Viewpixe | TFT LCD MONITOR | User`s manual | Viewpixe TFT LCD MONITOR User`s manual

Viewpixe TFT LCD MONITOR User`s manual
USER'S MANUAL
TFT LCD MONITOR WITH TV
without USB
1
2
Caution
Safety Information
3
Unit an d Accessory
4
5-6
Front View
Remote Control Key Functions
Terminal board
Install and connect TV
7
8
9
10-16
17
18
Select Input Source & Basic Operation
Menu Operation
Help
Specifications
Caution
The lightening flash with arrowhead symbol, within an equilateral triangle is
intended to alert the user to the presence of un-insulated "dangerous voltage"
within the products enclosure that may be of
sufficient magnitude to constitute a
risk of electric shock to the persons.
The exclamation point within an equilateral triangle is intend to alert the user to
the presence of important operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
Correct disposal of this Product
W aste Electrical & Electronic Equipment (WEEE)
Your product is designed and manufactured with high quality materials and
components which can be recycled and reused.
This symbol means that electrical and electronic equipment, at their end-of-life,
should be disposed of separately from your household waste.
Please dispose of this equipment at your local community waste
collection/recycling centre.
In the European Union there are separate collection systems for used electrical
and electronic products. Please help us to conserve the environment we live in!
* Power outlet must be grounded
Caution:
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.2
19) Do not place any sources of danger on the apparatus (e.g. liquid filled objects, lighted candles).
20) Wall or Ceiling Mounting - The appliance should be mounted to a wall or ceiling only as
recommended by the manufacturer.
These servicing instructions are for use by qualified service personnel only. To reduce the risk of
electric shock do not perform any servicing other than that contained in the operating instructions.
unless you are qualified to do so.
2
Accessories
MUTE
POWER
1
2
3
4
5
6
7
8
9
-/--
0
MENU
INPUT
ENTER
EXIT
INFO
P.MODE
v+
v-
Main cable
SLEEP
ASPECT
P+
S.MODE
AV/TV
PC
PAUTO
FREEZE
R
3
LED
POWER
MENU
INPUT
(IR) Infrared Receiver: Receives IR signals from the remote control.
(Power on/Standby) LED Indicator: Press POWER to turn on and off,
Indicator on(Red)
Indicator on(Green)
Standby mode
Power on mode
1.POWER
4.
Set your TV to power on or standby mode.
2.MENU
Adjust the volume and move
cursor left/right.
Display the on-screen menu.
5.Remote Sensor
3. INPUT
Display input source.
4
MUTE
POWER
POWER
1
2
3
4
5
6
7
8
9
-/--
0
In the standby mode, the indicator light will be red.
In the boot mode, the indicator light will be green.
Return to previous TV channel.
MENU
INPUT
ENTER
EXIT
INFO
P.MODE
v+
vSLEEP
ASPECT
P+
S.MODE
AV/TV
PC
PAUTO
FREEZE
MENU Press this button to switch on OSD menu or return to
previous menu.
INPUT Press this button to select specific source such as TV, SV
or other channel.
INFO Press the button to display the information about the
program.
EXIT
Press this button to exit .
Menu button for left, right, up and down to move the cursor.
ENTER To confirm which you selected.
V+ VP+ P-
Press this button to adjust volume.
TV mode, press this button to select the following and
above channel.
P. MODE
S.MODE
Press this button to switch on picture mode.
Press this button to switch on sound mode.
R
5
MUTE
POWER
3
2
1
Press the button to select the screen size and
the ratio.
SLEEP Press this button to set sleep time.
ASPECT
4
5
6
7
8
9
-/--
0
MENU
FREEZE
Press the button to pause the picture and press
again the picture play.
USB
Press the button to turn source to MEDIA quickly.
INPUT
ENTER
EXIT
INFO
P.MODE
v+
vSLEEP
ASPECT
P+
S.MODE
AV/TV
PC
PAUTO
FREEZE
R
6
USB
HDMI
VGA PC AUDIO IN
1
VIDEO
R
L
Earphone
5
7
Side panel diagram
OFF
ON
POWER SWITCH
7
RF
side
* Power outlet must be grounded
3
standby
indicator
The Light is red
8
SOURCE
TV
AV
S-VIDEO
VGA
PICTURE
PICTURE MODE
CONTRAST
BRIGHTNESS
COLOR
TINT
SHARPNESS
COLOR TEMP.
NOISE REDUCTION
MOVE
STANDARD
50
50
50
50
6
NORMAL
ON
SELECT
MENU
EXIT
·Use MENU button to display the MAIN OSD MENU;
·Use 【▲】 /【▼】button to select the MENU you want;
·Use 【 ► 】 button to enter the sub menu;
You can use MENU or EXIT button to save and return back to the previous menu .
·Use 【▲】 /【▼】 button to select the option and then press 【◄】 /【 ► 】to adjust the value in the sub menu;
9
First Time Installation
If this is the first time you turn on the TV and there is no TV programs memory ,there will display First Time Installation
menu on screen just as the following picture. A screen will display asking you to run a Channel Auto Scan to search and
receive available local channels. And the channels will be stored in the TV tuner.
FIRST TIME INSTALLATION
LANGUAGE
COUNTRY
LANGUAGE
COUNTRY
START SEARCH
MOVE
MENU
SELECT
EXIT
·Use down【▼】arrow button to highlight LANGUAGE. Navigate using 【◄】 /【 ► 】arrow button to select the OSD
language. There are 6 language for selection: ENGLISH, GERMAN, FRENCH, SPANISH, ITALIAN, PORTUGUESE.
·Use down【▼】arrow button to highlight COUNTRY. Navigate using 【◄】 /【 ► 】arrow button to select the country.
There are 6 country for selection: UK, ITALY, SPAN, FRANCE, GERMANY, OTHER,.
After setting these items, you can press MENU to give up your installation and exit. Or press 【▼】 /【 ▲】 button to
highlight START SEARCH and then press【►】button, the Auto Search will begin as the following picture:
AUTO SCAN
AUTO SCAN
DTV
ATV
66.00MHZ
554.00MHZ
CH:4
MENU
Channel List
·Use down【OK】 button to call out the CHANNEL LIST.
CHANNEL LIST
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
MOVE
CH:20
MENU
EXIT
21
22
23
24
25
26
27
28
29
30
MENU
EXIT
8
EXIT
TV Information
Program Information
Press 【DISPLAY】 button to display program information.
1
No Signal
1
Auto
2
3
DK
4
5
1. Current Channel Number.
2. The colour system of current program, could be changed on Manual Tuning menu(an option of SETUP menu).
3. Current program name.
4. The sound system of current program, could be changed in Manual Tuning menu(an option of SETUP menu).
5. The NICAM mode of current program.
If the icon of NICAM mode is red, it means the current program supplies multiple NICAM signals, and you can
change it by pressing NICAM button.
Four kinds of NICAM modes and relative icons:
Mono
Stereo
Dual
Dual
PICTURE
The PICTURE menu offers options to enhance and refine the picture displayed on your TV based on ambient room light
PICTURE MODE, CONTRAST , BRIGHTNESS, COLOR, TINT,
and personal prefer-ences. Adjustment options include
SHARPNESS, COLOR TEMP. and NOISE REDUCTION.
How to Navigate:
【◄ 】 /【 ►】 arrow buttons to select PICTURE. Press
Press the MENU button on the remote control. Navigate using
【◄ 】 /【 ►】 arrow button to select your viewing
the down ▼ arrow button to highlight PICTURE MODE, then press the
preference from 4 factory options: STANDARD > MOVIE > VIVID > PERSONAL.
The STANDARD setting is recommended for most viewing environments. Depending on the ambient light level in the
room, you may ind one of the other options more pleasing.
PICTURE
STANDARD
PICTURE MODE
CONTRAST
BRIGHTNESS
COLOR
TINT
SHARPNESS
COLOR TEMP.
NOISE REDUCTION
MOVE
50
50
50
50
6
NORMAL
ON
SELECT
MENU
EXIT
To make more critical adjustments based on your own preferences in PERSONAL:
9
• Use down 【▼】 arrow button to highlight CONTRAST. Navigate using the
decrease contrast intensity.
【◄ 】 /【 ►】arrow buttons to increase or
• Use down 【▼】 arrow button to highlight BRIGHTNESS. Navigate using the
decrease overall brightness.
• Use down 【▼】 arrow button to highlight COLOR. Navigate using the
color intensity.
• Use down 【▼】 arrow button to highlight TINT. Navigate using the
green or reddish tint.
【◄ 】 /【 ►】 arrow buttons to increase or
【◄ 】 /【 ►】 arrow buttons to increase or decrease
【◄ 】 /【 ►】arrow buttons to adjust colors toward
• Use down 【▼】 arrow button to highlight SHARPNESS. Navigate using the
crisper edges in the picture.
【◄ 】 /【 ►】arrow buttons to soften or view
• Use down 【▼】 arrow button to highlight COLOR TEMP.. Navigate using the
(more bluish tone), NORMAL or WARM. The default setting is NORMAL.
【◄ 】 /【 ►】arrow buttons to select COOL
• Use down 【▼】 arrow button to highlight NOISE REDUCTION. Navigate using the
it ON or OFF.
【◄ 】 /【 ►】 arrow buttons to select
SOUND
The SOUND menu offers options to make sound enhancements while listening through the built-in speakers
How to Navigate:
Press the MENU button on the remote control. Navigate using
【◄ 】 /【 ►】arrow buttons to select SOUND . Press the
【▼】 arrow button to highlight SOUND MODE, then press the
【◄ 】 /【 ►】 arrow button to select your sound preference
from 4 factory options: STANDARD > MOVIE >MUSIC > PERSONAL.
SOUND
SOUND MODE
BASS
TREBLE
BALANCE
AVL
MOVE
STANDARD
50
50
50
ON
SELECT
MENU
EXIT
To make more critical sound adjustments based on your own preferences in PERSONAL:
• Use down 【▼】 arrow button to highlight Bass. Navigate using the
low frequency intensity.
【◄ 】 /【 ►】arrow buttons to increase or decrease
• Use down 【▼】 arrow button to highlight TREBLE. Navigate using the
high frequency intensity.
• Use down 【▼】 arrow button to highlight BALANCE. Navigate using the
towards the left or right speaker.
【◄ 】 /【 ►】arrow buttons to increase or decrease
【◄ 】 /【 ►】arrow buttons to adjust sound
• Use down【▼】arrow button to highlight AVL. Navigate using the【◄ 】 /【 ►】arrow buttons to select it ON or OFF.
10
SETTING
In the SETTING menu you may change the initial set up of preferences that include LANGUAGE, OSD TIMER, TRANSP-ARENCE, OVERSCAN, and RESET your TV back to its factory default status.
How to Navigate:
Press the MENU button on the remote control. Navigate using arrow【◄ 】 /【 ►】buttons to select SETTING. Gain access
to display options by pressing the down 【▼】 arrow button to highlight LANGUAGE or other options, then press【◄ 】 /
【 ► arrow buttons on your remote to select.
SETTING
ENGLISH
15 SEC
LANGUAGE
OSD TIMER
TRANSPARENCE
OVERSCAN
RESET
MOVE
80
ON
SELECT
MENU
EXIT
·Use down【▼】arrow button to highlight LANGUAGE. Navigate using 【◄】 /【 ► 】arrow button to select the OSD
language. There are 6 language for selection: ENGLISH > GERMAN> FRENCH> SPANISH> ITALIAN> PORTUGUESE.
·Use down【▼】arrow button to highlight OSD TIMER. Navigate using 【◄】 /【 ► 】arrow button to select the OSD
timer. There are 6 modes for selection: 5 SEC>10 SEC> 15SEC> 20SEC> 25 SEC> 30 SEC.
·Use down【▼】arrow button to highlight TRANSPARENCE. Navigate using 【◄】 /【 ► 】arrow button to select the
transparence of the OSD.
·Use down【▼】arrow button to highlight OVERSCAN. Navigate using 【◄】 /【 ► 】arrow button to select it ON or
OFF. But this option is only available in the HDMI source.
·Use down【▼】arrow button to highlight RESET. Navigate using【 ► 】arrow button to reset the options in the SETTING
menu.
FUNCTION
In the FUNCTION menu you may change the function set up of preferences that include SLEEP TIMER, ASPECT, TT
LANGUAGE , BLUE SCREEN, SYSTEM LOCK and FTI.
How to Navigate:
Press the MENU button on the remote control. Navigate using arrow 【◄ 】 /【 ►】buttons to select FUNCTION. Gain
access to display options by pressing the down 【▼】 arrow button to highlight SLEEP TIMER or other options, then press
【◄ 】 /【 ►】 arrow buttons on your remote to select.
11
FUNCTION
OFF
FULL
WEST
ON
SLEEP TIMER
ASPECT
TT LANGUAGE
BLUE SCREEN
SYSTEM LOCK
FTI
MOVE
SELECT
MENU
EXIT
·Use down【▼】arrow button to highlight SLEEP TIMER. Navigate using 【◄】 /【 ► 】arrow button to select the sleep
timer, and the TV will turn off automatically in the setting time . There are 9 modse for selection: 15 Min>30 Min> 45 Min>
60 Min> 75 Min> 90 Min> 105 Min> 120 Min> OFF.
·Use down【▼】arrow button to highlight ASPECT. Navigate using 【◄】 /【 ► 】arrow button to select: FULL> ZOOM
> SUBTITLE > 4:3>14:9>AUTO. The default setting is FULL. .
·Use down【▼】arrow button to highlight BLUE SCREEN. Navigate using 【◄】 /【 ► 】arrow button to select this option
ON or OFF.
·Use down【▼】arrow button to highlight SYSTEM LOCK. Navigate using 【 ► 】arrow button to select this option.
Enter your 4 digit code (factory default code is "0000") unless previously changed to enter the submenu.
ENTER PASSWORD
*
FUNCTION
ON
ON
ON
ON
SYSTEM LOCK
CHILD LOCK
KEY LOCK
PARENTAL
CHANGE CODE
MOVE
SELECT
MENU
EXIT
·Use down【▼】arrow button to highlight SYSTEM LOCK. Navigate using 【◄】 /【 ► 】arrow button to select this option
ON or OFF. When set the system lock OFF, the locks below will be unavailable.
·Use down【▼】arrow button to highlight CHILD LOCK. Navigate using 【◄】 /【 ► 】arrow button to select this option
ON or OFF. When set the child lock ON, the program locked in the PROGRAM EDIT can not be displayed.
·Use down【▼】arrow button to highlight KEY LOCK. Navigate using 【◄】 /【 ► 】arrow button to select this option
ON or OFF. When set the key lock ON, the key can not work.
·Use down【▼】arrow button to highlight CHANGE CODE. Navigate using 【 ► 】arrow button to change the password
of the system lock. A dialog as above will appear, the enter the new password can change the password successfully.
·Use down【▼】arrow button to highlight CHANGE CODE. Navigate using 【 ► 】arrow button to select this option ON or OFF.
·Use down MENU button to return to the main menu, then use down【▼】arrow button to highlight FTI. The operation
can be referred to page 5.
12
·Use down【▼】arrow button to highlight MANUAL SEARCH. Navigate using 【 ► 】arrow button to select it.
MANUAL SEARCH
54.00MHZ
STORE
STORE OK
EXIT
MENU
MOVE
·Use down【▼】arrow button to highlight AFT. Navigate using 【◄】 /【 ► 】arrow button to select this option ON or OFF.
·Use down【▼】arrow button to highlight FINE. Navigate using 【 ► 】arrow button to select this option.
73.50MHZ
FINE
EXIT
MENU
MOVE
·Use down【▼】arrow button to highlight SKIP. Navigate using 【◄】 /【 ► 】arrow button to select this option ON or OFF.
·Use down【▼】arrow button to highlight OVER MODULATION. Navigate using 【◄】 /【 ► 】arrow button to select
this option ON or OFF.
·Use MENU button to return to the main menu, then use down【▼】arrow button to highlight PROGRAM EDIT. Navigate
using 【 ► 】arrow button to enter the submenu.
PROGRAM EDIT
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
LOCK
NAME
INSERT
FAV
MOVE
MENU
EXIT
This option has four functions.
·Use Green button and the 【▲】 /【▼】arrow button to name the current channel.
·Use Yellow button to insert the current channel.
·Use Red button to set the current channel to lock. if the current channel already lock, press blue button again will unlock.
·Use Blue button set the current channel to your favorite channel. if the current channel already be one of your favorite
channel, press Blue button again will set it to a normal channel.
13
CHANNEL
In the CHANNEL menu you may change the channel set up of preferences that include COUNTRY, AUTO SCAN, MANUAL
PROGRAM and PROGRAM EDIT.
How to Navigate:
【◄ 】 /【 ►】buttons to select CHANNEL. Gain
Press the MENU button on the remote control. Navigate using arrow
【▼】 arrow button to highlight COUNTRY or other options, then press
access to display options by pressing the down
【◄ 】 /【 ►】 arrow buttons on your remote to select.
CHANNEL
UK
COUNTRY
AUTO SCAN
MANUAL PROGRAM
PROGRAM EDIT
MOVE
SELECT
MENU
EXIT
·Use down【▼】arrow button to highlight COUNTRY and AUTO SCAN. The operation of these two optins can be referred
to page 5.
·Use down【▼】arrow button to highlight MANUAL PROGRAM. Navigate using 【 ► 】arrow button to enter the submenu.
CHANNEL
1
AUTO
AUTO
PROGRAM
COLOR. SYS
SOUND. SYS
MANUAL SEARCH
AFT
FINE
SKIP
OVERMODULATION
MOVE
ON
OFF
OFF
SELECT
MENU
EXIT
·Use down【▼】arrow button to highlight PROGRAM. Navigate using 【◄】 /【 ► 】arrow button to select the program
that you want to watch.
·Use down【▼】arrow button to highlight COLOR. SYS. Navigate using 【◄】 /【 ► 】arrow button to select the color
system: AUTO>PAL> SECAM.
·Use down【▼】arrow button to highlight SOUND. SYS. Navigate using 【◄】 /【 ► 】arrow button to select the sound
system: B/G> D/K> L> LL.
14
PICTURE
The PICTURE menu offers options to enhance and refine the picture displayed on your TV based on ambient room light
, CONTRAST , BRIGHTNESS and COLOR.
and personal preferences. Adjustment options include PICTURE MODE
How to Navigate:
【◄ 】 /【 ►】 arrow buttons to select PICTURE. Press
Press the MENU button on the remote control. Navigate using
【◄ 】 /【 ►】 arrow button to select your viewing
the down ▼ arrow button to highlight PICTURE MODE, then press the
preference from 4 factory options: STANDARD > MOVIE > VIVID > PERSONAL.
The STANDARD setting is recommended for most viewing environments. Depending on the ambient light level in the
room, you may ind one of the other options more pleasing.
PICTURE
PICTURE MODE
CONTRAST
BRIGHTNESS
COLOR
MOVE
STANDARD
50
50
50
SELECT
MENU
EXIT
To make more critical adjustments based on your own preferences in PERSONAL:
• Use down 【▼】 arrow button to highlight CONTRAST. Navigate using the
decrease contrast intensity.
【◄ 】 /【 ►】arrow buttons to increase or
• Use down 【▼】 arrow button to highlight BRIGHTNESS. Navigate using the
decrease overall brightness.
• Use down 【▼】 arrow button to highlight COLOR. Navigate using the
color intensity.
【◄ 】 /【 ►】 arrow buttons to increase or
【◄ 】 /【 ►】 arrow buttons to increase or decrease
PC SETUP
The PC SETUP menu is just for the PC Mode.
In the PC SETUP menu you may change the channel set up of preferences in PC MODE that include
H-POSITION, CLOCK, PHASE and AUTO ADJUST.
H-POSITION ,
How to Navigate:
【◄ 】 /【 ►】buttons to select PC SETUO. Gain
Press the MENU button on the remote control. Navigate using arrow
【▼】 arrow button to highlight H-POSITION or other options, then press
access to display options by pressing the down
【◄ 】 /【 ►】 arrow buttons on your remote to select.
15
PC SETUP
50
100
100
97
H-POSITION
V-POSITION
CLOCK
PHASE
AUTO ADJUST
MOVE
SELECT
MENU
EXIT
·Use down【▼】arrow button to highlight H-POSITION. Navigate using 【◄】 /【 ► 】arrow button to select the
H-POSITION.
·Use down【▼】arrow button to highlight V-POSITION. Navigate using 【◄】 /【 ► 】arrow button to select the
V-POSITION.
·Use down【▼】arrow button to highlight CLOCK. Navigate using 【◄】 /【 ► 】arrow button to select the CLOCK.
·Use down【▼】arrow button to highlight AUTO ADJUST. Using 【 ► 】arrow button to auto adjust the options above.
V-POSITION.
Notes: 1. SOUND menu and description are the sameas that for TV mode.
2. SETTING menu and description are the same as that for TV mode.
3. FUNCTION menuand description are the same as that for TV mode .
16
HELP
a
17
SPECIFICATIONS
15"
PAL SECAM AUTO
PC input,
4Ω 5W
<36W
17"
PAL SECAM AUTO
PC input,
4Ω 5W
<48W
18
Model: 1501 1701
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising