CAB | EOS4 | Technical data | CAB EOS4 Technical data

CAB EOS4 Technical data
CAB Labelprinter EOS
Labelprinter EOS1 - EOS4
EOS1 for label rolls up to 155 mm
ø.
EOS4 for label rolls up to 210 mm
ø.
The new thermal printer – a modern, cost-effective solution for printing labels in production, logistics
and retail.
The key feature of the new EOS is that it is the first label printer to be fitted with a touchscreen as
standard. This makes it easy to call up existing labels, add data and print them off – all without being
connected to a PC.
Complete labels can be saved to a USB memory stick or the internal memory of the EOS printer.
EOS1 and EOS4 differ in terms of their size. The larger EOS4 can accommodate label rolls up to 8”
in diameter. All labels are centered automatically in the printer.
Both units are available with 203 or 300 dpi resolution. What’s more, wear parts can be replaced in
a matter of seconds – usually without the need for any tools.
Product type overview
One concept – two sizes
Type B with tear-off plate
30 mm of material is needed
for tear-off.
Type C with cutter
Labels or continuous material can
becut at a height of 10 mm.
Type P with dispensing function
(only EOS4). The label height at
dispensing is 20 - 200 mm.
Technical detail
•
•
•
•
The new EOS series combines all functions of a
solid industrial printer with highest ease of operation.
Two additional USB interfaces are located below
the LCD display to connect a standard PC key
board, a scanner or an USB memory stick.
With the high-tech electronics, the intelligent print
head and efficient power supply the EOS is parti
cularly energy efficient and environmentally friendly.
The big, clearly laid out touchscreen LCD display is
easy to operate.
•
•
•
In stand-alone mode the label data is entered via
keyboard directly into the printer. A PC is not
necessary any more.
The housing of the EOS devices are made of highclass ABS synthetic with translucent cover and are
perfectly harmonized in their form and function.
The BBK label software LabelsPlatform supports all
printer functions optimally.
3
4
1
7
5
8
2
1 Touchscreen – LCD display
Clearly designed for highest ease of use.
2 Two additional USB interfaces
For the connection of a keyboard or a memory
stick, in stand-alone mode or to test the service key.
3 Roll holder
The label roll is inserted and centered
automatically when closing the cover.
4 Ribbon retainer
The stop is adjustable to the foil width.
5 Gap or reflective sensor
The sensor position is adjustable by the red knob
via a spindle. The set position is displayed with a
LED. Color and luminance sensor on request.
6
6 Label guide
The guides are adjusted to the material width with
the green knob.
7 Printhead 203 or 300 dpi
The printhead can be easily removed manually for
cleaning or replacement.
8 Drive roller
It can be removed for cleaning or replacement
with a click without a tool. When printing very
narrow labels, we recommend using narrow drive
rollers with a width of 25 or 50 mm to avoid the
possibility of the printhead rubbing on the drive
roller. This ensures a better print image and
lengthens the life of the printhead.
Technical data
Standard
Label printer
EOS1
Printhead
Option
EOS4
Printing method
Thermal transfer/Thermal direct
Print resolution dpi
203 / 300
Print speed mm/s
30, 40, 50, 75, 100, 125
Print speed mm/s
108 / 105,6
Material1)
Continuous material on rolls / fanfolded
Paper, cardboard, textiles, plastics, PET, PE, PP, PVC, PU, acrylate, PI
Thickness mm
0,055 - 0,7
Width: Labels mm
single lan 10 – 116, or multi lan 5 – 116
Carrierpaper / Continuous material mm
25 – 120 / 6 – 120
Height Labels / Continuous material mm
6 – 1000 / 10 – 1000
Media roll: External diameter up to mm
155 and 152,4
210 and 203,2
Core diameter mm
38-40 and 76
Winding direction
outside or inside
Ribbon
Ink
outside or inside
Roll diameter up to mm
72
Core diameter mm
25,4
Ribbon length variable up to m
360
Width mm
50 – 114
Printer dim.
Höhe x Tiefe x Breite mm
189 x 322 x 253
245 x 412 x 264
Weight kg
4
5
Label sensor
Gap sensor
for leading edge of the label or punching marks and end of material
Reflective sensor from the bottom
for printing marks
Distance from the center to the left mm
0 – 58
Electronics
Processor high speed 32 Bit clock rate MHz
400
RAM MB
64
Memory IFFS MB Flash
16
Battery buffer for
Real-time clock, printout of time and date,
data storage on shut-down
Warning signal
Acoustic signal in case of error
Interfaces
RS232C 1.200 up to 230.400 Baud/8Bit
USB 2.0 full speed slave for PC connection
Ethernet 10/100 Base T, LPD, RawIP-Printing,
ftp-Printing, DHCP, HTTP, FTP, SMTP, SNMP,
TIME, Zeroconf, mDNS, SOAP
Nano Bluetooth USB Adapter V2.1
WLAN USB Stick 54 Mbps
Nano Bluetooth USB Adapter V2.1
2 x USB Master for
keyboard, scanner, memory stick or service key
Operating data Power supply
100 – 240 V ~ 50 / 60 Hz, PFC
Energy consumption
Power saving mode 1,8 W / typic 45 W / max. 100 W
Temperature / Humidity:
Operation
+5 – 40°C / 10 – 85% not condensing
Storage
+0 – 60°C / 20 – 80% not condensing
Transport
–25 – 60°C / 20 – 80% not condensing
Approvals
CE, FCC class A, CB, CCC, UL
Operation panel Touchscreen display
160 x 255 pixels with backlight
Diagonal measurement mm
96
Operating functions
Pause, Feed, Cancel, Menu, Enter, numeric pad
Settings
Time, Date, Digital or analog clock
25 language settings, System settings
Print parameters, Interfaces, Security
1) All material details are approximate values. Small labels, very thin, narrow, thick or stiff materials
as well as labels with strong adhesives must be tested.
CAB Label Printer
Label printer A2+ A4+ with dispense function
A2+ The Small Sized.
A4+ The All-rounder.
The A+ series is ideal for solving practically any marking task. With a broad range of peripherals,
accessories and software, our printers can be adapted to meet any requirements. We offer various
sensors and adapters for label dispensing solutions.
During development, we focused first and foremost on simple and convenient operation coupled
with high reliability. The printing units and housing are made of high-quality materials and are
perfectly matched.
The A+ series is always a safe option, because it offers almost unlimited possibilities, be it for standalone operation in conjunction with PC/label software or for network operation linked with SAP.
There’s a good reason why our A+ label printer has a reputation as an all-rounder!
Technical data
Standard
A2+
Label printer
Printhead
Material
Ribbon
Printer
dimensions
Electronics
Interfaces
Printing method
Print resolution dpi
Print speed up to mm/s
Print width up to mm
External diameter up to mm
Label width mm
Label height from mm
Label height up to mm
Color page
Variable length up to m
Height x Depth mm
Width mm
Processor speed MHz
(RAM) MB
Memory IFFS MB Flash
Slot for CF card type I
Slot for wireless LAN card
Battery buffer for
Option
A4+
Thermal transfer/Thermal direct
300 / 600
203 / 300 / 600
150 / 100
250 / 250 / 100
54,2 / 57
104 / 105,6 / 105,6
205
205
4 – 63
20 – 116
4/4
4/4/4
5000 / 2000
5000 / 4000 / 1000
outside or inside
500
274 x 446
190
242
266
64
8
Warning signal
Centronics bidirectional
in accordance with IEEE 1284
RS232 C
USB 2.0 High Speed Slave für PC
Ethernet 10/100 Base T
RS422, RS485
Peripheral connection
WLAN card 802.11 b/g
2x USB masters for
real-time clock, printout of time and date
Data storage on shut-down
Acoustic signal in case of error
external operation panel, keyboard, scanner, service key
Technical details
1
2
7
1
2
7
3
9
3
4
8
4
8
5
6
9
5
6
A2+ The Small Sized.
A4+ The All-rounder.
1 Big graphic display 2 Ribbon holder 3 Straightforward adjustment 4 Peel-off option 5 Peripheral connection
6 Solid metal housing 7 Roll holder 8 Internal rewinder 9 One tool for all maintenance tasks
CAB Label Printer
Label printer A6+ A8+ with dispense function
A6+ The Broad.
A8+ The Extra Broad.
The wide variety of the A+ series matches its versatility in operation. The A+ label printer is available
in print widths ranging from 54.2 mm to 216 mm. This enables the production of extremely narrow
and very wide labels with an excellent print resolution of between 200 and 600 dpi.
The print speed ranges from 100 to 250 mm/s depending on the model you choose, ensuring faster
throughput times and thus lower process costs!
Technical data
Standard
A6+
Label printer
Printhead
Material
Ribbon
Printer
dimensions
Electronics
Interfaces
Printing method
Print resolution dpi
Print speed up to mm/s
Print width up to mm
External diameter up to mm
Label width mm
Label height from mm
Label height up to mm
Color page
Variable length up to m
Height x Depth mm
Width mm
Processor speed MHz
(RAM) MB
Printer memory IFFS MB Flash
Slot for CF card type I
Slot for wireless LAN card
Battery buffer for
Warning signal
Centronics bidirektional nach
IEEE 1284
RS232 C
USB 2.0 High Speed Slave für PC
Ethernet 10/100 Base T
RS422, RS485
Peripheral connection
WLAN card 802.11 b/g
2x USB masters for
Option
A8+
Thermal transfer/Thermal direct
203 / 300
300
200 / 200
150
168 / 162,6
216
205
205
50 – 176
50 – 220
6/6
10
4000 / 3000
2000
outside or inside
500
360
274 x 446
302
352
266
64
8
real-time clock, printout of time and date
Data storage on shut-down
Acoustic signal in case of error
external operation panel, keyboard, scanner, service key
Technical details
1
2
1
2
6
3
4
5
6
3
8
7
9
A6+ The Broad.
4
5
7
A8+ Der Extra Broad.
1 Big graphic display 2 Ribbon holder 3 Straightforward adjustment 4 Peripheral connection 5 Solid metal
housing 6 Roll holder 7 one tool for all maintenance tasks 8 Internal rewinder 9 Peel-off option
CAB Label Printer
Label printer A4+M with centered material guide.
A4+M With centered material guide.
The A4+M does not require any printhead adjustments for different material widths. It can also be used
for printing very narrow or thick endless materials.
The gap height for flat tubes and synthetic straps is 4 mm.The optimum print speed for materials that
are difficult to imprint is 30-125 mm/s. Operation and software are compatible with the A+ series.
Technical data
Standard
A4+M
Label printer
Printhead
Material
Ribbon
Printer
dimensions
Electronics
Interfaces
Option
Printing method
Print resolution dpi
Print speed up to mm/s
Print width up to mm
External diameter up to mm
Label width mm
Label height mm
Variable length up to m
Height x Depth mm
Width mm
Processor speed MHz
(RAM) MB
Memory IFFS MB Flash
Slot for CF card type I
Slot for wireless LAN card
Battery buffer for
Warning signal
Centronics bidirectional
in accordance with IEEE 1284
RS232 C
USB 2.0 High Speed Slave for PC
Ethernet 10/100 Base T
RS422, RS485
Peripheral connection
WLAN card 802.11 b/g
2x USB masters for
Thermal/Thermal transfer
300
125
105,6
600
100
105,6
205
4 - 106
5 - 4000
5 - 1000
500
274 x 446
242
266
64
8
real-time clock, printout of time and date
Data storage on shut-down
Acoustic signal in case of error
external operation panel, keyboard, scanner, service key
Technical details
1
2
7
3
4
5
6
8
A4+M With centered material guide.
1 Big graphic display 2 Ribbon holder 3 Straightforward adjustment 4 Peel-off option 5 Peripheral connection
6 Solid metal housing 7 Roll holder 8 One tool for all maintenance tasks
CAB Label Printer
Label printer MACH4
MACH4 The Business Class.
MACH4 breaks new grounds. High-quality, robust synthetics provide a new look that delivers
reliable technology. It offers top performance and first-rate print quality.
Our main focus during the development of this printer was easy handling and a high degree of
reliability: the centered material feed, for example, eliminates the need for adjustments when
the material is changed.
Technical data
Standard
Label printer
Printhead
Material
Ribbon
Printer dim.
Electronics
Interfaces
Option
MACH4
Printing method
Print resolution dpi
Print speed up to mm/s
Print width up to mm
External diameter up to mm
Label width mm
Label height mm
Color page
Variable length up to m
Height x Depth x Width mm
Processor speed MHz
(RAM) MB
Printer memory IFFS MB Flash
Slot for CF card type I
Slot for wireless LAN card
Battery buffer for
Warning signal
Centronics bidirectional
in accordance with IEEE 1284
RS232 C
USB 2.0 High Speed Slave for PC
Ethernet 10/100 Base T
WLAN card 802.11 b/g
2x USB masters for
Thermal/Thermal transfer
203
300
600
200
200
100
104
105,6
105,6
205
6 - 116
5 - 4500
outside or inside
360
312 x 435 x 240
266
64
8
real-time clock, printout of time and date
Data storage on shut-down
Acoustic signal in case of error
external operation panel, keyboard, scanner, service key
Technical details
1
2
4
3
5
6
8
10
7
9
MACH4 The Business Class.
1 Cover with large window 2 Media hub 3 Ribbon retainer 4 Print mechanism 5 Printing with 203,
300 or 600 dpi 6 Gap sensor 7 Label guide 8 Reflex sensor 9 Drive roller 10 Peel-off plate
CAB Label Printer
Label printer PX4/PX6
PX4/PX6 The Executive Class.
Printing and labeling in every position and in every direction – printers in the PX series can be
integrated in all existing labeling systems. The models work in every mounting position.
With their consistently robust design, they can satisfy every industrial requirement and are absolutely
reliable. The devices are easy to handle and all wear parts can be replaced quickly and easily.
Technical data
Standard
Label printer
Printhead
Material
Ribbon
Printer
dimensions
Electronics
Interfaces
PX4
Printing method
Print resolution dpi
Print speed up to mm/s
Print width up to mm
Label width mm
Label height mm
Variable length up to m
Height x Depth mm
Width mm
Processor speed MHz
(RAM) MB
Memory IFFS MB Flash
Slot for CF card type I
Slot for wireless LAN card
Battery buffer for
Option
PX6
Thermal transfer/Thermal direct
203 / 300 / 600
203 / 300
300 / 250 / 100
200 / 200
104 / 105,6 / 105,6
168 / 162,5
10 – 116
50 – 176
6-5000 / 6-4000 / 6-1000
12-4000 / 12-3000
600
300 x 333
300 x 393
245
266
64
8
Warning signal
Centronics bidirectional
in accordance with IEEE 1284
RS232 C
USB 2.0 High Speed Slave for PC
Ethernet 10/100 Base T
WLAN card 802.11 b/g
2x USB masters for
real-time clock, printout of time and date
Data storage on shut-down
Acoustic signal in case of error
external operation panel, keyboard, scanner, service key
Technical details
4
6
3
2
5
1
7
12
8 +13
14
9
10
11
PX4/PX6 The Executive Class.
1 Big graphic display 2 Navigator pad 3 CF memory card 4 USB slot 5 Power switch 6 Solid metal cover
7 Ribbon rewinder and unwinder 8 Ribbon saver 9 Back-feed 10 Label sensor 11 Simple material replacement
12 Adjustment of the print layout 13 Fast printhead exchange 14 Removing the print roller
CAB Label Printer XC
XC4 - XC6 for two-color printing
New opportunities in the labelling sector emerge with our new XC-series – two successively arranged
thermal transfer printing units permit simultaneous printing of two colors in one document. The first
printing unit is additionally equipped with a ribbon saver. The XC4 and XC6 comply with all requirements of the new classification and labelling obligations for chemicals according to GHS.
The new XC series has a solid metal cover made of dye-cast aluminium and are are applicable for big
media rolls up to 300mm diameter.
Technical data
Standard
Label printer
Printhead
XC4
Option
XC6
Printing method
Thermal transfer
Print resolution dpi
300
300
Print speed up to mm / s
30, 40, 50, 75, 100, 125
30, 40, 50, 75, 100, 125
Print width up to mm
105,6
162,6
Material
Labels, continuous rolls or fan-folded
Paper,cardboard,textiles; textiles PET, PE, PP, PVC, PU, Acrylat, PI
Thickness mm / weight g / m2
0,05 – 0,8 / 60 – 180
Height:Etiketten mm
20 – 116
50 – 176
Of liner or continuous material mm
25 – 120
50 – 180
Label height1) mm
20 – 2000
20 – 1500
Media roll: Total diameter up to mm
300
Core diameter mm
76
Winding direction
Outside or inside
Ribbon
Ink
Outside or inside
Roll diameter up to mm
72
Core diameter mm
25,4
Ribbon length variable up to m
360
Width2) up to mm
25 – 114
55 – 165
Saver printhead 1
Dimensions
Height x Depth x Width mm
395 x 554 x 248
395 x 554 x 358
Weight kg
22
24
Label sensor
Gap sensor
Forleadingedge of thelabelor punching marks and endof material
Reflective sensor from the botton
For printing marks
Distance to leading edge mm
5 – 53
Electronics
ProcessorHighSpeed32Bit ColdFire/clockrate MHz
266
RAM MB
64
Memory IFFS MB Flash
8
Slot for CompactFlash Type I memory card
Slot for wireless LAN card
Battery buffer for
Real-time clock, printout of time and date
Data storage on shut-down
Warning signal
Acoustic signal in case of error
Interfaces
USB 2.0 High Speed Slave for PC-connection
Ethernet 10/100 Base T, LPD, RawIP-Printing,
ftp-Printing, DHCP, HTTP, FTP, SMTP, SNMP,
TIME, Zeroconf, mDNS, SOAP
Peripheral connection
WLAN card 802.11 b/g WEP / WPA PSK (TKIP)
2 x USB master for
Forextern. operation panel, keyb., scanner, serv.key, USB flash drive
Operating data Power supply
100 – 240 V ~ 50 / 60 Hz, PFC
Power consumption
max. 300 W
Temperature / Humidity:
Operation
+5 – 40°C / 10 – 85% not condensing
Storage
+0 – 60°C / 20 – 85% not condensing
Transport
–25 – 60°C / 20 – 85% not condensing
Approvals
CE, in preparation FCC class A, CB, CCC, UL
Operation panel Buttons/LED display
Pause, Feed, Cancel, Menu, Enter, 4 x Cursor
LCD graphic display
Width 60 mm, height 40 mm, text 4 lines, ca. 20 characters per line
Settings
Time, date, digital or analog clock
25 language settings
System settings, print parameters, interfaces, security
1) Limitations may apply to small labels, thin materials or strong adhesives.
Critical materials or applications must be tested and approved.
2) The ribbon should be roughly the same width as the label in order to avoid folding.
Standard
Label printer
Monitoring
Test routines
Fonts
Graphics
Barcodes
Software
Option
Authorized distribution by resellers
XC4 und XC6
Stop printing if:
On the display
End of ribbon, End of labels, Printhead open
Data reception Used memory,Clock Input buffer,WLAN fieldintensity,Temp. of printhead,
Date sheet,Remaining quantity of ribbon,Ethernet status,Access to mem. card,abc Debug
System diagnosis
When switched on, incl. printhead testing
Short status,
Font list, device list, WLAN status, profile of label, test grid,
status print
monitor mode, PPP status
Status reports
Extensive status printout with information about settings, e.g. print length counter,
runtime counter, etc. Request of machine status via software command. Detailed
status messages on the display, e.g. network error – no link, barcode error, etc.
Font types
5 Bitmap fonts incl. OCR-A, OCR-B and 3 Vector fonts Swiss 721, Swiss 721 Bold
and Monospace 821 available internally, loadable TrueType fonts. Thai and Chinese
(simplified Chinese) available as options.(simplified Chinese) Optional Thai
Character sets
Windows 1250 up to 1257, DOS 437, 737, 775, 850, 852, 857, 862, 864, 866,
869, EBC DIC 500, ISO 8859-1 up to -10 and -13 up to -16, WinOEM 720, UTF-8,
Macintosh Roman, DEC MCS, K0I8-R.
All West and East European Latin, Cyrillic, Greek, Hebrew and Arabic characters
are supported. Thai and Chinese available as options
Bitmap fonts
Size of width and height 1 – 3 mm
Zoom 2-10
Orientation 0°, 90°, 180°, 270°
Vektor-/TrueType-fonts Size of width and height 0.9 – 128 mm
Variable zoom, Orientation 360° in steps of 1°
Font formats
Bold, italic, underlined, outline, negative, gray, vertical, depending on character fonts
Font width
Variable
Graphic elements
Line, arrow, box, circle, ellipse, filled and filled with fading
Graphic formats
PCX, IMG, BMP, TIF, MAC, GIF, PNG
Linear barcodes
Code 39, Code 93
Interleaved 2 / 5
Code 39 Full ASCII
Ident- and lead code of Deutsche Post AG
Code 128 A, B, C
Codabar
EAN 8, 13
JAN 8, 13
EAN / UCC 128
MSI
EAN / UPC Appendix 2
Plessey
EAN / UPC Appendix 5
Postnet
FIM
RSS 14
HIBC
UPC A, E, E0
2D-Codes
Aztec, Codablock F, Data Matrix, PDF 417, Micro PDF 417, UPS Maxicode, QRCode, RSS 14 truncated, limited, stacked and stacked omnidirectional,
EAN-Datamatrix, GS1 Data Bar
All codesvariable inheight,module width and ratio.Orientation 0°, 90°, 180°, 270°. Optionally with check digit, printed characters and start/stop code, depending on code type.
Programming
J-Script direct programming
abc-Basic Compiler
Database Connector
System diagnosis /
Printer monitoring
administration
Network Manager
Label software
cablabel R2+
Windows driver
certified
Stand-alone operation
Labels Platform 3, Codesoft, NiceLabel, Easylabel
Bartender, Label Matrix, Labelview
32 / 64 bit for:
Windows 2000, Server 2003, Windows XP, Server
2008, Windows Vista, Server 2008 R2, Windows 7
Technical details
For two-color printing
•
•
•
•
Two inline thermal transfer printing units for simultaneous printing of two colors in one document.
Stable metal housing made of die-cast aluminum.
The first printing unit is also equipped with a
ribbon saver.
For big media rolls up to 300 mm in diameter.
•
•
The XC series meets the requirements of the new
classification and labeling system for chemicals
according to GHS.
Both printing units with ribbon holders, operation
panel and electronic system are currently employed
in our successful A+ series industrial printers.
1
2
6
3
4
7
5
1 Big graphic display
White backlight for optimum readability.
2 Ribbon retainer
Three-part tightening axles enable quick and easy
ribbon exchange.
3 Straightforward adjustment
The printheads are pressed down with sliding toggles. One is mounted to the left label margin, the
other is pushed to the right label margin.
4 Peripheral connection
All additional modules such as the stacker and cutter are easily adjustable. All peripheral devices can
be connected to the printer with two pins and fixed
in place with one screw in a matter of seconds.
5 Stable metal housing
Made of die-cast aluminum. All components are
mounted on it.
6 Roll holder
The swing lever and integrated brake ensure that
the labels are unwound with constant tension.
7 Ribbon saver for printhead 1
Used for labels that are only to be partially printed
in secondcolor. In the unprinted area, the printhead
is lifted and the ribbon stopped while the label is fed.
CAB Label Printer
Label printer XD4M
XD4M With centred material guide.
With two stacked print mechanisms the XD4M can print both sides of paper, cardboard, textiles,
plastics or even flat synthetic tubes at the same time.
It is not necessary to adjust the printhead for different material widths. The printer is especially
suitable for printing on narrow and/or thick materials as well as on flat-pressed endless tubes and
difficult printable surfaces.
Technical data
Standard
Label printer
Printhead
Material
Ribbon
Printer
dimensions
Electronics
Interfaces
Option
XD4M
Printing method
Print resolution dpi
Print speed up to mm/s
Print width up to mm
External diameter up to mm
Width of carrier tape or
endless material mm
Height of carrier tape or
endless material up to mm
Variable length up to m
Height x Depth mm
Width mm
Processor speed MHz
(RAM) MB
Memory IFFS MB Flash
Slot for CF card type I
Slot for wireless LAN card
Battery buffer for
Warning signal
USB 2.0 High Speed Slave für PC
Ethernet 10/100 Base T
Peripheral connection
WLAN card 802.11 b/g
2x USB masters for
Thermal transfer
300
125
105,6
300
10 - 110
2000
360
395 x 554
248
266
64
8
real-time clock, printout of time and date
Data storage on shut-down
Acoustic signal in case of error
external operation panel, keyboard, scanner, service key
Technical details
1
2
3
4
8
5
7
6
XD4M With centred material guide.
1 Big graphic display 2 Ribbon holder 3 Straightforward adjustment 4 Material guide 5 Peripheral connection
6 Solid metal housing 7 Roll holder 8 One tool for all maintenance tasks
Product profile
PM43
PM43c
Mid-Range Industrial
Label Printers
PM43/PM43c mid-range industrial printers
are ideal for a wide range of applications
within the distribution center/warehouse
and manufacturing environments.
The Intermec PM43 and more compact PM43c
mid-range industrial label printers deliver fast,
drop-in deployment, advanced connectivity
and proven reliability to maximimze uptime.
Ready – Fastest to deploy.
Seamlessly fits any environment.
• Large color multi-lingual tamper proof touch-screen or icon user interface
• No touch configuration capabilities
• Only CCX & WiFi certified fixed printers with standard IPv6 implementation
Ready
PM43/PM43c are ready to deliver maximum
uptime. Both models are available with either
a tamper-proof color touch-screen in 10
languages or a universal icon interface. Reduce
your total workforce training and device
support needs with immediate notifications
via the printer and the elimination of
reconfiguration due to UI tampering.
Reliable – Maximize uptime. Built
from 40 years of printing innovations.
3rd generation platform.
• Precision Print for consistent bar
code printing with pin point accuracy
• Multilingual Web page loaded on every
printer ensure easy device monitoring
• Strong metal structure with metal door
that can be locked for media protection
Perform – Increase productivity and
process efficiencies. Simple to use.
• Fastest throughput in its class
• Powerful programmable capability with ability to directly connect peripherals
• Most connectivity options in the market
Experience the fastest deployment time in
the market with Intermec’s innovative ‘NoTouch’ configuration via an optional embedded
RFID chip. This patented capability means
PM43/PM43c can be programmed without
having to open the printer box or power it up,
translating into significant savings for you.
As the industry’s only printers available with
WiFi- and CCX-Certification with additional
BT connectivity, PM43 and PM43c help
maintain wireless network integrity. Every
printer ships with Ethernet connectivity,
as well as with network protocol IPv6,
ensuring long-term, enterprise scalability.
Reliable
As the 3rd generation of Intermec
industrial printers, the rugged PM43/
PM43c incorporate features that increase
uptime and reduce maintenance costs.
Strong all-metal construction is perfect
for harsh industrial environments and the
metal media door with innovative latch
system ensures media is protected.
Increase efficiencies through the
prevention of frequent media adjustments
with Precision Print. Now you can print
small barcodes, text and images with
pinpoint accuracy – every time.
Device monitoring has never been easier.
Every PM43/PM43c has a web page loaded
in the printer that allows for easy setup,
monitoring and configuration through
handheld devices like Intermec’s hand
held computers, tablets or smart phones.
Integrated device management and diagnostic
capabilities, provided through Intermec
SmartSystems™ and Wavelink Avalanche™,
reduce downtime and simplify deployment.
Perform
PM43/PM43c are ready to perform. With
the Fastest Print Speed in its class of 12ips,
you’ll gain a clear productivity advantage.
PM43/PM43c are the smartest printers
around helping to reduce labeling errors and
increase process efficiencies. Printer standalone applications, developed through the
embedded programming language, directly
control other devices such as Scanners, Scales,
keyboards and other peripherals helping you
decrease infrastructure costs and complexity.
With its user-selectable, all-in-one
programming languages, PM43/PM43c
fit IT infrastructures, deploying with
drop-in simplicity to Intermec or
mixed printer environments.
PM43/PM43c are co-engineered and tested
with Intermec Media Products, ensuring
optimized printhead performance when
used with genuine Intermec media.
Intermec Lifecycle Services –
Delivering Business Continuity
Intermec lifecycle services provide customers
and partners with best-in-class support,
education, managed and advanced services.
For your support plan needs, our Intermec
Medallion® Services programs deliver the
highest levels of productivity, device reliability,
and uptime. The Medallion® Complete support
package covers hardware failure, general wear
and tear and accidental damage. Find out more
about Intermec’s lifecycle services solutions at
http://www.intermec.com/services. Description
Industrial Mid Range, Direct Thermal and
Thermal Transfer label, ticket and tag
printer. Also available with RFID.
Physical Characteristics
PM43: LxHxW: 483.54 x 294.61 x 284.2 mm
(19.04 x11.6 x 11.19 in)
Weight: 15.82 kg (34.88 lbs.)
PM43C: LxHxW: 431.84 x 181 x 252.5 mm
(17 x7.13x 9.94 in)
Weight: 12.5 kg (27.65 lbs.)
PM43C with Dome Door:
LXHXW: 500.22X244.87X252.5 mm
(19.04X9.64X9.94 in)
Weight: 12.71Kg (28.02 lbs.)
Print Specifications
Max. Width with 203dpi: 108 mm (4.25 in)
Max. Width with 300 dpi: 106 mm (4.17 in)
Max. Width with 406 dpi: 104 mm (4.09 in)
Max. Length: depending on with 203 dpi –
406 dpi: (1.2 m) 48 in to (4.8 m) 191 in
RFID Standards & Frequencies
18000-6C / EPC Class 1 Generation 2
865-928 MHz radio configured to comply
with local UHF RFID regulations including
FCC and ETSI. Contact local representative
for availability in particular regions.
Print Speed
100 – 300 mm/s (4 – 12 ips) variable (203/300 dpi)
100 – 250 mm/s (4 – 10 ips) variable (406 dpi)
Print Resolution
8 dots/mm (203 dpi)
11.8 dots/mm (300 dpi)
16 dots/mm (406 dpi)
Media
Type: Labels and Tags, Linerless and Linered media
Max/Min Width: 114.3 /19.05 mm (4.5 /0.75 in)
Thickness: 3 to 10.4 mil
North America
Corporate Headquarters
6001 36th Avenue West
Everett, Washington 98203
Phone: (425) 348-2600
Fax: (425) 355-9551
North Latin America
Headquarters Office
Mexico
Phone: +52 55 52-41-48-00
Fax: +52 55 52-11-81-21
Configuration: Roll-fed or fanfold
Sensing: Gap, notch, black mark, continuous
Label Roll Max Diameter: 212.75 mm (8.375 in)
Label Roll Core: 38-76 mm (1.5-3 in)
Type: Ribbons
Roll Max Diameter: 80 mm (3.15 in), approx. 450m
Core ID: 25.4 mm (1 in)
Type: Wax, mid-range, resin
Genuine Intermec Media: www.intermec.com/media
Interfaces
Standard:
• Ethernet 10/100 Mbps
• RS-232, up to 115.2 kB/s
Supported Serial Protocols:
• Fingerprint/Direct Protocol: XON/XOFF,
ENQ/ACK, DSR/DTR, RTS/CTS
• IPL: XON/XOFF, Intermec Std. Protocol
• USB 2.0
• USB Host/Boot (X1 on PM43C, X2 on PM43)
Optional:
• Parallel IEEE 1284
• Industrial Interface (8 digital in/out, 4 analog
relays, 1 RS232/422/485 port)
• Dual Serial ports RS-232, RS-422, RS-485 and
20mA Current Loop
• Dual USB Host/Boot
Wireless:
• IEEE 802.11 b/g/n + Bluetooth
• Wi-Fi Certified, CCX (Cisco®) version 4 Certified
• Static WEP (64 bit and 128 bit), Dynamic WEP
(TLS, TTLS, PEAP, LEAP, EAP-FAST), WPA
(THIP/CCKM Personal and Enterprise, WPA2
(AES-CCMP/CCKM Personal and Enterprise)
• Multiple industrial antenna options for maximized coverage
Supported Protocols:
TCP/IP-suite (TCP, UDP, ICMP, IGMP, etc.),
LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv1/2c/3,
(SMTP.SNMP-MIBII supported – over UDP/IP –
private enterprise MIB included)
• Supports IPv4 and IPv6
• No touch configuration capability through imbedded RFID chip
Software
Printer Command Languages:
• IPL
• Fingerprint/Direct Protocol
• ZSim (ZPL)
• DSim (DPL)
• Web Page configuration interface
• XML enabled for SAP® AII and Oracle® WMS
Applications / Drivers:
• InterDriver™ Windows printer driver
• Intermec label design and print package
• PrintSet for printer configuration
Development Software:
• Intermec Fingerprint Application Builder™ (IFAB)
(RFID libraries included)
South Latin America
Headquarters Office
Brazil
Phone: +55 11 3711-6776
Fax: +55 11 5502-6780
Asia Pacific
Headquarters Office
Singapore
Phone: +65 6303 2100
Fax: +65 6303 2199
OEM Sales
Phone: (425) 348-2762
Europe/Middle East &
Africa Headquarters Office
Reading, United Kingdom
Phone: +44 118 923 0800
Fax: +44 118 923 0801
Internet
www.intermec.com
Worldwide Locations:
www.intermec.com/locations
Customer Service
and Support
Toll Free NA: (800) 755-5505
Toll in NA: (425) 356-1799
Sales
Toll Free NA: (800) 934-3163
Toll in NA: (425) 348-2726
Freephone ROW:
00 800 4488 8844
Toll ROW: +44 134 435 0296
Device Management Support:
• SmartSystems™
• Wavelink Avalanche™
Bar Code Symbologies
All major 1D and 2D symbologies are supported.
Standards Supported
UPC/EAN Shipping Container; UCC/EAN 128
Serial Shipping Container; MH10.8 Shipping
Label; AIAG (shipping parts label); OGMARS;
POSTNET; HIBCC; ISBT 128; GM1724; UPS
shipping label; Global Transport Label
Fonts
Monotype font engine
Non-Latin fonts available through WTLE
Graphics
Supports PCX, PNG, GIF and BMP file formats.
Other formats supported with Label Generation Tools.
Memory
Standard: 128MB Flash memory, 128MB SDRAM,
Multi-GB USB memory device (FAT16/FAT32
USB drivers supported)
User Interface
Color touch User Interface
Icon User Interface
User Interface Languages
Color Touch interface and Web Page support
English, Russian, German, French, Portuguese,
Spanish, Italian, Korean, Simplified
and Traditional Chinese
Power Supply
AC Voltage: 100 to 240 VAC, 45 to 65Hz
PFC Regulation: IEC320/C14
Power Consumption: Standby 9W; Peak 300W
Operating Environment
Ambient Operating Temperature:
+5°C to +40°C (+41°F to +104°F)
Storage Temperature: -20°C to +70°C (-4°F to +152°F)
Humidity: 20 to 80% non-condensing
Regulatory Approvals
RoHS compliant, CE (EN55022 Class A), FCC Class A,
UL/cUL, C-Tick, Energy STAR certified, D Mark and CCC
Options and Accessories
RFID UHF, integral self-strip unit with liner takeup,
Label Taken Sensor (LTS), Full Batch Label/Liner
Rewinder, parallel interface board, additional serial
interface boards*, industrial interface boards*, real
time clock, media supply hub, Collapsible Ribbon core
cutter, Media low sensor, Linerless
*Not applicable when using IPL firmware
Media Sales
Phone: (513) 874-5882
Copyright © 2012 Intermec Technologies Corporation.
All rights reserved. Intermec is a registered trademark of
Intermec Technologies Corporation. All other trademarks
are the property of their respective owners.
612178-03/12
In a continuing effort to improve our products, Intermec
Technologies Corporation reserves the right to change
specifications and features without prior notice.
Product profile
PC23d
PC43d
PC43t
Desktop Printers
The PC23/43 family is a purpose-built
platform with innovative design guided
from customer input. Tailored designs
include transportation/courier, healthcare,
retail and hospitality markets, as well as
small and medium business manufacturing,
warehouse and office environments.
Intuitive – Super Easy to Install & Use
• 10-language LCD or Icon graphics
user interface maximizes uptime
• One hand media loading for
trouble-free use
• Fastest throughput in its class at 8 ips
• Quick configuration with USB stick device
Flexible – Fits your business
needs today & tomorrow
• User installable connectivity upgrades
and accessories for scalability
• Leading command languages for
seamless deployment
• Modular IT-friendly design speeds
up deployment and support
Smart – Keeps you informed & productive
• Remote status updates with Intermec tools minimize downtime
• Programmable with ability to directly add keyboard or scale improves efficiency
Designed to set a new standard in user
friendliness and flexibility, the compact
Intermec PC23/PC43 provides an intuitive
label printing solution. Available in 2”
wide direct thermal (PC23d) and 4”
direct thermal (PC43d) or 4” thermal
transfer (PC43t), the PC series is perfect
for space-constrained settings. Its
low cost and fast operation make the
PC series the smart choice for light
duty labeling applications where users
need reliable, easy to use printers.
Super Easy to install and use
Ideal for customers who are new to
label printing or who are making the
switch from laser or inkjet printers, the
easy-to-use PC23 and PC43 desktop
printers feature a double-wall clamshell
construction for long term durability.
The PC series was designed by users for
quick set-up and trouble-free use. With
the most placement options including
wall mount and battery power, the printer
adapts to its environment and fits right in.
No longer are users required to decode a
blinking LED to determine printer status.
The PC series comes with either a universal
Icon interface or color LCD in 10 languages
for immediate notifications reducing
training and support needs. Configure and
update the PC printer on the spot with
USB host port – no computer necessary.
One-hand drop-in media loading (and
reloading) makes it highly intuitive. Best of
all,the disinfectant resistant case means
it’s made to last in your environment.
The PC43t thermal transfer printer
takes both a half-inch or one-inch ribbon
core in every printer. The one-inch core
accommodates the largest ribbon roll
(up to 11,811 inches / 300m) in a desktop
printer reducing the need for frequent
replacements helping to maximize uptime.
Off-the-shelf compatibility and
certifications with a wide range of business
and healthcare software applications
enables users to be up and running
quickly, requiring minimal IT support.
With a fast throughput at 8 ips, you
can count on the PC series to deliver
a productivity advantage for your
labeling needs.
From a migration standpoint, the compact
size, common media specifications, and
multi-printer language platform of the PC
series results in an easy path from legacy
Intermec printers such as the PC4, PC41 and
PF8, as well as from other desktop printers.
Fits your business needs
today and tomorrow
No other desktop barcode printer offers
more user-installable options ensuring
your printer will grow as your business
grows. Modular connectivity ensures
the PC series will fit into your existing
network environment. USB comes
standard along with optional, user
installable serial, parallel, secure Ethernet
and dual wireless card with Bluetooth®
and CCX-compliant 802.11 b/g/n. Leveraging the Intermec platform provides
a solution that can adapt and grow as
needs change – even upgrade seamlessly
to Intermec industrial printers. This
integrated approach provides significant
efficiencies in development, deployment
and support. The PC desktop printer
series can host stand-alone applications
developed through Intermec Fingerprint
programming to address custom
requirements today or in the future,
without the need to upgrade hardware.
The ability to use any Intermec printer
language and emulate other nonIntermec printer protocols makes the PC
series a cost-effective “drop-in” printer
replacement in almost any environment.
There’s no need to replace the printer if
you upgrade your software environment –
the printer will easily adapt. The PC series
keeps your options open protecting
your investment for the long term.
Keeps you informed and productive
The PC series offers many Smart
features normally found only in industrial
grade printers. By adding Intermec’s
SmartSystems® and XMLLabel™, the
PC series will be fully provisioned for
remote management and XML printing
environments. Furthermore Intermec
SmartSystems provides remote monitoring
and diagnostics to networked devices
for quick maintenance, and upgrades.
Support for Monotype fonts come standard
helping to speed up configuration – all
at an affordable and competitive price.
Physical Description
The compact PC series includes both Direct Thermal
(PC23d & PC43d) or Thermal Transfer (PC43t) printers
designed for self-adhesive labels, nonadhesive tags,
linerless, floodcoat, or continuous paper strip roll.
Print Resolution: 8 dots/mm (203 dpi)
or 12 dots/mm (300 dpi)
Print Width:
PC43: 203 dpi - max. 104 mm (4.1 in);
300 dpi - max. 106 mm (4.2 in)
PC23d: 203 dpi – max. 56 mm (2.2 in);
300 dpi – max. 54 mm (2.1 in)
Printing Speed:
Selectable up to 8 ips (203.2 mm/sec) for 203 dpi;
6 ips (152.4 mm/sec) for 300dpi
Software
Printer Command Languages:
IPL, Fingerprint, ZSim (ZPLII Simulation), ESim (EPL2
Simulation), DSim (DPL Simulation), XML enabled for
SAP® AII and Oracle® WMS
Applications/Drivers:
Interdriver™ Windows Printer Driver
Intermec Label design and print package
PrintSet for printer configuration, font and firmware
downloading tool
Media Specifications
Label Roll –
Maximum Diameter: 127 mm (5 in)
Core Diameter: Min. 25.4 mm (1 in)
Max. 38.1 mm (1.5 in)
Paper Width:
PC43: Max. 118 mm (4.7 in), Min. 19 mm (0.8 in)
PC23d: Max 60 mm (2.36 in), Min 15 mm (0.6 in)
Label Length: Min. 6 mm (0.3 in)
Labels: A wide selection of stock and custom size
labels are available from Intermec Media.
Ribbon Roll – PC43t accepts both 0.5” or 1.0” core
Core: 0.5” ID (12.7mm ID) or 1.0” ID (26 mm ID) with notches
Min width: 1.0” – ribbon only
Max width: 4.3”
Max. length:
0.5”: 3,588 in (91.1 m)
1.0”: 11,811 in (300 m)
Ribbons: A wide selection of widths and formulations
available.
Connect to Print™
The printer comes with all included: software,
drivers, USB cable, power adapter, power cord, and a
handy QuickGuide to facilitate getting started, and
a PrinterCompanion CD with label design program,
Windows™ driver, configuration software and
documentation.
Character Sets/Fonts
Printing
Standard: Monotype English and Latin, World Type
Layout Engine (WTLE), Cyrillic, Latin, Greek, Turkish,
Hebrew, Arabic, Baltic, Baltic RIM, Vietnamese,
Thai). Universal Font Scaling Technology (UFST) and
Standard Latin Fonts: Monotype Century Schoolbook,
CG Times, CG Times Bold, Letter Gothic, Andale Mono
(WGL4), Andale Mono Bold (WGL4), Univers 55,
Univers Bold 65, Univers Condensed Bold, Univers
Extra Condensed, OCR-A, OCR-B.
Optional: Downloading of additional fonts is also
possible.
LCD Display Language
Standard: English, French, German, Italian,
Portuguese, Russian, Spanish
Optional: Simplified Chinese, Traditional Chinese, Korean
Specifications by Model
Model
Overall Printer size
(With hinge and latch)
Height
Width
Depth
Weight
PC43d
4” DT
Icon/LCD
167 mm
(6.6 in)
180 mm
(7.1 in)
215 mm
(8.4 in)
1.72 kg
(3.80
lbs)
PC43t
4” TTR
Icon/LCD
182 mm
(7.2 in)
227 mm
(8.9 in)
210 mm
(8.3 in)
281 mm
(11.1 in)
2.70 kg
(5.95
lbs)
PC23d
2” DT
Icon/LCD
177 mm
(6.9 in)
125 mm
(4.9 in)
215 mm
(8.5 in)
1.45 kg
(3.20
lbs)
Print 203 dpi and 300 dpi standard
Real-time Clock: Standard (LCD)
Adjustable Gap Sensor (LCD)
Print Specifications
Maximum Label Width:
PC43: 118 mm (4.7 in); PC23d: 60 mm (2.4 in)
Maximum Label Length:
Standard: 203 dpi – 1727 mm (68 in)
300 dpi – 900 mm (35 in)
Print Direction: Prints text, bar codes and graphics
in all four directions
Intermec Delivers: Mobility
Lifecycle Solutions & Services
Intermec provides customers and
partners with best-in-class support,
education, managed and advanced
services. We deliver business optimization
throughout the product lifecycle.
To protect your printer investment,
Intermec Medallion® Support Services
deliver the highest levels of productivity,
device reliability, and uptime. With
Medallion support, you can choose from
either the Complete or Standard programs
to get the amount of coverage and
protection you need for your environment.
For more information about Intermec’s
lifecycle solutions and services, please visit
us at http://www.intermec.com/services
Graphics
Supports user-defined fonts and graphic formats
including BMP, GIF, PCX, and PNG.
Bar Code Symbologies
All major 1-dimensional bar code symbologies are
available, plus 2-dimensional and composite codes:
Aztec, Code 16K, Code 49, Data Matrix, Dot Code,
EAN-8, EAN-13, EAN.UCC 128, Grid Matrix, HIBC 39,
HIBC 128, MaxiCode, MSI (modified Plessey), PDF417,
Micro PDF417, Planet, Plessey, Postnet, QR-Code,
RSS-14 (variations)
Environment (printing): +5° to +40°C (+40° to +104°F)
Humidity (printing): 10–80% RH non-condensing
Materials: Disinfectant resistant plastic (PC23d, PC43d)
PC23d & PC43d case will not be damaged when
cleaned with the following chemicals:
The following is a list of chemical disinfectants and
cleaning solutions that have been successfully tested
on the PC23d and PC43d. Cleaning these printers
by using a wipe or cloth dampened by any of the
disinfectants or cleaning solutions below will not
cause damage to the printer case or media window.
Chemical Disinfectants
Viraguard®
Sodium Hypochlorite 6%
Ammonium Chloride 10%
SANI-CLOTH HB
SANI-CLOTH PLUS
SUPER SANI-CLOTH
Cavi Wipes
Super HDQL 10
Cloro-Wipe Towelette
Virex
70% Isopropyl Alcohol
Alcohol Prep Pads
Ethylene Glycol
Brand
Veridien
Multiple suppliers
Multiple suppliers
PDI
PDI
PDI
Metrex
Spartan
Surgipath
Johnson
Multiple suppliers
PDI, others
Multiple Suppliers
CleanersBrand
Screen Cleaner
Multiple Suppliers
Tuffie Wipes
Vernacare
North America
Corporate Headquarters
6001 36th Avenue West
Everett, Washington 98203
Phone: (425) 348-2600
Fax: (425) 355-9551
North Latin America
Headquarters Office
Mexico
Phone: +52 55 52-41-48-00
Fax: +52 55 52-11-81-21
South Latin America
Headquarters Office
Brazil
Phone: +55 11 3711-6776
Fax: +55 11 5502-6780
Europe/Middle East &
Africa Headquarters Office
Reading, United Kingdom
Phone: +44 118 923 0800
Fax: +44 118 923 0801
Asia Pacific
Headquarters Office
Singapore
Phone: +65 6303 2100
Fax: +65 6303 2199
Power Adapter
Separate power supply –
Input: 100–240 V AC/50–60 Hz, 1.5 A
Output: 24 V DC, 2.5 A
Energy Star Compliant
Memory
Standard: 128 MB Flash, 128 MB RAM (DDR2)
Optional: Up to 32 GB via user USB thumbdrive
Interface
Standard: USB Device Type B connector v.2.0 high
speed, USB Host Type A connector v.2.0 high speed
Field Installable: Ethernet 10/100 Mbps module,
Dual radio module (802.11 b/g/n and Bluetooth® V2.1),
USB to Serial adapter (RS-232), USB to Parallel adapter
Protocol
Serial Flow Control: XON/XOFF, RTS/CTS
Wireless Prototocol: WEP static (64/128bits), WPA,
WPA2, WEP dynamic, EAP-PEAP, EAP-TTLS, LEAP,
EAP-FAST, EAP-TLS, CCX compliant level 3. Regulatory Approvals
CE, FCC Class A, cULus, UL, GS, TUVGS,
BSMI, D Mark, cUL, CCC (China), KCC
(South Korea), C-TICK (Australia/NZ)
Factory Installed Options
HF RFID (PC23d), UHF RFID (PC43)
User Installable Accessories/Upgrades
Dispenser with LTS, Cutter Unit with LTS (PC43d
& PC43t) user settable partial or full cut, Front
Label Tray (PC43d & PC43t), 300 dpi, Battery
Unit (PC43d), Linerless (PC43d & PC43t), Power
Adapter Tray (PC43d), Printer Case Lock
Internet
www.intermec.com
Worldwide Locations:
www.intermec.com/locations
Sales
Toll Free NA: (800) 934-3163
Toll in NA: (425) 348-2726
Freephone ROW:
00 800 4488 8844
Toll ROW: +44 134 435 0296
OEM Sales
Phone: (425) 348-2762
Service
No tools required to replace printhead and
platen roller, user accessible odometer
User Interface
Choice of:
• 2.36” VGA LCD 480 x 234 resolution in 10 languages, 8 buttons and ready-to-work LED
• Graphical back-lit Icons (cover open, paper out, ribbon out (PC43t), general error, maintenance, pause, thermal printhead too hot, data status, wireless status (if installed), Bluetooth® status
(if installed), ready-to-work LED and one
Print/Feed button
• User configurable audio sounds with volume levels.
Safety Approvals
North America: UL and cUL Listed, UL 60950-1
Europe: D Mark, EN 60950-1; CE marked
Mexico: NYCE Certified, NOM 19
Other Countries: IEC 60950-1
EMC Approvals
USA FCC Title 47, Part 15, Subpart A, Class B; Europe
EMC Directive (EN55022 Class B + EN55024) ; CISPR22
Warranty
One year; additional Medallion service packages
available
Media Sales
Phone: (513) 874-5882
Customer Service
and Support
Toll Free NA: (800) 755-5505
Toll in NA: (425) 356-1799
Copyright © 2012 Intermec Technologies Corporation.
All rights reserved. Intermec is a registered trademark of
Intermec Technologies Corporation. All other trademarks
are the property of their respective owners.
612165-03/12
In a continuing effort to improve our products, Intermec
Technologies Corporation reserves the right to change
specifications and features without prior notice.
Product profile
PD41/
PD42
Commercial Printers
• Strong metal construction for
demanding, medium-duty applications
• User friendly design with full
graphic display (PD42) or simple
one-button operation (PD41)
• Smart Printing capabilities support
stand-alone printer applications,
eliminating PC expense and complexity
• All-in-one, user-selectable printer
languages - Fingerprint/Direct
Protocol (DP), IPL, ZSim, DSim
and ESim - in every printer
• Secure wireless connectivity: CCX
and WiFi® certified with WPA2
• Integrated Ethernet, USB host and
device, and serial interface standard
• Internet Protocol v6 (IPv6) support
• Interchangeable print head provides
choice of 203 or 300 dpi print resolution
Members of the smartest bar code
printer family on the market, the
Intermec PD41 and PD42 are flexible
and programmable, enabling customers
to optimize their printing operations,
streamline deployment, and achieve quick
return on investment. Built to meet the
needs of mission-critical applications,
the rugged PD printers deliver advanced,
secure connectivity and the latest network
protocols, ensuring peace-of-mind today
and a reliable, scalable solution for the
long haul. The versatile PD41 and PD42
Commercial Printers are part of Intermec’s
complete line of smart, strong and secure
industrial printers.
Smart
The PD printers’ smart design features
support increased productivity in
demanding environments. As Smart
Printers, they can host stand-alone
applications, developed through Intermec
Fingerprint programming language, that
reduce errors and streamline operational
processes. Smart Printers can eliminate the
PC and control other devices directly (such
as scanners, scales, applicators), improving
efficiency and decreasing infrastructure
costs and complexity.
Their integrated device management and
diagnostic capabilities, provided through
Intermec SmartSystems™ and Wavelink
Avalanche™, reduce downtime and simplify
deployment. With user-selectable, all-inone programming languages (Fingerprint,
IPL, ZSim, DSim, ESim), the PD printers fit
existing IT infrastructures, deploying with
drop-in simplicity to Intermec or mixed
printer environments. Secure, industrystandard connectivity options support easy
integration and fast deployment.
Strong
With their all-metal chassis and covers,
proven printing mechanics and powerful
electronics, the rugged PD printers reduce
downtime and minimize maintenance
costs. The PD41’s simple, one-button
interface provides the ultimate in ease-ofuse. The PD42’s graphical display allows
users to set up, configure and fine tune
printing parameters without having to send
commands through the host, saving time.
An open design makes media loading quick
and easy, and the print head can easily be
replaced without tools. The printers are
co-engineered and tested with Intermec
labels and other media products, ensuring
optimized performance when used with
genuine Intermec media.
Secure
Multiple interface options are available,
including the highest level of secure
wireless connectivity (WPA2). The
industry’s only printers available with
WiFi- and CCX-Certification, Intermec
industrial printers help maintain wireless
network integrity and reduce configuration
time. Every printer ships with Ethernet
connectivity, as well as with emerging
network protocol IPv6, ensuring long-term,
enterprise scalability. Other connectivity
options – standard RS232 and USB ports,
optional parallel port – provide additional
integration flexibility.
The standard CompactFlash™ memory
slot is complemented by new USB host
and device support. Handy, inexpensive
and PC-compatible, CompactFlash and
USB memory technologies provide extra
storage for Fingerprint programs, layouts,
graphics*, fonts and firmware upgrades.
* Fingerprint only
Description
Direct thermal and thermal transfer label, ticket and
tag printers, with one-button user interface (PD41) or
full graphic user interface (PD42).
Physical Characteristics
Length: 453 mm (17.8 in)
Height: 273 mm (10.8 in)
Width: 270 mm (10.6 in)
Weight: 13 kg (28.7 lbs)
Print Specifications
Max. Width: 104 mm (4.09 in) at 203 dpi
105.7 mm (4.16 in) at 300 dpi
Max. Length: 1520 mm (59.8 in) at 203 dpi
1028 mm (40.5 in) at 300 dpi
Print Speed
50-150 mm/s (2-6 ips) at 203 dpi
50-100 mm/s (2-4 ips) at 300 dpi
Print Resolution
8 dots/mm (203 dpi)
11.8 dots/mm (300 dpi, option)
Media
Type: Labels & Tags
Max Width: 118.1 mm (4.65 in)
Max Width with cutter: 114m (4.49 in)
Min Width: 25.4 mm (1 in)
Thickness: 2.3 to 9.8 mil
Configuration: Roll-fed, die-cut, continuous or fanfold
Sensing: Gap, notch, black mark, continuous
Label Roll Max Diameter: 213 mm (8.38 in)
Label Roll Core: 38-76mm (1.5-3 in)
North America
Corporate Headquarters
6001 36th Avenue West
Everett, Washington 98203
Phone: (425) 348-2600
Fax: (425) 355-9551
North Latin America
Headquarters Office
Mexico
Phone: +52 55 52-41-48-00
Fax: +52 55 52-11-81-21
South Latin America
Headquarters Office
Brazil
Phone: +55 11 5502.6770
Fax: +55 11 5502.6780
Europe/Middle East &
Africa Headquarters Office
Reading, United Kingdom
Phone: +44 118 923 0800
Fax: +44 118 923 0801
Asia Pacific
Headquarters Office
Singapore
Phone: +65 6303 2100
Fax: +65 6303 2199
Type: Ribbons
Roll Max Diameter: 76 mm (2.99 in) or approx. 450m
Core ID: 25.4 mm (1”)
Type: Wax, mid-range, resin
Genuine Intermec Media: www.intermec.com/media
Interfaces
Standard:
• Ethernet 10/100 Mbps
• RS-232, up to 115.2 kB/s
Supported Serial Protocols:
• Fingerprint/Direct Protocol: XON/XOFF, ENQ/ACK,
DTR, RTS/CTS
• IPL: XON/XOFF, Intermec Std. Protocol
• USB 2.0
Optional:
• Parallel IEEE 1284
Wireless:
• IEEE 802.11 b/g
• Wi-Fi Certified, CCX (Cisco®) version 3 Certified
• WEP, WPA, WPA2, 802.11x (EAP-TTLS, LEAP,
PEAP, FAST), 802.11i
Supported Protocols: TCP/IP-suite (TCP, UDP, ICMP,
IGMP, etc.), LPR/LPD, FTP, BOOTP, DHCP, HTTP,
SNMPv3, SMTP.SNMP-MIB II supported (over UDP/IP),
private enterprise MIB included.
Supports IPv4 and IPv6
Software
Printer Command Languages:
• IPL
• Fingerprint/Direct Protocol
• ZSim (ZPL)
• DSim (DPL)
• ESim (EPL)
• XML enabled for SAP® AII and Oracle ® WMS
Applications / Drivers:
• InterDriver™ Windows printer driver
• Intermec label design and print package
• PrintSet for printer configuration
Development Software:
• Intermec Fingerprint Application Builder™ (IFAB)
Device Management Support:
• SmartSystems™
• Wavelink Avalanche™
Bar Code Symbologies
All major 1D and 2D symbologies are supported.
Internet
www.intermec.com
Worldwide Locations:
www.intermec.com/locations
Sales
Toll Free NA: (800) 934-3163
Toll in NA: (425) 348-2726
Freephone ROW:
00 800 4488 8844
Toll ROW: +44 134 435 0296
OEM Sales
Phone: (425) 348-2762
Standards Supported
UPC/EAN Shipping Container; UCC/EAN 128 Serial
Shipping Container; MH10.8 Shipping Label; AIAG
(shipping parts label); OGMARS; POSTNET; HIBCC;
ISBT 128; GM1724; UPS shipping label; Global Transport
label
Fonts
Scalable fonts including CP1252
Font cache for maximum performance
Non-Latin fonts and legacy fonts available
Graphics
Supports PCX file format. (Fingerprint Only)
Other formats supported with Label Generation Tools
Memory
Standard: 8MB Flash memory 16MB SDRAM (1
Compact Flash slot and 1 USB Boot / Hub Slot)
Available: Up to1GB CompactFlash (type 1) memory,
Multi GB USB Thumb Drive Memory
Keypad Control Panel
PD41:
One Print/Pause button
Four LED indicators: Power; Data Transfer; Error/
Warning; Ready-to-Work
PD42:
Keypad Control Panel and LCD console
One Print/Pause button
Four LED indicators: Power; Data Transfer; Error/
Warning; Ready-to-Work
Monochrome graphical display, 160 x 160 pixels
Power Supply
Voltage Range: 100-240 VAC ±10% auto switch
Frequency Range: 45-65 Hz
Operating Environment
Temperature: +5°to 40°C (+40°to 104°F)
Humidity: 20-85% non-condensing free air
Regulatory Approvals
FCC, UL, cUL, CE, NOM
Options
Internal rewinder, cutter, CompactFlash™ memory
cards, parallel interface, real-time clock
Media Sales
Phone: (513) 874-5882
Customer Service
and Support
Toll Free NA: (800) 755-5505
Toll in NA: (425) 356-1799
Copyright © 2009 Intermec Technologies Corporation. All
rights reserved. Intermec is a registered trademark of Intermec
Technologies Corporation. All other trademarks are the
property of their respective owners. Printed in the U.S.A.
612008-01A 010/09
In a continuing effort to improve our products, Intermec
Technologies Corporation reserves the right to change
specifications and features without prior notice.
Product profile
PX Series
High Performance Printers
• Strong, all-metal construction and
superior throughput for 24x7 printing
in harsh industrial environments
• Ideal for high volume & compliance
applications - the PX4i prints at
406 dpi without loss of speed
• Modular design facilitates integration
into automated labeling applications
• Smart Printing capabilities support
stand-alone printer applications,
eliminating PC expense and complexity
• All-in-one, user-selectable
printer languages - Fingerprint/
Direct Protocol (DP), IPL, ZSim
and DSim - in every printer
• Secure wireless connectivity : CCX
and WiFi® certified with WPA2
• Integrated Ethernet, USB host and
device, and serial interface standard
• Internet Protocol v6 (IPv6) support
• Interchangeable print head provides
choice of print resolution
• RFID option supports ISO18000
- 6B 6C/ EPC Gen 2
Members of the smartest bar code printer
family on the market, the PX4i and PX6i
are flexible and programmable, enabling
customers to optimize their printing
operations, streamline deployment, and
achieve quick return on investment. Built
to meet the needs of round-the-clock,
mission-critical applications, the rugged
PX printers deliver advanced connectivity
and network protocols, ensuring peace-ofmind today and a reliable, scalable solution
for the long haul. The PX4i and PX6i High
Performance Printers are part of Intermec’s
complete line of smart, strong and secure
industrial printers.
Smart
The PX printers’ smart design features
support increased productivity in
demanding environments. As Smart
Printers, they can host stand-alone
applications, developed through Intermec
Fingerprint programming language, that
reduce errors and streamline operational
processes. Smart Printers can eliminate the
PC and control other devices directly (such
as scanners, scales, applicators), improving
efficiency and decreasing infrastructure
costs and complexity.
The printers’ device management and
diagnostic capabilities, provided through
Intermec SmartSystems™ and Wavelink
Avalanche™, reduce downtime and simplify
deployment. With user-selectable, all-inone programming languages (Fingerprint,
IPL, ZSim, DSim), the PX printers fit with
drop-in simplicity to Intermec or mixed
printer environments. Their modular design
facilitates integration into automated
labeling applications and industrystandard connectivity options support fast
deployment.
Strong
The rugged, all-metal PX printers deliver
outstanding performance – up to 12 inches
per second from first label to last - and
incorporate features that reduce downtime
and minimize maintenance costs. Both
versions are available with 203 or 300-dpi
resolution, and the PX4i also offers 406
dpi, for precision labeling without any
loss of speed. This is ideal for compliance
labeling applications with variable data
requiring immediate results.
An enhanced self-strip option delivers
consistent performance across multiple
media types. Replacing printheads is
fast and easy, thanks to the magnetic
QuickMount™ printhead design. The PX
Series printers are co-engineered and
tested with Intermec labels and other
media products, optimizing performance
when used with genuine Intermec media.
Secure
Multiple interface options are available,
including the highest level of secure
wireless connectivity (WPA2). Available
with WiFi- and CCX-Certification, Intermec
industrial printers help maintain wireless
network integrity and reduce configuration
time. Every printer ships with Ethernet
connectivity, as well as with emerging
network protocol IPv6, ensuring long-term,
enterprise scalability.
The standard CompactFlash™ memory slot
is complemented by new USB host and
device support. Handy and PC-compatible,
these memory technologies provide extra
storage for Fingerprint programs, layouts,
graphics*, fonts and firmware upgrades.
The RFID-enabled PX printers enable
companies to create RFID smart labels and
drive the latest RFID applications.
* Fingerprint only
Physical Description
Direct thermal and thermal transfer label, ticket
and tag printer. Also available with RFID.
Physical Characteristics
LxHxW: PX4i: 482 x 238 x 275 mm (19.0 x 9.4 x 10.8 in)
PX6i: 482 x 238 x335 mm (19.0 x 9.4 x 13.2 in)
Weight: PX4i: 12.85 kg (28.4 lbs)
PX6i: 14.80 kg (32.6 lbs)
Print Specifications
Max. Print Width:
PX4i: 112 (DT)/110 (TT) mm (4.4/4.3 in)
PX6i: 167.4 mm (6.59 in)
Max. Length:
4095 mm (161 in) at 203 dpi
2775 mm (109 in) at 300 dpi
1016 mm (40 in) at 406 dpi
RFID Standards & Frequencies
Supports ISO 18000-6B and 18000-6C / EPC
Generation 2
865-928 MHz radio configured to comply with local
UHF RFID regulations including FCC and ETSI. Contact
local representative for availability in particular region.
Print Speed
PX4i: 100 - 300 mm/s (4 - 12 ips) for 203/300dpi
100 – 250 mm/s (4 – 10 ips) for 406 dpi
PX6i: 100 - 225 mm/s (4 - 9 ips) for 203/300dpi
North America
Corporate Headquarters
6001 36th Avenue West
Everett, Washington 98203
Phone: (425) 348-2600
Fax: (425) 355-9551
North Latin America
Headquarters Office
Mexico
Phone: +52 55 52-41-48-00
Fax: +52 55 52-11-81-21
South Latin America
Headquarters Office
Brazil
Phone: +55 11 5502.6770
Fax: +55 11 5502.6780
Europe/Middle East &
Africa Headquarters Office
Reading, United Kingdom
Phone: +44 118 923 0800
Fax: +44 118 923 0801
Asia Pacific
Headquarters Office
Singapore
Phone: +65 6303 2100
Fax: +65 6303 2199
Media Type: Labels & Tags
Max/Min Width:
PX4i: 120/ 25.4mm (4.72/ 1 in)
PX6i: 170/ 76 mm (6.69/ 3 in)
Thickness: 2.4 to 10.0 mil
Configuration: Roll-fed or fanfold
Sensing: Gap, notch, black mark, continuous
Label Roll Max Diameter: 213 mm (8.38 in)
Label Roll Core: 38-76mm (1.5-3 in)
Type: Ribbons
Roll Max Diameter: 80 mm (3.15in), approx. 450m
Core ID: 25.4 mm (1”)
Type: Wax, mid-range, resin
Genuine Intermec Media: www.intermec.com/media
Development Software:
• Intermec Fingerprint Application Builder™ (IFAB)
(RFID libraries included)
Device Management Support:
• SmartSystems™
• Wavelink Avalanche™
Interfaces
Standard:
• Ethernet 10/100 Mbps
• RS-232, up to 115.2 kB/s
Supported Serial Protocols:
• Fingerprint/Direct Protocol: XON/
XOFF, ENQ/ACK, DTR, RTS/CTS
• IPL: XON/XOFF, Intermec Std. Protocol
• USB 2.0
Optional:
• Parallel IEEE 1284
• Industrial Interface (8 digital in/out, 4 analog relays, 1 RS232/422/485 port)
• Dual Serial ports RS-232, RS-422, RS-485 and 20mA Current Loop, Applicator Interface
Wireless:
• IEEE 802.11 b/g
• Wi-Fi Certified, Cisco® Compatible (CCX) version 3 Certified
• WEP, WPA, WPA2, 802.11x (EAP-
TTLS, LEAP, PEAP, FAST), 802.11i
• Multiple industrial antenna options for maximized coverage
Supported Protocols: TCP/IP-suite (TCP, UDP,
ICMP, IGMP, etc.), LPR/LPD, FTP, BOOTP, DHCP,
HTTP, SNMPv3, SMTP.SNMP-MIB II supported
(over UDP/IP), private enterprise MIB included.
Supports IPv4 and IPv6
Fonts
Scalable fonts including CP1252
Font cache for maximum performance
Non-Latin fonts and legacy fonts available
Software
Printer Command Languages:
• IPL
• Fingerprint/Direct Protocol
• ZSim (ZPL)
• DSim (DPL)
• XML enabled for SAP® AII and Oracle® WMS
Applications / Drivers:
• InterDriver™ Windows printer driver
• Intermec label design and print package
• PrintSet for printer configuration
Internet
www.intermec.com
Worldwide Locations:
www.intermec.com/locations
Sales
Toll Free NA: (800) 934-3163
Toll in NA: (425) 348-2726
Freephone ROW:
00 800 4488 8844
Toll ROW: +44 134 435 0296
OEM Sales
Phone: (425) 348-2762
Media Sales
Phone: (513) 874-5882
Bar Code Symbologies
All major 1D and 2D symbologies are supported.
Standards Supported
UPC/EAN Shipping Container; UCC/EAN 128 Serial
Shipping Container; MH10.8 Shipping Label; AIAG
(shipping parts label); OGMARS; POSTNET; HIBCC; ISBT
128; GM1724; UPS shipping label; Global Transport label
Graphics
Supports PCX file format. (Fingerprint Only)
Other graphic formats supported
with Label Generation Tools
Memory
Standard: 16MB Flash memory, 32MB
SDRAM, 1 Compact Flash slot
Available: 1GB CompactFlash memory, multi-GB USB
memory device (FAT16/FAT32 USB drivers supported)
Keypad Control Panel
Interactive numeric keypad control panel
Power Supply
AC Voltage: 90 to 265 VAC, 45 to 65Hz
PFC Regulation: IEC 61000-3-2
Power Consumption: Standby 20W;
Continuous average 125W; Peak 400W
Operating Environment
Ambient Operating Temperature:
+5°C to +40°C (+41°F to +104°F)
Storage Temperature: -20°C to +70°C (-4°F to +152°F)
Humidity: 10 to 90% non-condensing
Regulatory Approvals
CE (EN55022 Class A), FCC Class A, UL/cUL, C-Tick
Options
RFID, integral self-strip unit with liner takeup,
Label Taken Sensor (LTS), Compact Flash (CF)
memory, various international double byte fonts,
alphanumeric keyboard*, parallel interface board,
additional serial interface board*, industrial interface
board*, applicator interface board*, real time
clock, media supply hub, cutter, label low sensor
*Not applicable when using IPL firmware
Customer Service
and Support
Toll Free NA: (800) 755-5505
Toll in NA: (425) 356-1799
Copyright © 2009 Intermec Technologies Corporation. All
rights reserved. Intermec is a registered trademark of Intermec
Technologies Corporation. All other trademarks are the
property of their respective owners. Printed in the U.S.A.
611557-01I 10/09
In a continuing effort to improve our products, Intermec
Technologies Corporation reserves the right to change
specifications and features without prior notice.
Zebra® ZE500™ Series
Print Engine
Innovative design,
greater benefits
and replacement simple, and the quickchange modular drive system reduces
printer repair time.
The new ZE500 Series takes an
innovative approach to OEM print
engines. Leveraging extensive customer
research, the design focuses on ease of
use, integration and servicing. Built with
the customer in mind, the ZE500 Print
Engine is designed to keep missioncritical print-and-apply applications
operating without interruptions.
Routine operations such as ribbon
changing are simple and straightforward
(and identical for both print widths). The
new graphic display can be deported and
rotated, enabling flexible positioning for
improved ease of use and integration.
The elegant design of the ZE500
simplifies maintenance and dramatically
reduces downtime. All three rollers can
be exchanged in minutes, with no need
to access the printer’s electronics. The
wide open printhead makes cleaning
Ideal for print-and-apply labelling
applications for products, cartons,
cases and pallets in:
• Manufacturing and warehousing
• Automotive
• Pharmaceuticals
• Food and beverage
• Health and beauty
The user experience is much improved:
the design enables easy integration with
print-and-apply machinery plus has better
resistance to dust and water. Expanded
connectivity ports and enhanced
software control of the applicator port
provides further integration flexibility.
Get the most out of your Zebra printer: put genuine Zebra supplies in!
Zebra offers a wide range of supplies for ZE500 Series Print Engines,
all made to a high standard and suitable for a variety of applications.
• Manufactured exclusively for Zebra printers
• Laboratory-tested for optimum performance
• Proven to minimise wear and tear on printheads
www.bbk-gmbh.de
For more information, visit www.zebra.com
Zebra ZE500 Series Print Engine datasheet
1
SPECIFICATIONS AT A GLANCE*
ZEBRA ZE500 SERIES PRINT ENGINE
Standard features
Operating characteristics
• Print methods: thermal-transfer or direct-thermal
• Orientation: right-hand or left-hand
• Industrial all-metal construction
• 16MB SDRAM, 64MB flash memory
• Applicator interface
• Transmissive and reflective media sensors
• Multi-level Element Energy Equalizer™ (E3™) for superior print quality
• Real-time clock
• Rotatable display
• ZPL II™ – universal language for Zebra printers
Environment
Printer specifications
ZE500-4™:
• Maximum print width: 104mm (4.1")
Media specification
• Label and liner width: 16mm (0.625") to 114mm (4.5")
• Minimum length with back feed: 13mm (0.5")
• Minimum length without back feed: 6.5mm (0.25")
• Minimum length in stream mode: 6.5mm (0.25")
• Maximum length: 990mm (39")
• Maximum continuous media print length: 3,810mm (150")
• Ribbon width: 25.4mm (1") to 107mm (4.2")
• Operating temp.: 0ºC (31ºF) to 40ºC (104ºF)
• Storage temp.: -40ºC (-40ºF) to 71ºC (160ºF)
• Operating humidity: 20% to 95% non-condensing R.H.
• Storage humidity: 5% to 95% non-condensing R.H.
Electrical
• Universal power supply with power-factor correction 90–264 VAC, 47–63Hz
Connectivity
• Parallel port: Centronics®-compatible
• Serial interface: RS-232
• USB 2.0
• Internal ZebraNet™ 10/100
• Applicator interface with DB-15F connector
• Optional ZebraNet b/g Print Server
Agency Approvals
• VCCI, CCC
– Standards approvals: IEC 60950-1; EN 55022, Class A; EN 55024;
EN 61000-3-2, 3-3
– Product markings: NRTL; CE; FCC A; ICES-003; VCCI; C-Tick; CCC; NOM;
Gost-R; S-Mark; KCC; BSMI
Physical characteristics
Resolution
ZE500-4:
ZE500-6:
• 8 dots/mm (203dpi) or 12 dots/mm (300dpi)
• Width: 245mm (9.6")
• Depth: 379mm (14.9")
• Height: 300mm (11.8")
• Weight: 15.4kg (34lb)
• Width: 245mm (9.6")
• Depth: 438mm (17.2")
• Height: 300mm (11.8")
• Weight: 17.3kg (38lb)
Maximum print speed
• 305mm (12") per second (203 and 300 dpi)
ZE500-6™:
• Maximum print width: 168mm (6.6")
Fonts/Graphics/Symbologies
Media specification
Fonts and character sets
• Label and liner width: 76mm (3") to 180mm (7.1")
• Minimum length with back feed: 76mm (3")
• Minimum length without back feed: 25.4mm (1")
• Minimum length in stream mode: 25.4mm (1")
• Maximum length: 990mm (39")
• Maximum continuous media print length: 3,810mm (150")
• Ribbon width: 76mm (3") to 180mm (7.1")
• 8 dots/mm (203dpi) or 12 dots/mm (300dpi)
• Zebra Global printing solution including Unicode™
• Swiss 721 font standard
• Bitmap fonts A to H and GS symbols are expandable up to 10 times,
height- and width-independent
• Smooth-scalable font Ø (CG Triumvirate™ Bold Condensed) is expandable
dot-by-dot, height- and width-independent
• IBM® Code Page 850 International Characters
• Contains UFST® from Agfa Monotype Corporation
• Firmware support for downloadable TrueType™ fonts
• Additional fonts available
Maximum print speed
Graphics features
• 305mm (12") per second (203dpi)
• 254mm (10") per second (300dpi)
• Supports user-defined fonts and graphics, including custom logos
Media characteristics
• All standard linear and 2D barcodes supported
Labels
ZebraLink™ Solutions
Media thickness (label and liner)
Software
• ZE500-4: 0.135mm (0.0053") to 0.254mm (0.010")
• ZE500-6: 0.076mm (0.003") to 0.305mm (0.012")
Media types
• ZebraDesigner™ Pro
• ZebraNet Bridge Enterprise
• ZBI 2.0™ ZBI-Developer™
• Continuous, die-cut or black mark
Firmware
Ribbons
• ZPL II
• Web View
• Alert
• ZBI 2.0
Resolution
Max. roll size
• 101.6mm (4") O.D. on a 25.4mm (1") I.D. core
Standard length
• 600m capacity
Barcode symbologies
*Specifications subject to change without notice.
©2012 ZIH Corp. Element Energy Equalizer, E3, ZBI 2.0, ZBI-Developer, Zebra, representation of Zebra Head, ZebraDesigner, ZebraLink, ZebraNet, ZPL II and all product names and numbers are Zebra
trademarks, and may be registered trademarks of ZIH Corp in certain jurisdictions. All rights reserved. Unicode is a trademark of Unicode, Inc. CG Triumvirate and UFST are trademarks of Monotype Imaging,
Inc. and may be registered in certain jurisdictions. TrueType is a trademark of Apple Inc. IBM is a registered trademark of International Business Machines Corporation in the United States, other countries, or
both. Centronics is a registered trademark of Centronics Data Computer Corporation. All other trademarks are the property of their respective owners.
BBK Etikettier- und Sondermaschinenbau GmbH
Dieselstraße 18 • D-64743 Beerfelden
Other EMEA LocationsPhone: 06068 9310-0 • Fax: 06068 9310-99
Europe: France, Germany, Italy, the Netherlands, Poland, Russia, Spain, Sweden, Turkey
www.bbk-gmbh.de • info@bbk-gmbh.de
Middle East & Africa: Dubai, South Africa
Zebra Technologies – EMEA Headquarters & Sales Office
Zebra Technologies Europe Limited, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5XF, United Kingdom
Telephone: +44 (0)1628 556000 Fax: +44 (0)1628 556001 Email: mseurope@zebra.com Web: www.zebra.com
www.zebra.com
Please recycle after use
12628L (08/12)
Zebra® ZT200™ series
Designed with the user in mind
Zebra incorporated extensive customer feedback, as well as
the legacy of its Stripe® and S4M™ printers, to create the new
ZT200 series printers, which feature elegant space-saving
design, effortless setup, intuitive user operation, and ease
of service and maintenance.
Whether you are adopting barcode technology for the first time
or upgrading existing printer models, the ZT200 series is the right
choice for a variety of labelling applications. These innovative
new printers provide many user benefits.
The ZT200 series offers a streamlined design and smaller footprint
that takes up less physical space than the Stripe and S4M models.
ZT200 series printers require minimal operator training and
benefit from tool-less standard component maintenance and a
durable design to minimise service. Your IT staff will appreciate
the backwards compatibility, since it allows for new printers to be
up and running with minimal downtime.
The ZT200 series has been designed for ease of use, versatility
and outstanding value.
Ideal for:
• Manufacturing
– Work-in-process
– Product ID/serial numbers
– Packaging labels
– Receiving/put-away labelling
• Transportation/Logistics
– Order picking/packing
– Shipping/Receiving
– Cross-docking
– Compliance labelling
• Healthcare
– Orders
– Specimen labels
– Asset-tracking
– Unit-of-use labelling
• Retail
– Shelf labelling
– Shipping
– Returns
– Item tags
• Government
– Asset-tracking
– Logistic labelling
– Warehousing
The ZT200 series design is the culmination
of extensive feedback from our customers and
understanding their printing applications, evolving
business needs and operational challenges.
The ZT200 series offers outstanding performance and
features not usually found in a printer this affordable.
Space-saving design
• Engineered for greater print precision with finetuned adjustments
• Compact footprint and streamlined design fits easily
in confined areas where space is at a premium
• Crisp, clean text and barcodes – even on narrow media
• Elegant space-saving design with unique bi-fold door
(requires 102mm/4" of opening space) fits easily into
tight spaces, maximising work space
Zebra reliability and durability
Print quality
• Built for light industrial and commercial environments
• Energy Star®-compliant
Fast installation and integration
• Ideal replacement printer for older Stripe and S4M models
• Drive system designed for optimal performance, with minimal
maintenance required
• Multiple connectivity options: parallel, 10/100 Ethernet,
802.11b/g/n wireless
Simplified serviceability
• Icon-based status LEDs provide immediate and easily
visible printer status
• Easy, tool-less platen and printhead removal enable simple
cleaning and replacement
Intuitive, effortless media loading
• Side-loading design eliminates complicated threading
of supplies
• Colour-coded cues give even first-time users visual
guidance for loading ribbon and media
• Illuminated moveable sensor is visible through the
media for trouble-free sensor-position adjustment
• Simple interchangeable connectivity options enable rapid
printer changes and upgrade
• Only three common tools needed for basic service
Comparing the ZT220™
and the ZT230™ models
The ZT200 series offers two models – the ZT220
and the ZT230. Compare the features to see
which printer best suits your needs.
ZT230
• Rugged all-metal case for long-lasting use
ZebraCare™ Services
Increase printer uptime and reduce lost productivity
and unbudgeted repair costs by selecting a ZebraCare
service agreement. A cost-effective means of
planning and budgeting for your annual maintenance
expenditures, your agreement ensures that trained
Zebra technicians will bring your printer back to factory
specifications. Zebra offers a variety of plans to fit your
budget and business needs.
• 450m ribbon capacity for increased uptime and fewer
ribbon changes
• Graphical user interface printer setup and control
• Ideally suited for barcode-labelling applications that require
more frequent label changes
ZT220
• Zebra’s most affordable table-top printer
• Durable high-impact polymer case for long-lasting use
• 300m ribbon capacity
• Simple single-use three-button user interface
• Ideally suited for barcode-labelling applications
with infrequent label changes
Genuine Zebra supplies
Zebra offers a wide range of supplies for your
ZT200 series printers, all made to a high standard
and suitable for a variety of applications.
• Manufactured exclusively for Zebra printers
• Laboratory-tested for optimum performance
• Proven to minimise wear and tear on printheads
For more information visit, www.zebra.com
www.bbk-gmbh.de
ZebraLink™ software
The ZebraLink suite of software and tools makes it
simple to design, manage and adapt a print solution
tailored to meet your unique business needs. Each
solution component is designed to maximise ease of
use and integration. With ZebraLink, you’ll get more
performance, value and power out of your ZT200 printers
with minimal IT attention or process disruptions.
Specifications at a glance*
Standard features
Ribbon characteristics
ZebraLink Solutions
• Print methods: direct-thermal or thermal-transfer
(optional)
• Construction: metal frame with choice of metal
(ZT230) or plastic (ZT220) media cover
• Bi-fold media door with large clear window
• Side-loading supplies path for simplified media
and ribbon loading
• Element Energy Equalizer™ (E3™) for superior
print quality
• Bi-colour LEDs for quick printer status
• Icon-based LCD multilingual graphical user
interface and full function keypad (ZT230)
• Simple keypad (ZT220)
• USB 2.0 and RS-232 serial ports
• Energy Star-compliant
(Thermal-transfer option only)
Optional software
• ZebraDesigner™ Pro
• ZebraNet™ Bridge Enterprise
• ZebraNet Setup Utilities v 7.0
• ZBI 2.0™ ZBI-Developer™
Printer specifications
Environmental
• Operating temperature: 5ºC to 40ºC (thermaltransfer) and 0ºC to 40ºC (direct-thermal)
• Storage temperature: -40ºC to 60ºC
• Operating humidity: 20% to 85% non-condensing
• Storage humidity: 5% to 85% non-condensing
Resolution
• 8 dots per mm/203dpi
• 12 dots per mm/300dpi (optional)
Memory
• Standard: 128MB flash (58MB user-available),
128MB DRAM
Print width
• 104mm/4.09"
Print speed
• 152mm/6" per second
Media sensors
• Transmissive and reflective sensors
Media characteristics
• Maximum label and liner width: 114mm/4.5"
• Maximum non-continuous label length: 991mm/39"
Media width
• 19.4mm/0.75" to 114mm/4.50"
Outside diameter
• 81.3mm/3.2" on a 25mm/1.0" I.D. core (ZT230)
Standard length
• 300m/984' (ZT220) or 450m/1,476' (ZT230)
Ratio
• 2:1 media-roll-to-ribbon ratio for ZT220
• 3:1 media-roll-to-ribbon ratio for ZT230
Width
• 40mm/1.57" to 110mm/4.33"
Ribbon setup
• Ribbon wound ink-side out, core to core
Operating characteristics
Electrical
• Universal auto-ranging (PFC-compliant) power
supply 90–265VAC; 48–62Hz
• Energy Star-compliant
Agency approvals
• IEC 60950, EN 55022 Class B, EN 55024,
EN 61000-3-2, EN 61000-3-3
• Markings: UL, CE Marking, FCC-B, ICES-003, VCCI,
C-Tick, NOM, IRAM, CCC, GOST-R
Physical characteristics
(ZT220 closed)
• Width: 239mm/9.4"
• Height: 280mm/11"
• Depth: 432mm/17"
• Weight: 7.8kg/17lb
Print length
• 203dpi: 3,988mm/157"
• 300dpi: 1,854mm/73"
Maximum media roll size
• 203mm/8.0" O.D on a 76mm/3.0" I.D. core
• 152mm/6.0" O.D. on a 25mm/1.0" I.D. core
Physical characteristics
(ZT230 closed)
Media thickness
• 0.076mm/0.003" to 0.25mm/0.010"
• Width: 242mm/9.5"
• Height: 277mm/10.9"
• Depth: 432mm/17"
• Weight: 9.1kg/20lb
Media types
• Continuous, die-cut, notch, black-mark
Options and accessories
Optional connectivity
• ZebraNet® b/g/n Wireless Print Server (internal)
• ZebraNet 10/100 PrintServer (internal or external)
• Centronics® parallel port (internal)
Firmware
• ZPL II®
• Zebra Global Printing Solution
• EPL2™ (late 2012)
• Web View & Alert
• ZBI 2.0 (optional)
Barcode symbologies
• Linear barcodes: Code 11, Code 39,
Code 93, Code 128 with subsets A/B/C and
UCC Case Codes, ISBT-128, UPC-A, UPC-E,
EAN-8, EAN-13, UPC and EAN with 2 or 5 digit
extensions, Plessey, Postnet, Standard 2-of-5,
Industrial 2-of-5, Interleaved 2-of-5, Logmars,
MSI, Codabar, Planet Code
• 2-Dimensional: Aztec, Codablock, PDF417,
Code 49, Data Matrix, MaxiCode, QR Code,
MicroPDF417, TLC 39, RSS-14 (and composite)
Fonts and graphics
• 7 bitmapped, 1 smooth-scalable
(CG Triumvirate™ Bold Condensed).
Contains UFST® from Agfa Monotype
• Pre-loaded Unicode™-compliant scalable
fonts for EMEA character sets
• International character sets supporting the
following code page: IBM® Code Page 850
• Supports user-defined fonts and graphics,
including custom logos
• ZPL II drawing commands including boxes
and lines
For optimum print quality and printer performance,
use genuine Zebra supplies.
• Peel – a front-mount, passive-peel
with no take-up spindle
• Peel – a front-mount, passive-peel
with liner take-up spindle (factory-fit only)
• Cutter – a front-mount guillotine cutter
• Real-time clock (RTC)
• Keyboard display unit (KDU)
*Specifications subject to change without notice.
©2012 ZIH Corp. E3, Element Energy Equalizer, EPL2, ZBI 2.0, ZBI-Developer, ZebraCare, ZebraDesigner, ZebraLink and all product names and numbers are Zebra trademarks, and Zebra, representation of Zebra Head,
Stripe, ZebraNet and ZPL II are registered trademarks of ZIH Corp. All rights reserved. Energy Star is a registered trademark of the Environmental Protection Agency. Centronics is a registered trademark of Centronics
Data Computer Corporation. CG Triumvirate and UFST are trademarks of Monotype Imaging, Inc. and may be registered in certain jurisdictions. Unicode is a trademark of Unicode, Inc. IBM is a registered trademark of
International Business Machines Corporation in the United States, other countries, or both. All other trademarks are the property of their respective owners.
Zebra TechnologiesBBK
– EMEAEtikettierHeadquarters & Sales
OfficeSondermaschinenbau GmbH
und
Zebra Technologies Europe Limited, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5XF, United Kingdom
Dieselstraße
18
• D-64743
Telephone: +44 (0)1628
556000 Fax: +44
(0)1628
556001 Email:Beerfelden
mseurope@zebra.com Web: www.zebra.com
Phone: 06068 9310-0 • Fax: 06068 9310-99
Other EMEA Locations
www.bbk-gmbh.de
• info@bbk-gmbh.de
Europe: France, Germany,
Italy, the Netherlands, Poland,
Russia, Spain, Sweden, Turkey
Middle East & Africa: Dubai, South Africa
www.zebra.com
Please recycle after use
12624L Rev. 01 (03/12)
Zebra® 105SLPlus™ Printer
PLACEHOLDER
Economical, dependable, high-performance printing
Zebra’s 105SLPlus printer provides
economical, dependable, highperformance printing. This rugged
printer is built for continuous
operation, with exactly the
features needed for fast, reliable
and cost-effective printing in your
manufacturing and warehousing
environments.
The 105SLPlus printer leverages
Zebra’s proven electronics platform
to offer increased speed for
high-volume applications – and
increased storage of formats, fonts
and graphics. The print quality is
outstanding, with E3™ technology
that also extends the life of the
printhead.
Zebra created the 105SLPlus printer
with ease of use in mind. The iconbased, multilingual graphical LCD
user interface is intuitive to operate,
minimising user training and making
the printer ideal for a multitude of
languages and global applications.
The simplified ribbon-loading
process minimises downtime.
The 105SLPlus printer is designed
to easily fit into existing operations.
Multiple standard connectivity
options including parallel, serial,
USB and Ethernet, coupled with
full backwards, compatibility, make
integration fast and simple. For
added connectivity, choose the
optional ZebraNet™ b/g Print Server
for wireless support.
Ideal for:
• Manufacturing
–– Product identification labels
–– Packaging labels
–– Receiving/put-away labelling
–– Work-in-process
• Transportation & Logistics
–– Order picking/packing
–– Shipping/receiving
–– Cross-docking
–– Compliance labelling
• Retail
–– Shipping
–– Returns
• Government
–– Asset-tracking
–– Compliance labelling
The 105SLPlus printer offers durable
all-metal construction and a robust
print mechanism to withstand the
toughest environments.
Zebra 105SLPlus Printer Datasheet
1
SPECIFICATIONS AT A GLANCE*
ZEBRA 105SLPlus PRINTERS
Printer name
Ribbon characteristics
ZebraLink™ Solutions
105SLPlus
• Standard lengths: 450m/1476' or 300m/984'
• Provides 2:1 and 3:1 media-roll-to-ribbon ratios
• Maximum ribbon roll size:
81.3mm/3.2" O.D. on a 25.4mm/1.0" I.D. core
• Ribbon wound coated-side out
• Ribbon width:
20mm/0.79" to 110mm/4.33"
Software
Standard features
• Full-function front panel and large multilingual
backlit LCD display with user-programmable
password protection
• Thin-film printhead with Element Energy
Equalizer™ (E3) for superior print quality
• 8MB flash memory, including 2MB useravailable non-volatile memory storage for
downloadable objects
• Serial RS-232 and bi-directional parallel ports
with auto-detect
• USB 2.0
• Dual media sensors (transmissive and reflective)
selectable through software or front panel
• Internal ZebraNet 10/100 Print Server supports
10Base-T, 100Base-TX and fast Ethernet 10/100
auto-switching networks
Printer specifications
Operating characteristics
Environment
• Operating environment:
Thermal-transfer:
5°C/40°F to 40°C/105°F
Direct-thermal:
0°C/32°F to 40°C/105°F
20% to 85% non-condensing
relative humidity
• Storage/Transportation environment:
-40°C/-40°F to 60°C/140°F
5% to 85% non-condensing relative humidity
Electrical
Resolution
• 203dpi/8 dots per mm
• 300dpi/12 dots per mm (optional)
Memory
• Standard: 16MB SDRAM; 8MB flash
Print width
• 102mm/4.0"
Print length
• 203dpi: 3,810mm/105" (with standard memory)
• 300dpi (optional): 2,540mm/100" (with standard
memory)
Print speed
• 203dpi: 305mm/12" per second
• 300dpi: 254mm/10" per second
Media sensors
• Black mark and gap media sensing using fixed
centre-position sensors; label-present sensor
for issuing labels one at a time
Media specifications
• Universal power supply with power-factor
correction 100–240VAC, 47–63Hz
Agency approvals
• IEC 60950-1, EN 55022 Class B, EN 55024,
EN 61000-3-2, EN 61000-3-3
• Product markings: cTUVus, CE, FCC-B,
ICES-003, VCCI, C-Tick, NOM, S-Mark (Arg),
CCC, GOST-R, BSMI, KCC and UkrSEPRO
Physical characteristics
• Height: 393.7mm/15.5"
• Width: 1,261.9mm/0.31"
• Depth: 517.5mm/20.38"
• Weight: 22.7kg/50 lb
Options and accessories
• Cutter and catch tray
• Media rewind spindle: internal finished-roll
rewind or passive-peel with liner take-up spindle
• 64MB On-Board Linear Flash Memory (factoryinstalled only)
• Scalable and international fonts
• ZebraDesigner™ Pro
• ZebraDesigner for myXML
• ZebraNet Bridge Enterprise
• ZebraDesigner for mySAP™
• ZebraDesigner for XML
• ZebraNet Utilities v 7.0
Optional connectivity
• ZebraNet b/g Print Server (internal)
Firmware
• ZPL II®
• Zebra Global Printing Solution
• Web View & Alert
• ZBI 2.0™ (optional)
Fonts and character sets
• Zebra Global Printing solution including
Unicode™
• Swiss 721 font standard
• Bitmap fonts A to H and GS symbols are
expandable up to 10 times, height- and widthindependent
• Smooth-scalable font Ø (CG Triumvirate™ Bold
Condensed) is expandable dot-by-dot, heightand width-independent
• IBM® code page 850 international characters
• Contains UFST® from Monotype Imaging, Inc.
Firmware support for downloadable
TrueType™ fonts
• Additional fonts available
Graphics features
• Supports user-defined fonts and graphics,
including custom logos
Barcode symbologies
• All standard linear and 2D barcodes supported
For optimum print quality and printer performance, use
genuine Zebra supplies.
• Media types: continuous, die-cut, or
black mark, notch
• Media thickness (label and liner):
0.076mm/0.003" to 0.305mm/0.012"
• Maximum media roll size: 203mm/8.0" O.D.
on a 76mm/3" I.D. core
• Media width (label and liner):
20mm/0.79" to 114mm/4.5"
• Maximum non-continuous label length:
991mm/39"
BBK Etikettier- und Sondermaschinenbau GmbH
Dieselstraße 18 • D-64743 Beerfelden
Phone: 06068 9310-0 • Fax: 06068 9310-99
www.bbk-gmbh.de • info@bbk-gmbh.de
*Specifications subject to change without notice.
©2013 ZIH Corp. E3, Element Energy Equalizer, ZBI 2.0, ZebraLink and ZebraNet are Zebra trademarks, and Zebra, representation of Zebra Head and ZPL II are registered trademarks of ZIH Corp. All rights
reserved. mySAP is the trademark or registered trademark of SAP AP in Germany and in several other countries. Unicode is a trademark of Unicode, Inc. CG Triumvirate and UFST are trademarks of Monotype
Imaging, Inc. and may be registered in certain jurisdictions. IBM is a registered trademark of International Business Machines Corporation in the United States, other countries, or both. TrueType is a trademark
of Apple Inc. All other trademarks are the property of their respective owners.
Please recycle after use
12624L (01/13)
Zebra® Xi™ series
Incredibly robust. Totally reliable.
Extremely fast.
Designed to deliver the perfect blend of performance and functionality, the robust
and reliable Xi series printers are optimised for high-volume operations.
Zebra Xi series printers are legendary for their durability, outstanding print quality,
fast throughput, long life and unparalleled reliability in demanding applications.
These qualities translate into low total cost of ownership – making them an ideal
smart investment for businesses with high-volume, mission-critical and speciality
labelling applications.
Ideal for:
Xi4™ printers build on this legacy to boost operational productivity beyond previous
Xi generations with faster print speeds on selected models, dependable print quality
and enhanced early-warning systems.
• Asset management
Manufacturing
• Work-in-progress labelling
• Inventory management
Versatile connectivity options plus remote printer deployment/management via
ZebraLink™ Solutions ensure that integration is now even easier.
• Product-identification labelling
Enhanced Xi4 printers feature:
Transport and logistics
• Receiving and shipping labels
• Dependable print quality – on-board diagnostics to ensure optimum print quality
• Faster print speeds – up to 356mm per second (110Xi4™ and 140Xi4™) for
increased batch and print/apply productivity
• Large easy-to-read front panel with LCD content and navigation customisable
to meet user needs
• Compliance labelling
• Asset-tracking labels
Government and public sector
• Military logistics
• Fast 10/100 Ethernet connectivity as standard
• Improved ribbon- and media-low LCD/network alerts
• RFID-upgrade-ready (110Xi4)
Get the most out of your Zebra: put genuine Zebra supplies in!
Zebra offers a wide range of supplies for Xi printers, all made to a high standard
and suitable for a variety of applications.
• Manufactured exclusively for Zebra printers
• Laboratory-tested for optimum performance
• Proven to minimise wear and tear on printheads
For more information, visit www.bbk-gmbh.de
EMEA_Zebra Xi Series datasheet_English_MS_11-10.indd 1
29/10/10 17:26:41
Xi series printers and accessories
Meet the Xi4 family!
110Xi4 – 203/300dpi
110Xi4 – 600dpi
The 110Xi4, with 203- or 300dpi printhead, prints
up to four inches wide, making it ideal for shipping,
warehousing and manufacturing. For crisp, highquality printing on small product labels, order the
110Xi4 with 300dpi printhead.
110Xi4 with 600dpi printhead is unmatched at
printing precise bar codes, text and graphics in
limited label space. This printer is ideal when
you require extremely high resolution and
density – for labelling electronic components,
telecommunication assemblies, medical devices,
pharmaceutical vials, and more.
Technical specifications*
Technical specifications*
Maximum print area
Width: 102mm (4")
Length: 991mm (39")
Maximum print area
Width: 102mm (4")
Length: 991mm (39")
Resolution
8 dots/mm (203dpi)
12 dots/mm (300dpi)
Resolution
23.5 dots/mm (600dpi)
Xi4 printers offer superior ZebraLink
Solutions, including:
Software
• ZebraDesigner™ Pro – An intuitive, easy-to-use
software program that makes creating complex
label designs and changing label format simple
• ZebraDesigner – Offers basic design features
focused on delivering an easy-to-use label
design application
• ZebraNet™ Bridge Enterprise – Centrally manage
Zebra printers from a single PC screen anywhere
on your global network
• ZebraNet Utilities v 7.0 – Provides enhanced
printing, conversion and administration
capabilities, message management and more
• Zebra Universal Driver – The most powerful
driver available from Zebra
• ZBI-Developer™ – Intuitive programming
utility used to create, test and distribute
ZBI™ applications
Networking
• ZebraNet® Wireless Plus Print Server – Delivers
wireless security and new
wireless capabilities
• ZebraNet 10/100 Print Server – Available
in an internal or external version that provides
a complete wired solution for 10Base-T,
100Base-TX and Fast Ethernet 10/100
auto-switching networks
Firmware
• ZPL II® – Universal language for Zebra printers
simplifies label formatting and enables format
compatibility with other Zebra printers
• XML-enabled printing – Direct-connect
integration for bar-code-label printing that
eliminates licence fees and printer server
hardware, and lowers customisation and
programming costs
• Web View – Enables you to connect and control
your bar code printer’s Web interface using a
common Web browser
• Alert – Printers equipped with ZebraNet print
servers will notify you via any e-mail-enabled
wired or wireless device to minimise downtime
• ZBI – Optional, powerful programming
enhancement that lets printers run stand-alone
applications, connect to peripherals, and
much more
Maximum print speed
203dpi: 356mm (14") per second
300dpi: 305mm (12") per second
Physical characteristics
Width: 261.9mm (10.31")
Depth: 517.5mm (20.38")
Height: 393.7mm (15.5")
Weight: 22.7kg (50lb)
Media specifications
Label and liner width: 20mm (0.79") to
114mm (4.5")
Ribbon width: 20mm (0.79") to 110mm (4.33")
Maximum print speed
152mm (6") per second
Physical characteristics
Width: 261.9mm (10.31")
Depth: 517.5mm (20.38")
Height: 393.7mm (15.5")
Weight: 22.7kg (50lb)
Media specifications
Label and liner width: 20mm (0.79") to
114mm (4.5")
Ribbon width: 20mm (0.79") to 110mm (4.33")
RFID upgrade-ready
The 110Xi4 printer has an RFID-ready option that
allows you to upgrade to RFID technology in the
future. Upgrade kit for UHF EPC Gen 2, Class 1compliant. RFID enablement coming soon.
* Specifications subject to change without notice.
EMEA_Zebra Xi Series datasheet_English_MS_11-10.indd 2
29/10/10 17:26:49
es,
140Xi4
170Xi4™
220Xi4™
The 140Xi4 is one of the fastest printers in
Zebra’s Xi series, printing at up to 355mm (14")
per second. With such powerful performance and
steel ­construction, it is the ideal choice for highvolume, mission-critical applications with 24-hour
duty cycles. The 140Xi4 is also well suited for
applications in which labels are required quickly,
either on demand or in batches.
The 170Xi4 is ideal for AIAG, ODETTE, ­UCC/EAN128 and other compliance labels on demand or in
batches. With 203- and 300dpi print resolution, it
can print labels up to 168mm (6.6") wide at speeds
of up to 305mm (12") per second. Like all Xi4
printers, its rugged steel construction enables it to
operate dependably in the harshest environments.
The 220Xi4 quickly prints labels up to 216mm (8.5")
wide at 254mm (10") per second. It is ideal for
wide‑label applications such as chemical drum
labels, primary metal standard labels, automotive
industry labels, banner-sized labels and pallet
and container ­shipping labels. Choose the 300dpi
version where high-density graphics or small fonts
are required.
Technical specifications*
Technical specifications*
Technical specifications*
Maximum print area
Width: 128mm (5.04")
Length: 991mm (39")
Maximum print area
Width: 168mm (6.6")
Length: 991mm (39")
Maximum print area
Width: 216mm (8.5")
Length: 991mm (39")
Resolution
8 dots/mm (203dpi)
Resolution
8 dots/mm (203dpi)
12 dots/mm (300dpi)
Resolution
8 dots/mm (203dpi)
12 dots/mm (300dpi)
Maximum print speed
203dpi: 305mm (12") per second
300dpi: 203mm (8") per second
Maximum print speed
203dpi: 254mm (10") per second
300dpi: 152mm (6") per second
Physical characteristics
Width: 338.1mm (13.31")
Depth: 517.5mm (20.38")
Height: 393.7mm (15.5")
Weight: 30.5kg (67lb)
Physical characteristics
Width: 397.5mm (15.65")
Depth: 495mm (19.5")
Height: 393.7mm (15.5")
Weight: 32.7kg (72lb)
Media specifications
Label and liner width: 51mm (2") to 180mm (7.1")
Ribbon width: 51mm (2") to 170mm (6.7")
Media specifications
Label and liner width: 108mm (4.25") to
224mm (8.8")
Ribbon width: 108mm (4.25") to 220mm (8.6")
Maximum print speed
356mm (14") per second
Physical characteristics
Width: 287.3mm (11.31")
Depth: 517.5mm (20.38")
Height: 393.7mm (15.5")
Weight: 25kg (55lb)
Media specifications
Label and liner width: 40mm (1.57") to
140mm (5.51")
Ribbon width: 40mm (1.57") to 130mm (5.1")
EMEA_Zebra Xi Series datasheet_English_MS_11-10.indd 3
29/10/10 17:27:04
Specifications at a glance*
Standard features
Operating characteristics
• Dependable print quality – on-board diagnostics
ensure optimum print quality
• Print methods: Thermal-transfer or direct-thermal
• Construction: 12-gauge steel frame
• ZebraLink
• ZebraNet 10/100 Print Server
• USB 2.0 port for faster connectivity and throughput
(plug and play)
• Serial and parallel ports
• Large easy-to-read front panel with multilingual
back-lit LCD display
• Transmissive and reflective media sensors
• Bi-fold media door with clear panel
• Advanced counters
• 16MB SDRAM; standard 8MB non-volatile
flash memory, optional 64MB
• Improved ribbon- and media-low
LCD/network alerts
• 300 discrete darkness settings for print quality
• Real-time clock
• Multi-level Element Energy Equalizer™ (E3™)
for superior print quality
• ZPL II – Universal language for Zebra printers
• RFID-upgrade-ready (110Xi4 only)
Environment
• Operating temp. (TT): 5°C (41°F) to 40°C (104°F)
• Operating temp. (DT): 0°C (32°F) to 40°C (104°F)
• Storage/Transport environ. -40°C (40°F) to 60°C
(140°F)
• Operating humidity: 20 to 85% non-condensing
• Storage humidity: 5 to 85% non-condensing
Media characteristics
Options and accessories
Labels
Max. roll size
• 203mm (8") O.D. on a 76mm (3") I.D. core
Thickness (label & liner)
• 0.076mm (0.003") to 0.305mm (0.012")
Media type
• Continuous fanfold, die-cut or black mark
For optimum print quality and printer performance,
use genuine Zebra Supplies.
• Rewind
• Label peel
• Cutter
• Media supply spindle for 75mm cores
(standard on 110Xi 4 – 600dpi)
• Scalable and international fonts
• Applicator interface
Ribbons
Ribbon is recommended to be at least
as wide as media.
Max. roll size
• 81.3mm (3.2") O.D. on a 25.4mm (1") I.D. core
Standard lengths
• 450m (1,476') or 300m (984'); provides 3:1
and 2:1 media roll-to-ribbon ratios
Ribbon setup
• Ribbon wound ink-side out
Electrical
• Universal power supply with power-factor
correction 90–264VAC; 48–62Hz
Communication interface capabilities
• USB 2.0 port (480Mbits/second)
• RS-232C/422/485 multi-drop
• Hi-speed, bi-directional, IEEE 1284 parallel
interface
Agency approvals
• Bi-National UL 60950 Third Edition/CSA CAN/CSAC22.2 No. 60950-00 Third Edition; IEC 950/
EN 60950: 1992 w/amendments 1 to 4 (CB
Scheme); EN 55022: 1998 Class B; EN 55024:
1998; EN 61000-3-2, 3 w/amendment A12;
Canadian ICES-003, Class B, FCC Class B;
Argentina 92/98 Phase 3; Australia AS/NZS 3548;
R.O.C. CNS 13438; BSMI; CCC
Firmware
• ZPL II (standard)
• XML-enabled
• Web View
• Alert
• ZBI
Fonts and graphics
Fonts and character sets
• Standard fonts: 7 bitmapped, 1 smooth-scalable
(CG Triumvirate™ Bold Condensed)
Contains UFST® from Agfa Monotype Corporation
• Pre-loaded Unicode™-compliant scalable fonts
for EMEA character sets
• Sets: IBM Code Page 850 International
character set
Graphics features
• Supports user-defined fonts and graphics
– including custom logos
Bar code symbologies
• Linear bar codes: Codabar, Code 11,
Code 39, Code 93, Code 128 with subsets
A/B/C and UCC Case C Codes, EAN-8,
EAN-13, Industrial 2 of 5, Interleaved 2 of 5,
ISBT-128, Logmars, MSI, Planet Code, Plessey,
Postnet, Standard 2 of 5, UPC-A, UPC-E, UPC
and EAN 2 or 5 digital extensions
• Two-dimensional: Codablock, Code 49,
Data Matrix, GS1 DataBar (RSS), MaxiCode,
MicroPDF417, PDF417, QR Code, TLC 39
ZebraLink Solutions
Software
• ZebraDesigner Pro
• ZebraDesigner
• ZebraNet Bridge Enterprise
• ZebraNet Utilities v 7.0
• ZBI-Developer
Networking
• ZebraNet Wireless Plus Print Server
• ZebraNet 10/100 Print Server
• IBM® twinax/coax interface
Thinking about mobilising your workforce?
The use of mobile printers in a warehouse or supply-chain environment improves productivity
and provides a fast return on investment.
To find out how your business could benefit from a Zebra mobile-printing solution,
please visit www.bbk-gmbh.de
*Specifications subject to change without notice.
©2010 ZIH Corp. E3, Element Energy Equalizer, ZBI, ZBI-Developer, ZebraDesigner, ZebraLink, ZebraNet and all product names and numbers are Zebra trademarks, and Zebra, the representation of Zebra Head, ZebraNet,
and ZPL II are registered trademarks of ZIH Corp. All rights reserved. CG Triumvirate is a trademark of Agfa Division, Miles Inc. UFST is a registered trademark of Agfa Monotype Corporation. Unicode is a trademark of
Unicode, Inc. IBM is a registered trademark of International Business Machines Corporation. All other trademarks are the property of their respective owners. For optimal printing quality and proper printer performance
across our product line, Zebra strongly recommends the use of genuine Zebra supplies as part of the total solution. Specifically, the Xi series printers are designed to work only with genuine Zebra printheads, thus
maximising safety and print quality.
BBK Etikettier- und Sondermaschinenbau GmbH
Dieselstraße 18 • D-64743 Beerfelden
Phone: 06068 9310-0 • Fax: 06068 9310-99
www.bbk-gmbh.de • info@bbk-gmbh.de
www.zebra.com
EMEA_Zebra Xi Series datasheet_English_MS_11-10.indd 4
Please recycle after use
12511L Rev.11 (11/10)
29/10/10 17:27:05
Zebra® LP 2824 Plus™ &
TLP 2824 Plus™ printers
Two-inch (56mm) on-demand
thermal printers for labels,
receipts, tags and wristbands
Leading the way in versatile and affordable
desktop printing
These space-saving, user-friendly printers bring new levels
of performance to the Zebra Desktop family. The direct-thermal
LP 2824 Plus or combined direct-thermal/thermal-transfer TLP 2824
Plus are perfect for patient identification, pharmacy labelling, retail
product and shelf labelling or any other application where precise
narrow output is required.
Superior performance at a small price
These elegant little printers from Zebra bring fast, professional
labelling to your desk, small office, laboratory or anywhere you
need to print small numbers of bar-code labels, receipts and tags.
They are robust with a double-walled ABS casing and offer many
“big printer” features at an extremely affordable price.
Key features:
• Label handling options include:
–– Label dispenser with label
present sensor
–– Cutter
• Serial, USB or parallel configurations
• Ethernet network connection via a
factory-installed internal ZebraNet®
Print Server option
• Co-resident command language
• Unicode™
• ZBI 2.0™
However, they are designed for ease of use, so even complete
beginners will find them easy to set up and operate.
Zebra offers a wide range of supplies for
LP/TLP 2824 Plus printers, all made to a
high standard and suitable for a variety
of applications.
• Manufactured exclusively for Zebra printers
• Laboratory-tested for optimum performance
• Proven to minimise wear and tear on printheads
For more information, visit www.bbk-gmbh.de
EMEA_Zebra_LP-TLP 2824 Plus_datasheet_English_MS_01-10.indd 1
4/1/10 17:19:01
Specifications at a glance*
Standard features
• Print methods: Direct thermal or thermal transfer
• Programming languages: EPL™ and ZPL® as
standard
• Construction: Dual-wall frame
• OpenACCESS™ for easy media loading
• Auto-calibration of media
• 32-bit RISC processor
• Odometer
• Unicode
• Hardware reset button
Printer specifications
Resolution
• 8 dots/mm (203dpi)
Memory
• Standard: 4MB flash; 8MB SDRAM
• Optional: 64MB (68MB total) flash with RTC
Width
• 33mm (1.30") and 57mm (2.24")
Core inner diameter
• 12.7mm (0.5")
Operating characteristics
Environmental
• Operating temperature: 4.4°C to 41°C (40°F
to 105°F)
• Storage temperature: -40°C to 60°C (-40°F
to 140°F)
• Operating humidity: 5% to 95% non-condensing
• Storage humidity: 5% to 95% non-condensing
Electrical
• Auto-detectable (PFC-compliant) 100–240VAC,
50–60Hz
Maximum print length
• 990mm (39.0")
Agency approvals
• Emissions: FCC Part 15, Subpart B, VCCI, C-Tick
• Emissions and Susceptibility: (CE): EN 55022
Class B, EN 61000-3-2, EN 61000-3-0 and
EN 55024, CCC
• Safety: CB Scheme IEC 60950:1991 +A1 +A2
+A3 +A4, TÜV, NRTL, IRAM, NOM, AAMI, CCC
Maximum print speed
• 102mm (4") per second
Physical characteristics
Print width
• 56mm (2.2")
Media sensors
• Fixed reflective and transmissive sensors
Width
• Direct thermal 107mm (4.2")
• Thermal transfer 126mm (5.0")
Media characteristics
Height
• Direct thermal 176mm (6.9")
• Thermal transfer 178mm (7.0")
Maximum label and liner length
• Maximum non-continuous: 990mm (39")
Depth
• Direct thermal 214mm (8.4")
• Thermal transfer 235mm (9.3")
Maximum label and liner width**
• 19mm (0.75") to 60mm (2.36")
Maximum media roll size
• 127mm (5") O.D.
Weight
• Direct thermal 1.2kg (2.7lb)
• Thermal transfer 1.6kg (3.5lb)
Media thickness
• 0.076mm (0.003") to 0.18mm (0.0071")
Media types
• Roll-fed or fanfold, die-cut or continuous directthermal labels with or without black mark, tag
stock, continuous receipt paper, wristbands
Ribbon characteristics
Outside diameter
• 35mm (1.36")
Length
• 74m (244’) when using 0.08mm ribbon thickness
Ratio
• 1:1 media roll to ribbon
ZebraLink™ Solutions
Software
• ZebraDesigner™ driver
• ZebraDesigner Pro
• ZebraDesigner
• ZebraNet Bridge Enterprise
• Zebra setup utilities
• Zebra universal driver
• ZBI-Developer™
Firmware
• EPL2™
• EPL line mode
(Direct thermal only – LP 2824 Plus printer only)
• ZPL II®
• XML-enabled printing
• ZBI 2.0
• Web View
• Alert
Communication and
Interface capabilities
• RS-232 serial interface, DB-9
• USB 1.1, bi-directional
• Parallel (Centronics®), bi-directional
• ZebraNet 10/100 Print Server (optional)
Fonts/graphics/symbologies
Fonts and character sets
• 16 resident expandable ZPL II bitmap fonts
• One resident scalable ZPL font
• Five resident expandable EPL2 fonts
• Native OpenType™ font support
• Unicode-compliant for
multi-language applications
Graphics features
• Supports user-defined fonts and graphics
including custom logos
• ZPL II drawing commands for boxes and lines
Bar code symbologies
• Bar code ratios: 2:1 (non-rotated) and 3:1
for EPL and ZPL except where noted
• Linear bar codes: Codabar, Code 11 (ZPL),
Code 39, Code 93, Code 128, EAN-8,
EAN-13, EAN-14 (ZPL), German Post Code
(EPL), GS1 DataBar (RSS), Industrial 2-of-5 (ZPL),
Interleaved 2-of-5, ISBT-128 (ZPL), Japanese
Postnet (EPL), Logmars (ZPL), MSI, Plessey,
Postnet, Standard 2-of-5 (ZPL), UCC/EAN-128
(EPL), UPC-A, UPC-A and UPC-E with EAN 2 or 5
digit extensions, UPC-E, UPC and EAN 2 or 5 digit
extensions (ZPL)
• Two-dimensional: Codablock (ZPL), Code 49 (ZPL),
Data Matrix, (ZPL), MaxiCode, MicroPDF417,
PDF417, QR Code
Options and accessories
• Label dispenser with label-present sensor
• ZebraNet 10/100 Print Server – internal or external
Ethernet options for network communication
and printing
• Cutter for various media types
• Font packs – Asian and other international
font kits
• KDU Plus™ and KDU keyboard display units for
standalone printing solutions
Thinking about mobilising your workforce?
The use of mobile printers in a warehouse or supply-chain environment improves productivity and provides a fast return
on investment.
To find out how your business could benefit from a Zebra mobile-printing solution,
please visit www.bbk-gmbh.de
*Specifications subject to change without notice.
** Use of the optional media adaptor kit supports narrow media such as wristbands from widths between 15mm (0.59") and 37mm (1.46"). LP 2824 Plus printer only.
©2010 ZIH Corp. EPL, EPL2, KDU Plus, OpenACCESS, ZBI 2.0, ZBI-Developer, ZebraDesigner, ZebraLink and all product names and numbers are Zebra trademarks, and Zebra, representation of Zebra Head, ZebraNet,
ZPL and ZPL II are registered trademarks of ZIH Corp. All rights reserved. Centronics is a registered trademark of Centronics Data Computer Corporation. OpenType is either a registered trademark or a trademark of
Microsoft Corporation in the United States and/or other countries. Unicode is a trademark of Unicode, Inc. All other trademarks are the property of their respective owners.
BBK Etikettier- und Sondermaschinenbau GmbH
Dieselstraße 18 • D-64743 Beerfelden
Phone: 06068 9310-0 • Fax: 06068 9310-99
www.bbk-gmbh.de • info@bbk-gmbh.de
www.zebra.com
EMEA_Zebra_LP-TLP 2824 Plus_datasheet_English_MS_01-10.indd 2
12600L Rev.2 (01/10)
4/1/10 17:19:01
Zebra® G-Series™ printers
Making a difference to your desktop
Zebra’s G-Series compact desktop printers deliver best-in-class
speed and performance for print widths up to 104mm (4"). From
the basic GK™ model to the feature-rich GX™ model, the G-Series
printers offer a reliable, durable and flexible desktop solution for any
printing application and budget.
Built with Zebra durability and reliability, the G-Series GK model
provides the best value of all basic desktop thermal printers,
while the premier GX model supports a variety of industries and
applications with the widest range of features. Choose the spacesaving direct-thermal version of either model for the smallest
footprint of any 104mm (4") desktop printer, or the direct-thermal/
thermal-transfer version to save users time with the easiest ribbonloading system available.
With both EPL™ and ZPL® native on all models and a variety of
connectivity options for personal, local and networked systems,
the G-Series printers integrate easily and seamlessly with other
Zebra printing solutions.
Zebra’s G-Series printers
support many applications,
including:
Healthcare:
• Patient identification
• Sample and specimen identification
• Sterile services labelling
• Pharmacy prescription labelling
Retail:
• Product labelling
• Price mark-down
• Shelf-edge labelling
• Voucher and receipt printing
Travel:
• Boarding passes
• Bag tags
Hospitality, service & leisure:
• Event and exhibition ticketing
• Fast-food labelling
• Gaming and betting slips
Supply chain:
• Process, product and
shipping labelling
Post & parcel:
• Electronic franking
• Address labelling
Information correct for G-series r2.0 configurations manufactured from March 2011.
Specifications at a glance*
Standard features
Ribbon characteristics
• Print methods: Thermal transfer or
direct thermal
• Construction: Die-cast aluminium base,
frame and printhead mechanism
• Metal media cover with large clear window
• Element Energy Equalizer™ (E3®) for superior
print quality
• Auto-calibration
• Real-time clock
• Auto-ranging (90–265VAC) power supply
• Colour-coded operator cues
• Multi-language control panel with back-lit
240x128 pixel display
Outside diameter
• 81.3mm/3.2"
Printer specificartions
Standard length
• 300m/984' or 450m/1,476'
Ratio
• 3:1 media-roll to ribbon. Ribbon must be at least
as wide as media
Width
• ZM400: 51mm/2.00" to 110mm/4.33"
• ZM600: 51mm/2.00" to 174mm/6.85"
Ribbon setup
• Ribbon wound ink-side out (ribbon wound ink-side
in can be used with optional ribbon spindle)
Resolution
• 8 dots per mm/203dpi; 12 dots per mm/
300dpi; 24 dots per mm/600dpi (ZM400 only)
Core internal diameter
• 25.4mm/1.0"
Memory
• Standard: 8MB flash, 16MB DRAM
• Optional: Factory-installed 64MB flash
Environmental
• Operating temperature: 0ºC to 40ºC (Direct
Thermal); 5ºC to 40ºC (Thermal Transfer)
• Storage temperature: -40ºC to 60ºC
• Operating humidity: 20–85% non-condensing
• Storage humidity: 5–85% non-condensing
Print width
• ZM400: 104mm/4.09"
• ZM600: 168mm/6.6"
Print length
• ZM400: with 203dpi: 3,988mm/157";
with 300dpi: 1,854mm/73"; with 600dpi:
991mm/39"
• ZM600: with 203dpi: 2,590mm/102";
with 300dpi 1,143mm/45"
Print speed
• 203dpi: 254mm/10" per second
• 300dpi: 203mm/8" per second
• 600dpi: 102mm/4" per second
Operating characteristics
Electrical
• Universal auto-ranging (PFC-compliant) power
supply 90–265VAC; 48–62Hz
Agency Approvals
• IEC60950-1, EN 55024, EN 61000-3-2,
EN 61000-3-3, EN 55022 Class B
• Markings: cTUVus, CE, FCC-B, ICES-003, VCCI,
C-Tick, NOM, CCC, GOST-R, BSMI, S‑Mark (Arg),
SABS, MIC, ZIK
Physical characteristics
Media sensors
• Fixed reflective sensor
• Adjustable transmissive sensor
Width
• ZM400: 278mm/10.9"
• ZM600: 341mm/13.4"
Media characteristics
Maximum label and liner length
• Maximum non-continuous: 991mm/39"
Height
• ZM400: 338mm/13.3"
• ZM600: 338mm/13.3"
Maximum label and liner width
• ZM400 – 114mm/4.5"
• ZM600 – 178mm/7.0"
Depth
• ZM400: 475mm/18.7"
• ZM600: 475mm/18.7"
Maximum roll diameter
• 203mm/8.0"
Weight
• ZM400: 15kg/32.4lb
• ZM600: 16kg/34.7lb
Core diameter
• 76mm/3"
Media thickness
• 0.058mm/0.0023" to 0.25 mm/0.010"
Media types
• Continuous, die-cut, tags, black-mark
Shipping weight
• ZM600: 22kg/49lb
• ZM600: 24.5kg/54lb
Zebralink™ solutions
Software
• ZebraDesigner™ Pro
• ZebraDesigner for XML
• ZebraNet™ Bridge Enterprise
• ZebraNet Utilities v 7.0
• Zebra Universal Driver
• Additional scalable and bitmapped
fonts available
Networking/Connectivity
• ZebraNet Internal Wireless Plus Print Server
• ZebraNet 10/100 Print Server
• RS-232-C serial port
• High-speed IEEE 1284 bi-directional
parallel interface
• USB 2.0
Firmware
• ZPL II®
• EPL™
• XML-enabled printing
• Web View
• Alert
• ZBI 2.0
• ZBI Developer
Fonts/graphics/symbologies
Fonts and character sets
• 7 bitmapped, 1 smooth-scalable
• Native open type font support
• Global printing – Unicode™-compliant for
fast multi-language on-demand thermal
printing right out of the box
• Contains UFST® from Monotype Imaging Inc.
Graphic features
• Supports user-defined fonts and graphics,
including custom logos
• ZPL II drawing commands for boxes
and lines
Bar code symbologies
• Linear Bar Codes: Codabar, Code 11,
Code 16k, Code 39, Code 93, Code 128 with
subsets A/B/C and UCC Case C Codes, EAN8, EAN-13, Industrial 2-of-5, Interleaved 2-of-5,
Logmars, MSI, Planet Code, Plessey, Postnet,
Standard 2-of-5, UPC-A, UPC-E, UPC and EAN
2 or 5 digit extensions
• Two-Dimensional: Aztec, Codablock, Code 49,
Data Matrix, GS1 DataBar (RSS), MaxiCode,
MicroPDF417, PDF417, QR Code, TLC 39
Options and accessories
• Cutter with catch tray
• Peel – a front-mount, passive-peel option
with no liner take-up
• Liner take-up (works with peel option) –
full-roll liner take-up spindle (fits standard
base, ZM400 only)
• Rewind – internally rewinds full label roll
on 3 (76mm) core (comes with taller,
non-standard printer base)
• RS-422/RS-485 serial port adaptor
• Optional ribbon spindle to support ribbon
wound ink-side in (ZM400 only)
Thinking about mobilising your workforce?
The use of mobile printers in a warehouse or supply-chain environment improves productivity and provides
a fast return on investment.
For more information, visit www.bbk-gmbh.de
*Specifications subject to change without notice.
©2010 ZIH Corp. Element Energy Equalizer, EPL, Genuine Zebra Supplies, ZebraDesigner, ZebraLink, ZebraNet and all product names and numbers are Zebra trademarks, and E3, Z Series, Zebra, representation of
Zebra Head, ZebraNet and ZPL II are registered trademarks of ZIH Corp. All rights reserved. Unicode is a trademark of Unicode, Inc. UFST is a registered trademark of Monotype Imaging, Inc.
All other trademarks are the property of their respective owners.
BBK Etikettier- und Sondermaschinenbau GmbH
Dieselstraße 18 • D-64743 Beerfelden
Phone: 06068 9310-0 • Fax: 06068 9310-99
www.bbk-gmbh.de • info@bbk-gmbh.de
www.zebra.com
12539L Rev.7 (06/10)
Zebra ZT400™ Series
®
Keep your critical operations
running efficiently with Zebra’s
durable ZT400 Series printers,
designed for years of performance
in a wide array of applications.
The ZT400 Series builds on the
field-proven reliability of the
Z Series™ with advancements
in print speed, print quality and
connectivity options. Designed
for ease of use, the ZT400 Series
printers offer an intuitive iconbased LCD graphical user interface
and easy-loaded supplies. And,
they also include standard USB,
Serial, Ethernet and Bluetooth®
capabilities. Expanded RFID
capacities deliver greater tracking
abilities, deeper visibility and
enterprise insights.
Zebra ZT400 Series Data Sheet
The ZT400 Series is offered in both
104mm (4”) and 168mm (6”) models
and comes standard with an
extensive set of advanced features
that ensure your printer investment
will always meet your needs, now
and in the future. Constructed
using an all-metal frame and bifold door, this printer is designed
to fit well in space-constrained
environments.
Featuring Zebra’s Link-OS
environment – an innovative
operating system combining a
powerful Multiplatform Software
Development Kit (SDK) and
software applications – ZT400
Series printers are easy to integrate,
manage and maintain from any
location around the globe.
®
Ideal for These Applications
Manufacturing: work-in-process,
product ID/serial numbers,
packaging labels, receiving/putaway labelling
Transportation & Logistics:
order picking/packing, shipping/
receiving, cross-docking,
compliance labelling
Retail:distribution centers,
back-of-store operations
Healthcare: laboratory labels,
blood-bank labels, asset tracking,
pharmacy labelling
1
ADVANCED INDUSTRIAL PRINTING.
RUGGED DURABILITY.
LOADED WITH FEATURES.
Designed to grow with your evolving business needs, the ZT400
features increased processing capabilities and an open operating architecture providing flexibility to support your ever-growing
and changing application requirements.
Application Flexibility
• Expand your printing readiness through an exceptional range of media capabilities and media delivery
options.
• Customise your printer to match your current and future business needs with end-user-installable media
handling options.
• Standard Serial, USB, Ethernet and Bluetooth features – as well as two open media slots – allow you
to utilise optional connectivity options.
• Expanded RFID capabilities are easy to install and
simple to use.
• Ensure quality output for small-label applications
with high-resolution printing capabilities.
Effortless to Integrate
•USB host port enables simple printer configuration
by easily transferring data from a USB flash drive
via mirroring and expanded mapped-drive memory
capabilities.
•Virtual Devices apps enable Link-OS printers to
support well-known legacy and competitor printer
languages – in addition to ZPL® and EPL™– for a
future-proofed investment.
Zebra ZT400 Series Data Sheet
Easy to Operate
•Dynamic QR codes provide on-demand, web-based
support to resolve printer errors quickly.
•Print Touch-enabled Link-OS printers offer web page
launching features using Near Field Communication
(NFC), making it easy to access Zebra’s extensive
knowledge base of how-to videos and product
support.
•Lighted media and ribbon paths make it easy to see
inside the printer, even in poorly lit environments.
Simple to Manage
•Zebra’s Link-OS environment delivers enhanced
capabilities to monitor, manage and maintain your
printer from any location.
•Cloud Connect allows Link-OS printers to securely
and directly interact with the Cloud for printing and
device management.
•Profile Manager enables you to edit and manage one
printer, batches of printers or all Link-OS printers
across your network anywhere in the world.
2
COMPARING THE ZT410™ AND ZT420™
The ZT400 Series offers two models: the ZT410 and the ZT420.
Compare the features to see which printer best suits your needs.
ZT410
ZT420
104mm
168mm
450 m
450 m
356mm/s
305mm/s
User Interface
LCD
LCD
Print resolution
203, 300, 600 dpi
203 and 300 dpi
Printer control language
ZPL, EPL, others
ZPL, EPL, others
Maximum print width
Maximum ribbon length
Maximum print speed
ZebraCare™ Services
Genuine Zebra™ Supplies
Increase printer uptime and reduce lost productivity
and unbudgeted repair costs by selecting a ZebraCare
service agreement. A cost-effective means of
planning and budgeting for your annual maintenance
expenditures, your agreement ensures that trained
Zebra technicians will bring your printer back to factory
specifications. Zebra offers a variety of plans to fit your
budget and business needs.
Zebra provides high-quality supplies solutions for
virtually any application:
Zebra ZT400 Series Data Sheet
• The largest selection of pre-tested, labels, tags and
ribbons for your ZT400 printer.
• Ability to create custom labels in any size with preprinted text, graphics and logos.
• Supplies extensively tested to ensure print quality,
chemical resistance and adhesive strength.
• ISO 9001: 2008 certified
3
SPECIFICATIONS AT A GLANCE*
Ribbon Characteristics
Printer Name
ZT410
ZT420
RFID
(Thermal-transfer option only)
Outside Diameter
Standard Features
• Print Methods: Thermal transfer and direct
thermal printing
• Construction: Metal frame and bi-fold metal
media cover with enlarged clear viewing window
• Side-loading supplies path for simplified media
and ribbon loading
• Element Energy Equalizer™ (E3®) for superior
print quality
• Communications: USB 2.0, high-speed, RS-232
Serial, 10/100 Ethernet, Bluetooth 2.1, USB Host
• Back-lit, multiline graphic LCD display with
intuitive menu and easy-to-use keypad for quick
operation
• Bi-coloured status LEDs for quick printer status
• ENERGY STAR® qualified
Printer Specifications
Resolution
• 203 dpi/8 dots per mm
• 300 dpi/12 dots per mm (optional)
• 600 dpi/24 dots per mm (optional for ZT410 only)
Memory
• 256 MB RAM memory (4 MB user available)
• 512 MB Flash memory (64 MB user available)
Maximum Print Width
104mm/4.09" (ZT410)
168mm/6.6" (ZT420)
Maximum Print Speed
356mm per second/14 ips (ZT410)
305mm per second/12 ips/ (ZT420)
Media Sensors
Dual media sensors: transmissive and reflective
Media Characteristics
Media width (label and liner):
• ZT410
– 25.4mm/1.00" to 114mm/4.5" tear/cutter
– 25.4mm/1.00" to 108mm/4.25" peel/rewind
• ZT420
– 51mm/2.00" to 178mm/7.0" tear/cutter
– 51mm/2.00” to 171mm/6.75” peel/rewind
Maximum non-continuous label length:
991mm/39"
81.3mm/3.2" O.D. on a 25.4mm/1.0" core
Standard Length
450 m/1476’
Width
Keyboard Display Unit
51mm/2.00" to 110mm/4.33"/
Ribbon Setup
Ribbon wound ink-side out; ribbon wound ink-side
in can be used with the optional ribbon spindle
Operating Characteristics
Environmental
• Operating Environment:
– Thermal transfer: 5º to 40ºC /40º to 104ºF
– Thermal direct: 0º to 40ºC /32º to 104ºF
– 20% to 85% non-condensing R.H.
• Storage/Transportation Environment:
– -40º to 60ºC/-40º to 140ºF/
– 5% to 85% non-condensing R.H.
Electrical
• Auto-detectable (PFC Compliant) 100-240VAC,
50-60Hz, rated at 100 Watts
• ENERGY STAR qualified
Agency Approvals
• IEC 60950, EN 55022 Class B, EN55024,
EN 61000-3-2, EN 61000-3-3
• cTUVus, CE Marking, FCC-B, ICES-003, VCCI,
C-Tick, NOM, S-Mark (Arg), CCC, CU, BSMI, KCC,
SABS, IN-Metro
Width:
Height:
Depth:
Weight:
ZT420 closed
336.55mm/13.25”
324mm/12.75”
495mm/19.50”
18.14 kg/40 lb.
Options and Accessories
Communication
• Parallel (Bi-directional interface)
• Wireless: ZebraNet® Printer Server – supports
802.11 a/b/g/n networks via an internally integrated option that enables the use of Webview
and Alert features
Media Handling
Print Length
• 203 dpi: 3988mm/157”
• 300 dpi: 1854mm/73”
• 600 dpi: 991mm/39”
Maximum Media Roll Size
203mm/8.0" O.D. on a 76mm/3" I.D. core
Media Thickness
0.058mm/0.0023" to 0.25mm/0.010"
Media Types
Continuous, die-cut, notch, black-mark
Supports KDU Plus™ and ZKDU: Enter variable data
and retrieve stored forms for standalone applications
Link-OS Solutions
Software Tools
• Document Design: Quickly design a customized print solution using your business data and
Zebra's intuitive, plug-and-print design tools.
• Device Integration: Zebra offers apps and
products designed to help you integrate Zebra
devices into your existing systems.
• Device Management: Manage your print operations locally and globally with Zebra's suite of
device management tools.
• Developer Tools: Provides you the tools you need
to create your own apps, including documentation, source code, programming languages,
templates and more.
Firmware
• Resident ZPL, ZPL II® and EPL programming
languages, selectable through software or front
panel.
• XML-enabled Printing — allows XML communications for barcode label printing.
Barcode Symbologies
Physical Characteristics
ZT410 closed
269mm/10.6”
324mm/12.75”
495mm/19.50”
16.33 kg/36 lb.
• Supports tags compatible with UHF EPC Gen 2
V1.2/ISO 18000-6C
• Integrated RFID system is user-upgradable in the
field and available on both 104mm and 168mm
models
• Adaptive Encoding Technology automatically
selects optimum encode settings
• Rewind: internally rewinds a full roll of printed
labels on 76mm (3”) core, or peels and rewinds
liner (Factory installed only)
• Peel: Front mount, passive peel option
• Peel: Liner take-up option – additional full roll
liner take-up spindle accommodates standard
printer base
• Cutter: Front mount guillotine cutter and
catch tray
• 25.4mm (1”) I.D. Core media supply hanger
• Ink-side in ribbon supply spindle
• Linear Barcodes: Code 11, Code 39, Code 93,
Code 128 with subsets A/B/C and UCC Case
Codes, ISBT-128, UPC-A, UPC-E, EAN-8, EAN-13,
UPC and EAN 2- or 5-digit extensions, Plessey,
Postnet, Standard 2-of-5, Industrial 2-of-5,
Interleaved 2-of-5, Logmars, MSI, Codabar, Planet
Code
• 2-Dimensional Barcodes: Codablock, PDF417,
Code 49, DataMatrix, MaxiCode, QR Code, TLC
39, MicroPDF, RSS-14 (and composite), Aztec
Fonts and Graphics
• 16 resident expandable ZPL II bitmap and two
resident scalable ZPL fonts
• Asian and other international scalable and
smooth bitmapped fonts
• Unicode: For multi-language printing
• Downloadable objects include graphics, scalable
and bitmap fonts, label templates and formats
• IBM Code Page 850 international character sets
are available in the fonts A, B, C, D, E, F, G and 0
through software control
• Code Page 1250, 1252, 1253, 1254, 1255 Support
with font 0
Zebra Technologies – EMEA Headquarters & Sales
Office
BBK
Etikettier- und Sondermaschinenbau
Zebra Technologies Europe Limited, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5XF, United Kingdom
Telephone: +44 (0)1628 556000 Fax: +44 (0)1628
556001 Email:18
mseurope@zebra.com
Web: www.zebra.com
Dieselstraße
• D-64743 Beerfelden
GmbH
Other EMEA Locations
Phone: 06068 9310-0 • Fax: 06068 9310-99
Europe: France, Germany, Italy, the Netherlands, Poland, Russia, Spain, Sweden, Turkey
Middle East & Africa: Dubai, South Africa
www.bbk-gmbh.de • info@bbk-gmbh.de
www.zebra.com
©2014 ZIH Corp. All product names and numbers are Zebra trademarks, and Zebra and the Zebra head graphic are registered trademarks of ZIH Corp.
All rights reserved. All other trademarks are the property of their respective owners.
Please recycle after use
12648L_Rev.0 (05/14)
Labelprinter swiftcolor SCL-4000 D
Digital inkjet color printer with "single-pass technology"
The Digital Inkjet Color Printer SCL-4000D of swiftcolor with "single-pass technology" is used in
many different applications:
Shipping case marks, address stickers, baggage tags, barcodes, cosmetic, health care product, prescription medicine packaging, gourmet food and bottle labels and MORE!
Features:
• High speed 7.9ips (200mm / sec)
• High quality 600 dpi and 1200 dpi
• Desktop, compact and lightweight
• 4Multi-color printing (4 color/BK, C, M, Y)
• Single-pass printhead architecture
Technical data
Label printer
SCL-4000D
Print Technology
Type of Ink
Print Color
Weight
Dimensions (w x d x h)
Print Resolution
Number of Print Heads
Print Speed
Print Area
Max Width
Length
Margins
Material
Media Size
Media Roll Size
Interface
Top/Bottom
Left Right
Type of Media
Type of Paper
Width
Length
Thickness
Outer Diameter
Core diameter
Data Transmission
Extension
Operating system
Power Supply
Power Consumption Maximum
Operating Environment Temperature/Humidity
Ink Cartridges
Color
Capacity
Option
Inkjet ("single-pass technology")
Dye based ink
4 color (BK, C, M, Y)
52.91 lbs (24kg) excluding head & ink cartridge
15.19 x 22.44 x 15.51 inches (386 x 570 x 394 mm)
max. 1200 x 1200dpi
4
1.96 - 7.87 inches (50 - 200 mm)/sec
4.17 inches or less (105.9 mm or less)
0.11 - 15.62 inches (3.0 - 397.0 mm)
borderless printing generally possible!
0.05 inches (1.5 mm) standard
0.010 inch (2.7 mm) including liner
Exclusive roll paper (label, tag) Exclusive fanfold paper
Label/gap, Label/mark, Tag/mark,
Continuous paper (without TOF)
1-4.72 inches (25.4-120 mm)
0.23 - 15.74 inch (6.0 - 400 mm)
145 – 255 µm (label/tag)
ø7.87 inch (200 mm) and less
ø3.00 ± 0.03 inches (76.2 ± 1.0 mm)
External supply possible
USB2.0 Hi-speed function, Giga Bit Ethernet
RS232C 1, RS232C 2, interface for option
WinXP 32bit, Vista 32bit, Win7 32bit (64bit available soon)
AC 100-240V, 50-60Hz
250W (TBD) (printer only)
59°F (15°C) 10% - 86°F (30°C) 80%
Cyan/Magenta/Yellow/Black (CMYK)
240ml for each color
Auto cutter
* Specifications subject to change without notice.
Simple ink cartridge replacement
Easy label roll replacement
Print module available for other
systems, production lines and kiosks
Single-pass printing
(SCL-4000D)
Serial printing Media
Labelprinter
Epson ColorWorks C3500
Serial Inkjet Printer
With the Epson ColorWorks C3500, you can easily customise and print your own colour labels.
Whether it’s printing packaging labels with colourful logos and pictures, or tickets and ID cards with
important barcodes and product information, this printer ensures you can print it all from one machine.
This all round colour label printer also helps you conform to GHS international chemical labelling
guidelines, as its pigment ink combination with the PE Matte Label media are ideal for use in harsh
environments, providing accurate and smudge-proof printouts, that are resistant to water and
most chemicals.
Technical data
Label printer
ColorWorks C3500
Print Technology
Type of Ink
Print Color
Weight
Dimensions (w x d x h)
Print Resolution
Print Speed
Print Area
Max. Width
Length
Material
Type of Paper/printing medium
Media Size
Media Roll Size
Interface
Power consumption
Reliability
Supply voltage
Power Supply
Temperature/
humidity
Ink Cartridges
Min.
Max.
Outer Diameter
Standby
Printing
MCBF
MTBF
Printing
Storage
Color
Nozzle Configuration
Option
Serial Inkjet Printer
Epson DURABrite™ Ultra
Black, Cyan, Yellow, Magenta
12 kg
310 x 283 x 261 mm
max. 720 x 360 dpi
56 – 103 mm/sec.
104 mm
Endless
Continuous label, Continuous paper,
PDie-cut label, Black mark paper,
Black mark label
30 mm
112 mm
max. 101,6 mm
Ethernet interface (100 Base-TX/10 Base-T)
USB 2.0 Typ A
Appx. 3 W
Appx. 30 W
9.800.000 passes
88.000 Hours
AC 100 ~ 240 V, 50 ~ 60 Hz
External
10 - 35°C ( 20 - 80% RH)
-20 - 60°C ( 5 - 85% RH)
cyan/magenta/yellow/black (CMYK)
360 Nozzles per colour
Autocutter
PRODUCT FEATURES:
•
•
•
•
•
Long-lasting prints:
Fast print speeds:
Matte, glossy and more:
Easy operation:
Cost Savings:
Durable pigment ink
Label printing up to 103 mm/sec.
Print on a variety of media
LCD screen display for ink and printer status
Individual ink cartridges
Epson ColorWorks C7500
Desktop Label color printer
Print high-quality labels in-house and on-demand. Ensuring consistent results every time, the
ColorWorks C7500 features Epson's new PrecisionCore MicroTFP printhead with unique Nozzle
Verification Technology (NVT) and dot substituion to ensure consistent prints and prevent dead pixels.
Quickly and easily produce a range of high-quality labels for food and beverage products, packaging
and boxes, EU energy labels, GHS labels and more. With print speeds of up to 300mm/sec, you can
now print labels in full colour at the same speed as some thermal monochrome printers, with no
compromise on print quality.
Printing labels on-demand eliminates the cost associated with pre-printing labels, such as wastage
and having to store a large label inventory. High-capacity, individual ink cartridges mean only the
colour used needs to be replaced, helping reduce the cost per print, while the printhead is designed
to last for the lifetime of the printer1, so you should never need to buy a replacement.
Technical data
Label printer
ColorWorks C7500
Printing method
Nozzle configuration
Colours
Ink technology
Category
Printing speed
Resolution
Printing width
Media format
Media width
Media type
Interfaces
Power supply
Supply voltage
Temperature/
humidity
Power consumption
Printing
Storage
Standby
Printing
Product dimensions
Product weight
Option
PrecisionCore MicroTFP line printer
600 nozzles per colour
Black, Cyan, Yellow, Magenta (C, M, Y, K)
Epson DURABrite™ Ultra
Desktop Label color printer
Max. 300mm/sec at 600 × 1200dpi (printing width 108mm)
Max. 600x1200 dpi
Max. 108 mm
Roll (8" external diameter), fanfold media
Min. 50 mm, Max 112 mm
Die-cut label, black mark paper,
black mark label
Ethernet interface (100 Base-TX / 10 Base-T),
USB 2.0 Type A
Internal
AC 100 ~ 240 V, 50 ~ 60 Hz
-20 - 60° C (5 - 85% RH)
5 - 35° C (20 - 80% RH)
Appx. 41 W
Appx. 86 W
392 x 598 x 395 mm (width × depth × height)
37 kg
Autocutter
PRODUKT FEATURES:
• Reliable performance — rugged design means minimal maintenance and a low overall cost of
ownership; ideal for busy, on-demand environments
• Powerful productivity — Just in Time Color printing for high-volume labeling applications
• High-speed, on-demand, color printing — speed through multiple full-color labels with variable
data up to 11.8" per second
• Durable labels — BS-5609 certification means labels won’t smudge, smear or fade
• Low cost of labeling — up to 50 percent lower printing cost than with laser and thermal transfer
printers for high-durability color labels
• Seamless integration — built-in ESC/Label language means you can use the printer with your
existing workflow, and even add color with simple programming extensions
• Astounding image quality — powered by PrecisionCoreTM inkjet technology from Epson; delivers
precise barcodes and ultra sharp text
• Highly efficient — high-yield ink cartridges mean fewer user interventions and less waste than
most thermal transfer printers; easy to change, so there’s less downtime
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising