Mio | MiVue 5 series | User manual | Mio MiVue 5 series User manual

Mio MiVue 5 series User manual
User Manual
Series
Table of Contents
Getting to know the recorder......................................................................................................... 2
Power key.....................................................................................................................................3
Function keys...............................................................................................................................3
System icons................................................................................................................................4
LED indicators..............................................................................................................................4
Inserting a memory card.................................................................................................................. 5
Using your recorder in a vehicle.....................................................................................................6
Connecting to external devices......................................................................................................8
Connecting to your computer..................................................................................................8
Connecting to a High Definition (HD) device........................................................................8
Operating basics................................................................................................................................9
Turning the recorder ON and OFF...........................................................................................9
Setting the date and time..........................................................................................................9
Recording in driving mode....................................................................................................... 10
Recording in Parking mode.......................................................................................................11
Camera mode............................................................................................................................ 12
Playback mode.......................................................................................................................... 12
Safety camera alerts (for selected models only)................................................................ 13
System settings...............................................................................................................................14
Settings Menu............................................................................................................................14
Advanced settings..................................................................................................................... 15
MiVue Manager............................................................................................................................... 17
Installing MiVue Manager....................................................................................................... 17
Playing the recording files....................................................................................................... 17
For more information.....................................................................................................................20
Precautions and notices...........................................................................................................20
Safety precautions....................................................................................................................20
About GPS (for selected models only).................................................................................. 21
Caring for your device..............................................................................................................22
Regulatory information (CE)..................................................................................................23
WEEE...........................................................................................................................................23
1
Getting to know the recorder
Name
2
1
Device mount socket
For the device mount.
2
Mini-USB connector
Connects to the charger or
computer.
3
HD OUT connector
Connects to an external device.
4
LCD screen
5
Function keys
6
LED indicator 1
Indicates the system status of
the recorder.
7
Power key
8
Memory card slot
Videos are recorded to a
MicroSD card (may be sold
separately).
9
Speaker
Outputs audio.
10
Camera lens
11
LED indicator 2
Parking mode indicator.
12
Microphone
Allows you to record the video
with sounds.
Power key
Once the vehicle engine is started, the recorder automatically turns on. By default, the
recording will start right after the recorder turns on.
You can perform the following using the Power key:
ƒƒ To manually turn the recorder on and off, press and hold
the Power key for 2 seconds.
ƒƒ When the recorder is turned on, press and release the
Power key to switch the LCD screen on/off.
Function keys
The device provides four function keys to control the corresponding icons displayed at the
bottom of the LCD screen. The key’s function may vary on different screens. For example,
the device will display four icons as shown below while continuous recording is in progress.
Example
Icon
Description
Press to enter the Settings Menu.
Press to manually activate Parking mode.
Press to take a photo.
Press to manually start an emergency
recording.
3
System icons
Various System icons on the title bar at the top of the screen provide the status information
of your device. The icons displayed will vary depending on your device model and state.
Example
Icon
Description
The REC icon blinks while recording is in progress.
Displays the current time.
/
Recording with sound is disabled/enabled.
The GPS signal icon indicates the GPS status*.
The Battery icon indicates the remaining battery power.
The SpeedCam icon appears when a speed camera is
detected*.
* For selected models only.
LED indicators
Status
The power cable is connected and the recorder is on:
ƒƒ The battery is charging, and
- the recording is in progress.
- the recording is stopped.
ƒƒ The battery is fully charged, and
- the recording is in progress.
- the recording is stopped.
The recorder switches to Parking mode, and:
ƒƒ The parking recording is in progress.
ƒƒ The parking recording is stopped.
4
LED 1
LED 2
Green, Amber / Blinking
Green / On
OFF
OFF
Red / Blinking
OFF
OFF
OFF
Red / Blinking
OFF
Red / Blinking
Red / Blinking
Inserting a memory card
You must insert a memory card (may be sold separately) before you can start recording.
1. Hold the card by the edges and gently insert it into the slot with the label facing the
rear side of the recorder.
2. To remove a card, gently push the top edge of the card inwards to release it, and pull it
out of the slot.
CAUTION:
ƒƒ DO NOT apply pressure to the centre of the memory card.
ƒƒ You are advised to use a Class 6 memory card with at least 8GB capacity. The
recorder supports memory cards with up to 32GB capacity.
ƒƒ MiTAC does not guarantee the product’s compatibility with memory cards from all
manufacturers.
ƒƒ Before you start recording, please format the memory card to avoid malfunction
caused by files not created by the recorder. You can format the card on your
computer or on the recorder (by selecting Settings Menu > Format).
ƒƒ You are recommended to turn the device off before removing the memory card.
5
Using your recorder in a vehicle
1. Make sure that your car is parked on a level ground.
2. Follow the instruction below to mount your recorder in a vehicle securely.
3. Connect the car charger to the
cigarette lighter. Route the cables
through the top ceiling and the
A-pillar so that it does not interfere
with driving. Ensure the cable
installation does not interfere with
the vehicles airbags or other safety
features.
6
4. When adjusting the angle of mounting, make sure that the camera’s view is parallel
with the level ground, and the ground/sky ratio is close to 6/4.
5. When not using the recorder, follow the instruction below to remove the recorder from
the holder.
NOTE:
ƒƒ To ensure the highest quality recordings, you are advised to place the recorder near
the rear view mirror.
ƒƒ Select an appropriate location for mounting the device in a vehicle. Never place the
device where the driver’s field of vision is blocked.
ƒƒ (For selected models only) If the car’s windscreen is tinted with a reflective coating, it
may be athermic and impact the GPS reception. In this instance, please mount your
device where there is a “clear area.”
ƒƒ The system will automatically calibrate the G sensor of the device during boot up.
To avoid G sensor malfunction, always turn the device on AFTER you mount it in the
vehicle properly.
7
Connecting to external devices
Connecting to your computer
You can connect the recorder to your computer to access data on the memory card.
The Mini-USB connector is located on the right side of the device. Follow the instruction
below to connect the rcorder to the computer via the USB cable (not supplied).
Connecting to a High Definition (HD) device
For a better viewing experience, you can connect the recorder to an external viewing device
that supports the High Definition (HD) feature via a HD cable (not supplied).
The HD OUT connector is located on the right side of the device. Follow the instruction
below to connect the recorder to the HD device.
8
Operating basics
Turning the recorder ON and OFF
Complete the installation according to the instructions in the “Using your recorder in a
vehicle” section.
ƒƒ Once the vehicle engine is started, the recorder automatically turns on. By default, the
recording will automatically start in few seconds after start-up.
ƒƒ When a GPS fix is established, the GPS signal icon will show on the top-right corner
of the screen (for selected models only). The number of the vertical bars in the icon
indicates the strength of the signal.
ƒƒ When the recorder is turned on, press and release the Power key to switch the LCD
screen on/off.
ƒƒ To manually turn the recorder on and off, press and hold the Power key for 2 seconds.
Restarting the recorder
Occasionally, you may need to perform a hardware reset when the recorder stops
responding; or appears to be “frozen” or unresponsive.
To restart the recorder, press and hold the Power key until the system is shut down; press the
Power key again to turn the recorder on.
Setting the date and time
To make sure of the correct date and time for your recordings, please check the date and
time settings before you begin recording.
1. Press
to access the Settings Menu.
2. Select System > Date / Time and press
.
3. Select Automatic or Manual:
9
ƒƒ When you select Automatic, the system will display the time zone setting screen.
Use
/
to select your time zone and press
. The system will set the correct
date and time according to the time zone setting.
ƒƒ When you select Manual, the system will display the date and time setting screen.
Use
/
to adjust the value of the selected field; press
until all fields have been changed. When completed, press
and repeat the step
.
Recording in driving mode
NOTE:
ƒƒ DO NOT remove the memory card while recording.
ƒƒ If the recording is ongoing but there is not enough space on your memory card, the
system will display a warning message on the screen. Once confirmed, the new video
clips will replace the old ones.
Continuous recording
When you connect the car charger to the cigarette lighter in the car, the recorder will start
continuous recording automatically. The recording may be divided into several video clips;
recording will not stop between video clips.
ƒƒ When continuous recording is in progress, you can manually stop recording by pressing
.
Press
to return to the recording screen; the system will start continuous recording
automatically.
ƒƒ The continuous recordings can be found in the “Video” category for file playback.
10
Emergency recording
By default, if an event happens, such as sudden impact, high-speed driving, an aggressive turn
or an accidental crash, the G sensor will prompt the recorder to start an emergency recording.
ƒƒ If you want to manually start an emergency recording while continuous recording is in
progress, press
.
To stop emergency recording and resume continuous recording, press
.
ƒƒ The emergency recordings can be found in the “Emergency” category for file playback.
Recording in Parking mode
Your recorder supports parking recording function. Depending on how long the car is parked,
you may need an external power source (e.g. a power bank) to record the video while the
device's power cable is disconnected.
ƒƒ Parking mode is disabled by default. You have to enable the function by selecting
Settings Menu > Parking Mode > Detection > On.
Before enabling Park mode, please check your device memory storage allocation. Go to
Settings Menu > System > Storage allocation and use
/
to set a proper
allocation for parking recording, and then tap
to save. Changing the allocation will
erase the memory card, so save any videos or photos to your computer first.
ƒƒ When Parking mode is enabled and the device is power off (e.g. the vehicle engine is
stopped or the power cable is disconnected) or the car stops moving for 5 minutes*, the
system activates Parking mode.
* The feature is triggered by the G sensor of the device. You can change the configuration from
Settings Menu > Parking Mode > Auto Entry.
ƒƒ If you want to manually activate Parking mode while continuous recording is in progress,
press
. To stop Parking mode and resume continuous recording, press the Power key.
ƒƒ Once the movements were detected and recorded during Parking mode, you will be
asked to watch the video when you stop Parking mode. Follow the on-screen prompts to
11
watch videos or resume continuous recording.
ƒƒ The parking recordings can be found in the “Parking” category for file playback.
Camera mode
The recorder allows you to take a photo.
ƒƒ If the recording is in progress, press
to take a photo.
ƒƒ The photos can be found in the “Photo” category for file playback.
Playback mode
To select a video or photo for playback:
1. Press
to access the Settings Menu.
2. Select File Playback and press
.
3. Select the desired type and press
.
The types include: Video (continuous recordings), Emergency, Parking (parking
recordings) and Photo.
4. Use the
/
key to select the desired file from the list, and then press
playback.
5. During playback, you can:
ƒƒ Press
to start
to return to the list.
ƒƒ While playing videos, press
Pause or Delete the file.
ƒƒ While viewing photos, press
to delete the current photo.
/
to play the previous/next video. Press
/
to display the previous/next photo. Press
12
to
Safety camera alerts (for selected models only)
Caution: For legal reasons the safety camera function is not available in all countries.
You can receive alerts to warn you about the locations of safety cameras, which will enable
you to monitor your speed through these areas.
When a safety camera appears and is positioned in the detectable direction, you will receive
alerts. The screen will display the visual alert, and you will also receive audio warnings.
You can change the settings about how you want to receive the safety camera alerts. (See
the “System settings” section for information.)
Updating safety camera data
MiTAC does not warrant that all types and locations of safety camera data are available, as
cameras may be removed, relocated or new cameras installed.
Occasionally MiTAC may offer you updates of safety camera data. Visit the MiTAC website
for available downloads, and follow the instructions to complete the update.
13
System settings
Settings Menu
To customise the system settings, press
.
Item
Description
File Playback
Plays the recorded videos and photos.
For more information on playback, see the "Playback mode" section.
Record Sound
Sets if you want to include sounds in the recordings.
The default setting is On.
SafetyCam
(for selected
models only)
Sets how you want to be notified of safety cameras.
The available settings include:
- Alert Sound: Select Beep, Voice, or Mute.
- Alert Distance: Select Short, Medium, or Long.
- Alert Method: Select By Driving Speed or By Speed Limit.
- Threshold: For example, select At Speed Limit, At Speed Limit +5 km/h, or
At Speed Limit +10 km/h.
Parking Mode
Allows you to change the settings of Parking mode.
The available settings include:
- Detection: Select On or Off. When enabled, the recorder will start recording
automatically when it detects movements or if an event happens in Parking
mode.
- Auto Entry: Select Easy, Medium, or Difficult.
- Motion Detection: Select Low, Medium, or High.
- LED Indicator: Select On or Off.
Video Recording
Changes the settings of recording, including:
- Video Clip Length: Sets the length of each video clip for a continuous
recording (1 min, 3 min, or 5 min).
14
Item
Description
- EV: Sets the proper exposure level (-1 ~ +1) to adjust the brightness of the
image. The default setting is 0.
- HDR: Select On or Off to enable or disable High Dynamic Range function of
the device.
- GPS Stamp: Sets if and how you want to record the GPS information.
G-Sensor
Sensitivity
When enabled, the G sensor will prompt the recorder to start recording
automatically if an event happens.
Select Emergency or Parking Mode, and then change the sensitivity level of the
G sensor.
Please note that it is harder to trigger when you set the sensitivity level lower.
System
Allows you to change the system settings of the device.
For more information, see the "Advanced settings" section.
Format
Formats a memory card. (All data will be erased.)
Advanced settings
The System option in the Settings Menu porvides the advanced settings for the system.
ƒƒ GPS Status: Displays the status of GPS signal reception.
ƒƒ Date/Time: Sets the system date and time. For more information, see the "Setting the
date and time" section.
ƒƒ Beep Alert: Enables or disables system notification sounds.
ƒƒ Volume: Adjusts the volume level.
ƒƒ LCD Standby: Select Always On or select how long (10 sec, 1 min, or 3 min) the screen
remains lit after you press any key.
ƒƒ Language: Sets the language.
ƒƒ Distance Unit: Sets the preferred distance unit.
ƒƒ Storage Allocation: The system provides four default memory configurations to store
15
the videos (including continuous recording, emergency recording and parking recording)
and photos. Select the proper configuration based on your usage.
ƒƒ Restore to Defaults: Restores system settings to factory defaults.
ƒƒ Version: Displays the software information.
16
MiVue Manager
MiVue Manager is a tool for you to view the videos recorded on a MiVue recorder. Not all
features are available for every model.
Installing MiVue Manager
Download MiVue Manager from www.mio.com and follow the on-screen prompts to install
it.
Playing the recording files
1. Remove the memory card from the recorder and access the card on the computer via a
card reader. You are advised to copy the recording files to your computer for backup and
playback.
You may also leave the memory card inserted in the MiVue device and connect the
device to your computer via a USB cable.
2. Start MiVue Manager on the computer.
Minimise
Maximise
Exit
Calendar
Video playback
screen
File type
Playback
controls
File list
Map screen
G sensor chart
17
NOTE:
ƒƒ The Map screen may not display when the computer is not connected to the Internet
or when your MiVue model does not support the GPS function.
ƒƒ G sensor chart displays data in 3-axis waveform about the car’s shift forward/
backward (X), to the right/left (Y) and upward/downward (Z).
3. By default, MiVue Manager shows the calendar and the file list on the right.
ƒƒ When a recording file exists, you will see the date
marked with “▲.” Click that date to display the files
that were recorded on that date.
ƒƒ You can choose the file type to display:
Event (emergency recordings); or/and
Normal (continuous recordings); or/and
Parking (parking recordings).
ƒƒ To display all files in the current
folder, click All. To return to the
calendar view, click Calendar.
You can also click
on the upper-
left corner to select the folder that
stores the recording files.
4. Double-click the desired file on the file list to start playback.
5. The playback controls are described as follows:
ƒƒ
/
: Starts or pauses the playback.
ƒƒ
/
: Skips to the previous / next file on the list.
ƒƒ
: Changes the playback speed to 1/4x, 1/2x, 1x (default), 1.5x, or 2x.
18
ƒƒ
/
: Mutes or unmutes the volume.
ƒƒ
: Adjusts the volume level.
ƒƒ
: Plays the video in full screen. Click
ƒƒ
to return to the normal view.
: Displays the playback progress. You can click on a point along
the track bar to move directly to a different location for the playback.
6. The tool bar allows you to do the following:
ƒƒ Click
to select the folder that stores the recording files.
ƒƒ Click
to preview and print the current video image.
ƒƒ Click
to back up the selected files to the specified location on your computer.
to capture and save the current video image to the specified location on
ƒƒ Click
your computer.
ƒƒ Click
/
to upload the selected file to YouTube/Facebook.
ƒƒ Click
to export the GPS information of the selected file in the KML format to the
specified location on your computer.
ƒƒ Click
to open the Settings Menu. The Settings items are described as follows:
Change Language: Sets the display language of MiVue Manager.
Change Skin: Sets the color scheme of MiVue Manager.
Check for Update: Checks if there is any new version of MiVue Manager. Internet
access is required for this feature.
About: Displays the version and copyright information of MiVue Manager.
19
For more information
Precautions and notices
ƒƒ For your own safety, do not operate the controls of the product while driving.
ƒƒ A window mount is needed when using the recorder in a car. Make sure that you
place the recorder in an appropriate place, so as not to obstruct the driver’s view or
deployment of airbags.
ƒƒ Make sure that no object is blocking the camera lens and no reflective material is placed
near the lens. Please keep the lens clean.
ƒƒ If the car’s windscreen is tinted with a coating, it may impact the recording quality.
Safety precautions
About charging
ƒƒ Use only the charger supplied with your device. Use of another type of charger may
result in malfunction and/or danger.
ƒƒ This product is intended to be supplied by a LISTED Power Unit marked with “LPS”,
“Limited Power Source” and output rated + 5 V dc / 1.0 A.
ƒƒ Use a specified battery in the equipment.
About the charger
ƒƒ Do not use the charger in a high moisture environment. Never touch the charger when
your hands or feet are wet.
ƒ
ƒ Allow adequate ventilation around the charger when using it to operate the device or
charge the battery. Do not cover the charger with paper or other objects that will reduce
cooling. Do not use the charger while it is inside a carrying case.
ƒƒ Connect the charger to a proper power source. The voltage requirements are found on
the product case and/or packaging.
ƒƒ Do not use the charger if the cord becomes damaged.
20
ƒƒ Do not attempt to service the unit. There are no serviceable parts inside. Replace the
unit if it is damaged or exposed to excess moisture.
About the battery
CAUTION! This unit contains a non-replaceable internal Lithium Ion battery. The battery
can burst or explode, releasing hazardous chemicals. To reduce the risk of fire or burns, do
not disassemble, crush, puncture, or dispose of in fire or water.
ƒƒ Use a specified battery in the equipment.
ƒƒ Important instructions (for service personnel only)
ƒƒ Caution! Risk of explosion if battery is replaced by an incorrect type. Dispose of used
batteries according to the instructions.
ƒƒ Replace only with the same or equivalent type recommended by the manufacturer.
ƒƒ The battery must be recycled or disposed of properly.
ƒƒ Use the battery only in the specified equipment.
About GPS (for selected models only)
ƒƒ GPS is operated by the United States government, which is solely responsible for the
performance of GPS. Any change to the GPS system can affect the accuracy of all GPS
equipment.
ƒƒ GPS satellite signals cannot pass through solid materials (except glass). When you
are inside a tunnel or building, GPS positioning is not available. Signal reception can
be affected by situations such as bad weather or dense overhead obstacles (e.g. trees,
tunnels, viaducts and tall buildings).
ƒƒ The GPS positioning data is for reference only.
21
Caring for your device
Taking good care of your device will ensure trouble-free operation and reduce the risk of
damage.
ƒƒ Keep your device away from excessive moisture and extreme temperatures.
ƒƒ Avoid exposing your device to direct sunlight or strong ultraviolet light for extended
periods of time.
ƒƒ Do not place anything on top of your device or drop objects on your device.
ƒƒ Do not drop your device or subject it to severe shock.
ƒƒ Do not subject your device to sudden and severe temperature changes. This could cause
moisture condensation inside the unit, which could damage your device. In the event of
moisture condensation, allow the device to dry out completely before use.
ƒƒ The screen surface can easily be scratched. Avoid touching it with sharp objects. Nonadhesive generic screen protectors designed specifically for use on portable devices with
LCD panels may be used to help protect the screen from minor scratches.
ƒƒ Never clean your device with it powered on. Use a soft, lint-free cloth to wipe the screen
and the exterior of your device.
ƒƒ Do not use paper towels to clean the screen.
ƒƒ Never attempt to disassemble, repair or make any modifications to your device.
Disassembly, modification or any attempt at repair could cause damage to your device
and even bodily injury or property damage and will void any warranty.
ƒƒ Do not store or carry flammable liquids, gases or explosive materials in the same
compartment as your device, its parts or accessories.
ƒ
ƒ To discourage theft, do not leave the device and accessories in plain view in an
unattended vehicle.
ƒƒ Overheating may damage the device.
22
Regulatory information (CE)
For regulatory identification purposes, Mio MiVue 528/538 series is assigned a model
number of N467.
Products with the CE marking comply with the Electromagnetic Compatibility
Directive (2004/108/EC) - issued by the Commission of the European Community.
Compliance with these directives implies conformity to the following European Standards:
EN 301 489-1 V1.9.2 : 2011
-EN 61000-4-6 : 2009
EN 301 489-3 V1.4.1 : 2002
-EN 61000-4-8 : 2010
EN 55022:2010, Class B
ISO7637-2 : 2008
EN 55024:2010
EN 300 440-1 V1.6.1 : 2010
-EN 61000-4-2 : 2010
EN 300 440-2 V1.4.1 : 2010
-EN 61000-4-3 : 2010
IEC 60950-1 : 2005+ A1 : 2009
The manufacturer cannot be held responsible for modifications made by the User and the
consequences thereof, which may alter the conformity of the product with the CE Marking.
Declaration of conformity
Hereby, MiTAC Europe Ltd declares that this N467 is in compliance with the essential
requirements and other relevant provisions of Directive 2004/108/EC.
WEEE
This product must not be disposed of as normal household waste, in accordance
with the EU directive for waste electrical and electronic equipment (WEEE –
2002/96/EC). Instead, it should be disposed of by returning it to the point of sale,
or to a municipal recycling collection point.
23
Revision: R00
(04/2014)
Trademarks
All brand and product names are trademarks or registered trademarks of their
respective companies.
Disclaimer
Specifications and documents are subject to change without notice. MiTAC
Europe Ltd does not warrant this document is error-free. MiTAC Europe Ltd
assumes no liability for damage incurred directly or indirectly from errors,
omissions, or discrepancies between the device and the documents.
Notes
Not all models are available in all regions.
Depending upon the specific model purchased, the color and look of your
device and accessories may not exactly match the graphics shown in this
document.
MiTAC Europe Ltd
www.mio.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising