lasts, so the above limitations or exclusion may not apply to you. This warranty gives you specific legal rights,
and you may also have other rights which vary from state to state.
P.O. Box 50444 · Indianapolis, Indiana · 46250
(317) 849-2250 · FAX (317) 806-4572
Your PRO-LOK® BLUE PUNCH MANUFACTURER’S WARRANTY
SERIAL# BP
TYPE
PRO-LOK® hereby warranties that for a period of 90 days from the date of the original
purchase, it will repair or replace (at PRO-LOK®’s discretion) any part of the enclosed key
machine which proves defective in the original materials or workmanship, without charge,
subject to the following conditions:
1. Registration: The warranty registration must be filled out online at the web address
above and must be submitted to PRO-LOK® within 30 days of the date of original
purchase.
2. Unauthorized Repair: This key machine must not have been previously altered,
repaired or serviced by anyone other than PRO-LOK ®. For authorized factory
service, call PRO-LOK®.
3. Wear & Tear: Excessive wear and tear or misuse of any part of this key machine will
invalidate this warranty.
NOTE: Warranty does not cover shipping charges.
No other warranty (written or verbal) other than the foregoing is authorized or accepted by PRO-LOK®.
All returns must be authorized in advance by PRO-LOK®
Call (714) 633-0681 for a Blue Punch Return Number (BPR#). Be prepared to provide the Serial Number
and type of machine you are returning.
The information contained in this document is subject to change without notice.
Home/TOC Gen Info
Cyl & Keys
Bored Locks
Mortise Locks
Multi-Point
Closers/H&S
Exits
Aux Locks Specialty Hdw. Electrical
GI-6
GENERAL INFORMATION
LIMITED WARRANTY
January 1, 2011 | Minimum Order $250
ASSA ABLOY reserves the right to review Approved Reseller’s usage of ASSA ABLOY at any time and may:
(a) require changes to the use of ASSA ABLOY Marks at any time in its sole discretion, which changes must be
implemented within 30 days of written notice to Approved Reseller;
(b) condition the use of ASSA ABLOY Marks on ASSA ABLOY’s prior approval use, which approval may be
withheld in its sole discretion;
(c) revoke permission to use ASSA ABLOY Marks at any time for any or no reason days prior written notice to
Approved Reseller; and
(d) revoke permission to use ASSA ABLOY Marks immediately upon notice to Reseller in the event Approved
Reseller is in violation of this Policy, or of any agreement with ASSA ABLOY or any Group Company.
Approved Reseller’s right to use ASSA ABLOY Marks in no way conveys to Approved any proprietary or economic
interest in any ASSA ABLOY Marks.
Use of ASSA ABLOY Marks in violation of this Policy may result in severe civil and liabilities. ASSA ABLOY will
vigorously enforce this Policy by seeking all appropriate remedies, including, but not limited to, pecuniary damages
and injunctive relief.
LIMITED WARRANTY:
SARGENT ® warrants that its products sold under the “SARGENT” trade name in the United States of America are
free from defects in workmanship and materials under normal use and service.
This warranty does not cover defects or damage arising from improper installation, lack of or improper maintenance,
improper storage, shipping and handling, corrosion, erosion, ordinary wear and tear, misuse, abuse, accident,
unauthorized service, or use with unauthorized non-SARGENT products or parts.
This warranty is void if any modification is made to the warranty product, regardless of whether the modification causes
or contributes to the alleged defect. All modifications are made at the risk of the party making the modification.
The only liability of SARGENT ®, in tort or contract whether under this warranty or otherwise, shall be limited to the
repair or replacement of any product or component part which shall prove defective as covered by this warranty,
within the stated time period listed below, after delivery to the original purchaser.
• T-Zone (11-Line), Bored-In Lever Lock
• 1130, 1331, 1431, 268, 269, 278, 281, 421, 351 Series Closer Body
• 9200/8200/7800, Mortise Lock
• FM7100 10L, Bored-In Lever Lock
• 7000/7900 Series Vertical Rod Lock
• 80/90 Series Exit Device or Trim
• Overhead Holders & Stops
• 7L, Bored-In Lever Lock
• 8 Line, Bored-In Knob Lock
• 20/30 and P800 Series Exit Device or Trim
• All Electromechanical and Electronic Products
(56- Electric Latch Retraction Option – 5 years)
• All other SARGENT products
10 years
10 years
10 years
7 years
5 years
5 years
5 years
5 years
3 years
3 years
2 years
1 year
Copyright © 2011 SARGENT Manufacturing. All rights reserved. Reproduction in whole or in part without the express written
permission of SARGENT Manufacturing is prohibited. Contact us at: 800-727-5477 or visit www.sargentlock.com
Profile ACP
WARRANTY
Seller warrants that for one year* from the date of shipment from Seller’s point of manufacture, the
goods shall be free from defects in material and workmanship, provided the goods are normally and
properly used according to the Seller’s written instructions.
THIS WARRANTY IS EXPRESSLY MADE IN LIEU OF ANY AND ALL OTHER WARRANTIES, EXPRESSED
OR IMPLIED. S&G DOES NOT WARRANT THAT THE GOODS ARE MERCHANTABLE OR FIT FOR ANY
PARTICULAR PURPOSE EXCEPT AS EXPRESSLY PROVIDED HEREIN.
Seller’s entire liability and Buyer’s exclusive remedy in the event that the goods do not conform to the
foregoing warranty shall be Seller’s repair or replacement of the goods (including payment of freight
costs to and from point of manufacture).
UNAUTHORIZED USE OF COMPONENTS NOT MANUFACTURED BY THE SELLER IN CONJUNCTION
WITH SELLER’S PRODUCTS INVALIDATES THE WARRANTY. ANY MODIFICATIONS TO PRODUCTS
NOT PERFORMED BY S&G INVALIDATE THE WARRANTY. SELLER SHALL HAVE NO LIABILITY FOR
ANY CONSEQUENTIAL, INCIDENTAL, INDIRECT OR SPECIAL DAMAGES. SELLER DOES NOT
WARRANT ITS LOCK PRODUCTS TO BE IMPERVIOUS TO FORCIBLE OR SURREPTITIOUS ENTRY,
AND SELLER SHALL HAVE NO LIABILITY FOR DAMAGE TO OR LOSS OF PROPERTY SOUGHT TO BE
PROTECTED BY ANY SUCH LOCK.
*6100 series electronic locks, 6300 series electronic locks, 2002/2003/2004/2005 series electronic locks,
6730 series mechanical combination locks, and Environmental Padlocks carry a two year warranty.
Arm-A-Dor® devices carry a five year warranty on mechanical components and a one year warranty on
alarm components.
www.sargentandgreenleaf.com
www.stanleysecuritysolutions.com
Corporate Headquarters: One Security Drive • Nicholasville, Kentucky 40356 • USA • Tel. 859-885-9411, Fax 859-887-2057
European Headquarters: 9, chemin du Croset • 1024 Ecublens• Switzerland • Tel. 41 21 694 34 00, Fax 41 21 694 34 09
Revision Date: June 26, 2009
P509-818
PATENT NOTICE
Schlage® products and those of its subsidiary companies and
licensees may be covered by both issued and pending U.S. and
foreign patents, copyrights and trademarks. Manufactured items are
covered by one or more of the following patents:
4884835
5070715
5152558
5308131
5533368
5566996
5604970
5628216
5657653
5683127
5697653
5715717
5718468
5722276
5769472
5782118
5809816
5881590
5947537
6038896
6042417
6131966
6189351
6516644
6553800
6568725
6612141
6615629
6619705
6869116
6905773
6988751
7036856
7051562
7063363
7159424
7248836
D372417
D372854
D397993
D400348
D411732
D426452
D428324
D493089
LIMITED WARRANTY: COMMERCIAL APPLICATIONS
3-Year Limited Warranty
Schlage Lock Company (the “Company”) extends a three-year
limited warranty from the original date of purchase to the Original
User of the products manufactured by the Company (the “Product”)
against defects in material and workmanship. Certain Products
contain restrictions to this limited warranty, additional warranties or
different warranty periods. Please see below for specific Product
warranty information.
The provisions of this warranty do not apply to Products: (i)
used for purposes for which they are not designed or intended; (ii)
which have been subjected to alteration, abuse, misuse, negligence
or accident; (iii) which have been improperly stored, installed,
maintained or operated; (iv) which have been used in violation of
written instructions provided by Schlage; (v) which have been
subjected to improper temperature, humidity or other environmental
conditions (i.e., corrosion); or (vi) which, based on Schlage’s
examination, do not disclose to Schlage’s satisfaction
non-conformance to the warranty. Additionally, Schlage will not
warrant ANSI A156.2 Grade 2 lever Product installed in educational
facilities and student housing.
SPECIFIC PRODUCT WARRANTY RESTRICTIONS / ADDITIONAL WARRANTIES
Portable Security Products Warranty: A limited lifetime warranty
is provided to the Original User, subject to the restrictions of this
limited warranty, except that the Company’s sole obligation under
this warranty is to replace the Product.
ND-Series Levers 7-Year Mechanical Warranty: A limited warranty
is provided to the Original User for seven (7) years from original date
of purchase, subject to the restrictions of this limited warranty.
Small Format Interchangeable Core (SFIC) Warranty: This
limited warranty also applies to Schlage locks and housings when
used with another manufacturer’s cores, or to Schlage cores (i.e.
SFIC) when used in another manufacturer’s locks and housings.
The use of unauthorized cylinder cams or other components with
the Products shall void this warranty.
Everest® Primus® Limited Lifetime Key Breakage Warranty: A
limited lifetime warranty is provided to the Original User against key
breakage, subject to the restrictions of this limited warranty.
Cobra, CM and PRO-Series 1-Year Electronic Lock Warranty: A
limited warranty is provided to the Original User for one (1) year
from original date of purchase, subject to the restrictions of this
limited warranty.
2007 Schlage Lock Co.
©
P509-818 Rev. 10/07-f
Printed in Country
ETIQUETA DE NOTIFICACIÓN SOBRE PATENTES
Los productos Schlage® y los de sus compañías afiliadas y
concesionarias pueden estar cubiertos por patentes, derechos de
copyright y marcas comerciales, emitidos y pendientes, tanto en
Estados Unidos como en otros países. Los productos manufacturados
están cubiertos por una o más de las siguientes patentes:
4884835
5070715
5152558
5308131
5533368
5566996
5604970
5628216
5657653
5683127
5697653
5715717
5718468
5722276
5769472
5782118
5809816
5881590
5947537
6038896
6042417
6131966
6189351
6516644
6553800
6568725
6612141
6615629
6619705
6869116
6905773
6988751
7036856
7051562
7063363
7159424
7248836
D372417
D372854
D397993
D400348
D411732
D426452
D428324
D493089
ÉTIQUETTE DE L’AVIS DE BREVET
Les produits Schlage® et ceux de ses filiales et de ses fabricants
sous licence peuvent être couverts par des marques de commerce,
des copyrights et des brevets américains et étrangers émis ou en
instance. Les produits fabriqués sont couverts par un ou plusieurs
des brevets suivants:
4884835
5070715
5152558
5308131
5533368
5566996
5604970
5628216
5657653
5683127
5697653
5715717
5718468
5722276
5769472
5782118
5809816
5881590
5947537
6038896
6042417
6131966
6189351
6516644
6553800
6568725
6612141
6615629
6619705
6869116
6905773
6988751
7036856
7051562
7063363
7159424
7248836
D372417
D372854
D397993
D400348
D411732
D426452
D428324
D493089
GARANTÍA LIMITADA: APLICACIONES COMMERCIALES
Garantía Limitada de 3 años
La empresa de cerraduras Schlage (en adelante, la “Empresa”)
expide una garantía limitada de tres años desde la fecha de compra
original al usuario original de los productos fabricados por la
Empresa (en adelante, los “Productos”) contra defectos en el
material o en la mano de obra. Ciertos Productos tienen
restricciones a esta garantía limitada, garantías adicionales o
diferentes períodos de garantía. Consulte la información específica
de la garantía del producto que sigue.
Las disposiciones de la presente garantía no abarcan los
Productos: (i) utilizados para fines ajenos a lo diseñado o previsto;
(ii) sometidos a alteración, maltrato, uso incorrecto, negligencia o
accidente; (iii) almacenados, instalados, mantenidos o utilizados
inadecuadamente; (iv) utilizados en contravención de las
instrucciones escritas proporcionadas por Schlage; (v) sometidos a
temperatura, humedad u otras condiciones ambientales inadecuadas (por ejemplo, corrosión); (vi) que, a juicio de Schlage, no revelen
el incumplimiento a la garantía. Además, Schlage no garantizará el
Producto de manija ANSI A156.2 de Grado 2, que se haya instalado
en establecimientos educativos o en residencias estudiantiles.
GARANTIE LIMITÉE: APPLICATIONS COMMERCIALES
Garantie Limitée de 3 ans
Schlage Lock Company (la «Compagnie») accorde à l’utilisateur initial
une durée supplémentaire de trois ans de garantie limitée sur les
produits fabriqués par ladite Société (les «Produits») contre tout défaut
matériel et de fabrication à compter de la date initiale d’achat. Certains
Produits disposent de restrictions sur cette garantie limitée, des
garanties supplémentaires ou différentes périodes de garantie. Voir
ci-dessous les informations sur les garanties de Produits spécifiques.
Les conditions de cette garantie ne s’appliquent pas aux
Produits: (i) utilisés à des fins pour lesquelles ils n'ont été ni
conçus ni prévus; (ii) soumis à modification, abus, mésusage ou
accident; (iii) entreposés, installés, entretenus ou utilisés de
manière incorrecte; (iv) utilisés en violation des instructions écrites
de Schlage; (v) soumis à des températures, degrés d'humidité et
autres conditions d'environnement inappropriées; (vi) ou qui, sur la
base d'un examen par Schlage, ne satisfont pas aux conditions de
non-conformité de cette garantie. En outre, la garantie à vie limitée
NE COUVRE PAS le Produit à levier conforme à la norme ANSI
A156.2 de Grade 2, installé dans des établissements
d’enseignement et au domicile des étudiants.
RESTRICCIONES ESPECÍFICAS DE LA GARANTÍA DEL PRODUCTO/GARANTÍAS ADICIONALES
RESTRICTIONS SPÉCIFIQUES DE GARANTIE DE PRODUIT/GARANTIES ADDITIONNELLES
Garantía de los productos de Portable Security: Se proporciona
una garantía limitada de por vida al Usuario Original; conforme a las
restricciones de esta garantía limitada, pero que la obligación única
de la compañía bajo esta garantía es substituir el producto.
Garantía mecánica de 7 años para las manijas de la serie ND: Se
proporciona una garantía limitada de siete años desde la fecha
original de compra al Usuario Original, conforme a las restricciones
de esta garantía limitada.
Garantía para los núcleos intercambiables de formato pequeño
(SFIC): Esta garantía limitada se aplica para las cerraduras y
alojamientos Schlage, incluso cuando se unen con cilindros de otros
fabricantes, o cuando éstos se unen con cerraduras y alojamientos
de otros fabricantes. El uso de levas de cilindro u otros componentes
no autorizados con los Productos de Schlage anulará esta garantía.
Garantía limitada de por vida para la rotura de las llaves
Everest® Primus®: Se proporciona una garantía limitada de por vida
al Usuario Original contra rotura de llaves; esta garantía queda
sujeta a las mismas restricciones que la garantía limitada.
Garantía de 1 año de cerradura electrónica de las series Cobra,
CM y PRO: Se proporciona una garantía limitada de un año desde la
fecha original de compra al Usuario Original, conforme a las
restricciones de esta garantía limitada.
Garantie des produits de sécurité portable: Une garantie à vie
limitée est attribuée à l’Utilisateur Original et soumise aux
restrictions de cette garantie limitée.
Garantie mécanique de 7 ans pour les leviers de la série ND:
Une garantie de sept (7) ans est attribuée à l’Utilisateur Original et
soumise aux restrictions de cette garantie limitée.
Garantie pour le barillet interchangeable de petit format (SFIC):
Cette garantie limitée s’applique aux verrous et logements de
Schlage lorsqu’ils sont utilisés avec des cylindres d’autres fabricants
et aux barillets (SFIC) Schlage lorsqu’ils sont utilisés avec des
logements et des verrous d’autres fabricants. L’utilisation de cames
de cylindres ou d’autres composants non autorisés avec les Produits
Schlage annule cette garantie.
Garantie à vie limitée contre la rupture des clefs Everest®
Primus®: Une garantie à vie limitée est attribuée à l'Utilisateur
Original contre la rupture des clefs, sujet aux restrictions de cette
garantie limitée.
Garantie de 1 an sur les verrous électroniques Cobra, CM et
PRO: Une garantie à vie limitée est attribuée à l’Utilisateur Original et
soumise aux restrictions de cette garantie limitée.
LIMITED WARRANTY: RESIDENTIAL APPLICATIONS
Limited Lifetime Mechanical and Finish Warranty
Subject to the terms and conditions of this warranty, the Company
extends a limited lifetime mechanical and finish warranty to the
Original User of the Product against defects in material and
workmanship as long as the Original User occupies the residential
premises upon which the Product was originally installed.
The provisions of this warranty do not apply to Products: (i) used
in commercial applications; (ii) used in common area applications; (iii)
used for purposes for which they are not designed or intended; (iv)
which have been subjected to alteration, abuse, misuse, negligence or
accident; (v) which have been improperly stored, installed, maintained
or operated; (vi) which have been used in violation of written
instructions provided by Schlage; (vii) which have been subjected to
improper temperature, humidity or other environmental conditions; or
(viii) which, based on Schlage’s examination, do not disclose to
Schlage’s satisfaction non-conformance to the warranty. Additionally,
this warranty DOES NOT COVER scratches, abrasions, or
deterioration due to the use of paints, solvents or other chemicals.
Exclusions: Oil Rubbed Bronze finish (613) is designed to improve
over time and change in appearance, creating a living finish through
daily use and thus, finish discoloration is not applicable to the above
warranty.
ADDITIONAL TERMS & CONDITIONS APPLYING TO BOTH COMMERCIAL
& RESIDENTIAL APPLICATIONS OF COMMERCIAL PRODUCTS
What the Company Will Do: Upon return of the defective Product to the
Company, the Company’s sole obligation, at its option, is to either repair
or replace the Product, or refund the original purchase price in exchange
for the Product.
Original User: This warranty only applies to the Original User of
Products. This warranty is not transferable.
What is Not Covered: The following costs, expenses and damages are
not covered by the provisions of this limited warranty: (i) labor costs
including, but not limited to, such costs as the removal and reinstallation
of Products; (ii) shipping and freight expenses required to return
Products to Schlage; and (iii) any other incidental, consequential,
indirect, special and/or punitive damages, whether based on contract,
warranty, tort (including, but not limited to, strict liability or negligence),
patent infringement, or otherwise, even if advised of the possibility of
such damages. Some local laws do not allow the exclusion or limitation of
incidental or consequential damages, so the above exclusion or limitation
may not apply to you.
How Local Law Applies: This warranty gives you specific legal rights,
and you may also have other rights as otherwise permitted by law. If this
Product is considered a consumer product, please be advised that some
local laws do not allow limitations on incidental or consequential
damages or how long an implied warranty lasts, so that the above
limitations may not fully apply. Refer to your local laws for your specific
rights under this warranty.
Warranty Claims: If you have a claim under this warranty, please
contact Schlage Customer Service (800-847-1864) for repair,
replacement or refund of the original purchase price in exchange for
the return of the Product to Schlage.
Miscellaneous: The Company does not authorize any person to create
for it any obligation or liability in connection with the Product. The
Company’s maximum liability hereunder is limited to the original
purchase price of the Product. No action arising out of any claimed
breach of this warranty by the Company may be brought by the Original
User more than one (1) year after the cause of action has arisen.
GARANTÍA LIMITADA - APLICACIONES RESIDENCIALES
GARANTIE LIMITÉE: APPLICATIONS DOMESTIQUES
Garantía Limitada de Por Vida de Mecánica y de Terminado
Sujeto a los términos y condiciones de esta garantía, la compañía concede
al Usuario Original de este Producto una garantía limitada mecánica y de
acabados de por vida contra defectos del material y la fabricación,
mientras el Usuario Original ocupe la residencia en la que el Producto fue
instalado originalmente.
Las disposiciones de la presente garantía no abarcan los Productos: (i)
utilizados en aplicaciones comerciales (ii) utilizados en aplicaciones
comunes del área; (iii) utilizados para fines ajenos a lo diseñado o previsto;
(iv) sometidos a alteración, maltrato, uso incorrecto, negligencia o accidente;
(v) almacenados, instalados, mantenidos o utilizados inadecuadamente; (vi)
utilizados en contravención de las instrucciones escritas proporcionadas por
Schlage; (vii) sometidos a temperatura, humedad u otras condiciones
ambientales inadecuadas (por ejemplo, corrosión); (viii) que, a juicio de
Schlage, no revelen el incumplimiento a la garantía. Además, esta garantía
TAMPOCO ABARCA arañazos, roces o deterioros atribuibles al uso de
pinturas, disolventes u otras sustancias químicas.
Exclusiones: El terminado en bronce lustroso (613) está diseñado para
mejorar con el tiempo y cambiar su apariencia; el terminado de ésta
adquiere una apariencia vivaz con el uso diario y así, la descoloración del
terminado no es aplicable a la garantía antedicha.
TÉRMINOS Y CONDICIONES ADICIONALES QUE SE APLICAN A LOS
USOS COMERCIALES Y RESIDENCIALES DE PRODUCTOS
COMERCIALES
Obligaciones de la compañía: Sobre la vuelta del producto defectuoso a
la compañía, la obligación única de la compañía, en su opción, está la
reparación o substituye el producto, o consolida el precio de compra
original a cambio del producto.
Usuario Original: Esta garantía sólo se extiende al Usuario Original de los
Productos. Esta garantía es intransferible.
Exclusiones en la cobertura: Los siguientes costos, gastos y daños y
perjuicios no son cubiertos por las provisiones de esta garantía limitada: (i)
costos de mano de obra que incluyen, pero no se limitan a, los ocasionados
por la extracción y reinstalación de los Productos; (ii) gastos de envío y flete
necesarios para devolver los Productos a Schlage; y (iii) otras indemnizaciones por daños y perjuicios incidentales, consecuentes, indirectos,
especiales y/o punitivos, tanto si se basan en un contrato, en una garantía,
un agravio (incluyendo pero no limitado a, negligencia o responsabilidad
estricta), violación de patente u otros, aunque se le hubiera advertido sobre
la posibilidad de dichos daños. Es posible que la limitación o exclusión
mencionadas anteriormente no sea aplicable en este caso, porque algunas
leyes locales prohíben la exclusión o limitación de las indemnizaciones por
daños y perjuicios incidentales o consecuente.
Cómo se aplica la ley local: Esta garantía reconoce derechos legales
específicos y el usuario puede tener otros según lo permitido por la ley. En
caso de que este Producto sea considerado un producto de consumidor,
tenga en cuenta que algunas leyes locales prohíben la limitación de las
indemnizaciones por daños incidentales o consecuentes, o en la duración
de una garantía implícita, de tal manera que es posible que las limitaciones
mencionadas anteriormente no se apliquen por completo. Consulte las
leyes locales para conocer los derechos específicos de esta garantía.
Demandas de la garantía: Si tienes una demanda bajo esta garantía,
por favor llame al servicio de cliente de Schlage (800-847-1864) para la
reparación, el reemplazo o el reembolso del precio de compra original a
cambio de la vuelta del producto al Schlage.
Misceláneo: La compañía no autoriza a ninguna persona a crear en su
nombre ninguna obligación o responsabilidad en relación con los Productos.
La máxima responsabilidad de Schlage, al amparo de la presente garantía, se
limita al precio original de compra del Producto. El Usuario Original no podrá
interponer demanda alguna contra Schlage por supuesta infracción de la
presente garantía después de más de (1) año de la causa de la demanda.
Garantie à Vie Limitée de Mécanique et du Fini
Sujet aux modalités et aux conditions de cette garantie, la compagnie
attribue une garantie à vie limitée de mécanique et du fini à l'Utilisateur
Original du produit contre des défauts dans le matériel et l'exécution tant
que l'Utilisateur Original occupe les lieux résidentiels sur lesquels le
produit a été à l'origine installé.
Les conditions de cette garantie ne s’appliquent pas aux Produits: (i)
utilisés dans des applications commerciales (ii) utilisé dans des
applications de secteurs communs (iii) utilisés à des fins pour lesquelles
ils n’ont été ni conçus ni prévus; (iv) soumis à modification, abus,
mésusage ou accident; (v) entreposés, installés, entretenus ou utilisés de
manière incorrecte; (vi) utilisés en violation des instructions écrites de
Schlage; (vii) soumis à des températures, degrés d’humidité et autres
conditions d’environnement inappropriées; (viii) ou qui, sur la base d’un
examen par Schlage, ne satisfont pas aux conditions de non-conformité
de cette garantie. En outre, cette garantie NE COUVRE PAS les rayures,
abrasions ou détériorations dues à l’utilisation de peintures, solvants ou
autres substances chimiques.
Exclusions: Le bronze huilé (613) est conçu pour évoluer en apparence
au fil du temps, en acquérant une patine vivante par usage quotidien; en
conséquence, la garantie susmentionnée ne s’applique pas à la
décoloration.
MODALITÉS ET CONDITIONS ADDITIONNELLES QUI S’APPLIQUENT
AUX APPLICATIONS COMMERCIALES ET RÉSIDENTIELLES DES
PRODUITS COMMERCIAL
Engagements de la compagnie: Au renvoi du Produit défectueux à
Schlage, la seule obligation de Schlage consiste, à sa discrétion, soit à
réparer, soit à remplacer le Produit ou soit à rembourser le prix d’achat
original en échange du Produit.
Utilisateur Original: Cette garantie s’applique seulement à l'Utilisateur
Original des produits et n’est pas transférable.
Ce qui n’est pas couvert: Les coûts, dépenses et dommages suivants
ne sont pas couverts par la garantie: (i) main-d'œuvre, y compris mais
sans s’y limiter, les coûts de dépose et de réinstallation des produits; (ii)
frais d’expédition et de fret requis pour renvoyer les Produits à Schlage; et
(iii) tout autre dommage accessoire, consécutif, indirect, spécial et/ou
punitif, que la réclamation soit de nature délictuelle ou contractuelle (y
compris, mais sans s’y limiter, la négligence ou la responsabilité stricte);
violations de brevets, même si l'Utilisateur avait été avisé de l’éventualité
de tels dommages. Certains lois locales ne permettent pas l’exclusion ou
la limitation des dommages accessoires ou indirects; l’exclusion ou la
limitation susmentionnée ne peut pas s’appliquer à vous.
Comment la loi locale s’applique: Cette garantie vous confère des
droits légaux spécifiques, auxquels d'autres peuvent venir s'ajouter, selon
ce que la loi permet par ailleurs. Si ce Produit est considéré comme un
bien de consommation, veuillez noter que certaines lois locales ne
permettent pas de limitations sur les dommages fortuits ou indirects ou
des durées de garantie, de sorte que certaines des limitations
susmentionnées peuvent ne pas s’appliquer entièrement. Reportez-vous
à votre législation locale pour vos droits spécifiques sous cette garantie.
Réclamations sous cette garantie: Si vous avez une réclamation sous
cette garantie, entrez svp en contact avec le service à la clientèle de
Schlage (800-847-1864) pour la réparation, le remplacement ou le
remboursement du prix d'achat original en échange du retour du produit à
Schlage.
Divers: Schlage n’autorise personne à créer en son nom une obligation
ou une responsabilité en rapport avec les Produits. La responsabilité
maximale de Schlage aux termes des présentes est limitée au prix
d'achat original du Produit. Aucune demande au titre d’une violation
alléguée de la présente garantie par Schlage ne peut être effectuée par
l’Utilisateur Original plus d’un (1) an après l'occurrence alléguée.
Lifetime Limited Mechanical & Finish Warranty and 1-Year Limited Electronics Warranty
Subject to the terms and conditions of this warranty, Schlage extends a lifetime limited mechanical and finish warranty and a one-year limited electronics warranty
to the original consumer user (“Original User”) of our Schlage brand product (“Product”) against defects in material and workmanship, as long as the Original User
occupies the residential premises upon which the Product was originally installed.
What Schlage will do: Upon return of the defective Product to Schlage, Schlage’s sole obligation, at its option, is to either repair or replace the Product, or
refund the original purchase price in exchange for the Product.
Original User: This warranty only applies to the Original User of Products. This warranty is not transferable.
What is not covered: The following costs, expenses and damages are not covered by the provisions of this limited Warranty: (i) labor costs including, but not
limited to, such costs as the removal and reinstallation of Product; (in) shipping and freight expenses required to return Product to Schlage; and (iii) any other
incidental, consequential, indirect, special and/or punitive damages, whether based on contract, warranty, tort (including, but not limited to, strict liability or
negligence), patent infringement, or otherwise, even if advised of the possibility of such damages. Some local laws do not allow the exclusion or limitation of
incidental or consequential damages, so the above exclusion or limitation may not apply to you.
The provisions of this warranty do not apply to Products: (i) used in commercial applications; (ii) used in common area applications; (iii) used for purposes
for which they are not designed or intended; (iv) which have been subjected to alteration, abuse, misuse, negligence or accident; (v) which have been improperly
stored, installed, maintained or operated; (vi) which have been used in violation of written instructions provided by Schlage; (vii) which have been subjected to
improper temperature, humidity or other environmental conditions; or (viii) which, based on Schlage’s examination, do not disclose to Schlage’s satisfaction
non-conformance to the warranty. Additionally, this warranty DOES NOT COVER scratches, abrasions, or deterioration due to the use of paints, solvents or other
chemicals.
Exclusions: Oil Rubbed Bronze finish (613) is designed to improve over time and change in appearance, creating a living finish through daily use and thus, finish
discoloration is not applicable to the above warranty.
Additional terms: Schlage does not authorize any person to create for it any obligation or liability in connection with the Product. Schlage’s maximum liability
here under is limited to the original purchase price of the Product. No action arising out of any claimed breach of this warranty by Schlage may be brought by the
Original User more than one (1) year after the cause of action has arisen.
How local law applies: This warranty gives you specific legal rights, and you may also have other rights as otherwise permitted
by law. If this Product is considered a consumer product, please be advised that some local laws do not allow limitations on incidental or consequential damages
or how long an implied warranty lasts, so that the above limitations may not fully apply. Refer to your local laws for your specific rights under this warranty.
Guaranteed Fit Program: Schlage products are designed to fit standard residential door preparations and retrofit existing tubular locks. Note: Mortise locks and
preparations are not considered standard and are not guaranteed under this program. During the initial installation, if there is a problem with the Product’s
performance, the Original User may simply contact Schlage Customer Service at 888-805-9837 in the U.S. and Canada or 800-506-7866 in Mexico for assistance.
Program and warranty claims: If you encounter a residential door preparation or fit issue under the Guaranteed Fit Program or have a claim under this warranty, please contact Schlage Customer Service for repair, replacement or refund of the original purchase price in exchange for the return of the Product to Schlage.
Finish Care and Cleaning of External Trim
Finishes
505 (PVD Bright Brass), 605 (Bright Brass),
609 (Antique Brass), 612 ((Satin Bronze),
619 (Satin Nickel), 620 (Antique Pewter),
716 (Aged Bronze), 622 (Matte Black)
Care Guidelines
Lacquered or clear-coated finishes should be wiped with a soft, damp cloth. A mile soap may be lightly used if
very dirty. Particular care should be taken to avoid paint smears, thinners and strong cleaning agents as they
will quickly destroy the protective coatings and subject the finished to rapid oxidation and discoloration. Initial
care for finishes requires only periodic cleaning with mild non-abrasive soap and light buffing with a soft cloth.
613 (Oil Rubbed Bronze)
Wipe with a little vegetable oil on a soft cloth. Too much oil may leave a residue to come off on the hands.
Household detergents and mild abrasive powder may be used to restore the high metal color without seriously
affecting the original compound of the metal. Then rub with a paste wax,
625 (Bright Chrome), 626 (Satin Chrome)
Wipe with a soft damp cloth. A high grade chrome polish may be used according to directions to clean and
restore the original shine or satin finish.
To make a warranty claim, contact Schlage Customer Service:
United States
Schlage Customer Service
P. O. Box 1210, Olathe, KS 66051-1210
1-800-366-5625 (fax) 1-888-805-9837 (phone)
Mexico
Ingersoll Rand, S.A. de C.V.Blvd. Centro Industrial No. 11
Col. Industrial Puente de Vigas, Tlalnepantla Edo. De Mexico C.P.
54070 Telefono: 018005067866
MR-1573 REV 8.07
Warranty nfor ation: Lifetime - No Fault.
Three Year - No Fault. One Year - No Fault
Magna(are
Warranty
SECURITRONMAGNALOCKCORPORATION
warrants that it will replace at customer's
request, at any time for any reason, products
manufactured and branded by SECURITRON
since January 1, 1999. SECURITRONwill use
its best efforts to ship a replacement product
by next day air freight at no cost to the
customer within 24 hours ofSECURITRON's
receipt ofthe product from customer. If the
customer has an account with SECURITRON
or a valid credit card, the customer may
order an advance replacement product.
whereby SECURITRONwill charge the
customer's account for the price of the
product plus next day air freight, and will
credit back to the customer the full amount
ofthe charge, including outbound freight,
upon SECURITRON'sreceipt of the original
product from the customer. SECURITRON's
sale and exclusive liability, and customer's
sale remedy, is limited to the replacement
of the SECURITRONproduct when delivered
to SECURITRON'sfacility (freight and
insurance charges prepaid by customer). The
replacement, at SECURITRON'ssale option,
may be the identical item or a newer unit
which serves as a functional replacement In
the event that the product type has become
. obsolete in SECURITRON'sproduct line, this
MAGNACAREwarranty will not apply. This
MAGNACAREwarranty also does not apply to
custom, built to order, or non-catalog items,
items made by others (such as batteries),
retums for payment, distributor stock
reductions, returns seeking replacement
with anything other than the identical
product, or products installed outside of the
United States or Canada. This MAGNACAR:
warranty also does not apply to removal
or installation costs. SECURITRONwill 00
be liable to the purchaser, the customer '
anyone else for incidental or conseq
MAGr.:::.•..
"..,~..•~·
UF£TIME
REPLACEMENT
WNtRNiGl"
damages arising from any defect in, or
malfunction of, its products. SECURITRON
does not assume any responsibility for
damage or injury to person or property
due to improper care, storage, handling,
abuse, misuse, or an act of God. EXCEPT
AS STATEDABOVE,SECURITRO MAKES
o WARRANTIES,EITHEREXPRESSOR
IMPUED, ASTOANY MATTERWHATSOEVER,
I CLUDI GWITHOUT UMITATION THE
CONDmON OFITSPRODUCTS,THEIR
MERCHANTABIUTYOR FITNESSFORANY
PARTICULARPURPOSE.
SeruriCare Warranty
SECURITRO MAGNALOCKCORPORATION
wanrants tha it will repair or replace at
customer's request, at any time for any
reason, products manufactured and
branded by SECURITRONand wanrantied
by SECURlCAREsince June 1, 2009, for a
period of three (3) years from the original
purchase date. SECURITRO will use its
best efforts to ship a replacement product
by next day air freiqht a no cost to the
customer with· 2~hoursof~ECURITRO'j's
reee'pt of e product from custorner.1f the
customer has ec
. SECU
or a valid
customer may
order an a
cemen product.
which serves as a functional replacement. In
the event that the product type has become
obsolete in SECURITRON'sproduct line, this
SECURICAREwarranty will not apply. This
SECURICAREwarranty also does not apply to
custom, built to order, or non-catalog items,
items made by others (such as batteries),
returns for payment, distributor stock
reductions, returns seeking replacement
with anything other than the identical
product, or products installed outside of the
United States or Canada. This SECURICARE
wanranty also does not apply to removal
or installation costs. SECURITRONwill not
be liable to the purchaser, the customer or
anyone else for incidental or consequential
damages arising from any defect in, or
malfunction of, its products. SECURITRON
does not assume any responsibility for
damage or injury to person or property
due to improper care, storage, handling,
abuse, misuse, or an act of God. EXCEPT
AS STATEDABOVE,SECURITRONMAKES
NOWARRANTIES,EITHEREXPRESSOR
IMPLIED, ASTOANY MAnER WHATSOEVER,
INCLUDINGWITHOUT LIMITATIONTHE
CONDITIONOF ITSPRODUCTS,THEIR
MERCHANTABILITYORFITNESSFORANY
PARTICULARPURPOSE.
VistaCare Warranty
SECURlTRONMAGNALOCKCORPORATION
warrants that it will replace at customer's
request, for one (1) year from the date of
irMJice, for any reason, products branded
VIST by Securitron. SECURITRONwill use its
best efforts to ship a replacement product
by next day air freight at no cost to the
custornerwithin 24 hours ofSECURITRON's
fl'(f'jpt of the product from customer. If the
orner has an account with SECURITRON
a var. credit card, the customer may
customer's account for the price of the
product plus next day airfreight, and will
credit back to the customer the full amount
of the charge, including outbound freight,
upon SECURITRON'sreceipt ofthe original
product from the customer. SECURITRON's
sale and exclusive liability, and customer's
sale remedy, is limited to the replacement
of the VISTAproduct when delivered to
SECURITRON'sfacility (freight and insurance
charges prepaid by customer). The
replacement, at SECURITRON'ssale option,
may be the identical item or a newer unit
which serves as a functional replacement. In
the event that the product type has become
obsolete in SECURITRON'sproduct line, this
VISTAwarranty will not apply. This VISTA
warranty also does not apply to custom,
built to order, or non-catalog items, items
made by others (such as batteries), returns
for payment, distributor stock reductions,
returns seeking replacement with anything
other than the identical product, or
products installed outside ofthe United
States or Canada. This VISTAwarranty also
does not apply to removal or installation
costs. SECURITRONwill not be liable to the
purchaser, the customer or anyone else
for incidental or consequential damages
arising from any defect in, or malfunction
of, its products. SECURITRONdoes not
assume any responsibility for damage or
injury to person or property due to improper
care, storage, handling, abuse, misuse, or
an act of God. EXCEPTAS STATEDABOVE,
SECURITRONMAKES NOWARRANTIES,
EITHEREXPRESSORIMPLIED, ASTO
ANY MAnER WHATSOEVER,INCLUDING
WITHOUT LIMITATIONTHECONDITIONOF
ITSPRODUCTS,THEIRMERCHANTABILITYOR
FITNESSFORANY PARTICULARPURPOSE.
ff an advance replacement product,
iereby SECURITRONwill charge the
JECURITROtr
ASSAABLOY
™
Continuous Warranty
■ SELECT Products Limited will replace your SELECT Geared Continuous Hinge
if it ever fails under normal use, as long as it was installed in accordance with
the installation instructions enclosed with every new SELECT hinge.
■ SELECT Products Limited warrants its Geared Continuous Hinges
to be free from defect in material or workmanship.
■ This warranty is continuous and has no time limit.
The durability delivered by SELECT Hinges’ Pair-Matched™ hinge leaves,
lifetime lubrication and anodizing after machining has been proven in independent
performance testing surpassing 25,000,000 cycles (equivalent to 60+ years).
The warranty that never ends
for the hinge that never quits.
SM
Robert Cronk
Chief Operating Officer
Grant Young
President
Made in
USA
Geared to
ship in
SELECT Products Limited
9770 Shaver Road | Portage | MI 49024 | 800-423-1174 | www.select-hinges.com
Printed on recycled paper.
48
HOURS ™
LIMITED LIFETIME WARRANTY
STRATTEC Security Corp. (“STRATTEC”) warrants, to the original retail purchaser,
its padlock products to be free from defects in workmanship and materials for so long
as product is owned by original purchaser; normal wear and tear, abuse and misuse
excepted.
STRATTEC’s obligation under this warranty, and the original purchaser’s sole and
exclusive remedy, is limited to repair or replacement, at STRATTEC’s sole option,
provided, however that in the event that STRATTEC is unable to repair or replace the
item, then the original purchaser’s sole and exclusive remedy under this limited lifetime
warranty shall be a refund from STRATTEC of the original purchase price.
To obtain service under this warranty, the purchaser must: call STRATTEC at (877)
251-8798, for return authorization; return the product together with a dated proof of
purchase receipt to, STRATTEC Security Corp. 3333 W. Good Hope Rd. Milwaukee,
WI 53209.
Upon receipt of the returned item and verification of proof of purchase, STRATTEC, if
it determines that the defect is not due to normal wear and tear, abuse or misuse, will
repair, or at its sole option, replace and return, the item (at STRATTEC’s expense) to
the owner. Returned items, and any items which are removed and replaced by
STRATTEC, shall become the property of STRATTEC.
TO THE EXTENT PERMITTED BY LAW, STRATTEC HEREBY DISCLAIMS
ALL OTHER IMPLIED OR EXPRESS WARRANTIES INCLUDING, WITHOUT
LIMITATION, ANY WARRANTIES OF MERCHANTABILITY AND/OR FITNESS
FOR A PARTICULAR PURPOSE.
LIMITATION OF LIABILITY: This warranty is your sole remedy and STRATTEC
shall not be liable for any damages, whether direct, indirect, incidental, special,
consequential, exemplary, or otherwise, (including, without limitation, lost revenues,
loss of the use of vehicles, loss of time, and lost profits) arising out of any theory of
liability or recovery, including statutory, contract or tort. Notwithstanding the term of
any limited or implied warranty, or in the event that any limited warranty fails of its
essential purpose, in no event will STRATTEC's entire liability exceed the original
purchase price of this product.
This warranty gives you specific legal rights. You may have other rights which vary
from state to state. Certain states and jurisdictions may not allow the exclusion or
limitation of incidental or consequential damages, so the above exclusion or limitations
may not apply to you. This warranty gives you specific legal rights, and you may also
have other rights that vary from state to state and jurisdiction to jurisdiction.
WARRANTY
Warranty: The Company warrants that the product manufactured by it and delivered hereunder will be free of defects in
material and workmanship for a period as follows: (1) exit
devices and trim for 36 months from the date of placing the
product in operation or for 42 months from the date of
shipment; and (2) , and electrified exit devices and other
electrified products for 12 months from the date of placing
the product in operation or 18 months from the date of
shipment, whichever shall first occur. The Purchaser shall be
obligated to promptly report any failure to conform to this
limited warranty, in writing, to the Company within said limited warranty period, whereupon the Company shall, at its
option, correct such nonconformity, by suitable repair to such
product or, furnish a replacement part F.O.B. point of
shipment; provided the Purchaser has stored, installed,
maintained and operated such product in accordance with
good industry practices and has complied with specific recommendations of the Company. Accessories or product
furnished by the Company, but manufactured by others, shall
carry whatever warranty the manufacturers have conveyed to
the Company and which can be passed on to the Purchaser.
The Company shall not be liable for any repairs, replacements,
or adjustments to the product or any costs of labor performed
by the Purchaser or others without the Company’s prior
written approval.
The effects of corrosion, erosion and normal wear and tear are
specifically excluded from this limited warranty. Performance
warranties are limited to those specifically stated within the
Company’s proposal. Unless responsibility for meeting such
performance warranties are limited to specified shop or field
tests, the Company’s obligation shall be to correct in the
manner and for the period of time provided above.
The Company makes no other warranty or representation
of any kind whatsoever, expressed or implied, except that
of title, and all implied warranties of merchantability and fitness for a particular purpose, are hereby disclaimed. No agent,
representative, dealer, or employee of Company
has the authority to increase or alter the obligations of
this limited warranty.
Correction by the Company of nonconformities whether
patent or latent, in the manner and for the period of time provided above, shall constitute fulfillment of all liabilities
of the Company for such nonconformities, whether based
on contract, warranty, negligence, indemnity, strict liability
or otherwise with respect to or arising out of such Equipment.
The Purchaser shall not operate product which is
considered to be defective, without first notifying the
Company in writing of its intention to do so. Any such use
of product will be at the Purchaser’s sole risk and liability and
will not be covered by this limited warranty.
Customer Service: 800-999-0408 • Fax 800-999-0328
RMA requests (Return Material Authorization) are to
be directed to Von Duprin, 2720 Tobey Drive, Indianapolis, IN
46219. Attn: Customer Service.
LIFETIME LIMITED WARRANTY
T O T A L
S A T I S F A C T I O N
G U A R A N T E E
YALE RESIDENTIAL SECURITY PRODUCTS, INC. warrants against all defects in workmanship, materials and operation for our Residential line of products
(Design Elements™ from Yale®, Y H Collection™ from Yale®, New Traditions™ from Yale® Series, and Interconnected Series)
for as long as such lockset is used by the original end user of the product.
YALE RESIDENTIAL SECURITY PRODUCTS,INC. does not warrant defects with respect to any products that we determine were improperly installed or were
the consequences of uses for which our products were not designed. This warranty does not cover finish defects caused by the use of paints, solvents, or other chemicals
which come in contact with the lockset or resulting because the products were otherwise operated, maintained, repaired or altered improperly or contrary to our applicable
instructions. This warranty shall expire at such time as the original end user of the warranted product transfers ownership thereof to any other person.
Our only liabilty, whether in tort, or contract under this warranty or any expressed or implied warranty, is, at our option, to repair or replace locksets that are returned,
shipping charges prepaid and with our prior written authorization, to our customer shipping department at the address set forth below. IN NO EVENT SHALL YALE
RESIDENTIAL SECURITY PRODUCTS, INC. BE LIABLE TO YOU OR TO ANY OTHER PERSON FOR DIRECT OR INDIRECT, CONSEQUENTIAL,
INCIDENTAL, OR SPECIAL DAMAGES, ARISING BY REASON OF A BREACH OF THIS WARRANTY.
Products may only be returned to us hereunder. We will determine whether locksets returned for repair or replacement, qualify for repair or replacement
under this warranty; if they do not, we will notify our customer of estimated cost of repair or replacement and will obtain authorization prior to proceeding.
We have no liability to pay any costs to repairs performed by anyone other than us, unless in each instance we have given written approval to such repair.
YALE RESIDENTIAL SECURITY PRODUCTS, INC. shall not be responsible for any costs incurred for the removal or reinstallation of locksets
under the terms of this warranty. Cosmetic claims will be replaced only one time at no charge.
YALE RESIDENTIAL SECURITY PRODUCTS, INC. MAKES NO WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
WITH RESPECT TO THE PRODUCTS DELIVERED HEREUNDER. THIS LIMITED WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER EXPRESS
OR IMPLIED WARRANTIES WITH RESPECT TO THE PRODUCTS SOLD HEREUNDER.
SOME STATES DO NOT ALLOW LIMITATIONS OF HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATION OF INCIDENTAL
OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS AND EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC
LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
Yale Residential Security Products, Inc. • 2725B Northwoods Parkway • Norcross, Georgia 30071 • 800-542-7562
099900
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising